REICHELT IE: Amplifiers receivers
The Best
AXING BVS 10-01 - Miniature inline amplifier
61.58 EUR
Miniature inline amplifier, 18 - 20 dB• Cast housing
• Remote power feed
• Frequency range: 47 - 862 MHz
• Noise factor: <6 dB
• Output level: 104 dBµV
• Connections: F socket
• Dimensions: approx. 85 x 26 x 20 mm
Included with delivery:
• Inline amplifier
• Power supply unit
• Remote feed switch (F connector)
• Mounting base
Top Pick
DYNAVOX 201403 - Stereo phono pre-amplifier
51.24 EUR
Low-noise pre-amplifier with RIAA equalisation,• allows you to connect record players with magnetic system to systems with line, AUX, MD or CD inputs (IN).
• Also suitable for audio mixing console, sound cards and for professional applications.
Excellent
MON SA-200 - Monacor universal stereo amplifier, 100 W
185.61 EUR
- Silent operation due to fanless cooling concept
- Stereo line input
- Speaker connection via terminal strip
- Override LEDs (clip)
- Volume control
- 482-mm (19'') rack installation, 1U, with supplied mounting brackets
Recommended
VIS AMP 2.2LN - VISATON stereo amplifier with level controller
47.78 EUR
Stereo amplifier with level controller, e.g. for multimedia applications. Suitable for operating small speakers with impedance of 4 to 8 ohm.Robust metal housing with two mounting tabs. Can be connected directly to the line out or headphone socket of a PC audio card, while the input sensitivity is adjusted via the level control. The voltage (12 V) is supplied via a power supply unit (not included) or a computer supply voltage. Short-circuit-proof.
High signal-to-noise ratio.
Applications:
• Info terminals
• Computer monitors
• Showcases
Technical data:
• Supply voltage: 12 V DC
• Quiescent current: 46 mA
• Input impedance: 10 kOhm
• Max. power consumption: 1.1 A
• Output power (sine, 1%/5%/10% THD):
- 2 x 1.5/2.5/3.2 W (4 ohm)
- 2 x 1.7/1.9/2.1 W (8 ohm)
• Input voltage (full power): 700 mV
• Output impedance: 1.1 Ohm
• Signal-to-noise ratio: 81 dB (A)/78 dB (external)
• Transmission range (-3 dB): 40 Hz – 40 kHz
• Input/output connection: Jack socket, 3.5 mm stereo
• DC connection:
- 5.4 mm diameter external (-)
- 2.1 mm diameter internal (-)
• Net weight: 0.178 kg
• Temperature range: -10 - 50°C
Featured
MON SA-160BT - Monacor stereo amplifier, 2x 30 W
216.57 EUR
With Bluetooth interface, NFC and remote control- Integrated Hi-Fi audio amplifier
- For speakers with 8-ohm impedance
- Volume control with integrated source selection function, LED display
- Near Field Communication (NFC)
- Gold-plated speaker terminals
- 1 stereo input via L/R RCA jacks
- 1 line output via 3.5 mm stereo jack
- Fixed aerial
- Metal enclosure
- Powered via the included power supply unit
Alternative
MAXTRACK MATR CS37L - AV to HDMI converter, with upscaler
19.24 EUR
RETRO hardware finally via HDMIIndispensable for lovers of old-school consoles.
Many new Smart TVs do not have a Scart connection, but your old games console only has an AV composite interface. Would you still like to enjoy the gaming experience with Nintendo 64, GameCube or PlayStation 2 on your HDMI playback device such as an LED TV or would you like to use your old video recorder? No problem, it's possible with our CS 37 L.
AV to HDMI adapter
Our CS 37 L is designed to convert an analog image and sound transmission into a digital signal. The effect of the conversion ultimately depends on the quality of your AV source.
Wide compatibility
This AV to HDMI adapter supports PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N standard. Suitable for connecting AV devices with composite output such as DVD players, Blu-Ray players, game consoles, TV receivers or computers to devices with HDMI input such as projectors, monitors, TVs and much more.
Plug and play
No external drivers are required for installation. Simply connect the converter to the playback device and input source and you are ready to enjoy your games or videos.
- Input 3x RCA: supports PAL, NTSC3.58, NTSC 4.43, SECAM, PAL/M, PAL/N,
- HDMI output: 1080p/60Hz, 720p/60Hz,
- incl. USB connection cable for power supply
TRENDNET TRN TI-IG90 - Power over Ethernet (4PPoE) Gigabit injector
185.61 EUR
Hardened industrial 90 Watt Gigabit 4PPoE injector for industrial applications- Hardened industrial Gigabit PoE injector with protection class IP30
- PoE (15.4 Watt), PoE+ (30 Watt), or 4PPoE (90 Watt) Power
- Network a PoE device up to 328 feet (100 meters) away
- Extreme operating temperature range from -40 to 75 °C (-40 to 167 °F)
- Redundant power supplies with overload protection
- Includes DIN rail bracket and wall mount
TRENDnet's TI-IG90 is a reliable IP30 protected industrial Gigabit 4PPoE injector with hardened components for extreme and harsh industrial environments.
Connect the TI-IG90 industrial PoE injector to a non-PoE Gigabit switch, then run an Ethernet cable up to 100 meters (328 feet) to network a PoE device.
The TI-IG90 Industrial PoE Injector supplies power to a PoE, PoE+, UPoE or 4PPoE device (up to 90 watts).
This industrial PoE injector has two redundant power inputs with overload protection to support applications without downtime.
Both DIN rail and wall mounts are included with the industrial PoE injector.
4-Pair PoE (4PPoE)
Supplies power to a PoE (up to 15.4 watts), PoE+ (up to 30 watts) or 4PPoE (up to 90 watts) device
Easy installation
No configuration required, simply connect a PoE network device to the industrial PoE injector
Gigabit ports
1 Gigabit port and 1 Gigabit 4PPoEPort
PoE removal
Provides 4-pair PoE network connection up to 328 feet (100 meters) from the industrial PoE injector
LED Luminaires
LED indicators on the industrial PoE injector confirm the PoE connection
DIN rail mounting
Metal housing to IP30, incl. DIN rail mounting and wall mounting brackets
Redundant power supply
Redundant power supplies with overload protection (power supply sold separately, models: TI-S12048)
Alarm relay
Alarm is triggered by failure of the primary and/or redundant power supply
Wide temperature range
Wide operating temperature range of -40° - 75° C (-40° - 167° F) allows installation in industrial environments with extreme hot or cold conditions
Shock and vibration resistant
Shock (EN 60068-2-27), free fall (EN 60068-2-32) and vibration resistant (EN 60068-2-6)
Grounding point
Industrial PoE injector with grounding point to protect the device from external power surges
MON SA-100 - Monacor universal stereo amplifier, 50 W
183.55 EUR
- Silent operation due to fanless cooling concept
- Additional 3.5 mm jack connection with switchable sensitivity on the front panel
- Front USB port for powering and charging external devices
- Audio source switcher
- Controls for volume, bass and treble
- 6.3-mm headphone output
- Sturdy metal enclosure
OMNI 80709787 - OMNITRONIC MPVZ-250.6P PA Mixing Amp
521.32 EUR
Enormous reliability with a maximum of flexibility The Omnitronic MPVZ-250.6P ELA mixing amplifier is your reliable partner for ELA sound reinforcement systems. Thanks to its 19'' format, it is ideal for both mobile and permanent installations.
Outputs for ELA loudspeakers with 70 V and 100 V audio transformers or 4-16- Ohm loudspeakers leave nothing to be desired. In addition, you can also connect a device with line level (e.g. mixing console) to the line output. You are always flexible with 6 mixable inputs. Connect up to 3 microphones and 3 line level devices.
Control your ELA speakers conveniently via the 6 zone outputs of the MPVZ-250.6P. They are separately adjustable on the front panel with a 5-stage volume control. For you, this means the greatest possible adaptability when implementing your sound reinforcement concept.
The MPZ-250.6P also offers you an MP3 player with infrared remote control and blue backlit LCD display. It has both an SD card slot and a USB port. So you can spontaneously and flexibly play music titles from a storage medium of your choice.
Make yourself heard!
The microphone input 3 on the front panel has an adjustable priority switch. It allows you to make important announcements with automatic, continuously adjustable level reduction of all signals. Use the gong to draw additional attention to your announcement.
Protection
A fan protects the interior of your MPVZ-250.6P from overheating. In addition to a switch-on delay, it has protection circuits against overvoltage and short-circuits. In these cases, your speakers are electrically isolated from the amplifier. This protects both the MPVZ-250.6P and your speakers from damage.
6-zone PA mono mixing amp, MP3 player & IR remote, zones switchabel, 250 wattsComfortable control of PA speakers via 6-zone technology
6 PA zone outputs with separate 5-step level controls
Master PA output (70 V and 100 V)
Output for low-impedance speakers (4-16 ohms)
MP3 player with IR remote control and LCD with blue backlight
SD card slot and USB input
Folder navigation and repeat functions (1, All)
2 rear microphone inputs (6.3 mm jack, unbal.)
1 front microphone input (combination XLR/6.3 mm jack, unbal.) with adjustable priority circuit
All microphone inputs with separate level controls
3 line inputs (stereo RCA) with separate level controls
1 line output (stereo RCA)
Chime, switchable
Treble and bass control for the output signal
7-fold LED level display
Master control for the output signal
Protection circuits with LED indication: over current, short circuit, turn-on delay
The device is cooled by cooling fan
Controlling by IR remote control
(19'') 48.3 cm rack installation 2 U
Power supply:
230 V AC, 50 Hz
Power consumption:
500.00 W
Output power:
250 W...
MON SA-50 - Monacor universal stereo amplifier, 25 W
133.93 EUR
- Silent operation due to fanless cooling concept
- Additional 3.5 mm jack connection with switchable sensitivity on the front panel
- Audio source switcher
- Controls for volume, bass and treble
- 6.3-mm headphone output
- Sturdy metal enclosure
IMG STAGELINE IMG HPR-6 - Efficient stereo headphone amplifier
60.6 EUR
Efficient stereo headphone amplifier,can also be used as a small power amplifier for 4-8 O speaker systems
- Robust metal housing
- Stereo RCA input
- 6.3 mm stereo output
- Volume control and balance control
UTC UNISONIC TECHNOLOGIES µPC 4558 C - Operational amplifier, dual, DIP-8
10.16 EUR
Operational amplifier• 2x
• Housing: DIP-8
= RC 4558P
ADAFRUIT DEBO SOUND AMP2 - Developer boards - Audio amplifier, stereo, 3.7 W, class D, MAX9
22.3 EUR
This super small stereo amplifier is surprisingly powerful. It can deliver up to 3.7 watts for speakers with an impedance of 3-8 ohms.- exceeds the EMI limit unfiltered with up to 30 cm of speaker cable
- supply voltage: 2.7 - 5.5 V
- selectable amplification via 5 pins
- Dimensions: 28 x 24 x 3 mm
DYNAVOX 201605 - Stereo phono pre-amplifier
46.08 EUR
Professional phono pre-amplifier for multimedia systems. Power is supplied to this pre-amplifier via a separate power supply unit (included in delivery) in order to avoid hum being picked up.
This very low-noise amplifier is ideal for both professional use and home use.
Technical data:
- Input sensitivity: 3.4 mV/47 kohm
- Output: 300 mV/1 kohm
- Frequency range: 20 Hz - 20 kHz, ±0.5 dB
- S/N ratio: 85 dB
- Power supply: 15 V DC/200 mA
- Dimensions: 140 x 75 x 35 mm
- Colour: black
- Weight: 1.4 kg
Powered via a separate power supply unit (included).