THERMO FLÄCHENHEIZUNGSSYSTEME THF-4760 - Heating foil, 12 V, 3 W PTC, 47x60 mm, individual
21.94 EUR
Access the complete sheet with information, compare prices and discover the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
Self-adhesive heating foils from German manufacture for universal application. The heating foils are both splice and puncture resistant. Application examples :
• device technology
• circuit technology
• housing technology
• aquariums
• liquids
• automotive
• flexible
Note: cable length approx. 10 cm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Self-adhesive heating foils from German manufacture for universal application. The heating foils are both splice and puncture resistant. Application examples :
• device technology
• circuit technology
• housing technology
• aquariums
• liquids
• automotive
• flexible
Note: cable length approx. 10 cm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
• Device technology
• Circuit technology
• Housing technology
• Aquariums
• Fluids
• Motor vehicle
• Flexible
• Device technology
• Circuit technology
• Housing technology
• Aquariums
• Fluids
• Motor vehicle
• Flexible
• Device technology
• Circuit technology
• Housing technology
• Aquariums
• Fluids
• Motor vehicle
• Flexible
• Device technology
• Circuit technology
• Housing technology
• Aquariums
• Fluids
• Motor vehicle
• Flexible
- Table power li>
- Plastic housing IP67 li>
- Universal input li>
- protected against short circuit, overload, overvoltage li>
- Isolation class II li>
- low idle power li>
- Energy efficiency level VI (DOE) li> ul>"
- Complies with ATX 3.1 and PCIe 5.1
- Two-tone design
- Cable overtemperature protection (ASRock Taichi/Phantom Gaming Series PSU only)
- The 12-V-2x6 format is backwards compatible with 12VHPWR
- L-type 12-V 2x6 connector (GPU side) to 12-V 2x6 connectors (power supply side)
- Maximum rated power 600 W
- 16 AWG (American Wire Gauge) size
- HCS (High-Current System) connectors with 94-V-0 plastic material for 12-V 2x6 connector housings
- Power requirement 750 W or more
Space-saving 90° connection
Easily connect your graphics card without worrying about the cable's bending radius. The right-angled design enables tighter installation and better cable management.
Note: Compatibility may vary depending on the GPU model. Ensure that all four signal pins on the connector side are correctly aligned."
• Device technology
• Circuit technology
• Housing technology
• Aquariums
• Fluids
• Motor vehicle
• Flexible
IP65 protected
DC compatible
Operating conditions:
MTBF: 850,400 h
Operating expectancy:
Operating temperature: -40°C - 70°C
Input
Mains frequency: 47 Hz - 63 Hz
DC input voltage: 80 V - 264 V
DC input voltage: 254 V - 370 V
Input current: 0.8 A
Efficiency: 92%
Idle power: less than 0.075 W
Max. leakage current: 0.1 mA
Inrush current: max. 100 A
Connection type, input: CEE 7/7 contour connector
Output
Number of outputs: 1
Output power: 180 W
Output voltage: 12 V
Output voltage selectable: no
Output current: 15 A
Overload protection: yes
Overload protection version: Hiccup
Short-circuit protection: yes
Over-voltage protection: yes
Overheating protection: yes
Connection type, output: XLR 4-pin
Power cable length, output: 100 cm
Security
Protection rating: IP67
Protection class: II
Medical protection classification: -
Dimensions LxWxH: 195 mm x 68 mm x 39.5 mm
Weight: 1320 g
- The power supply unit is designed for mounting on a DIN rail and boasts a wide range of applications, such as in industry, in low-voltage installations such as CCTV or alarm systems.
- The power supply also features protective functions: overload, short circuit and overvoltage.
- A diode indicates that the power supply is switched on.
Ideal for industrial, professional or private use.
- Desktop power supply
- Universal input
- Overload protection, auto recovery
- Protected against short circuit, overload and over-voltage
- Energy efficiency level VI (DoE), ERP, CoC tier 2
- Suitable for indoor applications
- Safety standards: EN62368-1
- EMC standards: EN55032 Class B.
Technical features:
Input voltage: 90 - 264 V AC
Output voltage: 12 V DC
Output current: 7.5 A
Output: max. 90 W
Ripple & noise: 270 mV
Connection: DC power plug 2.5 x 5.5 mm
Power connection: C14 (not supplied)"
Responds to rain or snow, gold-plated surface, switch polarity and sensitivity adjustable, selectable PTC heating prevents icing/condensation and accelerates drying, with 24 V operating voltage.
Operating principle:
Electrolytic impedance measurement using AC signal evaluation, safe operating principle, adjustable sensitivity, integrated PTC-heating with automatic adjustment to the ambient air temperature, as a protection against pressure compensating membrane to protect against effects of condensation
Technical data
Measurement method: electrolytic AC impedance measurement
Sensor surface: 70 x 54 mm, gold-plated
Operating voltage: 24 V DC/AC +10%
Power consumption: 40 mA
Heating: 80 - 300 mA (PTC)
Contact load: max. 30 V/4 A
Housing: ABS, grey, with pressure compensating membrane
Dimensions: approx. 85 x 85 x 60 mm
Cable inlet: M16
Areas of application: Nurseries, agriculture, awning control, conservatories
Included in delivery: Precipitation sensor in housing, cable gland, documentation
- Desktop power supply
- universal AC input / full range
- Protections: short circuit/over load/over voltage
- Insulation Class I
- very low no load power consumption
technical specifications::
- Input voltage: 90 - 264 V AC / 127 - 370 V DC
- Output voltage: 12 V DC / 6,67 A
- Power: 80 W
- Ripple & Noise: 120 mVp-p
- Efficiency: 89%
- Input Inrush Current, Max.: 70 A
- Operating Temperature: -30 ... +70 °C
- size: 145 x 60 x 32 mm
- Weight: 0,45 kg
The appropriate cable: NKSK 200 SW (not supplied)"
Universal laptop power supply unit for on the go and at home - powerful, flexible, compatible
This 90-W universal power supply for notebooks is the perfect solution as a replacement power supply unit or second charger. Thanks to 8 interchangeable DC adapters and variable output voltage (12 V - 22 V), it is suitable for a wide range of popular laptop brands such as HP, Lenovo, Dell, Acer, Asus and many more. With the additional USB-A port, smartphones or tablets can also be conveniently charged.
Features:
- Desktop power supply
- Universal input
- Overload protection, auto recovery
- Protected against short circuit, overload and over-voltage
- Energy efficiency level VI (DoE), ERP, CoC tier 2
- Suitable for indoor applications
- Safety standards: IEC/EN 62368-1
- EMC standards: EN55032 Class B
- Two-year manufacturer warranty
Technical data:
- Housing: desktop power supply unit
- Dimensions (W x H x D): 134.5 mm x 25.4 mm x 58.8 mm
- Weight: 350 g
- MTBF: 100,000 h
- Min. mains frequency: 47 Hz
- Max. mains frequency: 63 Hz
- Min. AC input voltage: 90 V
- Max. AC input voltage: 264 V
- Input current: 1.5 A
- Connection type, input: IEC-320 C14
- Overvoltage protection: yes
- Overtemperature protection: no
- Surge protection: yes
- Short-circuit protection: yes
- Connection type, output: 5.5 x 2.1-mm DC power plug
- Output power: 90 W
- Output voltage: 15 V
- Output current: 6 A
- Number of outputs: 1
- Idle power: less than 0.15 W
- Leakage current: max.: 0.75 mA
- Inrush current: max. 120 A
- Ripple: 180 mVp-p
- Isolation voltage I/P-O/P: 3000 V 180 mVpp.
- Insulation voltage I/P-FG: 1800 V
Fine, slim soldering iron handle
RTM tip with active heating technology for fine micro soldering. Order separately.
Active cutting-edge technology
The RTM tips combine functions such as a built-in sensor and perfect heat transfer for the fastest heating and recovery times.
Reduced downtime
For faster and more efficient workflow and better results.
Patented tip and handle design
Quick and trouble-free tip changes without the need for additional tools.
Precise control, ergonomic handle
The design of the boomerang handle allows precise handling while providing an ergonomic and secure grip.
- Universelles AC/DC Hutschienen-Schaltnetzteil
- Montage: Hutschiene (DIN Rail) TS-35
- Ausgangsspannung: 12 V
- Ausgangsleistung: 15 W
- Ausgangsstrom: 1,25 A
- Niedriger Stromverbrauch im Standby-Modus
- Wirkungsgrad bei 230 V AC: 85 %
The new LED transformers from Global Leader Power of the AGV series, have been specially developed for LED applications. The constant voltage power supplies are characterized by their high quality and space-saving design and are ideal for indoor applications with limited mounting space.
Features:
- Output: 15,96 W, 12 V DC, 1,33 A
- meets standards required for LED operation, such as EN55015
- Desktop power supply
- universal AC input / full range
- Protections: short circuit/over load/over voltage
- Insulation Class I
- very low no load power consumption
technical specifications::
- Input voltage: 90 - 264 V AC / 120 - 370 V DC
- Output voltage: 12 V DC / 15 A
- Power: 180 W
- Ripple & Noise: 80 mVp-p
- Efficiency: 90%
- Input Inrush Current, Max.: 120 A
- Operating Temperature: -30 ... +70 °C
- size: 210 x 85 x 48 mm
- Weight: 1,1 kg
The appropriate cable: NKSK 200 SW (not supplied)"
- New version, backwards compatible
The new version of the 12+4-pin connector conforms to the PCIe CEM-5.1 standard of the ATX-3.1 specification and is known as 12V-2x6. It is backwards compatible with the previous 12VHPWR version. The shortened sense pins (on the bottom of the adapter) ensure that communication between the graphics card and the power supply unit can only take place when the plug is fully inserted, thereby enabling maximum performance to be reliably achieved. A correct connection between the adapter and the cable is therefore crucial.
NVIDIA GeForce RTX-4000 series graphics cards use the new PCIe-5.0 standard 16-pin (12+4-pin) connector for their power supply. This adapter has been developed to avoid excessive cable bending."
- Desktop power supply
- Universal input
- Highly efficient & low standby power consumption
- Overload and short circuit protection
- DC output: DC power plug 2.1 x 5.5 mm x 10 mm
- Complies with EuP3/DOE VI standard
Technical data:
- Input voltage: 90 - 264 V AC
- Output voltage: 12 V/7.0 A
- Output: 90 W
- Residual ripple: 200 mV pp
- Efficiency: 88%
- Inrush current: max. 100 A
- Operating temperature: -10 to +40°C
- Size: 105 x 48 x 36 mm
- Weight: 360 g
Without mains cable, please order separately (see Accessories)."
Compact. Powerful. Versatile. Increase your productivity
Production in the electronics, medical technology and aviation industries is only getting faster as components become smaller, more complex and more powerful. Today, surface mounting technology is the industry standard and has largely replaced through-hole technology. These SMDs are often the smallest components, which means that, when soldering these devices, you have to compensate to meet requirements by using nano-soldering tips.
Weller RT Nano/Pico soldering tips are designed for the smallest high-precision applications:
Soldering extremely small components such as SMDs from 0402 down to 01005
Soldering very small components and pads with average power requirements
To meet the most demanding specifications, you can choose between that are potential-free (MS versions) MIL-SPEC and IPC standard soldering tips
For micro-soldering applications in the electronics, aerospace, sensors, medical devices, military and automotive industries
DC compatible
LPS
Note: AC interchangeable plugs must be ordered separately.
Operating conditions:
MTBF: 1,272,800 h
Operating expectancy: 30,000 hours
Operating temperature: -30°C - 70°C
Input
Mains frequency: 47 Hz - 63 Hz
DC input voltage: 85 V - 264 V
DC input voltage: 113 V - 370 V
Input current: 2 A
Efficiency: 91%
Idle power: less than 0.5 W
Max. leakage current: 1.5 mA
Inrush current: max. 120 A
Connection type, input: IEC-320 C14
Output
Number of outputs: 1
Output power: 15 W
Output voltage:
Output voltage selectable: no
Output current: 0.83 A
Overload protection: yes
Overload protection version: Hiccup
Short-circuit protection: yes
Over-voltage protection: yes
Overheating protection: no
Connection type, output: 5.5 x 2.1 mm DC power plug
Power cable length, output: 150 cm
Security
Protection class: IP21
Protection class: II
Medical protection classification: 2*MOPP
Dimensions LxWxH: 48 mm x 28 mm x 55 mm
Weight: 112 g
Width: 12 mm
Height: 6.5 mm
Length: 15 mm
For semi-conductor housing: TO 220
Minimal heat resistance: 36.0 K/W
Semi-conductor mounting method: Screws
Heat sink mounting type: Screws
Surface: Black anodised
Material: AlMgSi0.5
15 watt, 220 volt
Length (light body): 437.4 mm
Distance between the pins approx. 12.5 mm
The Greencell car inverter is a device that changes a battery voltage of 12 V DC to 230 V so that any home device can also be used on the road. This model is designed for installations with voltage. The device supplies pure sine wave current, which allows the use of all types of devices.
Benefits:
- Car inverter (voltage regulator, inverter) for connecting devices that require 230 V AC to the vehicle system. Do you need an electrical outlet in your car? This is the right product for you.
- Do you need an inverter for 12 V or 24 V systems? Do you need a voltage regulator for a campsite or a lorry? You are sure to find the right inverter model in the GC range
- High-quality components, certified safety, zero failure - these are the three most important features of GC converters. Trust the specialists for fresh energy!
DC compatible
LPS
Note: AC interchangeable plugs must be ordered separately.
Operating conditions:
MTBF: 1,272,800 h
Operating expectancy: 30,000 hours
Operating temperature: -30°C - 70°C
Input
Mains frequency: 47 Hz - 63 Hz
DC input voltage: 85 V - 264 V
DC input voltage: 113 V - 370 V
Input current: 0.7 A
Efficiency: 91%
Idle power: less than 0.15 W
Leakage current: max.: 0.75 mA
Inrush current: max. 70 A
Connection type, input: IEC-320 C14
Output
Number of outputs: 1
Output power: 12 W
Output voltage:
Output voltage selectable: no
Output current: 0.8 A
Overload protection: yes
Overload protection version: Hiccup
Short-circuit protection: yes
Over-voltage protection: yes
Overheating protection: no
Connection type, output: 5.5 x 2.1 mm DC power plug
Power cable length, output: 150 cm
Security
Protection class: IP21
Protection class: II
Medical protection classification: 2*MOPP
Dimensions LxWxH: 48 mm x 28 mm x 55 mm
Weight: 112 g
The innovative power supply with wide-range input from 90-264 V/AC and stabilised output voltage in power classes of 18 W. The devices are suitable for installation in DIN flush-mounted sockets and furniture or for mounting on flat surfaces with unknown flammability. With a height of only 24.5 mm, there is even room to install the consumer in the flush-mounted socket.
Suitable for the following applications:
- IT/commercial (EN 60950-1)
- Home/smart home (EN 60335-1)
- LED (EN 61347-2-13)
- Medical (EN 60601-1 2xMOPP)
Technical data:
Output: 18 Watt
Input: 90-264 V AC
Output: 12 V DC/1.5 A
Temperature: -20 to 50°C
Efficiency: EuP III/DOE level VI
MTBF: 560,000 h at 25°
Environment: IP68
3% output voltage tolerance in idle
Tested to: EN55014-1, EN55014-2, EN55032, EN55024, EN60601-1-2, EN55011,
EN60950-1, UL60950-1, EN60335-1, EN61558-2-16, UL60950-1, EN60601-1,
UL60601-1, EN61347-2-13, EN61347-1
All N1h Egston products meet the new EU standard for efficiency and power dissipation (LV6).
Terminal contacts: spring-loaded terminals"
