NAVILOCK 62530 - GPS receiver/u-blox 8/serial MD6/roof mounting/10.00 m
144.31 EUR
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; falls into the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
GNSS Beidou Galileo Glonass GPS NL-8222MP u-blox 8 serial MD6 roof mounting marine 10.00 m Navilock
The MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8222MP GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 10 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
EAN: 4043619625307
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
GNSS Beidou Galileo Glonass GPS NL-8222MP u-blox 8 serial MD6 roof mounting marine 10.00 m Navilock
The MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8222MP GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 10 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
EAN: 4043619625307
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
NAVILOCK 62529 - GPS receiver/u-blox 8/serial MD6/roof mounting/5.00 m
122.61 EUR
GNSS Beidou Galileo Glonass GPS NL-8022MP u-blox 8 serial MD6 roof mounting marine 5.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8022MP GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62524 - GPS receiver/u-blox 8/USB/4.5 m
133.93 EUR
GNSS Beidou Galileo Glonass GPS NL-8012U u-blox 8 USB 4.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• USB specification 2.0
• Auto baud rate up to 115,200 bps
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 4.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62526 - GPS receiver/u-blox 8/serial MD6/5.0 m
144.27 EUR
GNSS Beidou Galileo Glonass GPS NL-8003P u-blox 8 serial MD6 5.0 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 1.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62447 - GNSS GPS receiver u-blox NEO-6P outdoor
216.57 EUR
Use this GPS receiver with PPP (Precision Point Positioning) for very precise positioning tasks.PPP in conjunction with SBAS is used for high-precision applications in taking measurements, maritime and agriculture (precision farming).
Technical data
• Chipset: u-blox NEO-6P
• PPP (Precision Point Positioning)
• Hybrid chipset for GPS/SBAS (WAAS, EGNOS, MSAS)
• Integrated anti-jamming technology
• Integrated A-GPS technology with AssistNow online and AssistNow offline
• Built-in GPS patch antenna
• Reception frequency: GPS L1 1575.42 MHz
• Receiver sensitivity: -160 dBm
• Update rate: 1 Hz
• Positioning accuracy: SBAS + PPP < 1 m
• Auto baud rate up to 115,200 bps (default 38,400 bps)
• Central fastening thread with central cable
• Optional adapter cable to RS232 SUB-D9 or USB
• Cable length: 5.00 m
• Operating temperature: -20 °C ~ 65°C
• Dimensions (LxWxH): 62 mm x 21 mm
• Power supply: 5 V via PS/2 or USB
• Power consumption: 60 mA at 5 V
• Housing: IPX7 protection class
System requirements
• Windows 2000/XP/Vista/7/8/CE, Windows Mobile 4/5/6, Mac, Linux 2.4.x
• MD6 connection cable
Package contents
• GNSS receiver
• Stainless steel mounting hardware
NAVILOCK 62525 - GPS receiver/u-blox 8/serial MD6/1.50 m
108.04 EUR
GNSS Beidou Galileo Glonass GPS NL-8003P u-blox 8 serial MD6 1.50 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 1.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 61844 - NL-650ERS u-blox 6 GPS Engine Board
87.42 EUR
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses RS232.Technical details
- Connector: WTB serial RS-232, 6 pin, pitch 1.0 mm
- Chipset u-blox 6 GPS SuperSense®
- Sensitivity -160 dBm
- AssistNow offline (14 days almanach)
- DGPS, WAAS, EGNOS and MSAS support
- Short TTFF (Time To First Fix) also at low signal level
- Support NMEA 0183 protocol
- Internal patchantenna
Package content
- GPS module
- CD-ROM
Package
- Poly bag
NAVILOCK 61846 - GPS Engine Module NL-652ETTL u-blox 6
87.42 EUR
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses TTL 3.30 V.Technical details
- Connector: WTB serial TTL, 6 pin, pitch 1.0 mm
- Chipset u-blox 6 GPS SuperSense®
- Sensitivity -160 dBm
- AssistNow offline (14 days almanach)
- DGPS, WAAS, EGNOS and MSAS support
- Short TTFF (Time To First Fix) also at low signal level
- Support NMEA 0183 protocol
- Internal patchantenna
- Internal TTL level converter
Package content
- GNSS module
Package
- Poly bag
NAVILOCK 61843 - Navilock GPS receiver/u-blox 6/serial
113.3 EUR
The GPS receiver with the u-blox 6 SuperSence chipset receives WAAS and EGNOS data as well as GPS.The MD6 universal connector allows optional USB or serial cables to be connected. The NL-604P GPS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
- u-blox 6 GPS SuperSense® high-performance chip/marine design in white
- GPS receiver with MD6 Navilock connector (USB or serial cable available as an option)
- Internal patch antenna
- Central fastening thread with central cable
- Frequency: L1, 1575.42 MHz, C/A code: 1023 MHz
- Processes the signals from up to 50 satellites simultaneously
- Supports AssistNow offline (14 days of almanac data)
- Supports AGPS, WAAS, EGNOS and MSAS
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Baud rate: 9600 (configurable up to 115,200)
- Update rate: up to 5 Hz
- Max. sensitivity: –162 dBm
- Waterproof housing (IPX7)
- Operating temperature range: -20°C to +60°C
- Cold start in approx. 25 seconds
- Hot start in approx. 1 second
- Cable length: 5 m
- Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Dimensions: 62 mm x 21 mm
System requirements
- Linux from Kernel 2.6
Mac
Windows 98SE/ME/2000/XP/Vista/7/8
Windows Mobile 2003/5/6
Android from V2.1 - MD6 connection cable
NAVILOCK 61841 - NL-603P MD6 serial GPS receiver u-blox 6 1.5 m
108.09 EUR
The MD6 serial GPS Receiver based on u-blox 6 chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.Technical details
- Connector: MD6 Navilock plug (USB or serial cable are optional available)
- Chipset: u-blox 6 UBX-G6000-BT
- Frequency: GPS: L1, 1575.4200 MHz
- Accepts the signals of up to 50 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Baud rate: 9600 (up to 115200)
- Update rate: up to 5 Hz
- Sensibility max. -162 dBm
- IPX6 protection class
- Magnetic, non-slip on the bottom
- LED-indicator for GPS status
- Operating temperature: -20 °C ~ 60 °C
- Power supply: 5 V DC
- Current consumption: max. 80 mA
- Cold start in ca. 25 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 1.5 m
- Dimensions (LxWxH): ca. 65 x 45 x 22 mm
System requirements
- Windows 98SE/ME/2000/XP/Vista/7/8.1/10, Windows Mobile 2003/5/6, Mac OSX ,
Linux Kernel 2.6 - MD6 connection cable
Package content
- MD6 serial receiver
- Navilock support CD incl. driver and user manual
Package
- Retail Box
NAVILOCK 61840 - GPS/Galileo receiver u-blox 6
92.63 EUR
The USB 2.0 GPS receiver with the u-blox 6 SuperSense® chipset has a built-in active antenna.It can be used for navigation in conjunction with a notebook and the corresponding navigation software.
Technical data
• u-blox 6 GPS SuperSense® high-performance chip
• Frequency: L1, 1575.42 MHz, C/A code: 1023 MHz
• Processes the signals from up to 50 satellites simultaneously
• Supports AGPS, WAAS, EGNOS and MSAS
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• USB specification 2.0
• Auto baud rate up to 115,200
• Update rate: up to 5 Hz
• Max. sensitivity: –162 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C to +60°C
• Cold start in approx. 25 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Dimensions (LxWxH): 65 mm x 45 mm x 22 mm
• Cable length: 1.50 m
System requirements
• Windows XP/Vista/7/8, Linux from Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• CD driver
• User manual on CD ROM
NAVILOCK 62523 - GPS receiver/u-blox 8/USB/1.5 m
109.12 EUR
GNSS Beidou Galileo Glonass GPS NL-8002U u-blox 8 USB 1.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• USB specification 2.0
• Auto baud rate up to 115,200 bps
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 1.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• CD driver
• User manual on CD ROM Packaging• Retail box
NAVILOCK 62798 - MD6 GNSS receiver, NL-803P EVA-M8Q, u-blox 8, 5 m
113.26 EUR
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-803P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.Technical details
- Connector: MD6 Navilock plug (USB or serial cable are optional available)
- Chipset: u-blox 8 EVA-M8Q
- Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz - Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate up to 115200 bps
- PPS signal on pin 6 (LVTTL 3.3 V)
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)
multi GNSS: 10 Hz (e.g. GPS+GLONASS) - Sensibility: max. -164 dBm
- Protection class: IPX7
- Operating temperature: -10 °C ~ 50 °C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 5 m
- Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
System requirements
- Android 10.0 or above
- Chrome OS 90.0 or above
- Linux Kernel 5.8 or above
- Windows 10/10-64/11
- MD6 connection cable
Package content
- MD6 serial receiver
- Mounting material: stainless steel nut and washer
Package
- Box
NAVILOCK 62531 - GPS receiver/u-blox 8/USB/roof mounting/4.50 m
123.64 EUR
GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mounting 4.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The NL-8004U GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 4.5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62532 - GPS receiver/u-blox 8/USB/roof mounting/4.50 m
144.27 EUR
GNSS Beidou Galileo Glonass GPS NL-8022MU u-blox 8 USB roof mounting marine 4.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The NL-8022MU GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 4.5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62575 - GNSS GPS engine module/u-blox 8/USB
80.03 EUR
GNSS modules are fully assembled receivers with a patch antenna, back-up battery, etc. This version uses USB.Technical data
• Connection: WTB USB
• u-blox 8 UBX-M8030-KT chipset
• Frequencies:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• LED display of GPS status
• Operating temperature: -40ºC ~ 85ºC without battery
-20°C ~ 60°C with battery
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Dimensions: (LxWxH): approx. 30 x 30 x 7.9 mm
System requirements
• Device with internal USB interface
Package contents
• GNSS engine module
• Navilock support CD Packaging• Retail box
NAVILOCK 61265 - GPS RS-232 connection cable
28.25 EUR
Serial Navilock GNSS receivers have an MD6 universal connector plug. The pin assignment of this plug is identical for the u-blox, Sony, GLONASS and SiRF chipsets. You will need this specific connection cable to connect the GNSS receiver to a serial port. It is connected to the power supply using the PS2 socket of the notebook, tablet PC etc. The PS2 connection is purely a power connection and does not carry any data channels. The data protocol is provided via the SUB-D9 plug.Technical data
- To connect to the D-Sub 9 serial port
- Powered by PS2
- MD6 Navilock GNSS 6-pin receiver socket
- Cable length of 6-pin connection cable: 59 cm (includes connectors)
- PS/2 cable length: 39 cm (includes connectors)
Package contents
• Connection cable for GNSS receivers
NAVILOCK 61845 - NL-651EUSB u-blox 6
77.08 EUR
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses USB 2.0.Technical details
- Connector: WTB, USB 2.0, 6 pin, pitch 1.0 mm
- Chipset u-blox 6 GPS SuperSense®
- Sensitivity -160 dBm
- AssistNow offline (14 days almanach)
- DGPS, WAAS, EGNOS and MSAS support
- Short TTFF (Time To First Fix) also at low signal level
- Support NMEA 0183 protocol
- Internal patch antenna
Package content
- GNSS module
Package
- Poly bag
NAVILOCK 62571 - GNSS GPS engine module/u-blox 8/TTL
90.57 EUR
GNSS modules are completely assembled receivers with patch antenna, backup battery etc.. This version uses TTL 3.30 V.Technical data
• Connection: WTB serial TTL
• u-blox 8 UBX-M8030-KT chipset
• Frequencies:
GPS: L1, 1575,4200 MHz
GLONASS: L1, 1602.5625 ~ 1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline,
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto Baud Rate up to 115200 bps
• Update Rate:
single GNSS: 18 Hz (e.g. GPS solo).
multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Sensitivity max. -167 dBm
• LED display for GPS status
• Operating temperature: -20 °C ~ 60 °C
• cold start in approx. 26 seconds
• hot start in approx. 1 second
• Position accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• dimensions: 30 x30 x 7.90 mm
Package contents
• engine module
Packing
- Poly Bag
NAVILOCK 62527 - GPS receiver/u-blox 8/serial MD6/roof mounting/5.00 m
139.1 EUR
GNSS Beidou Galileo Glonass GPS NL-8004P u-blox 8 serial MD6 roof mounting 5.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8004P GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62781 - USB GNSS receiver, NL-802U EVA-M8Q, u-blox 8, 1.5 m
97.76 EUR
The USB 2.0 Multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. It is possible to use this Multi GNSS receiver with a laptop and suitable routing software for navigation.Technical details
- Connector: 1 x USB 2.0 Type-A male
- Chipset: u-blox 8 EVA-M8Q
- Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz - Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate up to 115200 bps
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)
multi GNSS: 10 Hz (e.g. GPS+GLONASS) - Sensibility: max. -164 dBm
- Protection class: IPX6
- Magnetic, non-slip on the bottom
- LED-indicator for GPS status
- Operating temperature: -10 °C ~ 50 °C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 1.5 m
- Dimensions (LxWxH): ca. 65 x 45 x 22 mm
System requirements
- Android 10.0 or above
- Chrome OS 90.0 or above
- Linux Kernel 5.8 or above
- Windows 10/10-64/11
Package content
- USB 2.0 receiver
Package
- Box
NAVILOCK 60447 - GNSS GPS Engine Module, u-blox, TTL PPS
40.95 EUR
The NL-731ETTL by Navilock is an extremely small powerful GNSS GPS module with u-blox 7 chipset. It is characterized by fast response, high sensitivity and low power consumption.Note
Upon delivery, the module receives GPS/QZSS.
Specification
• Connectors:
1 x WTB serial TTL
1 x MHF (I-PEX) jack, U.FL (Hirose) compatible
• u-blox UBX-G7020-KT module
• Frequency:
GPS: L1 C/A, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
GLONASS: L10F, 1598.0625 - 1605.375MHz
• Accepts the signals of up to 56 satellites at the same time
• Supports AssistNow online/offline,
SBAS (WAAS, EGNOS, MSAS)
• Supports NMEA 0183 protocols: GGA, GLL, GSA, GSV, RMC, VTG, TXT
• Auto Baud Rate up to 115200 bps
• Update rate: up to 10 Hz
• Sensibility: -162 dBm tracking / -148 dBm acquisition (GPS)
• Operating temperature: -40 °C ~ 85 °C
• Power supply: 3.3 - 3.6 V
• Current consumption: max. 40 mA
• Cold start in ca. 29 seconds
• Hot start in ca. 1 second
• Positioning accuracy:
2.5 m CEP (Circular Error Probable)
2.0 m CEP with SBAS (Circular Error Probable)
• Dimension (LxWxH): ca. 12 x 10 x 3.5 mm
System requirements
• Device with a free TTL 3.3 V connector
• GNSS antenna with MHF plug
Package content
• Engine module
• Navilock support CD
NAVILOCK 62528 - GPS receiver/u-blox 8/serial MD6/roof mounting/10.00 m
135.02 EUR
GNSS Beidou Galileo Glonass GPS NL-8044P u-blox 8 serial MD6 roof mounting 10.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8044P GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 10 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 61264 - Connection cable, MD6 > USB, for GNSS receiver
40.86 EUR
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a USB port you need this specific connecting cable. The USB connector provides power to the GNSS receiver and contains the data channels. For integration into the device features of a notebook or tablet PC you need to install the enclosedProlific USB to serial driver. It will provide a virtual serial port on your device.
Technical details
- For connection to USB port
- Internal serial to USB bridge (driver enclosed)
- MD6 Navilock GNSS receiver female jack 6 pin
- Chipset: Prolific PL-2303 TA
- cable length 52 cm (connectors included)
System requirements
- Windows XP/Vista/7/8/10
- For devices with OTG function and optional OTG adapter: Windows 10
Package content
- Connection cable for PDA GPS Receiver
Package
- Zip poly bag
NAVILOCK 62576 - GNSS GPS engine module/u-blox 8/RS-232
97.8 EUR
GNSS modules are fully assembled receivers with a patch antenna, back-up battery, etc. This version uses the RS-232 serial interface.Technical data
• Connector: WTB serial RS-232
• u-blox 8 UBX-M8030-KT chipset
• Frequencies:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• LED display of GPS status
• Operating temperature: -40ºC ~ 85ºC without battery
-20°C ~ 60°C with battery
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Dimensions: (LxWxH): approx. 30 x 30 x 7.9 mm
System requirements
• Device with RS-232 serial interface
Package contents
• GNSS engine module
• Navilock support CD Packaging• Retail box
NAVILOCK 62973 - M8 male > M8 fem. wp. 3 m for M8 GNSS receiver
38.79 EUR
The waterproof M8 extension cable by Navilock serves the extended connection of the Navilock M8 GNSS receivers to various Navilock M8 adapter cables.Specification
• Connectors:
1 x M8 male >
1 x M8 female
• Cable gauge: 28 AWG
• Waterproof
• Cable colour: black
• Length incl. connectors (L): ca. 3 m
System requirements
• A Navilock serial M8 GNSS receiver
Package content
• Extension Cable for M8 GNSS receiver
Package
• Poly bag
NAVILOCK 62975 - M8 male > M8 fem. wp. 10 m for M8 GNSS receiver
46.08 EUR
The waterproof M8 extension cable by Navilock serves the extended connection of the Navilock M8 GNSS receivers to various Navilock M8 adapter cables.Specification
• Connectors:
1 x M8 male >
1 x M8 female
• Cable gauge: 28 AWG
• Waterproof
• Cable colour: black
• Length incl. connector (L): ca. 10 m
System requirements
• A Navilock serial M8 GNSS receiver
Package content
• Extension Cable for M8 GNSS receiver
Package
• Poly bag
NAVILOCK 60511 - NL-69AT FAKRA C Jack GNSS active Antenna RG 174/U 3 m outdoor
46.02 EUR
This GNSS antenna by Navilock can be used on an existing GNSS receiver, car radio or vehicle multimedia receiver with FAKRA C connection. The antenna is waterproof and can therefore be used temporarily outside the vehicle.Specification
• Connector: 1 x FAKRA C Jack
• FAKRA C: RAL 5005 Signal blue
• Frequency range: 1575.42 MHz
• GALILEO: E1 1,5754200 GHz, GPS: L1, 1.5754200 GHz
• Band width: 2 MHz
• Antenna gain: 27 dBi
• Impedance: 50 Ohm
• Mounting: Magnet base
• Housing material: ABS
• Colour: black
• Protection class: IP67
• Cable type: RG 174/U
• Cable colour: black
• Cable attenuation: 1.1 dB @ 1500 MHz per meter
• Cable length incl. connector: ca. 3 m
• Dimensions (LxWxH): 40.5 x 38.0 x 12.0 mm
• DC input: 3.0 - 5.5 V
• Power consumption:
11 mA @ 3.0 V typ.
15 mA @ 3.0 V max.
• Weight: 150 g
System requirements
• Device with a free FAKRA C plug
Package content
• Antenna
Package
• Poly bag
NAVILOCK 63278 - Connection Cable M8 male waterproof > MD6 female RS-232 0.2 m
21.31 EUR
This waterproof connection cable by Navilock forwards the serial RS-232 signals of the GNSS receiver at the MD6 connection to the M8 male. The M8 connector allows adaptation to a large number of connectors.Specification
- Connectors:
1 x M8 male >
1 x MD6 female - Data transfer: bidirectional
- Length incl. connectors (L): ca. 0.2 m
System requirements
- A Navilock serial M8 GNSS receiver
Package content
- Connection cable for GNSS receiver
Package
- Poly bag
U-BLOX CAM-M8Q - GPS module, ±2.5m, -167dBm, 2.7..3.6 Vcc
51.92 EUR
Intelligent antenna module for omnidirectional GNSS receptionThe u-blox CAM-M8 series antenna modules are based on the
Exceptional performance of the u-blox M8 GNSS engine. That
CAM-M8 modules allow for simultaneous reception of up to three
GNSS systems (GPS/Galileo together with either BeiDou or
GLONASS) and provide high sensitivity and high signal levels
In an ultra-compact form factor.
Key features
- Simultaneous reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
- Small in size and weight with low power consumption
- Embedded, omni-directional and broadband antenna
- Industry-leading navigation sensitivity of -167 dBm
- Optional external antenna
The integration of the CAM-M8 series modules into customer projects is simple and uncomplicated thanks to the integrated GNSS antenna, the small footprint of 9.6 x 14 x 1.95 mm and the highly developed
Interference suppression that enables maximum performance even in environments hostile to GNSS.
The low power consumption and thin design allow the end devices to become slimmer and smaller. The CAM-M8 modules also support message integrity protection, geofencing, and spoofing detection.
Despite their miniature size, the chip antennas in the modules of the CAM-M8 series are compared to conventional patch antennas. Optimum performance is achieved by following the design instructions in the Hardware Integration Guide, as the customer's PCB is part of the antenna solution.
The omni-directional radiation pattern increases flexibility in equipment installation. The CAM-M8 modules can optionally be connected to an external GNSS antenna. The SMD design reduces manufacturing costs to a minimum and
The low mass ensures high reliability.
Technical features
COMMUNICATION PROTOCOLS: NMEA, RTCM, UBX
Position accuracy Autonomous 2.5 m CEP
Cold start detection 26 s, supports 2 s.
Recover 1 second
NAVILOCK 62875 - Connection cable, M8 waterproof socket > DB9 socket
61.58 EUR
This waterproof connection cable by Navilock forwards the serial RS-232 signals of the GNSS receiver at the M8 connection to the DB9 female. Power is supplied to the GNSS receiver via the USB Type-A male.Technical details
- Connectors:
1 x M8 female >
1 x DB9 female >
1 x USB Type-A male - Power supply via USB
- Data transfer: bidirectional
- Length incl. connectors (L): ca. 1.2 m
System requirements
- A Navilock serial M8 GNSS receiver
Package content
- Connection cable for GNSS receiver
- Navilock support CD
Package
- Zip poly bag
NAVILOCK 12669 - Nut for GNSS antenna, 15.875 mm, 10 pieces
66.75 EUR
This Nylon nut by Navilock is used to mount a GNSS receiver e.g. on a vehicle roof.Technical details
- Inner thread: 15.8750 mm (5/8'' - 11 UNC)
- Spanner width SW: 23.8125 mm (15/16'')
- Height: 9.5250 mm (3/8'')
- Material: Nylon
System requirements
- Navilock GNSS roofmount receiver
Package content
- 10 x Nylon nut
Package
- Zip poly bag
U-BLOX MAX-M8W - GPS module, ±2.5m, -167dBm, 2.7..3.6 Vcc
41.99 EUR
Small GNSS modules for easy mountingKey features
- Simultaneous reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
- Industry-leading navigation sensitivity of -167 dBm
- Product variants to meet performance and cost requirements
- Miniature LCC chassis
- Excellent protection against spoofing and jamming
- PIN compatible with MAX-7 and MAX-6
NAVILOCK 60508 - Navilock GPS antenna/FAKRA C socket
50.88 EUR
This Navilock GPS antenna can be used with an existing GPS receiver, car radio or vehicle multimedia receiver with FAKRA-C connector. You can improve reception by positioning the antenna with an unobstructed view of the sky, such as on the roof or the parcel shelf. The antenna is waterproof and can therefore also be used temporarily on the vehicle exterior.Technical data
• External active GPS additional antenna
• Frequency: L1 band 1575.42 MHz
• Gain: 27 dBi
• FAKRA C socket, blue
• RG174 cable
• Cable length: 5 m
• Impedance: 50 ohm
• Dimensions: 38.00 x 40.50 x 12.30 mm
• Input voltage: 3.0 - 5.5 V
• Power consumption: typical: 11 mA, max. 15 mA at 3.0 V
• Weight: 150 g
NAVILOCK 62907 - Connection Cable MD6 Serial > D-SUB 9
27.47 EUR
This cable by Navilock is intended for all GNSS receivers with the Navilock MD6 connector. The RS232 SUB-D9 connection transmits the serial data. The USB connector on the cable provides power to the receiver.Specification
• Connector: 1 x MD6 female, 1 x D-SUB 9 female with screws, 1 x USB Type-A male
• Power supply via USB
• Length incl. connector: MD6 cable: ca. 59 cm, USB cable: ca. 39 cm
System requirements
• a Navilock serial MD6 GNSS receiver
• a free SUB-D9 male port
Package content
• Connection cable for GNSS receiver
Package
• Poly bag
NAVILOCK 63165 - Connection cable, M8 socket serial, waterproof > RJ45
40.91 EUR
This waterproof connection cable from Navilock provides the serial signals of the M8 receivers via RJ45.Technical details
- Connectors:
1 x M8 female
1 x RJ45 male - Data transfer: bidirectional
- Cable gauge: 28 AWG
- Waterproof
- Cable colour: black
- Length incl. connectors (L): ca. 2.8 m
System requirements
- A Navilock serial M8 GNSS receiver
Package content
- Connection cable for M8 GNSS receiver
Package
- Zip poly bag
NAVILOCK 60506 - Navilock GPS antenna/SMA connector/3.0 m
40.55 EUR
Navilock GPS antenna, external aerialThis Navilock GPS antenna can be used with an existing GPS receiver or PNA with SMA connector. You can improve reception by positioning the antenna with an unobstructed view of the sky, such as on the roof or the parcel shelf. The antenna is waterproof and can therefore also be used temporarily on the vehicle exterior.
Technical data:
• GPS antenna with SMA connector
• With magnetic base
• Waterproof: water depth of up to 50 cm, no longer than 30 minutes
• Operating temperature range: -30 °C to +80 °C.
• Cable length: approx. 3 m
• Frequency: L1 band 1575.42 MHz
• Aerial gain: 27 dBi
• Power consumption: typical: 11 mA, max. 15 mA at 3 V
• DC input 3.0 ~ 5.5 V
• Bandwidth 2 MHz
• Weight: 150 g
• Dimensions (LxWxH): 40.5 x 38 x 3 mm
NAVILOCK 60332 - Multi GNSS aerial, M8 plug
164.98 EUR
The M8 serial multi GNSS receiver with the u-blox 8 chipset has a built-in active aerial. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The M8 universal connector is waterproof and makes it possible to use connection cables, if desired. Specifications
- Connection: 1 x M8 Navilock waterproof connector
- Chipset: u-blox 8 UBX-M8030-KT
- Frequency:
- GPS: L1, 1575.4200 MHz
- GLONASS: L1, 1602 (k x 0.5625) MHz
- BEIDOU COMPASS: B1, 1561.0980 MHz
- GALILEO: E1, 1575, 4200 MHz
- QZSS: L1, 1575.4200 MHz
- Processes the signals from up to 72 satellites simultaneously
- Supports AssistNow online/offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto baud rate up to 115,200 bps
- PPS signal to pin 6 (LVTTL 3.3 V)
- Update rate:
- Single GNSS: 18 Hz (e.g. GPS solo)
- Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
- Max. sensitivity: -167 dBm
- IPX7 protection class
- Operating temperature: -20°C ~ 60°C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in approx. 26 seconds
- Hot start in approx. 1 second
- Positional accuracy: 2.5 m CEP and 2 m CEP with SBAS
- Cable length: approx. 0.25 m
- Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
- Windows Vista/7/8/8.1/10, Linux Kernel 2.6, Mac OS X
- M8 connection cable