SHARK S25-V - SHARKOON MIDI Tower S25-V.
79.72 EUR
Browse the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; it classifies in the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
The S25-V is completely black and has a minimalist, timeless design and countless features. The elegant look of the housing also continues inside. Tidy outside and tidy inside - power supply, hard disks and cables disappear from the field of vision.
Order with system
The special design of the housing interior offers enormous possibilities for the discreet installation of various components. The wiring can be unobtrusive and hidden, so the airflow inside the housing is not affected. The power supply and up to three 3.5-inch hard drives can be installed in a tunnel in the bottom of the chassis to avoid damaging the optics. The tunnel has ventilation slots, side and top, to ensure optimal cooling of the hard drives. The mainboard and the remaining components can be perfectly wired thanks to the cable inlets. The installation of a new heat sink for the CPU is also a child's play thanks to the opening in the mainboard tray. Tower coolers can be installed up to a height of 16.7 cm. The maximum length of the graphics cards that can be used is 40 cm, and power supplies can be used up to a length of 20.5 cm. Three pre-installed dust filters protect the installed hardware from contamination. For cleaning, these can be easily removed and re-installed. In addition, a filter is pre-installed in the top, which can be removed quickly thanks to its magnetic attachment.
Wireless Front Panel Design
Another big advantage of the S25-V is the wireless front panel design. The bezel can be easily removed at any time without the need to disconnect a cable. This makes installing a 5.25-inch or 3.5-inch drive much easier.
Optimal preparation for the perfect airflow
The front of the housing has numerous air inlets on the right and left, which are not visible from the front, to ensure a supply of cold air. A 120 mm fan is already pre-installed in the front of the housing behind the dust filter. Alternatively, suitable holes are available for two 140 mm fans. For water cooling, the S25-V offers the possibility to operate a 240 mm or 280 mm radiator with a total height of up to 5.5 cm including a fan in the front of the housing. A 120 mm fan is pre-installed on the back of the chassis. Optionally, three 120 mm or two 140 mm fans can be installed under the magnetic dust filter. The use of slotted holes also offers optimal possibilities for perfect positioning of the fans or the radiator.
Modern Front Connections
Two USB 3.0 and two audio interfaces in the front of the housing provide quick access for connecting the most important peripheral devices. The USB 3.0 ports connect to the same via a 19-pin motherboard connector and provide an alternative USB 2.0 tap to ensure backward compatibility with older boards.
Versatile Installation Options
The S25-V provides two 5.25-inch drive bays for optical drives equipped with auto-closing quick-release latches. For...
EAN: 4044951019298
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
The S25-V is completely black and has a minimalist, timeless design and countless features. The elegant look of the housing also continues inside. Tidy outside and tidy inside - power supply, hard disks and cables disappear from the field of vision.
Order with system
The special design of the housing interior offers enormous possibilities for the discreet installation of various components. The wiring can be unobtrusive and hidden, so the airflow inside the housing is not affected. The power supply and up to three 3.5-inch hard drives can be installed in a tunnel in the bottom of the chassis to avoid damaging the optics. The tunnel has ventilation slots, side and top, to ensure optimal cooling of the hard drives. The mainboard and the remaining components can be perfectly wired thanks to the cable inlets. The installation of a new heat sink for the CPU is also a child's play thanks to the opening in the mainboard tray. Tower coolers can be installed up to a height of 16.7 cm. The maximum length of the graphics cards that can be used is 40 cm, and power supplies can be used up to a length of 20.5 cm. Three pre-installed dust filters protect the installed hardware from contamination. For cleaning, these can be easily removed and re-installed. In addition, a filter is pre-installed in the top, which can be removed quickly thanks to its magnetic attachment.
Wireless Front Panel Design
Another big advantage of the S25-V is the wireless front panel design. The bezel can be easily removed at any time without the need to disconnect a cable. This makes installing a 5.25-inch or 3.5-inch drive much easier.
Optimal preparation for the perfect airflow
The front of the housing has numerous air inlets on the right and left, which are not visible from the front, to ensure a supply of cold air. A 120 mm fan is already pre-installed in the front of the housing behind the dust filter. Alternatively, suitable holes are available for two 140 mm fans. For water cooling, the S25-V offers the possibility to operate a 240 mm or 280 mm radiator with a total height of up to 5.5 cm including a fan in the front of the housing. A 120 mm fan is pre-installed on the back of the chassis. Optionally, three 120 mm or two 140 mm fans can be installed under the magnetic dust filter. The use of slotted holes also offers optimal possibilities for perfect positioning of the fans or the radiator.
Modern Front Connections
Two USB 3.0 and two audio interfaces in the front of the housing provide quick access for connecting the most important peripheral devices. The USB 3.0 ports connect to the same via a 19-pin motherboard connector and provide an alternative USB 2.0 tap to ensure backward compatibility with older boards.
Versatile Installation Options
The S25-V provides two 5.25-inch drive bays for optical drives equipped with auto-closing quick-release latches. For...
EAN: 4044951019298
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
SHARK VS4-V - Sharkoon VS4-V ATX case
65.66 EUR
The VS4-V ATX Tower is a versatile, configurable case for price-conscious users. The pre-installed fan and up to four more optional fans continually provide optimal air circulation, supported by an efficient airflow system. In addition, the outwardly recessed side panels offer generous space for components, which are well protected behind the puristic front with two USB 3.0 and two audio ports and by an integrated dust filter. Not out of thin air
A 120 mm fan is pre-installed in the front of the VS4-V. In order to further increase the air flow inside the case, an additional 120 mm fan can be installed in the front. The VS4-V also has enough room for two optional 120 mm fans in the side panel and one in the back. The case also has an installation opening for CPU coolers.
SHARKOON SHARK 1337V2RGB3 - Mouse mat, gaming, 360 x 270 mm, RGB, black
26.44 EUR
Visual highlight for each setupThe 1337 RGB V2 has an impressive look thanks to atmospheric illumination integrated into the edge. Four luminosity modes, such as single colours, two colours at the same time or a pulsating colour change, can be controlled and adjusted freely via the controller. The edge sewn with thin nylon threads ensures full luminosity, which makes the 1337 RGB V2 an effective highlight.
Made for precision gaming
The surface of the 1337 RGB V2 is designed for precision and smooth gliding. The soft material is durable and offers low resistance. Demanding gamers benefit from the optimal gliding properties, which enable both rapid and sensitive movements. The 1337 RGB V2 can withstand even the most hectic actions with its rubberised underside. In addition, a water-repellent coating makes the mouse mat easy to clean.
SHARKOON SHARK 1337V2XXL - Mouse mat, gaming, 900 x 400 mm, black
28.5 EUR
With the 1337 V2 Gaming Mat, we have made our most popular mouse mat even better: for the V2, we have applied a water-repellent coating to the textile surface and cut all edges precisely with the laser so that unsightly fraying is prevented. Like all Gaming Mats in the 1337 series, the V2 also has an absolutely non-slip rubber underside and a textile surface with optimal gliding properties for all types of sensors.Smooth gameplay and workflows
The 1337 V2 uses a proven textile surface that is not only robust and durable, but also offers minimal starting and friction resistance. It therefore ensures that the mouse glides without resistance, regardless of the mouse sensor used. The underside is also made of sturdy rubber, which prevents the mouse mat from slipping away unnoticed while gaming and working.
SHARKOON SHARK 1337V2L - Mouse mat, gaming, 355 x 255 mm, black
17.13 EUR
With the 1337 V2 Gaming Mat, we have made our most popular mouse mat even better: for the V2, we have applied a water-repellent coating to the textile surface and cut all edges precisely with the laser so that unsightly fraying is prevented. Like all Gaming Mats in the 1337 series, the V2 also has an absolutely non-slip rubber underside and a textile surface with optimal gliding properties for all types of sensors.Smooth gameplay and workflows
The 1337 V2 uses a proven textile surface that is not only robust and durable, but also offers minimal starting and friction resistance. It therefore ensures that the mouse glides without resistance, regardless of the mouse sensor used. The underside is also made of sturdy rubber, which prevents the mouse mat from slipping away unnoticed while gaming and working.
SHARKOON SHARK 1337V2M - Mouse mat, gaming, 285 x 195 mm, black
15.07 EUR
With the 1337 V2 Gaming Mat, we have made our most popular mouse mat even better: for the V2, we have applied a water-repellent coating to the textile surface and cut all edges precisely with the laser so that unsightly fraying is prevented. Like all Gaming Mats in the 1337 series, the V2 also has an absolutely non-slip rubber underside and a textile surface with optimal gliding properties for all types of sensors.Smooth gameplay and workflows
The 1337 V2 uses a proven textile surface that is not only robust and durable, but also offers minimal starting and friction resistance. It therefore ensures that the mouse glides without resistance, regardless of the mouse sensor used. The underside is also made of sturdy rubber, which prevents the mouse mat from slipping away unnoticed while gaming and working.
SHARKOON SHARK 1337V2RGB9 - Mouse mat, gaming, 900 x 425 mm, RGB, black
36.77 EUR
Visual highlight for each setupThe 1337 RGB V2 has an impressive look thanks to atmospheric illumination integrated into the edge. Four luminosity modes, such as single colours, two colours at the same time or a pulsating colour change, can be controlled and adjusted freely via the controller. The edge sewn with thin nylon threads ensures full luminosity, which makes the 1337 RGB V2 an effective highlight.
Made for precision gaming
The surface of the 1337 RGB V2 is designed for precision and smooth gliding. The soft material is durable and offers low resistance. Demanding gamers benefit from the optimal gliding properties, which enable both rapid and sensitive movements. The 1337 RGB V2 can withstand even the most hectic actions with its rubberised underside. In addition, a water-repellent coating makes the mouse mat easy to clean.
SHARKOON SHARK 1337V2BIG - Mouse mat, gaming, 1200 x 600 mm, black
31.6 EUR
With the 1337 V2 Gaming Mat, we have made our most popular mouse mat even better: for the V2, we have applied a water-repellent coating to the textile surface and cut all edges precisely with the laser so that unsightly fraying is prevented. Like all Gaming Mats in the 1337 series, the V2 also has an absolutely non-slip rubber underside and a textile surface with optimal gliding properties for all types of sensors.Smooth gameplay and workflows
The 1337 V2 uses a proven textile surface that is not only robust and durable, but also offers minimal starting and friction resistance. It therefore ensures that the mouse glides without resistance, regardless of the mouse sensor used. The underside is also made of sturdy rubber, which prevents the mouse mat from slipping away unnoticed while gaming and working.
SHARKOON SHARK 1337V2XL - Mouse mat, gaming, 444 x 355 mm, black
19.2 EUR
With the 1337 V2 Gaming Mat, we have made our most popular mouse mat even better: for the V2, we have applied a water-repellent coating to the textile surface and cut all edges precisely with the laser so that unsightly fraying is prevented. Like all Gaming Mats in the 1337 series, the V2 also has an absolutely non-slip rubber underside and a textile surface with optimal gliding properties for all types of sensors.Smooth gameplay and workflows
The 1337 V2 uses a proven textile surface that is not only robust and durable, but also offers minimal starting and friction resistance. It therefore ensures that the mouse glides without resistance, regardless of the mouse sensor used. The underside is also made of sturdy rubber, which prevents the mouse mat from slipping away unnoticed while gaming and working.
SHARK TG4 RGB - Sharkoon TG4 RGB ATX case
97.29 EUR
With the TG4 ATX RGB midi tower, you can encase your hardware in elegant glass and rich colours. This is ensured by the front panel and a side panel made of tempered glass and the four pre-installed LED 120 mm fans. The case design is based on the TG5. However, the TG4 is clearly more compact than its big brother and is especially suited for price-conscious gamers who have air-cooling systems. Eyecatcher in 16.8 million colours
The TG4 RGB comes pre-installed with three addressable LED fans behind the front panel and another on the rear panel. These can be conveniently and creatively lit in 16.8 million colours via mainboards which have connections for addressable LEDs (pin assignment: 5V-D-coded-G or 5V-D-G). Alternatively, if this mainboard connection is not available, the reset button can be used to select 14 lighting effects.
SHARK RGB SLI SW - Sharkoon RGB Slider Black ATX housing
74.91 EUR
The RGB Slider is a compact midi-ATX case with a simple look that focuses on the essentials, but still has some advantages that set it apart from other cases in its class. Thanks to its simple shape, it is pleasantly discreet and unassuming. However, the case also has highlights such as the side window made of tempered glass, the I/O panel with two USB 3.0 ports and the RGB LED strip integrated in the front panel. If the manual colour control is used, the strip can be lit in 14 different lighting modes. Additional lighting elements can also be added and controlled via the RGB controller. The RGB slider also offers more in terms of interior installation options than it would suggest at first glance.
SHARK SK3 RGB - Sharkoon SK3 RGB ATX case
68.81 EUR
A compact case with fine details: the SK3 RGB is a visually unobtrusive midi ATX case which can be optimally integrated into minimalist setups. Nevertheless, it sets visually appealing accents with its clear and tidy form and front panel in a carbon-fibre look. The case also has a side panel made of tempered glass. The interior is visible through this, illuminated by a pre-installed 120 mm RGB LED fan. Minimalist carbon-fibre design
The SK3 RGB is intentionally minimalist and pleasantly unobtrusive. The design is made complete with a front panel in carbon-fibre style, giving the small case a distinct look of refinement. For subtle lighting effects, a 120 mm RGB LED fan is installed at the back of the case, which can be illuminated in 14 pre-set modes via the integrated controller. In addition, it can also be controlled through compatible mainboards with a 5V-D-coded-G or 5V-D-G pin assignment via software such as Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion and ASRock Polychrome SYNC.
SHARK TK4 RGB - Sharkoon TK4 RGB ATX case
84.32 EUR
The TK4 RGB is a compact midi ATX case that impresses with its outward appearance as well as its inner values. The front panel blends perfectly with the otherwise restrained design of the black casing and allows a view of the three 120 mm RGB LED fans, which provide spectacular lighting effects. An I/O panel with two USB 3.0 ports and a tempered glass side panel complete the overall impression. A front panel with radiance
Behind the tempered glass front panel, three 120 mm RGB LED fans ensure an even airflow and thus adequate cooling of the system. The striking illumination of the fans can be easily adjusted as desired using an integrated controller with 14 pre-set modes. In addition, it is also possible to set the illumination according to your own requirements via compatible mainboards with MSI Mystic Light Sync, Asus Aura Sync, Gigabyte Fusion and ASRock Polychrome SYNC.
SHARK RGB WAVE - Sharkoon RGB Wave ATX case
98.43 EUR
For gamers and surfers: the air-permeable front panel of the RGB Wave has a strikingly effective 3D wave pattern, behind which the three RGB fans radiate in all their colours. Together with the 120 mm fan installed at the rear panel, everything will stay nice and cool in this midi-ATX case. The RGB Wave also has an I/O panel with two USB 3.0 ports and one USB Type-C 3.2 Gen 2 port, and, in addition, the case comes with a side panel made of tempered glass.Make waves
The front panel of the RGB Wave offers an especially eye-catching look. Strips made of synthetic material traverse across the front panel and provide the case with a unique 3D wave design. This is brought to the fore by the illumination of the three 120 mm RGB fans that are pre-installed directly behind. The finishing touch is given by the carbon-fibre textured frame that surrounds the wave design.
SHARK V1000 - Sharkoon Micro ATX Case V1000
73.52 EUR
Whether you're looking for a sophisticated office computer, a compact multimedia station or a low-cost gaming PC, the V1000 is a micro-ATX case that offers a wide range of solutions for individual users. The two pre-installed fans and mesh grid at the front ensure optimal airflow, but can be extended as desired using two additional fans. The integrated power supply tunnel at the bottom removes cables from view and keeps the interior tidy. The flexible drive housing options also help to organise your setup.Compatibility
- Motherboard: Mini-ITX, Micro-ATX
- Max. length of graphics card: 40.0 cm
- Max. height of CPU cooler: 15.5 cm
- Max. length of power supply unit: 24.0 cm
- Max. height of radiator incl. fan (front): 5.9 cm
IT88881236 - Midi-Tower Inter-Tech IT-5905 black USB 3.0
50.16 EUR
Details:- external: 1x 5.25'', 1x 3.5''
- Internal: 4x 3.5'', 2x 2.5''
- Front I/O: 2x USB 3.0, 1x headphone, 1x microphone
- PCI-slots: 7
- Fan(s) (front): 1x 120mm (optional)
- Fan(s) (rear): 1x 120mm (optional)
- fan (left): 2x 120mm (optional)
- fan right: not available
- Fan(s) (top): not available
- Fan(s) (bottom): not available
- fan (other): not available
- Motherboard: to ATX
- Power supply: ATX
- Power supply position: top
- Colour: black, inside black
- Dimensions (WxHxD): 200x410x415mm
- Weight: 2.29kg
- Special features: cable management
PHT XT523V1DBK - PHANTEKS XT view tempered glass windows, black
97.7 EUR
- Classic midi-tower with many cooling options
- Three D-RGB fans pre-installed at the factory, including controllers
- Supports ''MSI Project Zero'' and ''ASUS BTF'' motherboards
- Tempered glass side panel for an impressive view of your hardware
- Optimal cooling thanks to space for up to nine fans
- 360-mm radiators can be placed on the cover
- Graphics cards up to 415 mm long
- Maximum CPU cooler height of 184 mm
PHT XT523V1DWT - PHANTEKS XT view tempered glass windows, white
102.7 EUR
- Classic midi-tower with many cooling options
- Three D-RGB fans pre-installed at the factory, including controllers
- Supports ''MSI Project Zero'' and ''ASUS BTF'' motherboards
- Tempered glass side panel for an impressive view of your hardware
- Optimal cooling thanks to space for up to nine fans
- 360-mm radiators can be placed on the cover
- Graphics cards up to 415 mm long
- Maximum CPU cooler height of 184 mm