SEEEDUINO V4.3 - Seeeduino V4.3
26.69 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
"The Seeeduino V4.3 is an Arduino compatible board based on the ATmega328P MCU and is characterized by high stability and ease of use. The board uses the Arduino UNO bootloader and the ATMEGA16U2 as UART-to-USB converter, which enables programming via a micro USB cable. It offers the option of switching the system supply voltage between 3.3V and 5V, for example to save energy.
The board can be operated both via a micro USB cable and via a DC jack with an input voltage of 7 to 15V. The ability to switch the system voltage between 3.3V and 5V is particularly advantageous for applications that require lower power consumption. Programming is straightforward via a micro USB cable, with the CP16U2 enabling communication between UART and USB.
In addition to the hardware, the Seeeduino V4.2 provides access to an extensive collection of over 300 Grove modules, enabling connection and experimentation without soldering or jumpers. These modules cover a wide range of applications and support both open hardware and open source software.
Technical specifications
To summarize, the Seeeduino V4.3 is an excellent choice for developers looking for a reliable and easy-to-use Arduino-compatible board. The flexible power supply and programmability via USB make it a versatile platform for a variety of projects. The switchable operating voltage and support for a wide range of modules significantly expand the spectrum of possible applications.
Instructions in pdf format are available for Grove users (especially beginners). Before using the product, you should definitely read the chapters ""Preface"", ""Getting Started"" and ""Introduction to Grove""!
Further information about the board as well as data sheets, instructions and downloads can be found at http://wiki.seeedstudio.com/Seeeduino_v4.2/"
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"The Seeeduino V4.3 is an Arduino compatible board based on the ATmega328P MCU and is characterized by high stability and ease of use. The board uses the Arduino UNO bootloader and the ATMEGA16U2 as UART-to-USB converter, which enables programming via a micro USB cable. It offers the option of switching the system supply voltage between 3.3V and 5V, for example to save energy.
- is based on the ATmega328P MCU and is equipped with the Arduino UNO bootloader
- enables programming via a micro USB cable
- power supply via DC Jack input, accepts 7 to 15V
- switchable operating voltage between 3.3V and 5V
- integrates an ATMEGA16U2 as UART-to-USB converter
The board can be operated both via a micro USB cable and via a DC jack with an input voltage of 7 to 15V. The ability to switch the system voltage between 3.3V and 5V is particularly advantageous for applications that require lower power consumption. Programming is straightforward via a micro USB cable, with the CP16U2 enabling communication between UART and USB.
In addition to the hardware, the Seeeduino V4.2 provides access to an extensive collection of over 300 Grove modules, enabling connection and experimentation without soldering or jumpers. These modules cover a wide range of applications and support both open hardware and open source software.
Technical specifications
- ATmega328P microcontroller
- Arduino UNO bootloader
- 14 digital I/O pins (6 PWM outputs)
- 6 analog inputs
- ISP header
- Arduino UNO-R3 shield compatibility
- Programming and power supply via micro USB
- 3 plug-in board connections
- Switch for operating voltage 3.3/5 V
To summarize, the Seeeduino V4.3 is an excellent choice for developers looking for a reliable and easy-to-use Arduino-compatible board. The flexible power supply and programmability via USB make it a versatile platform for a variety of projects. The switchable operating voltage and support for a wide range of modules significantly expand the spectrum of possible applications.
Instructions in pdf format are available for Grove users (especially beginners). Before using the product, you should definitely read the chapters ""Preface"", ""Getting Started"" and ""Introduction to Grove""!
Further information about the board as well as data sheets, instructions and downloads can be found at http://wiki.seeedstudio.com/Seeeduino_v4.2/"
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
PANASONIC S-F 4,7M 6,3 - E-Cap, radial, 4,7 mF, 6,3 V, RM 5, 105°C, 10000 h, 20%
10.97 EUR
Aluminum Electrolytic CapacitorsRadialLead Typee
Series: F
Type: S
Features
• Endurance : 105°C, 10000 h
AMEWI 24058 - RC plane, SKYRUNNER V3 Gyro, 2.4 GHz, RTF
108.41 EUR
"The entry-level Skyrunner has once again been taken to a whole new level in the V3 model: With its 3-axis stabilisation, this flight model with a wingspan of 750 mm is suitable for first-time and experienced pilots alike. The gyroscopic system keeps the aircraft safely on course at all times. Simply accelerate, simulate a slight climb and the gyro will immediately step in to provide a helping hand so the flying fun can begin.The electric glider has modes for both beginners and experts. In beginner mode, the model cannot stall. If switched to advanced mode, tricks such as loops are possible. A long flight time together with good gliding properties make for out-and-out flying fun. The tough EPP material ensures long durability.
Features:
- Span: 750 mm
- Length: 565 mm
- Height: 120 mm
- Battery: LiPo 2S 7.4 V/300 mAh LiPo 20C, 40 x 16 x 10 mm, 16 g
- Flight time: approx. 12 - 14 mins
- Remote control: 2.4 GHz/3-channel
- Charger: USB charging cable, 7.4 V 500 mA
- Model
- Remote control
- Battery
- USB charging cable
Included in delivery:
Required accessories:
4x AA 1.5 V batteries for the remote control"
GREEN CELL GC AGM38 3.4AH - Rechargeable lead-fleece battery, AGM, 6 V, 3.4 Ah
24.11 EUR
"Greencell AGM battery 6V 3.4Ah fleece maintenance-free lead acid battery for electric toys alarms, children's vehicles, parking meters, scales, liftsBenefits:
- Ideal for buffer and clock operation: the battery can be used in UPS, electric toys, alarm systems, monitoring or portable devices etc.
- Maintenance-free battery operation - up to 5 years of service life.
- Design prevents electrolyte leakage: the possibility of safe battery operation in any position
- Operational safety: vibration resistance, storage capacity in a wide temperature range
What is an AGM battery?
- The AGM is an energy storage battery with a wide range of commercial applications. It can not only power toys and alarm systems, but also forms the heart of any UPS.
Maintenance-free operation
- Batteries manufactured using AGM technology are designed to ensure maximum safety during use. Special glass fibres ensure the batteries are completely leak-proof, which enables repeated charging and discharging of the battery without the fear of loss of parameters."
STARTECH.COM ST PEXUSB3S42V - 4 Port dual Bus USB 3.0 PCI Express card
101.94 EUR
"Add four independent-channel USB 3.0 ports, LP/SATA power, and charging support to a PC through a PCI Express slot- Provides four external USB 3.0 ports on two independent bus channels
- Supports a total of up to 10 Gbit/s transmission bandwidth - up to 5 Gbit/s per two ports
- UASP support for all four ports
- PCIe x4 interface compliant with PCI Express 2.0 specifications
- Optional LP4 or SATA power port provides up to 900 mA per USB port
With the PEXUSB3S42V 4-port PCI Express USB 3.0 card, you can add four USB 3.0 ports with two dedicated 5-Gbps channels to a PCIe x4-capable PC. This independent-port architecture improves USB 3.0 performance by transferring data to the computer on two separate channels, making file transfer faster.
When multiple devices are connected, the maximum bandwidth is distributed across all ports with traditional Single Bus USB 3.0 cards. By using a second host controller chipset, the transmission channel is only shared by two instead of four ports. By allocating up to 5 Gbit/s on two ports each, performance bottlenecks are reduced and the total available bandwidth effectively doubled to 10 Gbit/s.
With support for USB attached SCSI Protocol (UASP), this USB 3.0 controller in combination with a UASP-enabled chassis is up to 70% faster than a conventional USB 3.0 (Note: UASP requires a compatible operating system). Using a more efficient protocol than the conventional USB (Bulk-only Transport) OFFERED, UASP technology optimizes transmissions by processing multiple commands simultaneously, significantly increasing transmission speed and reducing data transfer wait times. For more information, see our UASP test results below.
For high-power USB devices, this PCIe USB 3.0 card has an optional SATA or LP4 power connector for connecting to the system's power supply and providing up to 900 mA of power per port for USB 3.0 bus-powered devices (500 mA for USB 2.0). The USB 3.0 card also supports the USB Battery Charger Specification 1.2 (Apple Mode only), so you can charge compatible Apple devices (iPhones and iPads) faster than with a standard USB 3.0 port.
The controller card is compliant with USB 3.0 standards and backward compatible with existing USB 2.0/1.1 devices. For added versatility, the USB 3.0 PCIe card is equipped with a standard profile slot plate and is supplied with a low profile/half height slot plate for installation in compact computers.
Improved performance with UASP
In tests, UASP showed up to 70% higher read speed and 40% higher write speed compared to a traditional USB 3.0 at peak performance.
At the same peak, UASP also showed a 80% reduction in processor resource requirements in the test.
Test results were obtained using an Intel® Ivy Bridge system, 3.0 USB StarTech.com mezzanine cards, UASP-enabled StarTech.com-Gehäuse, and SATA III solid state drive."
SCHIEFER LIGHTING SCHI 940944500 - T1 3/4 MF 5.7x15.87, 28 V, 40 mA, C2F, 7K hrs, clear - 387 MF6S-
10.77 EUR
T1 3/4 midget flanged 5.7x15.87 mm, 28 V, 40 mA, C2F, 7000 hours, clear - reference: 387 MF6S-8
GW-INSTEK GPP-4323 - Laboratory power supply, 0 - 32 V, 0 - 3 A, programmable, 4 CH
810.38 EUR
"With the maximum output power of 217 W, the GPP series multi-channel programmable DC power suppies are the best choice for demanding taks in industrial and research environments.This series not only provides high program resolution (1 mV / 0.1 mA) and read back resolution (0.1m V / 0.1 mA), but also features optimal low-ripple noise characteristics <=350uVrms / <=2mArms and output transient recovery capability?50S. Independent output on-off switch is provided for each channel. The Output Recorder Function Records The Output Voltage & Current Parameters with A Minimum Recording Interval of 1 Second.
Product benefits:
- 4.3"" TFT-LCD
- Load function (CC, CV, CR Mode)
- Output setting resolution: 1 mV / 0.1 mA, read back resolution: 0.1 mV / 0.1 mA
- Low ripple noise: <=350uVrms/ <=2mArms
- Transient Response Time: <=50uS
- Over voltage protection / over current protection / over temperature protection
- Delay function / output monitoring function / output recorder function
- Intelligent temperature control fan effectively reduces noise
- Sequential output function and built-in 8 template waveforms
- Provides 10 sets of memory for each sequence/delay/recorder/panel setting condition
- Connection types: RS-232, USB, Ext I/O (standard) / LAN, GPIB (optional)
- Compatible with commands of GPD-x303S series
SCHIEFER LIGHTING SCHI 940942800 - T1 3/4 MF 5.7x15.87, 28 V, 25 mA, C2F, 15K hrs, clear
10.86 EUR
T1 3/4 midget flanged 5.7x15.87 mm, 28 V, 25 mA, C2F, 15,000 hours, clear
STARTECH.COM ST PEXUSB3S4V - 4Port USB 3.0 PCI Express card with UASP
65.71 EUR
"Add 4 external USB 3.0 ports to a low profile or standard computer via PCI Express- 4 external USB 3.0 ports in stack layout
- UASP support for more efficient data transfer
- Fully compliant with USB 3.0 revision 1.0 and Intel xHCI rev 0.95 specifications
- Integrated optional SATA power connector for bus-powered USB devices
- Provides up to 900 mA per USB port
The PCI Express USB 3.0 card (with SATA power supply) PEXUSB3S4V provides a PCI Express-enabled computer system with 4 external USB 3.0 ports supporting data rates of up to 5 Gbit/s and backward compatibility with USB 2.0/1.x devices.
With support for USB attached SCSI Protocol (UASP), this USB 3.0 controller in combination with a UASP-enabled chassis is up to 70% faster than a conventional USB 3.0 (Note: UASP requires a compatible operating system). Using a more efficient protocol than the conventional USB (Bulk-only Transport) OFFERED, UASP technology optimizes transmissions by processing multiple commands simultaneously, significantly increasing transmission speed and reducing data transfer wait times. For more information, see our UASP test results below.
With this card, the ports are arranged on top of each other so that all four USB 3.0 ports are accessible from the outside, while the card still fits into a compact computer system or a low profile computer system using the included low profile slot plate.
Thanks to the integrated SATA power connection, each USB port also supplies the devices, which can be powered via a host bus connection, with up to 900 mA (500 mA for USB 2.0 devices). To do this, simply connect the computer to the power supply.
Improved performance with UASP
UASP is supported on Windows® 8 and Server 2012. Compared to conventional USB 3.0, UASP performed at maximum system utilization with up to 70% faster read speed and up to 40% faster write speed in tests."
LC POWER LC-HUB-U3-4-V2 - USB 3.0 hub, 4 ports, USB-C power supply
18.17 EUR
"Connect up to 4x USB-A peripheral devices to your computer or notebook via USB-A.- USB 3.2 Gen. 1x1 interface, backwards compatible with USB 2.0/1.1
- 4x USB-A ports
- 1x USB-C port for an additional power supply
- Plug and play
- LED status indicator
Nominal data transfer rate:
- SuperSpeed up to 5 Gb/s (USB 3.0)
- High-speed up to 480 MB/s (USB 2.0)
- Full speed up to 12 MB/s (USB 1.1)
STARTECH.COM ST PEXUSB314A2V2 - PCle x4 > 4 x External USB 3.1 Type-A
144.22 EUR
"USB 3.2 Gen 2 (10 Gbps) PCI Express 3.0 PCIe x 4 slot USB Type-A- HIGH PERFORMANCE: USB PCIe card with 4 USB-A ports up to SuperSpeed 10 Gbps per port, dual ASM3142 controller with up to 20 Gbps total bandwidth over 4 ports, USB 3.1 Gen 2/USB 3.2 Gen 2x1, updated version of our popular PEXUSB314A2V USB card
- MAXIMUM USB PERFORMANCE: Support for multiple inputs for maximum bandwidth when using devices at different speeds, USB Attached SCSI Protocol (UASP) for storage devices such as SSDs, HDDs, NVMe drives and USB sticks
- POWER SUPPLY: the USB PCI Express expansion card with a SATA power header additionally supplies the USB ports with power (if the motherboard's power supply is insufficient) and delivers up to 4.5 W (5 V at 0.9 A) per USB-A port
This PCIe USB 3.2 Gen 2 interface card plugs into a free PCI Express x4 slot in your computer, allowing you to upgrade your current system by adding four SuperSpeed USB-A (10 Gbps) ports."
STARTECH.COM ST PEXUSB3S44V - 4 port PCIe card USB 3.0 PCIe with UASP
117.34 EUR
"The PEXUSB3S44V 4-port PCI Express USB 3.0 card allows you to add four dedicated 5-Gbps USB 3.0 ports to a PCIe x4-capable PC. This independent-port architecture improves USB 3.0 performance by transferring data to the computer on four separate channels, making file transfer faster.When multiple devices are connected, the maximum bandwidth is distributed across all ports with traditional Single Bus USB 3.0 cards. By using four host controller chipsets, each port is operated on a separate, independent transmission channel. By allocating up to 5 Gbit/s to each USB port, performance bottlenecks are reduced and the total available bandwidth is effectively quadrupled to 20 Gbit/s.
With support for USB attached SCSI Protocol (UASP) , this USB 3.0 controller in combination with a UASP-enabled chassis is up to 70% faster than a conventional USB 3.0 (Note: UASP requires a compatible operating system). Using a more efficient protocol than the conventional USB (Bulk-only Transport) OFFERED, UASP technology optimizes transmissions by processing multiple commands simultaneously, significantly increasing transmission speed and reducing data transfer wait times. For more information, see our UASP test results below.
For high-power USB devices, this PCIe USB 3.0 card has an optional SATA or LP4 power connector for connecting to the system's power supply and providing up to 900 mA of power per port for USB 3.0 bus-powered devices (500 mA for USB 2.0). The USB 3.0 card also supports the USB Battery Charger Specification 1.2 (Apple Mode only), so you can charge compatible Apple devices (iPhones and iPads) faster than with a standard USB 3.0 port.
The controller card is compliant with USB 3.0 standards and backward compatible with existing USB 2.0/1.1 devices. For added versatility, the USB 3.0 PCIe card is equipped with a standard profile slot plate and is supplied with a low profile/half height slot plate for installation in compact computers.
Improved performance with UASP
UASP is supported on Windows® 8, 8.1, Server 2012, and Linux Kernel 2.6.37 or later. In tests, UASP showed up to 70% higher read speed and 40% higher write speed compared to a traditional USB 3.0 at peak performance.
At the same peak, UASP also showed a 80% reduction in processor resource requirements in the test. Test results were obtained using an Intel® Ivy Bridge system, 3.0 USB StarTech.com mezzanine cards, UASP-enabled StarTech.com-Gehäuse, and SATA III solid state drive.
Features
- Provides four external independent USB 3.0 ports
- Supports a total of up to 20 Gbit/s transmission bandwidth - up to 5 Gbit/s per port
- UASP support for all four ports
- PCIe x4 interface compliant with PCI Express 2.0 specifications
- Optional LP4 or SATA power port provides up to 900 mA per USB port
- Supports USB Battery charging Specification 1.2...
LC POWER LC-HUB-C-M-4-V2 - USB 3.0 3-port hub, 1x USB-A, 1x USB-C, 1x HDMI
28.5 EUR
"Maximum connection optionsThe LC-HUB-C-MULTI-4-V2 greatly enhances your device's connectivity by allowing you to connect a USB Type-A peripheral and HDMI source via a USB Type-C port. This compact hub supports USB 3.2 Gen. 1x1 for fast data transfers.
It also features an HDMI output that supports resolutions up to 4K UHD (3840 x 2160) at 30 Hz or FHD (1920 x 1080) at 60 Hz. The plug-and-play functionality makes it simple and easy to use.
- Power delivery up to 100 W
- Aluminium alloy
- Plug and play
Efficient charging with up to 100 W
One of the outstanding features of the LC-HUB-C-MULTI-4-V2 is the PD (Power Delivery) port, which supports power transmission of up to 100 W. This allows you to quickly charge your USB Type-C-enabled laptop or tablet while using other devices at the same time.
Connections:
- 1x USB-A (USB 3.2 Gen. 1x1 (5 Gb/s))
- 1x USB-C (PD 100 W)
- 1x HDMI up to 4K UHD
(3840 x 2160 @ 30 Hz, FHD 1920 x 1080 @ 60 Hz)
SCHIEFER LIGHTING SCHI 940944200 - T1 3/4 MF 5.7x15.87, 28 V, 40 mA, C2F, 4K hrs, clear - 327
10.77 EUR
T1 3/4 midget flanged 5.7x15.87 mm, 28 V, 40 mA, C2F, 4000 hours, clear - reference: 327
SCHIEFER LIGHTING SCHI 92825000 - BA9s T10x28, 6.3 V, 158 mA, 4 lm, 1 W, C2V, 2K hrs, clear
10.45 EUR
BA9s T10x28 mm, 6.3 V, 158 mA, 4 lm, 1 W, C2V, 2000 hours, clear
SCHIEFER LIGHTING SCHI 80921500 - T1 3/4 E5/8 5.7x16, 6 V, 60 mA, C2R, 5K hrs, clear
10.81 EUR
T1 3/4 E5/8 5.7x16 mm, 6 V, 60 mA, C2R, 5000 hours, clear
SCHIEFER LIGHTING SCHI 950953100 - T1 3/4 MG 5.7x16, 48 V, 25 mA, CC2F, 5K hrs, clear
11.14 EUR
T1 3/4 midget grooved 5.7x16 mm, 48 V, 25 mA, CC2F, 5000 hours, clear
SCHIEFER LIGHTING SCHI 950956400 - T1 3/4 MG 5.7x16, 60 V, 20 mA, CC2F, 5K hrs, clear
11.19 EUR
T1 3/4 midget grooved 5.7x16 mm, 60 V, 20 mA, CC2F, 5000 hours, clear
SCHIEFER LIGHTING SCHI 134405770 - P13.5s 11x30, 4.8 V, 750 mA, 50 lm, 3.6 W, C2R, 20 hrs, clear kr
10.77 EUR
P13.5s prefocus torch 11x30 mm, 4.8 V, 750 mA, 50 lm, 3.6 W, C2R, 20 hours, clear krypton
VIGOR VI V5034-200 - Impact wrench extension V5034-200, 3/4 inch square, 200 mm
45.3 EUR
"Impact wrench extension- Material: Cr-Mo
- Drive: 3/4 inch (20 mm) square
- Output: 3/4 inch (20 mm) square
- Dimensions: 200 mm
- For machine operation
VIGOR VI V5034-100 - Impact wrench extension V5034-100, 3/4 inch square, 100 mm
40.44 EUR
"Impact wrench extension- Material: Cr-Mo
- Drive: 3/4 inch (20 mm) square
- Output: 3/4 inch (20 mm) square
- Dimensions: 100 mm
- For machine operation
SCHIEFER LIGHTING SCHI 950944500 - T1 3/4 MG 5.7x16, 28 V, 40 mA, C2F, 7K hrs, clear - 388
10.77 EUR
T1 3/4 midget grooved 5.7x16 mm, 28 V, 40 mA, C2F, 7000 hours, clear - reference: 388
VIGOR VI V5034-400 - Impact wrench extension V5034-400, 3/4 inch square, 400 mm
52.28 EUR
"Impact wrench extension- Material: Cr-Mo
- Drive: 3/4 inch (20 mm) square
- Output: 3/4 inch (20 mm) square
- Dimensions: 400 mm
- For machine operation
UNI-TREND UT DP3305S-E - Laboratory power supply DP3305S-E, 0 - 30 V, 0 - 3 A, 328 W, 4 c
418.06 EUR
"The UDP3000S series is a powerful programmable linear DC power supply. It has a clear LCD user interface, outstanding features, a wide range of analytical functions and communication interfaces. This series meets the diverse testing requirements of users. It is designed to provide cost-effective programmable DC power supplies for use in teaching, scientific research, industrial applications and other areas.Technical data
- Channels: 4
- Output voltage: channel 1/channel 2: 0 - 30 V, channel 3: 0-6 V, channel 4: 5 V
- Output current: channel 1/channel 2: 0 - 5 A, channel 3: 0 - 3 A, channel 4: 2 A.
- Total power: 328 W
- Max. vertical resolution: 10 mV
- Max. A resolution: 1 mA
- Connectivity: USB device, RS232, LAN, USB host, digital I/O
- Adjustment accuracy: <0.3% +20 mV <0.2% +5 mA
- Type: linear DC power supply unit
VIGOR "VI V7920-EPR5 - V7920-EPR5 socket, 1 piece 1/4"" (6.3 mm)"
15.32 EUR
"VIGOR V7920-EPR5 socket, 1 piece 1/4"" (6.3 mm)"
VIGOR "VI V7920-EPR4 - V7920-EPR4 socket, 1 piece 1/4"" (6.3 mm)"
15.32 EUR
"VIGOR V7920-EPR4 socket, 1 piece 1/4"" (6.3 mm)"
VIGOR "VI V7920-EPR7 - V7920-EPR7 socket, 1 piece 1/4"" (6.3 mm)"
15.32 EUR
"VIGOR V7920-EPR7 socket, 1 piece 1/4"" (6.3 mm)"
VIGOR "VI V7920-EPR8 - V7920-EPR8 socket, 1 piece, 1/4"" (6.3 mm)"
15.32 EUR
"VIGOR V7920-EPR8 socket, 1 piece, 1/4"" (6.3 mm)"
VIGOR "VI V7920-EPR6 - V7920-EPR6 socket, 1 piece, 1/4"" (6.3 mm)"
15.32 EUR
"VIGOR V7920-EPR6 socket, 1 piece, 1/4"" (6.3 mm)"
SCHIEFER LIGHTING SCHI 80930400 - T1 3/4 E5/8 5.7x16, 12 V, 100 mA, C2F, 2K hrs, clear
10.81 EUR
T1 3/4 E5/8 5.7x16 mm, 12 V, 100 mA, C2F, 2000 hours, clear
GW-INSTEK GPE-4323A - Labornetzgerät, 212 W, 0 - 32 V, 0 - 3 A, 4 Kanal, DC
487.69 EUR
"GPE-X323A Series Multiple Output Linear D.C. Power SupplyThe GPE-X323A series DC power supply is the latest iteration of the GPE-X323 series, building upon its proven quality and reputation. This upgraded model refines precision with an encoder switch for more accurate voltage and current adjustments. Additionally, the digital control system has been streamlined-reducing six rotary knobs to just two-enhancing the front panel's simplicity and ease of operation.
A key improvement in this iteration is the overvoltage protection (OVP). Unlike the previous GPE series, which relied on a single maximum voltage threshold for activation, the new A series allows independent OVP voltage settings for each channel: CH1/CH2: 1 V to 36 V: CH3: 5.5 V (GPE-3323A): 1 V to 6 V (GPE-4323A): CH4: 1 V to 16 V (GPE-4323A).
These refinements make the A series a more flexible and precise for multi-channel applications.
Tracking Series / Parallel Operational
In addition to independent output channels, the GPE-X323A series provides automatic tracking series and parallel connection function. The series and parallel connections allow power supplies to output 32 V/6 A (Parallel connection) and 64 V/3 A (Series connection). The CH1 and CH2 of GPE-2323A / GPE-3323A / GPE-4323A models operate the series and parallel connection function.
key Lock
When performing a long reliability experiment or the user temporarily leaves the experiment site, if others change the power settings, it may cause the experiment to be interrupted or the DUT to be damaged. The user can activate the key lock to ensure that the experiment is not affected by others.
Remote Control (Remote I/O) for Output On / Off Function
The GPE-X323A series provides the Output On/Off function to prevent DUTs from unnecessary damages caused by the pre-output when connecting a DUT with a power supply. Users must preset voltage and current parameters and ensure that all connections are correct. Then, via manual control on the front panel, users can activate the Output On/Off.
Features
- 2 / 3 / 4 Independent Isolated Output
- 4.3 Inch LCD Display
- Recovery Time < 100 µs (50 % load change, minimum load 0.5 A)
- Setting & Readback Resolution 10 mV / 1 mA
- Output ON/OFF
- Analog Control (Remote I/O) for Output ON / OFF
- Key Lock Function
- Tracking series and parallel operation
- Optional European Jack Type Terminal
SCHIEFER LIGHTING SCHI 950938600 - T1 3/4 MG 5.7x16, 24 V, 50 mA, C2F, 10K hrs, clear
10.93 EUR
T1 3/4 midget grooved 5.7x16 mm, 24 V, 50 mA, C2F, 10,000 hours, clear
PYLON US3000C - Pylontech US3000C 3.5 kWh, LiFePO4, 48V
950.37 EUR
"The US3000C (MPN US3000C) is a lithium storage device of the latest generation. The storage tank has been specially designed to fully meet the high demands placed on a solar storage tank today. Maximum safety and long life are guaranteed even with regular deep discharge thanks to the latest technology.The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (BMS) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible with many available inverters and certified...
- Extremely cycle resistant - over 6000 cycles at 95% DoD
- Lifetime over 10 years
- Absolutely intrinsically safe lithium technology
- Compatible with many available inverters
- Automatic address setting when connected in multi-groups
- High charge and discharge performance possible
- Integrated BMS
- Very high storage density - light weight and compact design
- Easy installation thanks to modular design
- Absolutely maintenance-free and durable
- Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery
- Dual active protection at BMS level
- Supports WakeUp by 5-12V signal from RJ45 port
- Pre-charge function to protect the ESS system from overvoltage function
Battery management system in each module
The battery management system integrated into each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure.
Protection against:
- Deep discharge and overcharge
- overvoltage during charging
- excessive currents during charging and discharging
- over- and undertemperature
- short circuit and reverse polarity
Constant monitoring of the individual cell voltages (cell balance).
Modular designThe system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS.
High cycle lifeThe extremely high cycle life of the installed LiFePo4 cells make Pylontech US2000C modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-tied or stand-alone, Pylontech storage offers several advantages over typical lead-acid batteries and other lithium technologies.
Technical Data
- Battery type: Lithium iron phosphate (LiFePo4)
- Rated voltage: 48 V
- Rated capacity: 3552 Wh
- Usable capacity (95%...
MEAN WELL MW GST36B05-P1J - Desktop power supply unit, 21.5 W, 5 V, 4.3 A
28.87 EUR
Features:LPS
Operating conditions:
MTBF: 692,300 h
Operating expectancy: 30,000 hours
Operating temperature: -30°C - 70°C
Input
Mains frequency: 47 Hz - 63 Hz
DC input voltage: 85 V - 264 V
Input current: 0.45 A
Efficiency: 82%
Idle power: less than 0.075 W
Leakage current: max.: 0.25 mA
Inrush current: max. 70 A
Connection type, input: IEC-320 C8
Output
Number of outputs: 1
Output power: 21.5 W
Output voltage: 5 V
Output voltage selectable: no
Output current: 4.3 A
Overload protection: yes
Overload protection version: Hiccup
Short-circuit protection: yes
Over-voltage protection: yes
Overheating protection: no
Connection type, output: 5.5 x 2.1 mm DC power plug
Power cable length, output: 100 cm
Security
Protection rating: -
Protection class: II
Medical protection classification: -
Dimensions LxWxH: 79 mm x 54 mm x 33 mm
Weight: 203 g
CAMDENBOSS CB CSM30530D - V3 Microswitch 5A Long Lever 4.8mm Q-C Terminals
11.35 EUR
"- 5A schaltend S.P.D.T.
- langlebiger Spiralfedermechanismus
- Knopf-, Hebel- oder Rollenbetätiger
- UL-Zulassung
EN UL 4XAAA - Energizer lithium battery, 4x LR3, 1.5 V
21.94 EUR
Energizer Ultimate LithiumSuper-premium lithium battery. The world's most durable and technically advanced batteries thanks to unique lithium technology. Ideal for high-tech devices that use a lot of power, such as digital cameras, MP3 players, keyboards, PC mice, GPS devices etc. Excellent performance even at extreme temperatures (from -40°C to +60°C). Can now be stored for up to 20 years.
Type: Micro, AAA
Technology: lithium
Voltage: 1.5 V
Capacity: 1250 mAh
Content: 4 pieces
Compatible with:
Micro/AAA/4003/LR03/MN2400/X92/AM-4
V-TAC VT-21132 - LED compact lamp G4, 3.2 W, 385 lm, 4000 K
12.6 EUR
"High-quality SMD Samsung chip technology for better reliability- Hours of use, longer life than standard halogen lamps
- Replaces old halogen lamps
- Easy to install, designed with G4 base
- Applications - hotels, bars, commercial and private lighting and exhibition stands etc.
OPTONICA OPT AC6029 - Emergency Battery 3.6 V/4.5 Ah for LED Panels
46.12 EUR
Emergency power pack for reliable emergency power supply of LED panelsThe new OPTONICA LED emergency power supply (3.6 V/4.5 Ah) serves as a backup battery for LED panels. The emergency battery is also connected to the power supply of the LED panels and thereby charged. If a power failure occurs due to a fault, the emergency power supply will automatically take over the power supply of the LED panel and supply it with the necessary energy for up to 3 hours.
The emergency battery has been specially designed for OPTONICA LED panels with the following item numbers:
OPT DL2731
OPT DL2732
OPT DL2733
OPT DL2734
OPT DL2735
OPT DL2736
GW-INSTEK GPS-4303 - Linear DC Power Supply, 4 Ch, 3 A, 30 V
452.28 EUR
"The GPS-Series are 2-4 channel, 180 to 200W output, linear DC power supplies. Overload and reverse polarity protection, and an output on/off switch keep the GPS-Series and their load safe from unexpected conditions. A High regulation (0.01%+3mV) and low ripple/noise (< 1mVrms, 5Hz~1MHz) are maintained for channel 1 and 2 in constant voltage mode. Automated cooling fan speed control minimizes fan noise according to load conditions, ensuring quiet operation. The GPS-Series are an ideal solution for lightweight, inexpensive bench-top or portable applications requiring high regulation and multiple outputs.Features
- 4 seperated output
- Four ""3 Digits"" LED displays
- 0,01% Load and input voltage change
- Output voltage: 0 - 30 V DC (CH1, CH2), 2,2 - 5,2 V DC (CH3), 8 - 15 V DC (CH4)
- Output current: 0 - 3 A
- low ripple and noise
- Tracking mode and Auto series / parallel operation
- output EIN / AUS-switch
- Fan speed control circuit to minimize fan noise
- Overload and reverse polarity protection
delivery content
power supply, manual, power cord, measurment cables"
V'ARIÉTAL VARICOLOR Cream Color 120 ml 3/4 dunkelbraun rot
15.31 EUR
Cream hair color with Shea Oil. The valuable and natural Shea Oil gives the hair an extra portion of care already during coloring for a brilliant color result. Intensive, long-lasting color results with exceptional luminosity.lightening up to 3 tones, extra blond tones 4-5 nuanceup to 100% coverage on gray hairoptimal protection due to caring substancesexcellent adhesion to the roots due to creamy consistencyall shades are intermixable Delivery in new packaging possible. However, the product formula is unchanged. Mixed shades should only be added to a V'ariétal cream hair color in grams. Mixed shades should not be dyed pure. Please always follow the instructions for use to achieve the optimum color result.
