NAVILOCK 61264 - Connection cable, MD6 > USB, for GNSS receiver
40.86 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a USB port you need this specific connecting cable. The USB connector provides power to the GNSS receiver and contains the data channels. For integration into the device features of a notebook or tablet PC you need to install the enclosed
Prolific USB to serial driver. It will provide a virtual serial port on your device.
Technical details
System requirements
Package content
Package
EAN: 4043619612642
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a USB port you need this specific connecting cable. The USB connector provides power to the GNSS receiver and contains the data channels. For integration into the device features of a notebook or tablet PC you need to install the enclosed
Prolific USB to serial driver. It will provide a virtual serial port on your device.
Technical details
- For connection to USB port
- Internal serial to USB bridge (driver enclosed)
- MD6 Navilock GNSS receiver female jack 6 pin
- Chipset: Prolific PL-2303 TA
- cable length 52 cm (connectors included)
System requirements
- Windows XP/Vista/7/8/10
- For devices with OTG function and optional OTG adapter: Windows 10
Package content
- Connection cable for PDA GPS Receiver
Package
- Zip poly bag
EAN: 4043619612642
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
NAVILOCK 62529 - GPS receiver/u-blox 8/serial MD6/roof mounting/5.00 m
122.61 EUR
GNSS Beidou Galileo Glonass GPS NL-8022MP u-blox 8 serial MD6 roof mounting marine 5.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8022MP GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62530 - GPS receiver/u-blox 8/serial MD6/roof mounting/10.00 m
144.31 EUR
GNSS Beidou Galileo Glonass GPS NL-8222MP u-blox 8 serial MD6 roof mounting marine 10.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8222MP GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 10 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62798 - MD6 GNSS receiver, NL-803P EVA-M8Q, u-blox 8, 5 m
113.26 EUR
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-803P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.Technical details
- Connector: MD6 Navilock plug (USB or serial cable are optional available)
- Chipset: u-blox 8 EVA-M8Q
- Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz - Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate up to 115200 bps
- PPS signal on pin 6 (LVTTL 3.3 V)
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)
multi GNSS: 10 Hz (e.g. GPS+GLONASS) - Sensibility: max. -164 dBm
- Protection class: IPX7
- Operating temperature: -10 °C ~ 50 °C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 5 m
- Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
System requirements
- Android 10.0 or above
- Chrome OS 90.0 or above
- Linux Kernel 5.8 or above
- Windows 10/10-64/11
- MD6 connection cable
Package content
- MD6 serial receiver
- Mounting material: stainless steel nut and washer
Package
- Box
NAVILOCK 62527 - GPS receiver/u-blox 8/serial MD6/roof mounting/5.00 m
139.1 EUR
GNSS Beidou Galileo Glonass GPS NL-8004P u-blox 8 serial MD6 roof mounting 5.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8004P GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62447 - GNSS GPS receiver u-blox NEO-6P outdoor
216.57 EUR
Use this GPS receiver with PPP (Precision Point Positioning) for very precise positioning tasks.PPP in conjunction with SBAS is used for high-precision applications in taking measurements, maritime and agriculture (precision farming).
Technical data
• Chipset: u-blox NEO-6P
• PPP (Precision Point Positioning)
• Hybrid chipset for GPS/SBAS (WAAS, EGNOS, MSAS)
• Integrated anti-jamming technology
• Integrated A-GPS technology with AssistNow online and AssistNow offline
• Built-in GPS patch antenna
• Reception frequency: GPS L1 1575.42 MHz
• Receiver sensitivity: -160 dBm
• Update rate: 1 Hz
• Positioning accuracy: SBAS + PPP < 1 m
• Auto baud rate up to 115,200 bps (default 38,400 bps)
• Central fastening thread with central cable
• Optional adapter cable to RS232 SUB-D9 or USB
• Cable length: 5.00 m
• Operating temperature: -20 °C ~ 65°C
• Dimensions (LxWxH): 62 mm x 21 mm
• Power supply: 5 V via PS/2 or USB
• Power consumption: 60 mA at 5 V
• Housing: IPX7 protection class
System requirements
• Windows 2000/XP/Vista/7/8/CE, Windows Mobile 4/5/6, Mac, Linux 2.4.x
• MD6 connection cable
Package contents
• GNSS receiver
• Stainless steel mounting hardware
NAVILOCK 62528 - GPS receiver/u-blox 8/serial MD6/roof mounting/10.00 m
135.02 EUR
GNSS Beidou Galileo Glonass GPS NL-8044P u-blox 8 serial MD6 roof mounting 10.00 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected. The NL-8044P GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 10 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62524 - GPS receiver/u-blox 8/USB/4.5 m
113.3 EUR
GNSS Beidou Galileo Glonass GPS NL-8012U u-blox 8 USB 4.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• USB specification 2.0
• Auto baud rate up to 115,200 bps
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 4.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62525 - GPS receiver/u-blox 8/serial MD6/1.50 m
108.04 EUR
GNSS Beidou Galileo Glonass GPS NL-8003P u-blox 8 serial MD6 1.50 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 1.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62526 - GPS receiver/u-blox 8/serial MD6/5.0 m
133.93 EUR
GNSS Beidou Galileo Glonass GPS NL-8003P u-blox 8 serial MD6 5.0 m NavilockThe MD6 serial Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The MD6 universal connector allows optional USB or serial cables to be connected.
Technical data
• Connection:
MD6 Navilock connector
(USB or serial connection cable available as an option)
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 1.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• MD6 connection cable
Package contents
• MD6 serial receiver
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62575 - GNSS GPS engine module/u-blox 8/USB
79.15 EUR
GNSS modules are fully assembled receivers with patch antenna, backup battery etc.. This version uses USB.Technical data
• Connection: WTB USB
• u-blox 8 UBX-M8030-KT chipset
• Frequencies:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602.5625 ~ 1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline,
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115200 bps
• PPS signal on pin 6
• Update Rate:
single GNSS: 18 Hz (e.g. GPS solo)
multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Sensitivity max. -167 dBm
• LED display for GPS status
• Operating temperature: -40°C ~ 85°C without battery
-20°C ~ 60°C with battery
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Dimensions (LxWxH): approx. 30 x 30 x 7.9 mm
System requirements
• device with internal USB interface
Package contents
• GNSS Engine Module
NAVILOCK 64311 - NL-802UC EVA-M8Q USB 2.0 Type-C™ Multi GNSS Receiver u-blox 8 1.
102.97 EUR
The USB 2.0 Multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. In combination with suitable hardware and appropriate navigation software, it enables precise positioning and navigation.Technical details
- Connector: 1 x USB 2.0 Type-C™ male
- Chipset: u-blox 8 EVA-M8Q
- Frequency:
BEIDOU: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
GPS: L1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz - Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- USB specification 2.0
- Auto Baud Rate up to 115200 bps
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)
multi GNSS: 10 Hz (e.g. GPS+BEIDOU) - Sensibility: max. -164 dBm
- Protection class: IPX6
- Magnetic, non-slip on the bottom
- LED-indicator for GPS status
- Operating temperature: -10 °C ~ 50 °C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 1.5 m
- Dimensions (LxWxH): ca. 65 x 45 x 22 mm
System requirements
- Linux Kernel 5.19 or above
- Windows 10/10-64/11
- Mac OS 14.5 or above
- PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port
Package content
- USB 2.0 receiver
Package
- Box
NAVILOCK 62531 - GPS receiver/u-blox 8/USB/roof mounting/4.50 m
123.64 EUR
GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mounting 4.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The NL-8004U GNSS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 4.5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 62532 - GPS receiver/u-blox 8/USB/roof mounting/4.50 m
144.27 EUR
GNSS Beidou Galileo Glonass GPS NL-8022MU u-blox 8 USB roof mounting marine 4.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software. The NL-8022MU GNSS receiver was specifically designed for mounting on white surfaces (boats, caravans, buses etc.). The white housing means it blends unobtrusively into the vehicle design.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX7 protection class
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 4.5 m
• Dimensions (Ø x H without thread): approx. 62 mm x 21 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• Mounting hardware: stainless steel nut and washer
• CD driver
• User manual on CD ROM Packaging• Box
NAVILOCK 61841 - NL-603P MD6 serial GPS receiver u-blox 6 1.5 m
108.09 EUR
The MD6 serial GPS Receiver based on u-blox 6 chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.Technical details
- Connector: MD6 Navilock plug (USB or serial cable are optional available)
- Chipset: u-blox 6 UBX-G6000-BT
- Frequency: GPS: L1, 1575.4200 MHz
- Accepts the signals of up to 50 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Baud rate: 9600 (up to 115200)
- Update rate: up to 5 Hz
- Sensibility max. -162 dBm
- IPX6 protection class
- Magnetic, non-slip on the bottom
- LED-indicator for GPS status
- Operating temperature: -20 °C ~ 60 °C
- Power supply: 5 V DC
- Current consumption: max. 80 mA
- Cold start in ca. 25 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 1.5 m
- Dimensions (LxWxH): ca. 65 x 45 x 22 mm
System requirements
- Windows 98SE/ME/2000/XP/Vista/7/8.1/10, Windows Mobile 2003/5/6, Mac OSX ,
Linux Kernel 2.6 - MD6 connection cable
Package content
- MD6 serial receiver
- Navilock support CD incl. driver and user manual
Package
- Retail Box
NAVILOCK 62781 - USB GNSS receiver, NL-802U EVA-M8Q, u-blox 8, 1.5 m
97.76 EUR
The USB 2.0 Multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. It is possible to use this Multi GNSS receiver with a laptop and suitable routing software for navigation.Technical details
- Connector: 1 x USB 2.0 Type-A male
- Chipset: u-blox 8 EVA-M8Q
- Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz - Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate up to 115200 bps
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)
multi GNSS: 10 Hz (e.g. GPS+GLONASS) - Sensibility: max. -164 dBm
- Protection class: IPX6
- Magnetic, non-slip on the bottom
- LED-indicator for GPS status
- Operating temperature: -10 °C ~ 50 °C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 1.5 m
- Dimensions (LxWxH): ca. 65 x 45 x 22 mm
System requirements
- Android 10.0 or above
- Chrome OS 90.0 or above
- Linux Kernel 5.8 or above
- Windows 10/10-64/11
Package content
- USB 2.0 receiver
Package
- Box
NAVILOCK 61843 - Navilock GPS receiver/u-blox 6/serial
92.54 EUR
The GPS receiver with the u-blox 6 SuperSence chipset receives WAAS and EGNOS data as well as GPS.The MD6 universal connector allows optional USB or serial cables to be connected. The NL-604P GPS receiver can be mounted on a range of vehicle roofs (cars, trucks, buses etc.) using the mounting hardware supplied. The shape of the housing means it blends unobtrusively into the vehicle design.
Technical data
- u-blox 6 GPS SuperSense® high-performance chip/marine design in white
- GPS receiver with MD6 Navilock connector (USB or serial cable available as an option)
- Internal patch antenna
- Central fastening thread with central cable
- Frequency: L1, 1575.42 MHz, C/A code: 1023 MHz
- Processes the signals from up to 50 satellites simultaneously
- Supports AssistNow offline (14 days of almanac data)
- Supports AGPS, WAAS, EGNOS and MSAS
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Baud rate: 9600 (configurable up to 115,200)
- Update rate: up to 5 Hz
- Max. sensitivity: –162 dBm
- Waterproof housing (IPX7)
- Operating temperature range: -20°C to +60°C
- Cold start in approx. 25 seconds
- Hot start in approx. 1 second
- Cable length: 5 m
- Positional accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Dimensions: 62 mm x 21 mm
System requirements
- Linux from Kernel 2.6
Mac
Windows 98SE/ME/2000/XP/Vista/7/8
Windows Mobile 2003/5/6
Android from V2.1 - MD6 connection cable
GOOD CONNECTIONS GC HUB-C002A - USB 3.0, 3-port hub, 1xA, 1x HDMI, 1x PD 94 W, USB-C cable
29.49 EUR
With the high-quality USB-C™ hub from Good Connections®, you can expand your device with three additional ports using a single USB-C™ connection. Not only can you charge your USB-C™ device with up to 96 watts in the shortest possible time, but you can also transfer data effortlessly and reliably at speeds of up to 5 Gbps. It also offers a first-class viewing experience on a connected monitor with 4K Ultra HD support. Its versatile functions, compact dimensions and low weight (approx. 38 grams) make it a must-have in your IT equipment, whether on your office PC or on your notebook when travelling.High-quality workmanship and elegant design
With its elegant and robust aluminium housing, the Good Connections® USB hub is always a reliable companion and a real eye-catcher. Selected, high-quality materials ensure a long service life, even with daily use.
Universal connectivity for increased productivity
In order to realise the slimmest possible housing design, many device manufacturers reduce the number of available ports or completely dispense with classic, rather large ports such as HDMI or DisplayPort. With the help of this USB hub, you can turn a single USB-C™ port into an HDMI output, a USB-A port (USB 3.0) and a USB Power Delivery port in a matter of seconds.
Easily connect your Mac, MacBook, computer, notebook, Chromebook or Surface to other devices such as an external monitor, input devices or storage media such as external hard drives or SD cards with the Good Connections® USB-C™ hub via plug-and-play.
Razor-sharp 4K Ultra HD video transmission
With its 4K Ultra HD video transmission, this USB-C™ hub delivers unrivalled image quality and is therefore perfect for video streaming, gaming or demanding office and graphics applications. Expand or mirror your display on an external screen.
USB Power Delivery 3.0 support - charging with up to 94 watts
The USB hub is equipped with a USB-C™ Power Delivery port and offers fast and efficient charging with a charging power of up to 94 watts - ideal even for powerful end devices. The prerequisite for this is that you connect a correspondingly powerful USB-C™ power supply unit. No power supply unit is required for normal operation of the hub. Please note that the USB PD port does not support data and video transmission.
Super-speed data transfer with up to 5 Gbit/s
Expand your device with a USB-A socket. With the super-speed USB 3.0 socket, you can transfer even large video files between different devices at up to 5 Gbit/s in the shortest possible time.
Technical specification:
- USB-C™ hub / multiport adapter / docking station
- Housing material: Aluminium
- Device connection: Via USB-C™ plug, cable length approx. 20 cm
- Connection 1: USB-C™ Power Delivery Port
- Connection 2: USB-A socket (USB 3.0)
- Connection 3: HDMI...
GRAUGEAR GG 18042 - 4-port USB 3.0 hub, 2x A, 2x C, 20-cm connection cable
26.47 EUR
- 4-port USB 3.0 hub with hot plug support
- 2x USB Type-C® ports with a data transfer rate of up to 5 Gbit/s
- 2x USB Type-A ports with a data transfer rate of up to 5 Gbit/s
- Integrated USB cable - length 20 cm
- Compact design in an aluminium housing - the ideal accessory for travelling
- Includes Type-C® adapter
- Supports Windows® and MacOS®
With this 4-port USB hub from GRAUGEAR you have a compact companion in an elegant aluminium housing at your disposal. With this handy hub, you can operate both your USB Type-A and USB Type-C® devices on the same end device, e.g. notebook, PC etc. When connecting this hub to your end device, you can choose to use the USB Type-A plug on the integrated connection cable or the Type-C® adapter supplied. The integrated 20-cm USB connection cable makes this hub the ideal travelling companion. A transmission rate of up to 5 Gbit/s can be achieved on all 4 USB ports, 2x Type-A + 2x Type-C®.
KENSINGTON KENS K39124EU - USB 3.0 4-port hub, 2x A, 2x C, USB-C connection cable
66.76 EUR
- The hub provides two USB-A ports and two USB-C ports so that you can easily connect other devices
- USB 3.1 Gen 1 technology for up to 5 GBit/s SuperSpeed data transfer and synchronisation (10 times faster than USB 2.0)
- Plug and play installation without drivers
- Thanks to its compact design, the hub is easy to carry with you
- Compatible with Windows 8.1 or later, MacOS 10 or later and Chrome OS 44 or later.
- The hub does not act as a power supply or offer DisplayPort mode switching
Two USB-A ports
Expand the productivity of your device by plugging conventional USB peripherals such as a mouse, keyboard or flash drive into one of these ports.
Two USB-C ports
Option to connect a USB-C device such as a smartphone or tablet, allowing the user to take full advantage of the limited ports available on host devices.
SuperSpeed data transfer
Thanks to USB 3.1 technology (1st generation), the hub supports transfer rates of up to 5 GBit/s (ten times faster than USB 2.0).
ICYBOX ICY IB-HUB1424C3 - USB 3.0 4-port hub, 4x A, USB-A/C connection cable
22.3 EUR
- Four times the efficiency with SuperSpeed: the four USB type A ports offer up to 5 Gbps transfer rate and ensure efficient data exchange. Whether external storage or peripherals, everything is connected quickly
- The stylish travel companion: the simple but elegant housing is robust and designed for use in the office, home office or when travelling. The slim design makes the hub portable and space-saving
- Universal connection with USB Combo cable: the bridge between new and old technology is the integrated USB type C and type A cable to ensure a universal connection for all devices
- Always informed with status LEDs: in addition to its compact and elegant design, the status LED provides clear and immediate feedback on the operating status
- Smooth workflow at 5 Gbps: boost your efficiency with USB 3.2 Gen1. Your hub offers an exceptional speed of 5 Gbps for fast file transfers and seamless productivity
VALUE 12991125 - USB 3.0 four-port hub, 2x USB-A, 2x USB-C, 10-m connection cable
99.93 EUR
The handy hub with 10-m long USB connection cable allows the connection of up to four USB peripherals at a greater distance from the PC. This means that the user is almost independent of the location of the devices to be connected (e.g. printers).- Extend the USB bus by another 10 metres
- A combined USB extension and hub
- Automatically determines the optimum transfer rate
- Powered via a supplied cable (DC power plug to USB-A) from a USB power supply unit
- 4x USB 3.2 Gen 1 ports (2x USB-A + 2x USB-C)
- Connections: 1x USB type A plug and 2x USB type A/2x USB type C sockets
- Plug & play, no additional drivers
- Enclosure dimensions: 52 x 52 x 14 mm
VALUE 12991124 - USB 3.0 four-port hub, 2x USB-A, 2x USB-C, 5-m connection cable
60.64 EUR
The handy hub with 5-m USB connection cable allows the connection of up to four USB peripherals at a greater distance from the PC. This means that the user is almost independent of the location of the devices to be connected (e.g. printers).- Extend the USB bus by another 5 metres
- A combined USB extension and hub
- Automatically determines the optimum transfer rate
- Powered via a supplied cable (DC power plug to USB-A) from a USB power supply unit
- 4x USB 3.2 Gen 1 ports (2x USB-A + 2x USB-C)
- Connections: 1x USB type A plug and 2x USB type A/2x USB type C sockets
- Plug & play, no additional drivers
- Enclosure dimensions: 52 x 52 x 14 mm
KENSINGTON KENS K39120EU - USB 2.0 four-port hub, USB-A connection cable
39 EUR
- Additional connectivity through four plug-and-play USB ports
- The integrated USB cable is always to hand!
- Power supply via the USB port eliminates the need for AC adapters and cable clutter
- Compact and lightweight, ideal for on the move
- Practical and quick to use thanks to plug and play, without any tedious installation
4-port hub
Expand your device's productivity potential by plugging your peripheral into one of the four additional USB 2.0 ports.
Plug-and-play operation
Simply connect the hub to your device and you can get started automatically without having to plug in a power supply or download a driver.
Universal compatibility
The adapter is compatible with devices running Windows XP or later and MacOS 10.6 or later.
RAPOO UCH-4003 - USB 3.0 4-port hub, 2x A, 2x C, USB-C connection cable
40.95 EUR
- Connect 2 USB-A devices and 2 USB-C devices
- Easy plug and play, no setup/driver required
- Reversible, ultra-thin USB-C connector design
- Durable aluminium housing
- Compact and portable
- Fast and reliable file transfer speed (5 Gbps)
- Compatible with all common operating systems
This practical Rapoo accessory is a must for anyone who wants to use their USB-A and USB-C devices on their USB-C notebook. The UCH-4003 allows you to add two USB-A ports and two more USB-C ports.
With its elegant yet robust exterior and aluminium housing, Rapoos UCH-4003 is designed to connect both mobile devices and laptops effortlessly. It also features the reversible, ultra-flat design of the USB-C connector, which offers additional convenience by eliminating the well-known problem of connector alignment or cable direction: Simply connect it any way around!
KENSINGTON KENS K39121EU - USB 3.0 four-port hub, USB-A connection cable
46.08 EUR
- Four USB 3.0 ports for easily connecting additional devices
- USB 3.0 technology for transfer rates up to 5 GBit/s (10 times faster than USB 2.0)
- Plug and play installation without drivers
- Compatible with devices running Windows XP or later and MacOS 10.6 or later.
Four-port hub
Expand your device's productivity potential by plugging your peripheral into one of the four additional USB 3.0 ports
High data transfer rates
Thanks to USB 3.0 technology, the hub supports transfer rates of up to 5GBit/s (ten times faster than USB 2.0)
Plug-and-play operation
Simply connect the hub to your device and you can get started automatically without having to plug in a power supply or download a driver.
Universal compatibility
The adapter is compatible with devices running Windows XP or later and MacOS 10.6 or later.
TRANSCEND TS-HUB2K - USB 3.0, 4-port hub, 4x USB-A, connection cable, black
30.52 EUR
- SuperSpeed USB 3.1 Gen 1 compliant and backwards compatible with USB 2.0
- Up to 10 times faster than USB 2.0
- No additional power adapters required
- Integrated USB cable
- Extremely slim and lightweight design
Transcend's SuperSpeed USB 3.1 Gen 1 hub is ideal for use with ultrabooks or ultra-thin and light laptops. The hub expands a single USB 3.1 Gen 1 port to a total of four slots to operate multiple devices simultaneously via the fast USB 3.1 Gen 1 interface. Because it is powered by the built-in cable, it does not require an additional power adapter. At the same time, its compact and lightweight design makes it the perfect companion when on the go.
RAPOO UCH-4002 - USB 3.0 4-port hub, 4x C, USB-C connection cable
40.95 EUR
- Connect 4 USB-C devices
- Easy plug and play, no setup/driver required
- Reversible, ultra-thin USB-C connector design
- Durable aluminium housing
- Compact and portable
- Fast and reliable file transfer speed (5 Gbps)
- Compatible with all major operating systems
This practical Rapoo accessory is a must-have for anyone who needs to use multiple USB-C devices on their USB-C notebook. The UCH-4002 allows you to add four USB-C ports and quickly connect up to 4 USB-C devices.
With its elegant yet robust exterior and aluminium housing, Rapoos UCH-4002 is designed to connect both mobile devices and laptops effortlessly. It also features the reversible, ultra-flat design of the USB-C connector, which offers additional convenience by eliminating the well-known problem of connector alignment or cable direction: Simply connect it any way around!
NAVILOCK 12669 - Nut for GNSS antenna, 15.875 mm, 10 pieces
66.75 EUR
This Nylon nut by Navilock is used to mount a GNSS receiver e.g. on a vehicle roof.Technical details
- Inner thread: 15.8750 mm (5/8'' - 11 UNC)
- Spanner width SW: 23.8125 mm (15/16'')
- Height: 9.5250 mm (3/8'')
- Material: Nylon
System requirements
- Navilock GNSS roofmount receiver
Package content
- 10 x Nylon nut
Package
- Zip poly bag
NAVILOCK 60650 - GNSS NaviLock NL-203AA
25.4 EUR
GNSS GALILEO GPS antenna NL-203AA SMA connector 5 m High Gain Navilock- external active additional antenna for GPS receiver
- internal patch antenna: 40 x 40 x 4 mm
- Frequency range: 1575.42 MHz +/- 1.02 MHz
- VSWR: 2.0 typ.
- Antenna gain: 5 dBi
- Polarization: RHCP
- LNA
- Antenna gain: 30 dB
- Input voltage: 3.0 ~ 5.0 V
- VSWR: 1.5 typ.
- Noise Figure: 1.5 @ 25°C +/- 10 °C
- Cable attenuation: 5.70 dB
- SMA connector
- Cable RG-174, 50 Ohm, 5 m long
- Dimensions 50.6 x 50.6 x 15.6 mm
- Magnetic base
- Current consumption: typ. 10 mA @ 5.0 V
- IPX-6
ZEBRA U42-S07PAR - Barcode scanner, wired, USB, straight, shielded, NT connection,
53.31 EUR
USB connection cable with power supply connector- USB
- Length: 2 m
- Straight
- Shielded
Suitable for:
- LI3608, LI3678, DS8178 and DS3678
NAVILOCK 64312 - NL-8002UC USB 2.0 Type-C™ Multi GNSS Receiver u-blox 8 1.5 m
128.81 EUR
The USB 2.0 Multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. In combination with suitable hardware and appropriate navigation software, it enables precise positioning and navigation.Technical details
- Connector: 1 x USB 2.0 Type-C™ male
- Chipset: u-blox 8 UBX-M8030-KT
- Frequency:
BEIDOU: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
GPS: L1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz - Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- USB specification 2.0
- Auto Baud Rate up to 115200 bps
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)
multi GNSS: 10 Hz (e.g. GPS+GLONASS) - Sensibility: max. -167 dBm
- Protection class: IPX6
- Magnetic, non-slip on the bottom
- LED-indicator for GPS status
- Operating temperature: -20 °C ~ 60 °C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 1.5 m
- Dimensions (LxWxH): ca. 65 x 45 x 22 mm
System requirements
- Linux Kernel 5.19 or above
- Windows 10/10-64/11
- Mac OS 14.5 or above
- PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port
Package content
- USB 2.0 receiver
Package
- Retail Box
LOGITECH BOLTUSB - Logi Bolt USB receiver
23.34 EUR
Use the Logi Bolt USB receiver to create a secure and powerful wireless connection between your mouse, keyboard or a set of both from Logi Bolt and your computer.Perfect as a replacement or for use with multiple computers
A practical replacement for the receiver supplied with your wireless Logi Bolt device. Use Logi Bolt to make a strong and secure wireless connection with two different computers. Use it to control multiple computers with your flow-enabled Logi Bolt mouse. These are just a few of the many good reasons to buy a Logi Bolt receiver.
Wireless - reliable and secure
Designed for security and high performance, Logi Bolt provides a strong and secure, non-interrupting connection with a range of up to 10 metres. The wireless range is dependent on the operating environment and computer configuration, even in environments with many wireless connections. Compatible with: Windows®, macOS, Linux®.
NAVILOCK 62576 - GNSS GPS engine module/u-blox 8/RS-232
97.8 EUR
GNSS modules are fully assembled receivers with a patch antenna, back-up battery, etc. This version uses the RS-232 serial interface.Technical data
• Connector: WTB serial RS-232
• u-blox 8 UBX-M8030-KT chipset
• Frequencies:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto baud rate up to 115,200 bps
• PPS signal at pin 6
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• LED display of GPS status
• Operating temperature: -40ºC ~ 85ºC without battery
-20°C ~ 60°C with battery
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Dimensions: (LxWxH): approx. 30 x 30 x 7.9 mm
System requirements
• Device with RS-232 serial interface
Package contents
• GNSS engine module
• Navilock support CD Packaging• Retail box
NAVILOCK 61840 - GPS/Galileo receiver u-blox 6
86.43 EUR
The USB 2.0 GPS receiver with the u-blox 6 SuperSense® chipset has a built-in active antenna.It can be used for navigation in conjunction with a notebook and the corresponding navigation software.
Technical data
• u-blox 6 GPS SuperSense® high-performance chip
• Frequency: L1, 1575.42 MHz, C/A code: 1023 MHz
• Processes the signals from up to 50 satellites simultaneously
• Supports AGPS, WAAS, EGNOS and MSAS
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• USB specification 2.0
• Auto baud rate up to 115,200
• Update rate: up to 5 Hz
• Max. sensitivity: –162 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C to +60°C
• Cold start in approx. 25 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Dimensions (LxWxH): 65 mm x 45 mm x 22 mm
• Cable length: 1.50 m
System requirements
• Windows XP/Vista/7/8, Linux from Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• CD driver
• User manual on CD ROM
NAVILOCK 62523 - GPS receiver/u-blox 8/USB/1.5 m
109.12 EUR
GNSS Beidou Galileo Glonass GPS NL-8002U u-blox 8 USB 1.50 m NavilockThe USB 2.0 Multi GNSS receiver with the u-blox 8 chipset has a built-in active antenna. It can be used for navigation in conjunction with a notebook and the corresponding navigation software.
Technical data
• Connection: USB 2.0 type A plug
• u-blox 8 UBX-M8030-KT chipset
• Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1: 1602.5625/1615.5000 MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO E1, 1575.4200 MHz
QZSS L1, 1575.4200 MHz
• Processes the signals from up to 72 satellites simultaneously
• Supports AssistNow online/offline
SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• USB specification 2.0
• Auto baud rate up to 115,200 bps
• Update rate:
Single GNSS: 18 Hz (e.g. GPS solo)
Multiple GNSS: 10 Hz (e.g. GPS+GLONASS)
• Max. sensitivity: -167 dBm
• IPX6 protection class
• Magnetic and non-slip housing base
• LED display of GPS status
• Operating temperature: -20°C ~ +60°C
• Cold start in approx. 26 seconds
• Hot start in approx. 1 second
• Positional accuracy: 2.5 m CEP (Circular Error Probable) and
2 m CEP with SBAS
• Cable length: approx. 1.5 m
• Dimensions: (LxWxH): approx. 65 x 45 x 22 mm
System requirements
• Windows Vista/7/8, Linux Kernel 2.6
• PC or notebook with a free USB port
Package contents
• USB 2.0 Receiver
• CD driver
• User manual on CD ROM Packaging• Retail box
CHERRY JK-1620GB - Keyboard, Mac, cable, USB-C, GB layout
61.58 EUR
Ultra-slim design keyboard with Mac layout and USB-C connection- Chiclet-style keyboard with Mac layout
- 1.8 m cable with USB-C connection
- Quick access to 13 frequently used Mac features
- Compact and slim enclosure
- Precise scissor mechanisms for an ideal typing experience
- High weight due to integrated metal plate
- Unusual design with shimmering blue key frame
- Durable key labels
- Numeric keypad for convenient numeric input
- Rubber feet for height adjustment for ergonomic typing
The CHERRY KC 6000C FOR MAC is a high-quality alternative to other Mac keyboards. The flat Mac keyboard is a great addition to the desktop in every way. The flat cable keyboard can be used on all end devices with a USB-C connection and operating system MAC OS X 10.13 and higher. For environmental reasons, the PC keyboard wins points for its plastic-free packaging.
Included in delivery
- User manual
- 4 self-adhesive rubber feet
- Keyboard
CHERRY JK-1620US - Keyboard, Mac, cable, USB-C, US layout
66.75 EUR
Ultra-slim design keyboard with Mac layout and USB-C connection- Chiclet-style keyboard with Mac layout
- 1.8 m cable with USB-C connection
- Quick access to 13 frequently used Mac features
- Compact and slim enclosure
- Precise scissor mechanisms for an ideal typing experience
- High weight due to integrated metal plate
- Unusual design with shimmering blue key frame
- Durable key labels
- Numeric keypad for convenient numeric input
- Rubber feet for height adjustment for ergonomic typing
The CHERRY KC 6000C FOR MAC is a high-quality alternative to other Mac keyboards. The flat Mac keyboard is a great addition to the desktop in every way. The flat cable keyboard can be used on all end devices with a USB-C connection and operating system MAC OS X 10.13 and higher. For environmental reasons, the PC keyboard wins points for its plastic-free packaging.
Included in delivery
- User manual
- 4 self-adhesive rubber feet
- Keyboard
ZEBRA S07ZAR - Barcode scanner, cable, USB
38.84 EUR
Connection cable- USB
- Length: 2.1 m
- Straight
- Cable code: U01
Suitable for:
Zebra LS2208 + LS3408
GRAUGEAR GG 18116 - USB 3.1 4-port hub, 2x A, 2x C, USB-C connection cable
27.47 EUR
- Four-port USB 3.1 expansion and hot plug support
- 2x USB Type-C® with a data transfer rate of up to 10 Gbps
- 2x USB Type-A with a data transfer rate of up to 10 Gbps
- Integrated USB cable - length 20 cm
- Compact design in aluminium housing
- Ports: USB-C + USB-A
It's all in the combination
With this 4-port USB-HUB from Graugear, you have a compact companion in an elegant aluminium housing at your disposal, on which you can operate your USB-Type A, as well as USB-Type-C® devices on your devices such as a laptop, PC, etc.
Even when connecting the G-HUB2C2A-10G, you have the choice to operate it either on USB Type-A or Type-C®.
The integrated 20-cm USB connection cable ensures ''freedom of movement''. A transmission rate of up to 10 Gbps can be achieved on all 4 USB ports, 2x Type-A + 2x Type-C®.