KEMO M 180 - Marten repeller, waterproof, IP 65*
37.81 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
... for use in cars, houses and attics. Generates enormously loud pulsating ultrasonic sounds. Can be mounted to the car's entry holes
* IP 65: no ingress of dust in the event of a partial vacuum of 20 mbar in the enclosure. Protected against water spray from any direction against the housing (equivalent to 12.5 ltr/minute ... garden hose), (test period: 5 minutes).
Technical data
Operating voltage 11 - 15 V/DC
Power consumption: < 2 mA
Ultrasonic frequency approx. 23 kHz pulsing
Dispersion angle approx. 160°
Sound-pressure levels approx. 105 dB (± 20%)
Dimensions approx. 58 x 38 x 31 mm (without mounting brackets)
EAN: 4024028031804
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
... for use in cars, houses and attics. Generates enormously loud pulsating ultrasonic sounds. Can be mounted to the car's entry holes
* IP 65: no ingress of dust in the event of a partial vacuum of 20 mbar in the enclosure. Protected against water spray from any direction against the housing (equivalent to 12.5 ltr/minute ... garden hose), (test period: 5 minutes).
Technical data
Operating voltage 11 - 15 V/DC
Power consumption: < 2 mA
Ultrasonic frequency approx. 23 kHz pulsing
Dispersion angle approx. 160°
Sound-pressure levels approx. 105 dB (± 20%)
Dimensions approx. 58 x 38 x 31 mm (without mounting brackets)
EAN: 4024028031804
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
These sounds are not audible to men.
The basic device is waterproof according to *IP65 and may also be mounted outside. The connected plug power supply has to be inserted into a socket in a dry place.
Technical Data
Operating voltage 230 V/AC 50 Hz approx. 0.6 W ±25% (plug power supply)
Cable length basic device - plug power supply approx. 2 m
Frequency approx. 22.5 - 28 kHz. Constantly varying and without interruption, in the most effective range not audible to men
Acoustic pressure up to 120 dB ±20%
Optical deterrence Brightly flashing LED approx. every 2.5 sec.
Range of action up to approx. 100 m² open area
Dimensions basic device approx. 70 x 50 x 40 mm (without fastening clips + cable entry)
waterproof according to *IP65
Dimensions plug power supply (not waterproof) approx. 60 x 44 x 38 mm (without plug attachment)
This discreet Plug & Shine light pole with a height of 360 mm is a real eye-catcher on walkways and driveways. It sets glare-free light accents, serves for orientation and lets the way to the house shine in a pleasant warm white light. The IP protection indicates how well a luminaire is protected against water penetration. With IP protection 44, the light pole is splash-proof, this allows it to be used on the house or under the roof.
- 24 V bollard light
- LED light source (permanently installed) included
- Colour temperature: 3000 K - warm white
- Combinable with all accessories from the Plug & Shine series
- Don't forget: Order the matching transformer at the same time!
The transparent SimpLED outdoor complete set with a length of 5 meters creates a decorative light around the house. Whether in the garage, on the balcony or under the roof overhang, the strips create pleasant indirect light. The complete set incl. plug-in transformer can be used immediately, ''Plug & Play''. Thanks to RGB technology, the colour can be individually adjusted using the remote control. The integrated memory effect saves the last colour setting when you turn it off. The minimum component size due to the integrated receiver in the strip facilitates installation. The coating provides protection against dust and splashing water.
- IP protection: IP65 - water jet-proof
- Colour change (RGB)
- Ready-to-use set including 230/24 V power supply with cable and mains plug
- Flexible material for mounting on flat or curved surfaces
- Simple plug-in system for trouble-free installation
- Cannot be extended
- Cannot be combined with YourLED and MaxLED strips
The cover screws, which are secured against falling out, are screwed into high-quality threaded bushings.
PCBs can be securely attached via screw domes in the lower part.
Hue light gray similar to RAL 7035
Impact resistance IK07 according to IEC 62262
Degree of protection IP65 DIN 60529
The cover screws, which are secured against falling out, are screwed into high-quality threaded bushings.
PCBs can be securely attached via screw domes in the lower part.
Hue light gray similar to RAL 7035
Impact resistance IK07 according to IEC 62262
Degree of protection IP65 DIN 60529
It creates a flexible light line without visible LED points. The ready-to-plug-in complete set is suitable for lighting e.g. at the carport, under the roof overhang or at the terrace. Due to the high number of LEDs and the robust silicone coating, the stripe creates a continuous band of light. The coating provides protection against dust and splash water.
- Ready-to-use set including 230 / 24 V power supply with feed line and mains plug
- Colour temperature: 3000 K - warm white
- IP protection: IP65 - jet water protected
- Non-expandable
- Flexible material for mounting on flat or curved surfaces
- not combinable with YourLED and MaxLED strips
It creates a flexible light line without visible LED points. The ready-to-plug-in complete set is suitable for lighting e.g. at the carport, under the roof overhang or at the terrace. The stripe creates a continuous light band due to the high number of LEDs and the robust silicone coating. The coating offers protection against dust and splash water.
- ready-to-use set including 230 / 24 V power supply with supply line and mains plug
- colour temperature: 3000 K - warm white
- IP protection: IP65 - jet water protected
- flexible material for mounting on flat or curved surfaces
- simple plug-in system for easy mounting
- not expandable
- cannot be combined with YourLED and MaxLED strips
New industrial enclosure in ABS with/without moulded-on wall plates
The ABS enclosures achieve IP66/IP68 protection with the foamed gasket
EUROMAS X enclosures have a recessed surface for mounting membrane keyboards or display panels.
The cover screws, which are secured against falling out, are screwed into high-quality threaded bushes.
- PCBs can be securely fastened via screw domes in the lower part.
- Impact resistance IK 07 according to IEC 62262
- Material: Enclosure material ABS, foamed-in gasket
Package Contents:
- upper and lower part
- cover screws
Technical data:
Operating voltage 12 - 15 V/DC (car battery)
Average power consumption < 5 mA
Automatic shut-off, if the battery voltage falls below 11.5 V (± 5%)
Output voltage: approx. 200 - 300 V/DC
Ultrasonic frequency approx. 22 kHz (± 10%)
Sound pressure max. approx. 100 dB (± 15%)
Ultrasonic dispersion angle approx. 150°
Speaker ceramic-special-Piezo speaker with aluminium spherical membrane
Temperature range approx. -40 to +80°C
Function display flashing LED (approximately every 5 - 12 sec)
Base unit dimensions: 46 x 73 x 145 mm (H x W x D)
High voltage cable length 2 x approx. 1.9 m (± 10%)
Fuse in the fuse holder 500 mA
High-voltage contact plates 6 pcs: each about 40 x 40 x 1.5 mm
If cable for terminal 15 is connected to ''plus'',
the marten repeller switches off. If it is connected
to ''Minus'' or does not receive any signal,
the marten repeller switches on.
The generator frequency can be adjusted between 8 - 40 kHz. There is a built-in special loudspeaker with vaulted aluminium spherical membrane for a better sound distribution. Commissioning also requires a stabilised power supply 12 V/DC (< 60 mA).
Technical data:
Operating voltage 12 V / DC (10 to 13.8 V / DC)
Energy consumption approx.< 60 mA
Adjustable frequency approx. 8 - 40 KHz (± 15%)
Frequency deviation, approx. 2 x per second approx. 2 - 3 kHz (automatic frequency change, siren-like)
Sound pressure up to 100 dB (±15 %) (ultrasonic devices should have sound pressure level of over 100 dB(C), in order to prevent habituation (result: ADAC test). (Source de.wikipedia.org/wiki/Marderabwehr)
Range > 40m in free field of vision
Speaker opening angle max. 140°
Possibility to connection additional Piezo speakers max. 4 pcs possible
Function display flashing LED
Connection via cable
Dimensions approx. 72 x 50 x 33 mm (without mounting brackets)
With the free Nedis SmartLife app, you can adjust the colour and brightness or set up multi-coloured patterns from anywhere via a connection to your home Wi-Fi network.
Set schedules and automations or control this LED strip and other Nedis SmartLife products with your voice (works with Google Home or Amazon Alexa).
- Unique uniform rubber cap and gasket design for more reliable protection and easier installation with device bezel
- Certified IP65 water protection when mated with the corresponding REAN IP65 connector or with covered rubber cap
- UL94 V-0 rated materials
50 meter long LED flex neon light strips in cold white (6000 K) with flexible design by OPTONICA. It is ideal for additional lighting or decoration. It has a beam angle of 120 °. In addition, the LED light strip is protected against water and dust (IP65) and can also be used outdoors.
Features:
- voltage: 12V
- beam angle: 120 °
- light color: cool white (6000 K)
- lumens per meter: 300 lm / m
- LEDs: 120 SMD / m
- degree of protection: IP65
- length: 50 m
- dimensions: 16 x 8 mm
- The colour temperature you want: Thanks to the unique CCT function, you can adjust the colour temperature of the LED strip individually. Choose between warm-white light for cosy evenings or cool-white light for a concentrated working environment.
- Outdoor applications: Thanks to the IP65 waterproof rating, the LED strip can easily be used in outdoor areas without worrying about dust or splash water.
- Easy to install: The self-adhesive strip can be easily attached to virtually any smooth surface. You can create atmospheric lighting in your home or business without needing complicated tools or additional aids.
- Versatility and flexibility: At a length of 5 metres, the LED strip gives you more than you need. In addition, the strip can be cut every 10 cm to perfectly adapt it to your needs.
50 meter long LED flex neon light strip in blue with a flexible design by OPTONICA. It is ideal for additional lighting or decoration. It has a beam angle of 120 °. In addition, the LED light strip is protected against water and dust (IP65) and can also be used outdoors.
Features:
- voltage: 12V
- beam angle: 120 °
- light color: blue
- lumens per meter: 300 lm / m
- LEDs: 120 SMD / m
- degree of protection: IP65
- length: 50 m
- dimensions: 16 x 8 mm
- Weather resistant to IP65: Protected against water spray and dust - ideal for outdoor areas, construction sites and adverse conditions.
- Can be shortened in 20 cm intervals: it adapts precisely to any area without unnecessary extensions.
- Expandable up to 70 m: use the connector supplied to extend your light strip quickly.
- Homogeneous illumination: 180 LED/m and 180° beam angle produce an even, easily visible green line.
- Ready-to-use straight from the box: EU plug and light strip drum for fast, mobile use without additional installation.
- Made for low and high temperatures: reliable operation from -20°C to +40°C for year-round use.
- Durable and robust: PVC version with service life of up to 30,000 h for low maintenance.
- ToF FoV (field of view): 60° horizontal, 45° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 6.5 cm
- Detection range: 2 - 6.5 m
- Detection rate: up to 99.8%
- Mounting height: 6.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
Boasting an impressive accuracy of up to 99.8% people counting, this sensor fully meets your requirements.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Power supply: DC 12V/2A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): 3.76 W
- Memory: up to 1 million records, supports export as CSV
50 meter long LED flex neon light strips in warm white (2800 K) with a flexible design by OPTONICA. It is ideal for additional lighting or decoration. It has a beam angle of 120 °. In addition, the LED light strip is protected against water and dust (IP65) and can also be used outdoors.
Features:
- voltage: 12V
- beam angle: 120 °
- light color: warm white (2800 K)
- lumens per meter: 300 lm / m
- LEDs: 120 SMD / m
- degree of protection: IP65
- length: 50 m
- dimensions: 16 x 8 mm
- Field of view (FoV): 98° horizontal, 80° vertical
- Accuracy: <3.5 cm
- Detection range: 0.5 ~ 3.5 m
- Detection rate: up to 99.8%
VS135 is a high-end people counting sensor based on second-generation deep learning AI and ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
This sensor boasts impressive counting accuracy of up to 99.8% to meet your requirements and offers exceptional performance for both indoor and outdoor applications.
- ToF FoV (field of view): 60° horizontal, 45° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 6.5 cm
- Detection range: 2 - 6.5 m
- Detection rate: up to 99.8%
- Mounting height: 6.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
Boasting an impressive accuracy of up to 99.8% people counting, this sensor fully meets your requirements.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Power supply: DC 12V/2A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): 3.76 W
- Memory: up to 1 million records, supports export as CSV
- ToF FoV (field of view): 98° horizontal, 80° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 3.5 cm
- Detection range: 0.5 - 3.5 m
- Detection rate: up to 99.8%
- Mounting height: 3.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Power supply: DC 12V/2A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): 3.76 W
- Memory: up to 1 million records, supports export as CSV
- Weatherproof & ready to use: IP65-rated for reliable lighting in rain, dust and harsh environments - ideal for outdoor use.
- Homogeneous brightness per metre: 180 LED/m provide a uniform light pattern without hard shadows - ideal for precise work.
- Neutral white for a clear view: 5000 K supports high-contrast, natural vision on work surfaces.
- Scalable up to 70 m: Can be expanded via connectors - adapts to growing projects and larger areas.
- Individually customisable: Adjustable every 20 cm - light exactly where it's needed, without compromise.
- Robust and durable: PVC sheath, -20 to +40°C temperature range and 30,000 h service life for sustainable performance.
With this digital RGB LED Stripe, it is possible to control each LED individually. For this purpose there is a single IC on the Stripe for each LED, type: WS2801.
In our tests this chipset was supported by Boblight under Raspbmc ''out-of-the-box'', so that the construction of a dynamic TV backlight (as shown in figure 2) is possible with this Stripe.
In addition, the Stripe is cast with a silicon layer and is therefore also suitable for outdoor installation. The 3M adhesive layer on the back guarantees simple and safe installation.
Technical data:
IC type: WS2801
LED type: RGB
LED housing: 5050
Number of LEDs: 32 / per metre
Number of ICs: 32 / per metre
Operating voltage: 5 V / DC
Power consumption: 2 A / per metre
Power: 10 W / per metre
IP code: IP65 / cast & splash water-proof
Operating temperature: -20 - +50°C
Lighting strip colour: white
Self-adhesive: yes, 3M adhesive layer
Divisible: yes, every 3 cm
Width: 14 mm
Height: approx. 4 mm
Cable feed 45° from the top, plug direction 45° downwards.
A width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels // when mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate.
This has to be connected to the equipotential bonding of the building by means of a bonding terminal. A cover protects the module against direct contact.
If mounted in distributor panels with protective insulation, protection class II is guaranteed. In this case, it is necessary to remove the equipotential bonding spring.
Integrated dust protection cover is also available colored.
With splice cassette
The integrated splice tray enables clean routing of the individual fibers for optimal transmission of lightwave signals. In addition, the cassette is perfect for mechanical splicing and fusion splicing.
IP65 dust and waterproof
The distribution box has two cable entries and 25 cable outlets that are protected with a rubber seal. The seals provide a watertight seal to the housing for the feed-through of fiber optic cables indoor and outdoor. A gland can also be inserted on the front side of the housing to feed through another cable.
Specification
- Fiber optic distribution box for FTTH applications
- 24 slots for SC Simplex or LC Duplex couplings
- Wall mounting
- Lockable
- With splice cassette
- Cable entries and outlets
- Suitable for indoor and outdoor use
- Protection class: IP65
- Environmental temperature: -40 °C ~ 75 °C
- Housing colour: grey
- Housing material: ABS
- Dimensions (LxWxH): ca. 330 x 270 x 100 mm
Package content
- Fiber optic distribution box
- 1 x key
- Mounting material
- Plastic tube
- 24 x heat shrink splice protection
Package
- White Box
- ToF FoV (field of view): 60° horizontal, 45° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 6.5 cm
- Detection range: 2 - 6.5 m
- Detection rate: up to 99.8%
- Mounting height: 6.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Multi-device stitching: up to four-device stitching to extend coverage
- Data retransmission: support for 8 x 50,000 data retransmission packets
- Power supply: 802.3 at PoE+ or DC 12 V/2 A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): 4.12 W
- Memory: up to 1 million records, supports export as CSV
- ToF FoV (field of view): 60° horizontal, 45° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 6.5 cm
- Detection range: 2 - 6.5 m
- Detection rate: up to 99.8%
- Mounting height: 6.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Multi-device stitching: up to four-device stitching to extend coverage
- Data retransmission: support for 8 x 50,000 data retransmission packets
- Power supply: 802.3 at PoE+ or DC 12 V/2 A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): 4.12 W
- Memory: up to 1 million records, supports export as CSV
- ToF FoV (field of view): 98° horizontal, 80° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 3.5 cm
- Detection range: 0.5 - 3.5 m
- Detection rate: up to 99.8%
- Mounting height: 3.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Multi-device stitching: up to four-device stitching to extend coverage
- Data retransmission: support for 8 x 50,000 data retransmission packets
- Power supply: 802.3 at PoE+ or DC 12 V/2 A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): 4.55 W
- Memory: up to 1 million records, supports export as CSV
- Weatherproof & ready to use: IP65-rated for reliable lighting in rain, dust and harsh environments - ideal for outdoor use.
- Homogeneous brightness per metre: 180 LED/m provide a uniform light pattern without hard shadows - ideal for precise work.
- Neutral white for a clear view: 5000 K supports high-contrast, natural vision on work surfaces.
- Scalable up to 70 m: Can be expanded via connectors - adapts to growing projects and larger areas.
- Individually customisable: Adjustable every 20 cm - light exactly where it's needed, without compromise.
- Robust and durable: PVC sheath, -20 to +40°C temperature range and 30,000 h service life for sustainable performance.
- ToF FoV (field of view): 98° horizontal, 80° vertical
- ToF light beam: 940 nm (invisible)
- Measurement accuracy: = 3.5 cm
- Detection range: 0.5 - 3.5 m
- Detection rate: up to 99.8%
- Mounting height: 3.5 m
The VS135 is a high-end people counting sensor based on deep learning AI and second generation ToF technology.
It can adapt to a variety of complex scenarios while ensuring excellent privacy protection.
- Bi-directional people counting: up to four detection lines for bi-directional counting
- U-Turn filtering: filters out redundant counts of people in the capture zone
- Regional counting and long-term residence detection: up to four detection zones with ten decagons each
- Group counting: supported
- Differentiation between children/adults: supported
- Multi-device stitching: up to four-device stitching to extend coverage
- Data retransmission: support for 8 x 50,000 data retransmission packets
- Power supply: 802.3 at PoE+ or DC 12 V/2 A
- Wi-Fi: IEEE 802.11 b/g/n, 2.4 GHz (AP mode for configuration)
- Power consumption (auto light mode): 4.55 W
- Memory: up to 1 million records, supports export as CSV
PC enclosures (also in UL 94 V0) are suitable for outdoor use (f1 listing according to UL 746C)
Factory fitted round cord seal (material Neoprene CR)
The cover screws, which are secured against falling out, are screwed into high-quality threaded bushings
The housing can be mounted on the wall using the screw channels in the lower part
Large working surfaces and versatile mounting options for connectors, switches and buttons
Impact resistance IK 07 according to IEC 62262
Temperature resistance +100° C
Circuit boards can be securely fastened via screw domes in the lower part
Scope of delivery: upper and lower part,cover screws made of V2A,self-shaping screws for the mounting cams
PC enclosures (also in UL 94 V0) are suitable for outdoor use (f1 listing according to UL 746C)
Factory fitted round cord seal (material Neoprene CR)
The cover screws, which are secured against falling out, are screwed into high-quality threaded bushings
The housing can be mounted on the wall using the screw channels in the lower part
Large working surfaces and versatile mounting options for connectors, switches and buttons
Impact resistance IK 07 according to IEC 62262
Temperature resistance +100° C
Circuit boards can be securely fastened via screw domes in the lower part
Scope of delivery: upper and lower part,cover screws made of V2A,self-shaping screws for the mounting cams
It creates a flexible light line without visible LED points. The ready-to-plug-in complete set is suitable for lighting e.g. at the carport, under the roof overhang or at the terrace. The stripe creates a continuous band of light thanks to the high number of LEDs and the robust silicone coating. The coating provides protection against dust and splash water.
- IP protection: IP65 - jet-proof
- Colour temperature: 6500 K - daylight white
- Simple plug-in system for easy installation
- Ready-to-use set including 230 / 24 V power supply with supply cable and mains plug
- Not extendable
- Flexible material for mounting on flat or curved surfaces
- Not combinable with YourLED and MaxLED strips
The light object Ivo provides glare-free lighting accents along access routes. Driveways and paths are uniformly illuminated for greater safety. Rustproof, waterproof and dustproof, it provides warm white light in all weather conditions.
- IP protection: IP65 - water jet-proof
- For 230-V direct connection
- LED illuminant (permanently installed) included
- Colour temperature: 3000 K - warm white
PC enclosures (also in UL 94 V0) are suitable for outdoor use (f1 listing according to UL 746C)
Factory fitted round cord seal (material Neoprene CR)
The cover screws, which are secured against falling out, are screwed into high-quality threaded bushings
The housing can be mounted on the wall using the screw channels in the lower part
Large working surfaces and versatile mounting options for connectors, switches and buttons
Impact resistance IK 07 according to IEC 62262
Temperature resistance +100° C
Circuit boards can be securely fastened via screw domes in the lower part
Scope of delivery: upper and lower part,cover screws made of V2A,self-shaping screws for the mounting cams
