KEMO M 161 - Ultrasound power cannon
34.71 EUR
Access the complete sheet with information, compare prices and discover the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
High-performance ultrasound pulse generator with speaker
... to scare away wild animals such as martens, wild boars, deer, etc. from gardens, from fields etc. The speaker emits pulse-like ultrasonic sounds which can have an acoustic range of up to 300 m with an attached pipe (not included)!
Technical data
Operating voltage 12 - 14.4 V/DC
Power consumption max. 150 mA
Frequency approx. 22 kHz (inaudible for the human ear)
Frequency curve Sine
Pulse duration approx. 0.5 sec.
Pulse sequence approx. 5 sec.
Display LED flashes for connected speaker when emitting a pulse
Speaker output for Piezo speakers
From the enclosed L010, a maximum of 2 units can be operated in parallel (1 speaker included).
Dimensions approx. 60 x 46 x 20 mm (without mounting brackets)
EAN: 4024028031613
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
High-performance ultrasound pulse generator with speaker
... to scare away wild animals such as martens, wild boars, deer, etc. from gardens, from fields etc. The speaker emits pulse-like ultrasonic sounds which can have an acoustic range of up to 300 m with an attached pipe (not included)!
Technical data
Operating voltage 12 - 14.4 V/DC
Power consumption max. 150 mA
Frequency approx. 22 kHz (inaudible for the human ear)
Frequency curve Sine
Pulse duration approx. 0.5 sec.
Pulse sequence approx. 5 sec.
Display LED flashes for connected speaker when emitting a pulse
Speaker output for Piezo speakers
From the enclosed L010, a maximum of 2 units can be operated in parallel (1 speaker included).
Dimensions approx. 60 x 46 x 20 mm (without mounting brackets)
EAN: 4024028031613
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
KEMO M 174 - Solar charger Dual, 16 A
33.21 EUR
"Is connected between the solar panel 12 V and 1 or 2 batteries to prevent overcharging If 2 batteries are connected, they will be charged separately. The battery with the lowest charge voltage receives more charging current. With LED displays + high loading capacity: max. 2 x 8 A or 1 x 16 A.Technical data:
Input voltage solar panels 15 - 30 V/DC open circuit voltage, 12 V/DC rated voltage
Max. Charging current 16 A total (2 batteries a max. 8 A each or 1 battery connected in parallel at both outputs up to 16 A)
Ports 1 or 2 batteries, 12 V/DC If only 1 battery is connected, it must be connected to port ""2"".
Displays: each battery displays ""Battery charging"", 1 display
Cooling For currents> 4 A, the metal underside of the module must be screwed on to a heat sink with a surface area of > 300 square cm.
Fuse A back-up fuse of F16 A is required (not included)
Switch-on battery voltage approx. < 13.4 V/DC (± 5%)
Switch-off voltage ""Battery full"" approx. 14.4 V/DC (± 5%)
Current consumption (taken from the battery) < 2 mA
Reverse-current-proof (no additional diode required)
Connection with 6.35-mm flat plug sleeves
Dimensions: approx. 87 x 60 x 32 mm"
KEMO M 234 - Marten - Rat - Mouse Repeller
48.14 EUR
For indoor and outdoor use with aggressive ultrasound. Produces enormously loud, sinusoidal ultrasound, which martens, etc. find very annoying and the animals try to avoid if possible. These sounds are not audible to men.
The basic device is waterproof according to *IP65 and may also be mounted outside. The connected plug power supply has to be inserted into a socket in a dry place.
Technical Data
Operating voltage 230 V/AC 50 Hz approx. 0.6 W ±25% (plug power supply)
Cable length basic device - plug power supply approx. 2 m
Frequency approx. 22.5 - 28 kHz. Constantly varying and without interruption, in the most effective range not audible to men
Acoustic pressure up to 120 dB ±20%
Optical deterrence Brightly flashing LED approx. every 2.5 sec.
Range of action up to approx. 100 m² open area
Dimensions basic device approx. 70 x 50 x 40 mm (without fastening clips + cable entry)
waterproof according to *IP65
Dimensions plug power supply (not waterproof) approx. 60 x 44 x 38 mm (without plug attachment)
KEMO M 186 - Marten repeller for motor vehicles 12 - 15 V/DC
61.62 EUR
"... drives out martens by electrically charged high-voltage plates (at 200 - 300 V/DC) in the engine compartment which give the animal an electric shock (only weak current pulses that chase the marten away and do not kill it) and by strong, aggressively pulsating ultrasonic sounds Very low power consumption (<0.005 A), automatically turns off when the battery voltage is at <11.5 V/DC (does not fully drain the battery when the car is parked for a longer period of time). Technical data:
Operating voltage 12 - 15 V/DC (car battery)
Average power consumption < 5 mA
Automatic shut-off, if the battery voltage falls below 11.5 V (± 5%)
Output voltage: approx. 200 - 300 V/DC
Ultrasonic frequency approx. 22 kHz (± 10%)
Sound pressure max. approx. 100 dB (± 15%)
Ultrasonic dispersion angle approx. 150°
Speaker ceramic-special-Piezo speaker with aluminium spherical membrane
Temperature range approx. -40 to +80°C
Function display flashing LED (approximately every 5 - 12 sec)
Base unit dimensions: 46 x 73 x 145 mm (H x W x D)
High voltage cable length 2 x approx. 1.9 m (± 10%)
Fuse in the fuse holder 500 mA
High-voltage contact plates 6 pcs: each about 40 x 40 x 1.5 mm
If cable for terminal 15 is connected to ""plus"",
the marten repeller switches off. If it is connected
to ""Minus"" or does not receive any signal,
the marten repeller switches on."
KEMO M 028N - Power 110 - 240 V/AC, 4000 VA
38.85 EUR
For controlling resistive + inductive loads (e.g. motors, heaters, etc., if these can be controlled in phase angle control).
Technical data
• Operating voltage 110 - 240 V/AC
• Load capacity at 110 V/AC max. 2000 VA and at 230 V/AC max. 4000 VA
• Max. Load 18 A when mounted on a heat sink
• Without additional heat sink max. 6 A (peak max. 25 A / 10 sec.)
Control phase angle
• Connectable loads resistive + inductive loads (see circuit description)
• Dimensions 87 x 60 x 33 mm (with mounting base)
Including a potentiometer for control.
Work under mains voltage is dangerous to life and may only be carried out by persons trained in electrical engineering.
KEMO M 171 - PWM power controller, 9 - 28 V/DC, 10 A
38.44 EUR
Power controller to regulate DC loads (DC motors, light bulbs, heaters, LEDs with series resistors, etc.). Even electric motors with low speeds run well thanks to the PWM (pulse width) control. • Operating voltage 9 - 28 V/DC
• Max. current carrying capacity 5 A or 10 A (if the module is screwed on a cooling plate)
• Control range approx. < 5% to > 95%
• Control type: PWM pulse width control with a frequency between 10 - 20 kHz
• Potentiometer 4.7k lin (included)
• Dimensions: approx. 87 x 60 x 33 mm (with fastening base)
Permissible loads DC motors, light bulbs, heaters, LEDs with series resistors. Each up to max. 10-A power consumption.
KEMO M 158 - Water sensor, 9 - 12 V/DC
21.27 EUR
"If the 2 sensor connections on the module come into contact with water, the built-in relay switches on. This allows sirens and other cut-off relays to be controlled.Technical data
Operating voltage 9 V/DC ideal (max. 12 V/DC), (please only use a stabilised power supply).
Power consumption ""Ready"" < 10 mA Coming into contact with water, when the relay picks up < 90 mA at 9 V/DC
LED displays 1 LED for the ready display ""POWER"", 1 LED for the ""ON"" display, when the relay switches on
Connections via cable
Approved cable length to the water sensors max. 5 m with conventional cable, max. 100 m with shielded cable, if the shielding mesh is connected to the negative terminal from the supply voltage
Moulded module housing dimensions approx. 59 x 44 x 20 mm (without mounting brackets)"
KEMO M 122 - Twilight switch 12 V/DC
23.24 EUR
The twilight switch switches on e.g. lights at dusk and off again at daybreak. (For holiday homes with generator power supply, yachts, caravans etc.) switch output: relay 1x UM max 3 A.The light intensity sensitivity can be modified by partially covering the sensor mechanically.
Technical data
Operating voltage 12 V / DC (11 to 14 V/DC)
Power consumption approx. 2 mA/35 mA (relay on/off)
Relay contact 1 x UM, load capacity max. 25 V/3 A
Working temperature range approx. -15 to +50°C
Switch-on light intensity approx. 25 Lux ± 20%
Switch-off light Intensity approx. 45 Lux ± 20%
Switching delay approx. 3 - 4 seconds
Dimensions approx. 72 x 50 x 32 mm (without mounting brackets)
KEMO M 015N - Adjustable voltage converter, 3 - 15 V DC, 1.5 A
23.14 EUR
• Max. 1.5 A• Input: 6...28 V/DC
• Output: 3 - 15 V DC
The input voltage must be at least 3 V higher than the output voltage setting. The set output voltage is stabilised and short-circuit proof. The operation of equipment with lower voltages on a 12-V or 24-V car battery or with power supplies.
• Max. power dissipation: 3 W without heat sink, 10 W with heat sink (not included)
• Dimensions approx. 60 x 45 x 20 mm (without mounting brackets)
KEMO M 176 - Marten repeller IP65 for motor vehicles 12 - 15 V/DC
82.25 EUR
"... drives out martens by electrically charged high-voltage plates (at 200 - 300 V/DC) in the engine compartment which give the animal an electric shock (only weak current pulses that chase the marten away and do not kill it) and by strong, aggressively pulsating ultrasonic sounds Very low power consumption (<0.005 A), automatically turns off when the battery voltage is at <11.5 V/DC (does not fully drain the battery when the car is parked for a longer period of time). * IP 65 = no ingress of dust with a vacuum pressure of 20 mbar in the enclosure, protected against water spray from any direction on the housing (equivalent to 12.5 ltr. /minute e.g. garden hose, trial period 5 minutes, information subject to change).
Technical data:
Features
Waterproof 3-fold effectiveness: ultrasound, electric shock, pulsating light.
Seal
The control unit with the speaker is waterproof in line with IP65* (can be mounted to the car's entry holes)
Operating voltage
12 - 15 V/DC (car battery)
Average power consumption
< 5 mA
Power On
Soft-start, so that the on-board computer is not disturbed.
Automatic switch-off
If the battery voltage falls below 11.5 V (± 5%)
Output voltage
approx. 200 - 300 V DC
Ultrasonic frequency
approx. 22 kHz ± 10%
Sound pressure
max. approx. 100 dB ± 20% (ultrasonic devices should have a sound pressure level
of over 100 dB(C), in order to prevent habituation (result: ADAC test). (Source de.wikipedia.org/wiki/Marderabwehr)
Ultrasonic dispersion angle
Approx. 160°
Speakers
Structural-borne sound emitter which makes the top of the housing vibrate (waterproof)
Sound
Sine, aggressive pulsing
Temperature Range
Approx. -25 to +80°C
Function display
Flashing LED (approximately every 5 - 12 sec)
High voltage cable length
Approx. 4 m (± 10%)
Fuse in the fuse holder
F500 mA
High-voltage contact plates
6 pieces, movable, each approx. 62 x 42 mm
Base unit dimensions
Approx. 40 X 50 x 70 mm (without cable entry + mounting feet)
Cable for terminal 15
If this cable is connected with ""plus"", the marten repeller switches off. If it is connected with ""minus"" or does not receive a signal, the marten repeller switches on.
CAN data bus
Suitable for vehicles with CAN data bus.
Voltage spikes
The device is protected against voltage spikes in the on-board network to 40 V (< 20 ms).
Optical deterrent
The built-in pulsing LED also confuses nocturnal martens.
Why has the device does not change in frequency?
Martens and other small predators emit short intense warning cries, not siren sounds! Our marten repeller emits these tones in a life-like manner and is thus the perfect method for deterring martens."
KEMO M 106 - Module, stepper motor interface, 4-pin
27.23 EUR
For controlling a 4-branch stepper motor4 ... 18V, max. 2 A. The power supply is a
Dual power supply (split power supply) is required.
The motor can either be manually controlled via
keyboard or a previously written
program.
Supplied with software.
Dimensions: 120x50x24 mm
KEMO "M 032S - Universal amplifier 12 W ""Plug & Play"""
30.06 EUR
Amplifier module with connectors for the signal input and power supply. Built-in volume control, speaker connection via cable.
• Operating voltage 6 - 16 V/DC
• Power consumption max. 800 mA
• Input sensitivity < 80 mV
• Speaker connection: 4 - 16 ohms
• Music output up to 12 W at 16 V/DC at a 4-ohm speaker
• Frequency response 40 - 20,000 Hz
• Power supply socket for mains plug 2.5 mm
• Dimensions approx. 72 x 50 x 42 mm (without mounting brackets)
KEMO M 172N - Bicycle Power Charge Controller USB
43.66 EUR
Allows the connection of mobile phones, navigators, PDAs, MP3-players, etc. to a bicycle dynamo. The charge controller has an USB-A jack. It is thus possible to use many charging cables of various devices. A charging cable with micro USB plug is enclosed. In addition this charge controller is especially powerful: input voltage up to max. 70 V (may occur with hub dynamos at very high speeds). Output: 5 V max. 800 mA (if your dynamo can produce this output, otherwise the current is lower: max. approx. 500 mA). Technical Data
Input 6 V bicycle dynamo (also suitable for 6 V hub dynamos, which may supply up to 70 V at high speeds)
Output via USB-A jack approx. 5 V stabilized (±5 %) max. 500 mA with a normal dynamo or 800 mA with a more powerful dynamo
Switch installed change-over switch for charging operation USB jack or bicycle light (both at the same time is not allowed)
LED display lights up during the USB charging operation.
Fastening with cable straps at the handlebar
Connecting cable USB-A to micro USB is enclosed
The regulator may also be operated at accumulators of electric bicycles 24 – 36 V
Dimensions approx. 70 x 62 x 42 mm (without switch)