ROTH-ELEKTRONIK RE 936-08 - Multiadapter TSSOP24 / SSOP24 0.65 mm pitch
12.28 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
"Adapter for TSSOP24 and SSOP24
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: limited amount 4-5 business days
Condition: new
"Adapter for TSSOP24 and SSOP24
- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for TSSOP24 and SSOP24
- Pitch: 0.65 mm
- Single-row hole spacing: 2.54 mm
- Two experimental fields with square single-hold conductors (2 x 3) 2.20 x 2.20 mm
- Size: 31.75 x 19.05 mm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: limited amount 4-5 business days
Condition: new
Comparison of Similar Products
ROTH-ELEKTRONIK RE 931-05 - SSOP adapter, 28 pins, 0.65 mm pitch
15.74 EUR
FR4 epoxy fibreglass laminate, 1.5 mm• Double-sided 35 µm Cu (plated through)
• Solder and component sides with a surface made of chem. gold and a solder resist mask
• Pitch: 0.65 (208 mil)
• Pins: 28
• Hole diameter 1.00 mm
• Size: 13.0 x 23.5 mm
ROTH-ELEKTRONIK RE 936-07 - Adap. SOP28/SOIC28/SOIC28w/HSOP28/SO28 P=1.27 mm
12.53 EUR
"Adapter for SOP28, SOIC28, SOIC28w, HSOP28 and SO28- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for SOP28, SOIC28, SOIC28w, HSOP28 and SO28
- Pitch: 1.27 mm
- Single-row hole spacing: 2.54 mm
- Two experimental fields with square single-hold conductors (2 x 4) 2.20 x 2.20 mm
- Size: 36.83 x 26.67 mm
ROTH-ELEKTRONIK RE 931-01 - Adapter SSOP 14 pins 0.65-mm pitch
17.17 EUR
"Adapter for SSOP14- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for SSOP14
- Pitch: 0.65 mm
- Hole diameter 1.00 mm
- Size: 13.02 x 23.50 mm
MILESIGHT MIL VS135-L08EBL - People counting sensor, 0.5 - 3.5 m, 4G, IP65, black
1110.7 EUR
"VS135-L08EU PN: Black AI ToF people counting sensor IP65 4G- ToF FoV (field of view): 98° horizontal, 80° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 3.5 cm
- Detection range: 0.5 - 3.5 m
- Detection rate: up to 99.8%
- Mounting height: 3.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
Boasting an impressive accuracy of up to 99.8% people counting, this sensor fully meets your requirements.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Data retransmission: support for 8 x 50,000 data retransmission packets
- Power supply: DC 12V/2A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): standard 4.33 W
- Memory: up to 1 million records, supports export as CSV
MILESIGHT MIL VS135-L08EW - People counting sensor, 0.5 - 3.5 m, 4G, IP65, white
1110.7 EUR
"VS135-L08EU AI ToF people counting sensor IP65 4G- ToF FoV (field of view): 98° horizontal, 80° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 3.5 cm
- Detection range: 0.5 - 3.5 m
- Detection rate: up to 99.8%
- Mounting height: 3.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
Boasting an impressive accuracy of up to 99.8% people counting, this sensor fully meets your requirements.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Data retransmission: support for 8 x 50,000 data retransmission packets
- Power supply: DC 12V/2A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): standard 4.33 W
- Memory: up to 1 million records, supports export as CSV
ROTH-ELEKTRONIK RE 200-C3 - Prototyping board, CEM3, spacing 2.54 mm, 38 x 61 soldering pads
15.79 EUR
CEM3 1.5 mm, single-sided 35 µm Cu• Hot air levelled (HAL — lead free)
• 38 x 61 soldering pads, Ø 2.2 mm
• Hole pattern 2.54 x 2.54 mm
• Hole diameter 1.0 mm
• Size: 100 x 160 mm
ROTH-ELEKTRONIK RE 936-06 - Multi-adapter SSOP28 and TSSOP28 0.65 mm pitch
12.53 EUR
"Adapter for SSOP28 and TSSOP28- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for SSOP28 and TSSOP28
- Pitch: 0.65 mm
- Single-row hole spacing: 2.54 mm
- Holes: Ø 1.10 mm with single-hole conductors Ø 2.20 mm
- Two experimental fields with square single-hold conductors (3 x 6) 2.20 x 2.20 mm
- Size: 36.83 x 29.21 mm
ROTH-ELEKTRONIK RE 100LF - Prototyping board, FR4, spacing 2.50 mm, 37 x 62 soldering pads
17.5 EUR
FR4 epoxy, 1.5 mm• Single-sided 35 µm Cu
• Hot air levelled (HAL — lead free)
• 37 x 56 soldering pads, Ø 2.1 mm
• Hole pattern 2.50 x 2.50 mm
• Hole diameter 1.0 mm
• Size: 100 x 160 mm
ROTH-ELEKTRONIK RE 913 - Adapter DFN10/eMSOP10 0.50-mm pitch RM 2.54 mm
12.28 EUR
"Adapter for DFN10 and eMSOP10- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for DFN10 and eMSOP10 with 0.50-mm pitch
- Hole spacing: 2.54 mm
- Single-hole conductor: Ø 2.20 mm
- Shield pad
- Size: 12.50 x 12.50 mm
ROTH-ELEKTRONIK RE 935-08R - Multi-adapter QFN16 P=0.65 mm RM 2.54 mm
12.28 EUR
"Adapter for QFN16- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFN16
- Pitch: 0.65 mm
- Single-row hole spacing: 2.54 mm
- Suitable for sockets with a pitch of 7.62 mm
- Size: 13.97 x 21.59 mm
ROTH-ELEKTRONIK RE 935-08E - Multi-adapter QFN16 P=0.65 mm RM 2.54 mm
12.28 EUR
"Adapter for QFN16- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFN16
- Pitch: 0.65 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 20.32 x 21.59 mm
ROTH-ELEKTRONIK RE 220LF - Prototyping board, FR4, spacing 2.54 mm, 31-pin
17.5 EUR
FR4 epoxy, 1.5 mm• Single-sided 35 µm Cu
• Hot air levelled (HAL — lead free)
• 37 x 58 soldering pads, Ø 2.2 mm
• Hole pattern 2.54 x 2.54 mm
• Hole diameter 1.0 mm
• Size: 100 x 160 mm
• Connector: 31-pin, DIN 41617
ROTH-ELEKTRONIK RE 220HP - Prototyping board, FR2, spacing 2.54 mm, 31-pin
14.6 EUR
Phenolic resin laminated paper, FR2, 1.5 mm• Single-sided 35 µm Cu
• Organic surface protection (OSP)
• 37 x 58 soldering pads, Ø 2.2 mm
• Hole pattern 2.54 x 2.54 mm
• Hole diameter 1.0 mm
• Size: 100 x 160 mm
• Connector: 31-pin, DIN 41617
ROTH-ELEKTRONIK RE 934-06E - Multi-adapter TQFP32 up to 64 P=0.80 mm RM 2.54 mm
15.11 EUR
"Adapter for TQFP32 up to 64- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for TQFP32 up to 64
- Pitch: 0.8 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 46.99 x 46.99 mm
ROTH-ELEKTRONIK RE 934-05E - Multi-adapter TQFP32 up to 100 P=0.50 mm RM 2.54 mm
15.63 EUR
"Adapter for TQFP32 up to 100- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for TQFP32 up to 100
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 69.85 x 69.85 mm
ROTH-ELEKTRONIK RE 317HP - Prototyping board, FR2, spacing 2.54 mm, 32-pin
14.6 EUR
Phenolic resin laminated paper, FR2, 1.5 mm• Single-sided 35 µm Cu
• Organic surface protection (OSP)
• Soldering islands 37 x 55, 2.0 mm²
• Hole pattern 2.54 x 2.54 mm
• Hole diameter 1.0 mm
• Size: 100 x 160 mm
• Connector: 32-pin, DIN 41612, pattern 5.08 mm, design D
ROTH-ELEKTRONIK RE 317LF - Prototyping board, FR4, spacing 2.54 mm, 32-pin
17.5 EUR
FR4 epoxy, 1.5 mm• Single-sided 35 µm Cu
• Hot air levelled (HAL — lead free)
• Soldering islands 37 x 55, 2.0 mm²
• Hole pattern 2.54 x 2.54 mm
• Hole diameter 1.0 mm
• Size: 100 x 160 mm
• Connector: 32-pin, DIN 41612, pattern 5.08 mm, design D
ROTH-ELEKTRONIK RE 323LF - Prototyping board, FR4, spacing 2.54 mm, 32/48-pin
17.5 EUR
FR4 epoxy, 1.5 mm• Single-sided 35 µm Cu
• Hot air levelled (HAL — lead free)
• Soldering islands 32 x 55, 2.2 mm²
• Hole pattern 2.54 x 2.54 mm
• Hole diameter 1.0 mm
• Connector: 32-pin/D DIN 41612
• Connector: 48-pin/E DIN 41612
• Connector: 48-pin/F DIN 41612
• Size: 100 x 160 mm
ROTH-ELEKTRONIK RE 902 - SOT 23-10 adapter, 0.50-mm pitch RM 2.54 mm
12.28 EUR
"Adapter for SOT23-10- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for SOT23-10 with 0.50 mm pitch
- Hole spacing: 2.54 mm
- Single-hole conductor: Ø 2.00 mm
- Suitable for sockets with a pitch of 7.62 mm
- Shield pad
- Size: 12.50 x 12.50 mm
ROTH-ELEKTRONIK RE 319LF - Prototyping board, FR4, spacing 2.54 mm, 64-pin
17.5 EUR
FR4 epoxy, 1.5 mm• Single-sided 35 µm Cu
• Hot air levelled (HAL — lead free)
• 37 x 55 soldering pads, Ø 2.2 mm
• Hole pattern 2.54 x 2.54 mm
• Hole diameter 1.0 mm
• Connector: 64-pin, DIN 41612, pattern 2.54 mm, design C
• Size: 100 x 160 mm
ROTH-ELEKTRONIK RE 318HP - Prototyping board, FR2, spacing 2.54 mm, 64-pin
14.6 EUR
Phenolic resin laminated paper, FR2, 1.5 mm• Single-sided 35 µm Cu
• Organic surface protection (OSP)
• 33 x 55 soldering pads, Ø 2.2 mm
• Hole pattern 2.54 x 2.54 mm
• Hole diameter 1.0 mm
• Connector: 64-pin, DIN 41612, pattern 2.54 mm, design C
• Size: 100 x 160 mm
ROTH-ELEKTRONIK RE 935-01E - Multi-adapter QFP44 and TQFP44 P=0.80 mm RM 2.54 mm
12.53 EUR
"Adapter for TQFP44 and QFP44- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for TQFP44 and QFP44
- Pitch: 0.8 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 36.20 x 34.29 mm
ROTH-ELEKTRONIK RE 934-03E - Multi-adapter QFP32 and QFN32 P=0.65 mm RM 2.54 mm
12.28 EUR
"Adapter for QFP32 and QFN32- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP32 and QFN32
- Pitch: 0.65 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 26.67 x 28.57 mm
ROTH-ELEKTRONIK RE 934-03R - Multi-adapter QFP32 and QFN32 P=0.65 mm RM 2.54 mm
12.28 EUR
"Adapter for QFP32 and QFN32- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP32 and QFN32
- Pitch: 0.65 mm
- Single-row hole spacing: 2.54 mm
- Suitable for sockets with a pitch of 15.24 mm
- Size: 19.05 x 42.55 mm
ROTH-ELEKTRONIK RE 934-04R - Multi-adapter QFP32 and QFN32 P=0.80 mm RM 2.54 mm
12.28 EUR
"Adapter for QFP32 and QFN32- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP32 and QFN32
- Pitch: 0.8 mm
- Single-row hole spacing: 2.54 mm
- Suitable for sockets with a pitch of 15.24 mm
- Size: 19.05 x 42.55 mm
ROTH-ELEKTRONIK RE 969-01 - Adapter TSOP56 P=0.635 mm RM 2.54 mm
12.53 EUR
"Adapter for TSSOP56- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for TSOP56
- Pitch: 0.635 mm
- Double-row hole spacing: 2.54 mm
- Size: 39.37 x 41.91 mm
ROTH-ELEKTRONIK RE 938-01 - Adapter HSSOP8 P=0.80 mm RM 2.54 mm
12.28 EUR
"Adapter for HSSOP8- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for HSSOP8
- Single-row hole spacing: 2.54 mm
- Hole diameter: 1.10 mm with single-hole conductors Ø 2.10 mm
- Size: 15.88 x 13.97 mm
ROTH-ELEKTRONIK RE 938-03 - Adapter HSSOP16 P=0.80 mm RM 2.54 mm
12.28 EUR
"Adapter for HSSOP16- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for HSSOP16
- Single-row hole spacing: 2.54 mm
- Hole diameter: 1.10 mm with single-hole conductors Ø 2.10 mm
- Size: 15.88 x 22.57 mm
ROTH-ELEKTRONIK RE 938-05 - Adapter HSSOP24 P=0.80 mm RM 2.54 mm
12.28 EUR
"Adapter for HSSOP24- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for HSSOP24
- Single-row hole spacing: 2.54 mm
- Hole diameter: 1.10 mm with single-hole conductors Ø 2.10 mm
- Size: 20.95 x 32.38 mm
ROTH-ELEKTRONIK RE 966-03E - Adapter QFP80 P=0.80 mm RM 2.54 mm
13.57 EUR
"Adapter for QFP80- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP80
- Pitch: 0.8 mm
- Double-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 43.80 x 48.90 mm
ROTH-ELEKTRONIK RE 966-01E - Adapter QFN64 P=0.80 mm RM 2.54 mm
13.57 EUR
"Adapter for QFP64- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP64
- Pitch: 0.8 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 46.99 x 46.99 mm
ROTH-ELEKTRONIK RE 934-01E - Multi-adapter QFP44 and QFN44 P=0.50 mm RM 2.54 mm
12.28 EUR
"Adapter for QFP44 and QFN44- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP44 and QFN44
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 34.30 x 34.30 mm
ROTH-ELEKTRONIK RE 934-09E - Multi-adapter QFP56 and QFN56 P=0.50 mm RM 2.54 mm
13.88 EUR
"Adapter for QFP56 and QFN56- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP56 and QFN56
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 41.91 x 41.91 mm
ROTH-ELEKTRONIK RE 935-06E - Multi-adapter QFN16 P=0.50 mm RM 2.54 mm
12.28 EUR
"Adapter for QFN16- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFN16
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 20.32 x 21.59 mm
ROTH-ELEKTRONIK RE 935-05E - Multi-adapter QFN20 P=0.50 mm RM 2.54 mm
12.28 EUR
"Adapter for QFN20- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFN20
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 20.32 x 21.59 mm
ROTH-ELEKTRONIK RE 935-07R - Multi-adapter LGA16 P=0.50 mm RM 2.54 mm
12.28 EUR
"Adapter for LGA16- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for LGA16
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- Suitable for sockets with a pitch of 7.62 mm
- Size: 13.97 x 21.59 mm
ROTH-ELEKTRONIK RE 935-06R - Multi-adapter QFN16 P=0.50 mm RM 2.54 mm
12.28 EUR
"Adapter for QFN16- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFN16
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- Suitable for sockets with a pitch of 7.62 mm
- Size: 13.97 x 21.59 mm
ROTH-ELEKTRONIK RE 935-03R - Multi-adapter QFN40 P=0.50 mm RM 2.54 mm
12.53 EUR
"Adapter for QFP40 and QFN40- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP40 and QFN40
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- Suitable for sockets with a pitch of 15.24 mm
- Size: 19.05 x 52.70 mm
ROTH-ELEKTRONIK RE 935-03E - Multi-adapter QFN40 P=0.50 mm RM 2.54 mm
12.53 EUR
"Adapter for QFP40 and QFN40- Epoxy fibre-glass FR4 1.50 mm
- Double-sided 35 µm Cu
- Plated through holes (PTH)
- Surface chemical: Ni/Au
- Solder resist
- Adapter circuit board for QFP40 and QFN40
- Pitch: 0.5 mm
- Single-row hole spacing: 2.54 mm
- External connection options on the reverse with 0603 SMD pads for each pin
- Resistors or similar components can be mounted directly
- Size: 31.75 x 33.66 mm