SHARP PC817X1NSZ1B - Optocouplers, 5kV, 80V, 4..8mA, >80%, DIP-4
10.31 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
"Optocoupler with transistor output
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"Optocoupler with transistor output
- 4 µs rise time
- 3 µs waste time
- RL: 100 ohms
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
LITEON LTV 826 - Dual optocoupler, 5kV, 80V, 50mA, 50-600%, DIP-8
10.31 EUR
Features:• Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Dual-in-line package :
- LTV-816 : 1-channel type
- LTV-826 : 2-channel type
- LTV-846 : 4-channel type
• Safety approval
UL 1577
VDE DIN EN60747-5-5 (VDE 0884-5)
CSA CA5A
CQC GB4943.1-2011/ GB8898-2011 (meet Altitude up to 5000m)
Nordic Safety ( FIMKO/NEMKO/SEMKO/DEMKO)
BSI
• RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
• ESD pass HBM 8000V/MM2000V
LITEON LTV 825 - Dual optocoupler, 5kV, 35V, 80mA, 600-7500%, DIP-8
10.37 EUR
Features: • High current transfer ratio
( CTR : MIN. 50% bei IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5.000Vrms )
• Response time
( tr : TYP. 4µs bei VCE = 2V, IC = 2mA, RL = 100R )
• Dual-in-line package :
- LTV-815 : 1-channel-type
- LTV-825 : 2-channel-type
- LTV-845 : 4-channel-type
• Safety approval
• UL approved ( No. E113898 )
• TUV approved ( No. R9653630 )
• CSA approved ( No. CA91533-1 )
• FIMKO approved ( No. 193422-01 )
• NEMKO approved ( No. P96103013 )
• DEMKO approved ( No. 303986 )
• SEMKO approved ( No. 9646047 / 01-30 )
• VDE approved ( No. 094722 )
VISHAY CNY 17-4 VIS - Optocoupler, 5 kV, 70 V, 60 mA, 160-320%, DIP-6
10.41 EUR
Good long-term stability
LITEON LTV 827 - Dual optocoupler, 5kV, 35V, 50mA, 50-600%, DIP-8
10.17 EUR
"Features:• Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Dual-in-line package :
- LTV-817 : 1-channel type
- LTV-827 : 2-channel type
- LTV-847 : 4-channel type
• Safety approval
UL / CSA / FIMKO / NEMKO / DEMKO / SEMKO / VDE* approved *Required ""V"" ordering option"
LITEON LTV 815 - 1-fold optocoupler, 5 kV, 35 V, 80 mA, 600-7500 %, DIP-4
10.17 EUR
Features: • High current transfer ratio
( CTR : MIN. 50% bei IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5.000Vrms )
• Response time
( tr : TYP. 4µs bei VCE = 2V, IC = 2mA, RL = 100R )
• Dual-in-line package :
- LTV-815 : 1-channel-type
- LTV-825 : 2-channel-type
- LTV-845 : 4-channel-type
• Safety approval
• UL approved ( No. E113898 )
• TUV approved ( No. R9653630 )
• CSA approved ( No. CA91533-1 )
• FIMKO approved ( No. 193422-01 )
• NEMKO approved ( No. P96103013 )
• DEMKO approved ( No. 303986 )
• SEMKO approved ( No. 9646047 / 01-30 )
• VDE approved ( No. 094722 )
FREI 4N 38A - Optocoupler, 2.5kV, 80V, 50mA, DIP-6
10.2 EUR
Typ. forward voltage: 1.3 VTyp. forward current: 10 mA
Max. forward voltage: 1.5 V
CTR: 20%
SHARP PC 3H4J00000F - Photocoupler, AC 2.5 kV 80 V >20% MFP4 half-pitch
10.39 EUR
AC-input photocouplerAC 2.5 kV 80 V >20% MFP4
Mini-flat half-pitch package.
The PC3H4J00000F series contains an IRED optically coupled to a phototransistor. It is packaged in a 4-pin mini-flat, half-pitch type. The input-output isolation voltage (rms) is 2.5 kV. The collector-emitter voltage is 80 V and the CTR is 20% to
400% at an input current of 1 mA.
EVERLIGHT EL 817S1(A)(TU) - 1-fold optocoupler, 5kV, 35V, 50mA, 80-160%, SMD-4
10.17 EUR
EL817 , 4 PIN SMD Phototransistor Photocoupler Description:
The EL817 series of devices each consist of an infrared emitting diodes, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.
Features:
• Current transfer ratio (CTR: 50~600% @ IF = 5mA, Vce = 5V)
- EL817 : 50 - 600
- EL817A : 80 - 160
- EL817B : 130 - 260
- EL817C : 200 - 400
- EL817D : 300 - 600
- EL817X : 100 - 200
- EL817Y : 150 - 300
• High isolation voltage between input and output (Viso = 5000Vrms )
• Creepage distance > 7.62mm
• Operating temperature up to +110°C
• Compact small outline package
• Compliance with EU REACH.
• The product itself will remain within RoHS compliant version
• UL and cUL approved(No.E214129)
• VDE approved (No.132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CQC approved
Application:
• Programmable controllers
• System appliances, measuring instruments
• Telecommunication equipments
• Home appliances, such as fan heaters, etc.
• Signal transmission between circuits of different potentials and impedances
FREI LTV 846 - Quad optocoupler, 5kV, 80V, 50mA, 50-600%, DIP-16
10.5 EUR
Features:• Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Dip package :
- LTV-816 : 1-channel type
- LTV-826 : 2-channel type
- LTV-846 : 4-channel type
• Safety approval
UL 1577
VDE DIN EN60747-5-5 (VDE 0884-5)
CSA CA5A
CQC GB4943.1-2011/ GB8898-2011 (meet Altitude up to 5000m)
Nordic Safety ( FIMKO/NEMKO/SEMKO/DEMKO)
BSI
• RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
• ESD pass HBM 8000V/MM2000V
MSL class1
VISHAY SFH 615A-2 - Optocoupler, phototransistor output, 5.3 KV, CTR 63-125%, DIP-4
10.21 EUR
DescriptionThe SFH615A (DIP) and SFH6156 (SMD) feature a variety of transfer ratios, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and
is incorporated in a plastic DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation
up to an operation voltage of 400 VRMS or DC.
Specifications subject to change.
Features
• Excellent CTR Linearity Depending on Forward Current
• Isolation Test Voltage, 5300 VRMS
• Fast Switching Times
• Low CTR Degradation
• Low Coupling Capacitance
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J, Double Protection
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
• Switchmode power supply
• Telecom
• Battery powered equipment
LITEON LTV 826S - Dual optocoupler, 5kV, 80V, 50mA, 50-600%, SMD-8
10.21 EUR
Features:• Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Surface mounting package :
- LTV-816S : 1-channel type
- LTV-826S : 2-channel type
- LTV-846S : 4-channel type
• Safety approval
UL 1577
VDE DIN EN60747-5-5 (VDE 0884-5)
CSA CA5A
CQC GB4943.1-2011/ GB8898-2011 (meet Altitude up to 5000m)
Nordic Safety ( FIMKO/NEMKO/SEMKO/DEMKO)
BSI
• RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
• ESD pass HBM 8000V/MM2000V
LITEON LTV 816 - Single optocoupler, 5kV, 80V, 50mA, 50-600%, DIP-4
10.11 EUR
Features:• Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Dual-in-line package :
- LTV-816 : 1-channel type
- LTV-826 : 2-channel type
- LTV-846 : 4-channel type
• Safety approval
UL 1577
VDE DIN EN60747-5-5 (VDE 0884-5)
CSA CA5A
CQC GB4943.1-2011/ GB8898-2011 (meet Altitude up to 5000m)
Nordic Safety ( FIMKO/NEMKO/SEMKO/DEMKO)
BSI
• RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
• ESD pass HBM 8000V/MM2000V
ISOCOM COMPONENTS PC 849H - Optocoupler, 4x 5kV 35 V 50 mA >50% DIP16
12.79 EUR
ISOCOM DC optocouplers With transistor output
SHARP PR36MF22NSZH - SSR+ZCD, 4 kV, 600 V, 0.6A, 5 mA, DIP8
11.66 EUR
Solid-state relays (SSR) consist of an infrared emission diode (IRED), a phototriac detector and a main triac output. Ideal for controlling high-voltage alternating current loads with solid-state reliability, these devices provide 4.0 kV (Viso(rms)) isolation from input to output.IT(rms).0.6 A, zero cross type
DIP 8-pin
Triac output SSR
LITEON LTV 846S - Quad optocoupler, 5kV, 80V, 50mA, 50-600%, SMD-16
10.59 EUR
Features:• Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Surface mounting package :
- LTV-816S : 1-channel type
- LTV-826S : 2-channel type
- LTV-846S : 4-channel type
• Safety approval
UL 1577
VDE DIN EN60747-5-5 (VDE 0884-5)
CSA CA5A
CQC GB4943.1-2011/ GB8898-2011 (meet Altitude up to 5000m)
Nordic Safety ( FIMKO/NEMKO/SEMKO/DEMKO)
BSI
• RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
• ESD pass HBM 8000V/MM2000V
MSL class1
LITEON LTV 824S - Dual optocoupler-AC, 5kV, 35V, 50mA, 20-300%, SMD-8
10.44 EUR
Features:• Current transfer ratio
( CTR : MIN. 20% at IF = ±1mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Surface mounting package :
- LTV-814S : 1-channel type
- LTV-824S : 2-channel type
- LTV-844S : 4-channel type
• Safety approval
UL 1577
VDE DIN EN60747-5-5 (VDE 0884-5)
CSA CA5A
Nordic Safety ( FIMKO/NEMKO/SEMKO/DEMKO)
• BSI RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
• ESD pass HBM 8000V/MM2000V
• MSL class1
LITEON LTV 827-C - 2-fold optocoupler, 5kV, 35V, 50mA, 200-400 %, DIP-8
10.16 EUR
"- Typ. Vorwärtsspannung: 1,2 V
- Typ. Vorwärtsstrom: 20 mA
- Max. Vorwärtsspannung: 1,4 V
- Max. Vorwärtsstrom: 50 mA
- Collector-Emitter-Spannung: 35 V
- Collector-Strom: 50 mA
- Isolationsspannung I/O: 5000 V
- CTR: 200 - 400 %
VISHAY SFH 620A-3 - Optocoupler, phototransistor output, 5.3 KV, CTR 100-320%, DIP-4
10.43 EUR
"Optocoupler, Phototransistor Output, AC InputDescription
The SFH620A (DIP) and SFH6206 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 or SMD package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation to an operation voltage of 400 VRMS or DC.
Features
• Good CTR linearity depending on forward current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End-stackable, 0.100"" (2.54 mm) spacing
• High common-mode interference immunity
Approvals
The safety application model number covering all products in this datasheet is SFH620A and SHF6206. This model number should be used when consulting safety agency documents.
• UL1577, file no. E52744 system code H, double protection
• CSA 93751
• BSI EN 60950, EN 60065
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• CQC GB8898-2011, GB4943.1-2011"
TELEFUNKEN TFK CQY80 - Optocoupler, 1-channel, Uiso 1.6kV, Uce 32V,DIP-6
10.2 EUR
TECHNOLOGY: PHOTOCOUPLER PHOTOTRANSISTOR NPNDetails: Optocoupler, phototransistor output,
With Base Connection
Forward current: 60 mA
Surge current: 1.5 A.
Shut-off voltage: 5 V.
Power dissipation @ Tamb Collector-emitter voltage: 32 V.
Emitter collector voltage: 5 V.
Insulation test DC voltage: 4 kV
Forward voltage: 1.2 V.
Coupling capacity: 0.3 pF
Collector current: 50 mA
Operating temperature: -55 - 100 °C.
VISHAY SFH 6156-2 - Optocoupler, phototransistor output, 5.3 KV, CTR 63-125%, SMD-4
10.21 EUR
DescriptionThe SFH615A (DIP) and SFH6156 (SMD) feature a variety of transfer ratios, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and
is incorporated in a plastic DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation
up to an operation voltage of 400 VRMS or DC.
Specifications subject to change.
Features
• Excellent CTR Linearity Depending on Forward Current
• Isolation Test Voltage, 5300 VRMS
• Fast Switching Times
• Low CTR Degradation
• Low Coupling Capacitance
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J, Double Protection
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
• Switchmode power supply
• Telecom
• Battery powered equipment
EVERLIGHT EL 817C - 1-fold optocoupler, 5kV, 35V, 50mA, 200-400%, DIP-4
10.11 EUR
EL817 , 4 PIN DIP Phototransistor Photocoupler Description:
The EL817 series of devices each consist of an infrared emitting diodes, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.
Features:
• Current transfer ratio (CTR: 50~600% @ IF = 5mA, Vce = 5V)
- EL817 : 50 - 600
- EL817A : 80 - 160
- EL817B : 130 - 260
- EL817C : 200 - 400
- EL817D : 300 - 600
- EL817X : 100 - 200
- EL817Y : 150 - 300
• High isolation voltage between input and output (Viso = 5000Vrms )
• Creepage distance > 7.62mm
• Operating temperature up to +110°C
• Compact small outline package
• Compliance with EU REACH.
• The product itself will remain within RoHS compliant version
• UL and cUL approved(No.E214129)
• VDE approved (No.132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CQC approved
Application:
• Programmable controllers
• System appliances, measuring instruments
• Telecommunication equipments
• Home appliances, such as fan heaters, etc.
• Signal transmission between circuits of different potentials and impedances
EVERLIGHT 4N 35 - Optocoupler, phototransistor output, 5 KV, CTR 100%, DIP-6
10.2 EUR
BeschreibungDie Bauelemente der Serien 4N2X, 4N3X, H11AX bestehen jeweils aus einer infrarot-emittierenden Diode, die optisch an einen Fototransistor gekoppelt ist. Sie sind in einem 6-poligen DIP-Gehäuse verpackt und in einem weiten Rastermaß und als SMD-Option erhältlich.
Eigenschaften:
- Baureihe 4N2X: 4N25, 4N26, 4N27, 4N28
- 4N3X-Reihe: 4N35, 4N36, 4N37, 4N38
- H11AX-Reihe: H11A1, H11A2, H11A3, H11A4, H11A5
- Hohe Isolationsspannung zwischen Eingang und Ausgang (Viso=5000 V rms)
- Kriechstrecke >7,62 mm
- Betriebstemperatur bis zu +110°C
- Kompaktes Dual-in-Line-Paket
- Pb-frei und RoHS-konform.
- UL-zugelassen (Nr. E214129)
- VDE-geprüft (Nr. 132249)
- SEMKO
- NEMKO
- DEMKO
- FIMKO
- CSA
- CQC
Anwendungen
- Stromversorgungsregler
- Digitale Logikeingänge
- Mikroprozessor-Eingänge
VISHAY SFH 617A-4 - Optocoupler, phototransistor output, 5.3 KV, CTR 160-320%, DIP-4
10.27 EUR
"DescriptionThe SFH617A (DIP) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC. Specifications subject to change.
Features
• Good CTR Linearity Depending on Forward Current
• Isolation Test Voltage, 5300 VRMS
• High Collector-Emitter Voltage, VCEO = 70 V
• Low Saturation Voltage
• Fast Switching Times
• Low CTR Degradation
• Temperature Stable
• Low Coupling Capacitance
• End-Stackable, .100 "" (2.54 mm) Spacing
• High Common-Mode Interference Immunity
• Lead-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J, Double Protection
• DIN EN 60747-5-2 (VDE0884), DIN EN 60747-5-5 pending, Available with Option 1
• CSA 93751"
VISHAY SFH 615A-4 - Optocoupler, phototransistor output, 5.3 KV, CTR 160-320%, DIP-4
10.31 EUR
DescriptionThe SFH615A (DIP) and SFH6156 (SMD) feature a variety of transfer ratios, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and
is incorporated in a plastic DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation
up to an operation voltage of 400 VRMS or DC.
Specifications subject to change.
Features
• Excellent CTR Linearity Depending on Forward Current
• Isolation Test Voltage, 5300 VRMS
• Fast Switching Times
• Low CTR Degradation
• Low Coupling Capacitance
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J, Double Protection
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
• Switchmode power supply
• Telecom
• Battery powered equipment
LITEON LTV 358T-SMD - Single optocoupler, 3.75kV, 120V, 50mA, 80-400%, MFP-4
10.52 EUR
Features: • Current transfer ratio ( CTR : MIN. 80% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage ( Viso = 3.750Vrms )
• High collector-emitter voltage ( VCEO = 120V )
• Subminiature type (The volume is smaller than that of conventional DIP type by as far as 30%)
• Employs double transfer mold technology
• Mini-flat package : 2.0mm profile : LTV-358T series
• Safety approval:
- UL 1577 & cUL
- VDE DIN EN60747-5-5 (VDE 0884-5) ,
- CSA CA5A
- FIMKO/DEMKO/SEMKO/NEMKO
• RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
• ESD pass HBM 8000V/ MM2000V/ CDM2000V
• MSL class1
EVERLIGHT EL 357N-G - Optocoupler 3.75 kV 80 V 50 mA >50% MFP4
10.21 EUR
Phototransistor PhotocouplerOptocoupler 3.75 kV 80 V 50 mA >50% MFP4
4-pin ultra-small SOP
The EL357N-G contains an infrared emitting diode, optically coupled to a phototransistor detector. The device is in a 4-pin small outline SMD package.
VISHAY SFH 615A-1 - Optocoupler, phototransistor output, 5.3 KV, CTR 40-80%, DIP-4
10.26 EUR
DescriptionThe SFH615A (DIP) and SFH6156 (SMD) feature a variety of transfer ratios, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and
is incorporated in a plastic DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation
up to an operation voltage of 400 VRMS or DC.
Specifications subject to change.
Features
• Excellent CTR Linearity Depending on Forward Current
• Isolation Test Voltage, 5300 VRMS
• Fast Switching Times
• Low CTR Degradation
• Low Coupling Capacitance
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J, Double Protection
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
• Switchmode power supply
• Telecom
• Battery powered equipment
VISHAY SFH 617A-1 - Optocoupler, phototransistor output, 5.3 KV, CTR 40-80%, DIP-4
10.24 EUR
"DescriptionThe SFH617A (DIP) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC. Specifications subject to change.
Features
• Good CTR Linearity Depending on Forward Current
• Isolation Test Voltage, 5300 VRMS
• High Collector-Emitter Voltage, VCEO = 70 V
• Low Saturation Voltage
• Fast Switching Times
• Low CTR Degradation
• Temperature Stable
• Low Coupling Capacitance
• End-Stackable, .100 "" (2.54 mm) Spacing
• High Common-Mode Interference Immunity
• Lead-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J, Double Protection
• DIN EN 60747-5-2 (VDE0884), DIN EN 60747-5-5 pending, Available with Option 1
• CSA 93751"
EVERLIGHT EL 817S1(C)(TU) - 1-fold optocoupler, 5kV, 35V, 50mA, 200-400%, SMD-4
10.18 EUR
EL817 , 4 PIN SMD Phototransistor Photocoupler Description:
The EL817 series of devices each consist of an infrared emitting diodes, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.
Features:
• Current transfer ratio (CTR: 50~600% @ IF = 5mA, Vce = 5V)
- EL817 : 50 - 600
- EL817A : 80 - 160
- EL817B : 130 - 260
- EL817C : 200 - 400
- EL817D : 300 - 600
- EL817X : 100 - 200
- EL817Y : 150 - 300
• High isolation voltage between input and output (Viso = 5000Vrms )
• Creepage distance > 7.62mm
• Operating temperature up to +110°C
• Compact small outline package
• Compliance with EU REACH.
• The product itself will remain within RoHS compliant version
• UL and cUL approved(No.E214129)
• VDE approved (No.132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CQC approved
Application:
• Programmable controllers
• System appliances, measuring instruments
• Telecommunication equipments
• Home appliances, such as fan heaters, etc.
• Signal transmission between circuits of different potentials and impedances
EVERLIGHT EL 817S1(TU) - 1-fold optocoupler, 5kV, 35V, 50mA, 50-600%, SMD-4
10.16 EUR
EL817 , 4 PIN SMD Phototransistor Photocoupler Description:
The EL817 series of devices each consist of an infrared emitting diodes, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.
Features:
• Current transfer ratio (CTR: 50~600% @ IF = 5mA, Vce = 5V)
- EL817 : 50 - 600
- EL817A : 80 - 160
- EL817B : 130 - 260
- EL817C : 200 - 400
- EL817D : 300 - 600
- EL817X : 100 - 200
- EL817Y : 150 - 300
• High isolation voltage between input and output (Viso = 5000Vrms )
• Creepage distance > 7.62mm
• Operating temperature up to +110°C
• Compact small outline package
• Compliance with EU REACH.
• The product itself will remain within RoHS compliant version
• UL and cUL approved(No.E214129)
• VDE approved (No.132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CQC approved
Application:
• Programmable controllers
• System appliances, measuring instruments
• Telecommunication equipments
• Home appliances, such as fan heaters, etc.
• Signal transmission between circuits of different potentials and impedances
SHARP PR39MF22NSZH - SSR+ZCD, 4 kV, 600 V, 0.9 A, 5 mA, DIP8
11.86 EUR
The PR29MF21NSZ and PR39MF2xNSZ series solid-state relays (SSR) are a combination of an infrared emission diode (IRED), a phototriac detector and a main triac output. Ideal for controlling high-voltage alternating current loads with solid-state reliability, these devices provide 4.0 -kV (Viso(rms)) isolation from input to output.IT(rms).0.9 A, zero cross type
DIP 8-pin
Triac output SSR
SHARP PC357N4J000F - Single optocoupler, 3.75 kV, 80 V, 50 mA, 300-600 %, MFP-4
10.21 EUR
Mini flat housing, multipurpose photocouplerDescription:
The PC357NJ0000F series contains an IRED optically coupled to a phototransistor. It is packed in a 4-pin mini flat package. The input-output isolation voltage (RMS) is 3.75kV. The collector-emitter voltage is 80V and the CTR is 50% to 600% at an input current of 5mA.
Features:
• 4-pole mini flat package
• Double transfer form packing (ideal for flow soldering)
• High collector-emitter voltage (VCEO : 80V)
• Current transmission ratio (CTR) : MIN. 50% at IF=5mA, VCE=5V
• Several CTR ranks available
• High isolation voltage between input and output (Viso(rms) : 3,75kV)
• RoHS directive compliant
Approvals/conformity of the authority
• Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. PC357)
• Package resin : UL flammability grade (94V-0)
Applications
• Hybrid substrates that require high density mounting
• Programmable controls
VISHAY SFH 6156-3 - Optocoupler, phototransistor output, 5.3 KV, CTR 100-200%, SMD-4
10.47 EUR
DescriptionThe SFH615A (DIP) and SFH6156 (SMD) feature a variety of transfer ratios, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and
is incorporated in a plastic DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation
up to an operation voltage of 400 VRMS or DC.
Specifications subject to change.
Features
• Excellent CTR Linearity Depending on Forward Current
• Isolation Test Voltage, 5300 VRMS
• Fast Switching Times
• Low CTR Degradation
• Low Coupling Capacitance
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J, Double Protection
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
• Switchmode power supply
• Telecom
• Battery powered equipment
SHARP PR36MF21NSZH - SSR+ZCD, 4 kV, 600 V, 0.6 A, 10 mA, DIP8
11.24 EUR
Solid-state relays (SSR) consist of an infrared emission diode (IRED), a phototriac detector and a main triac output. Ideal for controlling high-voltage alternating current loads with solid-state reliability, these devices provide 4.0 -kV (Viso(rms)) isolation from input to output.IT(rms).0.6 A, zero cross type
DIP 8-pin
Triac output SSR
SHARP PR36MF51NSLH - SSR, 4 kV, 600 V, 0.6 A, 10 mA, DIP8
11.14 EUR
The PR33MF51NSZF series solid-state relays (SSR) are a combination of an infrared emission diode (IRED), a phototriac detector and a main triac output. These devices are ideal for controlling high-voltage alternating current loads with semiconductor reliability while providing 4-kV (Viso(rms)) isolation from the inputIT(rms).0.3 A, non-zero cross type
DIP 8-pin
Triac output SSR
LITEON LTV 817 - Single optocoupler, 5kV, 35V, 50mA, 50-600%, DIP-4
10.12 EUR
"Features:• Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Dual-in-line package :
- LTV-817 : 1-channel type
- LTV-827 : 2-channel type
- LTV-847 : 4-channel type
• Safety approval
UL / CSA / FIMKO / NEMKO / DEMKO / SEMKO / VDE* approved *Required ""V"" ordering option"
EVERLIGHT EL 817 - 1-fold optocoupler, 5kV, 35V, 50mA, 50-600%, DIP-4
10.15 EUR
EL817 , 4 PIN DIP Phototransistor Photocoupler Description:
The EL817 series of devices each consist of an infrared emitting diodes, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in wide-lead spacing and SMD option.
Features:
• Current transfer ratio (CTR: 50~600% @ IF = 5mA, Vce = 5V)
- EL817 : 50 - 600
- EL817A : 80 - 160
- EL817B : 130 - 260
- EL817C : 200 - 400
- EL817D : 300 - 600
- EL817X : 100 - 200
- EL817Y : 150 - 300
• High isolation voltage between input and output (Viso = 5000Vrms )
• Creepage distance > 7.62mm
• Operating temperature up to +110°C
• Compact small outline package
• Compliance with EU REACH.
• The product itself will remain within RoHS compliant version
• UL and cUL approved(No.E214129)
• VDE approved (No.132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CQC approved
Application:
• Programmable controllers
• System appliances, measuring instruments
• Telecommunication equipments
• Home appliances, such as fan heaters, etc.
• Signal transmission between circuits of different potentials and impedances
LITEON LTV 827S - Dual optocoupler, 5kV, 35V, 50mA, 50-600%, SMD-8
10.22 EUR
"Features:• Current transfer ratio
( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
• High input-output isolation voltage
( Viso = 5,000Vrms )
• Response time
( tr : TYP. 4µs at VCE = 2V, IC = 2mA, RL = 100R )
• Surface mounting package :
- LTV-817S : 1-channel type
- LTV-827S : 2-channel type
- LTV-847S : 4-channel type
• Safety approval
UL / CSA / FIMKO / NEMKO / DEMKO / SEMKO / VDE* approved *Required ""V"" ordering option"
VISHAY TZMC2V4 - Zener diode, 2,4 V, 0,5 W, 5%, SOD-80 (minimelf)
9.98 EUR
TZMC-Series Small Signal Zener Diodes 0,5W 5%
Features:
• Very sharp reverse characteristic
• Low reverse current level
• Very high stability
• Low noise
• TZMC - VZ-tolerance ± 5 %
• AEC-Q101 qualified
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Application:
• Voltage stabilization
Delivery in complete industrial packaging (7-inch roll / 2500 pieces) possible, please contact our quotation department!