ROLLEI 20681 - Photo and slide scanner, 5.1 MP, 61 mm
122.61 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
"In the age of the Internet and digital photography, slides, negatives and even photos eke out a miserable existence in magazines, folders, shoeboxes and cigar boxes. It's a shame they don't find their way onto websites and social media platforms. And the purest disaster when the collected memories gradually fade and fall victim to the ravages of time.
Digitised, restored, preservedWith the PDF-S 240 SE multi-scanner from Rollei, you can digitise your photos and make them accessible for optimisation through modern image processing. Try out the possibilities the included software opens up for you if you have scanned photos from grandfather's or great-grandfather's time. You can make cracks, scratches and stains disappear, and optimise brightness and contrast to reveal details you might not have spotted on the original. The high resolution of the PDF-S 240 SE of 1800 dpi, interpolated even up to 2400 dpi, also allows you to expose the scan data in much larger formats than the often very small historical originals - scan your ancestral gallery, large enough for today's picture frames, or share the pictures with relatives and friends on the web.
Multiscanner for photos and films
With the Rollei PDF-S 240 SE, you get a multifunctional scanner that can be switched between reflected light mode - for photos up to image size 13 x 18 cm - and transmitted light mode - for negatives as well as mounted slides and slide film strips - with a simple flip of the switch. This means you are well equipped to digitise your entire analogue archive. Exposure is automatic, but can be adjusted individually if required. Pure white LEDs ensure true colour reproduction, both in incident and transmitted light mode. It is not absolutely necessary to connect the Rollei PDF-S 240 SE to a computer for your scans. Simply check the results on the integrated 2.4-inch TFT colour display and save the scan data on your SD, SDHC or MMC card, for which the device offers a slot."
EAN: 4048805206810
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"In the age of the Internet and digital photography, slides, negatives and even photos eke out a miserable existence in magazines, folders, shoeboxes and cigar boxes. It's a shame they don't find their way onto websites and social media platforms. And the purest disaster when the collected memories gradually fade and fall victim to the ravages of time.
- 5.1 megapixel
- 6.1 cm (2.4"") TFT colour monitor
- automatic exposure
- Scan without computer
- USB 2.0
Digitised, restored, preservedWith the PDF-S 240 SE multi-scanner from Rollei, you can digitise your photos and make them accessible for optimisation through modern image processing. Try out the possibilities the included software opens up for you if you have scanned photos from grandfather's or great-grandfather's time. You can make cracks, scratches and stains disappear, and optimise brightness and contrast to reveal details you might not have spotted on the original. The high resolution of the PDF-S 240 SE of 1800 dpi, interpolated even up to 2400 dpi, also allows you to expose the scan data in much larger formats than the often very small historical originals - scan your ancestral gallery, large enough for today's picture frames, or share the pictures with relatives and friends on the web.
Multiscanner for photos and films
With the Rollei PDF-S 240 SE, you get a multifunctional scanner that can be switched between reflected light mode - for photos up to image size 13 x 18 cm - and transmitted light mode - for negatives as well as mounted slides and slide film strips - with a simple flip of the switch. This means you are well equipped to digitise your entire analogue archive. Exposure is automatic, but can be adjusted individually if required. Pure white LEDs ensure true colour reproduction, both in incident and transmitted light mode. It is not absolutely necessary to connect the Rollei PDF-S 240 SE to a computer for your scans. Simply check the results on the integrated 2.4-inch TFT colour display and save the scan data on your SD, SDHC or MMC card, for which the device offers a slot."
EAN: 4048805206810
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
THERMAL GRIZZLY TG-MP8-100-15-1 - Minus Pad 8 – 100 x 100 x 1.5 mm
23.34 EUR
"For applications where thermal paste is not an option due to unmanageable application or where distances between heat source and cooling element need to be bridged, the Thermal Grizzly minus pad 8 is the ideal choice – for example on memory chips and voltage transformers. It is based on a silicon-containing supporting complex and aluminium oxide as a heat transfer medium – as well as thermal pastes and thus it is also similar in terms of performance.The minus pad 8 is available in three different dimensions – here 100 x 100 mm – as well as in four thicknesses between 0.5 and 2 millimetres, with the pads available already functioning excellently at a very low contact pressure and the thermal conductivity only marginally influenced by the thickness. The choice of the thickness should therefore only depend on the gap to be bridged.
Technical details:
- Dimensions 100 × 100 × 1.5 mm
- Number: 1
- Thermal conductivity: 8 W/(m·K)
- Application temperature: -100 to +200°C
THERMAL GRIZZLY TG-MP-A-1-1-05-2 - Minus Pad Advance, 100x100x0.5 mm, pack of 2
30.52 EUR
"The Thermal Grizzly Minus Pad Advance thermal pads are part of the Basic, Advance and Pro series. The Advanced pads are easy to use and offer better thermal conductivity and higher compressibility compared to the Basic pads.The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Very good thermal conductivity
- High compressibility
- Easy to use
- Electrically non-conductive
THERMAL GRIZZLY TG-MP8-120-05-1 - Minus Pad 8 – 120 x 20 x 0.5 mm
14.03 EUR
"For applications where thermal paste is not an option due to unmanageable application or where distances between heat source and cooling element need to be bridged, the Thermal Grizzly minus pad 8 is the ideal choice – for example on memory chips and voltage transformers. It is based on a silicon-containing supporting complex and aluminium oxide as a heat transfer medium – as well as thermal pastes and thus it is also similar in terms of performance.The minus pad 8 is available in three different dimensions – here 120 x 20 mm – as well as in four thicknesses between 0.5 and 2 millimetres, with the pads available already functioning excellently at a very low contact pressure and the thermal conductivity only marginally influenced by the thickness. The choice of the thickness should therefore only depend on the gap to be bridged.
Technical details:
- Dimensions 120 × 20 × 0.5 mm
- Number: 1
- Thermal conductivity: 8 W/(m·K)
- Application temperature: -100 to +200°C
THERMAL GRIZZLY TG-MP-P1220152 - Minus Pad Pro, 120x20x1.5 mm, pack of 2
40.86 EUR
"The Thermal Grizzly Minus Pad Pro thermal pads are part of the Basic, Advance and Pro series. The Pro Pads offer extremely high thermal conductivity and outstanding compressibility - at a slightly higher price. The series is based on the proven minus pad 8 and has been specifically developed to significantly improve thermal conductivity, compressibility and value for money. The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Excellent thermal conductivity
- Outstanding compressibility
- Easy to use
- Electrically non-conductive
THERMAL GRIZZLY TG-MP8-30-15-1 - Minus Pad 8 – 30 x 30 x 1.5 mm
13.52 EUR
"For applications where thermal paste is not an option due to unmanageable application or where distances between heat source and cooling element need to be bridged, the Thermal Grizzly minus pad 8 is the ideal choice – for example on memory chips and voltage transformers. It is based on a silicon-containing supporting complex and aluminium oxide as a heat transfer medium – as well as thermal pastes and thus it is also similar in terms of performance.The minus pad 8 is available in three different dimensions – here 30 x 30 mm – as well as in four thicknesses between 0.5 and 2 millimetres, with the pads available already functioning excellently at a very low contact pressure and the thermal conductivity only marginally influenced by the thickness. The choice of the thickness should therefore only depend on the gap to be bridged.
Technical details:
- Dimensions 30 × 30 × 1.5 mm
- Number: 1
- Thermal conductivity: 8 W/(m·K)
- Application temperature: -100 to +200°C
THERMAL GRIZZLY TG-MP-P-1-1-15 - Minus Pad Pro, 100x100x1.5 mm
53.88 EUR
"The Thermal Grizzly Minus Pad Pro thermal pads are part of the Basic, Advance and Pro series. The Pro Pads offer extremely high thermal conductivity and outstanding compressibility - at a slightly higher price. The series is based on the proven minus pad 8 and has been specifically developed to significantly improve thermal conductivity, compressibility and value for money. The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Excellent thermal conductivity
- Outstanding compressibility
- Easy to use
- Electrically non-conductive
THERMAL GRIZZLY TG-MP8-100-05-1 - Minus Pad 8 – 100 x 100 x 0.5 mm
38.37 EUR
"For applications where thermal paste is not an option due to unmanageable application or where distances between heat source and cooling element need to be bridged, the Thermal Grizzly minus pad 8 is the ideal choice – for example on memory chips and voltage transformers. It is based on a silicon-containing supporting complex and aluminium oxide as a heat transfer medium – as well as thermal pastes and thus it is also similar in terms of performance.The minus pad 8 is available in three different dimensions – here 100 x 100 mm – as well as in four thicknesses between 0.5 and 2 millimetres, with the pads available already functioning excellently at a very low contact pressure and the thermal conductivity only marginally influenced by the thickness. The choice of the thickness should therefore only depend on the gap to be bridged.
Technical details:
- Dimensions 100 × 100 × 0.5 mm
- Number: 1
- Thermal conductivity: 8 W/(m·K)
- Application temperature: -100 to +200°C
THERMAL GRIZZLY TG-MP-B-1-1-15-2 - Minus Pad Basic, 100x100x1.5 mm, pack of 2
25.35 EUR
"The Thermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance and Pro series. The basic pads are easy to use and offer good thermal conductivity, slightly lower compressibility and excellent value. The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Good thermal conductivity
- Lower compressibility
- Easy to use
- Electrically non-conductive
- Outstanding price-performance ratio
THERMAL GRIZZLY TG-MP8-30-05-1 - Minus Pad 8 – 30 x 30 x 0.5 mm
13.57 EUR
"For applications where thermal paste is not an option due to unmanageable application or where distances between heat source and cooling element need to be bridged, the Thermal Grizzly minus pad 8 is the ideal choice – for example on memory chips and voltage transformers. It is based on a silicon-containing supporting complex and aluminium oxide as a heat transfer medium – as well as thermal pastes and thus it is also similar in terms of performance.The minus pad 8 is available in three different dimensions – here 30 x 30 mm – as well as in four thicknesses between 0.5 and 2 millimetres, with the pads available already functioning excellently at a very low contact pressure and the thermal conductivity only marginally influenced by the thickness. The choice of the thickness should therefore only depend on the gap to be bridged.
Technical details:
- Dimensions 30 × 30 × 0.5 mm
- Number: 1
- Thermal conductivity: 8 W/(m·K)
- Application temperature: -100 to +200°C
THERMAL GRIZZLY TG-MP8-120-15-1 - Minus Pad 8 – 120 x 20 x 1.5 mm
16.1 EUR
"For applications where thermal paste is not an option due to unmanageable application or where distances between heat source and cooling element need to be bridged, the Thermal Grizzly minus pad 8 is the ideal choice – for example on memory chips and voltage transformers. It is based on a silicon-containing supporting complex and aluminium oxide as a heat transfer medium – as well as thermal pastes and thus it is also similar in terms of performance.The minus pad 8 is available in three different dimensions – here 120 x 20 mm – as well as in four thicknesses between 0.5 and 2 millimetres, with the pads available already functioning excellently at a very low contact pressure and the thermal conductivity only marginally influenced by the thickness. The choice of the thickness should therefore only depend on the gap to be bridged.
Technical details:
- Dimensions 120 × 20 × 1.5 mm
- Number: 1
- Thermal conductivity: 8 W/(m·K)
- Application temperature: -100 to +200°C
THERMAL GRIZZLY TG-MP8-12-2-15-2 - Minus Pad 8, 120x 20x 1.5 mm, pack of 2
16.62 EUR
"The high-performance thermal pads of the minus pad 8 series have a very elastic and adaptable surface with very high thermal conductivity. Even the smallest component differences can thus be very well compensated for. The easy-to-process and flexible minus pads consist of different components: They are based on a ceramic-silicone formula complex and nano-aluminium oxide. The pads therefore always ensure optimum heat transfer. Even the slightest contact pressure is sufficient for optimal attachment. All pads are environmentally friendly and RoHS-compliant.
- High thermal conductivity
- High compressibility
- Electrically insulating
THERMAL GRIZZLY TG-MP-P-1-1-05 - Minus Pad Pro, 100x100x0.5 mm
43.03 EUR
"The Thermal Grizzly Minus Pad Pro thermal pads are part of the Basic, Advance and Pro series. The Pro Pads offer extremely high thermal conductivity and outstanding compressibility - at a slightly higher price. The series is based on the proven minus pad 8 and has been specifically developed to significantly improve thermal conductivity, compressibility and value for money. The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Excellent thermal conductivity
- Outstanding compressibility
- Easy to use
- Electrically non-conductive
THERMAL GRIZZLY TG-MP-A-1-1-15-2 - Minus Pad Advance, 100x100x1.5 mm, pack of 2
33.62 EUR
"The Thermal Grizzly Minus Pad Advance thermal pads are part of the Basic, Advance and Pro series. The Advanced pads are easy to use and offer better thermal conductivity and higher compressibility compared to the Basic pads.The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Very good thermal conductivity
- High compressibility
- Easy to use
- Electrically non-conductive
THERMAL GRIZZLY TG-MP-B-1-1-05-2 - Minus Pad Basic, 100x100x0.5 mm, pack of 2
25.35 EUR
"The Thermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance and Pro series. The basic pads are easy to use and offer good thermal conductivity, slightly lower compressibility and excellent value. The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Good thermal conductivity
- Lower compressibility
- Easy to use
- Electrically non-conductive
- Outstanding price-performance ratio
THERMAL GRIZZLY TG-MP8-1-1-05-2 - Minus Pad 8 - 100x 100x 0.5 mm, pack of 2
25.4 EUR
"The high-performance thermal pads of the minus pad 8 series have a very elastic and adaptable surface with very high thermal conductivity. Even the smallest component differences can thus be very well compensated for. The easy-to-process and flexible minus pads consist of different components: They are based on a ceramic-silicone formula complex and nano-aluminium oxide. The pads therefore always ensure optimum heat transfer. Even the slightest contact pressure is sufficient for optimal attachment. All pads are environmentally friendly and RoHS-compliant.
- High thermal conductivity
- High compressibility
- Electrically insulating
PLUSTEK 0227 - Scanner, 35 mm, films, OpticFilm 8200i Ai
506.03 EUR
The Plustek OpticFilm 8200i Ai is a high-resolution slide/negative film scanner used by professional photographers, hobby photographers, graphic designers, photo laboratories and schools worldwide.The Plustek OpticFilm 8200i Ai is a professional film scanner with an optical resolution of 7200 dpi. The high-quality optics enable deep-focus images even in dark areas and remarkable results in colour accuracy. The built-in infrared channel helps to remove dust and scratches on the original negative or slide without additional post-processing. With the IT8 calibration template, it is possible to achieve colour-accurate and detailed images.
The OpticFilm 8200i Ai and the SilverFast software from LaserSoft Imaging offer the perfect combination of reliable hardware and professional software. The integrated Multi-Exposure® function-or multiple exposure-offers a method for increasing the dynamic range and plays a decisive role in ensuring a high level of quality. SilverFast iSRD® uses the infrared channel integrated in the device to remove dust and scratches on the surface of the sample.
PLUSTEK 0225 - Scanner, 35 mm, films, OpticFilm 8100
330.32 EUR
The Plustek OpticFilm 8100 is a high-resolution slide/negative film scanner used by professional photographers, hobby photographers, graphic designers, photo laboratories and schools worldwide.The Plustek OpticFilm 8100 is a versatile film scanner with an optical resolution of 7200 dpi. The LED light unit not only ensures precise colour rendering, but also low energy consumption. The two controls on the front panel can be operated with just one tap and make scanning even easier, e.g. for sharing on websites or social media such as Flickr, Facebook or Picasa.
The included SilverFast SE Plus 8 software in combination with the OpticFilm 8100 makes a perfect working tool for different applications. In addition, the integrated Multi-Exposure® function (multiple exposure) offers a method for increasing the dynamic range and plays a decisive role in ensuring a high level of quality.
Compared to conventional flatbed scanners, the compact design of the scanner requires considerably less room and thus saves a lot space.
BOPLA BOP 10.1 PQ-9016 - BoPad,285x198x61,2mm,IP65
56.88 EUR
"The versatile touch/operator panel enclosure convinces with a modern design and individual design elementsLowered surface (2.5 mm) in the upper part for mounting membrane keyboards or display panels
Integrated VESA mounting (75 x 75 mm), which is also used for mounting the optional wall bracket
The enclosures are designed for the integration of 7.0"" and 10.1"" touchscreens / displays.
Protection of the enclosure by optional impact protection, available in several colours.Ergonomic recessed grips on the enclosure and also on the impact protection.
Protection class IP 65 due to supplied design seal in enclosure colour
Colour White similar to RAL 9016
Material ABS, seal TPE
Scope of delivery: upper and lower part, 1 x seal, 6 x screws, 4 x rubber feet"
BOPLA BOP 10.1 PQ-9005 - BoPad,285x198x61,2mm,IP65
56.88 EUR
"The versatile touch/operator panel enclosure convinces with a modern design and individual design elementsLowered surface (2.5 mm) in the upper part for mounting membrane keyboards or display panels
Integrated VESA mounting (75 x 75 mm), which is also used for mounting the optional wall bracket
The enclosures are designed for the integration of 7.0"" and 10.1"" touchscreens / displays.
Protection of the enclosure by optional impact protection, available in several colours.Ergonomic recessed grips on the enclosure and also on the impact protection.
Protection class IP 65 due to supplied design seal in enclosure colour
Colour Black similar to RAL 9005
Material ABS, seal TPE
Scope of delivery: upper and lower part, 1 x seal, 6 x screws, 4 rubber feet."
RADEMACHER FPE1 150X100 - Photo PCB, epoxy, single-sided, 150x100 mm, 1.5 mm, 35 µ
13.21 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 233X160 - Photo PCB, epoxy, single-sided, 233x160 mm, 1.5 mm, 35 µ
18.21 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 100X75 - Photo PCB, epoxy, single-sided, 100x75 mm, 1.5 mm, 35 µ
11.6 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 300X200 - Photo PCB, epoxy, single-sided, 300x200 mm, 1.5 mm, 35 µ
22.66 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 250X250 - Photo PCB, epoxy, single-sided, 250x250 mm, 1.5 mm, 35 µ
23.7 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 500X500 - Photo PCB, epoxy, single-sided, 500x500 mm, 1.5 mm, 35 µ
66.08 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 160X100 - Photo PCB, epoxy, single-sided, 160x100 mm, 1.5 mm, 35 µ
13.67 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 200X150 - Photo PCB, epoxy, single-sided, 200x150 mm, 1.5 mm, 35 µ
16.31 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE2 100X75 - Photo PCB, epoxy, double-sided, 100x75 mm, 1.5 mm, 35 µ
12.12 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE2 300X200 - Photo PCB, epoxy, double-sided, 300x200 mm, 1.5 mm, 35 µ
26.18 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE2 200X150 - Photo PCB, epoxy, double-sided, 200x150 mm, 1.5 mm, 35 µ
18.84 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE2 160X100 - Photo PCB, epoxy, double-sided, 160x100 mm, 1.5 mm, 35 µ
14.5 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE2 233X160 - Photo PCB, epoxy, double-sided, 233x160 mm, 1.5 mm, 35 µ
21.22 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE2 250X250 - Photo PCB, epoxy, double-sided, 250x250 mm, 1.5 mm, 35 µ
31.86 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
WELLER SPITZE CT5A7 - Tip for W 60C, 1.6 mm
18.21 EUR
Replacement soldering tip for WELLER soldering iron W 61C• 370°C
• 1.6 mm
RADEMACHER FPE1 100X50 - Photo PCB, epoxy, single-sided, 100x50 mm, 1.5 mm, 35 µ
11.4 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
NEWLAND NEWL BS80801D - Barcode scanner, 1D, Bluetooth, BS80 Piranha II
185.61 EUR
"The BS80 Piranha II is a fast, small and portable barcode scanner that gives you the convenience of always having a scanner within easy reach. Its dimensions of 88 x 46 x 24.5 mm make it small enough to fit in your bag and light enough to carry all day. Despite its small size, the Piranha II continues to deliver outstanding performance and seamlessly scans the main 1D barcodes.Thanks to its wireless function, the Piranha II can be easily paired with a mobile computer, mobile phone, tablet or micro kiosk using Bluetooth. This adaptability and mobility make it a perfect solution for industries such as retail and warehouse management, as well as online-to-offline (O2O) applications such as electronic ticketing and electronic ordering.
Superior 1D reading performance
Featuring a snappy 1D engine, the BS80 Piranha II can read all the main 1D symbologies from both paper and screen.
Included in delivery
- Bluetooth scanner
IIYAMA IIY XUB2491HB1 - 61-cm monitor, 1080p, USB, pivot
143.18 EUR
"24"" (60.5-cm) monitor featuring IPS panel technology, 100-Hz refresh rate and a 150-mm height-adjustable standThe elegant edge-to-edge design makes the ProLite XUB2491H the perfect solution for multi-monitor setups. The 23.8"" (60.5-cm) monitor with IPS panel technology delivers accurate and consistent colour reproduction at wide viewing angles, high contrast and brightness levels, providing excellent performance for photographic and web design applications. The refresh rate of 100 Hz, together with the AdaptiveSync function, delivers an immediate, noticeable improvement in image quality. Featuring a headphone jack, HDMI and DisplayPort ports, a blue light reduction function to reduce eye fatigue and an ergonomic, height-adjustable 150-mm stand for perfect user comfort, this 24"" monitor is an excellent choice for multi-monitor configurations and office applications."
FLASHFORGE FF ADVENTURER5MP - 3D printer, Adventurer 5M Pro
489.44 EUR
"- Single extruder
- 1.75 mm PLA, PETG, TPU, ABS, ASA, PLA-CF, PETG-CF
- Max. printing size: 22 x 22 x 22 cm
- Heated bed
- Webcam
- Enclosed building area
- Ultra-fast printing
- Fast warm-up time: <10 minutes
- One-click levelling
- Quick and easy to change nozzles
- Internal and external filtration to protect your respiratory system
- Suitable for any room
- 50 dB quiet printing
- Power failure recovery
- Double-sided, flexible PEI steel plate
- Filament end warning
- Automatic shut-off
- Remote control by camera
The Adventurer 5M Pro is a versatile tool that can be used for parent-child activities, household repairs and creative teaching.
The fully enclosed design allows for quick and easy use while you enjoy printing.
Next-level speed
Boasting a top speed of 600 mm/s, the Adventurer 5M Pro raises the bar for high-speed 3D printing and enables most objects to be printed in just a few hours."
RADEMACHER FPE2 100X50 - Photo PCB, epoxy, double-sided, 100x50 mm, 1.5 mm, 35 µ
11.55 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue