Nippes Ceramic callus rasp Clear
17.04 EUR
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; it classifies in the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Callus rasp with 2 sides, coarse and fine.
EAN: 4028841158069
Delivery Cost: 5.99 EUR
Availability: in stock
Delivery Time: available (delivery in 3-5 days)
Condition: new
Comparison of Similar Products
LCN Bio Glass Gel „Stress-less“ Clear 10 ml
67.99 EUR
"LCN BIO Glass Gel is a 100% acid-free gel made of bio-ceramic material with nail-building ingredients.Bio-Glass contains only compounds that are accepted by the human body. This helps avoid the body's reaction of stress shielding, which is the encapsulation and repulsion of a foreign body.Bio-Glass creates a natural bond to the natural nail. Due to its special inorganic composition, Bio-Glass is not rejected by the body, but supports the formation of new tissue. In particular, adhesion to the natural nail is improved. Bio-Glass also acts as a carrier of bioactive depot substances.Suitable for all nail types, especially sensitive nails. With adhesion and build-up properties.The advantages of Bio Glass Gel at a glance:awarded with the Dermatest """"very goodstrong adhesion properties100 % acid-free and veganpermanently regenerates damaged nailsCamouflage optics conceals discolorationsApplication:Apply the BGG to the natural or artificial nail and build up.Then cure (2 minutes in the UV tube unit or 60 seconds in the LED unit). The BGG in a delicate pastel shade, suitable for all nail types, appears silky-matt after removal of the dispersion layer.Then seal with an LCN sealer of your choice."
LOCTITE 595 - Loctite SI 595 silicone, clear, 40 ml tube, body repair, seam se
22.34 EUR
Body repair - seam sealing, suitable for glass, metals, ceramics, composites as well as most plastics.
LOCTITE® 595 body repair - seam sealing, suitable for glass, metals, ceramics, composites as well as most plastics.
GREENLED GL 4010 - LED lamp 15SMD, 4.8 W, 380 lm, 4000 K
14.34 EUR
Suitable for swivelling mounting rings, with SMD LEDs, ceramic housing, clear protective glass and 20-cm connection wire, average life of 20,000 hours, non-dimmable, diameter 50 mm, height 20 mm, for 230-V mains voltage
GREENLED GL 4025 - MCOB module, 6 W, 390 lm, 4000 K, dimmable
17.23 EUR
Suitable for swivelling mounting rings, with MCOB LED, ceramic housing, clear protective glass and 20-cm connection wire, average life of 20,000 hours, dimmable with phase-cut dimmer, use only in combination with with dimmer, diameter 50 mm, height 33 mm, for 230-V mains voltage
GREENLED GL 4018 - MCOB module, 6 W, 390 lm, 3000 K, dimmable
19.46 EUR
Suitable for swivelling mounting rings, with MCOB LED, ceramic housing, clear protective glass and 20-cm connection wire, average life of 20,000 hours, dimmable with phase-cut dimmer, use only in combination with suitable dimmer, diameter 50 mm, height 33 mm, for 230-V mains voltage
GREENLED GL 4015 - Module MCOB, 5 W, 390 lm, 3000 K
15.16 EUR
Suitable for swivelling mounting rings, with MCOB LED, ceramic housing, clear protective glass and 20-cm connection wire, average life of 20,000 hours, non-dimmable, diameter 50 mm, height 33 mm, for 230-V mains voltage
GREENLED GL 4310 - Module 15SMD, 12 V, 5 W, 400 lm, 3000 K - frosted
14.34 EUR
Suitable for swivelling mounting rings, with SMD-LEDs, ceramic housing, clear protective glass and a 20-cm connection wire, average life of 20,000 hours, non-dimmable, diameter 50mm, height 20 mm, operates using 12 VDC ballasts or 12 VAC low-voltage transformers (note minimum load)
GREENLED GL 4476 - LED module 230 V, 5.5 W, 470 lm, 3000 K
17.34 EUR
LED module CERA-COB 230 V
Suitable for most mounting rings thanks to conical ceramic housing, with COB LED, clear protective glass and 15-cm connection cable, average life of 20,000 hours, non-dimmable, diameter 50 mm, height 32 mm, for 230-V mains voltage
GREENLED GL 4472 - LED module 230 V, 5.5 W, 470 lm, 3000 K
17.23 EUR
LED module CERA-COB 230 V
Suitable for most mounting rings thanks to conical ceramic housing, with COB LED, clear protective glass and 15-cm connection cable, average life of 20,000 hours, non-dimmable, diameter 50 mm, height 32 mm, for 230-V mains voltage
GREENLED GL 4470 - LED module 230 V, 2.2 W, 230 lm, 3000 K
16.1 EUR
LED module CERA-COB 230 V
Suitable for most mounting rings thanks to conical ceramic housing, with COB LED, clear protective glass and 15-cm connection cable, average life of 20,000 hours, non-dimmable, diameter 50 mm, height 32 mm, for 230-V mains voltage
GREENLED GL 4473 - LED module 230 V, 8 W, 690 lm, 3000 K, dimmable
22.4 EUR
suitable for most mounting rings due to conical ceramic housing, with COB-LED, clear protecting glass and connecting cable 15cm, average life 20.000 hours, dimmable with phase-cut dimmer, Ø50mm, height 32mm, for mains voltage 230V
GREENLED GL 4471 - LED module 230 V, 3.6 W, 360 lm, 3000 K
16.19 EUR
LED module CERA-COB 230 V
Suitable for most mounting rings thanks to conical ceramic housing, with COB LED, clear protective glass and 15-cm connection cable, average life of 20,000 hours, non-dimmable, diameter 50 mm, height 32 mm, for 230-V mains voltage
RUDERER L 530 - Modelmaking glue, plastic glue, Ruderer L 530, 20 g
14.65 EUR
Ruderer L530 Original Adhesive - solvent-based plastic adhesive.
Crystal clear adhesive for bonding a wide variety of plastics such as PS, PSB, SAN, ABS, celluloid, Plexiglas, PVC hard with each other and with glass, ceramics, wood and many others.
Not suitable for PE, PP, PET, POM, EPDM or Teflon®. Adhesive surfaces must be clean, dry and free of oil. Apply adhesive to the material and bond immediately when wet. Fix sufficiently until cured.
VISATON VIS 1191 - Magnetically Shielded Speaker 25 mm / 140 W
180.39 EUR
Magnetically shielded 25 mm (1”) high end dome tweeter made of ceramic for crystal clear, perfectly reproduced sound even at high volume settings and with no distortion. The pole piece perforation coupled with the flow-optimised rounded shape, the damping in the cavity and the ventilated voice coil carrier guarantee a very low resonance frequency. The impedance is linearised by means of an integrated LRC element. This means that the dome can be easily integrated in a network of crossovers. The protective grille is fitted on the inside with an acoustic low-pass filter in the shape of a transparent ring, which does not begin to operate until 25 kHz are achieved, when it damps any material-borne resonance. The grille has the added advantage of improving omnidirectional sound distribution at higher frequencies.