SMARTWARES SW RM520 - Smoke detector with 10 year battery
24.37 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
Smoke Alarm RM520
With the Smartwares RM520 smoke detector you can act in time in case of fire.
The smoke detector has an integrated battery that does not need to be replaced.
With the 85 dB loud alarm sound, you can avoid life-threatening situations.
A smoke alarm saves lives
A fire can break out at any time, even when you are asleep.
The toxic gas can cause you to pass out and not wake up.
However, if a fire breaks out, it is important to wake up in time.
A smoke alarm will warn you in time, so you can quickly respond to life-threatening situations.
It should be taken into account that smoke alarms have a maximum lifespan of 10 years.
Therefore, always check the date of your smoke alarm and buy a new device every 10 years.
This is the only way to ensure that your smoke alarms are working correctly.
Choose the right smoke alarm
All Smartwares smoke alarms are equipped with optical sensors.
An optical sensor responds quickly to a glowing fire, triggers significantly fewer false alarms, and is environmentally friendly.
The RM520 smoke detector's battery has a 10-year lifespan, so you don't have to worry about replacing it.
The smoke detector has a silence button that can be used to mute a suspected false alarm.
Mounting
To be reliably warned when a fire breaks out, you should install at least one smoke detector on each floor.
It is advisable to mount the smoke detectors in the places you pass when escaping, for example, in the reception hall or stairwell.
Since smoke rises upwards, the smoke detector must always be mounted on the ceiling, which is not a problem with a few screws or a mounting plate.
Smartwares smoke detectors work wirelessly, so you can mount them anywhere in your home.
Thanks to the locking pin, you can mount the smoke detector only when the battery is inserted.
Maintenance
The functionality of the smoke detector may decrease due to dust and dirt.
It is therefore important to wipe the smoke detector with a slightly damp cloth once a month and vacuum it twice a year.
Do not use any cleaning products and do not paint the smoke detector with paint.
Test smoke alarms
You should test your smoke alarm regularly using the test button.
The smoke detector should be tested once in a moment to make sure it works well in case of fire.
When the battery is gradually running out, a short beep will sound to indicate that the battery needs...
EAN: 8711658460154
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
Smoke Alarm RM520
With the Smartwares RM520 smoke detector you can act in time in case of fire.
The smoke detector has an integrated battery that does not need to be replaced.
With the 85 dB loud alarm sound, you can avoid life-threatening situations.
- Protect yourself and your family by acting quickly in case of fire
- The smoke detector has an integrated battery with 10 years lifetime, which does not need to be replaced
- Smoke detector with convenient test button
- A battery warning tells when the battery needs to be changed
- Easy to install and clean
A smoke alarm saves lives
A fire can break out at any time, even when you are asleep.
The toxic gas can cause you to pass out and not wake up.
However, if a fire breaks out, it is important to wake up in time.
A smoke alarm will warn you in time, so you can quickly respond to life-threatening situations.
It should be taken into account that smoke alarms have a maximum lifespan of 10 years.
Therefore, always check the date of your smoke alarm and buy a new device every 10 years.
This is the only way to ensure that your smoke alarms are working correctly.
Choose the right smoke alarm
All Smartwares smoke alarms are equipped with optical sensors.
An optical sensor responds quickly to a glowing fire, triggers significantly fewer false alarms, and is environmentally friendly.
The RM520 smoke detector's battery has a 10-year lifespan, so you don't have to worry about replacing it.
The smoke detector has a silence button that can be used to mute a suspected false alarm.
Mounting
To be reliably warned when a fire breaks out, you should install at least one smoke detector on each floor.
It is advisable to mount the smoke detectors in the places you pass when escaping, for example, in the reception hall or stairwell.
Since smoke rises upwards, the smoke detector must always be mounted on the ceiling, which is not a problem with a few screws or a mounting plate.
Smartwares smoke detectors work wirelessly, so you can mount them anywhere in your home.
Thanks to the locking pin, you can mount the smoke detector only when the battery is inserted.
Maintenance
The functionality of the smoke detector may decrease due to dust and dirt.
It is therefore important to wipe the smoke detector with a slightly damp cloth once a month and vacuum it twice a year.
Do not use any cleaning products and do not paint the smoke detector with paint.
Test smoke alarms
You should test your smoke alarm regularly using the test button.
The smoke detector should be tested once in a moment to make sure it works well in case of fire.
When the battery is gradually running out, a short beep will sound to indicate that the battery needs...
EAN: 8711658460154
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
Comparison of Similar Products
Smartwares RM250 smoke detector allows you to act in time in case of fire.
The sensor of the smoke detector has a service life of 10 years, the supplied battery of 1 year.
With the 85 dB loud alarm sound, you can avoid life-threatening situations.
- Protect yourself and your family by acting quickly in case of fire
- Sensor with 10 years lifetime
- Smoke detector with convenient test button
- A battery warning tells when the battery needs to be changed
- Easy to install and clean
A smoke alarm saves lives
A fire can break out at any time, even when you are asleep.
The toxic gas can cause you to pass out and not wake up.
However, if a fire breaks out, it is important to wake up in time.
A smoke alarm will warn you in time, so you can quickly respond to life-threatening situations.
It should be taken into account that smoke alarms have a maximum lifespan of 10 years.
Therefore, always check the date of your smoke alarm and buy a new device every 10 years.
This is the only way to ensure that your smoke alarms are working correctly.
Choose the right smoke alarm
All Smartwares smoke alarms are equipped with optical sensors.
An optical sensor responds quickly to a glowing fire, triggers significantly fewer false alarms, and is environmentally friendly.
The RM250 smoke detector's battery has a 1-year life span and the sensor lasts for a maximum of 10 years.
The battery warning beeps when the battery needs to be changed.
The smoke detector has a silence button that can be used to silence a suspected false alarm.
Mounting
To be reliably warned when a fire breaks out, you should install at least one smoke detector on each floor.
It is advisable to mount the smoke detectors in the places you pass when escaping, for example, in the reception hall or stairwell.
Since smoke rises upwards, the smoke detector must always be mounted on the ceiling, which is not a problem with a few screws or a mounting plate.
Smartwares smoke detectors work wirelessly, so you can mount them anywhere in your home.
Thanks to the locking pin, you can mount the smoke detector only when the battery is inserted.
Maintenance
The functionality of the smoke detector may decrease due to dust and dirt.
It is therefore important to wipe the smoke detector with a slightly damp cloth once a month and vacuum it twice a year.
Do not use any cleaning products and do not paint the smoke detector with paint.
Test smoke alarms
You should test your smoke alarm regularly using the test button.
The smoke detector should be tested once in a moment to make sure it works well in case of fire.
When the battery power decreases, a short beep will sound to indicate that the battery...
With the Smartwares RM250 smoke alarm, you can act in time in case of fire.
The smoke alarm comes with a 5-year battery.
With the 85 dB loud alarm sound, you can avoid life-threatening situations.
- Protect yourself and your family by acting quickly in case of fire
- Loud alarm with 85 dB
- The smoke detector has a convenient test button
- A battery warning tells when the battery needs to be changed
- Easy to install and clean
A smoke alarm can save lives
A fire can break out at any time, even when you are asleep.
The toxic gas can cause you to pass out and not wake up.
But if a fire breaks out, you should definitely wake up in time.
A smoke alarm will warn you in time, so you can quickly respond to life-threatening situations.
It is important to know that smoke alarms have a maximum life of 10 years after activation due to dust accumulation.
Therefore, always check the date of your smoke alarm and buy a new device every 10 years to ensure proper operation.
Choose the right smoke detector
All Smartwares smoke alarms are equipped with an optical sensor.
An optical sensor responds quickly to a glowing fire, triggers significantly fewer false alarms, and is environmentally friendly.
The RM250 smoke detector's battery has a 5 year life span and the sensor lasts for a maximum of 10 years.
The battery warning beeps when the battery needs to be changed.
The smoke detector has a silence button that can be used to silence false alarms.
Mounting
To be reliably warned when a fire breaks out, you should install at least one smoke alarm on each floor.
It is advisable to mount the smoke detectors in the places you pass when fleeing, e.g. in the hallway or stairwell.
Since smoke rises upward, the smoke detector must always be mounted on the ceiling.
With a few screws or a retaining plate, this is quite simple.
Smartwares smoke alarms work wirelessly, so you can mount them anywhere in your home.
Thanks to the locking pin, you can only mount the smoke alarm when the battery is inserted.
Maintenance
The functionality of the smoke detector may decrease due to dust and dirt.
It is therefore important to wipe the smoke detector with a slightly damp cloth once a month and vacuum it twice a year.
Do not use any cleaning products and do not paint the smoke detector.
Test your smoke detectors
It is important to test your detector regularly using the test button.
The smoke detector should be tested once in a moment to make sure it works well in case of fire.
When the battery power decreases, a short beep will sound to indicate that the battery needs to be replaced.
Scope of supply:
- 4x smoke...
Smartwares RM250 smoke detector allows you to act in time in case of fire.
The sensor of the smoke detector has a service life of 10 years, the included battery of 1 year.
With the 85 dB loud alarm sound, you can avoid life-threatening situations.
- Protect yourself and your family by acting quickly in case of fire
- Sensor with 10 years lifetime
- Smoke detector with convenient test button
- A battery warning tells when the battery needs to be changed
- Easy to install and clean
A smoke alarm saves lives
A fire can break out at any time, even when you are asleep.
The toxic gas can cause you to pass out and not wake up.
However, if a fire breaks out, it is important to wake up in time.
A smoke alarm will warn you in time, so you can quickly respond to life-threatening situations.
It should be taken into account that smoke alarms have a maximum lifespan of 10 years.
Therefore, always check the date of your smoke alarm and buy a new device every 10 years.
This is the only way to ensure that your smoke alarms are working correctly.
Choose the right smoke alarm
All Smartwares smoke alarms are equipped with optical sensors.
An optical sensor responds quickly to a glowing fire, triggers significantly fewer false alarms, and is environmentally friendly.
The RM250 smoke detector's battery has a 1-year life span and the sensor lasts for a maximum of 10 years.
The battery warning beeps when the battery needs to be changed.
The smoke detector has a silence button that can be used to silence a suspected false alarm.
Mounting
To be reliably warned when a fire breaks out, you should install at least one smoke detector on each floor.
It is advisable to mount the smoke detectors in the places you pass when escaping, for example, in the reception hall or stairwell.
Since smoke rises upwards, the smoke detector must always be mounted on the ceiling, which is not a problem with a few screws or a mounting plate.
Smartwares smoke detectors work wirelessly, so you can mount them anywhere in your home.
Thanks to the locking pin, you can mount the smoke detector only when the battery is inserted.
Maintenance
The functionality of the smoke detector may decrease due to dust and dirt.
It is therefore important to wipe the smoke detector with a slightly damp cloth once a month and vacuum it twice a year.
Do not use any cleaning products and do not paint the smoke detector with paint.
Test smoke alarms
You should test your smoke alarm regularly using the test button.
The smoke detector should be tested once in a moment to make sure it works well in case of fire.
When the battery power decreases, a short beep will sound to indicate that the...
The FireAngel FA-6120-INT battery-powered smoke alarm is quick and convenient to install.
The installation material for the optical smoke alarm is included.
Under normal operating conditions, the smoke detector is functional for 10 years.
You should replace the smoke detector after that to ensure continuous protection of your home.
- Battery operated optical smoke detector
- Reduces false alarms
- Large central test button
- Sleep Easy - mutes the beep when the battery is low for 8 hours
- Low battery warning - .beeps. approximately every 40 seconds when battery needs to be replaced
- Loud 85 decibel alarm
- Suitable for recreational vehicles
- Easy installation - mounting hardware included
- Quiet test feature allows discreet testing at lower volume compared to standard alarms
The ST-630 can be equipped with a W2 radio module (optional, see accessories). ST-630s equipped with this accessory can be operated with 2 to 50 units networked together.
Smoke detector has a powerful permanently sealed Panasonic 10-year battery.
- Thermoptek sensor technology: The technically advanced combined thermo-optical detection method ensures fast detection of both smouldering fires and fast-burning flames.
- Wireless interface for mounting the W2 wireless module.
- Includes a non-removable, integrated lithium battery with a 10-year service life under normal operating conditions.
- Two additional thermal sensors.
- Integrated, readable event memory.
- Self-monitoring with fault indicator.
- Separate yellow fault LED.
- Optional anti-theft protection.
- Easy to set up a wireless connection.
The FireAngel FA-6115-INT optical smoke alarm with replaceable batteries was developed specifically for private households in Germany and Europe.
The slim and modern design can be discreetly integrated into your home.
Thus, the low-profile smoke detector provides complete protection without compromising the style of your interior design.
- Battery operated optical smoke detector
- Reduces false alarms
- Large central test button
- Sleep Easy - mutes the beep when the battery is low for 8 hours
- Low battery warning - .beeps. approximately every 40 seconds when battery needs to be replaced
- Loud 85 decibel alarm
- Suitable for recreational vehicles
- Easy installation - mounting hardware included
- Quiet test feature allows discreet testing at lower volume compared to standard alarms
The FireAngel FA-6111-INT optical smoke alarm with flood light has replaceable batteries that last approximately 3 years.
In case of emergency, the smoke alarm alerts all occupants in time so that there is enough time to get to safety.
With the LED escape light, corridors and escape routes are illuminated for better orientation in the event of an alarm.
- Escape light- an extra bright light to illuminate the escape route.
- Battery operated optical smoke detector
- Reduces false alarms
- Large central test button
- Sleep Easy - mutes the beep for 8 hours when the battery is low
- Low battery warning - ''beeps'' approximately every 40 seconds when battery needs to be replaced
- Loud 85 decibel alarm
- Suitable for recreational accommodation vehicles
- Easy installation - mounting hardware included
- Quiet test function supports discreet testing at lower volume compared to standard alarms
Alarm also features a loud 85 dB alarm, easy mounting bracket, a single test/silence button, and an end-of-life signal so you know when to replace the battery.
For maximum protection and the ultimate in assurance, you can depend on Logilink's smoke detector to secure what matters most in life.
- Detects smoke and sends an loud 85 dB alarm
- Ceiling or wall mounting
- Button for easy function test and muting
- With EN14604 approval
- Built-in lithium battery, 10 year battery
- Maximum protection and highest safety
- Sensor type: photoelectric
- Comes with silent mode that allows you to avoid false alarms from cooking or steamy showers
- Highly accurate & responsive
- LED indicator
- Color: White
- Q-label certified (VdS 3131)
- For installation according to DIN 14676
- LED display for alarm, malfunction and muting
- Integrated battery for 10 years operation
The tiny ''Invisible'' series detectors are no bigger than a golf ball and offer amazingly good values. The smoke detector carries the coveted Q label (VdS3131). Unique is also the extremely beautiful design, which is restrained
but tastefully integrated into the living ambience.
- easy installation through ''Smart Clip Technology
- Multi-function button for detector test and muting
- with integrated 10-year battery
- 30 day battery change signal
More than 500 people in Germany die every year from the consequences of a fire, 95% of them from toxic smoke. Most fires are caused by technical defects such as cable fire. Since the sense of smell also sleeps at night, most people only wake up when thick smoke makes orientation difficult and people affected cannot get to safety in time. Toxic flue gases lead to loss of consciousness after three breaths and to death within a short time.
The ABUS photoelectric smoke detector is characterized by its very compact design. It detects even the smallest smoke particles and warns residents early and effectively against a fire that is developing with a loud alarm. The detection range of the smoke detector is up to 40 m² and is limited to the room in which it is mounted.
Important notes on installation and battery life
In apartments, dormitories and children's rooms, as well as corridors leading through the emergency routes of public rooms, must each have at least one smoke alarm. The smoke detectors must be installed (or installed) and operated in such a way that smoke is detected and reported at an early stage. A fixed 3 V lithium battery guarantees reliable function and long service life of the smoke alarm. The proper functioning of the detector should be checked regularly by pressing the test button. Malfunctions or a weak battery are signaled acoustically and visually.
- Recommended locations: Bedrooms, living rooms, children's rooms and hallways
- Quality tested according to Q (vfdb 14/01)
- 10 years battery life - warns if the battery is weak
- 3 V lithium battery, permanently installed
- Reliably warns against the development of life-threatening smoke
- Large-area test button for manual self-test and test alarm
- Compact design and attractive design
Includes:
- Mini Smoke Alarm 10 Years
- Battery (lithium, permanently installed)
- Operating Instructions
You want security at home. The Alecto SD1010 monitors your home around the clock and warns you immediately with a clear 85 dB alarm as soon as it detects smoke. The integrated lithium battery lasts for 10 years. Battery changes are not necessary. The detector can be fitted in just a few minutes. So you are protected on every floor for years without any worries.
- 10 year battery life
- Alarm signal = 85 dB
- Photoelectric sensor
- Test button, mute function and timeout function
- Low battery warning
- Flexible mounting. Screw or magnetic, for example with the Alecto MK-2
- Complies with EN14604:2005/AC:2008
- Compact size
10 years carefree
The battery lasts 10 years. No need to change batteries. The detector reports a low battery level in good time. So you stay protected.
Fast detection and loud alarm
The photoelectric sensor reacts quickly to smoke, especially in slow-smouldering fires. The alarm reaches a sound pressure level of 85 dB(A). This is loud enough to wake you through closed doors and even when you are asleep. As soon as the smoke has disappeared, the alarm stops automatically.
Simply test and temporarily mute
Use the test button to check the function. The mute function temporarily suppresses an unwanted alarm, for example due to cooking fumes. The detector then automatically switches back to standby mode.
Reliable quality
The SD1010 complies with EN14604:2005/AC:2008, the European standard for smoke detectors. You choose verifiable safety and performance.
Scope of delivery:
- Alecto SD1010 smoke detector with built-in battery
- Mounting plate
- 2 screws and plugs
- Operating instructions NL, EN, DE, FR, ES
- Universal manual
- Smoke detector with long-life battery
- Base compatible with HDv Sensys
Maximum safety through professional quality!
Finally it is here: the new Sensys-2 smoke detector.
Elegant in design and base-compatible with one of the most widely installed smoke detectors in the past ten years (HDv Sensys).
Sensys-2 is of course VdS-certified and carries the coveted Q-label.
For this, smoke alarms must undergo the most demanding additional tests with strict quality criteria in long-term operation.
This ensures trouble-free operation over the entire 10-year service life.
- 10 years power supply (from commissioning)
- VdS additional test for long-term operation - Q-Label certified
- Large multifunction button for test and mute function
- Auto-activation during initial installation
- LED only in fault or alarm mode (no disturbance of night sleep)
- Base compatible with smoke detector HDv Sensys (Datecode: 02/2011-08/2021)
Sensys smoke detectors are preferably used in the housing industry for mounting according to DIN 14676.
The standard-compliant installation is carried out with screws and plugs or with a special adhesive pad (accessories).
For the mandatory replacement of already installed HDv Sensys smoke detectors (after ten years), no new drilling or screwing is required.
The new Sensys smoke detector is simply screwed into the mounting base supplied or into the one already installed and is immediately ready for operation.
Package contents:
- 1x smoke detector
- 1x set of mounting materials (screws, dowels and mounting base)
Elegant wireless and very easy to network photoelectric smoke detector with 10-year warranty and battery life developed for installation in private homes.
This detector can be connected with other detectors of the CAVIUS wireless alarm family or act as a stand-alone detector.
Battery type
2 x Lithium 3V CR 123A
Lifetime device max.
10 years
Typical battery life
10 years
max. monitoring area per detector
60m²
Radio range in buildings
max. 10m
Networking
max. 32
max. room height
6 m
dimensions (Ø x H)
Ø 78 x 41 mm
Operating temperature
+4°C to +38°C
Application areas
- apartments
- habitable vehicles
Function
Test/Hush
Certification
EN 14604:2005 + AC:2008, EN60065, RED, RoHS, REACH
- Tamperproof, sealed ten-year lithium battery
- Sensor service life: ten years
- Quick and easy to install
- Wireless networking with W2 wireless components such as smoke detectors, CO detectors, heat detectors or FireAngel Connect (W2 wireless module not included, order separately: FIREANGEL W2)
- Compatible with FireAngel W2 wireless module, Z-Wave or ZigBee module (W2 wireless module not included, order separately: FIREANGEL W2)
- Particularly resistant to household loads
- End-of-life display for when the detector operating life ends
in ppm = parts per million
- 50 ppm resolution after 60 - 90 minutes
- 100 ppm resolution after 10 - 40 minutes
- 300 ppm resolution < 3 minutes
- Protect your home from fire
- Control via an existing Wi-Fi network with the free Smart Life or Megos Smart Home app
- Tuya compatible
- Responds with a loud alarm and sends a notification via the app
- LED display
- Mounted on the ceiling or wall
- 5-year battery (replaceable)
- Silent mode to avoid false alarms caused by cooking or a steaming shower
- System requirements: Android 5 or higher / iOS 11 or higher
- Color: White
Design your smart home! This smoke detector detects both slow and fast burning fires and sends a loud 85 dB alarm as well as a notification via the app.
Scope of delivery:
- 1x smoke detector
- 1x 3 V battery
- 3x plastic dowels
- 3x screws
- 1x user manual
Smoke detectors are not able to either prevent the outbreak of fire or to extinguish it. They are designed to give you adequate warning of fatal smoke, which develops during a fire, and to give you sufficient time to escape.
SENSOR TYPE
The Cautiex smoke detector is a photoelectric smoke detector based on infrared technology. Radioactivity is not used to detect smoke, which makes this device environmentally friendly.
The Cautiex smoke detector cannot detect either heat or fire.
In order to reliably detect smoke, the smoke from the fire must be able to reach the sensor chamber in the Cautiex smoke detector.
BATTERY TYPE
• CR2 3-V lithium battery/850 mAh (changeable)
The smoke detector is equipped with a CR2 3-V lithium battery, which is designed to power the smoke detector for five years. In order to prevent malfunctions NEVER use any other battery type.
Smoke detector from LogiLink detects smoke and sends an alarm signal. Suitable for ceiling or wall mounting, a test button for testing the function and a low battery signal.
In the event of an alarm, a loud alarm signal sounds at 85 dB. Thanks to the 10-year service life, you no longer need to worry about changing the battery.
- Detects smoke and emits a loud acoustic alarm signal
- Suitable for ceiling or wall mounting
- Button for easy function test
- LED signal when battery is low
- Very loud alarm signal: 85db at a distance of 3m
- With VdS approval G218052
- Built-in 3V lithium battery
Note: Due to the design, there is no suitable magnetic holder for this smoke detector
- 1 warning detector against 2 deadly hazards:
- advanced optical smoke sensor to minimize false alarms
- innovative electrochemical carbon monoxide sensor for better detection of CO, both sensors work independently of each other
- loud alarm generator 85 dB-A
- Sealed 3V lithium battery with 10 year lifetime
- large test & mute button
The FireAngel FA-SCB10-INT Combined Smoke & Carbon Monoxide Alarm is an easy-to-install combination detector designed to protect occupants from fire and CO.
It is ideal for protection in bedrooms and living areas.
The device has both smoke and carbon monoxide sensors to detect both hazards.
It has clear indicators and warnings so you can see which hazard is acute when the alarm sounds.
The smoke & carbon monoxide detector has a sealed 3V lithium battery with a 10 year life.
- Dimension: 134mm (diameter) x 39.4mm depth
- Battery: Sealed 3V lithium battery 10 years lifetime
- Technology: Optical (smoke), electrochemical (carbon monoxide- CO)
- Alarm sound level: 85dB(A) at 3m (minimum)
- Installation: ceiling/wall
- Operating temperature: 0°C to +40°C
- Material: ABS, UL94 VO fire retardant
- Manufacturer warranty: 3 years
- Weight: 0,200 kg
- Certified according to: EN14604:2005+AC:2008 / EN 50291-1:2018
- 10-year lithium battery
- reliable protection with status flashing
- Muting of a fault message for up to 10 hours
- automatic activation during assembly
Technical data:
- loud alarm 85 dB-A
- optical alarm display Alarm LED red
- Self-monitoring and fault indication
- diameter 85 mm, height 35 mm
- Application area according to DIN 14676 / Detector type A
- EN 14604 tested and certified
- construction product according to Construction Products Directive 0086-CPR-624017
- ANSMANN premium quality lithium battery long-life, specially developed for use in smoke detectors
- for all conventional, battery-operated smoke detectors
- tested by the Saarland TÜV centre (function, quality, durability)
- up to 700% more power in comparison with an alkaline battery
- mercury and cadmium free
- can be stored: 10 years minimum
- can also be used in extreme temperatures from +60°C to -40°C
- the smoke detector batteries are around 35% lighter than normal alkaline 9V PP3 batteries
- very low self-discharge, only ca. 2% per year
Features
The 85-dB siren is loud enough to wake you
Batteries are included, so get started right after unboxing this product!
Package contents
- Smoke detector with mount
- Installation material
- 9-V battery
- Quick start guide
- Alert to your smartphone in case of smoke or low battery wherever you are as long as you are connected to the Zigbee gateway (Wi-FiZBxxx)
- Combination with other Nedis® SmartLife products to create other smart automatic sequences (e.g. turn on lights when smoke is detected)
- compact size of only 43 x 43 mm (without base) and thus 75% smaller than most other detectors
- high quality sensor with a lifetime of up to 10 years
- the included lithium battery lasts up to 5 years before it needs to be replaced
This compact Zigbee smoke detector from Nedis alerts you to smoke by sounding a loud alarm to people nearby and sending an alert to your smartphone no matter where you are.
With its compact size of 43 x 43 mm (without base), it is 75% smaller than most detectors and can be mounted discreetly. Yet it is large enough to accommodate a powerful sensor with a 10-year lifespan and an 85-decibel alarm that warns at the earliest stage of a fire.
The smoke detector is very easy to mount, either with the included double-sided adhesive pad or the included screws. The included lithium battery will last 5 years before needing to be replaced. It also sends a reminder to your smartphone.
Install this smoke detector in the free Nedis SmartLife app by connecting it wirelessly to your Zigbee gateway (Wi-FiZBxxx). For additional security features, the device can easily be combined with other SmartLife products. This could be, for example, turning on your smart lights when smoke is detected to allow safe exit from the hazardous area.
About Nedis SmartLife
Discover a wide and ever-expanding range of products - such as light bulbs, switches, sockets, sensors and cameras - all of which can be controlled via a user-friendly and intuitive app. Whether you're looking for a single smart light bulb or outlet, or want to automate your entire home, discover how easy smart technology is today.
GLORIA smoke detector type R-10 according to EN14604:2005 for apartments.
- 10 years service life due to permanently installed 3V lithium quality battery.
- Certified quality, with Q-label!
- Use for apartments, residential houses and rooms with apartment-like use
- Use in habitable vehicles (caravans/motor homes) possible
- Discreet and compact design
- Reliable and robust design very reliable smoke detection.
- Red LED signals readiness for operation
- Additional memory for reading out important events (e.g. alarm, faults, self-tests)
- Easy-to-use multifunction button for detector test and alarm stop for temporary muting of unwanted alarms (HUSH® function)
- Convenient activation of the sensor by locking the detector on the mounting base
- With mounting material (screws and dowels) Operating and mounting instructions
- Fault indication when contamination threshold** is reached
- warning tone: 85dBA/3m
- Ø approx. 10.5cm, height approx. 3.8cm, weight: approx. 180g
Certification:
- VdS 3131
- vfdb 14/01
- EN14604:2005 + AC: 2008 / Annex L
- VDS recognition: G211064
Scope of delivery:
- Smoke detector
- Mounting material
- Operating and mounting instructions
Provide power and data to a Powered Device (PD) using the existing Cat5 cable and this PoE injector.
The Intellinet Network Solutions Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at compliant product to a non-PoE LAN switch port. The PoE injector can establish and provide a network connection to a wireless access point, an IP phone, a network camera or any IEEE 802.3af/at-powered PD. This injector has an output power of up to 30 watts. This is also sufficient for power-hungry PoE devices.
Reduce the cost of cabling
There's no need to run AC power lines to get your PD set up and ready to do what it's supposed to do. Simply connect the PoE Injector to the LAN switch port and use the existing Cat5 cabling to deliver both DC power and transmission data.
Protect your equipment
Once the DC power supply is connected to your networked devices via the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power issues such as short circuits (short circuit GND), overloads and high voltages.
Features:
- Saves time and money by providing data and power over existing network cables.
- IEEE 802.3at compliant (PoE+)
- Power output up to 30 watts
- Distance support: up to 100 m (328 ft.)
- Supports all IEEE 802.3at and IEEE 802.3af compliant PoE devices (wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) phones, IP surveillance cameras and more).
- Supports IEEE 802.3at/af detection and short circuit, overload and high voltage protection.
- Internal power supply
- Fanless design, ideal for silent operation
Scope of delivery
- Gigabit high-performance PoE+ injector with high performance
- power cable
- instructions
- The new Q2 smoke detector from world market leader Kidde with a 10-year manufacturer warranty (US product liability) is VdS-certified and carries the coveted Q label for sustained operation — proven in demanding additional tests. New features include an event memory and contamination compensation, which reduces nuisance alarms to a bare minimum by automatically adjusting the sensitivity of the sensor.
These quality criteria ensure that the microprocessor-controlled Q2 smoke detector provides fault-free operation over the entire 10-year period.
- Q label certified
- Compact, discreet and unobtrusive
- Multi-function button for low-noise detector test and alarm stop
- Automatic detector activation during initial assembly
- Includes anti-tamper protection
- Sensor Type: Electrochemical
- Alarm Type: CO alarm, fault alarm, low battery warning
- Alarm Volume: Over 85dB (A) at 3 m (9.84 ft)
- Alarm Mode: Visual and audible alarm
- Power source: 3V CR123A lithium battery (replaceable)
- Indoor use only
Dahua Wisualarm Standalone Carbon Monoxide Alarm is designed to continuously monitor Carbon Monoxide concentration.
Adopting advanced electrical technology, a built-in high-volume buzzer, it responds quickly and becomes highly sensitive with stable performance and low false alarm.
Once the surrounding Carbon Monoxide concentration reaches the alarm value, it will promptly send out an audible and visual alarm signal to remind the user to take immediate measures.
- The 85-dB siren is loud enough to wake you
- Batteries are included, so get started right after unboxing this product!
Package contents
- Heat detector
- 9-V battery
- Mounting materials
- Manual
- Optoelectronic sensor
- White (RAL 9003)
- 10 years battery life
The Wiser Smarter Smoke Detector (device) uses a photoelectric sensor to detect smoke generated by a fire.
It also has a temperature sensor that detects heat by a rapid rise in temperature.
When the device is connected to the -system, it sends the notifications through the Wiser app.
The Alecto SD110 combines simple installation with proven safety. In the event of smoke, an 85 dB alarm sounds and thanks to the photoelectric sensor, the detector reacts quickly and accurately. The detector has a lifespan of 10 years and uses a replaceable 9V battery.
- Fast warning in the event of smoke and fire
- 10-year service life
- Very loud alarm & 85 dB
- Test button
- Low battery indicator
- High quality: Complies with EN14604:2005/AC:2008
- Mounting material included
- Battery operated (1x 9V per unit, included)
Fast warning
The photoelectric sensor reacts quickly to visible smoke. Slowly smouldering fires are also detected early. This saves you time for evacuation.
Ease of use and test
Use the test button to check the function. A weekly test is recommended. The SD110 gives a clear warning when the battery charge is low.
Reliable quality
The SD110 complies with EN14604:2005/AC:2008, the European standard for smoke detectors. You choose demonstrable safety and consistent performance.
Simple installation
Attach the detector securely to the ceiling or wall. Mounting material is included. The detector is suitable for ceiling mounting in living spaces.
Scope of delivery:
- 3x Alecto SD110 smoke detector
- 3× 9V battery
- Mounting plates
- Screws and wall plugs
- manual
The Alecto SD110 combines simple installation with proven safety. In the event of smoke, an 85 dB alarm sounds and thanks to the photoelectric sensor, the detector reacts quickly and accurately. The detector has a lifespan of 10 years and uses a replaceable 9V battery.
- Fast warning in the event of smoke and fire
- 10-year service life
- Very loud alarm & 85 dB
- Test button
- Low battery indicator
- High quality: Complies with EN14604:2005/AC:2008
- Mounting material included
- Battery operated (1x 9V per unit, included)
Fast warning
The photoelectric sensor reacts quickly to visible smoke. Slowly smouldering fires are also detected early. This saves you time for evacuation.
Ease of use and test
Use the test button to check the function. A weekly test is recommended. The SD110 gives a clear warning when the battery charge is low.
Reliable quality
The SD110 complies with EN14604:2005/AC:2008, the European standard for smoke detectors. You choose demonstrable safety and consistent performance.
Simple installation
Attach the detector securely to the ceiling or wall. Mounting material is included. The detector is suitable for ceiling mounting in living spaces.
Scope of delivery:
- Alecto SD110 smoke detector
- 1× 9V battery
- Mounting plate
- Screws and wall plugs
- manual
The Alecto SD110 combines simple installation with proven safety. In the event of smoke, an 85 dB alarm sounds and thanks to the photoelectric sensor, the detector reacts quickly and accurately. The detector has a lifespan of 10 years and uses a replaceable 9V battery.
- Fast warning in the event of smoke and fire
- 10-year service life
- Very loud alarm & 85 dB
- Test button
- Low battery indicator
- High quality: Complies with EN14604:2005/AC:2008
- Mounting material included
- Battery operated (1x 9V per unit, included)
Fast warning
The photoelectric sensor reacts quickly to visible smoke. Slowly smouldering fires are also detected early. This saves you time for evacuation.
Ease of use and test
Use the test button to check the function. A weekly test is recommended. The SD110 gives a clear warning when the battery charge is low.
Reliable quality
The SD110 complies with EN14604:2005/AC:2008, the European standard for smoke detectors. You choose demonstrable safety and consistent performance.
Simple installation
Attach the detector securely to the ceiling or wall. Mounting material is included. The detector is suitable for ceiling mounting in living spaces.
Scope of delivery:
- 2x Alecto SD110 smoke detector
- 2× 9V battery
- Mounting plates
- Screws and wall plugs
- manual
The Alecto SD110 combines simple installation with proven safety. In the event of smoke, an 85 dB alarm sounds and thanks to the photoelectric sensor, the detector reacts quickly and accurately. The detector has a lifespan of 10 years and uses a replaceable 9V battery.
- Fast warning in the event of smoke and fire
- 10-year service life
- Very loud alarm & 85 dB
- Test button
- Low battery indicator
- High quality: Complies with EN14604:2005/AC:2008
- Mounting material included
- Battery operated (1x 9V per unit, included)
Fast warning
The photoelectric sensor reacts quickly to visible smoke. Slowly smouldering fires are also detected early. This saves you time for evacuation.
Ease of use and test
Use the test button to check the function. A weekly test is recommended. The SD110 gives a clear warning when the battery charge is low.
Reliable quality
The SD110 complies with EN14604:2005/AC:2008, the European standard for smoke detectors. You choose demonstrable safety and consistent performance.
Simple installation
Attach the detector securely to the ceiling or wall. Mounting material is included. The detector is suitable for ceiling mounting in living spaces.
Scope of delivery:
- 5x Alecto SD110 smoke detector
- 5× 9V battery
- Mounting plates
- Screws and wall plugs
- manual
CAVIUS is building on its expertise to move into the world of wireless technology, with a new smoke detector specifically designed to meet the needs of modern families in terms of safety at home. Your entire house is now under control. Its 65-mm enclosure contains an optical smoke detector with 5-year battery and wireless connection, which can be connected to other sensors in the Cavius wireless alarm family within the same cluster of homes.
The large and easily accessible test key allows you to check the penetrating sound of the alarm (volume of 85 dB (A)) from a distance of 3 metres, or activate a 10-minute pause function.
- Micro-design: only 65 mm in diameter
- Wireless networking of max. 32 detectors
- Easy networking thanks to plug and play function
- Detector test with mute by remote control
- With integrated 3 V lithium battery for up to 5 years operation without a battery change
Particularly suitable for larger residential units. For fast and secure alarms, no matter where the fire starts.
Recommended for monitoring rooms used by children or patients.
- Safety standard: EN 14604:2005+AC:2008
- Sensor type: photoelectric
- Operating life: 10 years
- Power supply: 3-V CR123A lithium battery (not replaceable)
- Standby current: < 6 µA (average)
- Alarm current: < 30 mA
- Alarm volume: >= 85 dB at 10 ft (3 m)
- Operating temperature and humidity: 4.4 - 37.8°C, >= 85% RH (non-condensing)
- Mute duration: <= 9 minutes
- Indicator light: red LED
- Product weight: 91 g
- Product dimensions: 78 x 78 x 48 mm
Included in delivery:
- 1x alarm device
- 1x mounting bracket
- 2x screws
- 2x dowels
- 1x user manual
They also convince by the following features:
- Photoelectric detector, tested according to EN 14604
- Optical display of the function, with test button for functional testing
- Penetrating alarm signal 85 dB
- Low battery signal tone
- Penetrating alarm signal 85 dB
- 9 V block battery included
Alarm also features a loud 85 dB alarm, easy mounting bracket, a single test/silence button, and an end-of-life signal so you know when to replace the battery.
For maximum protection and the ultimate in assurance, you can depend on Logilink's smoke detector to secure what matters most in life.
- Detects smoke and sends an loud 85 dB alarm
- Ceiling or wall mounting
- Button for easy function test and muting
- With EN14604 approval
- Built-in replaceable 9 V carbon zinc battery, 1 year battery
- Maximum protection and highest safety
- Sensor type: photoelectric
- Comes with silent mode that allows you to avoid false alarms from cooking or steamy showers
- Highly accurate & responsive
- LED indicator
- Color: White
- GLORIA R-5 smoke detector according to EN14604 for homes and according to Annex L also for habitable vehicles.
- Optical smoke detector with replaceable 9V-alkaline block battery.
- Convenient function check using a rocker button for alarm checks and mute for temporary suppression in the event of unwanted alarms (HUSH® function).
- Red LED indicates periodic battery self-test and function test.
- Discreet, compact and robust design - very reliable smoke detection.
- Convenient activation of the sensor by locking the detector on the mounting base.
- With mounting material, operating and installation instructions.
- Warning tone: 85 dBA/3 m
- 3 V lithium battery permanently installed in the device for constant functional reliability
- Increased stability, e.g. against external influences
- Quality seal ''Q'' - smoke alarm device fulfills the increased requirements of vfdb guideline 14-01
- VdS tested in accordance with DIN EN 14604
- Penetrating alarm signal 85 dB
- Visual and acoustic signal when the battery is low
- Includes mute function in the event of a false alarm and ''do not disturb'' function when the battery is low
- Visual display of function, with test button for function test
