TEXAS INSTRUMENTS OPA 177 GS - Operational amplifier, offset only 0.02mV, SO-8
12.83 EUR
Explore the detailed sheet rich in complete information, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
OpAmp single 600 kHz SO-8, OPA177GP, Texas Instruments, single design, input offset voltage 0.02 mV
Technical data:
• Design: single
• Input offset voltage: 0.02 mV
• Bandwidth: 600kHz
• Open loop gain: 6000 V/mV
• Slew rate: 0.3V/µs
• Operating temperature: -40 - +85°C
• Housing: SO-8
• Dual supply voltages: ±3 - ±18 V
• Voltage noise: 7.5 nV/vHz
• Supply current: 1.3mA
• SVHC: Yes SVHC
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
OpAmp single 600 kHz SO-8, OPA177GP, Texas Instruments, single design, input offset voltage 0.02 mV
Technical data:
• Design: single
• Input offset voltage: 0.02 mV
• Bandwidth: 600kHz
• Open loop gain: 6000 V/mV
• Slew rate: 0.3V/µs
• Operating temperature: -40 - +85°C
• Housing: SO-8
• Dual supply voltages: ±3 - ±18 V
• Voltage noise: 7.5 nV/vHz
• Supply current: 1.3mA
• SVHC: Yes SVHC
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
TEXAS INSTRUMENTS OPA 177 GP - Operational amplifier, low offset, 600Hz, 0.3V/us, DIP-8
14.76 EUR
Precision Operational AmplifierDescription:
The OPA177 precision bipolar op amp feature very low offset voltage and drift. Laser trimmed offset, drift and input bias current virtually eliminate the need for costly external trimming. The high performance and low cost make them ideally suited to a wide range of precision instrumentation. The low quiescent current of the OPA177 dramatically reduce warm-up drift and errors due to thermoelectric effects in input interconnections. It provides an effective alternative to chopper-stabilized amplifiers. The low noise of the OPA177 maintains accuracy. OPA177 performance gradeouts are available. Packaging options include 8-pin plastic DIP and SO-8 surface-mount packages.
Features:
• Low Offset Voltage: 25µV max
• Low Drift: 0.3µV/°C
• High Open-LoopP Gain: 130dB min
• Low Quiescent Current: 1.5mA typ
• Replaces Industry-Standard OP AMPS: OP-07, OP-77, OP-177, AD707, ETC.
Applications:
• Precision Instrumentation
• Data Acquisition
• TestT Equipment
• Bridge Amplifier
• Thermocouple Amplifier
TEXAS INSTRUMENTS OPA 227 UA - Operational Amplifier Single 8MHz SOIC-8
14.29 EUR
The OPAx22x series operational amplifiers combine low noise and wide bandwidth with high precision to make them the ideal choice for applications requiring both AC and precision DC performance. The OPAx227 is unity-gain stable and features high slew rate (2.3V/µs) and wide bandwidth (8MHz). The OPAx228 is optimized for closed-loop gains of 5 or greater, and offers higher speed with a slew rate of 10V/µs and a bandwidth of 33MHz.
TEXAS INSTRUMENTS OPA 37 GP - Operational amplifier, 1-fold, 11.9 V/µs, 63 MHz, DIP-8
15.22 EUR
ultra-low noise precision op-ampHousing: DIP-8
Manufacturer: Burr-Brown
TEXAS INSTRUMENTS OPA699ID - Operational Amplifier,1x, 1000 MHz, 1400 V/µs,SOIC-8
16.14 EUR
Wideband, High Gain Voltage Limiting AmplifierThe OPA699 is a wideband operation amplifier with voltage feedback that provides bipolar output voltage limitation and is stable for amplifications
= +4. Two buffered limiting voltages take control of the output
When he tries to cross these limits. This new output limiting architecture keeps the limiter offset error to ±10mV. The operational amplifier operates linearly within 20 mV of the limits.
Key features
- High linearity near the limit
- Fast recovery from overdrive: 1 ns
- Limiting voltage accuracy: ±10mV
- -3 dB bandwidth (G=+6): 260MHz
- Stable for G = +4V/V.
- Operation with ±5 V and +5 V is possible
TEXAS INSTRUMENTS OPA 1612 AID - Operational amplifier, 2-fold, 27 V/µs, 40 MHz, SO-8
18.94 EUR
OpAmp dual 40 MHz SO-8, OPA1612AID, Texas Instruments, dual design, input offset voltage 0.1 mVTechnical data:
• Version: dual
• Input offset voltage: 0.1mV
• Bandwidth: 40 MHz
• Open loop gain: 3162 V/mV
• Slew rate: 27 V/µs
• Operating temperature: -40 - +85°C
• Housing: SO-8
• Dual supply voltages: ±2.25 - ±18 V
• Description: precision, wide bandwidth
• Voltage noise: 1.1 nV/vHz
• Supply current: 7.2mA
SVHC: Yes SVHC
TEXAS INSTRUMENTS OPA 171 AID - Operational Amplifier Single 3MHz SO-8
11.45 EUR
The OPA171, OPA2171 and OPA4171 (OPAx171) are a family of 36V, single-supply, low-noise operational amplifiers with the ability to operate on supplies ranging from +2.7V (±1.35V) to +36V (±18V). These devices are available in micro-packages and offer low offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.
TEXAS INSTRUMENTS OPA 2340 EA/250 - Operational Amplifier Dual 5.5MHz VSSOP-8
11.91 EUR
OPA340 series rail-to-rail CMOS operational amplifiers areoptimized for low-voltage, single-supply operation. Rail-to-rail input/output and high-speed operation make them ideal for driving sampling analog-to-digital (A/D) converters. They are also well-suited for general purpose and audio applications as well as providing I/V conversion at the output of digital-to-analog (D/A) converters. Single, dual, and quad versions have identical specifications for design flexibility.
TEXAS INSTRUMENTS OPA 137 N/250 - Operational Amplifier Single 1MHz SOT-23-5
12.59 EUR
OPA137 series FET-input operational amplifiers are designed for low cost and miniature applications. In addition to small size (SOT-23-5 and MSOP-8 packages), they provide low input bias current (5pA), low quiescent currrent (220µA/channel), and high open-loop gain (94dB).
TEXAS INSTRUMENTS OPA335AIDR - Operational Amplifiers, 1.6 V/µs, 2 MHz, SO-8
11.66 EUR
Single CMOS operational amplifier with 0.05uV/C max. and single supplyDescription
The OPA334 and OPA335 series CMOS operational amplifiers use auto-zeroing techniques to simultaneously achieve very low offset voltage (max. 5µV) and near-zero drift over time and temperature. These high-precision miniature low-quiescent current amplifiers provide high input impedance and rail-to-rail output stroke. Single or dual power supplies up to +2.7V (±1.35V) and up to +5.5V (±2.75V) can be used. These operational amplifiers are optimized for low voltage operation with a single supply.
TEXAS INSTRUMENTS OPA 335 AIDBVT - Operational amplifier, 1.6 V/µs, 2 MHz, SOT-23-5
11.55 EUR
Single 0.05uV/C max, single-supply CMOS operational amplifierDescription
The OPA334 and OPA335 series of CMOS operational amplifiers use auto-zeroing techniques to simultaneously provide very low offset voltage (5µV max), and near zero drift over time and temperature. These miniature, high-precision, low quiescent current amplifiers offer high input impedance and rail-to-rail output swing. Single or dual supplies as low as +2.7V (±1.35V) and up to +5.5V (±2.75V) may be used. These op amps are optimized for low-voltage, single-supply operation.
The OPA334 family includes a shutdown mode. Under logic control, the amplifiers can be switched from normal operation to a standby current of 2µA. When the Enable pin is connected high, the amplifier is active. Connecting Enable low disables the amplifier, and places the output in a high impedance state.
The OPA334 (single version with shutdown) comes in MicroSIZE SOT23-6. The OPA335 (single version without shutdown) is available in SOT23-5, and SO-8. The OPA2334 (dual version with shutdown) comes in MicroSIZE MSOP-10. The OPA2335 (dual version without shutdown) is offered in the MSOP-8 and SO-8 packages. All versions are specified for operation from –40°C to +125°C.
Features
• Low Offset Voltage :5 µV (max)
• Zero Drift : 0.05 µV/°C (max)
• Quiescent Current: 285 µA
• Single-Supply Operation
• Single & Dual Versions
• Shutdown
• MicroSIZE Packages
Applications
• Transducer Applications
• Temperature Measurement
• Electronic Scales
• Medical Instrumentation
• Battery-Powered Instruments
• Handheld Test Equipment
TEXAS INSTRUMENTS OPA 171 AIDRLT - Operational Amplifier Single 3MHz SOT-553
13.04 EUR
The OPA171, OPA2171 and OPA4171 (OPAx171) are a family of 36V, single-supply, low-noise operational amplifiers with the ability to operate on supplies ranging from +2.7V (±1.35V) to +36V (±18V). These devices are available in micro-packages and offer low offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.
TEXAS INSTRUMENTS OPA 347 UA - Operational Amplifier Single 350kHz SO-8
12.17 EUR
The OPA347 is a micro Power, low-cost operational amplifier available in micro packages. The OPA347 (single version) is available in the SC-70 and SOT23-5 packages. The OPA2347 (dual version) is available in the SOT23-8 and WCSP-8 packages. Both are also available in the SO-8. The OPA347 is also available in the DIP-8. The OPA4347 (quad) is available in the SO-14 and the TSSOP-14.
TEXAS INSTRUMENTS OPA 380 AID - Operational Amplifier Single 90MHz SO-8
15.79 EUR
The OPA380 family of transimpedance amplifiers provides high-speed (90MHz Gain Bandwidth [GBW]) operation, with extremely high precision, excellent long-term stability, and very low 1/f noise. It is ideally suited for high-speed photodiode applications. The OPA380 features an offset voltage of 25µV, offset drift of 0.1µV/°C, and bias current of 50pA. The OPA380 far exceeds the offset, drift, and noise performance that conventional JFET op amps provide.
TEXAS INSTRUMENTS OPA 544 T - Operational amplifier, single, 1.4MHz, ±10 ... ±35V, TO-225-5
35.17 EUR
High-Current (4A Typ), High-Voltage, Operational AmplifierDescription:
The OPA544 is a high-voltage/high-current operational amplifier suitable for driving a wide variety of high power loads. High performance FET op amp circuitry and high power output stage are combined on a single monolithic chip. The OPA544 is protected by internal current limit and thermal shutdown circuits. The OPA544 is available in industry-standard 5-lead TO-220 and 5-lead surface mount power packages. Its copper tab allows easy mounting to a heat sink for excellent thermal performance. It is specified for operation over the extended industrial temperature range, –40°C to +85°C.
Features
• High Output Current: 2A min
• Wide Power Supply Range: ±10 to ±35V
• Slew Rate: 8V/µs
• Internal Current Limit
• Thermal Shutdown Protection
• Fet Input: IB = 100pA max
• 5-LEAD TO-220 Plastic Package
• 5-LEAD SMT Package
Applications:
• Motor Driver
• Programmable Power Supply
• Servo Amplifier
• Valves, Actuator Driver
• Magnetic Deflection Coil Driver
• Audio Amplifier
TEXAS INSTRUMENTS OPA 2337 UA - Operational amplifier 90dB 1.2V/µs SO-8
11.55 EUR
2x operational amplifier, cmos, single supply 3 mhz 1.2 v/µsHousing: SO-8
Manufacturer: Burr-Brown
TEXAS INSTRUMENTS OPA828ID - Operational amplifier, 1-fold, 45 MHz, 150 V/µs, ± 4 V ... ± 18
18.32 EUR
The Texas Instruments OPA828 operational amplifier with JFET input is a next-generation OPA627 and OPA827 operational amplifier (OPV) that combines high speed with high DC precision and AC performance. This op amp delivers low offset voltage, low drift over temperature, and is low noise with a noise floor of 60 nVRMS at 0.1 to 10 Hz. The OPA828 operates over a wide supply voltage range of ±4 V to ±18 V with a supply current of 5.5 mA/channel (typical).With AC characteristics including a gain bandwidth product (GBW) of 45 MHz, a slew rate of 150 V/µs, and precision DC characteristics, the OPA828 is an excellent choice for use in a wide range of systems. These include high-speed, high-resolution data acquisition systems such as 16-bit to 18-bit mixed-signal systems. This also includes transimpedance amplifiers (I/V conversion), filters, ±10 V precision front ends, and high impedance sensor interface applications.
Key features
- Input voltage noise: 0.1 Hz to 10 Hz: 60 nVRMS
- Low input bias current: 1 pA
- Input offset voltage: 50 µV
- Input offset drift: 0.45 µV/°C
- MUX-friendly inputs
- Gain bandwidth: 45 MHz
- slew rate: 150 V/µs
- 14-bit settling time: 120 ns
- Overload power limiter
- Wide input voltage range: ±4 V to ±18 V
Note
Drop-in replacement with extended functionality for OPA627
TEXAS INSTRUMENTS OPA 2188 AID - Operational Amplifier Dual 2MHz SOIC-8
14.4 EUR
The OPA2188 operational amplifier uses TI proprietary auto-zeroing techniques to provide low offset voltage (25µV, max), and near zero-drift over time and temperature. This miniature, high-precision low quiescent current amplifier offers high input impedance and rail-to-rail output swing within 15 mV of the rails. The input common-mode range includes the negative rail. Either single or dual supplies can be used in the range of +4.0 V to +36 V (±2 V to ±18 V).
TEXAS INSTRUMENTS NE 5532 D8 SMD - Operational amplifier, 2-fold, 9 V/µs, 10 MHz, , SOIC-8
10.38 EUR
NE5532x, Dual Low-Noise Operational Amplifiers Description:
The NE5532, NE5532A, SA5532, and SA5532A devices are high-performance operational amplifiers combining excellent DC and AC characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage.
Features:
• Equivalent Input Noise Voltage:
• 5 nV/vHz Typ at 1 kHz
• Unity-Gain Bandwidth: 10 MHz Typ
• Common-Mode Rejection Ratio: 100 dB Typ
• High DC Voltage Gain: 100 V/mV Typ
• Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 O
• High Slew Rate: 9 V/µs Typ
Applications:
• AV Receivers
• Embedded PCs
• Netbooks
• Video Broadcasting and Infrastructure: Scalable Platforms
• DVD Recorders and Players
• Multichannel Video Transcoders
• Pro Audio Mixers
TEXAS INSTRUMENTS NE 5534 D SMD - Operational amplifier, single, 10MHz, 13 V/µs, SO-8
10.78 EUR
Low-Noise Operational AmplifiersDescription
The NE5534 are monolithic high-performance operational amplifiers combining excellent dc and ac characteristics. Some of the features include very low noise, high output drive capability, high unitygain and maximum-output-swing bandwidths, low distortion, and high slew rate. These operational amplifiers are internally compensated for a gain equal to or greater than three. Optimization of the frequency response for various applications can be obtained by use of an external compensation capacitor between COMP and COMP/BAL. The devices feature inputprotection diodes, output short-circuit protection, and offset-voltage nulling capability. The NE5534 and NE5534A are characterized for operation from 0°C to 70°C.
Features:
• Equivalent Input Noise Voltage 3.5 nV//Hz
• Unity-Gain Bandwidth . . . 10 MHz Typ
• Common-Mode Rejection Ratio 100 dB Typ
• High DC Voltage Gain . . . 100 V/mV Typ
• Peak-to-Peak Output Voltage Swing 32 V Typ With Vcc± = ±18 V and Rl = 600 R
• High Slew Rate . . . 13 V/µs Typ
• Wide Supply Voltage Range ±3 V to ±20 V
• Low Harmonic Distortion
TEXAS INSTRUMENTS OPA 551 UA - Operational amplifier, 1-fold, 15 V/µs, 3 MHz, SO-8
15.84 EUR
OPA55x High-Voltage, High-Current Operational AmplifiersDescriptions:
The OPA551x devices are low-cost operational amplifiers with high-voltage (60-V) and high-current (200-mA) capability. The OPA551 is unity-gain stable and features high slew rate (15 V/µs) and wide bandwidth (3 MHz). The OPA552 is optimized for gains of 5 or greater, and offers higher speed with a slew rate of 24 V/µs and a bandwidth of 12 MHz. Both devices are suitable for telephony, audio, servo, and test applications.
These laser-trimmed, monolithic integrated circuits provide excellent low-level accuracy along with high output swing. High performance is maintained as the amplifier swings to its specified limits. The OPA55x devices are internally protected against overtemperature conditions and current overloads. The thermal shutdown indicator flag provides a current output to alert the user when thermal shutdown has occurred. The OPA55x devices are available in PDIP-8 and SOIC-8 packages, as well as a DDPAK-7/TO-263 surface-mount plastic power package. They are specified for operation over the extended industrial temperature range, –40°C to +125°C.
Features:
• Wide Supply Range: ±4 V to ±30 V
• High Output Current: 200 mA Continuous
• Low Noise: 14 nV/vHz
• Fully Protected:
- Thermal Shutdown
- Output Current-Limited
• Thermal Shutdown Indicator
• Wide Output Swing: 2 V from Rail
• Fast Slew Rate:
- OPA551: 15 V/µs
- OPA552: 24 V/µs
• Wide Bandwidth:
- OPA551: 3 MHz
- OPA552: 12 MHz
• Packages: PDIP-8, SOIC-8, or DDPAK/TO-263-7
Applications:
• Telephony
• Test Equipment
• Audio Amplifiers
• Transducer Excitation
• Servo Drivers
TEXAS INSTRUMENTS TL 061 CD SMD - Operational amplifier SO-8
11.35 EUR
Low-power JFET input operational amplifierHousing: SO-8
TEXAS INSTRUMENTS TL 071 CD SMD - Operational amplifier SO-8
10.32 EUR
Low-noise single JFET op-ampHousing: SO-8
TEXAS INSTRUMENTS LM 358 PE3 - Operational amplifier, 2-fold, 0.3 V/µs, 700 kHz, DIP-8
10.2 EUR
These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2904), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.
TEXAS INSTRUMENTS LMH 6643 MA - Operational Amplifier Dual 130MHz SO-8
11.81 EUR
The LMH664X family true single supply voltage feedback amplifiers offer high speed (130 MHz), low distortion (-62 dBc), and exceptionally high output current (approximately 75 mA)at low cost and with reduced power consumption when compared against existing devices with similar performance.
TEXAS INSTRUMENTS LMH 6672 MA - Operational Amplifier Dual 90MHz SO-8
14.19 EUR
The LMH6672 is a low cost, dual high speed op amp capable of driving signals to within 1 V of the power supply rails. It features the high output drive with low distortion required for the demanding application of a single supply xDSL line driver.
TEXAS INSTRUMENTS LM 10 CLN - Operational amplifier, 1-fold, 0.2 V/µs, 0.05 MHz, DIP-8
13.62 EUR
The LM10 series are monolithic linear ICs consisting of a precision reference, an adjustable reference buffer and an independent, high-quality operational amplifier. The unit can operate from a total supply voltage as low as 1.1 V or as high as 40 V, drawing only 270 µA. A complementary output stage swings within 15 mV of the supply terminals or will deliver ±20-mA output current with ±0.4-V saturation. Reference output can be as low as 200 mV.
TEXAS INSTRUMENTS NE 5532 DIP - Operational amplifier, 2-fold, 9 V/µs, 10 MHz, DIP-8
10.42 EUR
Internally compensated dual low noise op-ampHousing: DIP-8
TEXAS INSTRUMENTS LM 358 ADRG4 - Operational amplifier, 2-fold, 0.3 V/µs, 700 kHz, SO-8
10.49 EUR
These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply or split supply over a wide range of voltages.
TEXAS INSTRUMENTS TL 064 DIL TEX - Operational Amplifier, 4x, DIP-14
10.47 EUR
low power quad jfet op-ampHousing: DIL-14
TEXAS INSTRUMENTS TLC 271 CD SMD - Operational amplifier SO-8
11.29 EUR
LinCMOS programmable low-power op-ampHousing: SO-8
TEXAS INSTRUMENTS NE 5534 AD - Operational amplifier, 1-fold, 13 V/µs, 10 MHz, SO-8
11.14 EUR
NE5534x, 2-channel, 10-MHz, 32-V output swing low-noise op ampDescription:
The NE5534, NE5534A, SA5534, and SA5534A devices are high-performance operational amplifiers combining excellent dc and ac characteristics. Some of the features include very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, and high slew rate. These operational amplifiers are compensated internally for a gain equal to or greater than three. Optimization of the frequency response for various applications can be obtained by use of an external compensation capacitor between COMP and COMP/BAL. The devices feature input-protection diodes, output short-circuit protection, and offset-voltage nulling capability with use of the BALANCE and COMP/BAL pins (see Figure 10). For the NE5534A and SA5534A devices, a maximum limit is specified for the equivalent input noise voltage.
Features:
• Equivalent Input Noise Voltage: 3.5 nV/vHz Typ
• Unity-Gain Bandwidth 10 MHz Typ
• Common-Mode Rejection Ratio 100 dB Typ
• High DC Voltage Gain 100 V/mV Typ
• Peak-to-Peak Output Voltage Swing 32 V Typ With VCC± = ±18 V and RL = 600 O
• High Slew Rate 13 V/µs Typ
• Wide Supply-Voltage Range ±3 V to ±20 V
• Low Harmonic Distortion
• Offset Nulling Capability
• External Compensation Capability
Applications
• Audio Preamplifiers
• Servo Error Amplifiers
• Medical Equipment
• Telephone Channel Amplifiers
TEXAS INSTRUMENTS LMC 6484 IM - Operational amplifier, 4-fold, 1.3 V/µs, 1.5 MHz, SO-14
13.57 EUR
Ultra-low Bias Current, Precision CMOS Rail-to-Rail Input and Output Quad Operational AmplifierDescription:
The LMC6484 device provides a common-mode range that extends to both supply rails. This rail-to-rail performance combined with excellent accuracy, due to a high CMRR, makes this device unique among rail-to-rail input amplifiers. The LMC6484 is an excellent choice for systems, such as data acquisition, that require a large input signal range. The device is also an excellent upgrade for circuits using limited common-mode range amplifiers, such as the TLC274 and TLC279. Maximum dynamic signal range is maintained in low voltage and single-supply systems by the rail-to-rail output swing of the LMC6484. The rail-to-rail output swing of the LMC6484 is specified for loads down to 600 O. Specified low voltage characteristics and low power dissipation make the LMC6484 an excellent choice for battery-operated systems. See the LMC6482 for a dual CMOS operational amplifier with these same features.
Features:
• Rail-to-rail input common-mode voltage range (specified over temperature)
• Rail-to-rail output swing (within 20 mV of supply rail, 100-kO load)
• Specified 3-V, 5-V and 15-V performance
• Excellent CMRR and PSRR: 82 dB
• Ultra-low input current: 20 fA
• High voltage gain (RL = 500 kO): 130 dB
• Specified for 2-kO and 600-O loads
Applications:
• Data acquisition (DAQ)
• Oscilloscope (DSO)
• Intra-DC interconnect (METRO)
• Macro remote radio unit (RRU)
• Multiparameter patient monitor
• Merchant telecom rectifiers
• Train control and management
• Process analytics (pH, gas, concentration, force, and humidity)
• Three phase UPS
• Improved replacement for TLC274, TLC279
TEXAS INSTRUMENTS LM 324 ADR - Operational amplifier, 4-fold, 0.5 V/µs, 1.2 MHz, SO-14
10.25 EUR
These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.
TEXAS INSTRUMENTS OP 07 CP - Operational amplifier, 1-fold, 0.3 V/µs, 600 kHz, DIP-8
10.56 EUR
OP07CP, Low-Offset voltage (0.25mV) single operational amplifierDescription:
These devices offer low offset and long-term stability by means of a low-noise, chopperless, bipolar-input-transistor amplifier circuit. For most applications, external components are not required for offset nulling and frequency compensation. The true differential input, with a wide input-voltage range and outstanding common-mode rejection, provides maximum flexibility and performance in high-noise environments and in noninverting applications. Low bias currents and extremely high input impedances are maintained over the entire temperature range.
Features:
• Low Noise
• No External Components Required
• Replace Chopper Amplifiers at a Lower Cost
• Wide Input-Voltage Range: 0 to ±14 V (Typ)
• Wide Supply-Voltage Range: ±3 V to ±18 V
TEXAS INSTRUMENTS NE 5532 A DIP - Operational amplifier, 2-fold, 9 V/µs, 10 MHz, DIP-8
11.09 EUR
Dual Low-Noise Operational AmplifierDescription
The NE5532, NE5532A, SA5532, and SA5532A devices are high-performance operational amplifiers combining excellent DC and AC characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage.
Features
• Equivalent Input Noise Voltage: 5 nV/vHz Typ at 1 kHz
• Unity-Gain Bandwidth: 10 MHz Typ
• Common-Mode Rejection Ratio: 100 dB Typ
• High DC Voltage Gain: 100 V/mV Typ
• Peak-to-Peak Output Voltage Swing 26 V Typ With VCC± = ±15 V and RL = 600 ?
• High Slew Rate: 9 V/µs Typ
Applications
• AV Receivers
• Embedded PCs
• Netbooks
• Multichannel Video Transcoders
• Pro Audio Mixers
TEXAS INSTRUMENTS LM 3900 DIL - Operational amplifier, 4-fold, 0.5 V/µs, 2.5 MHz, DIP-14
10.54 EUR
Quadruple Norton Operational AmplifierDescription:
These devices consist of four independent, highgain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide bandwidth and large output voltage swing. The LM2900 is characterized for operation from –40°C to 85°C, and the LM3900 is characterized for operation from 0°C to 70°C.
Features:
• Wide Range of Supply Voltages, Single or Dual Supplies
• Wide Bandwidth
• Large Output Voltage Swing
• Output Short-Circuit Protection
• Internal Frequency Compensation
• Low Input Bias Current
• Designed to Be Interchangeable With National Semiconductor LM2900 and LM3900, Respectively
TEXAS INSTRUMENTS LM224N - Operational Amplifier, 4x, DIP-14
10.42 EUR
Low-power 4x operational amplifierHousing: DIL-14
TEXAS INSTRUMENTS LT1014DIN - Operational Amplifier, 4x, DIP-14
18.79 EUR
Operational Amplifier, 4x(quad precision)
Housing: DIL-14
TEXAS INSTRUMENTS NE 5532 AD - Operational Amplifier Dual 10MHz SOIC-8
10.49 EUR
The NE5532, NE5532A, SA5532, and SA5532A devices are high-performance operational amplifiers combining excellent DC and AC characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage.