SALICRU SALI 693CA000001 - UPS, 650 VA / 360 W

111.81 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
SPS 650 HOME
Input
Output
Ideal multi-plug solution for office and home environments
Salicru's SPS HOME series uninterruptible power supplies (UPS) with offline technology have a flexible basic design with 6 outlets and capacity to protect loads with power correction factor (APFC).
User-friendly and compatible
All sockets are aligned to conveniently connect supply transformers, and feature contact protection via orifice plates.
To complete the protection, they also have RJ45 jacks for telephone line/ADSL/Ethernet protection against power surges and/or electrical noise.
Management via USB
And to allow the management and control of the UPS, the USB interface embeds the HID protocol that allows the configuration of parameters and the controlled shutdown/standby of the computer.
Also there is the option of software packages for monitoring and controlled closing of files for Windows, Linux and Mac.
Batteries
Standards
EAN: 8436035922512
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
SPS 650 HOME
- Technology: Off-line
- Design: Flexible basic design
Input
- Nominal voltage: 230 V
- Voltage tolerance: 180 - 270 V
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Automatic detection frequency: Yes
- Protection: Resettable thermal switch
Output
- 4x protective contact (protection + UPS)
- 2x protective contact (protection only)
- 2x RJ45 for telephone / fax (10/100)
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±7%
- Power (VA/W): 650 / 360
- Waveform (battery mode): pseudosinusoidal
- Frequency: 50 / 60 Hz (corresponds to input)
- Precision frequency (battery mode): ±1Hz
- Transmission time: 4 ms (typical)
- Compatible with APFC loads: yes
Ideal multi-plug solution for office and home environments
Salicru's SPS HOME series uninterruptible power supplies (UPS) with offline technology have a flexible basic design with 6 outlets and capacity to protect loads with power correction factor (APFC).
User-friendly and compatible
All sockets are aligned to conveniently connect supply transformers, and feature contact protection via orifice plates.
To complete the protection, they also have RJ45 jacks for telephone line/ADSL/Ethernet protection against power surges and/or electrical noise.
Management via USB
And to allow the management and control of the UPS, the USB interface embeds the HID protocol that allows the configuration of parameters and the controlled shutdown/standby of the computer.
Also there is the option of software packages for monitoring and controlled closing of files for Windows, Linux and Mac.
Batteries
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge time: 8 hours to 90%
- Battery can be replaced by user: Yes
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN 62040-2
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001
EAN: 8436035922512
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

- Technology: Line - interactive
- Design: tower
Input
- Nominal voltage: 230 V
- Voltage tolerance: 162 - 290 V
- Stabilizer: AVR (Buck & Boost)
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Automatic Detection Frequency: Yes
- Protection: Resettable thermal switch
Output
- 2x safety contact
- 2x USB
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±10%
- Power (VA/W): 650 / 360
- Power (VA): 650
- Waveform (battery mode): pseudosinusoidal
- Frequency: 50 / 60 Hz (automatic detection)
- Precision frequency (battery mode): ±1Hz
- Compatible with APFC loads: yes
Optimal electrical protection for office environments and office systems
Salicru's SPS SOHO+ series of uninterruptible power supplies (UPS/UPS) offer Line-Interactive technology, compatibility with Active Power Factor Correction (APFC) loads, and a dual front-panel USB charger as their most notable benefits
The Line-Interactive technology is based on an automatic AVR voltage regulator (buck/boost).
This reduces any fluctuations in the input voltage and at the same time causes less use of the batteries, thus extending their life.
Therefore, the UPS has maximum autonomy in case of need.
In addition, this series counts on a USB interface with HID protocol for control, configuration of parameters and for controlled shutdown/standby of the computer.
Also available is a software package for monitoring and managing the assigned environments, including for virtual systems.
Batteries
- Protection: against deep discharge, against short circuit by fuse
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge time: 2 - 4 hours to 90%
Communication
- Ports: USB (HID protocol)
- Monitoring software: For Windows, Linux and Mac
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, after the backup time of the battery is over
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-62040-2
- Operation: EN-62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: line-interactive
- Design: tower
Input
- Nominal voltage: 220 V / 230 V / 240 V AC
- Voltage tolerance: up to 162 V - 290 V
- Stabilizer: AVR Buck / Boost
- Nominal frequency: 50 / 60 Hz
- Automatic detection frequency: Yes
- Protection: circuit breaker
Output
- 2x protective contact
- Nominal voltage: 220 V / 230 V / 240 V AC
- Precision voltage (battery mode): ±10%
- Power (VA): 700
- Waveform (battery mode): modified sine wave
- Frequency: 50 / 60 Hz ± 1 Hz (1)
- Transmission time: 2 / 6 ms
The best electrical protection for domestic and professional office equipment
Salicru's SPS ONE series, an uninterruptible power supply system (UPS/UPS) in mini-tower format of line-interactive type, enables battery backup (with pseudo-sinusoidal inverter output) and protection against overloads.
During voltage interruptions, the SPS ONE units provide battery backup to perform a proper shutdown of the IT system and protect it against data loss and damage to the electronics.
Operation via automatic voltage regulation (AVR) to correct small voltage fluctuations without having to use the battery, thus extending its useful life.
The AVR function is essential in areas where voltage fluctuations occur frequently.
Integrates a UPS/PC communication interface of the USB type with HID protocol, allowing configuration of parameters, control of the UPS and shutdown and standby of the computer through the USB port.
Compatible with operating systems-Windows, Linux and Mac.
The software for monitoring and managing the UPS and closing files and applications for Windows, Linux and Mac operating systems is available for free download from www.salicru.com.
Batteries
- Battery type: lead/calcium, maintenance-free, sealed, design life 3-5 years
- Charge time: 4-6 hours to 90% of capacity
- Battery can be replaced by user: Yes
- Runtime: Up to 20 minutes
- Battery replacement and privacy: Yes
- Communication
- Ports: USB HID
- Monitoring software: For Windows, Mac, Linux and UNIX
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, when mains power is applied
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-IEC 62040-12
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: Off-line
- Design: Flexible basic design
Input
- Nominal voltage: 230 V
- Voltage tolerance: 180 - 270 V
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Automatic detection frequency: Yes
- Protection: Resettable thermal switch
Output
- 4x protective contact (protection + UPS)
- 2x protective contact (protection only)
- 2x RJ45 for telephone / fax (10/100)
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±7%
- Power (VA/W): 850 / 490
- Waveform (battery mode): pseudosinusoidal
- Frequency: 50 / 60 Hz (corresponds to input)
- Precision frequency (battery mode): ±1Hz
- Transmission time: 4 ms (typical)
- Compatible with APFC loads: yes
Ideal multi-plug solution for office and home environments
Salicru's SPS HOME series uninterruptible power supplies (UPS) with offline technology have a flexible basic design with 6 outlets and capacity to protect loads with power correction factor (APFC).
User-friendly and compatible
All sockets are aligned to conveniently connect supply transformers, and feature contact protection via orifice plates.
To complete the protection, they also have RJ45 jacks for telephone line/ADSL/Ethernet protection against power surges and/or electrical noise.
Management via USB
And to allow the management and control of the UPS, the USB interface embeds the HID protocol that allows the configuration of parameters and the controlled shutdown/standby of the computer.
Also there is the option of software packages for monitoring and controlled closing of files for Windows, Linux and Mac.
Batteries
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge time: 8 hours to 90%
- Battery can be replaced by user: Yes
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN 62040-2
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: Line-interactive
- Design: tower
Input
- Nominal voltage: 220 V / 230 V / 240 V AC
- Voltage tolerance: up to 162 V - 290 V
- Stabilizer: AVR Buck / Boost
- Nominal frequency: 50 / 60 Hz
- Automatic detection frequency: Yes
- Protection: circuit breaker
Output
- 4x protective contact
- Nominal voltage: 220 V / 230 V / 240 V AC
- Precision voltage (battery mode): ±10%
- Power (VA): 1500
- Waveform (battery mode): modified sine wave
- Frequency: 50 / 60 Hz ± 1 Hz (1)
- Transmission time: 2 / 6 ms
The best electrical protection for domestic and professional office equipment
Salicru's SPS ONE series, an uninterruptible power supply system (UPS/UPS) in mini-tower format of line-interactive type, enables battery backup (with pseudo-sinusoidal inverter output) and protection against overloads.
During voltage interruptions, the SPS ONE units provide battery backup to perform a proper shutdown of the IT system and protect it against data loss and damage to the electronics.
Operation via automatic voltage regulation (AVR) to correct small voltage fluctuations without having to use the battery, thus extending its useful life.
The AVR function is essential in areas where voltage fluctuations occur frequently.
Integrates a UPS/PC communication interface of the USB type with HID protocol, allowing configuration of parameters, control of the UPS and shutdown and standby of the computer through the USB port.
Compatible with operating systems-Windows, Linux and Mac.
The software for monitoring and managing the UPS and closing files and applications for Windows, Linux and Mac operating systems is available for free download from www.salicru.com.
Batteries
- Battery type: lead/calcium, maintenance-free, sealed, design life 3-5 years
- Charge time: 4-6 hours to 90% of capacity
- Battery can be replaced by user: Yes
- Runtime: Up to 20 minutes
- Battery replacement and privacy: Yes
- Communication
- Ports: USB HID
- Monitoring software: For Windows, Mac, Linux and UNIX
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, when mains power is applied
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-IEC 62040-12
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: Line - interactive
- Design: tower
Input
- Nominal voltage: 230 V
- Voltage tolerance: 162 - 290 V
- Stabilizer: AVR (Buck & Boost)
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Automatic Detection Frequency: Yes
- Protection: Resettable thermal switch
Output
- 2x safety contact
- 2x USB
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±10%
- Power (VA/W): 500 / 300
- Power (VA): 500
- Waveform (battery mode): pseudosinusoidal
- Frequency: 50 / 60 Hz (automatic detection)
- Precision frequency (battery mode): ±1Hz
- Compatible with APFC loads: yes
Optimal electrical protection for office environments and office systems
Salicru's SPS SOHO+ series of uninterruptible power supplies (UPS/UPS) offer Line-Interactive technology, compatibility with Active Power Factor Correction (APFC) loads, and a dual front-panel USB charger as their most notable benefits
The Line-Interactive technology is based on an automatic AVR voltage regulator (buck/boost).
This reduces any fluctuations in the input voltage and at the same time causes less use of the batteries, thus extending their life.
Therefore, the UPS has maximum autonomy in case of need.
In addition, this series counts on a USB interface with HID protocol for control, configuration of parameters and for controlled shutdown/standby of the computer.
Also available is a software package for monitoring and managing the assigned environments, including for virtual systems.
Batteries
- Protection: against deep discharge, against short circuit by fuse
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge time: 2 - 4 hours to 90%
Communication
- Ports: USB (HID protocol)
- Monitoring software: For Windows, Linux and Mac
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, after the backup time of the battery is over
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-62040-2
- Operation: EN-62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: Line-interactive
- Design: tower
Input
- Nominal voltage: 220 V / 230 V / 240 V AC
- Voltage tolerance: up to 162 V - 290 V
- Stabilizer: AVR Buck / Boost
- Nominal frequency: 50 / 60 Hz
- Automatic detection frequency: Yes
- Protection: circuit breaker
Output
- 2x protective contact
- Nominal voltage: 220 V / 230 V / 240 V AC
- Precision voltage (battery mode): ±10%
- Power (VA): 500
- Waveform (battery mode): modified sine wave
- Frequency: 50 / 60 Hz ± 1 Hz (1)
- Transmission time: 2 / 6 ms
The best electrical protection for domestic and professional office equipment
Salicru's SPS ONE series, an uninterruptible power supply system (UPS/UPS) in mini-tower format of line-interactive type, enables battery backup (with pseudo-sinusoidal inverter output) and protection against overloads.
During the voltage interruptions, the SPS ONE units provide a battery backup to perform a proper shutdown of the IT system and protect it against the loss of data and damage to the electronics.
Operation via automatic voltage regulation (AVR) to correct small voltage fluctuations without having to use the battery, thus extending its useful life.
The AVR function is essential in areas where voltage fluctuations occur frequently.
Integrates a UPS/PC communication interface of the USB type with HID protocol, allowing configuration of parameters, control of the UPS and shutdown and standby of the computer through the USB port.
Compatible with operating systems-Windows, Linux and Mac.
The software for monitoring and managing the UPS and closing files and applications for Windows, Linux and Mac operating systems is available for free download from www.salicru.com.
Batteries
- Battery type: lead/calcium, maintenance-free, sealed, design life 3-5 years
- Charge time: 4-6 hours to 90% of capacity
- Battery can be replaced by user: Yes
- Runtime: Up to 20 minutes
- Battery replacement and privacy: Yes
- Communication
- Ports: USB HID
- Monitoring software: For Windows, Mac, Linux and UNIX
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, when mains power is applied
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-IEC 62040-12
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: Line - interactive
- Design: tower
Input
- Nominal voltage: 230 V
- Voltage tolerance: 162 - 290 V
- Stabilizer: AVR (Buck & Boost)
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Automatic Detection Frequency: Yes
- Protection: Resettable thermal switch
Output
- 2x safety contact
- 2x USB
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±10%
- Power (VA/W): 850 / 480
- Power (VA): 650
- Waveform (battery mode): pseudosinusoidal
- Frequency: 50 / 60 Hz (automatic detection)
- Precision frequency (battery mode): ±1Hz
- Compatible with APFC loads: yes
Optimal electrical protection for office environments and office systems
Salicru's SPS SOHO+ series of uninterruptible power supplies (UPS/UPS) offer Line-Interactive technology, compatibility with Active Power Factor Correction (APFC) loads, and a dual front-panel USB charger as their most notable benefits
The Line-Interactive technology is based on an automatic AVR voltage regulator (buck/boost).
This reduces any fluctuations in the input voltage and at the same time causes less use of the batteries, thus extending their life.
Therefore, the UPS has maximum autonomy in case of need.
In addition, this series counts on a USB interface with HID protocol for control, configuration of parameters and for controlled shutdown/standby of the computer.
Also available is a software package for monitoring and managing the assigned environments, including for virtual systems.
Batteries
- Protection: against deep discharge, against short circuit by fuse
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge time: 2 - 4 hours to 90%
Communication
- Ports: USB (HID protocol)
- Monitoring software: For Windows, Linux and Mac
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, after the backup time of the battery is over
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-62040-2
- Operation: EN-62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: Line-interactive
- Design: tower
Input
- Nominal voltage: 230 V
- Voltage range 100% load: 165 - 290 V
- Stabilizer: AVR (Buck & Boost)
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Frequency range: ±5 Hz
- Automatic detection frequency: Yes
- Protection: Resettable thermal switch
Output
- 6x IEC C13
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±10%
- Power (VA/W): 850 / 595
- Total harmonic distortion (THDv): <5%
- Waveform (battery mode): pure sine waves
- Frequency: 50 / 60 Hz (corresponds to input)
- Precision frequency (battery mode): ±1 Hz
- Compatible with APFC loads: Yes (1)
- Performance stabilizer mode (AVR): >92%
- Battery mode performance: >80%
- Allowable overloads in battery mode: 110% during 1 min / > 130% immediately
- Allowable overloads in-line mode: 110% 1min / 120% instantaneous
Reliable tower-type protection for computer rooms
Salicru's SPS ADVANCE T series, as UPS/UPS (Uninterruptible Power Supply) solution, offers efficiency and reliability levels for all critical devices that require continuity and reliability in power supply.
They have a very compact tower design to save space in server and computer rooms.
With line-interactive technology, possible fluctuations in the supply network are eliminated with an output voltage that is always sinusoidal with the highest quality to supply all sensitive loads.
For easier and more convenient use, it had, on the one hand, a display with all the information about the operation of the device and the power supply (input/output voltage, % load, % battery, ...) and, on the other hand, extensive communication options with the outside room through USB interface with HID protocol, the monitoring and management software (downloadable) or the communication options through the intelligent integrated slot (SNMP).
Batteries
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge type: I/U (Constant current / Constant voltage)
- Charge time: 4 hours to 90%
- Battery test: Automatic at each startup + manual
Communication
- Ports: RS-232 / USB (HID)
- Intelligent slot: slot for SNMP / dry contacts / MODBUS
- Monitoring software: For Windows, Linux and Mac
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN 62040-2
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: Line-interactive
- Design: tower
Input
- Nominal voltage: 230 V
- Voltage range 100% load: 165 - 290 V
- Stabilizer: AVR (Buck & Boost)
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Frequency range: ±5 Hz
- Automatic detection frequency: Yes
- Protection: Resettable thermal switch
Output
- 6x IEC C13
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±10%
- Power (VA/W): 2000 / 1400
- Total harmonic distortion (THDv): <5%
- Waveform (battery mode): pure sine waves
- Frequency: 50 / 60 Hz (corresponds to input)
- Precision frequency (battery mode): ±1 Hz
- Compatible with APFC loads: Yes (1)
- Performance stabilizer mode (AVR): >92%
- Battery mode performance: >80%
- Allowable overloads in battery mode: 110% during 1 min / > 130% immediately
- Allowable overloads in-line mode: 110% 1min / 120% instantaneous
Reliable tower-type protection for computer rooms
Salicru's SPS ADVANCE T series, as UPS/UPS (Uninterruptible Power Supply) solution, offers efficiency and reliability levels for all critical devices that require continuity and reliability in power supply.
They have a very compact tower design to save space in server and computer rooms.
With line-interactive technology, possible fluctuations in the supply network are eliminated with an output voltage that is always sinusoidal with the highest quality to supply all sensitive loads.
For easier and more convenient use, it had, on the one hand, a display with all the information about the operation of the device and the power supply (input/output voltage, % load, % battery, ...) and, on the other hand, extensive communication options with the outside room through USB interface with HID protocol, the monitoring and management software (downloadable) or the communication options through the intelligent integrated slot (SNMP).
Batteries
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge type: I/U (Constant current / Constant voltage)
- Charge time: 4 hours to 90%
- Battery test: Automatic at each startup + manual
Communication
- Ports: RS-232 / USB (HID)
- Intelligent slot: slot for SNMP / dry contacts / MODBUS
- Monitoring software: For Windows, Linux and Mac
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN 62040-2
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

The Conceptronic UPS offers long-lasting, reliable emergency power supply for small and home offices. The device features straightforward installation and operation, providing a simple and safe way to protect your systems from dangerous surges and power outages. The UPS is equipped with modem/LAN protection, a powerful microprocessor and a fault indicator that warns of dangerous wiring. Thanks to its elegant, compact design, the UPS is ideal for the limited workspace in small and home offices.
Technical specifications
- UPS topology: Standby (offline)
- Output capacity: 0.65 kVA
- Output power: 360 W
- Input operating voltage (min): 220 V
- Input operating voltage (max): 240 V
- Output operating voltage (min): 220 V
- Output operating voltage (max): 240 V
- Audible signals: Yes
- Audible alarm modes: Alarm on battery operation, fault, low battery warning, overload alarm
- Auto restart: Yes
- AC plug types: Type F
- Number of AC outputs: 6
- Battery charging time (90 %): 8 h
- Form factor: Compact
- Product color: Black
- LED indicators: Yes
- Operating temperature: 0 - 40 °C
- Operating relative humidity: 10 - 90%
- Width: 110 mm
- Depth: 309 mm
- Height: 84 mm
- Weight: 2.76 kg
- Quick installation guide

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a...

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 4x Earthed socket outlet
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

General Data:
- 650 VA / 400 W.
- 165 - 285 V.
- 5 min battery life at 70% load
- USB port
- Eaton UPS companion software on CD ROM
- Line-Interactive Technology
- Replaceable, sealed batteries
- 3 cold appliance sockets with surge protection and backup
- 1 cold appliance sockets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Advanced protection for:
- Workstations
- Network Devices
- Peripherals
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040-2
- CB Report
- CE mark
On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.
The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 15% can be achieved.
By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.
The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.
Further technical details can be found in the data sheet.

APC™ Back-UPS™ BX series is a cost effective power protection solution for home and home office environments.
Input:
- Nominal Input Voltage: 230V
- Input Connections: IEC 60320 C14
Output:
- Output power capacity: 650 Watts / 1.2kVA
- Output Connections: (6) IEC 60320 C13 (Battery Backup)
- Nominal Output Voltage: 230V
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Ideal Power Protection for the following environments and devices:
- Home Office
- Modem / Router
- PC Desktop Computer
- PC Monitor
- Network-attached Storage (NAS)
- Home Entertainment
- Modem / Router
- TV Box
- Television
- Music Speaker
- Smart Home
- Modem / Router
- Smart Speaker
- Home Security/Surveillance Camera

113.3 EUR APC EASY UPS BV 650VA, AVR, Schutzkonakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 375Watts / 650VA
- Max Configurable Power (Watts): 375Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of...

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 6x IEC C13
- 230 V AC
- 1200 VA / 650 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

General Data:
- 650 VA / 400 W.
- 165 - 285 V.
- 5 min battery life at 70% load
- USB port
- Eaton UPS companion software on CD ROM
- Line-Interactive Technology
- Replaceable, sealed batteries
- 3 outlets with surge protection and backup
- 1 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Advanced protection for:
- Workstations
- Network Devices
- Peripherals
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040-2
- CB Report
- CE mark
On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.
The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 15% can be achieved.
By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.
The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.
Further technical details can be found in the data sheet.

BRICs LCD Series
The models of the BRICs LCD Series offer next outputs for reliable uninterrupted power supply even more outputs with filter against power surges and voltage spikes and a data and communication line protection. The built-in automatic voltage regulation AVR)ensures a constant output voltage during power fluctuations.
An LCD display and a integrated USB charger make it the first choice in a home or small business environments - where they can be flexibly mounted on table or wall.
- Line-Interactive Technology
- GreenPower UPS™ energy saving technology
- Automatic Voltage Regulation
- EMI, RFI, lightning and surge protection
- Cellular Data Line Protection
- Auto restart / Auto charge
- LCD status display
- USB interface
- USB charger
- 5-year battery (EUROBAT)
- Battery replacement by user
- Wall-mountable
- Cable management
The free PowerPanel Personal Edition Software download can be found at the CyberPower website.

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x IEC C14
- 220 - 240 V AC
Output:
- 4x IEC C13
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

The APC by Schneider Electric Easy UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business.
This UPS supply battery backup during outages and unstable voltage fluctuations, as well as provide protection from damaging surges and spikes.
They are the choice helps to protect your data and keep you connected.
Input:
- 1x Power cord
- 220 - 240 V AC
Output:
- 2x Earthed socket outlet
- 230 V AC
- 700 VA / 360 W
Automatic Voltage Regulation (AVR)
Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels.
This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut.
The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted.
Quick Mute
The Easy UPS is able to temporarily mute user correctable audible alarms such as On Battery.
During such audible alarms, a short press (less than 2 seconds) of the POWER button will temporarily mute the audible alarm until the condition has been reset.
A short double beep will confirm that Quick Mute has been activated. Pressing the POWER button for more than 2 seconds will turn off the UPS.
Other events such as Battery replacement and Charger notification can not be temporarily muted.
The unit in these cases must be turned off.

Battery Backup & Surge Protector for Electronics and Computers
Output
- Output power capacity: 400Watts / 650VA
- Max Configurable Power (Watts): 400Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 47 - 63 Hz
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Standby
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (3) IEC 320 C13 (Battery Backup) + (2) IEC Jumpers + (1) IEC 320 C13
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 47 - 63 Hz, 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 180 - 266V
- Input voltage adjustable range for mains operation: 160 - 286V
- Number of Power Cords: 2
- Maximum Input Current: 7.0A
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
LED status display
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Approvals:
A-tick, C-tick, CE, GOST, NEMKO
Direct service!
• Free customer hotline: 0800 101 00 67

High Performance Computer and Electronics UPS for Premium Power Protection
Output
- Output power capacity: 390Watts / 650VA
- Max Configurable Power (Watts): 390Watts / 650VA
- Nominal Output Voltage: 230V
- Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 10ms typical : 12ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Input voltage range for main operations: 176 - 294V
- Maximum Input Current: 10.0A
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 12hour(s)
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
- Battery Volt-Amp-Hour Capacity: 75
Communications & Management
- Interface Port(s): USB
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Includes:
- USB cable
- User Manual

Battery Backup & Surge Protector for Electronics and Computers
Output
- Output power capacity: 400Watts / 650VA
- Max Configurable Power (Watts): 400Watts / 650VA
- Nominal Output Voltage: 230V
- Efficiency at Full Load: 80.0 %
- Output Frequency (sync to mains): 47 - 63 Hz
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Other Output Voltages: 220
- Topology: Standby
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (2) F CEE 7 (Surge Protection), (6) F CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 47 - 63 Hz
- Input Connections: F CEE 7/7P
- Cord Length: 1.83meters
- Input voltage range for main operations: 180 - 266V
- Efficiency at Full Load: 80.0 %
- Maximum Input Current: 6.0A
Batteries & Runtime
- Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Expected Battery Life (years): 2 - 5
- Battery Volt-Amp-Hour Capacity: 75
Communications & Management
- Interface Port(s): USB
- Control panel: LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators, LED status display with On Line : On Battery : Replace Battery and Overload indicators
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
- Surge energy rating: 310Joules
- Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensures...

General data:
- 650 VA / 400 W
- 184 - 264 V
- 6 min battery life at 70% load
- LED indicator and battery replacement alarm
- Replaceable, sealed batteries
- 3 sockets with surge protection and backup
- 1 sockets with overvoltage protection only
- Automatic battery test
- Resettable fuse
Ideal for the protection of:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP-Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE-Zeichen
In addition to a battery-backed power backup,
which keeps your equipment running even in the event of a power failure
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-power overvoltage protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines protects.
You can download a current version for safely controlling and shutting down the system here

General data:
- 650 VA / 400 W
- 184 - 264 V
- 6 min battery life at 70% load
- USB-Port
- LED indicator and battery replacement alarm
- Replaceable, sealed batteries
- 3 sockets with surge protection and backup
- 1 sockets with overvoltage protection only
- Automatic battery test
- Resettable fuse
Ideal for the protection of:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP-Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE-Zeichen
In addition to a battery-backed power backup,
which keeps your equipment running even in the event of a power failure
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-power overvoltage protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines protects.
Further technical details can be found in the attached data sheet.

The Nano UPS provides comprehensive protection in a compressed and efficient form.
The Nano UPS is compact and offers comprehensive protection against power failure or power peaks.
With Nano the power supply can be continued reliably, a safe shutdown of your pc during a power failure is possible.
The integrated microprocessor control guarantees high reliability.
Output:
- Slots: 2 x protective contact
- Voltage: 220 V nominal
- Frequency: 50 / 60 Hz
- Transfer time: typically 2-6 ms
- Curve progression (Batt. mode): Simulated sine wave
- Battery: 12 V / 7 AH x 1
Input:
- Slots: 1x IEC C14
- Input voltage: 180 ~ 270 V AC
- Frequency: 50 / 60 Hz
Characteristics:
- Compact size with stand and mounting flexibility
- Excellent microprocessor control guarantees high reliability
- Automatic restart during AC recovery
- Simulated sinusoidal curve
- cold start function
- Complete protection: discharge, overcharge, short circuit and thermal protection

- Energy Saving Technology
- LCD Status Display
- Hot-swappable Batteries
- Overload Protection
Input
- Nominal Input Voltage ( Vac ): 230
- Input Voltage Range ( Vac ): 165 ~ 271
- Input Frequency ( Hz ): 50 ± 3 / 60 ± 3
- Input Frequency Detection: Auto-sensing
- Rated Input Current ( A ): 10
- Input Connector Type: IEC C14
Output
- Capacity (VA): 600
- Capacity (Watts): 360
- On Battery Waveform: Simulated Sine Wave
- On Battery Voltage(s) ( Vac ): 230 ± 10%
- On Battery Frequency ( Hz ): 50 ± 1% / 60 ± 1%
- Power Factor: 0.6
- Automatic Voltage Regulation (AVR): Single Boost
- Overload Protection: Internal Current Limiting, Circuit Breaker
- Outlet(s) - Total: 6
- Outlet Type: IEC C13 x 6
- Outlet(s) - Battery & Surge Protected: 4
- Outlet(s) - Surge-Only Protected: 2
- Typical Transfer Time ( ms ): 4
CyberPower OR600ERM1U Line-Interactive UPS offers Simulated Sine Wave output power for office system devices including PCs, workstations, networking devices, and peripherals. It’s typically integrated in the back office, server room, and data center environment to ensure a reliable backup power supply during power failures.
In addition, the rackmount / tower convertible design gives it enhanced flexibility for installation and operation in almost any environment.
The UPS has a multifunction LCD display which offers real-time information, including input and output voltage levels, load and battery levels, battery runtime, overload warning, and a silent mode.
With the network ports on the UPS, it prevents network devices from being subjected to sudden power surges caused by lightning, thereby avoiding potential system damage.
As for battery maintenance, the UPS allows battery hot-swapping, which enables users to perform normal battery maintenance without significant interruption.
Package Content:
- OR600ERM1U UPS
- Rackmount Ears
- Power Cord
- USB Cable
- User's Manual

This mini-UPS is a powerful power bank for you as a home office employee, freelancer, self-employed and as a private person.
UPS systems prevent current-related data loss and ensure an uninterruptible power supply (UPS).
Annoying disconnections of important telephone calls and video conferences are a thing of the past.
The YUNTO Smile UPS reliably protects your networked devices in the home office and electronic devices in the private environment against mains disturbances and failure of the 230V power supply.
With an emergency power supply with overvoltage protection, the mini UPS offers you failure protection and reliably secures your remote workstations and devices.
Protected:
- Computer/PC and notebooks
- Router of telecommunication systems (TK) and modem
- docking station
- External storage systems for data backup
- NAS systems
- Access points and DECT telephones
- Electronic Systems
- Game consoles
In the event of a faulty or completely interrupted mains connection, YUNTO Smile UPSs continue to supply all connected devices reliably with power.
For protection, the mini UPS is simply plugged in between the socket and the device.
Via a UPS charging connection, the YUNTO Smile UPS can be used as a power bank.
In the LCD - display important information such as input and output voltage or the battery condition can be called up fast and comfortably over the status display.
Thanks to the easy handling and integrated protective contact sockets, the mini UPS YUNTO Smile is ideal for use in your home office and at home in a private environment.
- Nominal power: 600 VA / 360 W
- Bridging time at 50 % load: 5 min

A compact size with stand and mounting flexibility Off line UPS to provide the expected backup power for home, gaming or personal appliances.
- 600VA standby UPS
- Compact size for standalone and mounting flexibility
- Excellent microprocessor control ensures high reliability
- Automatic restart during AC recovery
- Simulated sine wave output
- Cold start function
Input
- 220 / 230 / 240 V AC
Output
- 220 / 230 / 240 V AC
- 6x protective contact
- 2x USB-A (5 V / 1 A)
- 1x RJ-11 (data line protection)
- 1x RJ-45 (data line protection)
- 1x USB (data line protection)

- Compact size
- Excellent microprocessor control ensures high reliability
- Boost and buck AVR for voltage stabilization
- Automatic restart upon AC recovery
- Provides simulated sine wave backup power to protect electrical equipment
- Off-mode charging
- Cold start function
- Generator compatible
Input
- 220 / 230 / 240 V AC
Output
- 220 / 230 / 240 V AC
- 2x protective contact
- 1x USB
- 2x RJ45

General Data:
- 1000 VA / 600 W.
- 175 - 275 V.
- 8 min battery life at 70% load
- HID-compatible USB port
- Line-Interactive Technology
- Replaceable Batteries
- 4 cold appliance sockets with surge protection and backup
- 4 cold appliance sockets with surge protection only
- Automatic Battery Test
Ideal for protecting:
- Workstations
- Business Telephony
- Network Devices
- Point-of-sale equipment
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040 -3
- CB Report
- CE mark
The Eaton 5S UPS provides effective power protection, even in high-noise electrical environments. Voltage fluctuations are automatically compensated by a voltage regulator (AVR, booster/fader) without using the batteries.
The 5S is not only a battery backup that keeps your equipment up and running even in the event of power outages, but also provides effective protection against harmful surges.
The 5S also protects your network equipment against voltage spikes coming through the back door via Ethernet, Internet or telephone lines.
Your regular battery self-test warns early if a battery replacement is necessary.
The easy-to-replace batteries help to prolong UPS life.
The 5S can be installed vertically above, on or under a table, or horizontally under a screen. Its compact, thin form factor allows it to easily integrate into space-constrained environments.
Further technical details can be found in the data sheet.

General Data:
- 1600 VA / 1000 W.
- 184 - 264 V.
- 6 min battery life at 70% load
- USB port
- Eaton Intelligent Power Software
- LED display and acoustic signal for battery replacement
- Replaceable, sealed batteries
- 4 outlets with surge protection and backup
- 4 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Ideal for protecting:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE mark
With their efficient electrical design and the EcoControl
Function (USB models), which peripherals automatically
Together with the master device, the will help you
Eaton Ellipse ECO, compared to previous-generation UPSs, up to
To save 25% energy.
In addition to a battery-backed power backup,
To keep your equipment in operation even in the event of a power failure,
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-performance surge protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines.
Through the HID-compatible interface is compatibility with all
Common operating systems also without additional drivers
guaranteed.
Further technical details can be found in the data sheet.

123.64 EUR APC EASY UPS BV 1000VA, AVR, Schutzkontakt Outlet, 230V
Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...

- Integrated automatic voltage regulator protects against voltage fluctuations
- Powerful microprocessor
- AC/Automatic restart
- DC voltage start
- Modem/LAN protection Provides
- HID compatible USB connection
The Conceptronic UPS provides long-lasting, reliable backup power for small and home offices. The device features straightforward installation and operation, providing a simple and safe way to protect your systems from dangerous surges and power outages. The UPS is equipped with modem/LAN protection, a powerful microprocessor and a fault indicator that warns of dangerous wiring. Thanks to its elegant, compact design, the UPS is ideal for the limited workspace in small and home offices.
Technical specifications
- UPS topology: Line-interactive
- Output capacity: 1.2 kVA
- Output power: 720 W
- Input operating voltage (min): 220 V
- Input operating voltage (max): 240 V
- Output operating voltage (min): 220 V
- Output operating voltage (max): 240 V
- Battery voltage: 24 V
- Battery charging time (90 %): 8 h
- Form factor: Compact
- Product color: Black
- Cooling: Active
- Built-in fan: Yes
- LED indicators: Yes
- Audible signals: Yes
- Audible alarm modes: Low battery alarm, Low battery warning, Overload alarm
- Auto restart: Yes
Scope of delivery:
- Output power cable
- USB cable
- Quick installation guide

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Cold-start capable
Provides temporary battery power when the utility power is out.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Serial connectivity
Provides management of the UPS via a serial port.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Provides remote power management of the UPS over the network.

BRICs LCD Series
The models of the BRICs LCD Series offer next outputs for reliable uninterrupted power supply even more outputs with filter against power surges and voltage spikes and a data and communication line protection. The built-in automatic voltage regulation AVR)ensures a constant output voltage during power fluctuations.
An LCD display and a integrated USB charger make it the first choice in a home or small business environments - where they can be flexibly mounted on table or wall.
- Line-Interactive Technology
- GreenPower UPS™ energy saving technology
- Automatic Voltage Regulation
- EMI, RFI, lightning and surge protection
- Cellular Data Line Protection
- Auto restart / Auto charge
- LCD status display
- USB interface
- USB charger
- 5-year battery (EUROBAT)
- Battery replacement by user
- Wall-mountable
- Cable management
The free PowerPanel Personal Edition Software download can be found at the CyberPower website.

- 1600 VA / 1000 Watt
- 8x IEC outputs: 4x overvoltage protection + battery backup, 4x overvoltage protection only
- Protection of the telephone/fax/modem line (RJ45)
- Display, USB interface, incl. USB cable
- Fan permanently active
- 36 months warranty incl. batteries*
The Eaton Ellipse PRO 650-1600VA is a line-interactive UPS, specially developed for the protection of workstations with demanding applications.
The Ellipse PRO is equipped with an LCD display for real-time status display and measured values.
It also has EcoControl sockets, which enable energy savings of up to 20 percent, as well as Advanced Surge Reduction (ASR) surge protection in accordance with the requirements of the IEC 616431-1 standard.
*Only valid in EU countries!
Energy-saving power supply protection for workstations
The LCD screen of the Eaton Ellipse PRO not only clearly displays the system status and measured values, it also makes it easier to configure the desired UPS settings.
The EcoControl function automatically deactivates the peripheral devices when the master device is switched off, thereby achieving energy savings of up to 20%.
The Automatic Voltage Regulation (AVR) function corrects voltage fluctuations immediately, so work can continue without battery operation if voltage drops or overvoltages occur.
The Ellipse PRO has high-performance overvoltage protection in accordance with IEC 61643-1.
It also protects data transmissions via Ethernet, Internet and telephone connections.
Simple integration and installation
The Ellipse PRO is optionally equipped with four (for 650/850 VA) or eight (for 1200/1600 VA) protective contact (DIN) or IEC sockets.
This makes it easy to connect standard computer configurations with peripheral devices.
Thanks to its extra-flat design, the Ellipse PRO can be easily installed in any office environment.
Possible applications include vertical installation (e.g. under the desk), horizontal installation (e.g. under the monitor), 19-inch rack mounting (optional 2U mounting kit) and wall mounting (optional mounting kit).
The Ellipse PRO is equipped with a USB port and comes complete with USB cable and the Eaton UPS Companion software, which ensures safe shutdown of the system, recording of energy consumption and easy configuration of UPS settings.
Comprehensive safety
- Three-year warranty, including on the batteries
- Unlimited warranty for the connected computer equipment (only in EU countries and Norway)
- The batteries are subjected to automatic self-tests at regular intervals, ensuring timely detection of batteries requiring replacement
- Easy-to-replace batteries help extend the life of the UPS

General Data:
- 800 VA / 500 W.
- 184 - 264 V.
- 6 min battery life at 70% load
- USB port
- Eaton Intelligent Power Software
- LED display and acoustic signal for battery replacement
- Replaceable, sealed batteries
- 3 outlets with surge protection and backup
- 1 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Ideal for protecting:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE mark
With their efficient electrical design and the EcoControl
Function (USB models), which peripherals automatically
Together with the master device, the will help you
Eaton Ellipse ECO, compared to previous-generation UPSs, up to
To save 25% energy.
In addition to a battery-backed power backup,
To keep your equipment in operation even in the event of a power failure,
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-performance surge protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines.
Through the HID-compatible interface is compatibility with all
Common operating systems also without additional drivers
guaranteed.
Further technical details can be found in the data sheet.

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 600Watts / 1.0kVA
- Max Configurable Power (Watts): 600Watts / 1.0kVA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...