STEINEL 009571 - Reducing nozzle 6 mm
17.18 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Reducing nozzle 6 mm.
For precise heating. For HM/HL/HG 1920 E, 2020 E, 2120 E, 2220 E, 2320 E and MobileHeat 3/5 hot air units.
EAN: 4007841009571
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Reducing nozzle 6 mm.
For precise heating. For HM/HL/HG 1920 E, 2020 E, 2120 E, 2220 E, 2320 E and MobileHeat 3/5 hot air units.
EAN: 4007841009571
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
STEINEL HL-BD75 - 75-mm wide jet nozzle for STEINEL HL 2300EM
19.46 EUR
75-mm wide jet nozzle — accessory for HG 2300 E heat gun
STEINEL 010287 - Quick welding nozzle 5 mm
46.12 EUR
Fast welding nozzle for attaching to 10 mm round nozzle.Ideal for welding applications with plastic welding rod up to 5 mm. For the HM/HG 2420 E, 2520 E, 2620 E, 2600 E and MobileHeat 7 hot air units.
STEINEL 011840 - Fast welding nozzle 5 mm narrow
46.12 EUR
Fast welding nozzle with narrow air slot for attaching to 5-mm round nozzle.Ideal for welding applications with plastic welding rod up to 5 mm. Thanks to the narrow air slot, it is also suitable for PU-coated floor coverings. For the HM/HG 2420 E, 2520 E, 2620 E, 2600 E and MobileHeat 7 hot air units.
STEINEL HL-BD50 - 50-mm wide jet nozzle for STEINEL HL 2300EM
18.94 EUR
50-mm wide jet nozzle — accessory for HG 2300 E heat gun
STEINEL 009076 - Round nozzle Ø 5 mm, extended
46.12 EUR
The extended round nozzle Ø 5 mm brings concentrated heat to a point through extension, even in hard-to-reach areas.Round nozzle extends by Ø 5 mm, for concentrated heat even in hard-to-reach areas. For the HM/HG 2420 E, 2520 E, 2620 E, 2600 E and MobileHeat 7 hot air units.
STEINEL 011765 - Fast welding nozzle 4 mm narrow
46.12 EUR
Fast welding nozzle with narrow air slot for attaching to 5-mm round nozzle.Ideal for welding applications with plastic welding rod up to 4 mm. Thanks to the narrow air slot, it is also suitable for PU-coated floor coverings. For the HM/HG 2420 E, 2520 E, 2620 E, 2600 E and MobileHeat 7 hot air units.
STEINEL 075316 - Fast welding nozzle 5 mm
41.98 EUR
Fast welding nozzle for attaching to 10 mm round nozzle.Ideal for welding applications with plastic welding rod up to 6 mm. For HG 2420 E, HG 2620 E, HG 2520 E, HG 4000 E and HG 2300 EM professional heat guns.
STEINEL 092313 - Round nozzle Ø 10 mm
45.08 EUR
Round nozzle Ø 10 mm, for precise heating. Serves as an adapter for the fast welding nozzle (art. no. .075316) for plastic welding. For the HM/HG 2420 E, 2520 E, 2620 E, 2600 E and MobileHeat 7 heat guns.
STEINEL 070717 - reduction Nozzle 14 mm
18.79 EUR
Full concentration. 14 mm reduction nozzle, for a concentrated flow of air, adapter for wide slit nozzle.
STEINEL 070311 - Spray nozzle 50 mm
17.7 EUR
Spray nozzle 50 mm.Protects against the overheating of glass panes, for example, by deflecting the escaping air. Ideal for restoration work. For HM/HL/HG 1620 S, 1820 S, 1821 S, 1920 E, 2020 E, 2120 E, 2220 E, 2320 E, MOBILEHEAT 1/3/5 hot air units.
STEINEL 070410 - Spray nozzle 75 mm
17.7 EUR
Spray nozzle 75 mm.Protects against the overheating of glass panes, for example, by deflecting the escaping air. Ideal for restoration work. For HM/HL/HG 1620 S, 1820 S, 1821 S, 1920 E, 2020 E, 2120 E, 2220 E, 2320 E, MOBILEHEAT 1/3/5 hot air units.
STEINEL 070618 - Rduction Nozzle 9 mm
18.79 EUR
Thats the point! 9 mm reduction nozzle, delivers hot air with pinpoint precision for desoldering and welding plastics with welding nozzle (Prod. No. 070915).
STEINEL 070915 - Welding nozzle
22.34 EUR
Welding nozzle.Can easily be plugged onto the 9-mm reducing nozzle. Ideal for processing plastic welding wire of up to 6 mm. For HM/HL/HG 1920 E, 2020 E, 2120 E, 2220 E, 2320 E and MobileHeat 3/5 hot air units.
STEINEL 071318 - Heat-shrink tubing I Ø 1.6 - 4.8 mm
14.24 EUR
Heat-shrink tubing I Ø 1.6 - 4.8 mm.For shrinking onto cable ends, breaks and harnesses. For HM/HL/HG 1620 S, 1820 S, 1821 S, 1920 E, 2020 E, 2120 E, 2220 E, 2320 E and MobileHeat 1/3/5 heat guns.
ATTEN A-1606 - Hot air nozzle, straight, Ø 6.5 mm for STATION GT-8102
17.18 EUR
Replacement hot air nozzle for STATION GT-8102
ATTEN A-2664 - Hot air nozzle, straight, Ø 6.5 mm
14.07 EUR
Replacement hot air nozzle for ST-862D, straight
ATTEN A-2104 - Hot air nozzle, straight, Ø 6 mm for STATION ST-8800/8802
12.01 EUR
Replacement hot air nozzle for STATION ST-8800 and ST-8802
WELLER SPITZE TNRB 60 - hot air round nozzle bent Ø 6 mm x 45°, for WTHA 1
82.29 EUR
Nozzle for Weller Hot Air Station
ERSA 0472CR - Hot air nozzle 0472CR, 6.0 mm, straight
25.44 EUR
Straight hot air nozzle for ERSA i-TOOL AIR S (0470BRJ).- Diameter / width: 6 mm
- Outside diameter shaft: 9.5 mm
- Overall length: 8 mm
STEINEL 087333 - Stripper Multi 1000
39.91 EUR
Multi-functional. Fast. Precise. 1 tool, 4 applications. An indispensable all-rounder for electrical professionals. With our handy stripper, cables and wires with thicknesses from 0.5 - 6mm² can be quickly and precisely stripped and cut for both longitudinal and radial cuts. The sharp and precise cutting allows for precise removal of external insulation from cables without damaging the underlying conductors. Perfect for a wide range of electrical installation and wiring work.
FESTO 130623 - Reducing adapter, straight, dia. 6 mm <> dia. 10 mm
16.43 EUR
Connector, QS-10H-6Technical data:
- Size: standard
- Nominal diameter: 3.8 mm
- Installation position: any
- Design: straight
- Constructive design: push-pull principle
- Operating pressure, complete temperature range: -0.095 to 0.6 MPa
- Operating pressure, complete temperature range: -0.95 to 6 bar
- Operating pressure. complete temperature range: -13.775 to 87 psi
- Temperature-dependent operating pressure: -0.095 to 1.4 MPa
- Temperature-dependent operating pressure: -0.95 to 14 bar
- Temperature-dependent operating pressure: -13,775 to 203 psi
- Note on operating pressure: water: max. 0.6 MPa at max. 50°C
- Operating medium: compressed air according to ISO 8573-1:2010 [7:-:-]
- Water (liquid, ice-free)
- Note on the operating/control medium: oiled operation is possible
- Corrosion resistance class KBK: 1 - low corrosion stress
- LABS conformity: VDMA24364-B1/B2-L
- Cleanroom class: Class 4 according to ISO 14644-1
- Ambient temperature: -10°C to 80°C
- Product weight: 4.5 g
- Pneumatic connection 1: push-in sleeve diameter 10 mm
- Pneumatic connection 2: for tube outer diameter of 6 mm
- Colour of release ring: blue
- Note on materials: RoHS-compliant
- Housing material: PBT
- Release ring material: POM
- Material of tube gasket: NBR
- Material of tube clip segment: high-alloy stainless steel
WELLER SPITZE XDS 6 - XDS 6 suction nozzle
25.44 EUR
Suction nozzle for WXDP (1 piece) inner Ø 1.2 mm, outer Ø 2.5 mm, nozzle length 10.5 mm
STEINEL SET 12 - Heat gun accessory, set, 12 pcs
83.33 EUR
12-piece heat gun accessory set for STEINEL heat gun.• Large selection of different nozzles for hot air always on target:
75-mm wide jet nozzle
75-mm spray nozzle
Restrictor nozzle in both 9 + 14 mm
Wide slot nozzle
Welding nozzle
Reflector nozzle
• Spatula
• Scraper handle with 3 blades
Not for STEINEL HL2300EM!
HAZET HZ 4850-1 - Nozzle adjuster
20.91 EUR
Application:
Adjustment of the nozzles e.g.
- telescopic rod extended
- magnet head: 6 mm ?
- Adjustment needle (? 0,7 mm) and protective cap
- Retaining / pocket clip
- Dimensions / Length: 670 mm
- Length l1: 155 mm
- Net weight (kg): 0.03 kg
by windscreen washer system
- shows direction of beam of the nozzles on the disc at
SMC PNEUMATIK KQ2T04-06A - T-connector, 2x Ø 4 mm <> 1x Ø 6 mm
13.93 EUR
T-connector with reducing adapterFor branching tubes 90° in both directions with reduction in diameter
For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T06-04A - T-connector, 2x Ø 6 mm <> 1x Ø 4 mm
13.67 EUR
T-connector with reducing adapterFor branching tubes 90° in both directions with reduction in diameter
For nylon, soft nylon, PUR tubes
For water and compressed air
WELLER SPITZE XDSL 6 - Desoldering tip XDSl 6, 1.9 mm, round, straight
32.68 EUR
Suction nozzle for WXDP (1 piece) inner Ø 1.2 mm outer Ø 2.5 mm nozzle length 10.5 mmWeller suction nozzles are designed to remove solder from all types of solder joints. They are heated and melt the solder. When the vacuum on the desoldering iron is switched on, the liquid solder is extracted via the tube in the nozzle into the solder collector.
FLASHFORGE FF 20003124001 - 3D printing, left nozzle, 0.6 mm, for Creator 3 Pro
77.03 EUR
Nozzle assembly- Version: left
- Bore size: 0.6 mm
- Suitable for: FlashForge Creator 3 Pro
FLASHFORGE FF 20003131001 - 3D printing, hardened left nozzle, 0.6 mm, for Creator 3 Pro
77.03 EUR
Nozzle assembly, hardened- Version: left
- Bore size: 0.6 mm
- Suitable for: FlashForge Creator 3 Pro
FLASHFORGE FF 20004090001 - 3D printing, hardened nozzle, 0.6 mm, for Adventurer 5M Pro
46.02 EUR
Hardened nozzle assembly for FlashForge Adventurer 5M seriesCompatible with the following models
- FlashForge Adventurer 5M
- FlashForge Adventurer 5M Pro
FLASHFORGE FF 80002872001 - 3D printing, hardened steel nozzle, 0.6 mm, Creator 3P/4/Guider
30.52 EUR
Hardened steel nozzleThe hardened steel nozzles provide improved durability when handling abrasive materials such as carbon, wood and metal PLA connections.
Compatibility
- FlashForge Creator 3 Pro
- FlashForge Creator 4
- FlashForge Guider 3/3 Plus
SMC PNEUMATIK KQ2T08-06A - T-connector, 2x Ø 8 mm <> 1x Ø 6 mm
14.08 EUR
T-connector with reducing adapterFor branching tubes 90° in both directions with reduction in diameter
For nylon, soft nylon, PUR tubes
For water and compressed air
MICRO SWISS MSWISS M2598-06 - 3D printer nozzle, 0.6 mm, Ultimaker 3/S3/S5
28.04 EUR
This is a brass-coated wear-resistant nozzle for the Ultimaker 3/S5 Print Core AA.The nozzle is made of a 360 brass base material and is coated with a TwinClad XT coating. TwinClad XT is a nickel composite coating for very low friction. It provides one of the lowest coefficients of friction, better than nickel with PTFE co-deposition.
The TwinClad XT coating is also very hard and abrasion resistant. If you work with abrasive carbon fibres, stainless steel, wood-filled or other metal-filled filaments, this device will significantly improve the life of your nozzle.
Suitable for:
- Ultimaker 3
- Ultimaker S5
FABCONSTRUCT FABC 95013 - 3D printing, nozzle, copper alloy, 0.6 mm, for Bambu Lab X1/P1 s
30.57 EUR
- Copper alloy nozzle
- Stable
- High thermal conductivity up to 500°C
- Various sizes available
Compatibility
- Bambu Lab X1 series
- Bambu Lab P1 series
Excellent printing stability
The thermal bridge and heating block are crimped to prevent leaks and waste.
Fast heat conduction improves printing efficiency
The improved heating block is made of nickel-plated chromium-zirconium-copper material. It can withstand high temperatures of up to 500°C and achieve rapid heat conduction, improving printing efficiency.
The smaller the size, the more detailed the models.
- 0.6 mm nozzle
- Optimum print quality
- Extremely small distance between layers
- More details on the vertical print surface
The larger the size, the faster the printing speed.
- 0.6 mm and 0.8 mm nozzle
- Higher printing speed
- A larger diameter extrudes more material per second, resulting in higher print speeds.
MICRO SWISS MSWISS M2549-06 - 3D printing. Nozzle. 0,6 mm
27.51 EUR
This is MK6 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.Fits:
- Alfawise U20
- Alfawise U30
- Anet A8
- BQ Prusa I3 Hephestos
- BQ Witbox
- CraftBot 2
- CraftBot PLUS
- CR-10
- CR-10 V2
- CR-10 MINI
- CR-10-S4
- CR-10-S5
- CR-10S
- Ender 2
- Ender 3
- Ender 3 Pro
- Ender 5
- Ender 5 Plus
- Ender 5 Pro
- Flsun QQ-S
- Geeetech A10, A20, A30
- MakerBot Replicator 1
- MakerBot Replicator 2
- MakerBot Replicator 2x
- MakerBot Replicator 5th Gen
- MakerBot Replicator Mini
- MakerBot Replicator z18
- Micro Swiss All Metal Hotend for CR-10 (M2583-04)
- Micro Swiss All Metal Hotend for CR-10s Pro (M2591-04)
- Snapmaker 3-in-1 3D Printer
- Tevo Tornado
- TronXY X5S
MICRO SWISS MSWISS M2551-06 - 3D printing. Nozzle. 0,6 mm
27.51 EUR
This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.Fits:
- E3D 3mm Filament
- Olson Block
- Ultimaker 2+
- Lulzbot SL Toolhead
- Taz Workhorse