Review Wittenberg wit k 102707 pole mount 2 pieces

WITTENBERG WIT K-102864 - Directional antenna GSM, UMTS, LTE, 2 pieces 126.74 EUR LAT 56 Duo Set , 2x LAT 56 universal antenna for LTE / GSM / UMTS / WLAN / 5G

Logarithmic-periodic antenna for all bands
Duo Set for LTE (MIMO)
covers frequencies from 790 - 2700 MHz
56 elements
Gain 9-11.5 dB
10 m coaxial cable pre-assembled
SMA connector
length 980 mm
5x cable ties included
Mounting in horizontal and vertical polarization
For LTE 800 / LTE 1800 / LTE 2600 / UMTS (3G) / GSM 900 / GSM 1800 / WI-FI (WLAN)

The SMA connection is solved directly on the cable or via an adapter from FME to SMA (enclosed if necessary).

ATTENTION!
Picture shows mounted application example - delivery without shown ''U'' universal mount! Please order separately!

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103337 - Directional antenna GSM, UMTS, WLAN, LTE, 5G, 2 pieces 151.55 EUR LAT 60 Duo Set universal outdoor antenna for LTE 800, GSM 900, DCS1800, UMTS (3G), Wi-Fi, LTE and 5G

vertical and horizontal polarization
incl. 10 m coaxial cable (POPE H155)
to SMA connector 50 Ohm
60 elements, gain 8.5-10.5 dB(i)
forward/backward ratio 23 dB VSWR 1.6 : 1
Opening angle H 52° V 44
Length: 110 cm

The Wittenberg LAT 60 antennas are universal outdoor antennas, so you receive all radio networks such as LTE 800, GSM 900, DCS1800, UMTS (3G), Wi-Fi, LTE and 5G.
The antenna can be mounted in both horizontal and vertical polarization.
With a robust design, optimal performance and a long service life, the LAT 60 antenna is convincing.

GSM frequency: 880 - 960 MHz
UMTS frequency: 1920 - 2170 MHz
LTE frequency: 698- 862, 1710 - 1880, 2500 - 2700, 3300 - 3800 MHz

Package contents:

2x LAT 60
2x 10 m connection cable

Note:
For LTE reception, 2 antennas are always required for technical reasons. For this, look for the DUO sets from Wittenberg.

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103052 - Wall mount for GSM / UMTS / LTE antennas angular shape 20.23 EUR Steel wall mount for GSM / UMTS / LTE antennas angular shape

galvanized
Angle form

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-102836 - DAB+ roof antenna, F-connector 40.91 EUR WB 301 DAB DAB+ roof antenna

Improved version with solid swivel mast clamp for horizontal or vertical mounting up to 55 mm mast

F-connector (incl. F-connector + rubber grommet)
1 element, dipole
Frequency range: 174 - 230 MHz
Gain 2.2 dBi
dimensions 74 x 41 x 25 cm

Package Contents:

Antenna
F-connector
Rubber grommet
short manual

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103237 - Antenna cable, N plug / SMA plug, 10 m 46.08 EUR Antenna connection cable 50 Ohm N male to SMA male 10 m

Connecting cable N-plug to SMA plug
inner and outer copper braid / insulation
Aluminum foil + FOAM foam
Outer jacket PCV (suitable for outdoor use)
Impedance 50 Ohm +/- 2
Outer diameter 5,4 mm
Temperature range -40°C to +80°C
Weight approx. 48.4 kg / km
Capacity 82 pF / m at 1 kHz

Attenuation values per 100 m:

50 MHz 6.5 dB
100 MHz 9.3 dB
230 MHz 14.1 dB
300 MHz 16.3 dB
470 MHz 16.9 dB
600 MHz 18.2 dB
1000 MHz 30.9 dB
1350 MHz 35.9 dB
2150 MHz 46.9 dB

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103336 - Directional antenna GSM, UMTS, WLAN, LTE, 5G 66.79 EUR LAT 60 universal outdoor antenna for LTE 800, GSM 900, DCS1800, UMTS (3G), Wi-Fi, LTE and 5G

vertical and horizontal polarization
incl. 10 m coaxial cable (POPE H155)
to SMA connector 50 Ohm
60 elements, gain 8.5-10.5 dB(i)
forward/backward ratio 23 dB VSWR 1.6 : 1
Opening angle H 52° V 44
Length: 110 cm

The Wittenberg LAT 60 antennas are universal outdoor antennas, so you receive all radio networks such as LTE 800, GSM 900, DCS1800, UMTS (3G), Wi-Fi, LTE and 5G.
The antenna can be mounted in both horizontal and vertical polarization.
With a robust design, optimal performance and a long service life, the LAT 60 antenna is convincing.

GSM frequency: 880 - 960 MHz
UMTS frequency: 1920 - 2170 MHz
LTE frequency: 698- 862, 1710 - 1880, 2500 - 2700, 3300 - 3800 MHz

Package contents:

1x LAT 60
1x 10 m connection cable

Notice:
For LTE reception, 2 antennas are always required for technical reasons. For this, look for the DUO sets from Wittenberg.

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-102100 - Directional antenna, GSM 900, GSM 1800, UMTS 61.58 EUR LAT 54, log/per combination antenna

GSM 900/1800 D + E network
UMTS,vertical polarization
incl. 10 m connection cable
with SMA connector 50 Ohm
54 elements
Gain 10-12 dB(i)
Forward/backward ratio 22 dB
VSWR 1.6:1,
aperture angle H 43° V 34
Length: 562 mm

For reception enhancement in areas with weak network coverage. Simply mount the station antenna on an outside wall of your house or on the roof of your house on the existing antenna mast using the optional wall bracket. It is suitable for D and E networks, as well as for UMTS networks and can be mounted horizontally or vertically.

Package contents:

Wittenberg Antennas LAT 54 combi antenna
562 mm long antenna support

SEE OFFER SEE OFFER ebay

WITTENBERG WIT POLY-103342 - Wall antenna, 5G, omnidirectional, SMA 61.58 EUR LTE/GPRS/UMTS antenna 2/5dBi 617-6000 MHz 5 m SMA (m)

The WB 516 antenna is a cost-effective omnidirectional broadband antenna for 5G/4G/3G/2G devices and is suitable for external or internal installation.

Frequencies: 617-960 / 1710-6000MHz
Gain: 698-960 MHz 2dBi, 1710-6000 MHz 5dBi
Polarization: Vertical
Radiation pattern: Omni-directional
Resistance: 50 OHM
Max. input power: 60W
Dimensions: Height 164 mm / Width 48 mm
Material: ABS plastic
Color: Black
Mounting: Wall mounting / pole mounting / table mounting
Cable type: SR1-029-B
Cable length: 5 m
Connector: SMA connector (m)

The design of the bracket allows easy wall mounting with the supplied screws and plugs or pole mounting with a pipe clamp or cable ties (not included). The omnidirectional radiation pattern allows easy placement of the antenna in an elevated position. This antenna is an ideal solution for use in industrial and domestic environments with cellular modems/routers and machine-to-machine (M2M) applications for wireless connectivity.

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103263 - Antenna cable, SMA male / SMA female, 5 m, 2 pieces 56.41 EUR Antenna extension DUO LowLoss cable for LTE antennas SMA male to SMA female 2x 5 m

Connecting cable, SMA male to SMA female
inner core as well as outer braid made of copper / insulation
Aluminum foil + foam FOAM
Outer jacket PCV (suitable for outdoor use)
Impedance 50 Ohm +/- 2
Outer diameter 5,4 mm
Temperature range -40°C to +80°C
Weight approx. 48,4 kg/km
Capacitance 82 pF/m at 1 kHz

Attenuation values per 100 m

50 MHz 6.5 dB
100 MHz 9.3 dB
230 MHz 14.1 dB
300 MHz 16.3 dB
470 MHz 16.9 dB
600 MHz 18.2 dB
1000 MHz 30.9 dB
1350 MHz 35.9 dB
2150 MHz 46.9 dB

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103264 - Antenna cable, SMA male / SMA female, 10 m, 2 pieces 66.75 EUR Antenna extension DUO LowLoss cable for LTE antennas SMA male to SMA female 2x 10 m

Connecting cable, SMA male to SMA female
inner core as well as outer braid made of copper / insulation
Aluminum foil + foam FOAM
Outer jacket PCV (suitable for outdoor use)
Impedance 50 Ohm +/- 2
Outer diameter 5,4 mm
Temperature range -40°C to +80°C
Weight approx. 48,4 kg/km
Capacitance 82 pF/m at 1 kHz

Attenuation values per 100 m

50 MHz 6.5 dB
100 MHz 9.3 dB
230 MHz 14.1 dB
300 MHz 16.3 dB
470 MHz 16.9 dB
600 MHz 18.2 dB
1000 MHz 30.9 dB
1350 MHz 35.9 dB
2150 MHz 46.9 dB

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103072 - Antenna extension cable, FME male / female, 2 x 5 m 71.92 EUR Antenna extension cable DUO FME male to FME female 2x 5 m

Connection A: FME socket
Connection B: FME plug
Length (depth): 2x 5m
Suitable for: FME male / FME female
Cable: lowloss
Impedance: 50 Ohm

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103073 - Antenna extension cable, FME male / female, 2 x 10 m 71.92 EUR Antenna extension cable DUO FME male to FME female 2x 10 m

Connection A: FME socket
Connection B: FME plug
Length (depth): 2x 10 m
Suitable for: FME male / FME female
Cable: lowloss
Impedance: 50 Ohm

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103075 - Antenna extension cable, FME male / female, 5 m, LowLoss 30.57 EUR FME extension cable 5 m

Antenna cable
FME male to FME female
inner core as well as outer braid made of copper / insulation
Outer jacket PCV (suitable for outdoor use)
LowLoss
50 Ohm
for GSM and UMTS antennas
Outer diameter: 5,4 mm

Attenuation values per 100 m

50 MHz 6,5 dB
100 MHz 9,3 dB
230 MHz 14,1 dB
300 MHz 16.3 dB
470 MHz 16.9 dB
600 MHz 18.2 dB
1000 MHz 30.9 dB
1350 MHz 35.9 dB
2150 MHz 46.9 dB

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103076 - Antenna extension cable, FME male / female, 10 m, LowLoss 46.08 EUR FME extension cable 10 m

Antenna cable
FME male to FME female
inner core as well as outer braid made of copper / insulation
Outer jacket PCV (suitable for outdoor use)
LowLoss
50 Ohm
for GSM and UMTS antennas
Outer diameter: 5,4 mm

Attenuation values per 100 m

50 MHz 6,5 dB
100 MHz 9,3 dB
230 MHz 14,1 dB
300 MHz 16.3 dB
470 MHz 16.9 dB
600 MHz 18.2 dB
1000 MHz 30.9 dB
1350 MHz 35.9 dB
2150 MHz 46.9 dB

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103130 - Antenna adapter cable, TS9 male / SMA female, 10 cm 21.27 EUR Antenna adapter cable 10 cm, TS9 male to SMA female, gold plated

TS9 male to SMA female
Length: 10 cm

SEE OFFER SEE OFFER ebay

WITTENBERG WIT POLY-103367 - Antenna cable, RP-SMA male / RP-SMA female, 2 m 19.2 EUR Extension cable for WLAN antennas, SMA reversed female / male, gold plated, cable RG 174

RP-SMA female <> RP-SMA male
black

SEE OFFER SEE OFFER ebay

WITTENBERG WIT POLY-103363 - Antenna cable, FME female / FME female, 2 m 20.23 EUR FME connection cable

FME female <> FME female
black
Impedance: 50 Ohm

SEE OFFER SEE OFFER ebay

GEDORE WERKZEUG GEDO K 1900-018 - Screwdriver set 1/2'', 18 pieces 166.54 EUR Reversible for right and left hand operation In plastic case Dimensions: 200 x 120 x 38 mm Dimensions: 200 x 120 x 38 mm

SEE OFFER SEE OFFER ebay

HAZET HZ 986K-SR/5 - SmartRail 1/2' inner hexagon, 5-piece 116.4 EUR

Application:
Flexible plastic plug-in strip with ¹/₂'' square sockets

Magnetic underside ensures grip on all ferrous surfaces, e.g. on workshop carts, tool walls, machines, lifting platforms and in metal drawers
Easy to clean
Long-lasting, robust rotary lock for secure seating and immediate access
Secure fixed in locked state: To remove socket turning to the left
Robust metal eye for hanging, e.g. on a hook
5 slots
Drive: Square 12,5 mm (1/2 inches)
Output: Inner-hexagon Profile
Dimensions / Length: 245 mm x 37.4 mm
Number of tools: 5

SEE OFFER SEE OFFER ebay

C.K CK T4662 - Socket wrench set, multi, 1/2'', 24 pieces 121.06 EUR

Made of chrome vanadium for excellent durability
72-tooth reversible ratchet for fine adjustments in areas with limited space
Ball bearing locking system with push button release makes changing the socket wrenches quick and easy
Non-slip two-component handle provides additional comfort and ease of use
Twelve point versions are suitable for different fixings and bolts
Rust-proof, satin-matt chrome plating
The C.K Sure Drive system means that the torque is applied to the flat sides of the screw nut instead of to the corners,
which do not become rounded as a result
Durable box with custom-made inlay
Kit contents: socket wrench (twelve-point), sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30 and 32 mm, long socket wrenches 16 and 21 mm,
72-tooth reversible ratchet with 1/2'' drive, 125 mm and 250 mm extensions, 1/2'' universal joint, T-handle 1/2''Mx3/8''F

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103151 - Universal antenna 790 - 2690 MHz, SMA plug, 5 m, 2 pieces 123.6 EUR LAT 2000 Duo Set Universal antennas for all networks from 790 - 2690 MHz

The Wittenberg LAT 2000 universal antennas are suitable for all networks.
The frequency range is 790 - 2690 MHz, the impedance is 50 Ohm and the antenna gain is 8-9 dBi.
The antennas are mounted vertically, whether inside or outside does not matter, the LAT 2000 fulfills its purpose everywhere.

Gain 9 - 12 dBi
mast mounting included
SMA connector
5 m cable RG 58

The antenna can be connected to any LTE router with an appropriate antenna connector.
The 5 m cable, type RG 58, has an SMA plug/connector.
With a robust design, optimum performance and a long service life, the LAT 2000 antenna is convincing.
The set consists of two high-quality LAT 2000 universal antennas.

Notice:
The pictured mast mount is not part of the package contents and can be purchased optionally.

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-103499 - Signal distributor, SMA, 8-way 221.79 EUR Signal distributor 8-way SMA

A high-quality signal splitter designed to distribute a single antenna signal to eight outputs. It covers a frequency range from 700 to 2700 MHz and is therefore ideal for GSM, UMTS and LTE applications.

Frequency range: 700 - 2700 MHz
Impedance: 50 OHM
Connections: SMA socket (f)
Power handling: 20 watts

The connections consist of SMA sockets, which guarantee a reliable connection. With its compact size, the distributor can be easily integrated into various installations.
It is particularly useful when an antenna signal needs to be distributed to several devices without losing signal quality.

SEE OFFER SEE OFFER ebay

WITTENBERG WIT POLY-103492 - Signal distributor, SMA, 2-way 66.75 EUR Signal distributor 2-way SMA

A high-quality signal splitter developed to distribute a single antenna signal to two outputs. It covers a frequency range from 800 to 2700 MHz and is therefore ideal for GSM, UMTS and LTE applications.

Frequency range: 800 - 2700 MHz
Impedance: 50 OHM
Connections: SMA socket (f)
Power handling: 20 watts

The connections consist of SMA sockets, which guarantee a reliable connection. With its compact size, the distributor can be easily integrated into various installations.
It is particularly useful when an antenna signal needs to be distributed to several devices without losing signal quality.

SEE OFFER SEE OFFER ebay

NO NA-SAV2 RT - Noctua NA-SAV2, anti-vibration mount, red, 20 pieces 19.05 EUR The NA-SAV2 chromax.red set is a fan accessory kit consisting of 20 red NA-AV2 anti-vibration mounts for mounting up to five fans. The NA-AV2 mounts are used instead of standard fan screws and enable more convenient, faster mounting of fans into common mounting holes to decouple vibrations. At the same time, the chromax.red edition adds subtle red accents when used with Noctua's redux and industrialPPC fans.

Decoupled mounting for lower noise emission
Fans installed with commercially available screws can transfer vibrations to the PC housing, which can lead to disturbing resonances. Replacing standard fan screws with NA-AV2 mounts can drastically reduce these transmissions of structure-borne sound by effective decoupling.

Double-sided construction
Compared to conventional one-sided anti-vibration mounts, the NA-AV2 is much more practical to handle due to its double-sided construction - especially in confined environments or when the mounting holes of the fan are difficult to reach.

SEE OFFER SEE OFFER ebay

C.K CK T4422 SET - Screwdriver set, T-handle, hex, 5-piece 54.71 EUR VDE/EN 60900 tested - individually tested with 10,000 V for safe work up to 1000 V

Blade made of high-quality alloy S2 steel, hardened and tempered for exceptional strength and durability
Ergonomic two-component handle
Set contents: 1 screwdriver for each of the sizes 3/3.5/4/5 and 6 mm

SEE OFFER SEE OFFER ebay

C.K CK T0870 - Blade set for oscillating tool, 5-piece 35.38 EUR

For use with the following materials: thin steel, wood, wood with nails, plastics, non-ferrous metals
Set contents: 2 x carbon steel blades, 3 x HSS bimetal blades
Contents in detail: 2 x 34 mm x 40 wood HCS/1 x 34 mm x 40 BIM/1 x 80 mm dia. BIM/1 x 65 mm x 42 wood BIM M2 (Japanese teeth)
Can be used for the following machines: FEIN Multimaster, RIDGID Multi Tool, BOSCH Multi X, DREMEL Multi Max, SKIL Multi Tool, CRAFTSMAN Multi Tool, CHICAGO Multi Tool, MILWAUKEE Multi-Tool, BLACK&DECKER, MASTERCRAFT Multi Tool

SEE OFFER SEE OFFER ebay

C.K CK G7905 - Hose fitting, two-piece, male/female 24.63 EUR

Suitable for extending or shortening the hose (coupling to connect two hose parts together)
Solid brass - robust and corrosion resistant
Ball-bearing mounted interlock - secure and durable
Screw terminal for secure attachment to the hose
Only suitable for 1/2'' hose

SEE OFFER SEE OFFER ebay

BREVETTI STENDALTO AN325L060K - Connection elements 325L, 60 mm, 2 pieces 16.88 EUR The connecting elements are used to attach the two ends of the drag chain to the system.

SEE OFFER SEE OFFER ebay

DURABLE 487323 - Info frame, A3, self-adhesive, folding, silver, 2 pieces 39.87 EUR The self-adhesive info frame for A3 format information

Present information in a sophisticated and professional manner
Quickly insert and swap out documents thanks to the fold-back magnetic frame
Easy to mount on smooth, load-bearing surfaces without any tools - can be removed from glass, for example
Possible applications: for A3 documents, such as room signs, maps and offers etc.
Two inserts mean that it can be read from both sides when placed on glass surfaces
Identical frame appearance from both sides
Landscape or portrait layout
Extensive range of labelling templates is available at www.duraprint.de
External dimensions: 325 x 445 mm

SEE OFFER SEE OFFER ebay

DURABLE 487301 - Signage frame, A3, self-adhesive, folding, black, 2 pieces 39.87 EUR The self-adhesive signage frame for A3 format information

Present information in a sophisticated and professional manner
Quickly insert and swap out documents thanks to the fold-back magnetic frame
Easy to mount on smooth, load-bearing surfaces without any tools - can be removed from glass, for example
Possible applications: for A3 documents, such as room signs, maps and offers etc.
Two inserts mean that it can be read from both sides when placed on glass surfaces
Identical frame appearance from both sides
Landscape or portrait layout
Extensive range of labelling templates is available at www.duraprint.de
External dimensions: 325 x 445 mm

SEE OFFER SEE OFFER ebay

WITTENBERG WIT POLY-103359 - BNC antenna cable, black, 2 m 20.23 EUR BNC test lead black RG 58 C/U 50 Ohm

BNC plug <> BNC plug
Antenna cable
Impedance: 50 Ohm

SEE OFFER SEE OFFER ebay

EUFY T88523D2 - Surveillance camera, IP, WLAN, outdoor, 3 pieces 444.02 EUR eufyCam 2 Pro camera 3-set incl. HomeBase 2

Wireless surveillance camera
Security system 365 days battery power
HomeKit compatibility
2K resolution
IP67 water protection rating
Night vision
3-cam set

2K resolution
Smart image quality ensures every shot is recorded crystal clear.

365 days battery life
Your security camera will serve you for an entire year after just one recharge!

No Charges
eufyCam 2 Pro is a one-time purchase and requires no additional fees afterward.

Around the clock
Our advanced night vision technology with high light sensitivity combined with F2.0 lens aperture setting ensures that your home is monitored and absolutely protected during the day and especially at night.

Absolutely Weatherproof
Thanks to its IP67 waterproof rating, your eufyCam 2 Pro can withstand just about anything, summer heat, rain and even the German winter!

Normally sharp image
Smart AI technology automatically sharpens the image quality so you know exactly who is at the front door.

Smart person detection
eufyCam 2 Pro knows the difference between autumn leaves, neighbor's dog and mailman!

Everything under control
Effortlessly use your smartphone for clear footage whenever someone approaches your home.

Smart Activity Zone
Thanks to Activity Zone, you determine which filmed area is most important to you.

Who's there?
Thanks to two-way audio, from now on you can effortlessly communicate with wanted visitors or even give warnings to unwanted visitors!

Always connected
Your eufyCam can be connected to Amazon Alexa, Apple HomeKit or Google Assistant at any time, so you're always in control.

Absolutely secured
Our eufyCam 2 Pro is secured with state-of-the-art encryption and only you can access your data.

Strong network
Your HomeBase doubles as a WLAN repeater, giving your security cameras an extra boost.

Package Content:

eufyCam 2 Pro security camera set of 3
HomeBase 2
Mounts
Micro USB charging cable
Power adapter
Ethernet cable
User manual

SEE OFFER SEE OFFER ebay

CK T4508 - C.K Security Screwdriver Bit Set (25mm) 41 Piece Set 34.24 EUR

Premium quality S2 alloy steel for exceptional strength & durability
Precision machined tip for an exact fit & damage free screwing
25 mm bits

Contents:

Phillips: 1 x PH0 / 1 x PH1 / 3 x PH2 / 1 x PH1
Pozidriv: 1 x PZ0 / 1 x PZ 1 / 1 x PZ2 / 1 x PZ3
Slotted: 1 x 4,0 mm / 1 x 5,0 mm / 1 x 6,0 mm / 1 x 8,0 mm
Multitooth: 1 x size 4 / 1 x size 5 / 1 x size 6 / 1 x size 8
Spanner: 1 x size 4 / 1 x size 6 / 1 x size 8 / 1 x size 10
Torq-Set: 1 x size 6 / 1 x size 8 / 1 x size 10
Tamper-TX: 1 x TX8 / 1 x TX10 / 1 x TX15 / 1 x TX20 / 1 x TX25 / 1 x TX27 / 1 x TX30 / 1 x TX40
Tri-Wing: 1 x size 1 / 1 x size 2 / 1 x size 3 / 1 x size 4
1 x bit holder

SEE OFFER SEE OFFER ebay

NO NA-SAV2 SW - Noctua NA-SAV2, Anti vibration mounting, black, 20 pieces 19.05 EUR The NA-SAV2 chromax.black set is a fan accessory kit consisting of 20 black NA-AV2 anti-vibration mounts for mounting up to five fans. The NA-AV2 mounts are used instead of standard fan screws and enable a more comfortable, faster and vibration-independent mounting of fans in common mounting holes. At the same time, the chromax.black Edition is ideal for designing complete black systems with Noctuas industrialPPC fans.

Decoupled mounting for lower noise emission
Fans installed with commercially available screws can transfer vibrations to the PC housing, which can lead to disturbing resonances. The replacement of standard fan screws with NA-AV2 fixings can drastically reduce these body sound transmissions by effective decoupling.

Double-Sided Construction
Compared to conventional one-sided anti-vibration mounts, the NA-AV2 is much more practical in the handle due to its double-sided construction - especially in confined environments or when the mounting holes of the fan are difficult to reach.

Extra-soft and extremely tear-resistant
The use of high-quality premium silicone makes the NA-AV2 fasteners both highly flexible and extremely tear-resistant. This not only makes them practical in the handle, but also extremely robust and durable!

Compatible with all Noctua models and many other fans
The NA-AV2 are designed for use with fans that have standard 4.3mm mounting holes and open frame corners. They are compatible with all current Noctua models (incl. redux and industrialPPC) as well as many fans of other manufacturers.

Chromax black Edition
Maximum Color Selection! The accessories of the chromax line give Noctua users the opportunity to color-customize their fans and thus realize PC projects with a distinctive, focused esthetic. The red, blue, green, yellow, black and white versions allow fans to be adapted to all popular color schemes.

Package Contents
20x NA-AV2 Anti-vibration mounts

SEE OFFER SEE OFFER ebay

NO NA-SAV2 BL - Noctua NA-SAV2, Anti vibration mounting, blue, 20 pieces 19.05 EUR The NA-SAV2 chromax.blue set is a fan accessory kit consisting of 20 blue NA-AV2 anti-vibration mounts for mounting up to five fans. The NA-AV2 mounts are used instead of standard fan screws and enable a more comfortable, faster and vibration-independent mounting of fans in common mounting holes. At the same time, the chromax.blue edition sets subtle blue accents when used with Noctuas redux and industrialPPC fans, through which the fans can be adapted to individual color schemes.

Decoupled mounting for lower noise emission
Fans installed with commercially available screws can transfer vibrations to the PC housing, which can lead to disturbing resonances. The replacement of standard fan screws with NA-AV2 fixings can drastically reduce these body sound transmissions by effective decoupling.

Double-Sided Construction
Compared to conventional one-sided anti-vibration mounts, the NA-AV2 is much more practical in the handle due to its double-sided construction - especially in confined environments or when the mounting holes of the fan are difficult to reach.

Extra-soft and extremely tear-resistant
The use of high-quality premium silicone makes the NA-AV2 fasteners both highly flexible and extremely tear-resistant. This not only makes them practical in the handle, but also extremely robust and durable!

Compatible with all Noctua models and many other fans
The NA-AV2 are designed for use with fans that have standard 4.3mm mounting holes and open frame corners. They are compatible with all current Noctua models (incl. redux and industrialPPC) as well as many fans of other manufacturers.

Chromax.blue Edition
Maximum Color Selection! The accessories of the chromax line give Noctua users the opportunity to color-customize their fans and thus realize PC projects with a distinctive, focused esthetic. The red, blue, green, yellow, black and white versions allow fans to be adapted to all popular color schemes.

Package Contents
20x NA-AV2 Anti-vibration mounts

SEE OFFER SEE OFFER ebay

C.K CK T4360 - Screw and nut extractor set, 8 - 17 mm, 10 pieces 61.22 EUR

Provides a secure all-round grip and helps with nuts with up 85% damaged or worn corners
Suitable for a variety of fasteners, including hex, 12-point nuts and splined hubs
Socket wrench/ring spanner in just 2 sizes fits 10 different removal tool sizes (8 - 17 mm)
8 - 12 mm inserts are suitable for 14 mm spanners
12 - 17 mm inserts are suitable for 19 mm spanners
Unique flange shape prevents falling out
Adapter for extracting screws/nuts in sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 mm

SEE OFFER SEE OFFER ebay

RED Digital Cinema Used RED DSMC2 Helium 8K S35 1628.95 EUR The RED DSMC2 Helium 8K S35 features cable-free peripherals, integrated mounting plate, wireless control, and compatibility with a growing number of DSMC2 modules and accessories. The DSMC2 HELIUM also supports interchangeable OLPFs and lens mounts - empowering you to make the most of all of your S35 compatible PL, Nikon, Canon, and Leica lenses. This item is sold as seen for spares or repair. Please read the description in full before purchasing. Spares and repair items do not come with a warranty but do represent potentially excellent value. All faults or issues are fully described. Cosmetically this item would be placed within our Good condition rating. Please Note: This item is fully functional. This item contains big debris in the internal parts of the sensor, this camera also suffers from a sensor problem, which, specially with high ISO, top to button moderately visible lines appear all over the image.

SEE OFFER SEE OFFER ebay

NO NA-SAV2 GE - Noctua NA-SAV2, anti-vibration mounting, yellow, 20 pieces 19.05 EUR The NA-SAV2 chromax.yellow set is a fan accessory kit consisting of 20 yellow NA-AV2 anti-vibration mounts for mounting up to five fans. The NA-AV2 mounts are used instead of standard fan screws and enable more convenient, faster mounting of fans into common mounting holes to decouple vibrations. At the same time, the chromax.yellow edition adds subtle yellow accents when used with Noctua's redux and industrialPPC fans, through which the fans can be adapted to individual colour schemes.

Decoupled mounting for lower noise emission
Fans installed with commercially available screws can transfer vibrations to the PC housing, which can lead to disturbing resonances. Replacing standard fan screws with NA-AV2 mounts can drastically reduce these transmissions of structure-borne sound by effective decoupling.

SEE OFFER SEE OFFER ebay

V-TAC VT-871 - LED floodlight GU10, 2 W, 180 lm, 6400 K, 38° 12.53 EUR The compact lamps with a GU10 base are used in lights in which the lamp is one of the essential design features due to its clear visibility. Due to the 230 V mains voltage, a transformer is not required. This makes converting halogen to energy-saving LED technology particularly easy. The GU10 bayonet mount makes these lamps less susceptible to interference compared to conventional screw or pin sockets.

LED lamp with a GU10 socket
As a replacement for conventional 20-watt lamps

SEE OFFER SEE OFFER ebay

WITTENBERG WIT K-102707 - Pole mount, 2 pieces

Comparison of Similar Products