Used Lowepro Urban Photo Sling 150
32.95 EUR
Explore the detailed sheet rich in complete information, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
The black Urban Photo Sling 150 from Lowepro is the smaller brother of the Urban Photo Sling 250 version but remains an all-around carry-all that gives you the option of toting it in any of three positions. Its shoulder strap allows you to wear it over your shoulder or swung in front of you on your chest. Or, keep it at your side as you would a traditional shoulder bag. The tuck-away waist belt provides additional balance and support while you're walking or hiking. For gear, it will accommodate your DSLR with a 55-200mm attached as well as two additional small lenses or, if preferred, a flash and one extra lens. There's also room for your 10" tablet, held in a separate padded compartment, for when you're sitting at lunch and want to access files, jot down a few notes or send an email. The exterior is a combination of polyester and nylon while the interior is 100% polyester
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-6 days
Condition: used
The black Urban Photo Sling 150 from Lowepro is the smaller brother of the Urban Photo Sling 250 version but remains an all-around carry-all that gives you the option of toting it in any of three positions. Its shoulder strap allows you to wear it over your shoulder or swung in front of you on your chest. Or, keep it at your side as you would a traditional shoulder bag. The tuck-away waist belt provides additional balance and support while you're walking or hiking. For gear, it will accommodate your DSLR with a 55-200mm attached as well as two additional small lenses or, if preferred, a flash and one extra lens. There's also room for your 10" tablet, held in a separate padded compartment, for when you're sitting at lunch and want to access files, jot down a few notes or send an email. The exterior is a combination of polyester and nylon while the interior is 100% polyester
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-6 days
Condition: used
Comparison of Similar Products


MediaRange photo paper is ideal for professionally printing your photos, brochures or other documents. The special coating allows for vibrant prints with all standard inkjet printer models.
APPLICATIONS
Perfect for printing photos, brochures, etc.
FEATURES
- Color: white
- Coating: glossy
- Size: 4'' x 6'' (100 x 150mm)
- Weight: 220g
- Packaging: 50 sheets
- Fast-drying
- Long-lasting color conservation
- Suitable for use with all standard inkjet printers

The Kodak Stick Ups photo paper is an innovative product that allows you to print your favourite photos and easily stick them to any surface. This high-quality, re-adhesive photo paper delivers vibrant, bright colours and exceptional image sharpness. It is compatible with all inkjet printers, meaning that you can easily print photos at home.
Glue, peel off and re-stick wherever you want!
The unique and repositionable adhesive technology of Kodak Stick Ups photo paper lets you play around where you stick your photos, without leaving any trace. Swap photos around without damaging your walls or furniture! The textured surface also offers excellent resistance to tearing and kinks. It is ideal for decorating your home, creating photo albums and personal greeting cards, or just printing and sharing memories with your loved ones.

The Kodak Photo Sticker Paper is a self-adhesive photo paper that you can use to create high-quality prints that you can easily customise and stick in place as you like. Ideal for fans of scrapbooking and for creatives. Give your everyday objects a personal touch with personalised images and designs. This paper is perfect for your creative projects thanks to its glossy finish.
The self-adhesive photo for unique memories
The Kodak Photo Sticker Paper is compatible with all inkjet printers and can be used to create customised stickers for photo albums, notebooks, laptops, mobile phones and much more. It's easy to use: Print your image on photo paper, cut it to the required size, peel off the protective film and stick the sticker to the surface of your choice. Give your items a personal touch and add some style to your everyday life!

MediaRange photo paper is ideal for professionally printing your photos, brochures or other documents. The special coating allows for vibrant prints with all standard inkjet printer models.
Features:
- Color: white
- Coating: glossy
- Size: 4'' x 6'' (100 x 150 mm)
- Weight: 150 g
- Packaging: 50 sheets
- fast-drying
- long-lasting color conservation
- suitable for use with all standard inkjet printers
Applications:
- perfect for printing photos, brochures, etc.


Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200.
Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is. With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times.


• Ideal for sales documentation and brochures
• For high-quality matt image and text documents
• Instantly dry and smudge-proof through effective drying formula
• Special matt coating for very good colour reproduction and high-contrast prints
• Extra strong paper quality for high-quality prints
Get especially high-quality printing results with the inkjet paper from Avery Zweckform! The special matt coating ensures very good colour reproduction and high contrast prints. The A4 inkjet paper, with extra strong paper quality of 150 g/m², is instantly dry & smudge-proof after printing thanks to an effective dry formula. The inkjet paper from Avery Zweckform is ideal for professionally printing sales documents and brochures containing a lot of images and text.
Product description:
• Uses: Communication, presentation, selling
• Format: 210 x 297 mm
• Paper weight: 150 g/m²
• Printer: inkjet
• Colour: white
• Material: paper
• Coating: single-sided - matt
• Environmental aspect: non-chlorine bleached, FSC
• Size: DIN A4
• For: Sales documents brochures
• Sheets / package: 100

Thanks to the convenient battery, you can carry out printing tasks anywhere. The print job is sent wirelessly from your PC, laptop or mobile phone- for borderless photos and documents up to A4 size. And if speed is of the essence, you can store up to five templates and print them at the touch of a button.
- LC display: 1.44-inch OLED display (black and white)
- Dimensions: (W x D x H), 322x185x66 mm
- Maximum paper capacity: up to 50 sheets
- Interfaces: USB, Wi-Fi
- B/W print speed: approx. 9.0 ISO pages/minute
- Colour print speed: approx. 5.5 ISO pages/minute


Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200.
Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is. With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times.

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200.
Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is. With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times.

Premium quality original Bungard base material.
Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.

Premium quality original Bungard base material.
Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200.
Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is. With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times.

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200, at 25 - 30°C in 25 - 90s depending on how fresh the bath is.
With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times

Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.

Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.

• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue

• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue

• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200, at 25 - 30°C in 25 - 90s depending on how fresh the bath is.
With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15min
500W Nitraphot 6 - 7min
At a distance of approx. 30 cm and max. format 150x200.
Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is.
Etching times: with a fresh ammonium persulphate bath at 40 - 50°C: 5 - 10 minutes. Please see our main catalogue for more information on exposure and etching times

• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue

• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue

Exposure times:
30W UV tubes 60-90s
1000W halogenl. 45-70s
250W Nitraphot 12-15min
500W Nitraphot 6- 7min
with approx. 30cm distance and max. format 150x200.
Development times: at 25-30°C in 25-90s depending on the freshness of the bath.
Etching times: At freshly prepared ammonium persulfate bath of 40-50°C: 5-10min.