ODROID H4 ULTRA - ODROID H4 Ultra Board - N305
382 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
To enable you to use a powerful platform at a relatively low cost, we have removed all SATA features, the second Ethernet port and the dual BIOS function to create a base H4 model that puts the emphasis on cost efficiency. It is therefore suitable for use in embedded systems such as digital signage, factory automation and robot control.
In contrast, the H4+ features four SATA ports, a second Ethernet port and dual BIOS, making it the perfect choice for users who need storage for high-performance NAS and/or use it for routing functions.
Finally, although it is more expensive, we also have developed the H4 Ultra model, which can benefit from the powerful performance with twice the number of CPU cores (from 4 to 8) and more GPU execution units. Thanks to the large number of cores and high clock frequency, the H4 Ultra model's computing power is twice as high as that of the H4 and H4+ models, as the results of multithreading benchmarking show.
EAN: 3272496318458
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
To enable you to use a powerful platform at a relatively low cost, we have removed all SATA features, the second Ethernet port and the dual BIOS function to create a base H4 model that puts the emphasis on cost efficiency. It is therefore suitable for use in embedded systems such as digital signage, factory automation and robot control.
In contrast, the H4+ features four SATA ports, a second Ethernet port and dual BIOS, making it the perfect choice for users who need storage for high-performance NAS and/or use it for routing functions.
Finally, although it is more expensive, we also have developed the H4 Ultra model, which can benefit from the powerful performance with twice the number of CPU cores (from 4 to 8) and more GPU execution units. Thanks to the large number of cores and high clock frequency, the H4 Ultra model's computing power is twice as high as that of the H4 and H4+ models, as the results of multithreading benchmarking show.
EAN: 3272496318458
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
ODROID H4+ - ODROID H4+ Board - N97
257.97 EUR
To enable you to use a powerful platform at a relatively low cost, we have removed all SATA features, the second Ethernet port and the dual BIOS function to create a base H4 model that puts the emphasis on cost efficiency. It is therefore suitable for use in embedded systems such as digital signage, factory automation and robot control.In contrast, the H4+ features four SATA ports, a second Ethernet port and dual BIOS, making it the perfect choice for users who need storage for high-performance NAS and/or use it for routing functions.
Finally, although it is more expensive, we also have developed the H4 Ultra model, which can benefit from the powerful performance with twice the number of CPU cores (from 4 to 8) and more GPU execution units. Thanks to the large number of cores and high clock frequency, the H4 Ultra model's computing power is twice as high as that of the H4 and H4+ models, as the results of multithreading benchmarking show.
ODROID H4 - ODROID H4 Board - N97
175.28 EUR
To enable you to use a powerful platform at a relatively low cost, we have removed all SATA features, the second Ethernet port and the dual BIOS function to create a base H4 model that puts the emphasis on cost efficiency. It is therefore suitable for use in embedded systems such as digital signage, factory automation and robot control.In contrast, the H4+ features four SATA ports, a second Ethernet port and dual BIOS, making it the perfect choice for users who need storage for high-performance NAS and/or use it for routing functions.
Finally, although it is more expensive, we also have developed the H4 Ultra model, which can benefit from the powerful performance with twice the number of CPU cores (from 4 to 8) and more GPU execution units. Thanks to the large number of cores and high clock frequency, the H4 Ultra model's computing power is twice as high as that of the H4 and H4+ models, as the results of multithreading benchmarking show.
Lancome Teint Idole Ultra Wear Foundation 305N 30 ml
41.12 EUR
Lancôme Teint Idôle Ultra Wear 24H Foundation with improved formula and full coverage provides up to 24 hours of hold and leaves a natural matte finish. It adapts individually to every skin tone and skin need.
Lancome Teint Idole Ultra Wear Skin-Glow Concealer 305N 13 ml
35.24 EUR
A unique formula that gives your complexion a healthy, radiant glow for up to 24 hours. This medium buildable coverage serum concealer highlights your face areas by capturing natural light. With an ultra-nourishing serum formula, it adds radiance to the skin and contains moisturizing hyaluronic acid as well as ceramides, peptides and yuzu extracts to smooth, strengthen and plump the skin. Teint Idôle Ultra Wear Care & Glow Serum Concealer provides an even, radiant complexion that lasts all day without settling into fine lines. Apply Teint Idole Ultra Wear Care & Glow Foundation in addition to enhance the glow effect.Application: Use the curved and handy applicator to cover imperfections and dark circles with just one layer. Use the pointed side to precisely apply the serum concealer to the desired areas of the face.
Lancôme Teint Idole Ultra Wear 24h Long-Lasting Foundation SPF 35 shade 305 N 30 ml
52.15 EUR
Lancôme Teint Idole Ultra Wear 24h, 30 ml, Foundations for Women, Flawless skin is fundamental to every look, whether you’re going for bold evening makeup or very natural daytime makeup. And that’s where the Lancôme Teint Idole Ultra Wear 24h foundation can help. It blends in seamlessly with your skin and takes care of a perfectly even skin tone. Thanks to its coverage, it masks minor skin imperfections, such as hyperpigmentation, redness or acne marks, instantly. You’ll achieve an even skin tone in just a moment, and that will serve as an excellent base for any other makeup. Characteristics: long-lasting effect excellent coverage hydrates protects against sunlight How to use: Apply foundation to the face using gentle strokes. Blend in thoroughly and evenly with the fingers or a sponge or brush.
Lancôme Teint Idole Ultra Wear Care & Glow Radiance Moisturising Makeup SPF 25 shade 305N 30 ml
54.45 EUR
Lancôme Teint Idole Ultra Wear Care & Glow, 30 ml, Foundations for Women, Flawless skin is fundamental to every look, whether you’re going for bold evening makeup or very natural daytime makeup. And that’s where the Lancôme Teint Idole Ultra Wear Care & Glow foundation can help. It blends in seamlessly with your skin and takes care of a perfectly even skin tone. Thanks to its coverage, it masks minor skin imperfections, such as hyperpigmentation, redness or acne marks, instantly. You’ll achieve an even skin tone in just a moment, and that will serve as an excellent base for any other makeup. Characteristics: long-lasting effect brightens the complexion hydrates How to use: Apply foundation to the face using gentle strokes. Blend in thoroughly and evenly with the fingers or a sponge or brush.
ODROID H4 ITX - ODROID H4 Mini-ITX Kit
38.84 EUR
Dieses Kit passt den Formfaktor so an, dass das H4-Board in ein Mini-ITX-Gehäuse für einen Desktop-PC oder ein DIY-NAS eingebaut werden kann.Der Bausatz enthält:
- die Grundplatte.
- die IO-Shield-ähnliche Rückwand plus Stützplatte.
- erforderliche Abstandshalter und Schrauben.
- das 24-polige ATX-Netzteil-Starterkabel mit Jumper-Brücke und dem roten Schalter (wie auf dem Foto zu sehen).
- das MOLEX-zu-DC-Steckerkabel. Damit können Sie jedes H4-Board mit einem beliebigen ATX-Netzteil (einschließlich SFF-Netzteil) mit Strom versorgen.
Wichtiger Hinweis
Das ATX-Netzteil liefert 12V an das H4-Board. Wenn Sie SATA-Festplatten, SSDs oder andere Geräte verwenden, versorgen Sie diese über das ATX-Netzteil, nicht über das H4-Board. Der Grund: ein H4-Board kann Festplatten nur dann korrekt mit Strom versorgen, wenn es selbst von einem 19V/133W-Netzteil mit Strom versorgt wird, insbesondere beim Kaltstart. In der Zwischenzeit hat selbst ein ATX-Netzteil mit 250+Watt keine Probleme, ein H4-Board und alle angeschlossenen Peripheriegeräte zu versorgen. Wenn Sie eine diskrete Grafikkarte verwenden (mit einem optionalen M.2-zu-PCIe-Adapter), sollten Sie ein leistungsstärkeres ATX-Netzteil verwenden, um den Stromverbrauch der Grafikkarte zu decken.
Das H4 Mini-ITX-Kit ist nur für die H4-Boards konzipiert und nicht mit den H2/H3-Boards kompatibel.
Teileliste
- rückseitige Halterungsabdeckung
- 4x 40mm (M/F) PCB-Halterungen (Stahl)
- 2x 32mm (M/F) PCB-Halterungen (Stahl)
- 4x 6mm Flachrundkopfschrauben
- 24-polige ATX-Netzteilbuchse Ein/Aus-Schalter Jumper Brückenkabel
- IDE-zu-DC-Steckerkabel
ODROID H4 CASE1 - ODROID H4 Gehäuse 1
29.54 EUR
Minimale Größe: Keine Platz für Netzwerkkarte, kein Platz für SATA-Speicher.Das Loch für den zweiten Ethernet-Anschluss des H4+ und H4 Ultra ist benutzerkonfigurierbar: Verwenden Sie einen Cutter, um es von der Rückwand zu trennen.
Dieses Gehäuse ist nicht mit der H2/H3-Serie kompatibel.
Ein dünner 92x92x15 mm großer Lüfter kann als Option intern installiert werden.
Der Lüfter ist in diesem Produkt nicht enthalten.
Wir empfehlen Ihnen, einen elektrischen Schraubendreher zu verwenden, wenn Sie den Lüfter mit diesem Gehäuse montieren.
Teileliste
- Oberseite
- Rückseite
- Vorderseite
- Unterseite
- Linke/Rechte Seite
- 4x 10mm (M/F) PCB-Halterungen
- 4x 50mm (F/F) Leiterplattenstützen
- 8x 6mm Flachrundkopfbolzen
- 4x Gummifüße (rund / klar)
ODROID H4 CASE2 - ODROID H4 Gehäuse 2, für Netzwerkkarte
33.67 EUR
Platz für eine Netzwerkkarte. Kein Platz für SATA-Speicher.Das Loch für den zweiten Ethernet-Anschluss des H4+ und H4 Ultra ist benutzerkonfigurierbar: Verwenden Sie einen Cutter, um es von der Rückwand zu trennen.
Dieses Gehäuse ist nicht mit der H2/H3-Serie kompatibel.
Ein dünner 92x92x15 mm großer Lüfter kann als Option intern installiert werden.
Der Lüfter ist in diesem Produkt nicht enthalten.
Wir empfehlen Ihnen, einen elektrischen Schraubendreher zu verwenden, wenn Sie den Lüfter mit diesem Gehäuse montieren.
Teileliste
- Oberseite
- Rückseite
- Vorderseite
- Unterseite
- Linke/Rechte Seite
- 2x 20mm (M/F) PCB-Halterungen
- 2x 16-9mm (M/F) PCB-Halterungen (Stahl)
- 4x 50mm (F/F) PCB-Halterungen
- 8x 6mm Flachrundkopfbolzen
- 4x Gummifüße (rund / klar)
ODROID H4 CASE3 - ODROID H4 Gehäuse 3, für 4x 2,5 SATA + Netzwerkkarte
41.94 EUR
Platz für eine Netzwerkkarte und für 4 x 2,5'' SATA-Laufwerke (max. 15mm hoch).Das Loch für den zweiten Ethernet-Anschluss des H4+ und H4 Ultra ist benutzerkonfigurierbar: Verwenden Sie einen Cutter, um es von der Rückwand zu trennen.
Dieses Gehäuse ist nicht mit der H2/H3-Serie kompatibel.
Ein dünner 92x92x15 mm großer Lüfter kann als Option intern installiert werden.
Der Lüfter ist in diesem Produkt nicht enthalten.
Wir empfehlen Ihnen, einen elektrischen Schraubendreher zu verwenden, wenn Sie den Lüfter mit diesem Gehäuse montieren.
Für dieses Produkt empfehlen wir die Verwendung eines SATA-Daten- und Stromkabels (200 mm).
Teileliste
- Oberseite
- Rückseite
- Vorderseite
- Unterseite
- Linke/Rechte Seite
- 2x 2,5'' SATA HDD/SSD-Halterung
- 4x 20mm (M/F) PCB-Halterungen
- 2x 16-9mm (M/F) PCB-Halterungen (Stahl)
- 4x 50mm (F/F) PCB-Halterungen
- 4x 50mm (M/F) PCB-Halterungen
- 24x 6mm Flachrundkopfbolzen
- 4x Gummifüße (rund / klar)
ODROID H4 NET - ODROID network card for H4, H3 and H2
92.59 EUR
Net Card 2 for the H seriesThe new Net Card 2 has the same physical form factor and interface method as the original Net Card, but the NIC chipset has changed from Realtek's RTL8125B to Intel's I226-V. There is no significant difference in network performance or driver features, but it shows better compatibility with hypervisor-based virtual machines such as ESXi.
The ODROID H2/H3/H4 Net Card 2 offers four additional 2.5 GbE Ethernet ports at an incredibly low price. It is compatible with H2, H2 rev. B, H2+, H3, H3+, H4, H4+ and H4 Ultra. When using an H2+, H3, H3+, H4+ and H4 Ultra, you get a total of 6 x 2.5 GbE Ethernet ports. The H4 has a total of 5 x 2.5 GbE Ethernet ports and H2 and H2 rev. B, you get 2 x 1 GbE and 4 x 2.5 GbE Ethernet ports.
Net Card2 develops new possibilities and applications.
- Set up a DIY router or gateway for up to five clients at 2.5 GbE speed at each port.
- Set up a DIY server, e.g. NAS for up to six clients with 2.5 GbE speed at each port.
ODROID H4 CASE4 - ODROID H4 Gehäuse 4, für 4x 3,5 SATA + Netzwerkkarte
56.41 EUR
Platz für Netzwerkkarte und 4 x 3,5'' SATA-Laufwerke.Das Loch für die Netzwerkkarte ist benutzerkonfigurierbar: Verwenden Sie einen Cutter, um es von der Rückwand zu trennen.
Dieses Gehäuse ist nicht mit der H2/H3-Serie kompatibel.
Die Netzwerkkarte ist in diesem Produkt nicht enthalten.
Wir empfehlen die Verwendung von zwei SATA-Daten- und Stromkabeln (200 mm) und zwei SATA-Daten- und Stromkabeln (250 mm) für den Anschluss von vier Festplatten.
Teileliste
- Oberseite
- Rückseite
- Vorderseite
- Unterseite
- Linke/Rechte Seite
- seitliches Verschlussstück
- 2x 10mm (M/F) PCB-Halterungen
- 2x 40mm (F/F) PCB-Halterungen
- 2x 40mm (M/F) PCB-Halterungen
- 6x 6mm Flachrundkopfbolzen
- 4x 10mm Lüfter-Schrauben
- 16x 6mm #6-32 Rundkopfschrauben
- 92x92x25mm DC-Lüfter
ODROID H3 CASE4 - Odroid H3 enclosure 4, for 2x 2.5''/1x3.5'' SATA
49.18 EUR
Space for 1 x 3.5'' SATA drive or 2 x 2.5'' SATA drives. There is no space for a network interface card. Package contents (check the attached images for categorisation):
A. Top plate
B. Back cover
C. Rear panel
D. Front control panel
E. Rear back panel
F. Lower plate
G. Front space filler
H. 2.5''/3.5'' internal drive bracket
I. Left/right plate
J. 92 mm stainless steel fan grille for front/rear top
K. 6 x 40 mm (F/F) PCB brackets
L. 4 x 15 mm (M/F) PCB brackets
M. 3 x 40 mm (M/F) PCB brackets
N. 4 x rubber feet (round/clear)
O. 4 x 6 mm #6-32 round head screws
P. 16 x 6 mm truss head screws
Q. 8 x M5 nuts
R. 8 x M5 truss head bolts
ODROID H3 32GB - Odroid 32 GB eMMC modules for H4/H3/H2
61.58 EUR
The state-of-the-art and competitive eMMC delivers incredible performance at higher processing speeds for today's single-board computers. With maximum sequential read/write speeds of 250 MB/s and 180 MB/s (based on 64 GB), this tiny eMMC memory module can handle heavy workloads without a problem.The eMMC module with the round orange sticker does not have an operating system pre-installed.
After attaching the eMMC module to the H2/H3, connect the USB stick with the operating system installation image to the H2/H3 and install the operating system on the eMMC.
- eMMC version 5.0 or higher interface.
- JEDEC/MMCA Version: HS400 interface with 8bit DDR mode.
- PCB revision: 0.4
ODROID H3 16GB - Odroid 16 GB eMMC modules for H4/H3/H2
39.87 EUR
The state-of-the-art and competitive eMMC delivers incredible performance at higher processing speeds for today's single-board computers. With maximum sequential read/write speeds of 250 MB/s and 180 MB/s (based on 64 GB), this tiny eMMC memory module can handle heavy workloads without a problem.The eMMC module with the round orange sticker does not have an operating system pre-installed.
After attaching the eMMC module to the H2/H3, connect the USB stick with the operating system installation image to the H2/H3 and install the operating system on the eMMC.
- eMMC version 5.0 or higher interface.
- JEDEC/MMCA Version: HS400 interface with 8bit DDR mode.
- PCB revision: 0.4
ODROID H3 CASE2 - Odroid H3 enclosure 2
30.57 EUR
There is no space for a network interface card. No space for SATA storage.Package contents (check the attached images for categorisation):
A. Top plate
B. Rear panel
C. Front side
D. Lower plate
E. Left/right control panel
F. 1 x 92 mm stainless steel fan grille
G. 4 x 40 mm (F/F) PCB brackets
H. 4 x 15 mm (M/F) PCB brackets
I. 4 x M5 nuts
J. 4 x rubber feet (round/clear)
K. 8 x 6 mm M3 truss head bolts
L. 4 x M5 truss head screws
ODROID H3 PSU1 - Odroid power supply unit 19 V / 7 A, H4/H3
61.58 EUR
The 3-pin AC power cable is not included in the scope of delivery. You will need a general PC power supply AC power cable.This 19V/7A power supply is compatible with SmartPower3, ODROID-H3, ODROID-H3+, ODROID-H4, ODROID-H4+ and ODROID-H4 Ultra.
Up to 133 W power. Recommended when using two 3.5'' HDDs
ODROID H3 NET - Odroid network interface card for H2(+), H3(+)
82.25 EUR
The ODROID H2/H3 network interface card offers 4 additional 2.5 GbE Ethernet ports at an incredibly low price. It is compatible with H2, H2 rev. B, H2+, H3, H3+. When using an H2+, you get a total of 6 x 2.5 GbE Ethernet ports. With the H2 and H2 rev. B, you get 2 x 1 GbE and 4 x 2.5 GbE Ethernet ports.The ODROID H2/H2+ with the ODROID H2 network interface card offers new possibilities and applications.
Some examples:
- Set up a DIY router or gateway for up to 5 (H2+) clients at 2.5 GbE speed at each port.
- Set up a DIY server, e.g. an NAS, for up to 6 (H2+) clients with 2.5 GbE speed at each port.
- Offers 2.5 GbE Ethernet connectivity for H2 and H2 rev. B-boards and allows them to communicate with H2+ boards at full speed (usually 2.35 Gbits/sec).
Please note! You must flash the GLK-ESF BIOS in order to use the H3/H2 NIC correctly.
ODROID H3 64GB - Odroid 64 GB eMMC modules for H4/H3/H2
84.32 EUR
The state-of-the-art and competitive eMMC delivers incredible performance at higher processing speeds for today's single-board computers. With maximum sequential read/write speeds of 250 MB/s and 180 MB/s (based on 64 GB), this tiny eMMC memory module can handle heavy workloads without a problem.The eMMC module with the round orange sticker does not have an operating system pre-installed.
After attaching the eMMC module to the H2/H3, connect the USB stick with the operating system installation image to the H2/H3 and install the operating system on the eMMC.
- eMMC version 5.0 or higher interface.
- JEDEC/MMCA Version: HS400 interface with 8bit DDR mode.
- PCB revision: 0.4
ODROID H3 PSU2 - Odroid power supply unit 15 V / 4 A, H4/H3
30.57 EUR
AC 100~240 volt inputDC 15 volt/4 A output
Switchable mains adapter
EU-compatible
Connector specification: internal (positive) diameter 2.1 mm and external (negative) diameter 5.5 mm
Cable length: 100 cm
Up to 60 W power. Recommended when using no or only one 3.5'' hard disk.
The design of the power supply unit is subject to change without notice.
ODROID H3 8GB - Odroid 8 GB eMMC module for H3/H2
30.61 EUR
The state-of-the-art and competitive eMMC delivers incredible performance at higher processing speeds for today's single-board computers. With maximum sequential read/write speeds of 250 MB/s and 180 MB/s (based on 64 GB), this tiny eMMC memory module can handle heavy workloads without a problem.The eMMC module with the round orange sticker does not have an operating system pre-installed.
After attaching the eMMC module to the H2/H3, connect the USB stick with the operating system installation image to the H2/H3 and install the operating system on the eMMC.
- eMMC version 5.0 or higher interface.
- JEDEC/MMCA Version: HS400 interface with 8bit DDR mode.
- PCB revision: 0.4
ODROID SATA - Odroid SATA data and power cable
16.1 EUR
SATA cables are perfect for system configurations in confined environments with ODROID-H3 and H2 enclosures type 1, type 3, type 4, type 5 and type 7 for connecting SATA hard disks/SSD storage. These flexible 200 mm cables are easy to manage and use thanks to the use of compact, stackable connectors.Package contains:
- 1 x 200mm SATA data cable
- 1 x 200mm SATA power cable
SATA data cable
- SATA 3.0 transfer rate up to 6 Gb/s
- SATA 7-pin to 7-pin data connector with safety lock
- Compatible with SATA I and II
SATA power cable
- Mini 4-pin (2.54mm grid) to SATA 15-pin power connections
- AWG 18 cable for sufficient power supply of a SATA SSD/HDD memory
Compatible with ODROID-H2, ODORID-H2+, ODROID-H3, ODROID-H3+
ODROID H3+ - Odroid H3+ Mini-PC - N6005
304.48 EUR
ODROID-H3+ has the same form factor and similar energy efficiency to its predecessor, the ODROID-H2+. However, the H3+ is more powerful and offers better performance.It is a brand-new, x86 64-bit single-board computer with large memory capacity, advanced IO ports and high compatibility.
- The Intel® Quad-Core processor Jasper Lake N6005 has a basic clock speed of 2 GHz and a boost clock of 3.3 GHz with 1.5 MB L2 and 4 MB L3 cache in a 10 nm process.
- Up to 64 GB dual channel DDR4 PC4-23400 memory (2933 MT/s)
- Two SO-DIMM slots, up to 32 GB per slot
- PCIe 3.0 x 4 lanes for M.2 NVMe storage
- 2x 2.5 Gbit Ethernet ports
- 2x SATA 3.0 ports
- SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
- Intel UHD Graphics 32 EUs Turbo 900 MHz
- HDMI 2.0 and DP 1.2 multiple video outputs
- A configurable Unlimited Performance mode that allows the CPU to run in continuous Turbo Boost mode.
- RTC/BIOS backup battery is included
ODROID H3 - Odroid H3 Mini PC - N5105
247.63 EUR
ODROID-H3 has the same form factor and similar energy efficiency to its predecessor, the ODROID-H2+. However, the H3 is more powerful and offers better performance.It is a brand-new, x86 64-bit single-board computer with large memory capacity, advanced IO ports and high compatibility.
- The Intel® Quad-Core processor Jasper Lake N5105 has a basic clock speed of 2 GHz and a boost clock of 2.9 GHz with 1.5 MB L2 and 4 MB-L3 cache in a 10 nm process.
- Up to 64 GB dual channel DDR4 PC4-23400 memory (2933 MT/s)
- Two SO-DIMM slots, up to 32 GB per slot
- PCIe 3.0 x 4 lanes for M.2 NVMe storage
- 2x 2.5 Gbit Ethernet ports
- 2x SATA 3.0 ports
- SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
- Intel UHD Graphics 24 EUs Turbo 800 Mhz (H3+:900 MHz)
- HDMI 2.0 and DP 1.2 multiple video outputs
- A configurable Unlimited-Performance mode that allows the CPU to run in continuous Turbo Boost mode.
- RTC/BIOS backup battery is included
PATRIOT MEMORY VP4300L4TBM28H - Viper Gaming VP4300 Lite SSD 4 TB, M.2 2280
245.77 EUR
- Read/write speeds up to 7400 MB/s, 6400 MB/s
- Latest NVMe 2.0 support
- Ultra-thin custom heat spreader
- PS5-compatible - PS5 seq. read up to 6100 MB/s
- Huge storage capacities of up to 4 TB
Game-changing speeds, unrivalled performance, unrivalled speed
The VP4300 Lite offers lightning-fast speed and an unrivalled gaming experience with read speeds of up to 7400 MB/s.
Cutting-edge cooling technology
Our special edition of the ultra-thin Graphene Cooling heat spreader ensures optimal cooling so that even intense gaming sessions run smoothly.
TS4TSJ25H3P - Transcend StoreJet H3, 4 TB, anti-shock, purple
139.62 EUR
Go rugged. Feel the space. Transcend's StoreJet 25H3 robust external hard drive combines supreme shock-resistant qualities with the USB 3.1 Gen 1 interface, providing ultra-fast file transfers and secure storage for your data. With up to 4 TB of storage capacity, you'll never run out of storage.
Robust and mobile.
The StoreJet 25H3 external hard drive has been developed with the focus on excellent endurance. The sturdy enclosure and non-slip texture allow you to store and share wherever you are. Two colour options, navy blue and purple, provide a stylish, trendy storage experience!
Excellent anti-shock system
The StoreJet 25H3 features a three-stage anti-shock system that has passed the MIL-STD-810G US military transit drop test to fully protect the data stored on the drive. The three-stage shock protection system includes a silicone rubber shell, an internal cushioning shock absorber and a reinforced hard shell enclosure.
GA B550M 09416 - GIGABYTE B550M DS3H (AM4)
100.81 EUR
AMD B550 Ultra Durable motherboard with Pure Digital VRM solution, PCIe 4.0 x16 slot, dual PCIe 4.0/3.0 M.2 connectors, Realtek GbE LAN, Smart Fan 5 with FAN STOP- Supports AMD Ryzen™ 5000 Series/ Ryzen™ 5000 G-Series/ Ryzen™ 4000 G-Series and Ryzen™ 3000 Series processors
- Dual Channel ECC/ Non-ECC Unbuffered DDR4, 4 DIMMs
- 5+3 phase Pure Digital VRM solution with low RDS(on) MOSFETs
- Ultra Durable™ PCIe 4.0 Ready x16 slot
- Two ultra-fast NVMe PCIe 4.0/3.0 M.2 connectors
- High-quality audio capacitors and Audio Noise Guard for ultimate audio quality
- Realtek GbE LAN with bandwidth management
- Support for HDMI and DVI on the rear
- RGB FUSION 2.0 supports addressable LEDs and RGB LED strips
- Smart Fan 5 with multiple temperature sensors, hybrid fan header with FAN STOP
- Anti-sulphur resistor design
FREI AHM4 15,9 - Spacer with M4-stud, H: 15.9 mm
10.26 EUR
Spacer with M4 stud.Board hole/thickness: Ø4.0/1.6 mm
FREI AHM4 12,7 - Spacer with M4-stud, H: 12.7 mm
10.25 EUR
Spacer with M4 stud.Board hole/thickness: Ø4.0/1.6 mm
FREI AHM4 19,1 - Spacer with M4-stud, H: 19.1 mm
10.28 EUR
Spacer with M4 stud.Board hole/thickness: Ø4.0/1.6 mm
GA B550M 10962 - GIGABYTE B550M DS3H AC (AM4)
109.07 EUR
- Supports AMD Ryzen™ 5000 Series/ Ryzen™ 5000 G-Series/ Ryzen™ 4000 G-Series and Ryzen™ 3000 Series Processors
- Dual Channel ECC/ Non-ECC Unbuffered DDR4, 4 DIMMs
- 6+2 Phases Pure Digital VRM Solution with Low RDS(on) MOSFETs
- Ultra Durable™ PCIe 4.0 Ready x16 Slot
- Dual Ultra-Fast NVMe PCIe 4.0/3.0 M.2 Connectors
- Onboard 802.11ac Wireless & BT 4.2 with WIFI Antenna
- High Quality Audio Capacitors and Audio Noise Guard for Ultimate Audio Quality
- Realtek GbE LAN with Bandwidth Management
- Rear HDMI, DVI, and DisplayPort Support
- RGB FUSION 2.0 Supports Addressable LED & RGB LED Strips
- Smart Fan 6 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP
- Q-Flash Plus Update BIOS without Installing the CPU, Memory and Graphics Card
- Anti-Sulfur Resistors Design
DISPLAY VISIONS LCD 204T BL - LCD module, 4x20, H:9.2mm, bl/ws, w.Bel.
113.31 EUR
LCD dot matrix module, 4 x 20 characters• White text on a blue background
• Dot size: 9.22 mm
• Module dimensions: 146 x 63 x 14 mm
• Visible field: 123 x 42 mm
• Controller: KS0073, HD44780 compatible
• White LED backlight
• Ultra low power 15 to 60 mA
Matching black plastic frames with anti-glare acrylic panes are also available. The frame is fastened into the front panel of the housing using a suitable adhesive.
Manufacturer part number: EA W204B-BNLW
FREI AHM4 25,4 - Spacer with M4-stud, H: 25.4 mm
10.28 EUR
Spacer with M4 stud.Board hole/thickness: Ø4.0/1.6 mm
FREI AHM4 34,9 - Spacer with M4-stud, H: 34.9 mm
10.28 EUR
Spacer with M4 stud.Board hole/thickness: Ø4.0/1.6 mm
FREI AHM4 22,2 - Spacer with M4-stud, H: 22.2 mm
10.3 EUR
Spacer with M4 stud.Board hole/thickness: Ø4.0/1.6 mm
DISPLAY VISIONS LCD 204B BL - LCD module, 4x20, H:4.8mm, bl/ws, w.Bel.
49.95 EUR
LCD dot matrix module, 4 x 20 charactersWhite text on a blue background
Dot size: 4.75 mm
Module dimensions: 98 x 60 x 13.6 mm
Visible field: 77 x 25 mm
Controller: KS0073, HD44780 compatible
White LED backlight
Ultra low power 15 to 60 mA
Matching black plastic frames with anti-glare acrylic panes are also available. The frame is fastened into the front panel of the housing using a suitable adhesive.
Manufacturer part number: EA W204B-NLW
DISPLAY VISIONS LCD 164A BL - LCD module, 4x16, H:4.8mm, bl/ws, w.Bel.
35.58 EUR
LCD dot matrix module, 4 x 16 charactersWhite text on a blue background
Dot size: 4.75 mm
Module dimensions: 87 x 60 x 13.6 mm
Visible field: 62 x 21 mm
Controller: KS0070B, HD44780 compatible
White LED backlight
Ultra low power 15 to 60 mA
Matching black plastic frames with anti-glare acrylic panes are also available. The frame is fastened into the front panel of the housing using a suitable adhesive.
ODROID N2 L 4GB - Odroid N2L, 4x 2.2 GHz, 4 GB RAM, USB 3.0, HDMI
133.67 EUR
The low-cost variant of the popular and powerful ARM single-board computer ODROID-N2+. • small and clear form factor: 69 x 56 mm.
• small size allows installation in a wide range of small devices
• suitable for various standalone embedded systems that do not require Ethernet connectivity
• suitable for building robots, drones, arcade consoles, human-machine interface devices and many other applications
• faster and low-power LPDDR4 RAM
• low weight
• low cost
Specifications
• Processor: Amlogic S922X Processor (12nm) / Quad-core Cortex-A73(2.2Ghz) and Dual-core Cortex-A53(2Ghz) / ARMv8-A architecture with Neon and Crypto extensions / Mali-G52 GPU with 6 x Execution Engines (800Mhz)
• GPU: Mali-G52 (800 MHz) (OpenGL-ES 1.1, 2.0, 3.0, 3.1 and 3.2 as well as OpenCL-1.2 and 2.0)
• Memory: 4 GB LPDDR4 with 32-bit 1.1 V (low-power design), 3216 MT/s
• Connections: eMMC up to 128 GB, microSD slot (DS/HS modes up to UHS-I SDR104), HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID), , audio (1x HDMI digital output), 2x ADC input
• 40-pin male header
• built-in heat sink + fan
• operating voltage: 12 V / 2 A (hollow socket 5.5 mm outside and 2.1 mm inside)
• board dimensions incl. fan/heatsink (LxWxH): 69 x 56 x 22 mm
Note: Because the DRAM chip has been changed from DDR4 to LPDDR4, the existing operating system image for N2/N2+ can NOT be booted on the N2L!
Currently there are the following operating system images for the N2L:
• Android 9.0 64bit and 32bit images
• Ubuntu 22.04 Mate / Minimal with Kernel 4.9
• Ubuntu 22.04 Desktop with Kernel 5.15 and Upstream
• EmuELEC (TBD)
external links
http://forum.odroid.com (forum)
http://hardkernel.com (manufacturer)
http://magazine.odroid.com (magazine)
https://wiki.odroid.com/start (Software)
DISPLAY VISIONS LCD 404B BL - LCD module, 4x40, H:4.9mm, bl/ws, w.Bel.
92.38 EUR
LCD dot matrix module, 4 x 40 charactersWhite text on a blue background
Dot size: 4.89 mm
Module dimensions: 190 x 54 x 13.6 mm
Visible field: 147 x 29.5 mm
Controller: KS0076B/KS0063, HD44780 compatible
White LED backlight
Ultra low power 15 to 60 mA
Matching black plastic frames with anti-glare acrylic panes are also available. The frame is fastened into the front panel of the housing using a suitable adhesive.