ODROID M1 8GB - Odroid M1, 4x 2 GHz, 8 GB RAM
The ODROID-M1 is a single board computer designed for use in a variety of embedded system applications.
Technical data
- Rockchip RK3568B2 processor
- 8 GB LPDDR4-RAM
- Micro USB 2.0
- 2x USB 2.0 / 2x USB 3.0
- IR receiver
- Ethernet port RJ45 (10/100/1000)
- HDMI 2.0
- 40x GPIO pins
- microSD slot
- native SATA 3.0 port for use with 2.5-inch NAND hard disk or SSD storage devices
- SATA power supply (5 volts only)
- 3.5 mm audio connector
- Mono speaker output (1.3 W at 8 ohm load)
- M.2 NVMe storage device (M-Key PCIe3.0 2 lane standard size 22 x 80 mm)
- 2-way MIPI-CSI / 4-way MIPI-DSI
- eMMC module socket
- 16 MB SPI flash
- Power and reset jumper
- SPI / UART
- DC-DC socket (12V/2A)
- RTC backup battery holder with DC socket (DC input: 7.5 V ~ 15.5 V)
- Dimensions (LxWxH): 90 x 122 x 16 mm
Note
We recommend to operate your ODROID-M1 with a high quality 12V/2A power supply.
external links
http://forum.odroid.com (forum)
http://hardkernel.com (manufacturer)
http://magazine.odroid.com (magazine)
https://wiki.odroid.com/odroid-m1/odroid-m1 (Software)
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
- ARM Cortex-A76 and Cortex-A55 Octa-Core architecture
- Energy-efficient design and compact form factor
- integrated 64 GB eMMC memory for fast data processing
- 8 GB LPDDR5 RAM for demanding applications
- multiple input and output connections for expandability
The ODROID-M2 impresses with its high performance and energy efficiency. With its ARM Cortex-A76 and Cortex-A55 processors, it offers an optimum combination of computing power and low power consumption. The integrated 64 GB eMMC memory enables fast data transfers and together with 8 GB LPDDR5 RAM, the device is suitable for memory-intensive applications. The slim design and numerous connection options make the ODROID-M2 a flexible solution for various application scenarios.
Technical data
- Processor: Rockchip RK3588S2
- Quad-Core Cortex-A76 (2.3 GHz +/- 0.1 GHz)
- Quad-Core Cortex-A55 (1.8 GHz)
- ARMv8-A architecture with neon and crypto extensions
- Mali-G610 GPU MP4 (1 GHz)
- Memory architecture:
- 64 KB L1 instruction cache, 64 KB L1 data cache, 512 KB L2 cache, shared by Cortex-A76 processor
- 32 KB L1 instruction cache, 32 KB L1 data cache, 128 KB L2 cache, shared by Cortex-A55 processor
- L3 data cache: 3 MB, shared by 8 processors
- NPU: 6 TOPS@INT8, integrated AI accelerator RKNN NPU
- Memory: LPDDR5 8 with 64-bit bus width
- Memory:
- 1 x 64 GB eMMC (soldered on the board)
- 1 x MicroSD slot (UHS-I SDR104)
- Boot priority selectable between eMMC and microSD via slide switch
- 1 x NVMe M.2 SSD (PCIe 2.1 x 1 lane)
- Network: 1 x GbE port (RJ45, supports 10/100/1000 Mbps)
- Green LED: Flashing for data traffic with 100 Mbps connection
- Yellow LED: Flashing for data traffic with 1000 Mbps connection
- Video output:
- 1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
- 1 x MIPI DSI interface (30-pin connector, different from the 31-pin connector of the ODROID-M1)
- 1 x DP (via USB Type-C port)
- External I/O:
- 1 x USB 2.0 host port
- 1 x USB 3.0 host port
- 1 x USB 3.0 Type-C (data communication and DP Alt-Mode, no power source/sink)
- 1 x debug serial console (UART)
- 1 x 40 pin GPIO and 1 x 14 pin GPIO
- Real-time clock (RTC):
- Onboard low-power PCF8536 RTC chip
- CR2032 RTC backup battery holder, keeps time and date for up to 10 years without...
The Raspberry Pi 400 is a keyboard with integrated Raspberry Pi 4 B with 4 GB memory, similar to the Commodore 64 (C64) from the 80s, but a little bit more powerful.
But not just a normal Raspberry Pi 4 B was integrated into the Raspberry Pi keyboard, but a completely new board layout was developed especially for this purpose. In addition, the speed has been increased from 1.5 GHz to 1.8 GHz, due to the good cooling performance of the cooling plate inside the keyboard. Only the CSI and DSI connectors have been omitted in the new Pi 4 layout.
Currently, the Pi 400 is available as a stand-alone version or as a complete set - the so-called kit.
The Pi 400 stand-alone version is interesting for all those who already have a mouse, a power supply and a micro-SD memory card. However, in this case the software has to be downloaded and installed first and also the accompanying booklet is not included.
The Pi 400 kit in turn contains everything you need to get started. Simply connect the included power supply and mouse as well as a monitor or TV via HDMI, then switch on and, thanks to the pre-installed software, get started immediately - surfing the Internet, programming or starting a new project.
Technical data
• 1.8 GHz quad-core ARM Cortex-A72 CPU
• 4 GB LPDDR4-3200 DRAM
• VideoCore VI graphics (OpenGL ES 3.1, volcano)
• 4kp60 HEVC decoding
• Gigabit LAN (10/100/1000)
• 2x USB 3.0 / 1x USB 2.0
• 2x microHDMI (1x 4kp60 or 2x 4kp30)
• Power supply via USB-C (5 V @ 3 A)
• Raspberry Bi-compatible 40-pin GPIO connector
Scope of delivery
• Raspberry Pi 400 (keyboard (red/white) incl. Raspberry Pi 4 B with 4 GB)
Note
The keyboard of the Pi 400 can be exchanged for another keyboard layout if required. You can see how this works in our magazine at https://www.reichelt.de/magazin/
The stand-alone version, as well as the kit, is available in different languages or with different keyboard layouts (DE / UK / FR / IT / ES / US)
The Raspberry Pi 400 is a keyboard with integrated Raspberry Pi 4 B with 4 GB memory, similar to the Commodore 64 (C64) from the 80s, but a little bit more powerful.
But not just a normal Raspberry Pi 4 B was integrated into the Raspberry Pi keyboard, but a completely new board layout was developed especially for this purpose. In addition, the speed has been increased from 1.5 GHz to 1.8 GHz, due to the good cooling performance of the cooling plate inside the keyboard. Only the CSI and DSI connectors have been omitted in the new Pi 4 layout.
Currently, the Pi 400 is available as a stand-alone version or as a complete set - the so-called kit.
The Pi 400 stand-alone version is interesting for all those who already have a mouse, a power supply and a micro-SD memory card. However, in this case the software has to be downloaded and installed first and also the accompanying booklet is not included.
The Pi 400 kit in turn contains everything you need to get started. Simply connect the included power supply and mouse as well as a monitor or TV via HDMI, then switch on and, thanks to the pre-installed software, get started immediately - surfing the Internet, programming or starting a new project.
Technical data
• 1.8 GHz quad-core ARM Cortex-A72 CPU
• 4 GB LPDDR4-3200 DRAM
• VideoCore VI graphics (OpenGL ES 3.1, volcano)
• 4kp60 HEVC decoding
• Gigabit LAN (10/100/1000)
• 2x USB 3.0 / 1x USB 2.0
• 2x microHDMI (1x 4kp60 or 2x 4kp30)
• Power supply via USB-C (5 V @ 3 A)
• Raspberry Bi-compatible 40-pin GPIO connector
Scope of delivery
• Raspberry Pi 400 (keyboard (red/white) incl. Raspberry Pi 4 B with 4 GB)
Note
The keyboard of the Pi 400 can be exchanged for another keyboard layout if required. You can see how this works in our Youtube channel at https://youtu.be/iS6WQ535Rf0.
The stand-alone version, as well as the kit, is available in different languages or with different keyboard layouts (DE / UK / FR / IT / ES / US)
Slim, stylish and fully equipped for digital drawing wherever you go
- Stand-alone drawing device with Android - no computer required
- Quick Draw: Instantly launch the Wacom Canvas with a tap of the pen
- Compact, slim and stylish design for mobile, everyday use
- Wacom Pro Pen 3 included - battery-free, precise and customisable
- Brushed glass surface for a natural, paper-like drawing experience
- Seamless workflow: Sketch in Wacom Canvas, finish in Clip Studio Paint DEBUT
- Wacom Shelf keeps all your sketches, artworks and reference materials organised
- Compatible with third-party pens such as LAMY, Staedtler, Kaweco and more
One functions as an HD media player with external hard disk for the home cinema or as an Internet radio with display, the next as a webcam server for camera surveillance with live streaming to the cell phone, then another for home automation such as heating or lighting control and yet another as a simple WLAN printer server or as a mini-computer for general Internet surfing, to name just a few application scenarios.
As you can see, the little ''jack-of-all-trades'' can not only do a lot, but is also extremely inexpensive and that's what makes it so attractive. All you need to bring along is a penchant for programming and not even that, because you can also simply program it according to instructions from forums or books, or simply install a ready-made image on the Raspberry Pi - go for it!
What's new about the Raspberry Pi 4 B?
Old Raspberry Pi 3 B+
• 1.4 GHz ARM Cortex-A53 quad-core CPU
• 1 GB LPDDR2 SDRAM
• Gigabit LAN RJ45 (via USB 2.0 with up to 300 Mbit)
• Bluetooth 4.2
• 4x USB 2.0
• 1x HDMI (1080p @60fps) H.264
• 5V/2.5A @ microUSB
New Raspberry Pi 4 B
• 1.8 GHz ARM Cortex-A72 quad-core CPU
• 1 GB, 2 GB or 4 GB LPDDR4 SDRAM
• Gigabit LAN RJ45 (up to 1000 Mbit)
• Bluetooth 5.0
• 2.4 GHz and 5 GHz IEEE 802.11 b/g/n/ac Wireless LAN
• 2x USB 2.0 / 2x USB 3.0
• 2x microHDMI (1x 4k @60fps or 2x 4k @30fps) H.265/H.264
• 5V/3A @ USB Type-C
There are the following 4 different variants
• Raspberry Pi 4 B 1GB with 1 GB memory (ArtNo.: RASP PI 4 B 1GB)
• Raspberry Pi 4 B 2GB with 2 GB memory (ArtNo.: RASP PI 4 B 2GB)
• Raspberry Pi 4 B 4GB with 4 GB memory (ArtNo.: RASP PI 4 B 4GB)
• Raspberry Pi 4 B 8GB with 8 GB RAM (ArtNo.: RASP PI 4 B 8GB)
Important note
Due to the other connections, such as 2x microHDMI instead of 1x HDMI and USB Type-C instead of microUSB, but also due to the exchange of LAN port and USB port, new housings are required (see accessories). The board now also requires a power supply unit with a USB Type-C connection with at least 5V/3A (see accessories) and no longer a microUSB power supply unit with 5V/2.5A. Otherwise, the existing accessories are fully compatible with the new Raspberry Pi.
Notes:
• For full functionality you need the latest software, which can be found at www.raspberrypi.org or in our online store
• It is recommended to use the original or an equivalent power supply (without E-Market cable) to avoid possible problems with the USB-C port.
• We recommend operating the Raspberry Pi with a heat sink to avoid possible overheating. We also recommend operating the...
- ARM Cortex-A76 and Cortex-A55 Octa-Core architecture
- Energy-efficient design and compact form factor
- integrated 64 GB eMMC memory for fast data processing
- 16 GB LPDDR5 RAM for demanding applications
- multiple input and output connections for expandability
The ODROID-M2 impresses with its high performance and energy efficiency. With its ARM Cortex-A76 and Cortex-A55 processors, it offers an optimum combination of computing power and low power consumption. The integrated 64 GB eMMC memory enables fast data transfers and together with 16 GB LPDDR5 RAM, the device is suitable for memory-intensive applications. The slim design and numerous connection options make the ODROID-M2 a flexible solution for various application scenarios.
Technical data
- Processor: Rockchip RK3588S2
- Quad-Core Cortex-A76 (2.3 GHz +/- 0.1 GHz)
- Quad-Core Cortex-A55 (1.8 GHz)
- ARMv8-A architecture with neon and crypto extensions
- Mali-G610 GPU MP4 (1 GHz)
- Memory architecture:
- 64 KB L1 instruction cache, 64 KB L1 data cache, 512 KB L2 cache, shared by Cortex-A76 processor
- 32 KB L1 instruction cache, 32 KB L1 data cache, 128 KB L2 cache, shared by Cortex-A55 processor
- L3 data cache: 3 MB, shared by 8 processors
- NPU: 6 TOPS@INT8, integrated AI accelerator RKNN NPU
- Memory: LPDDR5 16 with 64-bit bus width
- Memory:
- 1 x 64 GB eMMC (soldered on the board)
- 1 x MicroSD slot (UHS-I SDR104)
- Boot priority selectable between eMMC and microSD via slide switch
- 1 x NVMe M.2 SSD (PCIe 2.1 x 1 lane)
- Network: 1 x GbE port (RJ45, supports 10/100/1000 Mbps)
- Green LED: Flashing for data traffic with 100 Mbps connection
- Yellow LED: Flashing for data traffic with 1000 Mbps connection
- Video output:
- 1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
- 1 x MIPI DSI interface (30-pin connector, different from the 31-pin connector of the ODROID-M1)
- 1 x DP (via USB Type-C port)
- External I/O:
- 1 x USB 2.0 host port
- 1 x USB 3.0 host port
- 1 x USB 3.0 Type-C (data communication and DP Alt-Mode, no power source/sink)
- 1 x debug serial console (UART)
- 1 x 40 pin GPIO and 1 x 14 pin GPIO
- Real-time clock (RTC):
- Onboard low-power PCF8536 RTC chip
- CR2032 RTC backup battery holder, keeps time and date for up to 10 years...
CL14 - black (CMK8GX4M1A2400C14)
Vengeance LPX memory is designed for high-performance overclocking. The heatspreader is made of pure aluminum for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential.
The DDR4 form factor is optimized for the latest Intel X99 Series motherboards and offers higher frequencies, greater bandwidth, and lower power consumption than DDR3 modules. Vengeance LPX DDR4 modules are compatibility-tested across X99 Series motherboards for reliably fast performance. There’s XMP 2.0 support for trouble-free automatic overclocking. And, they’re available in multiple colors to match your motherboard, your components, or just your style.
Specifications
- Memory: 8 GB (1 x 8 GB)
- Speed: 2400 MHz
- Tested Latency: CL 14 (14-16-16-31)
- Voltage: 1,2 V
- Format: Unbuffered DIMM
- Pin Out: 288 Pin
- Intel XMP 2.0
- Heatspreader: Anodized Aluminum
The Raspberry Pi 400 is a keyboard with integrated Raspberry Pi 4 B with 4 GB memory, similar to the Commodore 64 (C64) from the 80s, but a little bit more powerful.
But not just a normal Raspberry Pi 4 B was integrated into the Raspberry Pi keyboard, but a completely new board layout was developed especially for this purpose. In addition, the speed has been increased from 1.5 GHz to 1.8 GHz, due to the good cooling performance of the cooling plate inside the keyboard. Only the CSI and DSI connectors have been omitted in the new Pi 4 layout.
Currently, the Pi 400 is available as a stand-alone version or as a complete set - the so-called kit.
The Pi 400 stand-alone version is interesting for all those who already have a mouse, a power supply and a micro-SD memory card. However, in this case the software has to be downloaded and installed first and also the accompanying booklet is not included.
The Pi 400 kit in turn contains everything you need to get started. Simply connect the included power supply and mouse as well as a monitor or TV via HDMI, then switch on and, thanks to the pre-installed software, get started immediately - surfing the Internet, programming or starting a new project.
Technical data
• 1.8 GHz quad-core ARM Cortex-A72 CPU
• 4 GB LPDDR4-3200 DRAM
• VideoCore VI graphics (OpenGL ES 3.1, volcano)
• 4kp60 HEVC decoding
• Gigabit LAN (10/100/1000)
• 2x USB 3.0 / 1x USB 2.0
• 2x microHDMI (1x 4kp60 or 2x 4kp30)
• Power supply via USB-C (5 V @ 3 A)
• Raspberry Bi-compatible 40-pin GPIO connector
Scope of delivery
• Raspberry Pi 400 (keyboard (red/white) incl. Raspberry Pi 4 B with 4 GB)
• Raspberry Pi USB-C power supply (5 V / 3 A)
• Raspberry Pi mouse (red/white)
• 1 m HDMI cable
• 16GB micro SD card (operating system included)
• Raspberry Pi companion book
Note
The keyboard of the Pi 400 can be exchanged for another keyboard layout if required. You can see how this works in our magazine at https://www.reichelt.de/magazin/
The stand-alone version, as well as the kit, is available in different languages or with different keyboard layouts (DE / UK / FR / IT / ES / US)
DDR4 ECC Unbuffered SODIMM
Applied Models:
- 22 series: DS3622xs+, DS2422+
Always select authentic Synology memory modules for optimum compatibility and reliability.
Installation of non-Synology memory modules can lead to system instability or boot failures.
Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
- PCIe 4.0 NVMe Gen 4x4 performance
- Hardware-based power loss protection
The Kingston DC2000B is a powerful PCIe 4.0 NVMe M.2 SSD with the latest Gen 4x4 PCIe interface with 112-layer 3D TLC NAND. Ideally suited for use in high-volume rack-mount servers as an internal boot drive(s) to preserve valuable front-loading drive bays, as well as for use in purpose-built systems where a high-performance M.2 SSD is needed that includes hardware-based on-board power loss protection (PLP). New for the DC2000B is an integrated aluminium heatsink that offers broader thermal compatibility for a wide range of systems.
The DC2000B delivers low latency and excellent IO consistency to handle various workloads from boot drive applications to high-speed application caching. The DC2000B is designed for a
write time of 0.4 DWPD
PCIe 4.0 NVMe performance
Uses PCIe Gen 4x4 lanes for high speeds.
Built-in power loss protection (PLP)
Reduces the possibility of data loss and/or damage in the event of unforeseen power outages.
As USB ports are now a fixture on virtually every computer and can even be found in cars, DVD and multimedia players, televisions, photo frames etc., USB drives have become an indispensable accessory.
The Verbatim PinStripe USB drive features a convenient slide mechanism that is consistently reliable at protecting the USB port without the need for a protective cap, which is easy to lose.
• Password protection software test version can be downloaded from Verbatim.
• Free hotline support
• Weight: 8.6 g
Whether it's performance power for your games or fast processing of large graphics: With the SSD 980, you can help your computer achieve powerful performance. The 980 is a smart and cost-effective choice for high SSD speed - enabled by a PCIe® 3.0 interface and NVMe™ technology.
Highlights:
- High-performance and cost-effective PCIe® 3.0 NVMe™ SSD for gaming and everyday applications
- advanced V-NAND storage technology in compact M.2 form factor (2280)
- high data transfer speeds of up to 3,500 MB/s - more than 6.2 times faster than SATA SSDs
- Intelligent TurboWrite 2.0 with up to 160 GB dynamic buffer memory for long-lasting high performance
- Supports Full Power Mode for highest possible performance with low latency
- Supports Direct Storage with Windows 11
Upgrade mode: faster
Elevate your system's performance with the high-speed Crucial T500 Gen4 SSD
Powering more possibilities
- Design and iterate faster
- Get up to 42% faster performance in content creation apps
- Free up system resources for lag-free creation
In-game gains
- Load games 16% faster
- Store more games with up to 4 TB of storage
- Render more with Microsoft® DirectStorage
Performance to power ratio
- 40% higher performance to power ratio
- Supports computer working speed with less power
Quick and easy to install
- Free Acronis® True Image cloning software for installing
- Crucial online tutorials and how-to guides available
- Can be set up as a boot drive
Technical data
- CPU: Rockchip RK3566 quad-core processor Cortex-A55 ARMv8-A @1.8 GHz
- GPU: Mali-G52 MP2-GPU @800 MHz
- NPU: 0.8 TOPS@INT8, integrated AI accelerator RKNN NPU
- RAM: 4 GB LPDDR4 with 32-bit bus width, data rate: 2112 MT/s, up to 1,055 MHz
- Memory: 64 GB eMMC embedded (soldered onto the board)
- Micro SD slot (UHS-I SDR104, boot priority is always higher than eMMC)
- NVME M.2 SSD (PCIe 2.1 x 1 lane)
- LAN: 10/100/1000 Mbit/s Realtek RTL8211F RJ45
- Video: HDMI 2.0 (up to 4K@60Hz with HDR, EDID) / MIPI DSI interface
- Connections: USB 2.0 host port / USB 3.0 host port / USB 2.0 micro OTG port / UART
- GPIO connections: 40-pin GPIO and 14-pin GPIO
- Other: RTC backup battery connector
- Power supply: 5 V USB-C @3 A
- Power consumption: 1.1 W / 3.52 W (idle / full load)
- Dimensions (LxWxH): 90 x 65 x 16 mm
Note Delivery includes passive heat sink, housing and power supply unit
external links
http://forum.odroid.com (Forum)
http://hardkernel.com (manufacturer)
http://magazine.odroid.com (Magazine)
https://wiki.odroid.com/odroid-m1s/odroid-m1s (Software)
48Gbps all in one switcher / splitter
This 2x4 HDMI splitter / switcher standalone solution provides comprehensive 48Gbps HDMI signal processing for any professional AV installation. Suitable for projects ranging from legacy 1080p to modern 4K 120Hz or full 8K installations.
- Up to 48Gbps: Full support for 8K 60Hz 4:2:0, 8K 30Hz 4:4:4, 5K 60Hz 4:4:4 and 4K 120Hz 4:4:4 with HDCP 2.3 compatibility.
- 12-bit color depth: Immerse yourself in stunning images with HDR10+, Dolby Vision, RGB, YCbCr 4:4:4 / 4:2:2, and YUV 4:2:0 support.
- Dual Switchable Inputs: Easily switch between two inputs with automatic switching, CEC button and RS232 control for seamless operation.
- Audio de-embedding: Enjoy digital SPDIF and analog 5-pin Phoenix audio de-embedding for a comprehensive audio experience.
- Advanced features: Benefit from comprehensive EDID options, HDCP 1.4 / 2.3 handshake management, CEC On/Off switch and downscaling functions from 8K to 4K and 8K/4K to 1080p.
Technical data
- CPU: Rockchip RK3566 quad-core processor Cortex-A55 ARMv8-A @1.8 GHz
- GPU: Mali-G52 MP2-GPU @800 MHz
- NPU: 0.8 TOPS@INT8, integrated AI accelerator RKNN NPU
- RAM: 8 GB LPDDR4 with 32-bit bus width, data rate: 2112 MT/s, up to 1,055 MHz
- Memory: 64 GB eMMC embedded (soldered onto the board)
- Micro SD slot (UHS-I SDR104, boot priority is always higher than eMMC)
- NVME M.2 SSD (PCIe 2.1 x 1 lane)
- LAN: 10/100/1000 Mbit/s Realtek RTL8211F RJ45
- Video: HDMI 2.0 (up to 4K@60Hz with HDR, EDID) / MIPI DSI interface
- Connections: USB 2.0 host port / USB 3.0 host port / USB 2.0 micro OTG port / UART
- GPIO connections: 40-pin GPIO and 14-pin GPIO
- Other: RTC backup battery connector
- Power supply: 5 V USB-C @3 A
- Power consumption: 1.1 W / 3.52 W (idle / full load)
- Dimensions (LxWxH): 90 x 65 x 16 mm
Note Delivery includes passive heat sink
external links
http://forum.odroid.com (Forum)
http://hardkernel.com (manufacturer)
http://magazine.odroid.com (Magazine)
https://wiki.odroid.com/odroid-m1s/odroid-m1s (Software)
- PCIe 4.0 NVMe Gen 4x4 performance
- Hardware-based power loss protection
The Kingston DC2000B is a powerful PCIe 4.0 NVMe M.2 SSD with the latest Gen 4x4 PCIe interface with 112-layer 3D TLC NAND. Ideally suited for use in high-volume rack-mount servers as an internal boot drive(s) to preserve valuable front-loading drive bays, as well as for use in purpose-built systems where a high-performance M.2 SSD is needed that includes hardware-based on-board power loss protection (PLP). New for the DC2000B is an integrated aluminium heatsink that offers broader thermal compatibility for a wide range of systems.
The DC2000B delivers low latency and excellent IO consistency to handle various workloads from boot drive applications to high-speed application caching. The DC2000B is designed for a
write time of 0.4 DWPD
PCIe 4.0 NVMe performance
Uses PCIe Gen 4x4 lanes for high speeds.
Built-in power loss protection (PLP)
Reduces the possibility of data loss and/or damage in the event of unforeseen power outages.
- PCIe 4.0 NVMe Gen 4x4 performance
- Hardware-based power loss protection
The Kingston DC2000B is a powerful PCIe 4.0 NVMe M.2 SSD with the latest Gen 4x4 PCIe interface with 112-layer 3D TLC NAND. Ideally suited for use in high-volume rack-mount servers as an internal boot drive(s) to preserve valuable front-loading drive bays, as well as for use in purpose-built systems where a high-performance M.2 SSD is needed that includes hardware-based on-board power loss protection (PLP). New for the DC2000B is an integrated aluminium heatsink that offers broader thermal compatibility for a wide range of systems.
The DC2000B delivers low latency and excellent IO consistency to handle various workloads from boot drive applications to high-speed application caching. The DC2000B is designed for a
write time of 0.4 DWPD
PCIe 4.0 NVMe performance
Uses PCIe Gen 4x4 lanes for high speeds.
Built-in power loss protection (PLP)
Reduces the possibility of data loss and/or damage in the event of unforeseen power outages.
The sets consisting of mainboard, RAM, CPU and CPU cooler are perfectly matched and already pre-assembled (note: tower cooler still needs to be put on).
- Mainboard: Gigabyte GA-A520M-S2H
- Chipset: AMD A520
- Slots:
- 1* PCI Express 3.0 x16 slot
- 2* PCI Express 3.0 x1 slot
- 4* SATA3 6.0 Gb/s ports, 1* M.2 port
- Memory: 8 GB DDR4 PC3600
- Graphics card: without
- Hard disk: without
- Processor: AMD Ryzen5 5500 Socket AM4
- Processor clock: 6* 3.60 GHz (6* 4.20 GHz Turbo)
- Network card: Realtek® GbE LAN chip (1000 Mbit/100 Mbit)
- Sound: 7.1 Channel HD Audio
- Rear connectors: 1* DVI, 1* VGA, 1* PS/2 Keyboard/Mouse Port,1* HDMI, 1* RJ45, 1* Audio, 2* USB 2.0, 4* USB 3.0
- Average power consumption: 115W
Scope of delivery:
Mainboard, CPU incl. cooler, memory, installation manual, CD driver, I/O Shield, 2* SATA cable, 3* screws for M.2 sockets.
Form Factor:
Micro ATX, 24.4cm x 20.5cm
Note: CPU without graphics core, please buy additional graphics card
One functions as an HD media player with external hard disk for the home cinema or as an Internet radio with display, the next as a webcam server for camera surveillance with live streaming to the cell phone, then another for home automation such as heating or lighting control and yet another as a simple WLAN printer server or as a mini-computer for general Internet surfing, to name just a few application scenarios.
As you can see, the little ''jack-of-all-trades'' can not only do a lot, but is also extremely inexpensive and that's what makes it so attractive. All you need to bring along is a penchant for programming and not even that, because you can also simply program it according to instructions from forums or books, or simply install a ready-made image on the Raspberry Pi - go for it!
What's new about the Raspberry Pi 4 B?
Old Raspberry Pi 3 B+
• 1.4 GHz ARM Cortex-A53 quad-core CPU
• 1 GB LPDDR2 SDRAM
• Gigabit LAN RJ45 (via USB 2.0 with up to 300 Mbit)
• Bluetooth 4.2
• 4x USB 2.0
• HDMI (1080p @H.264)
• microUSB @ 5V/2.5A
New Raspberry Pi 4 B
• 1.8 GHz ARM Cortex-A72 quad-core CPU
• 2 GB, 4 GB or 8 GB LPDDR4 SDRAM
• Gigabit LAN RJ45 (with up to 1000 Mbit)
• Bluetooth 5.0
• 2x USB 2.0 / 2x USB 3.0
• 2x microHDMI (1x 4k @60fps or 2x 4k @30fps)
• USB Type-C @ 5V/3A
There are the following 3 different variants
• Raspberry Pi 4 B 2GB with 2 GB RAM (ArtNo.: RASP PI 4 B 2GB)
• Raspberry Pi 4 B 4GB with 4 GB RAM (ArtNo.: RASP PI 4 B 4GB)
• Raspberry Pi 4 B 8GB with 8 GB memory (ArtNo.: RASP PI 4 B 8GB)
Due to the other connections, such as 2x microHDMI instead of 1x HDMI and USB Type-C instead of microUSB, but also due to the exchange of LAN port and USB port, new housings are required. Otherwise, the existing accessories are fully compatible with the new Raspberry Pi.
Notes:
• for full functionality you need the latest software, available at www.raspberrypi.org or in our online store
• we recommend operating the Raspberry Pi with a heat sink to avoid possible overheating. We also recommend operating the Raspberry Pi in a closed housing only with sufficient cooling or ventilation.
#Please connect the screen to HDMI 0 (next to the power supply) and then put the Raspberry Pi into operation. Only use HDMI 1 with 2 monitors!
- POWERFUL: Add 8 SATA III 6 Gbit/s ports to your desktop computer or server using a PCIe x4 Gen 2 slot to connect SATA drives (HDD/SSD). The 8-port SATA PCIe card has 2x Mini SAS ports and includes a Mini SAS to 4x lockable SATA adapter cables
- FOUR TIMES THE CONTROL: This PCI Express SATA 6 card has a PCIe MUX and four SATA host controller with two ports. This design provides eight 6-Gbit/s SATA (Serial ATA) ports through a single x4 PCIe slot, providing up to 20 Gbit/s
- COMPATIBILITY: Supports PCIe Gen 2, SATA III and earlier generations at lower performance (SATA I/II, PCIe Gen 1), Windows (XP+), MacOS (10.6.8+), Linux (2.6.32+), improved motherboard compatibility without the need for a fork and integrated RAID
CL16 - black (CMK16GX4M2B3200C16)
Vengeance LPX memory is designed for high-performance overclocking. The heatspreader is made of pure aluminum for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential.
The DDR4 form factor is optimized for the latest Intel 100 Series motherboards and offers higher frequencies, greater bandwidth, and lower power consumption than DDR3 modules. Vengeance LPX DDR4 modules are compatibility-tested across 100 Series motherboards for reliably fast performance. There’s XMP 2.0 support for trouble-free automatic overclocking. And, they’re available in multiple colors to match your motherboard, your components, or just your style.
Specifications
- Memory: 8 GB (2 x 8 GB)
- Speed: 3200 MHz
- Tested Latency: CL 16 (16-18-18-36)
- Voltage: 1,35 V
- Format: Unbuffered DIMM
- Pin Out: 288 Pin
- Intel XMP 2.0
- Heatspreader: Anodized Aluminum
The fully compatible, pre-assembled kits consist of a motherboard, main memory, CPU and CPU cooler (note: cooling towers still need to be mounted).
- Motherboard: Gigabyte GA-H510M-H
- Chipset: Intel® H510 Express
- Slots:
- 1x PCI Express 4.0 x16 slot, running at x16 (PCIEX16)
- 1x PCI Express x1 slot (PCIEX1_1)
- 4 x SATA3 6.0 GB/s ports, 1 x M.2 port
- Memory: 8 GB DDR4 PC3200
- Onboard graphics: Integrated Intel® UHD Graphics 610
- Hard disk: none
- Processor: Intel® Pentium Gold G6405 socket 1200 (LGA)
- Processor clock: 2x 4.10 GHz
- Network interface card: Realtek® GbE LAN chip (10/100/1000 Mbit)
- Sound: 7.1 channel HD audio
- Rear connections:
- 1x PS/2 keyboard/mouse port, 1x HDMI, 1x VGA
- 2x USB 3.2 Gen 1 ports, 1x RJ45, 1x audio
- 4x USB 2.0/1.1 ports
- Average power consumption: 86 W
Included in delivery
Motherboard, CPU incl. cooler, memory, installation manual, CD drive, I/O shield, 2x SATA cables, 3x screws for M.2 sockets
Form factor:
Micro ATX form factor: 24.4 cm x 21.0 cm
Technical data
- CPU: Rockchip RK3566 quad-core processor Cortex-A55 ARMv8-A @1.8 GHz
- GPU: Mali-G52 MP2-GPU @800 MHz
- NPU: 0.8 TOPS@INT8, integrated AI accelerator RKNN NPU
- RAM: 4 GB LPDDR4 with 32-bit bus width, data rate: 2112 MT/s, up to 1,055 MHz
- Memory: 64 GB eMMC embedded (soldered onto the board)
- Micro SD slot (UHS-I SDR104, boot priority is always higher than eMMC)
- NVME M.2 SSD (PCIe 2.1 x 1 lane)
- LAN: 10/100/1000 Mbit/s Realtek RTL8211F RJ45
- Video: HDMI 2.0 (up to 4K@60Hz with HDR, EDID) / MIPI DSI interface
- Connections: USB 2.0 host port / USB 3.0 host port / USB 2.0 micro OTG port / UART
- GPIO connections: 40-pin GPIO and 14-pin GPIO
- Other: RTC backup battery connector
- Power supply: 5 V USB-C @3 A
- Power consumption: 1.1 W / 3.52 W (idle / full load)
- Dimensions (LxWxH): 90 x 65 x 16 mm
Note Delivery includes passive heat sink, housing and power supply unit
external links
http://forum.odroid.com (Forum)
http://hardkernel.com (manufacturer)
http://magazine.odroid.com (Magazine)
https://wiki.odroid.com/odroid-m1s/odroid-m1s (Software)
One functions as an HD media player with external hard disk for the home cinema or as an Internet radio with display, the next as a webcam server for camera surveillance with live streaming to the cell phone, then another for home automation such as heating or lighting control and yet another as a simple WLAN printer server or as a mini-computer for general Internet surfing, to name just a few application scenarios.
As you can see, the little ''jack-of-all-trades'' can not only do a lot, but is also extremely inexpensive and that's what makes it so attractive. All you need to bring along is a penchant for programming and not even that, because you can also simply program it according to instructions from forums or books, or simply install a ready-made image on the Raspberry Pi - go for it!
What are the differences between a Raspberry Pi 4 B and a Raspberry Pi 5 B?
Old Raspberry Pi 4 B
- 1.5 GHz ARM Cortex-A72 quad-core CPU
- VideoCore VI GPU
- 2x microHDMI (1x 4k @60fps or 2x 4k @30fps)
- 1 GB, 2 GB, 4 GB or 8 GB LPDDR4 SDRAM
- 2x USB 3.0
- 2x MIPI (1x DSI / 1x CSI)
- USB Type-C @ 5V/3A
New Raspberry Pi 5 B
- 2.4 GHz ARM Cortex-A76 quad-core CPU (2-3x faster than its predecessor)
- VideoCore VII GPU
- 2x microHDMI (2x 4k @60fps)
- 4 GB or 8 GB LPDDR4X-4267 SDRAM
- 2x USB 3.0 with up to 5 Gb/s
- 2x MIPI (2x DSI/CSI)
- USB Type-C @ 5V/5A
- additionally:
- PCIe 2.0 x1 interface (e.g. for SSD M.2 memory)
- Power button
- RTC battery connection
- extra UART connection
- Extra fan connection
Further features
- Wi-Fi 802.11ac (2.4 GHz / 5.0 GHz)
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- MicroSD card reader with high-speed SDR104 support
- 2× USB 3.0 / 2× USB 2.0
- LAN 10/100/1000 Mbit/s with PoE+ support (requires PoE+ HAT)
The following 5 variants are currently available
- Raspberry Pi 5 B 1GB with 1 GB RAM (ArtNo.: RASP PI 5 B 1GB)
- Raspberry Pi 5 B 2GB with 2 GB RAM (ArtNo.: RASP PI 5 B 2GB)
- Raspberry Pi 5 B 4GB with 4 GB RAM (ArtNo.: RASP PI 5 B 4GB)
- Raspberry Pi 5 B 8GB with 8 GB RAM (ArtNo.: RASP PI 5 B 8GB)
- Raspberry Pi 5 B16 GB with 16 GB RAM (ArtNo.: RASP PI 5 B 16GB)
ATTENTION
Due to the new arrangement of the LAN port and USB port as well as other changes to the connections, new housings are required.
CSX - high-performance storage solutions for PCs and notebooks
The German brand CSX is synonymous with high-quality desktop and notebook storage solutions and is sold throughout Europe through numerous PC and Apple outlets.
CompuStocx has been a reliable partner for system houses as well as manufacturers and integrators of PCs, notebooks, workstations and servers since 1996.
CSX memory delivers uncompromising compatibility and quality, and is 100% compliant with JEDEC standards, ensuring the long life and stable, energy efficient operation of your systems.
CSX - high-performance storage solutions for PCs and notebooks
The German brand CSX is synonymous with high-quality desktop and notebook storage solutions and is sold throughout Europe through numerous PC and Apple outlets.
CompuStocx has been a reliable partner for system houses as well as manufacturers and integrators of PCs, notebooks, workstations and servers since 1996.
CSX memory delivers uncompromising compatibility and quality, and is 100% compliant with JEDEC standards, ensuring the long life and stable, energy efficient operation of your systems.
Enhanced power improvements include an onboard Power Management IC (PMIC), which provides better control of local voltage regulation while delivering increased threshold protection, simultaneous monitoring, intelligent voltage and power management.
The Signature Line DDR5 series includes onboard thermal sensors to monitor and protect against thermal issues and better overall reporting. In addition, the latest on-die ECC (Error-Correcting Code) further enhances the accuracy of data-processing and your overall system's stability.
CSX - high-performance storage solutions for PCs and notebooks
The German brand CSX is synonymous with high-quality desktop and notebook storage solutions and is sold throughout Europe through numerous PC and Apple outlets.
CompuStocx has been a reliable partner for system houses as well as manufacturers and integrators of PCs, notebooks, workstations and servers since 1996.
CSX memory delivers uncompromising compatibility and quality, and is 100% compliant with JEDEC standards, ensuring the long life and stable, energy efficient operation of your systems.
CSX - high-performance storage solutions for PCs and notebooks
The German brand CSX is synonymous with high-quality desktop and notebook storage solutions and is sold throughout Europe through numerous PC and Apple outlets.
CompuStocx has been a reliable partner for system houses as well as manufacturers and integrators of PCs, notebooks, workstations and servers since 1996.
CSX memory delivers uncompromising compatibility and quality, and is 100% compliant with JEDEC standards, ensuring the long life and stable, energy efficient operation of your systems.
CSX - high-performance storage solutions for PCs and notebooks
The German brand CSX is synonymous with high-quality desktop and notebook storage solutions and is sold throughout Europe through numerous PC and Apple outlets.
CompuStocx has been a reliable partner for system houses as well as manufacturers and integrators of PCs, notebooks, workstations and servers since 1996.
CSX memory delivers uncompromising compatibility and quality, and is 100% compliant with JEDEC standards, ensuring the long life and stable, energy efficient operation of your systems.
- Powerful performance of up to 7400 MT/s
- Optimised for the latest DDR5 platforms
- High-quality IC: selected and tested for enhanced overclocking capabilities
- 100% hand-tested: fully tested and tuned profiles for maximum performance
- Unlocked PMIC: released power to enable full performance for XMP and beyond
Designed to perfection
The Viper Venom DDR5 is made from high-quality aluminium components and is 100% hand-tested at every step to ensure first-class quality and reliability.
Exceptional speed
With performance up to 7400 MT/s in select models, the Viper Venom DDR5 delivers a powerful combination of performance and efficiency with a state-of-the-art internal clock generator and memory timing circuitry.
Intel XMP 3.0 and AMD EXPO-enabled
The Viper Venom DDR5 supports the Intel XMP 3.0 and AMD EXPO overclocking profiles.
CSX - high-performance storage solutions for PCs and notebooks
The German brand CSX is synonymous with high-quality desktop and notebook storage solutions and is sold throughout Europe through numerous PC and Apple outlets.
CompuStocx has been a reliable partner for system houses as well as manufacturers and integrators of PCs, notebooks, workstations and servers since 1996.
CSX memory delivers uncompromising compatibility and quality, and is 100% compliant with JEDEC standards, ensuring the long life and stable, energy efficient operation of your systems.
CSX - high-performance storage solutions for PCs and notebooks
The German brand CSX is synonymous with high-quality desktop and notebook storage solutions and is sold throughout Europe through numerous PC and Apple outlets.
CompuStocx has been a reliable partner for system houses as well as manufacturers and integrators of PCs, notebooks, workstations and servers since 1996.
CSX memory delivers uncompromising compatibility and quality, and is 100% compliant with JEDEC standards, ensuring the long life and stable, energy efficient operation of your systems.
CSX - high-performance storage solutions for PCs and notebooks
The German brand CSX is synonymous with high-quality desktop and notebook storage solutions and is sold throughout Europe through numerous PC and Apple outlets.
CompuStocx has been a reliable partner for system houses as well as manufacturers and integrators of PCs, notebooks, workstations and servers since 1996.
CSX memory delivers uncompromising compatibility and quality, and is 100% compliant with JEDEC standards, ensuring the long life and stable, energy efficient operation of your systems.
The Raspberry Pi AI HAT+ 2 is an AI accelerator module for machine learning and artificial intelligence on the Raspberry Pi 5. Based on the original AI HAT+, this module extends the support of vision models with selected Large Language Models and Vision Language Models. The connection is made via PCI Express and enables powerful and efficient AI acceleration directly on the system.
The Raspberry Pi AI HAT+ 2 builds on the previous AI HAT+ (article no. RASP SHD AI 13 or RASP SHD AI 26), but goes much further. Thanks to Hailo 10H and 8 GB of its own LPDDR4X memory, larger and more complex AI models can be executed directly on the Raspberry Pi 5 for the first time, including selected LLMs and VLMs. Less dependency on system memory, lower latencies and significantly more AI flexibility at the edge.
- Hailo 10H AI Accelerator Dedicated Neural Network Accelerator for efficient execution of AI models.
- Support for LLMs and VLMs Accelerates not only vision models but also selected speech and multimodal models.
- Onboard memory Integrated 8 GB LPDDR4X memory for processing complex AI workloads.
- PCI Express connection Direct connection via PCI Express for high data rates and low latency.
- Optimized for Raspberry Pi 5 Exclusively compatible with Raspberry Pi 5 due to the PCIe interface.
Technical data:
- AI accelerator: Hailo 10H
- AI performance: 40 TOPS
- Memory: 8 GB LPDDR4X 4267 SDRAM
- Interface: PCI Express
- Compatibility: Raspberry Pi 5
- Supported model types: Vision models, selected LLMs and VLMs
- Supported models at launch: Llama 3.2 3B Instruct, QWEN 2.5 VL 3B, ASR Whisper Base
Application areas:
- AI image processing and computer vision
- Local execution of language models
- Vision language applications on embedded systems
- Edge AI and machine learning with Raspberry Pi
- Research, prototyping and AI development
The Raspberry Pi AI HAT+ 2 extends the Raspberry Pi 5 with powerful AI functions and enables the local execution of modern AI models without a cloud connection.
external links
https://www.raspberrypi.com/documentation/accessories/ai-hat-plus.html
Gen6 wireless on a budget - tiny, fast, and strong enough to harvest the power of RouterOS v7!
- RouterOS v7 Operating System
- 256 MB Size of RAM
- 128 MB Storage size (NAND)
- 574 Mbit/s Wireless 2.4 GHz Max data rate
- 4x RJ45 Gigabit Ethernet
- IP20
hAP ax lite is the perfect tiny solution when you’ve got to cut costs but can’t afford to sacrifice performance.
Our latest Gen6 AX wireless chip allows you to squeeze the traditional 2.4 GHz wireless spectrum like a lemon!
Depending on your overall setup, you can expect an increase in speed of up to 90%!
Very useful in scalable setups like hotels or expanding offices - the appealing price point, compact size, and a strong set of features allows adding more devices without a doubt!
And - speaking of hotels - why not pack a hAP ax lite for your vacation?
It takes up almost no space in your suitcase and allows you to break free from the restrictive guest networks.
hAP lite devices have always been about value.
With 256 MB of RAM , a modern ARM CPU running at 800 MHz, 4x Gigabit Ethernet ports , much higher dual-chain antenna gain (up to 4.3 dBi!), and a complete visual redesign, the new hAP ax lite is a real trailblazer of value and affordable networking.
Package Contents:
- hAP ax lite
- 5V 2.4A 12W USB power adapter
