METZ CONNECT BTR 1309107003-E - REGplus IP20 E-DAT modul
35.74 EUR
Explore the detailed sheet rich in complete information, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations, equipped with individual E-DAT modul RJ45 module and cable feed 45° from the top.
Plug direction is 45° downwards. Easy and fast insertion of wire pairs in E-DAT modul stuffer cap. A width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels. When mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal.
A cover protects the module against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed. In this case, it is necessary to remove the equipotential bonding spring.
Integrated dust protection cover are also available colored.
EAN: 4250184136569
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations, equipped with individual E-DAT modul RJ45 module and cable feed 45° from the top.
Plug direction is 45° downwards. Easy and fast insertion of wire pairs in E-DAT modul stuffer cap. A width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels. When mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal.
A cover protects the module against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed. In this case, it is necessary to remove the equipotential bonding spring.
Integrated dust protection cover are also available colored.
EAN: 4250184136569
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
METZ CONNECT BTR 1309A07003-E - REGplus IP20 E-DAT modul, coupling, 180°
32.64 EUR
REGplus IP20 E-DAT module 180° couplingConnector unit for mounting on DIN rail TH35 according to DIN EN 60715 in electrical distribution boards for house and industrial installation
- equipped with one E-DAT modul RJ45 coupler
- mating direction inclined 45° downwards
- compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
- suitable for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
- the width of 1HP allows the installation of up to 12 REGplus in standard electrical distributors
When installed as a protection class I device, equipotential bonding takes place via a switchable integrated equipotential bonding spring directly via the mounting rail, which is to be connected to the building equipotential bonding via corresponding contacting terminals
METZ CONNECT BTR 1309428103-E - REGplus IP20 Keystone, light grey, unassembled
23.34 EUR
Keystone REGplus IP20 light gray unassembledConnector unit unpopulated for mounting on DIN rail TH35 according to DIN EN 60715
- for one single module in keystone design
- cable access variable 45° from top or bottom possible, plug-in direction 45° inclined downwards
- the width of 1HP allows the installation of up to 12 REGs in standard electrical distribution boards
- when installed as a device of protection class I, the potential equalization is carried out directly via the mounting rail by means of an integrated potential equalization plate. The mounting rail must be integrated into the building equipotential bonding system using appropriate measures.
- The device is protected against direct contact by a cover. Protection class II is therefore maintained when the device is installed in a distribution board with protective insulation. The equipotential bonding plate must be removed for this purpose.
- integrated dust protection flap (also available in color)
- suitable modules for cable access 45° from above: C6Amodul K 180°, E-DAT modul coupler 180°, UTP modul Cat.5e and Cat.6, suitable modules for cable access 45° from below: C6Amodul K 270°
ATTENTION
Not suitable for modules in modular design and C6Amodul K 90°!
METZ CONNECT BTR 1309430003-E - E-DAT modul IP44 surface mounting housing unequipped
40.91 EUR
- IP44 flat surface-mounted housing for two individual modules in Modul design
- IP44 protection only when closed (without plugged in patch cable)
- cable feed for one or two cables from the top
- break-proof
- gray color
METZ CONNECT BTR 1309121102-E - E-DAT modul 2 port UPk Cat.6A pure white RAL9010
32.64 EUR
Termination unit with E-DAT modul for mounting in cable duct. Module plug direction 45° downwards. Strain relief with cable tie at the module.
With label window for identification labels (labels included in the delivery) and integrated dust protection covers (also colored).
Compatible with ''design'' central units of switch lines. Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 1309A1-I - E-DAT modul coupler 8(8) 90° Cat.6
24.37 EUR
RJ45 cable coupler Cat.6 class EA. Fully shielded 90° coupler made of refined zinc die-casting.
Especially suitable for consolidation points and cross-connect cabling.
2 mounting versions in a coupler fits in module or keystone applications.
Suitable applications: module wall outlets, keystone wall outlets, module face plates, keystone face plates, Modul REG IP20, Keystone REG IP20, Industry built in flange EBM, Industry built in flange EBK.
METZ CONNECT BTR 130921-E - 19 inch module rack, 1RU, 24 port E-DAT, stainless steel, Cat.6a
257.97 EUR
E-DAT modul 24x8(8) 1U patch panel Cat.6A, stainless steel19 inch 1U stainless steel module rack with 24 E-DAT modul single modules
- tested: Link up to 500 MHz
- suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
- easy-to-install connection of the 2- to 4-pair data cable AWG 26/1 - 22/1 and stranded conductor with 7-wire copper wire AWG 26/7 - 22/7 to BTR 8-way IDC cutting terminals
- marking of the wire assignment T568A or T568B
- integrated cable support, additional strain relief possible
- ground bolt M6 x 10 with nut and toothed lock washer
- incl. 30 cm grounding cable
- all fully shielded modules connected by grounding bar
- Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008)
- Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
METZ CONNECT BTR 1307370002-I - E-DAT C6 1 port AP pure white RAL9010
42.66 EUR
Surface-mounted termination unit with one 8-pole RJ45 jack. Screwing of the strain relief cover and shield connection from the front.
Practical cable feed from 8 sides.
With label window for enclosed identification labels and integrated dust protection covers (also colored).
METZ CONNECT BTR 130C381200-I - E-DAT C6A 2 port UP0
29.54 EUR
Termination unit with two 8-pole RJ45 jacks for mounting in cable duct. Ergonomically shaped LSA terminal block optimized for HF technology.
Screwing of the strain relief cover and shield connection from the front.
Practical cable feed from 8 sides.
Plug direction 45° downwards. Compatible with ''design'' central units of switch lines.
Suitable for mounting in standard flush-mounted and cavity wall casings.
METZ CONNECT BTR 1307380002-I - E-DAT C6 2 port AP pure white RAL9010
42.97 EUR
Surface-mounted termination unit with two 8-pole RJ45 jacks. Screwing of the strain relief cover and shield connection from the front.
Practical cable feed from 8 sides.
With label window for enclosed identification labels and integrated dust protection covers (also colored).
METZ CONNECT BTR 1309151002-E - Modul wall outlet UP 2 port unequipped pure white
16.1 EUR
Flush-mounted termination unit for individual modules in Modul design. Module plug direction 45° downwards. Strain relief on module.
With label window for enclosed identification labels and integrated dust protection covers (also colored).
Compatible with ''design'' central units of switch lines.
METZ CONNECT BTR 130861-1202E - Modul AP-housing 12 port pure white RAL9010
61.62 EUR
Surface-mounted, unequipped module housing for individual modules in modul design. Solid steel sheet housing, upper part of the housing powder-coated in RAL 9010. Upper part of the housing can be put on and removed easily because no screws are used for fastening.
Equipotential bonding possible by means of contact pin. Additional strain relief on lower part of housing using cable ties. Suitable for direct wall mounting, as desktop device and for DIN-rail mounting using the DIN rail adapter mini FS.
Optionally available and fits in all housings: FO extension set for module and keystone surface mount housing: 130861-MSK-E.
METZ CONNECT BTR 130861-2402E - Modul AP-housing 2x12 port pure white RAL9010
108.09 EUR
Surface-mounted, unequipped module housing for individual modules in modul design. Solid steel sheet housing, upper part of the housing powder-coated in RAL 9010. Upper part of the housing can be put on and removed easily because no screws are used for fastening. Equipotential bonding possible by means of contact pin.
Additional strain relief on lower part of housing using cable ties. Suitable for direct wall mounting, as desktop device and for DIN-rail mounting using the DIN rail adapter mini FS.
Optionally available: FO extension set for module and keystone surface mount housing: 130861-MSK-E. Optionally available 2 x 12 housing: Strain relief for patch cords 130861-24ZE-E.
METZ CONNECT BTR 130B10D20002 - Modul junction box, surface mount, 2 port, bare, pure white, 43
23.34 EUR
Module junction box surface mount 2 port unequipped pure white 43 mmSurface mount junction box 85 x 85 x 43 mm for all single modules in modular design
- plug-in direction of the module inclined 45° downwards
- strain relief at the module
- with viewing window for enclosed labeling insert
- labeling sheet 209 x 294 mm
- integrated dust protection flaps
- cover parts pure white RAL 9010, surface matt structured
METZ CONNECT BTR 1309460003-I - Modul IP44SG AP-housing gray RAL7035 unequipped
97.76 EUR
Lockable flush-mounted IP44 outlet, keyed alike with two keys (identical locks and keys). Cover closes completely, even when patch cables are plugged in. For two individual modules in Modul design (not suitable for OpDAT modules).
Ball-impact resistant according to DIN 18032. Can be operated with standard patch cables. With clearly visible label window.
Bottom section of housing can be turned 180°, with cable feed possible from top and bottom. With space to install the required spare cable lengths.
METZ CONNECT BTR 1309120002-E - E-DAT modul 2 port AP Cat.6A pure white RAL9010
36.77 EUR
Surface-mounted termination unit with E-DAT modul. Module plug direction 45° downwards.
Strain relief with cable tie at the module.
With label window for enclosed identification labels and integrated dust protection covers (also colored).
METZ CONNECT BTR 1309130002-E - CAT.6A module 3 port AP pure white
46.08 EUR
E-DAT module 3 port AP Cat.6A, pure whiteSurface mount termination unit with E-DAT module
- Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
- Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
- Tested: Link up to 500 MHz
- Suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
- Easy to install connection of 2- to 4-pair data cable AWG 26/1 - 22/1 and stranded conductor with 7-wire copper wire AWG 26/7 - 22/7 to BTR 8-way IDC cutting terminals
- Identification of the wire assignment T568A or T568B
- Mating direction of the module 45° tilted down
- Tongue relief with cable tie on the module
- With viewing window for enclosed labeling insert
- See accessories for 209 x 294 mm labeling sheet
- integrated dust protection flaps (also available in color)
- Color of cover parts pearl white RAL 1013 or pure white RAL 9010, surface matt textured
- Variants: 1 port, 2 port, 3 port
- Color variants: pure white and pearl white
METZ CONNECT BTR 150240C20610 - OpDAT REGplus, 6xSC-D MM (ceramic), 1xM20, with crimp splice hol
149.49 EUR
OpDAT REGplus 6xSC-D MM (ceramic), 1xM20, with crimp splice holdersplice distributor for mounting rail TH35
- equipped with SC-D (MM) couplers made of zinc die casting
- ceramic guide sleeve slotted for multimode applications
- with fiber reservoir
- freely inscribable labeling strip
- different installation variants on the mounting rail possible
- splice tray with crimp splice holder
- front panel can be removed as a whole
- cable entry from top or bottom, straight or angled, with M20 gland (up to 2 possible)
- Insertion of pre-assembled cables possible
- One M20 cable entry with strain relief included in delivery
- Fixing of the housing cover via only one captive screw
- Free coupling recesses equipped with special blind covers
METZ CONNECT BTR 1502577506-E - OpDAT 19 inch, 1U fiber patch panel, 6x LC-D, violet, OM4
175.32 EUR
OpDAT fix patch panel splice 6xLC-D (violet), OM4, gray19 inch, 1U fiber patch panel for fixed installation
- equipped with LC-D couplers and LC pigtails
- pigtails with compact core ø 0.9 mm, 12 colors, secondary and primary coating same color, length 2.0 m
- Pigtails inserted and set down in standard splice cassette with crimp splice holders
- pigtails cleaned and inserted into couplers
- lightweight aluminum construction with sheet steel front plate
- unused knockouts closed with blind plugs
- removable front panel for easy adapter mounting
- service-friendly, screwed cover
- several cable entry options at the rear (mounting with PG13.5, PG16 and PG21 or M20 and M25)
- one cable entry PG16 is enclosed
METZ CONNECT BTR 130894-0229E - Cable manager 19 inch 1RU 100 mm black RAL9005
82.25 EUR
19 inch 1RU distribution panel for horizontal organization of the patch cables. Especially suitable for fiber optic patch cables.
5 black plastic cable brackets with large contact surfaces.
Easy mounting of the cable brackets by twisting.
Available as option: plug-mounted nomenclature strip.
METZ CONNECT BTR 1502597406-E - OpDAT 19 inch, 1RU fiber patch panel, 6x LC-D, blue, OS2
164.94 EUR
OpDAT fix patch panel splice 6xLC-D (blue), OS2, gray19 inch, 1U fiber patch panel for fixed installation
- equipped with LC-D couplers and LC pigtails
- pigtails with compact core ø 0.9 mm, 12 colors, secondary and primary coating same color, length 2.0 m
- Pigtails inserted and set down in standard splice cassette with crimp splice holders
- pigtails cleaned and inserted into couplers
- lightweight aluminum construction with sheet steel front plate
- unused knockouts closed with blind plugs
- removable front panel for easy adapter mounting
- service-friendly, screwed cover
- several cable entry options at the rear (mounting with PG13.5, PG16 and PG21 or M20 and M25)
- one cable entry PG16 is enclosed
METZ CONNECT BTR 1309131101-E - E-DAT modul 3 port UPk Cat.6A pearl white RAL1013
30.61 EUR
Termination unit with E-DAT modul for mounting in cable duct. Module plug direction 45° downwards. Strain relief with cable tie at the module.
With abel window for identification labels (labels included in the delivery) and integrated dust protection covers (also colored).
Compatible with ''design'' central units of switch lines (note: 3 port central units at present only available from JUNG). Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 1309121200-E - E-DAT modul 2 port UP0 Cat.6A
30.57 EUR
Termination unit with E-DAT modul for mounting in cable duct. Module plug direction 45° downwards.
Strain relief with cable tie at the module.
Compatible with InchesdesignInches central units of switch lines. Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 1309110002-E - E-DAT modul 1 port AP Cat.6A pure white RAL9010
30.57 EUR
Surface-mounted termination unit with E-DAT modul. Module plug direction 45° downwards.
Strain relief with cable tie at the module.
With label window for enclosed identification labels und integrated dust protection covers (also colored).
METZ CONNECT BTR 130855-E - E-DAT C6 24 port patch panel 1RU LSA Cat.6
190.78 EUR
19 inch 1RU frame made of silver anodized aluminum with 24 individually shielded RJ45 jacks. Wire pairs can be led to the LSA terminal without untwisting the pair.
Connection of 2 to 4-pair data lines to LSA insulation displacement connectors (AWG 22-24) conductor colors marking to T568A.
Optional strain relief using cable ties.
Modules are connected by means of grounding rail.
METZ CONNECT BTR 1309121002-E - E-DAT modul 2 port UP Cat.6A pure white RAL9010
32.64 EUR
Flush-mounted termination unit with E-DAT modul. Module plug direction 45° downwards. Strain relief with cable tie at the module.
With label window for identification labels (labels included in the delivery) and integrated dust protection covers (also colored).
Compatible with ''design'' central units of switch lines. Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 1309131102-E - E-DAT modul 3 port UPk Cat.6A pure white RAL9010
37.81 EUR
Termination unit with E-DAT modul for mounting in cable duct. Module plug direction 45° downwards. Strain relief with cable tie at the module.
With abel window for identification labels (labels included in the delivery) and integrated dust protection covers (also colored).
Compatible with ''design'' central units of switch lines (note: 3 port central units at present only available from JUNG). Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 130855C-E - E-DAT C6A 24 port patch panel 1RU LSA
195.95 EUR
19 inch 1RU frame made of silver anodized aluminum with 24 individually shielded RJ45 jacks. Wire pairs can be led to the LSA terminal without untwisting the pair.
Conductor colors marking to T568A.
METZ CONNECT BTR 1309111200-E - E-DAT modul 1 port UP0 Cat.6A
24.37 EUR
Termination unit with E-DAT modul for mounting in cable duct. Module plug direction 45° downwards.
Strain relief with cable tie at the module. Compatible with ''design'' central units of switch lines.
Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 130C370002-I - CAT.6A module 1 port AP pure white
30.57 EUR
E-DAT C6A 1 port AP pure whiteSurface mount termination unit with one or two 8-pin RJ45 jacks
- Cat.6A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
- Compliance with class EA up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
- Tested: Component up to 600 MHz, Link up to 800 MHz
- suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
- HF-optimized and ergonomically shaped LSA terminal block
- Screwing of the flap for strain relief and shield removal is done from the front
- Connection of data lines AWG26/1 - 22/1 (single-wire)
- Mating direction 45° downward inclined
- With viewing window for enclosed labeling insert
- Labeling sheet 209 x 294 mm see accessories
- Integrated dust protection flaps (also available in color)
- Cover parts pure white RAL 9010 or pearl white RAL 1013
- Variants: 1 port pure white, 1 port pearl white, 2 port pure white, 2 port pearl white
METZ CONNECT BTR 1309131002-E - E-DAT modul 3 port UP Cat.6A pure white RAL9010
38.84 EUR
Flush-mounted termination unit with E-DAT modul. Module plug direction 45° downwards. Strain relief with cable tie at the module.
With label window for identification labels (labels included in the delivery) and integrated dust protection covers (also colored).
Compatible with ''design'' central units of switch lines (note: 3 port central units at present only available from JUNG). Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 1309111102-E - E-DAT modul 1 port UPk Cat.6A pure white RAL9010
24.37 EUR
Termination unit with E-DAT modul for mounting in cable duct. Module plug direction 45° downwards. Strain relief with cable tie at the module.
With label window for identification labels (labels included in the delivery) and integrated dust protection covers (also colored).
Compatible with ''design'' central units of switch lines. Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 1309450003-E - E-DAT module housing, IP20, surface mount
48.14 EUR
E-DAT modul IP20 surface mount housingIP20 surface mount housing for two single modules in modular design
- Identical to module IP44 AP, but due to opening in the housing cover it remains closed when patch cables are plugged in
- cable feed for one or two cables from above
- unbreakable
- Color gray
METZ CONNECT BTR 1309427103-E - Modul REGplus IP20 unequipped light gray RAL7035
23.34 EUR
Unequipped termination unit for mounting on TH35 rail for one individual module in Modul design. Variable cable feed 45° from the top or bottom, plug direction 45° downwards. A width of 1HP allows mounting up to 12 REG in standard electrical distribution panels.
When mounted as a device of protection class I, the equipotential bonding is realized directly over the rail by means of an integrated equipotential plate.
Special measures have to be taken to integrate the rail in the equipotential bonding of the building.
A cover protects the device against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed.
In this case, it is necessary to remove the equipotential bonding plate. Integrated dust protection cover are also available colored.
METZ CONNECT BTR 1309111002-E - E-DAT modul 1 port UP Cat.6A pure white RAL9010
25.4 EUR
Flush-mounted termination unit with E-DAT modul. Module plug direction 45° downwards. Strain relief with cable tie at the module.
With label window for identification labels and integrated dust protection covers (also colored).
Compatible with ''design'' central units of switch lines. Not suitable for mounting in standard flush-mounted or cavity wall casings.
METZ CONNECT BTR 150250B224-E - OpDAT fix 1RU 24xSC-D MM VIK/24 adap/beige/Ph-Br
175.28 EUR
19 inch 1RU fiber optic patch panel for fixed installation. Light aluminum construction with steel sheet front plate painted in RAL 7035 equipped with SC-D adapters. Unoccupied recesses are closed with blind plugs.
The removable front plate allows an easy adapter mounting. Screwed on cover for easy access during service work. Several possibilities for cable entry on the back (fastening with PG13.5, PG16 and PG21 or M20 and M25) are available.
Toolless fastening of pre-assembled installation cables (OpDAT VIK) in a U-shaped cutout.
METZ CONNECT BTR 130927-2400E - 19 inch module rack, 24 port, MC module, SmartConnect patch pane
87.42 EUR
SmartConnect patch panel 24 port MC moduleModule holder empty for data, KOAX and fiber optic modules
- mounting type: module
- Mounting on top hat rail (TH35) or screwable on mounting frame or mounting plate
- 3-part: Consisting of 1 module holder made of bent sheet metal and 2 milled plastic holders universal
- Mounting of the plastic holders on top-hat rail and perforated plate
- Functional potential equalization according to DIN EN 50310 (VDE0800-2-310) with 2 screw fastenings possible via grounding screw M6x10 with nut and toothed lock washer
- 1 labeling strip on module holder
METZ CONNECT BTR 130910KI - E-DAT modul Cat.6A K jack - Keystone style
22.25 EUR
- modular termination unit Cat.6A, RJ45
- component testing for Cat.6A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT
- compliance with class EA to ISO/IEC 11801
- Ed.2.2:2011-06, DIN EN 50173-1:2011-09
- tested: Link up to 500 MHz
- suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
- easy to install connection of 2 to 4 pair data cables
- AWG 26/1 to 22/1 (solid wire) and stranded wires with 7 copper conductors AWG 26/7 to 22/7 to insulation displacement connectors (IDC)
- marking of conductor assignment to T568A and T568B
- easy and fast insertion of wire pairs in E-DAT modul stuffer cap
- module housing made of refined zinc die-casting
- mounting without special tools
- strain relief with cable tie at the module
- mounting version: Keystone
- cable feed 180°
METZ CONNECT BTR 1401400810-I - E-DAT Industry Cat.6 RJ45 field plug insert
26.44 EUR
E-DAT Industry RJ45 field plug insert Cat.6 class EAField attachable Cat.6 class EA plug for installation in plug housing IP67 of variants 1, 4, 5, and 14
- Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
- suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
- 8-wire field-wireable RJ45 connector for AWG 22
- connection of AWG 26/7 - 22/7, AWG 26/1 - 22/1 possible
- solid wire Cu conductor diameter 0.4 - 0.64 mm
- Stranded copper conductor diameter 0.48 - 0.76 mm
- Core diameter up to 1.6 mm
- cable sheath from 5,5 to 8,5 mm
- consists of only 2 parts
- easy to assemble - can be connected without special tools
- industrial zinc die-cast housing
- can be used as test plug on the IP67 side of variants 1, 4, 5, 6 and 14
METZ CONNECT BTR 130920-BK-E - 19 inch module rack, 1RU, 24 port, black, unassembled, shielded
71.92 EUR
Module 19 inch module rack 1U 24 port black unassembled, shielded19 inch 1U module rack for 24 single modules in modular design
- module carrier front made of black anodized aluminum
- module holder made of plastic with dust protection flaps removable to the front
- integrated cable catch, additional strain relief possible
- viewing window for labeling insert
- labeling sheet 210 x 297 mm see accessories
- grounding bolt M6 x 10 with nut and toothed lock washer
- incl. 30 cm grounding cable
- all fully shielded modules connected by means of grounding bar