RPI HB DAC+ RCA - HiFiBerry DAC+ RCA, Raspberry Pi shield
43.44 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
"HiFiBerry DAC+ standard RCA
The HiFiBerry DAC+ standard RCA is a high-resolution digital-to-analog converter for the Raspberry Pi. The analog audio signal is output via Cinch connectors (RCA), the entire circuit is optimized for the highest sound quality. It is compatible with all common Raspberry Pi and is simply plugged into the GPIO header of the Raspberry Pi.
details
- specialized, high-quality Burr-Brown DAC with maximum 192kHz/24bit, external Ultra-Low-Jitter-Clock for best sound quality.
- Hardware volume control, the volume can be adjusted using ""alsamixer"" or other ALSA mixer applications.
- is plugged directly onto the Raspberry Pi, no extra cables or soldering required
- meets the Raspberry Pi hardware-attached-on-top (HAT) specification.
- compatible with all popular Raspberry Pi models
- Power supply directly through the Raspberry Pi, no additional power supply required.
- Optimized, low-noise voltage regulator for optimum sound quality
- all parts required for assembly (4x M2.5 x 12 mm spacers).
Delivery without Raspberry Pi"
EAN: 4260439550057
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"HiFiBerry DAC+ standard RCA
The HiFiBerry DAC+ standard RCA is a high-resolution digital-to-analog converter for the Raspberry Pi. The analog audio signal is output via Cinch connectors (RCA), the entire circuit is optimized for the highest sound quality. It is compatible with all common Raspberry Pi and is simply plugged into the GPIO header of the Raspberry Pi.
details
- specialized, high-quality Burr-Brown DAC with maximum 192kHz/24bit, external Ultra-Low-Jitter-Clock for best sound quality.
- Hardware volume control, the volume can be adjusted using ""alsamixer"" or other ALSA mixer applications.
- is plugged directly onto the Raspberry Pi, no extra cables or soldering required
- meets the Raspberry Pi hardware-attached-on-top (HAT) specification.
- compatible with all popular Raspberry Pi models
- Power supply directly through the Raspberry Pi, no additional power supply required.
- Optimized, low-noise voltage regulator for optimum sound quality
- all parts required for assembly (4x M2.5 x 12 mm spacers).
Delivery without Raspberry Pi"
EAN: 4260439550057
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
JOY-IT RPI SHD DOUBLER - Raspberry Pi Shield - GPIO port expander
16.82 EUR
"This expansion board quadruples your GPIO module. Each pin can now be used four times. One defined pin can be used on all four GPIO ports. The highly compact design means the board takes up little additional space.- Incl. assembly materials
- Dimensions: 55 x 66 mm
The Raspberry Pi must be ordered separately."
SEEED RPI SHD GRV BASE - Raspberry Pi Shield - Grove Base HAT, 32F030F4P6
20.39 EUR
"The Grove Base HAT for Raspberry Pi offers a digital/analog/I2C/PWM/UART connector that meets all your needs. Using the built-in MCU, a 12-bit 8-channel ADC is also available for Raspberry Pi.features
- compatible with all popular Raspberry Pi models
- built-in MCU
- 12-bit ADC
- Multi-type Grove connection
specifications- Operating voltage: 3.3 V
- MCU: STM32
- ADC: 12-Bit 8-Channel
- 6x Digital Grove Port
- 4x Analog
- 3x I2C
- 1x PWM
- 1x UART
- Raspberry Pi communication bus: I2C
- I2C address: 0x04
Delivery without Raspberry Pi
For the users of Grove (especially beginners) there are instructions in pdf format. Before using the product you should read the chapters ""Preface"", ""Getting Started"" and ""Introduction to Grove""!
Further information on the product as well as data sheets, instructions and downloads can be found at http://wiki.seeedstudio.com/Grove_Base_Hat_for_Raspberry_Pi/"
RPI HB DIGI2 STD - HiFiBerry DIGI+ standard, Raspberry Pi shield
48.14 EUR
HiFiBerry Digi+ standardThe HiFiBerry Digi+ is a high-quality S/PDIF output with one optical and one electrical output for the Raspberry Pi and supports up to 192kHz/24bit. It uses the I2S port, which connects the audio data directly to the CPU without the detour via the USB port.
details
- S/PDIF chip with up to 192 kHz / 24 bit support
- optical Toslink and electrical coax output
- bit-precise transmission, audio data is not changed.
- is plugged directly onto the Raspberry Pi, no extra cables or soldering required
- meets the Raspberry Pi hardware-attached-on-top (HAT) specification.
- compatible with all popular Raspberry Pi models
- Voltage supply directly through the Raspberry Pi, no additional power supply unit
Delivery without Raspberry Pi
RASPBERRY PI RPI KEYBRD DE RW - Developer Boards - Keyboard, DE, red/white
25.04 EUR
This specially designed keyboard for the Raspberry Pi offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
- 79-key keyboard (78-key US keyboard)
- 3x USB 2.0 Type A ports for powering other peripherals
- automatic recognition of the keyboard language
- USB Type-A to MicroUSB Type-B cable for connection
- compatible with all Raspberry Pi products
- ergonomic design for comfortable use
- available in the colours red/white or black/grey
- available with the layouts DE, UK, US, FR, ES or IT
- CE and FCC compliant
RASPBERRY PI RPI MOUSE RD - Developer boards - Mouse, red/white
16.82 EUR
This mouse, specially designed for the Raspberry Pi, offers an ergonomic design in red/white.Specification
- optical three-button mouse
- scroll wheel
- USB Type A connector
- compatible with all Raspberry Pi products
- ergonomic design for comfortable use
- available in the colours red/white or black/grey
RASPBERRY PI RPI KEYBRD IT RW - Developer boards - keyboard, IT, red/white
27.93 EUR
This specially designed keyboard for the Raspberry Pi offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
- 79-key keyboard (78-key US keyboard)
- 3x USB 2.0 Type A ports for powering other peripherals
- automatic recognition of the keyboard language
- USB Type-A to MicroUSB Type-B cable for connection
- compatible with all Raspberry Pi products
- ergonomic design for comfortable use
- available in the colours red/white or black/grey
- available with the layouts DE, UK, US, FR, ES or IT
- CE and FCC compliant
RASPBERRY PI RPI KEYBRD DE BG - Developer boards - Keyboard, DE, black/grey
25.04 EUR
Made specifically for the Raspberry Pi, this keyboard offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
• 79-key keyboard (78-key US keyboard)
• 3x USB 2.0 Type-A ports for powering other peripherals
• automatic keyboard language detection
• USB Type-A to MicroUSB Type-B cable for connection
• compatible with all Raspberry Pi products
• compatible with Windows / MacOS / Linux
• ergonomic design for comfortable use
• available in the colors red/white or black/grey
• available with the layouts DE, UK, US, FR, ES or IT
• CE and FCC compliant
RASPBERRY PI RPI MOUSE BK - Developer boards - Mouse, black/grey
16.77 EUR
This mouse, specially designed for the Raspberry Pi, offers an ergonomic design in black/grey.Specification
- optical three-button mouse
- scroll wheel
- USB Type A connector
- compatible with all Raspberry Pi products
- ergonomic design for comfortable use
- available in the colours red/white or black/grey
FREI RPI MOUNTINGKIT4 - Raspberry Pi spacer kit, M2.5
23.8 EUR
"120-piece spacer assortment in plastic box.- Size: M2.5 metric
- Width across flats: 5 mm
- Material: brass, stainless steel
- Ideal for connecting extension boards to Raspberry Pi.
Contents:
- 10x M2.5 spacer 6 mm female - female
- 10x M2.5 spacer 10 mm female - female
- 10x M2.5 spacer 12 mm female - female
- 10x M2.5 spacer 15 mm female - female
- 10x M2.5 spacer 6 mm+6 mm male - female
- 10x M2.5 spacer 10 mm+6 mm male - female
- 10x M2.5 spacer 15 mm+6 mm male - female
- 10x M2.5 spacer 20 mm+6 mm male - female
- 20x M2.5 screw 8 mm
- 20x M2.5 nut
Note: Not suitable for Arduino products!"
RASPBERRY PI RPI KEYBRD ES RW - Developer boards - keyboard, ES, red/white
30.11 EUR
This specially designed keyboard for the Raspberry Pi offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
- 79-key keyboard (78-key US keyboard)
- 3x USB 2.0 Type A ports for powering other peripherals
- automatic recognition of the keyboard language
- USB Type-A to MicroUSB Type-B cable for connection
- compatible with all Raspberry Pi products
- ergonomic design for comfortable use
- available in the colours red/white or black/grey
- available with the layouts DE, UK, US, FR, ES or IT
- CE and FCC compliant
RASPBERRY PI RPI KEYBRD ES BG - Developer Boards - Keyboard, ES, black/grey
29.49 EUR
Made specifically for the Raspberry Pi, this keyboard offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
• 79-key keyboard (78-key US keyboard)
• 3x USB 2.0 Type-A ports for powering other peripherals
• automatic keyboard language detection
• USB Type-A to MicroUSB Type-B cable for connection
• compatible with all Raspberry Pi products
• compatible with Windows / MacOS / Linux
• ergonomic design for comfortable use
• available in the colors red/white or black/grey
• available with the layouts DE, UK, US, FR, ES or IT
• CE and FCC compliant
RASPBERRY PI RPI KEYBRD FR BG - Developer Boards - Keyboard, FR, black/grey
30.61 EUR
Made specifically for the Raspberry Pi, this keyboard offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
• 79-key keyboard (78-key US keyboard)
• 3x USB 2.0 Type-A ports for powering other peripherals
• automatic keyboard language detection
• USB Type-A to MicroUSB Type-B cable for connection
• compatible with all Raspberry Pi products
• compatible with Windows / MacOS / Linux
• ergonomic design for comfortable use
• available in the colors red/white or black/grey
• available with the layouts DE, UK, US, FR, ES or IT
• CE and FCC compliant
FREI RPI FAN DUAL - Raspberry Pi fan, dual
16.72 EUR
"This dual fan for the Raspberry Pi ensures proper cooling, especially with heavy loads like retro emulation, etc. Simple to install, thanks to the applied and ready-to-use heat conducting layer.- Operating voltage: 5 V (can also be operated at 3.3 V with reduced speed)
- Connector: 2-pin Dupont connector (RM 2.54 mm)
- Cable length: approx. 8 cm
- Dimensions: approx. 58 x 25 x 22 mm
Raspberry Pi not included
Important note: Please ensure that the edge of the heat sink touches only the chips to be cooled and no other surrounding components (risk of short circuit!)."
JOY-IT RPI CASE TR 19 - Housing for Raspberry Pi, tower, transparent
20.8 EUR
"You can store up to seven Raspberry Pi's in this maker case tower - perfect for your projects.- Material: acrylic and brass
- Color: transparent
- Compatible up to Raspberry Pi 4B
- Dimensions: 202 x 75 x 104 mm
Scope of delivery
Case tower in individual parts, screws"
RASPBERRY PI RPI KEYBRD IT BG - Developer Boards - Keyboard, IT, black/grey
29.38 EUR
Made specifically for the Raspberry Pi, this keyboard offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layouts.Specification
• 79-key keyboard (78-key US keyboard)
• 3x USB 2.0 Type-A ports for powering other peripherals
• automatic keyboard language detection
• USB Type-A to MicroUSB Type-B cable for connection
• compatible with all Raspberry Pi products
• compatible with Windows / MacOS / Linux
• ergonomic design for comfortable use
• available in the colors red/white or black/grey
• available with the layouts DE, UK, US, FR, ES or IT
• CE and FCC compliant
FREI RPI DINRAIL - Raspberry Pi rail bracket, grey
27.21 EUR
With this DIN rail holder, a Raspberry Pi can be easily mounted on a DIN rail. By means of cable ties, the connection cables can be securely fixed to the DIN rail holder.Specifications
• compatible with Raspberry Pi 5 B, 4 B, 3 B+, 3 B, 2 B, B+, A+, Asus Tinkerboard
• board is mounted on the holder using screws (included).
• integrated strain relief for USB power cable via cable tie
• vertical design requires little space on DIN rail
• easy access to all connectors and GPIO pins.
• the large 10 mm DIN clip grips reliably to the rail and cannot be loosened without using a screwdriver
• easy access to the Micro SD card
• dimensions: 78 x 67 x 6 mm
Delivery without developer board
FREI RPI SHD TPM - Raspberry Pi - Trusted Platform Module (TPM), SLB9672
35.78 EUR
A hardware Trusted Platform Module (TPM) can be used in a variety of ways, including for authentication / signatures, storing crypto keys and much more. The module can also be used as a True Hardware Random Number Generator (TRNG) if you need a good source of randomness!
Technical data
• compatible with all common Raspberry Pi models
• communication via SPI
• 2x 5 pins from pin 17 to pin 26 are occupied by LetsTrust
• Infineon Optiga™ SLB 9672 TPM 2.0
• compliant with TPM specification 2.0 Rev. 01.38
• TRNG (True Random Number Generator) - True Hardware Random Number Generator
• from Hardware Rev 2.0 (current version) with Raspberry Pi pins solderable
• fits into common standard cases with in
• Built-in support for Windows 10 IoT
• NEW: from Raspbian Stretch with kernel 4.14.85 build in support with a device tree overlay
Delivery without Raspberry Pi
RPI HB AMP2 - Raspberry Pi Shield - HiFiBerry AMP2
65.71 EUR
"HiFiBerry Amp2The new generation of HiFiBerry amplifier for high-quality stereo HD sound.
Up to 60 Watt output power with stereo use
The HiFiBerry AMP2 is an amplifier for the Raspberry Pi. With this amplifier you can connect your speakers directly.
We therefore recommend the AMP2 to all customers who want a high-end solution for multiroom audio installations.
- new design with black board and high-quality workmanship
- up to 60 Watt output power with stereo use
- Digital Analogue Converter included - no external DAC required
- improved power supply for connected Raspberry Pi and other devices
- compatible with Raspberry Pi
- 4 up to 8 Ohm speakers can be operated
- Spacer included in delivery for direct mounting on the Raspberry Pi
- HD audio with sampling rates up to 192 kHz
- Texas Instruments TAS5756m
- fully digital audio processing
- powerful voltage regulator that supplies both the AMP2 and the Raspberry Pi, supports 12-24 Volt
- only one power supply unit required - Attention: not included
FREI RPI COOL SI - Raspberry Pi cooling kit, 3-piece, silver
11.6 EUR
If the Raspberry Pi is overclocked or placed in an environment where the heat cannot be dissipated or can only be dissipated poorly, this cooling kit can reduce the risk of failure and extend the service life of the Raspberry Pi.Can also be used for the Banana Pi and other single-board computers.
• 3-piece
• easy installation thanks to double-sided adhesive tape
• extremely low profile
• compatible with all common Raspberry Pi models
Dimensions: 1x 14 mm (L) x 15 mm (W) x 5 mm (H) / 2x 8 mm (L) x 8 mm (W) x 5 mm (H)
Info: Please note that the heat sink may only touch the chip to be cooled and no other surrounding components (risk of short circuit!) If necessary, attach slightly offset, depending on the Raspberry Pi version!
WAVESHARE "RPI CASE WS 5LCD - Case for Raspberry Pi 3 & 5"" HDMI-display"
18.21 EUR
"This case was specially designed for the 5"" HDMI touch display from Waveshare and the Raspberry Pi.• no modifications necessary
• self-standing, no bracket necessary
• Material : Bicolor acrylic in the colors black and white
• is supplied with floor holder
• can be set up at an angle of 45° or 60
• mounting holes for Raspberry Pi B/A+/B+/2/3/4B
Note• only for the 5"" HDMI touch display (see accessories)
• suitable for Raspberry Pi (1)B+, 2B, 3B
• Delivery without Raspberry Pi and display"
WAVESHARE RPI GAME HAT - Raspberry Pi - Game HAT for Raspberry Pi
65.14 EUR
"With this Game HAT, a Raspberry Pi can be transformed into a mobile games console in just a few minutes.Features
• 3.5"" (8.89 cm) IPS display, 480 × 320 resolution
• 60 frames/s for smooth image playback
• compatible with Raspberry Pi 5B/4B/3B(+)/Zero/Zero W(H)/Zero 2 W(H)
• mobile operation possible with a 18650 LiIon cell (see accessories). The battery can also be charged via the integrated charging circuit.
• display for battery charge status
• Sound playback possible via on-board speaker or 3.5 mm jack socket
Scope of delivery
• Game HAT
• acrylic housing
• HDMI adapter
• mounting screws
Documentation / Downloads
https://www.waveshare.com/wiki/Game_HAT
https://www.waveshare.com/w/upload/2/22/Game_HAT_user_manual_en.pdf
Note
the supplied HDMI adapter is only suitable for Raspberry pi 3B(+). For the other RPI models, please use an adapter from HDMI to microHDMI (not included)"
SEEED RPIZ GRV BASE - Raspberry Pi Zero Shield - Grove Base HAT
17.75 EUR
"The Grove Base HAT for Raspberry Pi offers a digital/analog/I2C/PWM/UART connector to meet all your needs. With the help of the built-in MCU, a 12-bit 6-channel ADC is also available for Raspberry Pi.Features
• supports Raspberry Pi boards
• built-in MCU
• 12-bit ADC
• multi-type grove connector
Specifications
• operating voltage: 3.3 V
• MCU: STM32
• ADC: 12-bit 6-channel
• 2x Digital Grove Port
• 3x Analog
• 1x I2C
• 1x PWM
• 1x UART
• Raspberry Pi communication bus: I2C
• I2C address: 0x04
Delivery without Raspberry Pi
For Grove users (especially beginners), there are instructions in pdf format. Before using the product, you should definitely read the chapters ""Preface"", ""Getting Started"" and ""Introduction to Grove""!
More information about the product as well as data sheets, manuals, downloads can be found at http://wiki.seeedstudio.com/Grove_Base_Hat_for_Raspberry_Pi_Zero/."
JOY-IT RPI RS232 - Raspberry Pi Shield - RS232 interface, MAX3232CWE
22.87 EUR
With this adapter you can add an RS232 interface to your Raspberry Pi.The POIs are looped through and can therefore continue to be used.
Dimensions (W x D x H): 3.5 x 5.5 x 2.5 cm
Raspberry Pi not included in delivery
JOY-IT "RASP PI 5TD - Raspberry Pi shield — 5"" LCD touchscreen display, 800 x 480 pixe"
60.18 EUR
"The 5"" touchscreen display from Joy-IT impresses with a high-contrast, sharp image and offers a maximum resolution of 800 x 480 pixels.A special HDMI adapter is included in the scope of delivery. By means of the adapter, the display can be plugged directly onto Raspberry and fixed to a unit.
Technical specifications
• 12,7 cm (5"") touch display
• dimensions (LxWxH): 120 x 79 x 7 mm
• resolution: 800 x 480 pixel
• Connection to Raspberry Pi via HDMI adapter
• 5 V voltage via microUSB interface
• supports Raspberry Pi: Raspbian and Ubuntu
• compatible with all current Raspberry Pi models
Scope of delivery
• 5"" HDMI LCD
• HDMI-HDMI adapter
• stylus
Note: Now also compatible with the Raspberry Pi 4 B!
Useful Links
Calibration tool
https://www.joy-it.net/files/files/Produkte/RB-LCD-5/xinput-calibrator.zip
OS Raspbian Buster
https://joyiteurope-my.sharepoint.com/:u:/g/personal/onedrive_joyiteurope_onmicrosoft_com/ETkyZdWCNqxNk4DJbPIUuw0BEmMCwNVMauUPBOvqHY6yXQ?e=R34IAT
OS Raspbian Jessie
https://joyiteurope-my.sharepoint.com/:u:/g/personal/onedrive_joyiteurope_onmicrosoft_com/EbgEqd9ojtlOrHkpD-830jYBzXeCNnKdiu-uNKl_5KvgPw?e=Z4HwYM
Touchscreen driver
https://joyiteurope-my.sharepoint.com/:u:/g/personal/onedrive_joyiteurope_onmicrosoft_com/EZMOJMeqwSRAsdBbJbbh9mwBJ4f-eDHcGMq7efQKhcfjmw?e=6F8c3z"
JOY-IT RPI RS485 - Raspberry Pi RS485 interface
22.66 EUR
With this adapter you can add an RS485 interface to your Raspberry Pi.The POIs are looped through and can therefore continue to be used.
Dimensions (W x D x H): 3.5 x 5.5 x 2.5 cm
Raspberry Pi not included in delivery
JOY-IT RASP SHD PROTO - Prototype shield for the Raspberry Pi B+, 2 & 3
22.66 EUR
With this prototype board you can realize your own designs and projects in no time for your Raspberry.The 55 x 85 mm board has a 40-pin GPIO strip, which allows you to connect the board and Raspberry perfectly and easily. The screw terminals are already pre-installed.
The included spacers and screws are designed so that the board can also be screwed directly onto the Raspberry B+, 2, 3 or 4.
Dimensions: 55 x 85 mm
Scope of delivery: prototype board, screws, spacers
WAVESHARE "RASP PI 5TD WAV - Raspberry Pi Shield - LCD-Touch-Display, 5"", 800x480 Pixel"
55.38 EUR
"A 5"" (12.7 cm) display with resistive touch screen designed for your Raspberry Pi.• compatible with all Raspberry Pi models
• is simply plugged into the GPIO port
• Power supply and touch screen via GPIO
• Image transmission via included HDMI U-adapter
• 800×480 resolution
• backlight can be switched off by a switch on the back of the display
• easy mounting
Technical data:• LCD Type: TFT
• LCD interface: HDMI
• Touchscreen Type: Resistive
• touchscreen interface: GPIO I/O
• Backlight: LED
• Resolution: 800 x 480 pixels
• Power consumption: 400 mA
Scope of delivery:
• Display
• HDMI/HDMI adapter
• Touch pen
• screw set
Documentation and downloads can be found here:
Download
Note: HDMI adapter cannot be used for Raspberry Pi 4, see accessories!"
CAMDENBOSS RPI CASE DINRAIL - Housing for Raspberry Pi 3, top hat rail, grey/trans.
22.15 EUR
The first professional DIN rail housing for the Raspberry Pi B+, 2 or 3- Housing with clear front and cut-outs for connections
- no modifications necessary
- Raspberry Pi housing for the top hat rail
reference
- suitable for Raspberry Pi (1)B+, 2B, 3B, 3B+
- Delivery without Raspberry Pi
MIKROELEKTRONIKA RASP RASPYPLAY4 - Raspberry Pi Shield - RaspPlay4, PCM5122
48.71 EUR
The RaspyPlay4 from MikroElektronika is an additional board for the Raspberry Pi. Because the Pi is a popular choice for multimedia projects, the RaspyPlay4 is the perfect tool to help your Pi create high-quality sound.Features and Benefits of RaspyPlay4- PCM5122-DAC for great audio performance
- integrated software RuneAudio
- supports FLAC, ALAC, MP3 and WMA sound formats
- Web interface that allows playback control with a variety of devices
- Ability to store music on USB flash, USB hard drive, SD card or a network storage server (NAS) or stream music via AirPlay
- Extremely low noise regulator
- 2 standard RCA stereo audio jacks
- Line out IR receiver TSOP34836 for remote control
- hardware volume control
- LCD connector
Scope of delivery
RaspyPlay4 board, 1x4-pole male connector, 2x5-pin male connector
FREI RPI MSD FL50 - Raspberry Pi microSD extension, flexible, 50 cm
14.45 EUR
"This extension cable allows a microSD interface to be extended, with easy routing thanks to the flexible cable. Ideal for use with the Raspberry Pi in situations where, for example, the Raspberry Pi has been installed but the memory card needs to remain accessible. Technical data
- Connections: microSD plug > microSD socket/slot (with push/eject function)
- For microSD cards
- FPC cable
- Contacts: gold-plated
- Colour: black
- Cable length: approx. 50 cm
RPI PS 15W BK US - Raspberry Pi - Power supply, 5.1 V, 3.0 A, USB Type-C, US plug,
19.1 EUR
"Raspberry Pi 4 and 5 USB-C power supply - US plugOfficial plug-in switching power supply with USB Type-C output for the Raspberry Pi and to power a variety of other devices.
- applicable for Raspberry systems among others
- Input: 90 - 264 V AC, 50 - 60 Hz
- output: 5.1 V DC, max. 3.0 A
- Power: 15 W
- 1.5 m cable
- USB Type-C
- short circuit, overload and overvoltage protection
- low standby power consumption
- double insulated according to class II
- color: black
Note
Please use this power supply with the Pi 5 only if you do not connect any power-hungry accessories to the Pi. Otherwise, please use the Raspbbery Pi 5 power supply with 27W output power."
UNIPI TECHNOLOGY RPI UNIPI 1.1 - Raspberry Pi - UniPi 1.1 Control module
170.11 EUR
"The new UNIPI module is compatible with all popular Raspberry Pi models. It is a high-quality control module that allows you to perform a wide range of control tasks. Since both analog and digital inputs and outputs are available, a wide range of switches, sensors and motors can be controlled, which makes the UNIPI very interesting for smart home applications, for example. Technical features
• compatible with all current Raspberry Pi variants
• 8x Finder (36.11.9.005.4011) changeover contact relay - controlled via the I²C bus by MCP23008 (230 V AC / 5 A and 24 V DC / 5 A) for controlling e.g. light switches, motors, door locks
• 12x + 2x galvanic isolated digital inputs - input range 5 ... 24 V DC (minimum pulse length of 5 ms) for evaluation of sensors or switches to control program sequences
• 2x analog inputs - input range 0 ... 10 V (ADC: MCP3422). Evaluation of variable voltages, like rotary switch/dimmer or e.g. analog sensors like microphones or light sensors.
• 1x analog output - output range 0 ... 10 V / 20 mA. Easy control by PWM signal controlled output of own voltages
• 1x One-Wire sensor bus connection - RJ45 output with 5 V / 0.2 A. Supply industrial standard One-Wire sensors can be used, e.g. a temperature sensor
• 2x I2C bus output - 1x RJ45 and 1x pin header communication interface to other components
• 1x Uart output - RJ45 allows access to the system e.g. for configuration
• RTC - Real Time Clock module - time dependent applications can be secured by synchronization with the current time
• usable with known ""Webiopi"" software or own ""Evok"" API
• dimensions (LxWxH): 198 x 86 x 20 mm
Scope of delivery
• UniPi 1.1 board
• quick start guide
• 26-pin cable for the connection between the UniPi board and a Raspberrry Pi
• mounting screws
Delivery without Raspberry Pi
external links
https://www.unipi.technology/unipi-1-1-p36"
JOY-IT "RASP PI 3.5TD - Raspberry Pi Shield - Display LCD-Touch, 3,5"", 480x320 Pixel, XP"
30.52 EUR
With the 3.5 inch (8.89 cm) TFT touchscreen display, you can build a mini tablet PC based on a Raspberry Pi in no time at all. The display, which has a maximum resolution of 480 x 320 pixels, is simply plugged onto the existing GPIO connections and therefore requires no assembly skills.Technical data
• resolution: 480 x 320
• Touchscreen controller: resistive
• Touchscreen controller: XPT2046
• Colors: 65,536
• Display size: 85 x 56 mm
• Aspect ratio: 8:5
• Backlight: LED
• Connection: GPIO Header
Compatible with all common Raspberry Pi models
Delivery without Raspberry Pi and housing
Current instructions and downloads can be found at
https://joy-it.net/de/products/RB-TFT3.5
JOY-IT RPI CASE ALU 3B+ - Housing for Raspberry Pi 3, aluminium, black
19.72 EUR
"The Armor case ""BLOCK"" for the Raspberry Pi 3B and 3B+ is your ideal partner when the going gets tough and really hot.The aluminum-based case protects the top and bottom of the Pi against heat and shock almost perfectly. This makes it ideal for difficult environments. It is designed so that it does not take up more space than the pi alone would take up, thus allowing it to be used in existing projects.
- massive protection of the circuit board against heat and shocks
- CNC milled aluminium
- the required space volume of the Pi remains the same"
FREI RPI CASE ALU07 - Housing for Raspberry Pi 4, aluminium, black
17.7 EUR
"This robust, high-quality Armor Case ""BLOCK"" for your Raspberry Pi 4 B is your ideal partner when it gets hot, because it protects your Raspberry Pi 4 B against heat and shocks. Therefore it is perfectly suitable for extreme conditions.The housing does not require any additional space and can therefore be integrated into existing projects.
- Material: CNC milled aluminium alloy
- Colour: black
- compatible with the Raspberry Pi 4 B
- 4 included screws connect housing and Pi
- large heat sink protection against shocks and heat
- Dimensions top side: 69 x 56 x 15,5 mm
- Dimensions underside: 87 x 56 x 7,5 mm
Scope of delivery
Armor Case ""BLOCK"", Screws, Thermal Transfer Foil
reference
- metallic housings can impair onboard WLAN or Bluetooth signals!
FREI RPI USB METER1 - Raspberry Pi amp/voltmeter, 1-way, USB
13.62 EUR
"Simply plug this little helper into an existing USB connection and use it to measure and analyse the power consumption of devices being charged or operated via USB in real time. The large, red illuminated display alternately shows power consumption and voltage. Ideal, for example, for evaluating a power supply unit for the Raspberry Pi.
Technical specifications:
- Voltage: 3.5 - 7 V
- Current: 0 - 3 A
- Input: USB-A plug
- Output: USB-A socket
FREI RPI USB METER2 - Raspberry Pi - amp/voltmeter, 2-way, USB
20.7 EUR
"Simply plug this little helper into an existing USB connection and use it to measure and analyse the power consumption of devices being charged or operated via USB in real time. The red/blue split display shows power consumption and voltage. A USB device can be connected to each of the two USB sockets at the same time. The combined power consumption of both devices is shown. Technical specifications:
- Voltage: 3.5 - 7 V
- Current: 0 - 3 A
- Input: 1x USB-A plug with cable connection
- Output: 2x USB-A sockets
- Socket 1: data transfer and power supply
- Socket 2: power supply only
Note: Please be aware that both data transfer and power supply are only available on output 1. The second output only provides a power supply!"
ONE NINE DESIGN "RPI OND 7TD BK - Case for Raspberry Pi 3 & 7"" Touch-Display"
29.54 EUR
"Raspberry Pi LCD touchscreen enclosureThe touch screen case is designed to accommodate your Raspberry Pi board and the Raspberry Pi-7"" LCD touch screen, see Accessories.
Available in black, white or transparent, the housings offer protection for the circuit board and the display. The housing also serves as a mounting frame for the display. This improves the appearance and ensures a clean placement of the circuit board.
Features and Benefits- makes the touch screen and the pi board portable
- Recesses for all connections
- Connector slot for camera board
- Equipment for wall mounting
- four screw fasteners for mounting on the touch screen are included in delivery
- Rear cover with light clip fastening for protection/access to all internal connectors
dimensions
197 x 116 x 47 mm
Use for- Raspberry Pi (1)B+, 2B, 3B, 3B+
- Original 7"" Raspberry Pi LCD Touch Screen
By default, the screen output is rotated by 180°. Under the config file ""sudo nano /boot/config.txt"" the command ""display_rotate=2"" corrects this behavior"
HB CASE DAC+ SBL - Steel case for HiFiBerry DAC+, black cover
33.57 EUR
This is our most robust case, made completely from steel. It is ideal for environments that need something rugged or for people that don't like plastic. Note that it only works with the RCA version of HiFiBerry DAC+, not the Digi+ or the Amp+.Delievery without Raspberry Pi