WELLER WR 2000D - WELLER WR 2000D, with desoldering iron
1514.21 EUR
Explore the detailed sheet rich in complete information, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
The WR2 by Weller is a multi-purpose repair station for professional repair work on the latest electronic assemblies in industrial manufacturing technology, both in the repair and laboratory sector.
The WR 2 station has two independent, tool-specific channels for automatic tool detection and activation of the corresponding control parameters. This means that simultaneous soldering and desoldering or soldering and working with hot air is possible.
All Weller soldering tools such as soldering irons, soldering baths, desoldering irons or hot air irons can be connected. The Weller micro-tools cannot be operated on this station.
The WR 2 supply unit
• 2 independent channels with automatic tool detection
• Simultaneous operation of 2 soldering tools
All soldering tools, such as soldering irons, soldering baths up to 200 W, desoldering irons up to 80 W or hot air pistons up to 100 W can be connected.*
• Built-in rotary valve pump
• Vacuum and air-flow generation
• ECO button
• Freely programmable Funktions-Taste
• ESD safe
WR 2 Technical data:
• Dimensions (L x W x H): 273 x 235 x 102 mm
• Mains voltage: 230 V, 50 Hz
• Protection class: I & III
• Pump (interruption 30/30 s): max. negative pressure 0.7 bar
• Max. output 18 l/min
• Hot air max. 10 min.
• Temperature control: 50 °C – 550 °C
• WP 80/WP 120 soldering irons: 50 °C – 450 °C
• WP 200 soldering iron: 50 °C – 550 °C
• WSP 150 soldering iron: 50 °C – 550 °C
• DSX 80/DXV 80 desoldering irons: 50 °C – 450 °C
• HAP 1 hot air piston: 50°C - 550°C
WR 2000D with desoldering iron DSX 80
consisting of:
T005 33 776 99
WR 2 repair station, 300 W
T005 13 190 99
DSX 80 desoldering iron 80 W/24 V with desoldering nozzle DX 113HM
T005 15 152 99
WDH 30 safety rest
* Weller micro-tools cannot be operated on the WR 2.
Important: The figure does not represent what is included with delivery!
EAN: 4003019422357
Delivery Cost: 14.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
The WR2 by Weller is a multi-purpose repair station for professional repair work on the latest electronic assemblies in industrial manufacturing technology, both in the repair and laboratory sector.
The WR 2 station has two independent, tool-specific channels for automatic tool detection and activation of the corresponding control parameters. This means that simultaneous soldering and desoldering or soldering and working with hot air is possible.
All Weller soldering tools such as soldering irons, soldering baths, desoldering irons or hot air irons can be connected. The Weller micro-tools cannot be operated on this station.
The WR 2 supply unit
• 2 independent channels with automatic tool detection
• Simultaneous operation of 2 soldering tools
All soldering tools, such as soldering irons, soldering baths up to 200 W, desoldering irons up to 80 W or hot air pistons up to 100 W can be connected.*
• Built-in rotary valve pump
• Vacuum and air-flow generation
• ECO button
• Freely programmable Funktions-Taste
• ESD safe
WR 2 Technical data:
• Dimensions (L x W x H): 273 x 235 x 102 mm
• Mains voltage: 230 V, 50 Hz
• Protection class: I & III
• Pump (interruption 30/30 s): max. negative pressure 0.7 bar
• Max. output 18 l/min
• Hot air max. 10 min.
• Temperature control: 50 °C – 550 °C
• WP 80/WP 120 soldering irons: 50 °C – 450 °C
• WP 200 soldering iron: 50 °C – 550 °C
• WSP 150 soldering iron: 50 °C – 550 °C
• DSX 80/DXV 80 desoldering irons: 50 °C – 450 °C
• HAP 1 hot air piston: 50°C - 550°C
WR 2000D with desoldering iron DSX 80
consisting of:
T005 33 776 99
WR 2 repair station, 300 W
T005 13 190 99
DSX 80 desoldering iron 80 W/24 V with desoldering nozzle DX 113HM
T005 15 152 99
WDH 30 safety rest
* Weller micro-tools cannot be operated on the WR 2.
Important: The figure does not represent what is included with delivery!
EAN: 4003019422357
Delivery Cost: 14.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
WELLER DS-7 - Desoldering accessory for TCP-S/24/12 soldering iron
100.9 EUR
Desoldering accessory for TCP-S/24/12 soldering iron.
WELLER DIL-E-24 - Desoldering tip for soldering iron LR-21
88.49 EUR
Desoldering tip for soldering iron LR-21.
WELLER WR 2000A - WELLER WR 2000A with hot air piston
1509.21 EUR
The WR2 by Weller is a multi-purpose repair station for professional repair work on the latest electronic assemblies in industrial manufacturing technology, both in the repair and laboratory sector.The WR 2 station has two independent, tool-specific channels for automatic tool detection and activation of the corresponding control parameters. This means that simultaneous soldering and desoldering or soldering and working with hot air is possible.
All Weller soldering tools such as soldering irons, soldering baths, desoldering irons or hot air irons can be connected. The Weller micro-tools cannot be operated on this station.
The WR 2 supply unit
• 2 independent channels with automatic tool detection
• Simultaneous operation of 2 soldering tools
All soldering tools, such as soldering irons, soldering baths up to 200 W, desoldering irons up to 80 W or hot air pistons up to 100 W can be connected.*
• Built-in rotary valve pump
• Vacuum and air-flow generation
• ECO button
• Freely programmable Funktions-Taste
• ESD safe
WR 2 Technical data:
• Dimensions (L x W x H): 273 x 235 x 102 mm
• Mains voltage: 230 V, 50 Hz
• Protection class: I & III
• Pump (interruption 30/30 s): max. negative pressure 0.7 bar
• Max. output 18 l/min
• Hot air max. 10 min.
• Temperature control: 50 °C – 550 °C
• WP 80/WP 120 soldering irons: 50 °C – 450 °C
• WP 200 soldering iron: 50 °C – 550 °C
• WSP 150 soldering iron: 50 °C – 550 °C
• DSX 80/DXV 80 desoldering irons: 50 °C – 450 °C
• HAP 1 hot air piston: 50°C - 550°C
WR 2000A with HAP1 hot air piston
consisting of:
T005 33 776 99 WR 2 repair station, 300 W
T005 27 115 99 HAP 1 hot air iron 100 W/24 V with
Hot air nozzle R 06 round ø 3.0 mm
T005 15 152 99 WDH 30 safety rest
* Weller micro-tools cannot be operated on the WR 2.
LR 21 - WELLER soldering iron for WS 51/WECP
189.79 EUR
Replacement standard soldering iron LR 21 for WS 50 (WECP) soldering station can be universally used in the electronics sector with a power output of 50 W and a very broad spectrum of soldering tips (ET series). An integrated platinum temperature sensor and a particularly powerful 24-V heating element enables excellent dynamic temperature behaviour.Includes LT-M soldering tip (chisel tip 3.2 mm)
To avoid differences in potential in the work area, it is possible to use the integrated potential equalisation cable (pin 5). Thus, a desired potential equalisation for the soldering tip can be produced via the used supply unit.
Replacement tips: see ''SPITZE LT...''
Heating element: see ''52411099''
When using the tips in the PT... TIP range, the WELLER SLEEVE product is also required.
WELLER WXP200 - WXP 200 soldering iron
339.26 EUR
WXP 200 soldering ironThe WXP 200 soldering iron distinguishes itself by reaching the soldering tip temperature quickly and precisely. Due to its extremely high-performance 200-W heating element, excellent, dynamic behaviour is achieved. Due to its additional optimised sensor position, this soldering iron is particularly suited for soldering work with increased heat supply
range.
The WXP 200 is equipped with a use-detection system and can automatically be switched to standby operation or OFF when it is not being used. The respective operating status is indicated by the LED status display. Please refer to the operating instructions of the respective WX supply unit being used to set the standby temperature and the switching times.
Technical data:
Temperature range: 100°C - 450°C (212°F - 850°F)
Tool cable: Silicone rubber, heat resistant
Heating element: Integrated heating wire element
Temperature sensor: Platinum sensor
Heating output: 200 W
Voltage (heating): 24 V
Heating time: (approx.) 19 s (50°C to 380°C) (120°F to 660°F)
Connection: 6-pin piece, protected against reverse polarity with interlock
Weight: 94 g including tip without cable
Tip type: XHT series
Power unit: Weller WX stations
WELLER W 61C - Magnastat mains voltage soldering iron, 60 watt
132.33 EUR
60-W Magnastat mains voltage soldering iron with non-twist guard.The Magnastat system works by means of a permanent magnet and a ferro-magnetic temperature sensor. If the soldering tip is cold, the permanent magnet is pulled by the ferro-magnetic temperature sensor. When this happens, the switch is closed and the heating is switched on. When the temperature sensor approaches its Curie point, i.e. the selected tip temperature, its magnetic behaviour changes and the heating is switched off. If the tip cools slightly, the temperature sensor pulls again and the control circuit starts afresh. The working temperature is chosen by simply changing the soldering tip with the one attached to its temperature sensor. The Weller longlife soldering tips cover the temperature ranges 260°C, 310°C, 370°C, 425°C and 480°C.
The soldering iron is supplied with the following tip: CT5C7.
Replacement tips for 370°C can be found under ''TOP CT5...''.
WELLER WXP120SET - WXP 120 set soldering iron with rest
302.41 EUR
WXP 120 set WDH 10 soldering iron setThe WXP 120 soldering iron distinguishes itself by reaching the soldering tip temperature quickly and precisely. Due to its particularly high-performance 120-W heating element,
excellent dynamic behaviour is achieved. Together with the slim design and the short distance from the handle to the soldering tip, this soldering iron can be used universally from extremely fine
soldering work to work with an increased heat requirement.
The WXP 120 is equipped with a use-detection system and can automatically be switched to standby operation or off when it is not being used. The respective operating status is indicated by the LED status display. Please refer to the operating instructions of the respective WX supply unit being used to set the standby temperature and the switching times.
Technical data:
Temperature range: 100°C - 450°C (212°F - 850°F)
Tool cable: Silicone rubber, heat resistant
Heating element: Integrated heating wire element
Temperature sensor: Platinum sensor
Heating output: 120 W
Voltage (heating): 24 V
Heating time: (approx.) 14 s (50°C to 380°C) (120°F to 660°F)
Connection: 6-pin piece, protected against reverse polarity with interlock
Weight: 42 g including tip without cable
Tip type: XT series
Power unit: Weller WX stations
Note: The WXP 120 soldering iron may only be operated with the Weller WX supply units.
WELLER WLBRK12EU - 12-W cordless soldering iron with Li-ion battery
84.98 EUR
12-W cordless soldering ironSolder on the go with Weller's cordless rechargeable soldering iron. The 12-W lithium-ion battery enables you to use the soldering iron while recharging for continuous operation. With its 45-second heat-up, full range of tips, LED light, auto shut off and integrated safety rest, it's perfect for your soldering tasks.
- Solder on the go - solder anywhere, at any time, with cordless operation
- Use while recharging - recharging on the go is quick and easy with the USB charging port
- 45-second heat-up
- Improved visibility - the bright LED light provides a better view in dimly lit environments
- No-tool tip change - save time and effort by swapping tips without the need of a tool
- Protect yourself and your workspace - iron automatically shuts off into a ''locked'' position when the cap is closed
WELLER WXP200SET - WXP 200 set soldering iron with rest KL!
331.39 EUR
WXP 200 set soldering set with rest WDH 31The WXP 200 soldering iron distinguishes itself by reaching the soldering tip temperature quickly and precisely. Due to its extremely high-performance 200-W heating element, excellent, dynamic behaviour is achieved. Due to its additional optimised sensor position, this soldering iron is particularly suited for soldering work with increased heat supply
range.
The WXP 200 is equipped with a use-detection system and can automatically be switched to standby operation or OFF when it is not being used. The respective operating status is indicated by the LED status display. Please refer to the operating instructions of the respective WX supply unit being used to set the standby temperature and the switching times.
Technical data:
Temperature range: 100°C - 450°C (212°F - 850°F)
Tool cable: Silicone rubber, heat resistant
Heating element: Integrated heating wire element
Temperature sensor: Platinum sensor
Heating output: 200 W
Voltage (heating): 24 V
Heating time: (approx.) 19 s (50°C to 380°C) (120°F to 660°F)
Connection: 6-pin piece, protected against reverse polarity with interlock
Weight: 94 g including tip without cable
Tip type: XHT series
Power unit: Weller WX stations
WELLER WMRP KOL - WMRP soldering iron, without soldering tip, without holder
218.02 EUR
WMRP micro soldering iron, 40 W, 12 V (handle without soldering tip) with Active Tip heating technology.
WELLER 52411099 - Replacement heating element for LR-21 soldering irons
55.42 EUR
Replacement heating element for LR-21 soldering irons(Weller WS 51).
WELLER WXP65 - WXP 65 Irons Set
303.7 EUR
WXP 65 IronsWXP 65 (65 W, 24 V) with the new intelligent WXP soldering tool 65 with an optimal performance with only 65 watts maximum power. It is therefore appropriate tool for fine soldering DAS with increased heating demand. The soldering iron WXP 65 is perfect to keep the solder costs as low as possible. Because the new XNT soldering tips with ''Fast Response'' Technology is available at a fair price.
Intelligent soldering
Parameter memory in the butt - storage of essential data on the piston. No calibration of station required.
Slim, ergonomic soldering
This soldering iron is very good in the hand and is easy to use.
XNT ''Fast Response'' tips
The new series provides tips for optimal performance. And the best part: Due to the fair Lötspitzenpreise the costs are kept as low as possible.
- Improved heat transfer
- Tip Sensor with optimized position
- Faster response time
Current status easy to read
The ring of light shows at first glance the status of the piston is located.
Solid blue: the piston has reached operating temperature
Flashing: Heats at the moment on
No light: bulb is made of
WELLER PP JR - Gas Soldering Iron, Pyropen Jr.
136.04 EUR
Pyropen Junior, butane gas powered mini-soldering ironIgnition with lighter
• One filling is sufficient for ~ 1 hour/filling quantity 6 ml
• Soldering temperature range: ~ 400°C - 500°C
• Hot air temperature range: ~ 650°C
Comparison to electrical output corresponds to 20 - 60 watts
• Empty weight 53 g
The butane gas powered Pyropen offers a soldering iron, hot air nozzle and flame nozzle in one. They have a very short heating time and can be refilled easily and quickly. The filling status can be checked at any time via a viewing glass.
The temperature setting is controlled via a quantity of the gas flow. All Pyropens require very clean butane gas for optimal temperature regulation.
Delivery includes TIP 71-01-01
WELLER WE T0058770715 - WEP70 soldering irons for WE1010
97.8 EUR
Soldering irons, 70 W with tool-free tip change, ergonomic handle and heat-resistant silicone cable
WELLER DS-7 EC - Desoldering accessory for LR-21 soldering iron
95.73 EUR
Desoldering accessory for LR-21 soldering iron.
WELLER PIEZO - Gas soldering iron, Pyropen Piezo
216.66 EUR
Pyropen-Piezo with integrated ignition device. The Pyropen has the typical Weller characteristics: Temperature control, 200° - approx. 500 °C through regulation of the gas valve, short heating time, ready to solder in 30 sec. The temperature control and its electrical neutrality make the Weller Pyropen a soldering device that can also be used on highly sensitive electronics. Accessories: Pyropen with standard longlife soldering tip 3.3 mm, hot air nozzle 4.9 mm, flame-shaped nozzle, clamp bolt, soldering iron rest clip, cleaning sponge and user guide.
WELLER WSTA3 - Gas soldering iron, WSTA3 Pyropen
234.66 EUR
Butane gas powered Profi-Line soldering ironThe Weller Cordless Pyropen is a manually ignited, butane gas-powered soldering iron with soldering, hot air and soldering torch functions. It is ideal for soldering on the go and helps to carry out soldering work anywhere without the need for a mains connection or an annoying cable. The butane gas soldering iron has a fast heat-up time and an operating time of approx. 3 hours with one charge. It offers infinitely variable temperature adjustment from 200°C to 500°C when used as a soldering iron and up to 700°C when used as a hot air gun and 1300°C when used as a soldering torch.
- Ready to use in seconds - fast heat-up time, no long waiting for the soldering iron to heat up
- Extra long operating time - butane gas soldering iron works for approx. 3 hours with one filling of Weller butane gas
- High flexibility thanks to included accessories - additional hot air and torch function for shrinking tubes and soldering
- Temperature adjustable from 200° to 1300°C - variably adjustable temperatures between 200° and 500°C when used as a soldering iron, 700°C when used as a hot air device and max. 1300°C as a soldering lamp
- Easy refilling with Weller butane gas - no need for cables, batteries or cartridges, easy refilling with Weller butane gas (Weller® Cat. No. WB1 or WB2) in just a few seconds for a virtually uninterrupted workflow
Technical data:
Comparison with electrical power 20 - 80 W
Quantity per package 30
Temperature range (depending on tool) 200 - 500°C
Temperature range °C 200 - 500 °C
Temperature range °F 392 - 1992 °F
Tip family 70-X-Series
Tip type 70-X-Series
UPC 037103472281
WELLER WE T0052924199 - Micro soldering iron WTMP MS kit, 40 W, 12 V
298.32 EUR
WTMP MS micro soldering iron, 40 W, 12 VRTM 013 S MS micro soldering tip
WSR 205 safety rest with stop & go function
Compact. Powerful. Versatile. Increase your productivity
- Micro soldering iron
- Set with tip and safety shelf
- RTM tips family
- Military standard
- For very small components with high energy requirements
- For minute work under the microscope
- RT soldering tips are quick and easy to replace
- Active tip (cartridge) system allows the soldering tip to be changed regardless of soldering iron temperature
- Extremely short heating time: 5 s.
- Standby function
Fine, slim soldering iron kit
WELLER WE T0151618199 - Gas soldering iron, WSTA2 Pyropen Junior
136.77 EUR
Butane gas operated mini soldering ironThe Weller Pyropen Junior is a hand-ignited, lightweight butane gas soldering iron with soldering, hot air and soldering torch functions. It is ready for use within 30 seconds and helps to complete soldering tasks anywhere without the need for a mains connection or an annoying cable. The scope of delivery includes an aluminum protective cap with pocket clip and safety function, which prevents the cap from being put on when the soldering iron is switched on. The temperature can be adjusted between 250°C and 450°C when used as a soldering iron and up to 430°C when used as a hot air gun.
Manual ignition:
- Can be easily ignited by hand with a lighter or match
Fast heat-up time:
- Ready for use in 30 seconds thanks to the fast heat-up time
Soldering on the move, even outdoors:
- Complete your soldering tasks anywhere without a mains connection or an annoying cable in the way
Versatile functionality for different applications:
- Additional hot air function for shrinking tubes
Temperature adjustable from 250° to 450°C:
- Variable adjustment of the soldering temperature between 250° and 450°C when used as a soldering iron, 430°C when used as a hot air blower
Easy refilling with Weller butane gas:
- No need for cables, batteries or cartridges, simply refill with Weller butane gas (Weller® Cat. No. WB1 or WB2) in just a few seconds for a virtually uninterrupted workflow
Aluminum protective cap:
- Increased safety thanks to an aluminum protective cap that prevents the cap from being put on when the soldering iron is switched on
WELLER 51314799 - DX 117 desoldering tip
23.34 EUR
Type DX seriesDim. A 2.90 mm
Dim. B 1.50 mm
Dim. C 23 mm
XYTRONIC ERSATZ XY 76-141 - Replacement cotton insert desoldering iron DIA60A
12.01 EUR
Replacement cotton insert for desoldering iron DIA60A.
WELLER WE T0052923999 - Micro soldering iron WTMP MS, 40 W, 12 V
216.66 EUR
Micro-soldering iron WXMP MS 40 W, 12 V (handle without soldering tip) with active heating technologyFine, slim soldering iron handle
RTM tip with active heating technology for fine micro soldering. Order separately.
Active cutting-edge technology
The RTM tips combine functions such as a built-in sensor and perfect heat transfer for the fastest heating and recovery times.
Reduced downtime
For faster and more efficient workflow and better results.
Patented tip and handle design
Quick and trouble-free tip changes without the need for additional tools.
Precise control, ergonomic handle
The design of the boomerang handle allows precise handling while providing an ergonomic and secure grip.
WELLER WXR 3030 - Rework - Soldering, Desoldering and Hot Air
3465.14 EUR
Power unit, 420 W, 3 channels with WXHAP 200 Hot air iron, WXDP 120 Desoldering iron and WXP 65 Soldering ironDimensions W x D x H (mm) 273 x 235 x 102
Voltage 230 V (50/60 Hz)
Max Vakuum 0,7 bar
Capacity l/min 18
Heating output 420 W (600 W)
Dimensions W x D x H (Inch) 10,75 x 9,25 x 4,02
Weight (ca) in kg 6.7
Built in pump Periodic duty 30/30 s
Temperature stability °C ±2
Temperature stability °F ±4
Temperature range (depends on tool) °C 100 - 450 (550)
Temperature range (depends on tool) °F 200 - 850 (999)
Display 255 x 128 dots / Backlighting
Fuse overcurrent release 2,0 A
Temperature accuracy °F ±17
Channels 3
USB interface of firmware updates, parameterization and monitoring USB interface supports all standard USB flash drive types
IPC Conforming ja
WELLER TCP-S - Magnastat soldering iron for WTCP
140.13 EUR
Replacement Magnastat soldering iron for WTCP 50/51. PTB7 tip included.The Magnastat system works by means of a permanent magnet and a ferro-magnetic temperature sensor. If the soldering tip is cold, the permanent magnet is tightened by the ferro-magnetic temperature sensor. In this state, the switch is closed and the heating is switched on. When the temperature sensor is approaching its Curie point, i.e. the selected tip temperature, its magnetic behaviour changes and the heating is switched off. If the tip cools slightly, the temperature sensor pulls again and the control circuit starts again. The choice of working temperature is achieved simply by changing the soldering tip with the temperature sensor attached to it. The Weller Longlife soldering tips include temperature ranges 260°C, 310°C, 370°C, 425°C and 480°C. The WTCP 51 is not suitable for ESD safe applications as the soldering iron is not anti-static.
• Replacement tips for 370°C see TIP PT...
• Heating element: 51011299
• Magnet switch: 51020199
When using the tips in the TIP PT series, the WELLER SLEEVE product is also required.
WELLER SPITZE XDSL 3 - Desoldering tip XDS 3, 2.3 mm, round, straight
32.17 EUR
Suction nozzle for WXDP (1 piece) inner Ø 1.0 mm outer Ø 2.3 mm nozzle length 10.5 mmWeller suction nozzles are designed to remove solder from all types of solder joints. They are heated and melt the solder. When the vacuum on the desoldering iron is switched on, the liquid solder is extracted via the tube in the nozzle into the solder collector.
WELLER 51314200 - DX 112 desoldering tip
23.38 EUR
Desoldering tip for DSX 80 and DXV 80Style type DX series
Dim. A 2.30 mm
Dim. B 1 mm
Dim. C 8.25 mm
WELLER SPITZE XDSL 2 - Desoldering tip XDS 2, 5.3 mm, round, straight
32.17 EUR
Suction nozzle for WXDP (1 piece) inner Ø 3.0 mm outer Ø 5.3 mm nozzle length 10.5 mmWeller suction nozzles are designed to remove solder from all types of solder joints. They are heated and melt the solder. When the vacuum on the desoldering iron is switched on, the liquid solder is extracted via the tube in the nozzle into the solder collector.
WELLER WDD 81V - WELLER WDD 81V desoldering station in the set
1044.39 EUR
Digital desoldering station 95 W, 230 V, for operation with external compressed air• 1-channel
• Digital control electronics
• Desoldering or soldering up to 80 W
• Compressed air converter generates the vacuum for desoldering
• Temperature range: 50°C–450°C
• Protection class 1
• Antistatic housing
• Equipotential bonding (hard earthed when supplied to the customer)
• Automatic tool detection
• Dimensions: 166 x 115 x 101 mm (L x B x H)
Primary pressure 500–600 KPA (58–87 psi) oil-free, dry compressed air
For operation with external compressed air
WELLER WE T0052924299 - Nano/pico soldering iron WTPP MS kit, 40 W, 12 V
278.68 EUR
WTPP MS nano/pico soldering iron, 40 W, 12 VRTP 004 S MS nano/pico soldering tip
WSR 205 safety rest with stop & go function
Compact. Powerful. Versatile. Increase your productivity
- Nano/pico soldering irons
- Set with tip and safety shelf
- RTP tips family
- Military standard
- For very small components with high energy requirements
- For minute work under the microscope
- RT soldering tips are quick and easy to replace
- Active tip (cartridge) system allows the soldering tip to be changed regardless of soldering iron temperature
- Extremely short heating time: 3 s.
- Standby function
KH 04 - Weller soldering iron holder
50.25 EUR
Soldering iron holder with sponge.Only for straight tips.
WELLER WXP120 - WXP 120 Iron
268.56 EUR
WXP 120 IronsThe WXP 120 soldering iron is characterized by a fast and accurate reaching the Löötspitzentemperatur. Due to its extremely powerful 120W heater a
excellent dynamic performance achieved. Together with its slim design and the short distance from the handle to the tip of the soldering iron is universal use of extremely fine
Soldering, to those with higher temperature requirements.
The WXP 120 is equipped with a useful detection and can automatically be switched into standby mode and off when not in use. Due to the LED status display of each mode is displayed. Adjusting the temperature and the standby switch times, please refer to the instructions of the used WX care unit.
Specifications:
Temperature range: 100 ° C - 450 ° C (212 ° F - 850 ° F)
Tool Cable: silicone rubber, heat resistant
Heating element: wire element Built
Temperature sensor: platinum sensor
Heating power: 120W
Power (heating): 24 V
Warm up time: (approx) 14s (50 ° C to 380 ° C) (120 ° F to 660 ° F)
Connection: 6 pole with polarity reversal latch St.
Weight: 42 g including tip without cable
Tip Type: XT-series
Care unit: Weller WX stations
Note: The WXP 120 of Weller soldering iron should be used with the Weller WX supply units only.
XYTRONIC KOLBEN 106V - Replacement soldering iron for soldering/desoldering station LF3
33.71 EUR
ESD-design replacement soldering iron for station LF-369D.
45 W
WELLER SPITZE XDSL 8 - Desoldering tip XDSL 8, 2.9 mm, round, straight
32.17 EUR
Suction nozzle for WXDP (1 piece) inner Ø 1.5 mm outer Ø 2.9 mm nozzle length 10.5 mmWeller suction nozzles are designed to remove solder from all types of solder joints. They are heated and melt the solder. When the vacuum on the desoldering iron is switched on, the liquid solder is extracted via the tube in the nozzle into the solder collector.
WELLER WT2010 - 2-Channel Soldering Station digital 150 W, with soldering iron
780.3 EUR
2-Channel Soldering Station digital 150 WPower unit, 2 channel with soldering iron WTP 90 and safety rest WSR 200
WTP 90: The soldering iron for universal use with power response tips. Tip family XNT & THM (high mass tips)
Intuitive use thanks to clear menu structure
Reduced footprint thanks to stackability
Automatic standby of tool thanks to integrated acceleration sensor in the tool
Housing cover useable as storage
OFF time, Prozess window, Lock function, Offset
WELLER WE T0052923399 - Soldering iron, WXUP MS set
307.62 EUR
WXUP MS soldering iron set for high-performance soldering applications and very large components- Triple award-winning active soldering tips
- Excellent heat transfer
- Excellent response time
- RT soldering tips can be changed quickly and easily
- For high-performance soldering applications and very large components. Component size: XL to XXL
- Especially for MIL-SPEC/IPC requirements
- The tip can be replaced quickly and easily
- Extremely short heating time: 7 sec.
WELLER SA21A - WELLER manual desoldering pump, anti-static, 200 mm
43.85 EUR
In manual pumps a vacuum is generated by means of the iron, cylinder and spring force. The piston is cocked manually and automatically secured. By pressing the release button, the piston is abruptly run back and a short-term vacuum is created so that the solder joint is freed of liquid solder.• Length: 200 mm
• Metal housing
• Antistatic
WELLER SPITZE XDSL 1 - Desoldering tip XDSL 1, 2.5 mm, round, straight
32.17 EUR
Suction nozzle for WXDP (1 piece) inner Ø 1.4 mm outer Ø 2.5 mm nozzle length 10.5 mmWeller suction nozzles are designed to remove solder from all types of solder joints. They are heated and melt the solder. When the vacuum on the desoldering iron is switched on, the liquid solder is extracted via the tube in the nozzle into the solder collector.