PUREMOUNTS PM-SOCKS-20G-50 - Plastic braided cable sleeve, Ø 20 mm, grey, 50 m
PureMounts polyester cable hose (self-retracting) in a 50-m reel - grey
Universal cable hose without Velcro fastening
The cable hoses provide safe, uncomplicated and visually inconspicuous routing of your cables.
With a maximum diameter of 20 mm and a length of 50 m (on a reel), the cable hose can accommodate a large number of cables, depending on the cable diameter.
The cable hoses are fire-resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically retracts again when stretched.
Easy installation
Simply pull the cables through the hose and route them accordingly - done!
EAN: 4260134125918
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
Universal cable hose without Velcro fastening
The cable hoses provide safe, uncomplicated and visually inconspicuous routing of your cables.
With a maximum diameter of 20 mm and a length of 50 m (on a reel), the cable hose can accommodate a large number of cables, depending on the cable diameter.
The cable hoses are fire-resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically retracts again when stretched.
Easy installation
Simply pull the cables through the hose and route them accordingly - done!
Universal cable scarf with velcro fastener
The cable conduits are used for safe, uncomplicated and visually unobtrusive installation of your cables.
With a max. diameter of 20 mm and a length of 180 cm, the cable conduit can hold a great many cables, depending on the cable diameter.
The cable conduits are fire resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically contracts again when stretched.
In addition, this cable conduit has a velcro fastener, with which you can very advantageously
be able to determine the real diameter for different cable quantities.
Easy mounting
Simply pull the cables through the hose, close the Velcro fastener and lay them accordingly, finished!
Universal cable sleeve without Velcro fastener
The cable conduits serve a safe, uncomplicated and optically inconspicuous laying of your cables.
With a max. diameter of 20mm and a length of 180cm, the cable conduit can accommodate many cables, depending on the cable diameter.
The cable conduits are fire-resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically contracts again when stretched.
In addition, this cable conduit has a Velcro fastener, with which you can extremely advantageously
be able to determine the real diameter for different cable quantities.
Simple assembly
Simply pull the cables through the hose, close the Velcro fastener and lay them accordingly, done!
Universal cable hose with Velcro fastener
The cable hoses provide safe, uncomplicated and visually inconspicuous routing of your cables.
With a maximum diameter of 85 mm and a length of 50 m (on a reel), the cable hose can accommodate a large number of cables, depending on the cable diameter.
The cable hoses are fire-resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically retracts again when stretched.
In addition, this cable hose has an extremely beneficial Velcro fastener which allows you to determine the real diameter for different amounts of cable.
Easy installation
Simply pull the cables through the hose, close the Velcro fastener and route them accordingly - done!
123 x 71 x 26 mm, grey
Choose the height and colour combination to suit your requirements
• Combine two of the same half shells or two different half shells to make one ABS housing.
• Choose from the following four different half-shell housing combinations:
123 x 71 x 14,5 mm grey (see accessories) item no. SD 10 GR HALB
123 x 71 x 14,5 mm black (see accessories) item no. SD 10 SW HALB
123 x 71 x 26 mm grey (see accessories) item no. SD 20 GR HALB
123 x 71 x 26 mm black (see accessories) item no. SD 20 SW HALB
• The two housing shells are connected to each other by a snap fastener.
• The half shells feature guides and standoffs for PC boards.
Included in delivery: 1x plastic half-shell housing
Universal cable hose without Velcro fastening
The cable hoses provide safe, uncomplicated and visually inconspicuous routing of your cables.
With a maximum diameter of 20 mm and a length of 50 m (on a reel), the cable hose can accommodate a large number of cables, depending on the cable diameter.
The cable hoses are fire-resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically retracts again when stretched.
Easy installation
Simply pull the cables through the hose and route them accordingly - done!
- Suitable for industrial and craft sectors
- For a wide variety of materials, such as wood, paper, cardboard, textiles, glass, ceramics, metal and many plastics, e.g. ABS, melamine, PA, PC, PE, PET, PMMA, POM, PP, PVC and rigid PVC
- Load bearing after approx. 60 - 90 sec.
- Set after approx. 15 sec.
- Processing temperature: 190°C
Processing: with GluePRO 300 and GluePRO 400 LCD
Diameter/length: 11 mm/300 mm
Content: 20 pieces
Net weight: 600 g
Miscellaneous: solvent-free
For cutting thin-walled plastic tubes (e.g. plastic armoured flexible tubing) and hoses, including fabric-reinforced tubing, made of plastic and rubber up to 25 mm outer diameter. Not suitable for cutting cabling. With opening spring and safety catch. Tool body: plastic, glass-fibre-reinforced. Knife: special tool steel, oil-hardened, replaceable
Specification
• Thermal pad for heat dissipation
• Colour: grey
• Dimensions (LxWxH): ca.
1) 70 x 20 x 1.75 mm
2) 70 x 20 x 0.75 mm
System requirements
• M.2 module
Package content
• 2 x self-adhesive thermal pad
Package
• Poly bag
Application:
Body work, e.g. for damage-free loosening of trim strips, trims, lettering etc.
- Plastic
- Made In Germany
- Dimensions / Length: 190 mm x 25 mm x 25 mm
- Net weight (kg): 0.07 kg
Technical data
General information
Series: LC 60W 900-1750mA flexC SR EXC
Enclosure: closed, plastic
Dimensions L x W x H (mm): 220 x 85 x 31
Weight: 278 g
Operating expectancy: 100,000 hours
Operating temperature: -25°C - 50°C
Storage temperature: -40°C - 80°C
Manufacturer's warranty: 5 years
Input
AC input voltage: 198 V - 264 V
DC input voltage: 176 V - 270 V
Mains frequency: 50/60 Hz
Inrush current: 0.306 A
Efficiency: 90%
Max. inrush current: 25.9 A
Connection input: plugin terminal
Output
Number of outputs: 1
Output power: 60 W
Output voltage: 20 V - 54 V
Max. output current: 1.75 A
Output current selectable: yes
Connection output: plugin terminal
Security
Short-circuit protector: yes
Overload protection: yes
Over-voltage protection: no
Overheating protection: yes
Degree of protection/class: IP20/II
Note
Power supply for operating LED light sources.
Supplied with strain relief kit for independent applications.
Inner dimensions: 150 x 105 x 80 mm
Ext. 164 x 121 x 87 mm
Wall-mounted enclosure with flat cover
Screw lock with captive plastic screws (slot)
Certifications: DEMKO, SEMKO, TÜV
Fire resistance of 650°
ABS (acrylonitrile butadiene styrene), storage/operating ambient temperature (-15 to 40°C)/(-25 to 60°C)
IP66 (NEMA 4.4X), IK07, RAL 7035 grey, insulation class II
fine-stranded copper conductors and facilitate insertion into terminals. The earth of the bootlace ferrules
complies with DIN 46228-4.
The bootlace ferrule is UL certified for the USA and Canada.
The electrolytic copper (E-CU) metal sleeve has zinc plating.
The polypropylene (PP) plastic sleeve makes it easier to insert the conductors, is resistant up to a temperature of +105°C
and is available according to German, French or DIN 46228-4 colour code
.
Properties: suitable for fixed installation on, in and under plaster, in dry or damp rooms. Can also be used outdoors (without direct sunlight), but not intended for underground installation.
Technical data
General information
Series: LC 100W 1100-2100mA flexC SR EXC
Enclosure: closed, plastic
Dimensions L x W x H (mm): 235 x 100 x 31
Weight: 351 g
Operating expectancy: 100,000 hours
Operating temperature: -25°C - 50°C
Storage temperature: -40°C - 80°C
Manufacturer's warranty: 5 years
Input
AC input voltage: 198 V - 264 V
DC input voltage: 176 V - 270 V
Mains frequency: 50/60 Hz
Inrush current: 0.482 A
Efficiency: 92%
Max. inrush current: 50.6 A
Connection input: plugin terminal
Output
Number of outputs: 1
Output power: 100 W
Output voltage: 20 V - 54 V
Max. output current: 2.1 A
Output current selectable: yes
Connection output: plugin terminal
Security
Short-circuit protector: yes
Overload protection: yes
Over-voltage protection: no
Overheating protection: yes
Degree of protection/class: IP20/II
Note
Power supply for operating LED light sources.
Supplied with strain relief kit for independent applications.
• Nominal current: 20A
• Repetitive peak reverse voltage: 30...50V
• Weight approx: 2.0 g
• Plastic case:Ø 8 x 7.5 [mm]
• Plastic material has UL classification 94V-0
• Standard packaging taped in ammo pack
With ceramic socket and plastic bulb, average life of 20,000 hours, non-dimmable, diameter 18 mm, length 54 mm, for 230-V mains voltage
With ceramic socket and matte plastic bulb, average life of 20,000 hours, non-dimmable, diameter 16.5 mm, length 49 mm, for 230-V mains voltage
Hook-and-loop fastener
The hook-and-loop fastener allows multiple opening and closing of the braided sleeving.
Brilliant resistance
The braided sleeving is characterized by its abrasion resistance and heat resistance.
Reusable
The cables and tubes can be added or removed multiple times.
Cuttable
A hot cutting tool can help to shorten the length of the braided sleeving individually.
Specification
- Length: ca. 2 m
- Diameter: ca. 19 mm
- Bundle diameter: max. 12 mm
- Environmental temperature: -40 °C ~ 125 °C
- Reusable
- Material: polyester
- Fire-resistance rating: 94V-2, VW-1
- Color: black
Package content
- Braided sleeving
With ceramic socket and plastic bulb, average life of 20,000 hours, non-dimmable, diameter 18 mm, length 54 mm, for 230-V mains voltage
Technical data
General information
Series: YSL20F-15 W
Enclosure: closed, plastic
Dimensions L x W x H (mm): 103 x 35.5 x 16.5
Weight: 85 g
Operating life expectancy: 30,000 hours
Operating temperature: -20°C to 45°C
Storage temperature: -40°C to 85°C
Manufacturer warranty: 5 years
Input
AC input voltage: 220 V - 240 V
Mains frequency: 50/60 Hz
Inrush current: 0.4 A
Efficiency: 88%
Idle power: less than 0.5 W
Max. inrush current: 65 A
Input connection: screw terminal
Output
Number of outputs: 1
Output power: 15 W
Output voltage: 24 V
Max. output current: 0.625 A
Output current selectable: no
Output connection: screw terminal
Ripple: 400 mVp-p
Safety
Short-circuit protection: yes
Overload protection: yes, hiccup
Over-voltage protection: yes
Overheating protection: no
Degree of protection/class: IP20/II
Note
Power supply for operating LED light sources.
With ceramic socket and plastic bulb, average life of 20,000 hours, non-dimmable, diameter 16 mm, length 54 mm, for 230-V mains voltage
- Impedance: 16±20% ohms
- Power (nominal): 0.2 W
- Power (maximum): 0.4 W
- Resonant frequency: 550±25% Hz
- Sound pressure level: 82±3 dB
- Frequency range: fo - 4000 Hz
- Operating temperature: -10 - +55°C
- Storage temperature: -20 - +60°C
Integrated zip fastener
Due to the simple and easy handling of the zip fastener, the cables can be added and removed several times.
Brilliant resistance
The braided sleeve is characterized by its high abrasion resistance, flexibility and heat resistance.
• Length: ca. 1 m
• Diameter: ca. 20 mm
• Bundle diameter: max. 15 mm
• Environmental temperature: -50 °C ~ 150 °C
• Reusable
• Material: polyester
• Fire-resistance rating: VW-1
• Colour: black
Package content
• Braided sleeving
Package
• Zip poly bag
Universal cable scarf with velcro fastener
The cable conduits are used for safe, uncomplicated and visually unobtrusive installation of your cables.
With a max. diameter of 20 mm and a length of 180 cm, the cable conduit can hold a great many cables, depending on the cable diameter.
The cable conduits are fire resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically contracts again when stretched.
In addition, this cable conduit has a velcro fastener, with which you can very advantageously
be able to determine the real diameter for different cable quantities.
Easy mounting
Simply pull the cables through the hose, close the Velcro fastener and lay them accordingly, finished!
Stretchable
The braided sleeving is very stretchable, which allows multiple cables with different diameter to be accommodated.
Brilliant resistance
The braided sleeving is characterized by its abrasion resistance and heat resistance.
Reusable
The cables and tubes can be added or removed multiple times.
Cuttable
A hot cutting tool can help to shorten the length of the braided sleeving individually.
Specification
- Length: ca. 5 m
- Diameter: ca. 19 mm
- Cable diameter:
- min.: 14 mm
- max.: 30 mm
- Environmental temperature: -40 °C ~ 125 °C
- Reusable
- Material: polyester
- Fire-resistance rating: 94V-2, VW-1
- Color: black
Package content
- Braided sleeving
With ceramic socket and plastic bulb, average life of 20,000 hours, non-dimmable, diameter 16 mm, length 50mm, for 230-V mains voltage
Technical data
General information
Series: LC 25W 350-1050mA flexC SR EXC
Enclosure: closed, plastic
Dimensions L x W x H (mm): 200 x 70 x 31
Weight: 186 g
Operating expectancy: 100,000 hours
Operating temperature: -25°C - 55°C
Storage temperature: -40°C - 80°C
Manufacturer's warranty: 5 years
Input
AC input voltage: 198 V - 264 V
DC input voltage: 176 V - 270 V
Mains frequency: 50/60 Hz
Inrush current: 0.133 A
Efficiency: 86%
Max. inrush current: 16 A
Connection input: plugin terminal
Output
Number of outputs: 1
Output power: 25 W
Output voltage: 20 V - 50 V
Max. output current: 1.05 A
Output current selectable: yes
Connection output: plugin terminal
Security
Short-circuit protector: yes
Overload protection: yes
Over-voltage protection: no
Overheating protection: yes
Degree of protection/class: IP20/II
Note
Power supply for operating LED light sources.
Supplied with strain relief kit for independent applications.
Integrated zip fastener
Due to the simple and easy handling of the zip fastener, the cables can be added and removed several times.
Brilliant resistance
The braided sleeve is characterized by its high abrasion resistance, flexibility and heat resistance.
• Length: ca. 2 m
• Diameter: ca. 20 mm
• Bundle diameter: max. 15 mm
• Environmental temperature: -50 °C ~ 150 °C
• Reusable
• Material: polyester
• Fire-resistance rating: VW-1
• Colour: black
Package content
• Braided sleeving
Package
• Zip poly bag
With ceramic socket and plastic bulb, average life of 20,000 hours, non-dimmable, diameter 16 mm, length 50mm, for 230-V mains voltage
Self-closing
The braided sleeving closes automatically after adding the cables.
Brilliant resistance
The braided sleeving is characterized by its abrasion resistance and heat resistance.
Reusable
The cables and tubes can be added or removed multiple times.
Cuttable
A hot cutting tool can help to shorten the length of the braided sleeving individually.
Specification
- Length: ca. 2 m
- Diameter: ca. 9 mm
- Bundle diameter: max. 10 mm
- Environmental temperature: -40 °C ~ 125 °C
- Reusable
- Material: polyester
- Fire-resistance rating: 94V-2, VW-1
- Color: black
Package content
- Braided sleeving
Universal cable scarf with velcro fastener
The cable conduits are used for safe, uncomplicated and visually unobtrusive installation of your cables.
With a max. diameter of 20 mm and a length of 180 cm, the cable conduit can hold a great many cables, depending on the cable diameter.
The cable conduits are fire resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically contracts again when stretched.
In addition, this cable conduit has a velcro fastener, with which you can very advantageously
be able to determine the real diameter for different cable quantities.
Easy mounting
Simply pull the cables through the hose, close the Velcro fastener and lay them accordingly, finished!
With ceramic socket and matte plastic bulb, average life of 20,000 hours, non-dimmable, diameter 16.5 mm, length 49 mm, for 230-V mains voltage
Technical data
General information
Series: YSL20F-15 W
Enclosure: closed, plastic
Dimensions L x W x H (mm): 103 x 35.5 x 16.5
Weight: 85 g
Operating life expectancy: 30,000 hours
Operating temperature: -20°C to 45°C
Storage temperature: -40°C to 85°C
Manufacturer warranty: 5 years
Input
AC input voltage: 220 V - 240 V
Mains frequency: 50/60 Hz
Inrush current: 0.4 A
Efficiency: 88%
Idle power: less than 0.5 W
Max. inrush current: 65 A
Input connection: screw terminal
Output
Number of outputs: 1
Output power: 15 W
Output voltage: 12 V
Max. output current: 1.25 A
Output current selectable: no
Output connection: screw terminal
Ripple: 400 mVp-p
Safety
Short-circuit protection: yes
Overload protection: yes, hiccup
Over-voltage protection: yes
Overheating protection: no
Degree of protection/class: IP20/II
Note
Power supply for operating LED light sources.
Universal cable hose without Velcro fastener
The cable hoses provide safe, uncomplicated and visually inconspicuous routing of your cables.
With a maximum diameter of 20 mm and a length of 180 cm, the cable hose can accommodate a large number of cables, depending on the cable diameter.
The cable hoses are fire-resistant and can also be used in extreme environments (-45°C to +50°C).
The material is polyester (very flexible), which automatically retracts again when stretched.
Easy installation
Simply pull the cables through the hose and route them accordingly - done!
Technical data
General information
Series: YSL20F-20 W
Enclosure: closed, plastic
Dimensions L x W x H (mm): 103 x 35.5 x 16.5
Weight: 85 g
Operating life expectancy: 30,000 hours
Operating temperature: -20°C to 45°C
Storage temperature: -40°C to 85°C
Manufacturer warranty: 5 years
Input
AC input voltage: 220 V - 240 V
Mains frequency: 50/60 Hz
Inrush current: 0.4 A
Efficiency: 88%
Idle power: less than 0.5 W
Max. inrush current: 65 A
Input connection: screw terminal
Output
Number of outputs: 1
Output power: 20 W
Output voltage: 24 V
Max. output current: 0.833 A
Output current selectable: no
Output connection: screw terminal
Ripple: 400 mVp-p
Safety
Short-circuit protection: yes
Overload protection: yes, hiccup
Over-voltage protection: yes
Overheating protection: no
Degree of protection/class: IP20/II
Note
Power supply for operating LED light sources.
• Length: ca. 1 m
• Width: ca. 20 mm
• Quantity: 1 piece per poly bag
• Hook-and-loop fastener for multiple reuse
• Colour: grey
Package content
• Hook and loop tape roll
Package
• Zip poly bag
Connectors
- Connector material: plastic, metal housing
- Shielding: Yes
- Connection 1: RJ45
- Connection 2: RJ45
- Dimensions A.1: 14.4 x 11.8 x 41.00 mm
- Dimensions A.2: 14.4 x 11.8 x 41.00 mm
- Contacts: gold plated
Cable
- Type: round cable
- Inner conductor material: copper
- AWG: AWG27
- Outer jacket material: LSZH
- Diameter outer sheath: 5.8 mm
The IQ-PC1000-0025 is a 0.25 meter Cat.6A Ethernet patch cable from PureLink's IQ series, equipped with RJ45 connectors as well as a halogen-free jacket.
Due to the halogen-free manufacturing of the cable, it causes less smoke in case of fire (LSZH).
The cable, with an outer diameter of 5.8mm, enables data transmission speeds of up to 10,000 Mbps (10 Gigabit / second) with an operating frequency of up to 500MHz.
It also features S/FTP shielding, high-purity copper strands and gold-plated precision mating contacts.
