Review Lcs ps112 longshine print server 3 ports usb parallel

LCS-6322 - Longshine PCI Express X1 - 2 x serial, 1 x parallel 40.33 EUR The LCS-6322M is an I/O controller card for the PCIe slot with a parallel printer port and two serial ports. Today's mainboards have ever fewer serial or parallel ports. This card series enables you to simply retrofit the required ports. The card can be used for printers, machine control or other devices.

General
• Low power consumption
• Selectable reception trigger level
• Programmable baud rate generator
• Supports modem control signals
• 5, 6, 7 & 8-bit character
• Allows Even, Odd, No Parity or Force Parity settings
• Supports Status Report
• Compatible with 16C550
• Built-in 16C550-compatible UART with 16 bytes
• Re-Map function for legacy ports
• Supported operating systems: Windows 2000/XP/Vista/W7/W8/W8.1/W2008/W2012, Linux, MAC10.X, DOS

Specifications
• Standard: PCI Express Base Specification 1.0a
• Chipset: Moschip MCS9901
• Bus: PCI-Express X1
• Connections:
· 2 x 9-pin serial connectors, male
· 1 x 25-pin parallel port connector, female
• Data rate:
· Serial port: up to 230,400 bit/s
· Parallel port: up to 1.5 Mbit/s
• Buffer: 16-byte FIFO (send & receive), 16-byte FIFO (parallel port)
• Certificates: FCC, CE
• Operating temperature: 0°C to +70°C

Included with delivery
• PCIe card
• Bracket with serial ports
• CD driver
• User manual

SEE OFFER SEE OFFER ebay

LCS-6320 - Longshine PCI Express X1 - 2 x parallel 41.98 EUR The LCS-6320 is an I/O controller card for the PCI express slot with a parallel printer port. Today's mainboards have ever fewer serial or parallel ports. This card enables you to simply retrofit the required parallel ports.

General
• Low power consumption
• Multi-mode compatible controller (SPP, PS2, EPP, ECP)
• Re-Map function for legacy ports
• Supported operating systems: Windows 2000/XP/Server 2003

Specifications
• Standard: PCI Express Base Specification 1.0a
• Chipset: NetMos MCS9835CV
• Connection/bus: PCI-Express X1
• Ports: 2 x 25-pin parallel port connector, female.
• Data rates: up to 1.5 Mbit/s
• Buffer: 16-byte FIFO (parallel port)
• Operating temperature: 0°C to +70°C

Included with delivery
• PCIe card
• Slot bracket with 1 x 25-pin parallel port connection
• CD driver
• Manual

SEE OFFER SEE OFFER ebay

LCS PS110 - Longshine print server, 1 port, parallel 56.45 EUR Longshine LCS-PS110

1 port parallel print server
1 x parallel port
1 x RJ-45 10/100 Mbit/s port
SMB

The LCS-PS110 parallel port print server makes your printer available to every PC in the entire network. The multi-protocol print server supports the most popular network protocols and operating systems. It features network management for easy configuration and administration
through SNMP, extensive configuration and management software and a web user interface.
Characteristics:
. Windows-based setup software
. Web interface for set-up and management
. Supports SNMP
. Supports HP Web JetAdmin
. Supports Rendezvous function
. Supports DHCP
. Supports email alarm
. Supports Windows print monitor technology
. Supports Internet Printing Protocol (IPP)
. Supports print job control/print job status
. Supports firmware update via TFTP
. Supported operating systems: Windows 95/98/98SE/ME/NT/W2K/XP, Mac OS 8.1 or higher,
Linux/Unix, NetWare (Bindery/NDS)
Specifications:
Standard: IEEE 802.3, IEEE 802.3u
Chip: Winbond W90N740CD
Flash memory: 1 MB
System memory: 2 MB SDRAM
LAN connection: 1 x RJ-45 10/100 Mbps, auto-sensing
Printer port: parallel port, DB 36-pin male Centronics, bi-directional communication
Protocol: TCP/IP, IPX, Netbeui, AppleTalk, LPR, SMB over IP*
Certificates: CE, FCC Class B
Work environment: 0° ~ 50° temperature
0% ~ 70% humidity
Dimensions: 56 x 52 x 22 mm, 42 g
Power supply unit: external power supply unit 3.3 V/2 A
Package contents: PS110, power supply unit, CD with drivers/software, user manual

SEE OFFER SEE OFFER ebay

LCS PS101-2 - Longshine print server USB 2.0 61.62 EUR Longshine LCS-PS101-2

The LCS-PS101-2 is a small, handy print server for printers with a USB connection.
The print server makes it easy to connect inkjet, ink, laser or
dot matrix printers to networks with up to 10 or 100 Mbit/s.
The LCS PS is easy to configure and manage via a web interface.
It is the ideal device for flexible use of printers in home environments, as well as smaller to medium sized offices.

Characteristics:
• Windows-based setup program, Web Management, Telnet, HP JetAdmin
• Supports DHCP (client)
• Supports Internet Printing Protocol (IPP)
• Supports SNMP
• Supports firmware upgrade (TFTP)
• Built-in Flash RAM
• Built-in SDRAM
• LED for quick diagnostics

Specifications:
• Standards: IEEE 802.3 and 802.3u
• Chipset: RDC R2886
• Protocols: TCP/IP, IPX, Net BEUI, Apple Talk, LPR, SMB over TCP/IP

Supported operating systems:
Windows 9x/Me/NT/2000/XP/Vista, Mac OS 6.0 and higher, UNIX/Linux, NetWare 3.12 and higher (Bindery/NDS)

Connections:
• 1 x RJ-45 with 10/100 Mbit/s
• 1 x USB 2.0 standard
• Flash RAM: 1 MB
• SDRAM: 2 MB
• Power supply unit: external power supply unit 3.3 V/2 A
• Dimensions: 73.16 x 64.75 x 28.39 mm, 56 g
• Scope of delivery: user manual, CD with software and multilingual guide

SEE OFFER SEE OFFER ebay

LCS-MGBIC-SX - Longshine mini-GBIC module, 1 port, for LCS-C862 57.29 EUR Longshine LCS-MGBIC-SX

Mini-GBIC module, 1 port
• LC port
• Multimode 850 nm (SFP)
• 1.125 Gb/s
• 3.3 V
• For switches and converters with SFP ports

• You can find suitable cables with LC connections in our delivery programme
• For additional technical details, please refer to the detailed data sheet
• Not compatible with HP/Cisco

SEE OFFER SEE OFFER ebay

LC POWER LC-HUB-C-M-7-M2 - USB 3.0 5-port hub and external M.2 NVME enclosure 61.58 EUR Advanced connectivity and storage options in one device

The LC-HUB-C-MULTI-7-M2 is an innovative external USB-C hub and M.2 enclosure that significantly expands the connectivity of your computer or notebook. This hub accommodates one M.2 SSD (NVMe/SATA) and allows you to connect one USB-C and two USB-A peripherals.

In addition, it has a powerful USB-C-PD port of up to 100 W and an HDMI port for output of 4K UHD content.

2x USB-A (USB 3.2 Gen. 1x1 (5 Gb/s))
1x USB-C (USB 3.2 Gen. 1x1 (5 Gb/s))
1x USB-C-PD (PD 100 W)
1x HDMI up to 4K UHD (3840 x 2160 @ 60 Hz)
For one NVMe- or SATA-M.2-SSD:

Tool-free assembly
Power and data access LEDs
Aluminium alloy
Plug and play

Advanced storage capabilities

A notable feature of the LC-HUB-C-MULTI-7-M2 is its integrated M.2 SSD enclosure, which accommodates NVMe or SATA M.2 SSDs. These enable fast data transfer rates of up to 10 GB/s.

SEE OFFER SEE OFFER ebay

LC POWER LC-HUB-U3-4-C - USB 3.0 5-port hub, 2x USB-A, 2x USB-C, 1x USB-C power 22.87 EUR Expand your connections

The LC-HUB-U3-4-C allows you to seamlessly connect two USB-A and two USB-C peripherals to your computer or notebook. This hub supports the USB 3.2 Gen 2x1 interface, which ensures fast data transfer of 10 GB/s and is backwards compatible with USB 3.2 Gen 1x1, 3.1, 2.0 and 1.1. The hub also features an additional USB-C port for stable power supply (5 V, 2.5 A). Simple plug-and-play installation requires no software drivers, and the LED status indicator keeps you informed of the connection status.

USB 3.2 Gen 2x1 data transfer of up to 10 Gb/s
2x USB-A ports
2x USB-C ports
Plug and play
LED status indicator

Super-fast speed

This modern interface provides fast transfer speeds that move your data up to 10 Gb/s. Whether it's massive 4K videos or large project files. Enjoy super-fast data transfer and take your productivity to the highest level. Pure performance and robust design that inspire!

SEE OFFER SEE OFFER ebay

DIGITUS DN130011 - Device server, 1x RJ45, 1x DB-36 parallel 82.25 EUR Parallel Print Server, 1-port 1x RJ45, 1x DB-36-pin male Centronics

Thanks to the parallel port, older printers can be integrated into the network
Automatic detection of the data transfer speed
Automatic detection of data transfer speed

Parallel Print Server, 1-port, 1x RJ45, 1x DB-36-pin male Centronics

Technical details

Compatible with IEEE 802.3, IEEE 802.3u Ethernet standards
Provides a parallel port to connect the printer
Supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk network protocols
Supports LPR, RAW, IPP and SMB print protocols
Supports peer-to-peer printing (TCP/IP/IPX/NetBEUI/AppleTalk)
Supports server-based printing (Novell NetWare and Windows)
Supports DHCP server and client protocols
Supports web-based management, Windows configuration utility and SNMP protocol
Offers easy installation, as well as included setup and diagnostic programs
Supplied with power supply
Supports Windows (2000, XP, Vista, 7, 8, 10), Mac (OS 10.3 and higher) and Linux

SEE OFFER SEE OFFER ebay

SEH UTN PRO - Device server, 1x RJ45, 2x USB 3.2 Gen 1 195.99 EUR utnserver Pro - remote solution for connecting local USB devices

In times when home office solutions are increasingly required, utnserver Pro offers numerous features that enable secure and reliable working from home.
This makes it the perfect choice for small to medium-sized businesses and offices, for remote environments and, of course, for the home office.

High data throughput of up to 80 MB/s on Gigabit networks
Isochronous USB mode: transfer audio-video data
2 x USB 3.2 Gen 1 SuperSpeed Ports
Securely connect USB devices in remote environments
A direct and encrypted point-to-point connection over the network protects USB devices from unauthorized access
Encrypted connection via LAN, VPN, VLAN and Internet
Powering down individual USB ports prevents unauthorized use or data tampering, providing power saving potential
36 months manufacturer warranty (Free extension to 60 months)
Free updates (complete solution: total hardware and software package) and worldwide support

Features utnserver Pro
The utnserver Pro provides all kinds of USB devices over a network and works on the ''plug & play'' principle: you plug it into your network and connect your USB devices to its USB ports.
Using the associated SEH UTN Manager software, you establish a virtual USB connection to the USB device with one click.
Then you can use the connected USB device just like a locally connected one.
The connection to your USB devices works over LAN, VPN, VLAN, Internet and in server-based and virtualized environments.
This allows organizations to access their USB devices from any work environment and location: Convenient, high-performance and encrypted!

Best USB device compatibility
Use a variety of USB devices in a controlled and flexible way over the network, such as RDX drives, scanners, medical devices, measuring devices, printers, cameras, telephone systems and many more.

SEE OFFER SEE OFFER ebay

LCS PS130 - Longshine print server, 3 ports 77.12 EUR LCS-PS130, 3-port print server, multi-protocol, 10/100 Mbit/s

Port parallel print server
- 3 x parallel ports
- 1 x RJ-45 10/100 Mbit/s port
- Vista-compatible

The PS-130 multi-protocol print server with three parallel ports is designed for medium-to-large
networks. It is easy to install and set up via a Windows-based programme,
web browser, Telnet or HP Web JetAdmin.
Characteristics:
. Supports DHCP (client)
. Supports SNMP
. Supports SMB
. Supports bi-directional function
(IEEE 1284)
. Supports Internet Printing Protocol
(IPP)
. Firmware upgrade via TFTP and
web interface
NetWare:
. Compatible with NetWare 3.12, 4.x, 5.x (NDS & Bindery)
. Supports NetWare ''PrintServer'' mode
. Supports frame type auto-detection function
. Features POST (Power On Self Test)
. Auto-Login to NetWare Server after recovery from network failures
Windows NT/2000/XP:
. Supports Windows NT/2000/XP TCP/IP LPR port printing
. Can be implemented as a Windows print monitor
. Supports Windows NT/2000 Printer Pool
. Supports DHCP
. Supports IPP (Internet Printing Protocol)
. Windows-based configuration software
UNIX:
. Supports RFC 1179 peer-to-peer printing
. Supports BSD-based UNIX systems
. Supports AT&T System V-based UNIX system
. Supports RARP, BOOTP and DHCP protocols
. Supports UNIX LP Daemon (LPD/LPR) printing
. Supports IPP (Internet Printing Protocol)
Specifications:
Standard: ANSI/IEEE 802.3, IEEE 802.3u
Ports: 1 x RJ-45 10/100 Mbit/s, N-way
3 x parallel ports, D-sub, female, bi-directional
Internal memory:
Flash ROM
SRAM
Eprom
LED: Status, error
Supported operating systems: Windows 98/98SE/ME/W2K/XP/Mac/Unix/Linux
Network protocols: TCP/IP, IPX, NetBui, AppleTalk, LPR
Certificates: CE, FCC Class A
Power supply unit: external power supply unit 5 V/2 A
Carton contents: one print server, power supply unit, user manual, CD with software/user manual

SEE OFFER SEE OFFER ebay

LC POWER LC-HUB-U3-4-V2 - USB 3.0 hub, 4 ports, USB-C power supply 18.17 EUR Connect up to 4x USB-A peripheral devices to your computer or notebook via USB-A.

USB 3.2 Gen. 1x1 interface, backwards compatible with USB 2.0/1.1
4x USB-A ports
1x USB-C port for an additional power supply
Plug and play
LED status indicator

Nominal data transfer rate:

SuperSpeed up to 5 Gb/s (USB 3.0)
High-speed up to 480 MB/s (USB 2.0)
Full speed up to 12 MB/s (USB 1.1)

SEE OFFER SEE OFFER ebay

EPSON LQ-350 - 24 dot-matrix printer (parallel/serial/USB) 301.43 EUR 24 dot-matrix printer

• Excellent reliability: MTBF of 10,000 operating hours
• Energy efficient: 1.3 W in idle mode, 22 W in operation
• Economical: ribbon yield of 2.5 million characters
• Easy integration: parallel and serial interface, USB port
• Compact design: fits perfectly on any desk

The LQ-350 is an extremely economical printer and helps you save money thanks to its high ribbon yield of 2.5 million characters and its low power consumption. Thanks to its low consumption of just 1.3 W in idle mode and 23 W in operation, the LQ-350 is ENERGY STAR certified.

Its standard features include a parallel interface, serial interface and USB port, making the LQ-350 easy to integrate. It also fits perfectly on any desk owing to its compact design and cable guide system.

SEE OFFER SEE OFFER ebay

LCS-6321 - Longshine PCI Express X1 - 2 x serial 36.81 EUR The LCS-6321 is an I/O controller card for the PCIe slot with two serial ports. Today's mainboards have ever fewer serial or parallel ports. This card enables you to simply retrofit the required ports. The card can be used for printers, machine control or other devices.

General
- Low power consumption
- Selectable reception trigger level
- Programmable baud rate generator
- Supports modem control signals
- 5, 6, 7 & 8-bit character
- Allows Even, Odd, No Parity or Force Parity settings
- Supports Status Report
- Compatible with 16C550
- Built-in 16C550-compatible UART with 16 bytes
- Re-Map function for legacy ports
- Supported operating systems: Windows 2000/XP/Server 2003

Specifications:
• Standard: PCI Express Base Specification 1.0a
• Chipset: NetMos MCS9835CV
• Connection/bus: PCI-Express X1
• Ports: 2 x 9-pin serial ports, male.
• Data rates: up to 230,400 bit/s
• Buffer: 16 byte FIFO (send & receive)
• Work environment: temperature 0°C to +70°C

Included with delivery
• PCIe card
• CD driver
• Instructions

SEE OFFER SEE OFFER ebay

LCS-GS8116A - Longshine 16x 10/100/1000 MBit/s Switch 104.99 EUR Fanless 16-Port Switch

16 x 10/100/1000 Mbps RJ-45 NWay ports
Supports NWay protocol for speed (10/100/100 Mbps) and Duplex mode (half/full) auto-detection.
Supports Green Ethernet IEEE802.3az
Supports MDI/MDI-X auto crossover
Supports full and half duplex operation on all ports
Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
Wire-speed packet filtering and forwarding rate
Store-and-forward architecture filters fragment & CRC error packets
Supports 8K MAC address entries in whole system
500K bytes buffer memory
9K bytes jumbo frames
Supports extensive LED indicators for network diagnostics
Supports broadcast/multiple storm control
8.5'' rack mount size design
10'' and 19'' rack mount bracket (optional)

SEE OFFER SEE OFFER ebay

DIGITUS DN130031 - USB print server, 1-port USB 2.0 74.65 EUR USB 1-port print server, 1 x RJ45, 1 x USB A, USB 2.0

Easily turns desktop printers into network printers for shared use

Effortlessly connect a printer to a PC using the Fast Ethernet Print Server. This product supports well-known network and printing protocols, and also peer-to-peer and server-based printing. It is compatible with all standard operating systems from Windows, Mac or Linux. It also supports web-based management, Windows Configurations Utility and SNMP protocol. And thanks to the simple, easy installation, you can get started in no time at all!

Includes
• USB 2.0 Ethernet print server
• Power supply unit

SEE OFFER SEE OFFER ebay

SYNOLOGY DS124 - NAS-Server DiskStation DS124 empty housing 174.66 EUR --Delivery without hard disk--

For further explanations, as well as technical data, please refer to the deposited data sheet.

Realtek RTD1619B CPU
1 GB DDR4 memory
1x 3.5'' or 2.5'' SATA SSD/HDD slot
2x USB 3.2 Gen 1 ports
1x RJ45 Gigabit Ethernet

Mini hub for data management
Bring distributed data under control with the ultra-compact DS124 data center that enables effortless centralization, organization and sharing of data.
With the royalty-free solutions in Synology DiskStation Manager (DSM), you can create a secure private cloud, conveniently access files on any device, and seamlessly collaborate with partners or customers.

Centralized Data Hub
Consolidate your data assets with full control over your data and access across multiple platforms

Seamless sharing and synchronization
Sync and share data across all devices and operating systems, for effortless collaboration

Integrated data protection
Secure your files to a variety of destinations

Intelligent video surveillance
Create a comprehensive video surveillance system that adapts to your needs

Package contents:

1x DS124 main unit
1x quick installation guide
1x accessories package
1x AC power adapter
1x RJ-45 LAN cable

SEE OFFER SEE OFFER ebay

STARTECH.COM ST ST73007UA - 7 port compact USB 3.0 hub - aluminum 80.18 EUR Add seven USB 3.0 (5 Gbps) ports to your MacBook with this silver hub with longer Apple-style cable

Stylish and stylish, with a silver-colored, sandblasted finish that fits with your MacBook
Rear port alignment for better USB device management and less confusion
Set up the hub as needed thanks to the compact, lightweight housing and an integrated longer cable
Robust aluminum housing provides reliable performance
SuperSpeed USB throughput with support for up to 5 Gbps

This compact 7-port USB 3.0 hub fits perfectly with the elegant design of your MacBook. The elegant silver-colored sandblasted case fits perfectly with your Apple laptop. And because the hub has a solid aluminum casing, it is lightweight and durable, making it ideal for traveling or working at a desk.

Expands your connectivity options and looks good too
With this high-quality Apple-style USB hub, you can easily extend the connectivity options of your MacBook. It offers seven USB 3.0 (also known as USB 3.1 Gen 1) ports in a compact package. More ports provide scalability to connect additional USB devices. You can also keep devices connected so they're ready to go when you need them.

The 7-port USB 3.0 hub looks as stylish and modern as your MacBook, ultrabook or laptop with its silver-colored sandblasted finish.

The hub is equipped with a built-in cable that is 98 cm longer than most conventional hubs. The longer cable gives you the flexibility to place the hub and devices exactly as you want them to, and ensures that the hub can be connected to a laptop or tablet regardless of where the USB 3.0 port is located.

Compact and robust
The compact hub is equipped with seven ports. Unlike other USB 3.0 hubs, where the many ports are close together, making it difficult to connect multiple devices to adjacent ports, this hub provides ample space between each port. The extra space between ports allows you to connect devices and cables with longer connectors without compromising the compact design of the hub.

The robust aluminum housing provides reliable protection, making the hub ideal for travel, such as home-to-office travel. Because this compact hub takes up minimal desktop space, you can use it in hot desk or bring your own Device (BYOD) environments.

Save time and money
The easy-to-use hub is Plug and Play and Hot Swap compatible, so you can install it quickly without the need for additional drivers or software. An AC adapter is also included, so you can be sure that you can now connect virtually any USB 3.0 peripheral, even devices with high power requirements. You can also save the effort and costs of purchasing new devices by using the USB 3.0 hub for your current USB 2.0 and 1.x devices.

SEE OFFER SEE OFFER ebay

LC POWER LC-DOCK-U3-HUB - Docking station 2x 2.5''/3.5'' SATA, USB 3.0 hub 45.04 EUR USB 3.0 dual bay HDD docking station with copy function and three-port USB 3.0 hub.

Suitable for 2.5''/3.5'' SATA-HDDs and SSDs
2.5'' up to 1 TB, 3.5'' up to 10 TB
Copy function available at the touch of a button
Sector-by-sector copy including boot partition
Hot-Swap function
Tool-free HDD/SSD replacement
USB 3.0 port
Three-port USB 3.0 hub
Nominal data transfer rate up to 5 Gb/s
LED status and progress indicator
UASP support

System compatibility:
Microsoft Windows 7/8/8.1/10 or higher

Included in delivery:
Docking station, USB 3.0 cable, mains adapter and instruction manual

SEE OFFER SEE OFFER ebay

DIGITUS DN-13024 - WLAN device server, 1x RJ45, 1x USB 2.0 102.92 EUR Wireless 300N Multifunction Network Server 2-port, USB2.0, Network USB Hub, Print Server

Turn USB devices into network-enabled end devices with access via WLAN at up to 300Mbps (2T2R)
Wireless connection between USB printers and multiple network users
Easy installation via web browser and user-friendly web interface
Offers space for 2 USB devices (max. 128 devices with corresponding hub)
LAN port achieves transfer rates of up to 100 Mbps
Access to storage locations of multifunction printers via the network
Access to USB memory via the network
Synchronization of iTunes with iPhone/iPad via the network
Installation of printer drivers also via the network
Compact size with many functions

With the DIGITUS® 2-Port USB 2.0 Wireless Multifunction Network Server you can operate USB devices without connecting them directly to your PC or notebook. Reach your USB devices anywhere in your local network, synchronize smartphones or install print drivers remotely. You can also access the memory of compatible USB devices via the network, such as multifunction printers or external hard disks. Speeds of up to 300Mbps are possible with this network server and all USB-enabled devices can be integrated wirelessly. You can configure the connected end devices and the wireless multifunctional network server extensively via the user-friendly web interface. Turn any compatible USB device into a network device and operate it remotely!

Technical details

Print server - ideal for multifunction printers
NAS - Connect your storage media and turn the server into a network storage. Access your data via the network or Internet. Wherever you want!
Network USB hub - Connect USB devices via the network! No more annoying cables for mobile users!
Supports all types of printers, scanners, DVD drives, storage devices, cameras, webcams, digital TV tuners, iPods, iPads, iPhones and many more...
LAN: 10/100Mbps
Wireless LAN: up to 300Mbps, IEEE802.11b/g/n standard - 2T2R
Secure 64/128-bit WEP, WPA or WPA2 encryption
Easy installation via web browser
USB A ports: 2 x USB 2.0 (high-speed)
Memory: 64 MB
LED indicators: Power, LINK, ACT, USB1, USB2
Integrated processor: 580 MHz
Power supply: 5V / 2A (DC plug)
Network protocols: IPv4 TCP/IP
Configuration: TFTP, DHCP, HTTP, firmware upgrade, restart, reset
NetUSB compatible
Supports USB hub extension
Maximum number of USB devices: 128 (with hub)
Power supply: 100 ~ 240 VAC, 50/60 Hz / Output: 5 VDC, 2 A
Dimensions: 103 x 69 x 28 mm (LxWxH)
Weight: 89.8 g
Supported operating systems: Windows 7, 8, 10, macOS X 10.7 Lion, macOS X 10.8 Mountain Lion, macOS X 10.9 Mavericks, macOS X 10.10 Yosemite, macOS X 10.11 El...
SEE OFFER SEE OFFER ebay

EXSYS EX-11494-2 - PCIe (x4) > 4 ports USB 3.2 Gen 1 card incl. low profile bracket 122.51 EUR 4-ports USB 3.2 Gen 1 PCIe (x4) card incl. low profile bracket (4x Renesas module)

The EX-11494-2 USB 3.2 Gen 1 PCI Express card with 4 ports provides a reliable solution for desktop, server and workstation computers to connect USB 3.2 peripherals via the PCIe slot. The architecture with multiple independent USB 3.2 Gen 1 channels supports simultaneous operation of up to 127 physical USB devices for each channel while maintaining speed compatibility with USB 1.1 and USB 2.0.

USB 3.2 Gen 1 PCIe card with four external ports
Each output has its own Renesas chip for maximum data transfer
Fully compliant with the x4 PCI Express Gen2 specification
Fully compliant with the USB 3.2 Gen 1 and Intel xHCI specifications
Supports all USB-compatible data transmission types, such as Control/Bulk/Interrupt/Isochronous Transfer
900-mA USB bus power supply for each port
Hot swapping and plug-and-play
Low-profile bracket is supplied
Chip set: 4x Renesas D720201_202

Included in delivery:
EX-11494-2, low-profile bracket, driver CD, manual

SEE OFFER SEE OFFER ebay

EXSYS EX-12003 - 2 port USB 3.1 PCIe x2 card, 2x USB Type-C socket, incl. bracket 79.15 EUR The EX-12003 USB 3.1 (Gen2) PCIe (Gen3) (x2) card provides two external Super-speed+ USB 3.1 ports with C-socket. It has been developed to connect two additional USB 1.1, 2.0, 3.0 and 3.1 devices to your workstation, desktop or server. It supports USB 1.1 Low-speed (1.5Mbps), Full-speed (12Mpbs), USB 2.0 High-speed (480Mbps), USB 3.0 Super-speed (5Gbps) and USB 3.1 Super-speed+ (10Gbps). It is the perfect technology for external storage enclosures, digital cameras, webcam, scanners and more. To support the 3.0A power supply on the external USB 3.1 ports, you do not need an additional power supply from the PC power supply. With the EX-12003, a low profile bracket is supplied for use with narrow housings up to a maximum height of 8cm.

USB 3.1 Gen2 PCIe x2 card with two C-sockets
Compatible with USB 3.1 Rev. 1.0 and Intel xHCI Rev. 1.0 Specifications
Compatible with PCI-Express Gen3 specifications
Compatible with USB attached SCSI Protocol Rev. 1.0
Supports hot swapping and plug-and-play
Supports 3.0A current at each C output
Supports up to 127 USB devices (USB 1.1, USB2.0, USB3.0 and USB3.1)
Chip set: ASMEDIA ASM3142

Driver: Win XP/Vista/ 7/ 8.x /10 (32&64-bit) win Server 200x&20xx, Linux
Operating System: According To Driver
Scope of delivery: EX-12003, low profile bracket, driver CD, manual

SEE OFFER SEE OFFER ebay

EXSYS 1185HMVS-2 - 4-Port Metal USB 3.2 Gen1 Hub with 15KV ESD/Din-Rail 98.74 EUR The rugged, industrial grade EX-1185HMVS-2 USB hub with four USB 3.2 Gen1 (previously called USB 3.0) outputs screwable and 15KV ESD surge protection can be installed on the wall or on a carrier rail. It connects to a computer or server with the included USB 3.2 Gen1 cable. It supports Hi-Speed USB 3.2 Gen1 data transfer rate up to 5Gbit/s and is downward compatible to USB 1.1. It can be powered by USB bus power (7-48V) or via a two-wire terminal strip where the wires are just plugged in.

USB 3.2 Gen1 Metal HUB with Four Downstream
15KV ESD surge protection for each output
Power supply +7V to +48V DC via terminal block
power supply optionally from USB-BUS +5V (bus power)
easy installation with integrated DIN-rail bracket
automatic detection of data transfer rate for connected peripherals
1.5A current on all 4 ports
automatic detection of input polarity at the power terminal block
compact industrial design
robust metal housing
1 x LED voltage indicator
chip set: Genesys GL3523

SEE OFFER SEE OFFER ebay

EXSYS EX-11053 - USB 2.0 PCIe board 3 port incl. LP bracket (NEC Chip-Set) 56.36 EUR The EX-11053 USB 2.0 PCIe bus card provides three external ports which are fully compatible with OHCI specifications 1.1 and USB 2.0 ECHI standards. It has been developed to expand a total of three additional USB high speed ports for PCs, small workstations or servers via the PCIe bus. It also supports older USB 1.1 peripherals. It is the ideal expansion card for external hard drive enclosures, digital cameras, webcams, scanners and many other peripheral devices. The EX-11053 comes with a low profile bracket for narrow computer housings up to 8 cm in height.

USB version 1.1 to 2.0
Compatible to Microsoft Windows Standard Open HCD Driver
Support up to 127 device
Fully Compliant with PCI Express Base Specifications, Revision 1.0a/1.1
Support ''Hot Swapping” and ''Plug-and-Play”

SEE OFFER SEE OFFER ebay

EXSYS EX-11495 - PCIe (x4) > 4 C ports USB 3.2 Gen 1 incl. low profile bracket 336.47 EUR USB 3.2 Gen 1 PCIe (x4) card with four C ports incl. low profile bracket (4x Renesas module)

The EX-11495 USB 3.2 Gen 1 PCI Express card with four USB-C ports provides a reliable solution for desktop, server and workstation computers to connect USB 3.2 Gen 1 peripherals via the PCI Express slot. The architecture with multiple independent USB 3.2 Gen 1 channels supports simultaneous operation of up to 127 physical USB devices for each channel while maintaining speed compatibility with USB 1.1 and USB 2.0.

USB 3.2 Gen 1 PCIe card with four external USB-C ports
Each output has its own Renesas chip for maximum data transfer
Fully compliant with the x4 PCI Express Gen2 specification
Fully compliant with the USB 3.2 Gen 1 and Intel xHCI specifications
Supports all USB-compatible data transmission types, such as Control/Bulk/Interrupt/Isochronous Transfer
900-mA USB bus power supply for each port
Hot swapping and plug-and-play
Low-profile bracket is supplied
Chipset: Renesas D720201_202

Included in delivery:
EX-11495, with low-profile bracket, driver CD, manual

SEE OFFER SEE OFFER ebay

EXSYS EX-11092 - USB controller 3.0, 2 ports, PCI Express 49.12 EUR The EX-11092-2 USB 3.0 PCI-Express card offer you two screw lock Super-Speed USB 3.0 ports. The EX-11092-2 it’s design for connect two more USB 1.1, 2.0 or 3.0 peripheral device to your Workstation, Desktop or Server. He support USB 1.1 Low-Speed (1.5Mbps), Full-Speed (12Mpbs), USB 2.0 High-Speed (480Mbps) and USB 3.0 Super-Speed (5Gbps). It is an ideal technology for external storage devices, digital cameras, webcams, scanners and much more. For support the power 900mA to the external USB 3.0 ports, don’t need the additional power from the computer case power supply. With EX-11092-2 we ship also a Low Profile bracket for small computer case with a maximum high of 8cm.

Features

Compliant with USB 3.0 and Intel xHCI specification
Supports all USB Compliant Data Transfer Type such as Control/Bulk/Interrupt/Isochronous
Support up to 123 device
Fully PCI Express Gen2 Specification Compliant
Support “Hot Swapping” and “Plug-and-Play”

Specifications

Chip-Set: Renesas uPD720202
Data transfer rate:
Low-Speed 1.5Mbps / Full-Speed (12Mbps)
High-Speed (480Mbps)
Super-Speed (5Gbps)
Connectors:
2 x External A-Female screw lock connector
1 x 4 Pin plug for power via the PC power supply
Hardware system: PCI-Express x1 to x16 slot
Operating systems: Win XP/ Vista/ Win7/ 8 for (32&64) Server(2003 & 2008 & 2012), Linux
Need driver for OS: Win XP/ Vista/ Win7/ Server (2003 & 2008)
Operating Temperature : 320 up to 1310 Fahrenheit
Storage Temperature: -200 up to 1670 Fahrenheit
Rel. Humidity: 5% to 95%
Size: 65 x 61 mm
Weight: 200g
Packaging contents: EX-11092-2, Low Profile bracket, Driver CD, Manual

SEE OFFER SEE OFFER ebay

SILEX TECHNOLOGIE SILEX DS-700 - Device Server, 1x RJ45, 1x USB 2.0, 1x USB 3.0 180.49 EUR USB Device Server DS-700

1x RJ45 Gigabit Ethernet
1x USB 3.0 type A
1x USB 2.0 type A

USB 3.0 device server with enterprise security and IPv4/IPv6 support
With the Silex DS-700 you can easily integrate USB devices into a network and share them over the network.
Printers, scanners, hard drives, dongles, card readers and other USB devices become network-enabled.
This allows the USB device to be placed anywhere on the network without a direct computer connection.
In addition, multiple users can access the USB device in succession.

Sharing devices from two different networks
Office devices used on one network can now be simultaneously connected to another network.
Both networks remain isolated.
This is made possible by the DS-700's ability to convert a USB device port on the device into a local network port.

High data bandwidth
The DS-700's USB 3 SuperSpeed port provides higher bandwidth over Gigabit Ethernet LAN than the traditional USB 2.0 device server. This ensures extra fast data transfer.

Support for ischronous transfer
USB devices such as webcams or speakers that use isochronous transmission can be added to the network.

Support for standard TCP/IP printing (LPR/RAW).
The DS-700 acts as a print server when a printer is connected.
The print server supports two common network printing protocols, RAW and LPR print modes.

SX Virtual Link
SX Virtual Link is software for network access to USB devices connected to the USB device server.
Using SX Virtual Link, you can connect or disconnect a remote USB device and request that another user share a device for their own use.

Simple configuration for quick installation
Configuring the DS-700 is quick and easy using the Device Server Setup utility, an integrated configuration web page, or AMC Manager®.

Package contents:

DS-700
Power supply
Instruction manual

SEE OFFER SEE OFFER ebay

EXSYS EX-11072 - PCIe > 2+2 ports USB 3.2 Gen 1 2 ext. + 2 int. ports 61.53 EUR USB 3.2 Gen 1 PCIe card with 2 external and 2 internal ports

The EX-11072 USB 3.2 Gen 1 PCIe card (previously called USB 3.0) provides 2 external and 2 internal SuperSpeed USB 3.2 Gen 1 ports. It is designed to connect 4 additional USB 1.1, 2.0 or 3.0 devices to your workstation, desktop or server, and supports USB 1.1 low-speed (1.5 Mbps), full-speed (12 Mbps), USB 2.0 high-speed (480 Mbps) and USB 3.2 Gen 1 super-speed (5 Gbps). To support the 900 mA current on the external or internal USB 3.2 Gen 1 port, you will need the power connection from the PC power supply unit. The internal 20-pin header USB 3.2 Gen 1 connector is motherboard-compatible. Includes adapter kit with 2x USB 3.2 Gen 1 sockets.

Compatible with USB 3.2 Gen 1 and Intel xHCI specifications
Supports all USB-compatible data transmission types, such as Control/Bulk/Interrupt/Isochronous
Supports up to 123 devices
Compatible with PCI Express Gen2 specifications
Supports ''hot swapping'' and ''plug-and-play''
Chip set: Renesas uPD720202

Included in delivery:
EX-11072, 3.5'' adapter kit, standard bracket, LP bracket, driver CD, manual

SEE OFFER SEE OFFER ebay

SEH PS105 - Printserver, 1x parallel 201.12 EUR Parallel print server
The Ethernet print server PS105 enables the network connection of an output device with parallel port.
On the network side, the PS105 Pocket Printserver supports Ethernet networks of the 10BaseT/100BaseTX type (network connector: RJ45).
The PS105 Pocket Printserver can be plugged directly into the parallel port of the printer without any additional cable.

For all common operating systems: Windows, Apple, Linux.
Security: encryption, authentication, access control and more!

The PS105 is a compact Ethernet print server with one port for connecting a parallel output device to a network.
It supports 10BaseT and 100BaseTX networks (RJ45 connector).
The small PS105 pocket print server connects directly to the parallel port, so no additional cable is required!
The used network speed is automatically adopted.

Features

Quick and easy installation
Support of all common operating systems and protocols starting from Windows 11
Pushbutton for printing diagnostic and status information
Automatic notification of printer errors
Print job monitoring
Management via browser
Regular firmware updates
Comprehensive support

Security

IPv6 Support
IPSec Support
Up-to-date ThinPrint Client, ThinPrint SSL encryption
ThinPrint AutoConnect
Comprehensive access protection
Encryption of print data (TLS/SSL)
Support for eight logical printers per port
Software download via FTP or HTML

SEE OFFER SEE OFFER ebay

SYNOLOGY DS223J - NAS-Server Disk Station DS223j empty housing 228.03 EUR --Delivery without hard disk--

For further explanations, as well as technical data, please refer to the deposited data sheet.

Realtek RTD1619B CPU
1 GB DDR4 memory
2x 3.5'' or 2.5'' SATA HDD/SSD drive bays
2x USB 3.2 Gen 1 ports
1x RJ45 Gigabit Ethernet

A centralized location for comprehensive file management and sharing
DS223j is an efficient all-in-one solution for storing and sharing your data Thanks to two storage drive bays and Synology DiskStation Manager (DSM), DS223j lets you create a private cloud to protect your files, share your data across multiple devices, and store security footage with intelligent video surveillance tools.

Centralized data storage
Centrally store up to 36TB*, with full control over your data and the ability to access it from anywhere, regardless of platform

Next generation file system
Take advantage of file self-repair, lightning-fast data snapshots, and rapid data cloning**.

Secure sharing and synchronization
Securely access and share files and media with clients, colleagues, and employees from anywhere

Easy data backup
Back up your media library or document assets to a variety of destinations

Versatile camera surveillance
Protect your premises with flexible surveillance tools

Package contents:

1x DS223j main unit
1x quick installation guide
1x accessories package
1x AC power cable
1x AC power adapter
1x RJ45 LAN cable

* Gross capacity. Total capacity may vary depending on drives used and RAID configuration.
** Function is available on DSM 7.2.

SEE OFFER SEE OFFER ebay

EXSYS S96102-2 - PCIe > 2 ports USB 3.2 Gen (Renesas) 23.28 EUR b>PCIe USB 3.2 Gen1 card with 2 ports (Renesas)

The EX-S96102-2 USB 3.0 PCI Express card provides two external super-speed USB 3.0 ports. It was developed to connect two additional USB 1.1, 2.0 or 3.0 end devices to your workstation, desktop or server. It supports USB 1.1 low-speed (1.5 Mbps), full-speed (12 Mbps), USB 2.0 high-speed (480 Mbps) and USB 3.0 super-speed (5 Gbps). It is the perfect technology for external storage housings, digital cameras, webcams, scanners and more. You will need the power connection from the PC power supply unit to support the 900 mA of power to the external USB 3.0 ports, incl. LP bracket

Compatible with USB 3.0 and Intel xHCI specifications
Supports all USB-compatible data transmission types, for example: control/bulk/interrupt/isochronous
Supports up to 123 devices
Compatible with PCI-Express vers. 2.0
Supports ''hot swapping'' and ''plug-and-play''
Chip set: Renesas

SEE OFFER SEE OFFER ebay

VALUE 14992015 - USB 3.0 switch 2 port, 2x USB-B to 1x USB 3.0 type A 33.99 EUR Manual USB 3.0/USB 3.2 Gen 1 sharing switch to access different computers on a USB device

For the use of a peripheral device such as a printer/scanner on two PCs without using a print server

Also suitable for SSDs, USB sticks or other data carriers

Supports USB 3.0/USB 3.2 Gen 1 and therefore data transfer rates of up to 5 Gbit/s

The assignment of the PC to the device takes place via a switch on the device

No additional power supply needed

SEE OFFER SEE OFFER ebay

EXSYS EX-11081-2 - PCIe > 1+1 ports USB 3.2 Gen (Renesas) 44.99 EUR PCIe USB 3.2 Gen 1 card with 1+1 ports (Renesas)

The EX-11081-2 USB 3.2 Gen 1 PCIe card (formerly USB 3.0) provides one external and one internal SuperSpeed USB 3.2 Gen 1 port. It was developed to connect two additional USB 1.1, 2.0 or 3.2 end devices to your workstation, desktop or server. It supports USB 1.1 low-speed (1.5 MB/s), full-speed (12 MB/s), USB 2.0 high-speed (480 MB/s) and USB 3.2 Gen 1 SuperSpeed (5 GB/s). To support the 900 mA current at the external or internal USB 3.2 Gen 1 port, you need the power connection from the PC power supply.

Compatible with USB 3.2 Gen 1 and Intel xHCI specifications
Supports all USB-compatible data transmission types, for example, control/bulk/interrupt/isochronous
Supports up to 123 devices
Compatible with PCI Express Gen2 specifications
Supports ''hot swapping'' and ''plug-and-play''
With low-profile bracket for narrow PC cases up to 8 cm
Chipset: Renesas uPD720202

Included in delivery:
EX-11081-2, with low-profile bracket, driver CD, manual

SEE OFFER SEE OFFER ebay

EXSYS EX-13021 - Network card, USB 3.2, Gigabit Ethernet, 1x RJ45 51.24 EUR EXSYS EX-13021HMV USB 3.2 to Ethernet 1Gigabit B connection

With the EX-13021HMV, you can connect a notebook, desktop PC or server in a 19'' rack to a 10/100/1000 Mbps network via the USB B port (USB 3.2 Gen 1).
It can also be installed in addition to an existing network card. Installation is very simple and does not require the systems to be opened. Thanks to its compact and robust design, the EX-13021HMV is ideal for use in harsh environments.

It is also possible to screw the USB 3.2 Gen 1 cable to the EX-13021HMV. The scope of delivery includes two wall mounting brackets and a DIN rail kit for installation in a 19'' rack.

Compliant with Universal Serial Bus 3.2 Gen 1
Compatible with USB 2.0 and USB 1.1 standard
Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with return load flox control
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports crossover detection and auto-correction
Power supply from the USB bus (bus power)
Supports ''Wake-on-LAN
Screwable USB 3.2 Gen 1 cable for secure installation
Metal housing with wall and DIN rail kit for industrial applications
LED indicator for power and Ethernet connection
Chipset: ASIX AX88179

Scope of delivery:

EX-13021HMV
USB 3.2 Gen 1 cable (screwable)
Wall mounting bracket, DIN rail kit
User manual

SEE OFFER SEE OFFER ebay

EXSYS EX-13020 - Network card, USB C 3.2, Gigabit Ethernet, 1x RJ45 58.48 EUR EXSYS EX-13020HMV USB 3.2 to Ethernet 1Gigabit C port

With the EX-13020HMV, you can connect a notebook, desktop PC or server in a 19'' rack to a 10/100/1000 Mbit/s network via the USB-C port (USB 3.2 Gen 1).

It can also be installed in addition to an existing network card.

Installation is very simple and does not require the systems to be opened. Thanks to its compact and robust design, the EX-13020HMV is ideal for use in harsh environments.

It is also possible to screw the USB 3.2 Gen 1 cable to the EX-13020HMV.

Compliant with Universal Serial Bus 3.2 Gen 1
Compatible with USB 2.0 and USB 1.1 standard
Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with return load flox control
Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports IEEE 802.3az (Energy Efficient Ethernet)
Supports crossover detection and auto-correction
Power supply from the USB bus (bus power)
Supports ''Wake-on-LAN
Screwable USB 3.2 Gen 1 cable for secure installation
Metal housing with wall and DIN rail kit for industrial applications
LED indicator for power and Ethernet connection
Chipset: ASIX AX88179

Scope of delivery:

EX-13020HMV
USB 3.2 Gen 1 cable (screwable)
Wall mounting bracket
DIN rail kit, manual

SEE OFFER SEE OFFER ebay

SILEX TECHNOLOGIE SILEX DS-600 - Device server, 1x RJ45, 1x USB 2.0, 1x USB 3.0 185.15 EUR In the professional business environment, there are a variety of USB devices, such as scanners, multifunction printers, hard disks, RDX systems or cameras. USB Device Servers turn USB endpoints with limited length USB cable into flexible network resources. In addition, they give the enterprise user the freedom to use traditional USB devices in secure or virtual IT environments. Furthermore, they enable the use of USB devices by several people one after the other, resulting in an optimized cost-benefit ratio and savings potential can be used.

Ideal for: Document scanners, printers and copiers, industrial USB camera, hard disks and RDX drives, USB storage media

USB Device Server
A USB Device Server is a network adapter that uses Silex USB Virtual Link technology to make USB devices network-ready. Virtually any type of USB device can be used in and over the network, just like directly connected via USB cable. Existing software and drivers can continue to be used.

SX Virtual Link
Silex Technology has developed the SX Virtual Link 4.0.0 or later application software for Windows computers. It adds a virtual USB port to the machine that the computer uses to exchange data with the USB device. The operating system behaves like a direct USB cable connection, although it actually communicates bi-directionally over a network connection.

IEEE 802.1X Authentication
Compatible with IEEE 802.1X authentication. Supported protocols are EAP-TLS, PEAP (PEAPv0), EAP-TTLS.

Data encryption with AES-256
Data encryption for high-security networks. Enables secure transmission of sensitive data over network cables.

Password for USB port
The password can be set individually for each USB port. This allows you to control who is allowed to access a particular USB device.

Isochronous Data Transfer Mode
Devices such as industrial cameras (full- and high-speed) and speakers that require continuous and real-time data transmission can also be used in a network environment.

Standard TCP/IP printing (LPR/RAW)
The commonly used printer protocols RAW and LPR are supported. The DS-600 can be used both as a standard TCP/IP print server (without the use of software) and as a virtual print server for GDI and multifunction printers (when using SX Virtual Link).

Network attached Storage (NAS) capability
USB storage media can be configured as NAS on the DS-600. Use without connecting via software possible. Multiple users can read or write at the same time.

Easy To Install
Free software download from our website (Device Server Setup). To use the software, simply follow the on-screen instructions.

ECO mode
To save power, the DS-600 can automatically turn off the USB port power supply after an adjustable period of inactivity. The ECO mode is automatically...

SEE OFFER SEE OFFER ebay

LC POWER LC-25U3-BECRUX-C - External 2.5'' SATA HDD enclosure, USB 3.1 27.01 EUR

USB 3.1-gen. 2-type-C port
For a 6.35-cm/2.5'' SATA hard drive/SSD
Capacity up to 8 TB
SATA 6 GB/s chipset (SATA I/II/III)
UASP support
Plug'n'Play

High-quality external enclosure for 6.35-cm/2.5'' SATA hard drives with aluminium body for excellent heat dissipation. Stylish, modern design and USB 3.1-gen. 2-type C port for maximum data transfer speeds.

Technical data:

Enclosure type: external USB 3.1-gen. 2-type C HDD enclosure
USB port: USB 3.1-gen. 2 type C Superspeed+
HDD installation option: 6.35-cm/2.5'' SATA I/II/III hard drive up to 6 Gb/s
HDD height: 9.5 mm
USB 3.1 transfer rate: up to 10 Gb/s
Chipset: ASM235CM
Housing material: aluminium
Enclosure dimensions (H x W x D): 12 x 78 x 130 mm
Weight (retail): 0.168 kg
Test mark: CE
Enclosure colour: black
Barcode: 4260070125997
Manufacturer code: LC-25U3-Becrux-C1

SEE OFFER SEE OFFER ebay

ASUSTOR ASUS AS6810T - NAS server empty enclosure 2179.51 EUR Ryzen is up to the challenge!

Quad-Core AMD Ryzen Embedded V3C14 CPU @ 2.3 GHz - 3.8 GHz Turbo
ECC RAM -16 GB ECC DDR5-4800 (Max 64GB)
Four M.2 slots for NVMe SSDs - doubled performance with PCIe 4.0
2x USB4 ports with 40 Gbit/s
3x USB 3.2 Gen 2 Type-A with 10 Gbit/s
2x 10 Gigabit Ethernet
2 x 5 Gigabit Ethernet
Supports Wake on LAN and Wake on WAN (5 GbE)

AMD's Ryzen Embedded SoCs are so efficient that they offer both energy savings and uncompromising desktop-class performance.
Four cores at up to 3.8 GHz help you transfer, store, create and more with incredible efficiency.

Server-grade ECC memory
ECC memory is memory most commonly used in servers for recognizing and correcting the most common types of data corruption.
This can help protect against data loss due to electromagnetic interference or crashes and makes the NAS Lockerstor 12R Pro our most stable NAS ever.

Speeds that go further and further Ryzen!
The Lockerstor Gen3 series is ASUSTOR's fastest NAS ever! The combination of AMD's Ryzen Embedded SoC, M.2 SSDs with PCIe 4.0, USB4 and dual 10GbE ensures that your NAS does everything extremely fast.
With four M.2 slots for NVMe SSDs and up to ten bays for HDDs, the Lockerstor Gen3 series offers you the best of speed and capacity.

PCI Express 4.0 delivers double the performance
The Lockerstor Gen3 series is equipped with four M.2 slots for NVMe SSDs.
These newly upgraded M.2 slots now support the PCI Express 4.0 bus, which doubles performance over PCI Express 3.0.
ADM supports both caching and storage for faster random I/O performance according to your needs.

Included:

1x AS6810T device
1x quick installation guide
1x power cable
4x 10GbE LAN cable (Cat 6a)
40x thumbscrew (for 3.5'' hard disk)
40x thumbscrew (for 2.5'' hard disk)

SEE OFFER SEE OFFER ebay

LINDY 42345 - 2-Port KVM Switch, HDMI 134.97 EUR 2 Port Cable KVM Switch, HDMI 18G, USB 2.0 & Audio

Console interface: HDMI type A (female), 2 x USB 2.0 type A, 2 x 3.5mm jack
PC/Server Interface: 2 x HDMI (male), USB 2.0 type A (male), 2 x 3.5mm jack - integrated cables
Maximum resolution: 4096x2160@60Hz 4:4:4 8bit
Separate audio ports: 2 x 3.5mm (female)
Maximum number of PC/Servers: 2

A KVM switch gives users the ability to control multiple computers from a single console (keyboard, mouse, and display) in quick access.
The Lindy 2 Port Cable KVM Switch for 18G provides a compact solution for accessing and controlling two HDMI-equipped PCs from a single keyboard, mouse and monitor set.
With its integrated cables, this switch can be easily connected directly to the computer systems without the need to purchase additional cables, saving time and money during installation.

Controls two HDMI-equipped PCs from a single console
Switching possible by device button, by software or by hotkeys
Supports HDMI signals at 18G, up to 4K 60Hz 4:4:4 8bit
Quick, hassle-free installation thanks to integrated and pre-mounted cables

Support for resolutions up to 4096x2160@60Hz 4:4:4 8Bit ensures optimal image quality, ideal for high-resolution graphical content in gaming setups, video editing or control systems with sophisticated GUIs.
The audio output on the device also allows connection of headphones or speakers for 2-channel audio and a microphone.
Additional USB peripherals can be added to the system using a hub (not included).

The KVM Switch has multiple switching options, via device buttons, hotkey or software switching, to provide users with simple and reliable control suitable for both professional and novice users.

Package Contents:

HDMI KVM Switch
Lindy manual

SEE OFFER SEE OFFER ebay

SEH INU-100 - Dongle Server, 2x USB 428.51 EUR INU-100 USB device server

1x RJ45 Gigabit Ethernet (10BaseT/100BaseTX/1000BaseT)
2x USB 3.0 ports (SuperSpeed)

The industrial solution for USB via network!
The INU-100 USB device server integrates almost any non-network USB device into the most diverse industrial environments with TCP/IP networks.
No matter if dongle, mass storage, cameras, sensors - with the INU-100 almost all USB devices can be used flexibly and without spatial restrictions exactly as required by your individual environment.
Thanks to USB 3.0, data transfer takes place at future-proof maximum speed.

The INU-100 is mounted in the control cabinet on the top-hat rail.
Thanks to the freely selectable power supply, smooth integration is possible.
Once integrated into the network, connected USB devices can be controlled remotely.
All that is required is to establish a connection manually or automatically via the associated SEH UTN Manager software tool.
A device can also be connected to the integrated relay - it can then be controlled automatically or manually.

Reliability and high availability are crucial for industrial environments.
Therefore, the INU-100 can be connected to two power supplies and has an automatic configuration backup to microSD card for fast configuration transfer to another device.
Events and faults can be reported to responsible parties for quick diagnosis and resolution.
Management and maintenance of the INU-100 can be performed remotely and efficiently as required by a productive industrial environment.

Full IPv6 support and fully encrypted USB communication between INU-100 and client
Isochronous USB mode: transfer audio-video data
USB device server with USB 3.0 SuperSpeed suitable for industrial environments
Installation in control cabinet via DIN rail housing on DIN rail according to DIN EN 60715 (35mm width)
Freely selectable power supply between 12 V and 48 V
Fail-safe and highly available: Connection to two power supplies in parallel possible, automatic configuration backup on microSD card
Integrated Change Over (CO) relay with automatic or event-controlled switching in case of defined status changes (e.g. power or network failure) or manual switching via web browser
Numerous notification options in case of malfunctions (via SNMP traps, e-mail and relay control)

Application examples

''USB cable extension'' via Ethernet network
Integration of mass storage devices into the Ethernet network of the production environment, e.g. to store collected sensor data or videos locally
Remote access to camera-based monitoring and inspection solutions
Remote access of distributed, dongle-supported multifactor security solutions
Remote access to measuring...
SEE OFFER SEE OFFER ebay

LCS PS112 - Longshine print server, 3 ports, USB/parallel

Comparison of Similar Products