STMICROELECTRONICS TDA7388 - 4 x 45 W 4-channel bridge car radio amplifier, Flexiwatt-25
16.46 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
4 x 45 W quad bridge car radio amplifier +1
Description
The TDA7388 is an AB class audio power amplifier, packaged in Flexiwatt 25 and designed for high end car radio applications. Based on a fully complementary PNP/NPN configuration, the TDA7388 allows a rail to rail output voltage swing with no need of bootstrap capacitors. The extremely reduced boundary components count allows very compact sets.
Features
• High output power capability:
– 4 x 45 W / 4 ? max.
– 4 x 26 W / 4 ? @ 14.4 V, 1 kHz, 10 %
• Low distortion
• Low output noise
• Standby function
• Mute function
• Automute at min. supply voltage detection
• Low external component count:
– Internally fixed gain (26 dB)
– No external compensation
– No bootstrap capacitors
Protections:
• Output short circuit to gnd, to VS, across the load
• Very inductive loads
• Overrating chip temperature with soft thermal limiter
• Load dump voltage
• Fortuitous open GND
• Reversed battery
• ESD
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
4 x 45 W quad bridge car radio amplifier +1
Description
The TDA7388 is an AB class audio power amplifier, packaged in Flexiwatt 25 and designed for high end car radio applications. Based on a fully complementary PNP/NPN configuration, the TDA7388 allows a rail to rail output voltage swing with no need of bootstrap capacitors. The extremely reduced boundary components count allows very compact sets.
Features
• High output power capability:
– 4 x 45 W / 4 ? max.
– 4 x 26 W / 4 ? @ 14.4 V, 1 kHz, 10 %
• Low distortion
• Low output noise
• Standby function
• Mute function
• Automute at min. supply voltage detection
• Low external component count:
– Internally fixed gain (26 dB)
– No external compensation
– No bootstrap capacitors
Protections:
• Output short circuit to gnd, to VS, across the load
• Very inductive loads
• Overrating chip temperature with soft thermal limiter
• Load dump voltage
• Fortuitous open GND
• Reversed battery
• ESD
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
FONTASTIC 251115 - In-car charger, 12 W, 2x USB-A
17.18 EUR
In-car charger ''Picco'', 12 W black 2x USB-A connectors 5 V/2.4 A, carbon-look housingPicco dual USB adapter for charging mobile phones, tablet PCs, navigation systems etc. in vehicles with 12 or 24 V. The two USB ports allow two devices to be charged simultaneously. The adapter offers maximum safety through overvoltage, overload and short circuit protection.
KENWOOD KW KDC-BT450DAB - Car radio, DAB+, CD, USB, BT, 4x 50W
146.8 EUR
The illumination colour of the LC display and the control buttons can be individually adapted to the vehicle interior. In addition to preset colours, there is also a choice of completely freely adjustable colour tones via RGB. In addition, the manual dimmer allows the brightness of the display and button illumination to be adjusted according to the ambient light. In addition to the 13-digit main display, the clearly arranged display has a 4-digit subline • particularly practical for displaying additional information such as the time.Special features
• Integrated DAB+ receiver as well as high-performance tuner for FM/MW/LW
• Seamless blending between DAB and VHF stations
• CD drive
• Bluetooth function for hands-free talking & A2DP audio playback incl. AVRCP 1.6 profile
• 2 phones can be paired in parallel
• 5 audio streaming devices can be paired simultaneously (Kenwood Music Mix)
• Spotify Control via Bluetooth for Android Smartphones
• Kenwood Remote App for Android smartphones
• USB port with 1.5 A ''Quick Charge'' charging function
• White LCD with 13-digit display segments and VA technology for better readability
• 13-band semi-parametric tone control & 7 pre-programmed tone patterns, drive EQ
• Bass Boost and Loudness function, sound tuning technology ''Sound Reconstruction''
• Preamplifier output with 2.5 V output level
• max. output power: 4 x 50 watts
• Detachable control panel with red button illumination
• cable microphone included
• Active DAB disc antenna included in delivery
• Particularly low power consumption when ignition is switched off
• prepared for factory-installed steering wheel remote control
VARTA VAR CAR CHARG II - USB charger, 45 W, USB-A, USB-C, car
28.5 EUR
Modernes Kfz-LadergerätUniverselle Kompatibilität mit jedem Fahrzeug (12V-24V) und 45W Ausgangsleistung machen das VARTA Autoladegerät zum unverzichtbaren Reisebegleiter.
- Kfz-Ladegerät 12 / 24 V
- 1x USB A, 1x USB Typ C
- universelle Kompatibilität
SCHIEFER LIGHTING SCHI 684439000 - T6.8G 6.8x45, 24 V, 2.4 W, C2F, 5K hrs, clear
10.97 EUR
T6.8G 6.8x45 mm, 24 V, 2.4 W, C2F, 5000 hours, clear telephone
SCHIEFER LIGHTING SCHI L147225001 - E14 DTW G45x78 250Lm 4W 920-927 Opal
14.55 EUR
LED E14 DTW Ball G45x78 230V 250Lm 4W 920-927 200° AC Opal Dim
SCHIEFER LIGHTING SCHI L277235012 - E27 Miror G45x75 350Lm 4W 825 Silver
16.19 EUR
LED E27 Fila Ball Top Mirror G45x75 230V 350Lm 4W 825 AC Silver Dim
SCHIEFER LIGHTING SCHI L024104509 - E14 Giant Candle C45x130 280Lm 4W 922
16 EUR
LED E14 Fila Giant Candle C45x130 230V 280Lm 4W 922 AC Clear Dim
SCHIEFER LIGHTING SCHI L147235012 - E14 Miror G45x75 350Lm 4W 825 Silver
16.19 EUR
LED E14 Fila Ball Top Mirror G45x75 230V 350Lm 4W 825 AC Silver Dim
SCHIEFER LIGHTING SCHI LF023922309 - E27 AX T45x130 190Lm 4.5W 922
18.17 EUR
LED E27 Fila FleX AX Tube T45x130 230V 190Lm 4.5W 922 AC Clear Dim
SCHIEFER LIGHTING SCHI L147245019 - E14 G45x78 250Lm 4.5W 819 Flame
14.81 EUR
LED E14 Fila Ball G45x78 230V 250Lm 4.5W 819 AC Flame Dim
SCHIEFER LIGHTING SCHI LF023830305 - E14 G45x75 250Lm 4W 922 Gold
15.58 EUR
LED E14 Fila Ball G45x75 230V 250Lm 4W 922 AC Gold Dim
SCHIEFER LIGHTING SCHI LT227247017 - Ba22d G45x80 LED lamp, 4.7 W, 470 lm, 2700 K
14.13 EUR
- The LED decorative bulb with a twisted filament, in a retro design reminiscent of carbon filament bulbs.
- Dimmable, creates atmospheric light.
- Suitable for your own home, bakeries, food and beverage outlets, hotels.
- Flicker-free bulbs create a very special ambience.
- The bulb that becomes the light fixture.
- The vintage classic as an economical LED.
Technical data
Ba22d filament ball G45x80 mm 230 V 470 lm 4.7 W 2700 K 927 360° AC milky frosted dimmable
SCHIEFER LIGHTING SCHI 023040270 - GU5.3 MR16 PMMC 50x50 268Lm 4W 827 45°
19.2 EUR
LED GU5.3 MR16 PMMC 50x50 12V 270Lm 4W 827 45° AC/DC Non-Dim
SCHIEFER LIGHTING SCHI LF023830301 - E14 G45x75 320Lm 4W 925 Frost
15.16 EUR
LED E14 Fila Ball G45x75 230V 320Lm 4W 925 AC Frosted Dim
TP-LINK TPLINK EAP615-W - Wi-Fi Access Point 2.4/5 GHz 1775 MBit/s PoE
113.26 EUR
AX1800-Wi-Fi 6-Wand-Accesspoint- Uplink: 1x RJ45 Gigabit Ethernet port
- Downlink: 3x Gigabit Ethernet ports
- 802.3af/at PoE
- 5 GHz up to 1201 Mbps
- 2.4 GHz up to 574 Mbps
Superior Wi-Fi 6
Meet the demands for fluid online activity for more devices at the same time.
The latest 802.11ax technologies such as 1024 QAM and long OFDM symbols enable the EAP to achieve the total speed of 1775 Mbps.
Seamless integration with the Omada SDN platform
The Omada Software Defined Networking (SDN) platform integrates network devices such as access points, switches and routers to provide 100% centralized cloud management and create a highly scalable network - all controlled from a single interface.
More than speed, security matters
Protect your network and data from brute force attacks and snooping with enterprise-class WPA3 security protection, portal authentication, and separate guest networks.
Effortless deployment with PoE
With 802.3af/802.3at Power over Ethernet support, there's no need to install additional cables in the building.
Plug in the existing Ethernet cables and you're ready to go.
Integrated Gigabit switch ports
Wired devices such as VoIP phones can be powered via PoE without additional power cables.
The four data ports (1 uplink + 3 downlinks) transmit data at gigabit speeds, allowing you to connect multiple devices to your gigabit network.
One of the downlink ports offers PoE pass-through to eliminate the need for an additional power supply for the connected PoE device.
Easy management with the Omada App
Follow the configuration instructions in the free Omada app to get set up in minutes.
With Omada, you can configure settings, monitor network status, and manage clients, all from the convenience of a smartphone or tablet.
Package contents:
- AX1800 Wall Plate WiFi 6 Access Point EAP615-Wall
- Installation Guide
- Mounting Kits
STMICROELECTRONICS MASTERGAN3 - GaN H-bridge, 600 V, 6.5/4 A, 0.225/0.45 Ohm ,QFN-31
20.06 EUR
The MASTERGAN3 is an advanced power system-in-package that integrates a gate driver and two enhancement-mode GaN transistors in an asymmetrical half-bridge configuration. The integrated GaN power transistors have a drain-source blocking voltage of 650 V and an RDS(ON) of 225 mOhm and 450 mOhm for the low and high sides, respectively.The high side of the embedded gate driver can be easily powered by the integrated bootstrap diode.The high side of the embedded gate driver can be easily powered by the integrated bootstrap diode.The MASTERGAN3 has UVLO protection for both the low and high driver sections, preventing the circuit breakers from operating at low efficiency or under hazardous conditions, and the latching function prevents cross-circuits.
Technical Features
- QFN 9 x 9 x 1 mm package
- RDS(ON) = 225 mOhm (LS) + 450 mOhm (HS)
- IDS(MAX) = 6.5 A (LS) + 4 A (HS)
The extended range of input pins allows easy interfacing to microcontrollers, DSP units or Hall effect sensors.
The MASTERGAN3 operates in the industrial temperature range of -40°C to 125°C.
The device is available in a compact 9x9 mm QFN package.
Special Features
- Asymmetrical half bridge
- Reverse current capability
- Zero regenerative loss
- UVLO protection on low-side and high-side
- Internal bootstrap diode
- Interlocking Function
- Dedicated pin for shutdown functionality
- Precise internal timing adjustment
- 3.3 V to 15 V Compatible Inputs with Hysteresis and Pull-down
- Overtemperature protection
- Reduced BOM
- Very compact and simplified layout
- Flexible, simple and fast design
Applications
- Switching power supplies
- Chargers and adapters
- High voltage PFC, DC-DC and DC-AC converters
- UPS systems
- Solar power
STMICROELECTRONICS MASTERGAN5 - GaN H-bridge, 600 V, 4 A, 0.45 Ohm, QFN-31
21.42 EUR
The MASTERGAN5 is an advanced power system-in-package that includes a gate driver and two enhancement-mode GaN power transistors in a half-bridge configuration.configuration.The integrated GaN power transistors have a drain-source blocking voltage of 650 V and an RDS(ON) of 450 mOhms, while the high-side of the integrated gate driver is readily
by the integrated bootstrap diode.
The MASTERGAN5 has UVLO protection for both the low-side and high-side of the low-side and high-side driver sections to prevent the circuit breakers from operating in low efficiency or hazardous conditions, and the interlock function avoids cross-circuits.
Technical data
- QFN 9 x 9 x 1 mm package
- RDS(ON) = 450 mOhm
- IDS(MAX) = 4 A
The extended range of input pins allows easy interfacing with microcontrollers,DSP units or Hall effect sensors.
The MASTERGAN4 operates in the industrial temperature range of -40°C to 125°C.
The device is available in a compact 9x9 mm QFN package.
Special Features
- Reverse current capability
- Zero Reverse Loss
- UVLO protection on low-side and high-side
- Internal bootstrap diode
- Interlocking Function
- Dedicated pin for shutdown functionality
- Precise internal timing adjustment
- 3.3 V to 15 V Compatible Inputs with Hysteresis and Pull-down
- Overtemperature protection
- Reduced BOM
- Very compact and simplified layout
- Flexible, simple and fast design
Applications
- Switching power supplies
- Chargers and adapters
- High voltage PFC, DC-DC and DC-AC converters
- UPS systems
- Solar power
SCHIEFER LIGHTING SCHI L272404922 - E27 G45x75 170Lm 3W DC 922
17.75 EUR
LED E27 Fila Ball G45x75 24V 170Lm 4W-AC 3W-DC 922 AC/DC Clear Non-Dim
EXSYS EX-6074P-2 - Network card, PCI Express, Gigabit Ethernet, 4x RJ45
294.14 EUR
PCIe Quad network card with 4x 1Gigabit, PoE- Supports four PoE Gigabit Ethernet ports with 15.40W or 30.20 W
- Supplies network end devices with power via the data line
- Supports 10/100/1000 Base-T Ethernet standard
- Fully compatible with IEEE 802.3at PoE+ (PSE) Type 1 and 2 operation
- Maximum power output: Type 1 = 15.40 W / Type 2 = 30.20 W
- Supports Auto-MDI/MDI-X Auto (for crossover cable)
- Supports Pair Swap/Polarity/Skew Correction
- Wake-on-LAN and remote wake-up
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
- 48KB Buffer Transmit/Receiver Chip / LED indication of data transmission
- Chipset: 4x Realtek RTL8111G
The EX-6074PoE-2 is a fast Quad Gigabit Ethernet PCIe card.
It can supply end devices such as IP telephones, IP cameras or WLAN access points with a voltage of 48VDC via the network cable.
This means that the end devices do not require additional sockets or expensive switches that support PoE.
The EX-6074PoE-2 provides you with a cost-effective solution with a maximum output of 34.20 W and a maximum data transfer rate of 1000 Mbps.
The various end devices can be supplied with power directly via the data lines.
This saves costs and increases flexibility as to where the end devices are installed.
The EX-6074PoE-2 supports half and full duplex as well as Nway auto-negotiation to automatically adapt to the network speed (10/100/1000 Mbit/sec.).
The card is also equipped with Auto-MDI/MDI-X.
Scope of delivery:
- EX-6074PoE-2
- Driver CD
- User manual
JVC CS-DR6940 - Built-in loudspeaker, 4-way system, 15x23 cm, 550 W
61.58 EUR
drvn Series 15 x 23 cm 4-Way Coaxial Speakers- 4-way coaxial
- Power handling 550 W max / 90 W RMS
- Frequency range: 56 - 21,000 Hz
- Sound pressure level: 86 dB/W.m
- 15 x 23 cm cone woofer made of carbon-mica composite material
- 6.6 cm polyether imide cone tweeter
- 2.5 cm polyether imide dome tweeter
- 1.5 cm polyether imide dome tweeter
- Ferrite magnet (woofer/midrange)
- Hybrid Surround
EATON ELP1600IEC - UPS, 1600 VA / 1000 W, RJ45, USB
449.02 EUR
Eaton Ellipse PRO 1600 IEC - 1600/1000 (VA/Watt) UPS- 1600 VA / 1000 Watt
- 8x IEC outputs: 4x overvoltage protection + battery backup, 4x overvoltage protection only
- Protection of the telephone/fax/modem line (RJ45)
- Display, USB interface, incl. USB cable
- Fan permanently active
- 36 months warranty incl. batteries*
The Eaton Ellipse PRO 650-1600VA is a line-interactive UPS, specially developed for the protection of workstations with demanding applications.
The Ellipse PRO is equipped with an LCD display for real-time status display and measured values.
It also has EcoControl sockets, which enable energy savings of up to 20 percent, as well as Advanced Surge Reduction (ASR) surge protection in accordance with the requirements of the IEC 616431-1 standard.
*Only valid in EU countries!
Energy-saving power supply protection for workstations
The LCD screen of the Eaton Ellipse PRO not only clearly displays the system status and measured values, it also makes it easier to configure the desired UPS settings.
The EcoControl function automatically deactivates the peripheral devices when the master device is switched off, thereby achieving energy savings of up to 20%.
The Automatic Voltage Regulation (AVR) function corrects voltage fluctuations immediately, so work can continue without battery operation if voltage drops or overvoltages occur.
The Ellipse PRO has high-performance overvoltage protection in accordance with IEC 61643-1.
It also protects data transmissions via Ethernet, Internet and telephone connections.
Simple integration and installation
The Ellipse PRO is optionally equipped with four (for 650/850 VA) or eight (for 1200/1600 VA) protective contact (DIN) or IEC sockets.
This makes it easy to connect standard computer configurations with peripheral devices.
Thanks to its extra-flat design, the Ellipse PRO can be easily installed in any office environment.
Possible applications include vertical installation (e.g. under the desk), horizontal installation (e.g. under the monitor), 19-inch rack mounting (optional 2U mounting kit) and wall mounting (optional mounting kit).
The Ellipse PRO is equipped with a USB port and comes complete with USB cable and the Eaton UPS Companion software, which ensures safe shutdown of the system, recording of energy consumption and easy configuration of UPS settings.
Comprehensive safety
- Three-year warranty, including on the batteries
- Unlimited warranty for the connected computer equipment (only in EU countries and Norway)
- The batteries are subjected to automatic self-tests at regular intervals, ensuring timely detection of batteries requiring replacement
- Easy-to-replace batteries help extend the life of the UPS
EATON ELP1200IEC - UPS, 1200 VA / 750 W, RJ45, USB
358.06 EUR
Eaton Ellipse PRO 1200 IEC - 1200/750 (VA/Watt) UPS- 1200 VA / 750 Watt
- 8x IEC outputs: 4x overvoltage protection + battery backup, 4x overvoltage protection only
- Protection of the telephone/fax/modem line (RJ45)
- Display, USB interface, incl. USB cable
- Fan permanently active
- 36 months warranty incl. batteries*
The Eaton Ellipse PRO 650-1600VA is a line-interactive UPS, specially developed for the protection of workstations with demanding applications.
The Ellipse PRO is equipped with an LCD display for real-time status display and measured values.
It also has EcoControl sockets, which enable energy savings of up to 20 percent, as well as Advanced Surge Reduction (ASR) surge protection in accordance with the requirements of the IEC 616431-1 standard.
*Only valid within the EU!
Energy-saving power supply protection for workstations
The LCD screen of the Eaton Ellipse PRO not only clearly displays the system status and measured values, it also makes it easier to configure the desired UPS settings.
The EcoControl function automatically deactivates the peripheral devices when the master device is switched off, thereby achieving energy savings of up to 20%.
The Automatic Voltage Regulation (AVR) function corrects voltage fluctuations immediately, so work can continue without battery operation if voltage drops or overvoltages occur.
The Ellipse PRO has high-performance overvoltage protection in accordance with IEC 61643-1.
It also protects data transmissions via Ethernet, Internet and telephone connections.
Simple integration and installation
The Ellipse PRO is optionally equipped with four (for 650/850 VA) or eight (for 1200/1600 VA) protective contact (DIN) or IEC sockets.
This makes it easy to connect standard computer configurations with peripheral devices.
Thanks to its extra-flat design, the Ellipse PRO can be easily installed in any office environment.
Possible applications include vertical installation (e.g. under a desk), horizontal installation (e.g. under a monitor), 19-inch rack mounting (optional 2U mounting kit) and wall mounting (optional mounting kit).
The Ellipse PRO is equipped with a USB port and comes complete with USB cable and the Eaton UPS Companion software, which ensures safe shutdown of the system, recording of energy consumption and easy configuration of UPS settings.
Comprehensive safety
- Three-year warranty, including on the batteries
- Unlimited warranty for the connected computer equipment (only in EU countries and Norway)
- The batteries are subjected to automatic self-tests at regular intervals, ensuring timely detection of batteries requiring replacement
- Easy-to-replace batteries help extend the life of the UPS
STMICROELECTRONICS TDA 7379 - Audio amplifier, 4x 13 W/2x 38 W, multiwatt-15
13.26 EUR
Audio Amp Speaker 1-CH Mono/2-CH Stereo/4-CH Stereo 38W Class-AB
STMICROELECTRONICS 27C160-100 - EPROM, 16 MB (2 MB x 8 / 1 MB x 16), 4.5 ... 5.5 V, FDIP42W
19.51 EUR
C-MOS UV-EPROMsHousing: F-DIL-42
2Mx8/1Mx16 100 ns
STMICROELECTRONICS 27C4001-90 - EPROM, 4 MB (512 K x 8), 4.5 ... 5.5 V, FDIP32W
18.43 EUR
C-MOS UV-EPROMsHousing: F-DIL-32
512Kx8, 100ns
STMICROELECTRONICS 27C512-100 - EPROM, 512 Kb (64 K x8), 4.5 ... 5.5 V, FDIP28W
16.88 EUR
C-MOS UV-EPROMsHousing: F-DIL-28
64Kx8 100ns
STMICROELECTRONICS 27C256-100 - EPROM, 256 Kb (32 K x 8), 4.5 ... 5.5 V, FDIP28W
17.18 EUR
C-MOS UV-EPROMsHousing: F-DIL-28
32Kx8 100ns
STMICROELECTRONICS 27C2001-100 - EPROM, 2 MB (256 K x 8), 4.5 ... 5.5 V, FDIP32W
18.01 EUR
C-MOS UV-EPROMsHousing: F-DIL-32
256Kx8 100ns
TP-LINK TPLINK EAP655-W - Wi-Fi Access Point 2.4/5 GHz 2976 MBit/s PoE
170.11 EUR
AX3000 WiFi 6 Access Point for wall mounting- Uplink: 1x RJ45 Gigabit Ethernet
- Downlink: 3x RJ45 Gigabit Ethernet
- 802.3af/at PoE
- 5 GHz up to 2402 Mbps
- 2.4 GHz up to 574 Mbps
Lightning fast AX3000 Wi-Fi 6 speeds
Wi-Fi 6 offers faster speeds, lower delays, less interference, and increased capacity.
Enjoy more than double the speed of Wi-Fi 5 with the new Business Wi-Fi 6 with speeds up to 2976 Mbps.
Security is more important than speed
Protect your network from brute force attacks and snooping with enterprise-class WPA3 security protection, portal authentication, and separate guest networks.
Integrated switch with 4 Gigabit ports
Wired devices such as VoIP phones can be powered without additional power cables.
The four data ports (1 uplink + 3 downlinks) transmit data at multiple gigabits, allowing you to connect multiple devices to your gigabit network.
One of the downlink ports offers PoE pass-through, so no additional power is required.
Effortless deployment with PoE power supply.
With 802.3af/802.3at PoE support, no additional cabling is required.
Plug it into existing network cabling and you're ready to go.
Seamless integration with Omada SDN
The Omada Software Defined Networking (SDN) platform integrates network devices such as access points, switches, and routers to provide 100% centralized cloud management and create a highly scalable network - all controlled from a single interface.
Easy management with the Omada app
Follow the configuration instructions in the Omada app to get set up in minutes.
With Omada, you can configure settings, monitor network status, and manage endpoints from the convenience of your mobile device.
Package contents:
- AX3000 Wall Plate WiFi 6 Access Point EAP655-Wall
- Installation guide
- Mounting Kits
TP-LINK TPLINK EAP115W - WLAN Access point 2.4 GHz 300 Mbps
44.68 EUR
300Mbit/s-WLAN flush-mounted access point- 2x RJ45 Fast Ethernet (1x uplink, 1x downlink)
- 300 MBit/s (2.4 GHz)
- Power supply via PoE (according to IEEE802.3af)
- 2 internal 1.8dBi omnidirectional antennas
- Mounting in flush-mounted box
Perfect shape
The EAP115-Wall looks good on almost any wall. Due to its slimline design, it protrudes only 11mm from the wall.
Easy mounting
Thanks to IEEE802.3af PoE support, the EAP115-Wall does not require an additional power cable. Just connect it to your PoE cable and you're done.
Excellent WLAN coverage
One EAP in each room ensures a strong WLAN signal and very good coverage.
Centralized Cloud Management- Anytime, Anywhere
With Omada Hardware Controller OC200 and Omada Software Controller, you can easily manage and monitor hundreds of EAPs from one central point, anywhere.
Business WLAN management has never been easier.
Even more convenient via Omada App
From your smartphone or tablet, you have convenient access and the ability to configure and manage wherever you are.
Scope of delivery:
- 300 MBit/s flush-mounted access point EAP115-Wall
- Installation instructions
- Mounting screws
TP-LINK TPLINK EAP650-W - Wi-Fi Access Point 2.4/5 GHz 2976 MBit/s PoE
91.59 EUR
AX3000 Wall Plate WiFi 6 Access Point- uplink: 1x RJ45 Gigabit Ethernet
- Downlink: 1x RJ45 Gigabit Ethernet
- 802.3af/at PoE
- 5 GHz: Up to 2402 Mbps
- 2.4 GHz: Up to 574 Mbps
Lightning-fast AX3000 Wi-Fi 6 speeds
Wi-Fi 6 offers faster speeds, lower delays, less interference and higher capacity.
Enjoy more than double the speed of Wi-Fi 5 with the new Business Wi-Fi 6 with speeds up to 2976 Mbps.
More than just speed, security counts too
Protect your network from brute force attacks and snooping with enterprise-class WPA3 security, portal authentication, and separate guest networks.
Effortless deployment with PoE operation
No additional cabling is required thanks to 802.3af/802.3at PoE support.
Just plug it into existing network cables and you're ready to go.
Automatic channel selection and transmit power adjustment to optimize overall performance
Provides powerful WLAN performance while significantly reducing WLAN interference by automatically adjusting channel settings and transmit power of neighboring APs on the same network.
Seamlessly integrated with omada SDN
The Omada Software Defined Networking (SDN) platform integrates network devices such as access points, switches and routers to enable 100% centralized cloud management and create a highly scalable network - all controlled from a single interface.
Easy management with the Omada app
Follow the configuration instructions in the Omada App and set up the system in minutes.
With Omada, you can adjust settings, monitor network status, and manage endpoints - all from the convenience of your mobile device.
Package contents:
- AX3000 Wall Plate WiFi 6 Access Point EAP650-Wall
- Installation guide
- Mounting Kit
TP-LINK TPLINK F52-W - Wi-Fi Access Point 2,4/5 GHz 1317 MBit/s PoE
92.54 EUR
AC1200 Wireless MU-MIMO Gigabit Wall Plate Access Point- 1x RJ45 Gigabit Ethernet (PoE In)
- 3x RJ45 Gigabit Ethernet (1x PoE-OUT max. 13 W with 802.3at PoE+ input)
- 5 GHz: Up to 867 MBit/s
- 2.4 GHz: Up to 300 MBit/s
Festa - A network solution for small businesses, no IT required
Festa offers business features with consumer-grade simplicity.
Accessible via the Festa app or web, the free cloud-based centralized management provides essential features for small businesses without the complexity required for larger operations.
AC1200 speeds, supported by MU-MIMO technology
Festa F52-Wall offers combined dual-band speeds of up to 1200 Mbps.
Equipped with 802.11ac Wave 2 MU-MIMO technology, it can simultaneously exchange data with multiple clients to connect more devices without slowing down the network.
Gigabit Wired Performance
Four Gigabit Ethernet ports provide full connectivity throughout the network for high-speed transmissions and allow you to connect multiple devices to your network.
Flexible deployment with PoE
With 802.3af/at PoE support, a single Ethernet cable provides both data and power.
Place your AP in optimal locations without the need for a separate power source.
Seamless, smooth and stable Wi-Fi
Seamless Wi-Fi ensures that all users enjoy uninterrupted connections when moving between different access points through 802.11 k/v/r seamless roaming technology.
Fast, flexible installation
Compatible with standard wall outlets and featuring an ultra-compact design, installation is easier than ever.
Included:
- Festa F52-Wall
- Installation instructions
- Mounting kit
STMICROELECTRONICS STP45NF06 - MOSFET N-Ch 60V 38A 80W 0,028R TO220
10.88 EUR
N-channel 60 V, 0.22 O typ., 38 A, STripFET™ II Power MOSFETfeatures
- Typical RDS(on) = 0.022 O
- Exceptional dv/dt capability
- 100% avalanche tested
- Standard threshold drive
applications
- Switching application
STMICROELECTRONICS STP11NM60ND - MOSFET N-Ch 600V 10A 90W 0.45R TO220
12.64 EUR
N-channel 600 V, 0.37 O, 10 A, FDmesh™ II Power MOSFETfeatures
- The worldwide best RDS(on)* area amongst the fast recovery diode devices
- 100% avalanche tested
- Low input capacitance and gate charge
- Low gate input resistance
- Extremely high dv/dt and avalanche capabilities
application
- Switching applications
STMICROELECTRONICS ST232CDR - RS232 transceiver, 2-channel, 220 kb/s, 5V, SO-16
10.31 EUR
The ST232 has two line drivers/receivers and is suitable for all EIA/TIA-232E and V.28/V.24 communication interfaces, especially for applications where ±12V is not available.Features
- 2x driver
- 2x receiver
- needs 4 external capacitors
- Industry standard
- ±30 V input level
AMD R7-8700G - AMD AM5 Ryzen 7 8700G, 8x 4.20 GHz, boxed
268.25 EUR
- CPU cores: 8
- Threads: 16
- Max. clock speed: 5.1 GHz
- Base clock speed: 4.2 GHz
- Overall L2 cache: 8 MB
- Overall L3 cache: 16 MB
- Standard power consumption/power consumption: 65 W
- AMD configurable TDP (cTDP): 45 - 65 W
- Processor technology for CPU cores: TSMC 4-nm FinFET
- Unlocked: Yes
- Socket: AM5
- Max. temperature: 95°C
Release: 2024/Q1
Please note!
Not every processor will run on every motherboard, even if they share the same socket size.
In some cases, a BIOS update on the motherboard or even a specific chipset is required.
STMICROELECTRONICS STP7NK40Z - MOSFET N-Ch+Z-Dio 400V 5.4A 70W 1R TO220
10.95 EUR
N-channel 400 V, 0.85 O typ., 5.4 A, SuperMESH™ Power MOSFETsfeatures
- Extremely high dv/dt capability
- 100% avalanche tested
- Gate charge minimized
- Very low intrinsic capacitance
- Zener-protected
applications
- Switching applications
SCHIEFER LIGHTING SCHI LF024030307 - Ba15d G45x75 350Lm 4W 927
14.96 EUR
LED Ba15d Fila Ball G45x75 230V 350Lm 4W 927 AC Clear Dim