KEMO M 094N - Marten stopper module

Prodotto
30.57 EUR Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.

Generates strong, pulsating ultrasonic sounds,
perceived by martens and other rodents
as annoying thus allowing you
to scare these animals away.
This module includes 4 small Piezo ultrasonic
speakers to ensure a good distribution of the
ultrasonic sounds.
Tone frequency: adjustable.

Operating voltage: 12...15 V =
Power consumption: at 12 V< 0,05 A
Speaker output: only for Piezo speakers
Tone frequency: adjustable 10 ... 40 kHz (+/-20%)
Piezo speaker dimensions: approx. Ø30 mm x 13 mm
Module dimensions: 75 x 45 x 28 mm

EAN: 4024028030944
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new

Comparison of Similar Products

KEMO M 148 - Module 148A, battery monitor 12V KEMO M 148 - Module 148A, battery monitor 12V 26.54 EUR This battery saver protects your car battery
from total discharge by the timely switching off
consumers such as
cool boxes, seat heaters, radios,
marten repellers, etc. When the
supply voltage level is reached
these are automatically switched on again.
Cut-off voltage: 10.4 ... 13.3 V (adjustable)
Reactivation voltage: approximately 0.8 V (+/- 0.3 V) higher than cut-off voltage
Switching capacity: max. 10 A (20 A with cooling)
Dimensions: 87x60x32 mm
The device is designed to monitor devices, which are connected to the cigarette lighter socket (such as fridges, etc.)
The earth of this module must be used as the earth for these devices and not the vehicle's earth as this module switches the earth!
KEMO M 100N - Car ultrasonic marten repeller KEMO M 100N - Car ultrasonic marten repeller 23.34 EUR ... for use in cars, houses and attics. Generates enormously loud pulsating ultrasonic sounds.

... generates aggressive ultrasonic sound not audible for the human ear, but perceived as exceptionally annoying by martens and is thus avoided. Fitted in the car's engine compartment.
Ultrasonic marten repeller for use in cars, houses and attics. Generates exceptionally loud, pulsating ultrasonic sounds using a special dome tweeter.

Technical data
Operating voltage 11 - 15 V/DC
Power consumption: < 2 mA
Frequency approx. 23 kHz
Dispersion angle approx. 140°
Transmission power max. approx. 100 dB (± 20%)
Dimensions approx. 72 x 50 x 28 mm (without mounting brackets)
KEMO M 069N - Underground mole and vole repeller KEMO M 069N - Underground mole and vole repeller 32.64 EUR In quick intervals, this waterproof module generates aggressive seismic vibrations that spread in the ground well and are avoided to a greater extent by voles, moles and similar rodents. The module is buried close to animal burrows and supplied with an operating voltage of 9 V/DC. A module is sufficient for maximum 1,000 m² of garden.

Technical data:
Operating voltage 9 V/DC
Power consumption max. 100 mA
Range max. 1000 m²
Dimensions approx. 72 x 50 x 35 mm

Power supply unit is not included in the scope of delivery (see accessories)
KEMO M 032S - Universal amplifier 12 W Plug & Play KEMO "M 032S - Universal amplifier 12 W ""Plug & Play""" 30.06 EUR Amplifier module with connectors for the signal input and power supply.
Built-in volume control, speaker connection via cable.

• Operating voltage 6 - 16 V/DC
• Power consumption max. 800 mA
• Input sensitivity < 80 mV
• Speaker connection: 4 - 16 ohms
• Music output up to 12 W at 16 V/DC at a 4-ohm speaker
• Frequency response 40 - 20,000 Hz
• Power supply socket for mains plug 2.5 mm
• Dimensions approx. 72 x 50 x 42 mm (without mounting brackets)
KEMO M 031N - Universal amplifier 3.5W, 4.5 - 12 V KEMO M 031N - Universal amplifier 3.5W, 4.5 - 12 V 21.28 EUR Rugged amplifier module for universal use.
The module is cast to be moisture and vibration-resistant. The sealing compound and module housing consists of a special highly thermal conductive plastic. Therefore, no additional heat sink required.
The module is electronically protected against overheating and overload.

Technical data
• Operating voltage 4.5 - 12 V/DC
• Power output max 3.5 W (music output)
• Speaker connection: 4 - 16 ohms
• Input sensitivity < 80 mV
• Frequency response 40 - 20,000 Hz
• Dimensions approx. 40 x 40 x 12 mm (without mounting brackets)
KEMO M 063 - Dimmer, 12V, 50W, module KEMO M 063 - Dimmer, 12V, 50W, module 28.2 EUR Controls 12 V/AC motors (even DC motors with an upstream rectifier), light bulbs, heaters, etc. Only for operation on a 12 V/AC transformer (50 - 60 Hz), not for DC (Battery). By replacing the potentiometer, it is possible to regulate voltages such as 24 V/AC or 48 V/AC.
Operating voltage 12 V/AC, 50 - 60 Hz (only for conventional iron-core transformers, not electronic transformers)
If the enclosed potentiometer is replaced by 100-K-lin potentiometer, you can also regulate 24 V/AC, or a 220-K-lin potentiometer is required for 48 V/AC (not included)
Operating principle phase control
Control range approx. 0 - 90%
Load capacity for ohmic and inductive loads up to 10 A (for cooling) or max 4 A without additional cooling e.g. AC motors, light bulbs, heaters, transformers, etc.
Dimensions approx. 87 x 60 x 33 mm (with fastening base)
KEMO M 150 - DC and pulse converter module KEMO M 150 - DC and pulse converter module 28 EUR This module allows the dimmer modules M012 and M028 to be controlled
with a direct currents or pulse-width controller
(e.g. from PCs). It will is connected to the modules instead of the
potentiometer Galvanic isolation control circuit via opto-couplers.

Control voltage: 1 - 5 VDC/3 - 12 VDC/6 - 24 VDC
Or TTL rectangular pulses 5V 1 - 10KHz
PWM pulse width 10 - 90%
KEMO M 106 - Module, stepper motor interface, 4-pin KEMO M 106 - Module, stepper motor interface, 4-pin 27.23 EUR For controlling a 4-branch stepper motor
4 ... 18V, max. 2 A. The power supply is a
Dual power supply (split power supply) is required.
The motor can either be manually controlled via
keyboard or a previously written
program.
Supplied with software.
Dimensions: 120x50x24 mm
KEMO M 013N - Twilight switch 240 V/AC KEMO M 013N - Twilight switch 240 V/AC 22.34 EUR This electronic twilight switch connects automatically by means of an installed relay lamps (e.g. energy saving lamps) or other consumers at nightfall and off again at daybreak. The module may also work the other way round: on at daybreak (for advertising displays, fountains etc.) and off at nightfall. Floating loads up to 3 A may be switched.

Technical Data
Operating voltage 210 - 240 V/AC
Current consumption < 40 mA
Switching contact (floating) 1 x switchover max. load 3 A (resistive load) max. 1 A (inductive load)
Turn-on brightness approx. 10 Lux ± 50%
Turn-off brightness approx. 60 Lux ± 50%
Delay in reaction approx. 30 sec. ± 50%
Temperature range approx. -15°C - +40°C
Dimensions approx. 70 x 60 x 23 mm (without fastening straps)
KEMO M 234 - Marten - Rat - Mouse Repeller KEMO M 234 - Marten - Rat - Mouse Repeller 48.14 EUR For indoor and outdoor use with aggressive ultrasound. Produces enormously loud, sinusoidal ultrasound, which martens, etc. find very annoying and the animals try to avoid if possible.

These sounds are not audible to men.

The basic device is waterproof according to *IP65 and may also be mounted outside. The connected plug power supply has to be inserted into a socket in a dry place.

Technical Data
Operating voltage 230 V/AC 50 Hz approx. 0.6 W ±25% (plug power supply)
Cable length basic device - plug power supply approx. 2 m
Frequency approx. 22.5 - 28 kHz. Constantly varying and without interruption, in the most effective range not audible to men
Acoustic pressure up to 120 dB ±20%
Optical deterrence Brightly flashing LED approx. every 2.5 sec.
Range of action up to approx. 100 m² open area
Dimensions basic device approx. 70 x 50 x 40 mm (without fastening clips + cable entry)
waterproof according to *IP65
Dimensions plug power supply (not waterproof) approx. 60 x 44 x 38 mm (without plug attachment)
KEMO M 158 - Water sensor, 9 - 12 V/DC KEMO M 158 - Water sensor, 9 - 12 V/DC 21.27 EUR "If the 2 sensor connections on the module come into contact with water, the built-in relay switches on. This allows sirens and other cut-off relays to be controlled.

Technical data
Operating voltage 9 V/DC ideal (max. 12 V/DC), (please only use a stabilised power supply).
Power consumption ""Ready"" < 10 mA Coming into contact with water, when the relay picks up < 90 mA at 9 V/DC
LED displays 1 LED for the ready display ""POWER"", 1 LED for the ""ON"" display, when the relay switches on
Connections via cable
Approved cable length to the water sensors max. 5 m with conventional cable, max. 100 m with shielded cable, if the shielding mesh is connected to the negative terminal from the supply voltage
Moulded module housing dimensions approx. 59 x 44 x 20 mm (without mounting brackets)"
KEMO M 073N - Motorcycle alarm KEMO M 073N - Motorcycle alarm 16.1 EUR Automatically activates a horn or a siren when the bike is moved out of the parking position
Waterproof and shockproof encapsulated module. Also suitable for securing other objects that are not to be moved.

Technical data
Switching tilt angle approx. 12 to 20° in all directions
Switching capacity, max. 25 V/DC max. 1 A
KEMO M 083 - Battery charging regulator, 12 V KEMO M 083 - Battery charging regulator, 12 V 21.22 EUR This module monitors the charge state of a
12-V car battery and automatically recharges
when the battery voltage drops to 13.8 volts.
When the battery is fully charged (14.2 V), the module switches
off the charging process and monitors the batter.
Suitable for batteries in alarm systems, holiday
homes, caravans, etc.
Input voltage: 16 - 20 V
Output current: 0 - 1.5 A
Dimensions: 71x46x20 mm
KEMO M 161 - Ultrasound power cannon KEMO M 161 - Ultrasound power cannon 34.71 EUR High-performance ultrasound pulse generator with speaker

... to scare away wild animals such as martens, wild boars, deer, etc. from gardens, from fields etc. The speaker emits pulse-like ultrasonic sounds which can have an acoustic range of up to 300 m with an attached pipe (not included)!

Technical data
Operating voltage 12 - 14.4 V/DC
Power consumption max. 150 mA
Frequency approx. 22 kHz (inaudible for the human ear)
Frequency curve Sine
Pulse duration approx. 0.5 sec.
Pulse sequence approx. 5 sec.
Display LED flashes for connected speaker when emitting a pulse
Speaker output for Piezo speakers
From the enclosed L010, a maximum of 2 units can be operated in parallel (1 speaker included).
Dimensions approx. 60 x 46 x 20 mm (without mounting brackets)
KEMO M 171 - PWM power controller, 9 - 28 V/DC, 10 A KEMO M 171 - PWM power controller, 9 - 28 V/DC, 10 A 38.44 EUR Power controller to regulate DC loads (DC motors, light bulbs, heaters, LEDs with series resistors, etc.). Even electric motors with low speeds run well thanks to the PWM (pulse width) control.

• Operating voltage 9 - 28 V/DC
• Max. current carrying capacity 5 A or 10 A (if the module is screwed on a cooling plate)
• Control range approx. < 5% to > 95%
• Control type: PWM pulse width control with a frequency between 10 - 20 kHz
• Potentiometer 4.7k lin (included)
• Dimensions: approx. 87 x 60 x 33 mm (with fastening base)

Permissible loads DC motors, light bulbs, heaters, LEDs with series resistors. Each up to max. 10-A power consumption.
KEMO M 087 N - LED tester, module KEMO M 087 N - LED tester, module 23.34 EUR With this test module, you can test wired LEDs for function, brightness, colour and polarity.
There are two adjacent test sockets with the same currents (5 mA/10mA) to facilitate the selection LEDs of equal brightness.
Required: 9V-battery

Dimensions: 60 x 82 x 24 mm
KEMO M 180 - Marten repeller, waterproof, IP 65* KEMO M 180 - Marten repeller, waterproof, IP 65* 37.81 EUR ... for use in cars, houses and attics. Generates enormously loud pulsating ultrasonic sounds. Can be mounted to the car's entry holes
* IP 65: no ingress of dust in the event of a partial vacuum of 20 mbar in the enclosure. Protected against water spray from any direction against the housing (equivalent to 12.5 ltr/minute ... garden hose), (test period: 5 minutes).

Technical data
Operating voltage 11 - 15 V/DC
Power consumption: < 2 mA
Ultrasonic frequency approx. 23 kHz pulsing
Dispersion angle approx. 160°
Sound-pressure levels approx. 105 dB (± 20%)
Dimensions approx. 58 x 38 x 31 mm (without mounting brackets)
KEMO M 186 - Marten repeller for motor vehicles 12 - 15 V/DC KEMO M 186 - Marten repeller for motor vehicles 12 - 15 V/DC 61.62 EUR "... drives out martens by electrically charged high-voltage plates (at 200 - 300 V/DC) in the engine compartment which give the animal an electric shock (only weak current pulses that chase the marten away and do not kill it) and by strong, aggressively pulsating ultrasonic sounds Very low power consumption (<0.005 A), automatically turns off when the battery voltage is at <11.5 V/DC (does not fully drain the battery when the car is parked for a longer period of time).

Technical data:
Operating voltage 12 - 15 V/DC (car battery)
Average power consumption < 5 mA
Automatic shut-off, if the battery voltage falls below 11.5 V (± 5%)
Output voltage: approx. 200 - 300 V/DC
Ultrasonic frequency approx. 22 kHz (± 10%)
Sound pressure max. approx. 100 dB (± 15%)
Ultrasonic dispersion angle approx. 150°
Speaker ceramic-special-Piezo speaker with aluminium spherical membrane
Temperature range approx. -40 to +80°C
Function display flashing LED (approximately every 5 - 12 sec)
Base unit dimensions: 46 x 73 x 145 mm (H x W x D)
High voltage cable length 2 x approx. 1.9 m (± 10%)
Fuse in the fuse holder 500 mA
High-voltage contact plates 6 pcs: each about 40 x 40 x 1.5 mm
If cable for terminal 15 is connected to ""plus"",
the marten repeller switches off. If it is connected
to ""Minus"" or does not receive any signal,
the marten repeller switches on."
KEMO M 176 - Marten repeller IP65 for motor vehicles 12 - 15 V/DC KEMO M 176 - Marten repeller IP65 for motor vehicles 12 - 15 V/DC 82.25 EUR "... drives out martens by electrically charged high-voltage plates (at 200 - 300 V/DC) in the engine compartment which give the animal an electric shock (only weak current pulses that chase the marten away and do not kill it) and by strong, aggressively pulsating ultrasonic sounds Very low power consumption (<0.005 A), automatically turns off when the battery voltage is at <11.5 V/DC (does not fully drain the battery when the car is parked for a longer period of time).

* IP 65 = no ingress of dust with a vacuum pressure of 20 mbar in the enclosure, protected against water spray from any direction on the housing (equivalent to 12.5 ltr. /minute e.g. garden hose, trial period 5 minutes, information subject to change).

Technical data:
Features
Waterproof 3-fold effectiveness: ultrasound, electric shock, pulsating light.
Seal
The control unit with the speaker is waterproof in line with IP65* (can be mounted to the car's entry holes)
Operating voltage
12 - 15 V/DC (car battery)
Average power consumption
< 5 mA
Power On
Soft-start, so that the on-board computer is not disturbed.
Automatic switch-off
If the battery voltage falls below 11.5 V (± 5%)
Output voltage
approx. 200 - 300 V DC
Ultrasonic frequency
approx. 22 kHz ± 10%
Sound pressure
max. approx. 100 dB ± 20% (ultrasonic devices should have a sound pressure level
of over 100 dB(C), in order to prevent habituation (result: ADAC test). (Source de.wikipedia.org/wiki/Marderabwehr)
Ultrasonic dispersion angle
Approx. 160°
Speakers
Structural-borne sound emitter which makes the top of the housing vibrate (waterproof)
Sound
Sine, aggressive pulsing
Temperature Range
Approx. -25 to +80°C
Function display
Flashing LED (approximately every 5 - 12 sec)
High voltage cable length
Approx. 4 m (± 10%)
Fuse in the fuse holder
F500 mA
High-voltage contact plates
6 pieces, movable, each approx. 62 x 42 mm
Base unit dimensions
Approx. 40 X 50 x 70 mm (without cable entry + mounting feet)
Cable for terminal 15
If this cable is connected with ""plus"", the marten repeller switches off. If it is connected with ""minus"" or does not receive a signal, the marten repeller switches on.
CAN data bus
Suitable for vehicles with CAN data bus.
Voltage spikes
The device is protected against voltage spikes in the on-board network to 40 V (< 20 ms).
Optical deterrent
The built-in pulsing LED also confuses nocturnal martens.
Why has the device does not change in frequency?
Martens and other small predators emit short intense warning cries, not siren sounds! Our marten repeller emits these tones in a life-like manner and is thus the perfect method for deterring martens."