JOY-IT DEBO THUMB JOY - Developer boards - joystick module
13.62 EUR
Access the complete sheet with information, compare prices and discover the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
"Joystick module for various developer boards
With this board, the X and Y position of the joystick can be displayed as analogue voltage on the output pins.
The module can be firmly soldered or used on a breadboard.
EAN: 4250236816845
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"Joystick module for various developer boards
With this board, the X and Y position of the joystick can be displayed as analogue voltage on the output pins.
The module can be firmly soldered or used on a breadboard.
- Voltage range: 0 - 5 V
- Operating voltage: 3.3 V
- Dimensions: 34 x 39 x 26 mm
EAN: 4250236816845
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
JOY-IT DEBO USB-PD 2 - Developer Boards - USB-PD Trigger Module, USB-C to USB-A
20.8 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: USB-A
• Dimensions (LxWxH): 31.5 x 15 x 14 mm
Note• USB-C power supply not included in delivery
JOY-IT DEBO USB-PD 1 - Developer Boards - USB-PD Trigger Module, USB-C to Terminal Bloc
20.8 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: screw terminal block
• dimensions (LxWxH): 31.5 x 15 x 14 mm
Note• USB-C power supply not included in delivery
JOY-IT DEBO LCD 20X4 - Developer Boards - Display LCD 20x4, HD44780
17.81 EUR
20x4 LCD module with 16 pin headerThis 20x4 character LCD is best suited for your project.
It works with the common HD44780 controller chip and has a green backlight.
It has a 16 pin connector and can be used as a built-in or plug-on display. For this purpose, a corresponding solderable pin header is included in the scope of delivery.
Specifications
• Display size: 20 characters x 4 lines
• supply voltage: 4.7 - 5.3 V
• logic level: 5 V
• LCD controller: HD44780
• backlight: 5V DC LED backlight
• green backlight
• 16-pin pin header
• dimensions (LxWxH): 98,3 x 60 x 14 mm
Scope of delivery
• 20x4 LCD module
• 16 pin male header
JOY-IT DEBO POE ADAPT 2 - Developer Boards - POE USB-C Power Adapter
19.36 EUR
"With this adapter you can power your Raspberry Pi and other single board computers, which are powered by a USB-C port, via POE LAN.The adapter is connected directly to a POE-capable router/switch or POE injector with a POE LAN cable (up to 100 meters cable length).
This allows you to use the Raspberry very flexibly and no power outlet and power supply is required.
- Connections: 1x USB-C plug, 1x RJ45 jack, 1 x RJ45 plug
- Input voltage: 36 - 57 V (standard PoE voltage 48 V, 52 V)
- Output voltage: DC 5 V
- Output current: 2 A
- Transmission distance: 10 - 100 m
- PoE Protocol: IEEE802.3af
- Network bandwidth: 10/100 Mbps
- Operating temperature: -50 to +75°C
- Dimensions: 82 x 28 x 23 mm
JOY-IT DEBO FAN 303010 - Developer boards - fan, 30 x 30 x 10 mm
13.46 EUR
This 30 x 30 mm fan with Dupont socket connection can be used for single board computers such as the Raspberry Pi.Technical data
- Connection: 10 cm cable with 2x1 Dupont socket connection
- Voltage: 5 V
- Current: 7 mA
- Revolutions: 7,516 RPM
- Dimensions (LxWxH): 30 x 30 x 10 mm
JOY-IT DEBO UART2RS232 - Developer boards - UART-RS232 transceiver, incl. pin header
13.36 EUR
"The COM-TTL-RS232 transceiver is the ideal solution to enable seamless communication between UART interfaces and RS232 serial ports. This compact module is designed for reliable and bidirectional data transmission and is ideal for use in industrial, communication and control applications.
Main features
- Bidirectional signal conversion: Easily converts data signals between UART and RS232, enabling interaction between modern microcontrollers and legacy devices.
- Easy integration: Compact design and included pin header make it easy to use in your projects.
- Reliability through SP3232E chipset: High stability and efficiency for your applications.
- Flexible use: Supports logic levels from 3 V to 5.5 V and supply voltages of 3 V / 5 V.
Technical data
- Chipset: SP3232E
- Supply voltage: 3 V - 5 V
- Logic level: 3 V / 5 V
- Communication direction: Bidirectional
- Dimensions: 43 x 15 x 3 mm
- Weight: Only 3 g
Scope of delivery
- 1x UART - RS232 transceiver module (COM-TTL-RS232)
- 1x pin header (not soldered)
JOY-IT ARC JOYSTICK - Arcade Joystick for all popular developer boards
20.91 EUR
The Arcade Joystick from Joy-IT is robust and a true all-rounder.Whether you want to use your Raspberry Pi to emulate an arcade machine or control a robot arm, the Arcade Joystick provides faithful service.
Thanks to its high-quality microswitches, it can withstand even heavy-duty use. It is switchable between 8, 4 and 2 ways, and can be quickly and easily integrated into your project.
JOY-IT DEBO PIR MOTION - Developer Boards - PIR Motion Sensor, BIS0001
14.07 EUR
"Sensor PIR Motion SensorThe sensor on this module is a pyroelectric infrared sensor that detects movement in the detection area of the Fresnel lens and then outputs a ""HIGH"" signal at the sensor output pin ""SIG"" for 3 seconds. Afterwards the signal changes back to the ""LOW"" state. The soldered potentiometer is used for continuous range adjustment. With the help of this module and a microcontroller such as Raspberry Pi or Arduino, it can be used for safety systems or automation, for example.
• Supply voltage: 3 ... 5 V
• Module interface: 4 pins
• Module Detector Chip: BIS0001
• Detection angle: 120
• Detection range: 3 meters (max. 6 meters)
• infinitely variable detection range via potentiometer
• compatible with Raspberry Pi, Arduino, other SBC
• Dimensions (LxWxH): 21 x 40 x 19 mm"
SOLDERED DEBO RTC - Developer boards - Real-time clock - RTC, PCF85063A
16.31 EUR
"The RTC (Real Time Clock) is a device that tracks time and date accurately and precisely. Due to its high precision, it is better suited for long-term time tracking than the clocks on microcontrollers.- compatible with Arduino (or a compatible board such as Dasduino)
- extremely low power consumption
- integrated battery holder
- alarm function and interrupt pin
- uninterrupted time tracking even in the event of a power failure
The RTC (Real Time Clock) is characterized by its high accuracy, which makes it particularly suitable for applications where long-term time tracking is required. It is compatible with Arduino (or a compatible board such as Dasduino) and can be operated with extremely low power consumption. Thanks to the integrated battery holder, time tracking is maintained even in the event of a power failure. The alarm function and interrupt pin allow a microcontroller to go into sleep mode and only be reactivated when an alarm is triggered by the RTC.
The built-in battery holder (battery not included) ensures that real-time tracking is not affected even in the event of a power failure.
Technical data
- Communication: I2C
- RTC IC: PCF85063A
- Voltage: 0.9 V ... 5,5 V
- easyC/Qwiic compatibility
- Dimensions: 38 x 22 mm
The RTC offers a precise and reliable solution for long-term time tracking in applications that require accurate time recording. It is compatible with common microcontroller boards and ensures efficient and continuous time tracking thanks to its low power consumption and alarm function.
easyC
easyC is a robust connection system that optimizes the connection using JST-SH compatible connectors (JST 4-pin) of microcontrollers, sensors and actuators. It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ""Data sheets"".
External links
https://github.com/SolderedElectronics/Soldered-PCF85063A-RTC-Module-Arduino-Library"
WAVESHARE "DEBO EPA 2.9 - Developer boards - 2.9"" E Ink display, black/white"
30.31 EUR
This is an E-Ink display module with integrated controller and communication via SPI interface. Due to the advantages such as extremely low power consumption, wide viewing angle, great effect in sunlight, it is an ideal choice for many different applications.Special features
no backlight, displays the last content for a long time even after switching off
ultra-low power consumption, basically power is only required for refreshing
SPI interface, to connect to other controller boards such as Raspberry / Arduino / Nucleo etc.
comes with development resources and manual (examples for Raspberry Pi / Arduino / STM32)
Technical data
• Operating voltage: 3.3V
• Interface: 3-wire SPI, 4-wire SPI
• Outline dimensions: 89.5 × 38 mm
• Display size: 66.89 × 29.05 mm
• Dot pitch: 0.226 × 0.227
• Resolution: 296 × 128
• Display color: black, white
• Grayscale: 4
• Power reserve: 26.4 mV (typ.)
• Standby power: <0,017 mV
• Betrachtungswinkel:> 170°
Scope of delivery
• Display module
• Connection cable XH2.54 20 cm 8-pin
Documentation / Downloads
http://www.waveshare.com/wiki/2.9inch_e-Paper_Module
WAVESHARE "DEBO EPA 2.7 - Developer boards - 2.7"" E Ink display, black/white"
29.43 EUR
"This is an E Ink display HAT for Raspberry Pi with integrated controller and communication via SPI interface. Benefits including extremely low power consumption, wide viewing angle and high effectiveness in sunlight make it an ideal choice for many different applications.Features
- No background illumination, displays last content for a long time after switch-off
- Ultra-low power consumption, power is basically only needed to refresh
- 4 buttons on board
- Compatible with Raspberry Pi 2B/3B/Zero/Zero W/WH
- SPI interface for connecting to other controller boards such as Raspberry/Arduino/Nucleo etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Technical data
- Operating voltage: 3.3 V
- Interface: 3-wire SPI, 4-wire SPI
- Dimensions: 85 mm x 56 mm
- Display size: 57.288 mm x 38.192 mm
- Dot pitch: 0.217 x 0.217
- Resolution: 264 x 176
- Display colour: black, white
- Grey level: 2 full
- Update time: 6 s
- Energy reserve: 24 mW (typical)
- Standby power: <0.017 mW
- Viewing angle: >170°
Included in delivery
- Display HAT
- 2 screws
Documentation/downloads
https://www.waveshare.com/wiki/2.7inch_e-Paper_HAT"
WAVESHARE "DEBO EPA 2.9 RD - Developer boards - Display E-Ink, 2,9"", black/white/red"
32.64 EUR
This is an E-Ink display module with integrated controller and communication via SPI interface. Due to the advantages such as extremely low power consumption, large viewing angle, large effect in sunlight, it is an ideal choice for many different applications.special features
no backlight, displays the last content for a long time, even after switching off the device
ultra-low power consumption, basically power is only needed for refreshing
SPI interface, for connection to other controller boards like Raspberry / Arduino / Nucleo etc.
comes with development resources and manual (examples for Raspberry Pi / Arduino / STM32)
Technical data- operating voltage: 3,3V
- Interface: 3-wire-SPI, 4-wire-SPI
- Outline dimension: 89.5 × 38 mm
- Display size: 66.89 × 29.05 mm
- Point spacing: 0.138 × 0.138
- Resolution: 296 × 128
- Display colour: black, white, red
- Grayscale: 2
- full update time: 15s
- Energy reserve: 26.4 mV (typ.)
- Standby power: 170°.<0,017 mV
• Betrachtungswinkel:>
Scope of delivery
- Display Module
- Connecting cable XH2.54 20 cm 8-pin
Documentation / Downloads
https://www.waveshare.com/wiki/2.9inch_e-Paper_Modules_(B)
JOY-IT DEBO RB-BB 2B - Developer boards - Laboratory card, 165 x 54 mm, black
12.64 EUR
Lab card from Joy-it for the developer board areaWelcome to the world of electronic prototypes, where innovation and reliability meet! Our high-quality breadboard is the ideal tool for all your electronics projects.
Whether you are an experienced electronics expert or a beginner, our breadboard is designed to optimize your prototyping experience.
With precise plug-in holes and universal compatibility, it allows you to connect electronic components securely and effortlessly. This allows you to implement your ideas quickly and reliably.
Specifications
• 1 contact terminal with 630 contacts
• 2 distribution terminals with 200 contacts
• Material: plastic
• Color: black
• Adhesive surface on the underside
• Dimensions (LxWxH): 165 x 54 x10 mm
WAVESHARE "DEBO EPA 1.54 - Developer boards - 1.54"" E Ink display, black/white"
24.94 EUR
"This is an E Ink display module with integrated controller and communication via SPI interface. Benefits including extremely low power consumption, wide viewing angle and high effectiveness in sunlight make it an ideal choice for many different applications.Features
- No background illumination, displays last content for a long time after switch-off
- Ultra-low power consumption, power is basically only needed to refresh
- SPI interface for connecting to other controller boards such as Raspberry/Arduino/Nucleo etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Technical data
- Operating voltage: 3.3 V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimensions: 48 mm x 33 mm
- Display size: 27.6 mm x 27.6 mm
- Dot pitch: 0.138 x 0.138
- Resolution: 200 x 200
- Display colour: black, white
- Grey level: 2
- Partial update time: 0.3 s
- Full update time: 2 s
- Energy reserve: 26.4 mW (typical)
- Standby power: <0.017 mW
- Viewing angle: >170°
Included in delivery
- Display module
- 20-cm, 8-pin connecting cable XH2.54
Documentation/downloads
http://www.waveshare.com/wiki/1.54inch_e-Paper_Module"
JOY-IT DEBO HEATSINK2 - Development boards - active fan 20 x 20 mm
17.29 EUR
The Heatsink-2 is an active fan for single-board computers and other electronic projects. The fan, which measures just 2 x 2 cm, is virtually silent and is compatible with the Raspberry Pi, Banana Pi and many other single-board computers.
Thanks to its self-adhesive underbody, it can also easily be used for other cooling applications in electronics and modelling.
SOLDERED DEBO LED 8X8 GN - Developer boards - LED module, 8x8 SMD, green
15.43 EUR
"The 8×8 LED matrix is an arrangement of 64 LEDs that are controlled by the MAX7219 LED driver. This arrangement makes it possible to display light patterns according to programming. The module is mounted on a single plate, which facilitates its use and integration into various projects.- uses the MAX7219 LED driver for control
- enables the display of letters, symbols and text
- modules can be easily connected to each other
- offers the option of controlling several matrices simultaneously
- uses 0402 LEDs for fine and effective light displays
The LED matrix 8×8 is characterized by high adaptability and easy expandability. Users can seamlessly connect several of these modules together, making it possible to create larger and more complex display systems. The use of very small 0402 LEDs provides an aesthetic visual effect that is particularly striking in darker environments. The modules are designed to have a uniform appearance when placed side by side, as if they were made from one piece. This supports a clean and professional design in applications.
Technical data
- Voltage: 4.0 ... 5,5 V
- Driver: MAX7219
- Color: green
- Dimensions: 54 x 22 mm
In conclusion, the LED matrix 8×8 enables a versatile and visually appealing implementation in digital display projects thanks to its technological features and modular design. It is ideal for users who want to enrich their environments with dynamic and customizable lighting effects.
External links
https://soldered.com/productdata/2022/03/8x8-LED-matrix-Purple-MAX7219-board.webp
https://github.com/SolderedElectronics/Soldered-8x8-MAX7219-LED-Matrix-Arduino-Library
https://github.com/SolderedElectronics/8x8-LED-matrix-Purple-MAX7219-board-hardware-design"
JOY-IT DEBO SD-NAND 512 - Developer boards - 512 MB SD-NAND flash memory
23.28 EUR
This flash memory module allows you to store and read data externally via the SPI interface of your microcontroller.The module is controlled exactly like a conventional SD card and is therefore particularly simple. The module can be operated with 3.3 V as well as 5 V thanks to the integrated voltage converter.
Specifications• Operating voltage: 3 ... 5 V
• logic level: VCC
• Interface: SPI
• memory size: 512 MB
• clock frequency: up to 50 MHz
WAVESHARE DEBO SOLAR 5W - Developer boards - solar panel, 5 W.
23.49 EUR
Solar panel, 6 V / 5 W, with 3.5 x 1.35 mm hollow plug• Solar cell type: 156 monocrystalline cell
• Surface: tempered glass
• Frame material: aluminium alloy with anodic oxidation
• Back panel material: 0.25 mm PET
• Power: 5.0 W ± 5%.
• Operating voltage: 6.0 V ± 5%.
• Operating current: 833 mA ± 5%.
• Open circuit voltage: 7.2 V ± 5%.
• Short circuit current: 916 mA ± 5%.
• Connection: Hollow plug 3.5 x 1.35 mm (+ inside / - outside)
• Dimensions (LxWxH): 230 x 195 x 16.5 mm
SOLDERED DEBO GAS4 MQ135 - Developer boards - Gas sensor, CO2/petrol/smoke, MQ-135
17.29 EUR
"The MQ135 sensor has a wide range of applications in indoor air quality monitoring, gas leak detection and environmental detection. In addition to carbon dioxide (CO2), it also detects other gases such as volatile organic compounds (VOCs), alcohol vapors and smoke. By integrating with circuits and microcontrollers such as Arduino (or a compatible board such as Dasduino), real-time systems can be developed to track and analyze gas levels. This allows appropriate action to be taken to ensure a healthy and safe environment.
The MQ135 module requires a preheating time before accurate readings are available. It operates at 5 V and consumes approximately 150 mA.
The breakout of the MQ135 sensor provides both digital and analog data that can be retrieved via the easyC system.
Technical data
- Measure: max. ammonia (NH3),CO2, alcohol, benzene, smoke
- Voltage: 3.3 V
- Output: digital
- ATTiny404 microcontroller
- easyC/Qwiic compatibility
- Dimensions: 54 x 22 mm
easyC
easyC is a robust connection system that optimizes the connection of microcontrollers, sensors and actuators using JST-SH compatible connectors (JST 4-pin). It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ""Data sheets"".
External links
https://github.com/SolderedElectronics/Air-quality-sensor-MQ135-breakout-with-easyC-hardware-design"
ADAFRUIT DEBO PWR SOLAR1 - Developer boards - Charger for Li-Ion / LiPo batteries, USB/DC/S
32.64 EUR
"Li-Ion and LiPo battery charger for use with solar panels- Charging with a 5-6 VDC, USB or 6 V solar panel
- automatic charge current detection for highly efficient use of solar panels with any wattage
- three color signal lamps-LEDs
- Battery warning display with LED output
- Set for maximum charging rates of 500 mA
- temperature monitoring
ADAFRUIT DEBO BOOST 1000 - Developer Boards - Powerboost 1000 Charger, TPS61090
35.74 EUR
"This small format DC/DC boost converter module can be powered by any 3.7 V Li-Ion / LiPo battery and converts battery power to 5.2 V DC to keep your 5 V projects running.- charging current: max. 1000 mA
- with low-battery detection
- 2 A internal switch
- Dimensions: 22 x 37 x 7 mm
SOLDERED DEBO GAS3 MQ2 - Developer boards - gas sensor, gas & smoke, MQ-2
14.07 EUR
"MQ sensors, including the MQ2 sensor, are capable of detecting various gases. The MQ2 sensor is specifically designed to detect combustible gases such as liquefied petroleum gas (LPG), butane, propane, methane, alcohol, hydrogen and smoke. These gases are commonly found in residential, industrial and automotive environments. The sensor's sensitivity and responsiveness allow it to detect even small amounts of these gases, making it a valuable tool for gas leak detection, fire detection and air quality monitoring. It takes a short time to warm up in order to function correctly.
The breakout board works with both digital (DO) and analog (AO) signals. The digital output signal is obtained by setting a threshold value with a potentiometer. The analog output signal varies depending on the intensity of the gas.
Technical data
- Voltage: 5 V
- digital output: 0 V / 5 V
- analog output: 0 .. 5 V
- LM393 comparator
- Dimensions: 22 x 38 mm
External links
https://github.com/SolderedElectronics/Butane--LPG---Smoke-sensor-MQ2-breakout-hardware-design"
JOY-IT DEBO DCDC 20W - Developer boards - Voltage regulator 20 W, DC/DC converter, XL60
14.07 EUR
"XL6019 Converter module with voltage regulator (step-up)Powerful DC/DC converter with adjustable voltage regulator (XL6019). Ideal for simple and universal voltage adjustment.
- Input voltage: 5 ... 35 V
- Output voltage: 5 ... 40 V
- steplessly adjustable
- max. output current: 1.5 A
- max. output power: 20 W
- efficiency: up to 94
- built-in thermal overload shutdown
- built-in soft-start function
ADAFRUIT DEBO SOUND AMP1 - Developer Boards - Audio Amplifier, Class D, PAM8302A
15.43 EUR
"This super small mono amplifier is surprisingly powerful. It can deliver up to 2.5 watts for speakers with 4-8 ohms impedance.- filterless design with ferrite bead and capacitors from the output
- supply voltage: 5 V
- fixed 24 dB gain
- onBoard trimming potentiometer for controlling the input volume
- Protection against thermal overload, short-circuit and overcurrent
- Dimensions: 24 x 15 x 2 mm
JOY-IT DEBO CAN-485 - Raspberry Pi Pico - Expansion board with CAN + RS485
26.28 EUR
This expansion board allows you to add an RS485 and a CAN interface to a Raspberry Pi Pico. The board can be operated either via a standard USB-C connection with 5 V or via a screw terminal that accepts an input voltage of 6 to 12 V.
The voltage applied to the screw terminal is reduced to 5 V by an integrated voltage converter.
Specifications
• Interface CAN: SPI, CAN
• Interface RS485: Serial RS485
• Supply voltage: USB-C 5 V DC / screw terminal 6-12 V DC
• Logic level 3.3 V
• Terminating resistor CAN: 120 Ohm (can be deactivated if required)
• Terminating resistor RS485: 120 Ohm (can be deactivated if required)
Note:The USB-C connection does not transmit any data to the Raspberry Pi Pico
ADAFRUIT DEBO TEMP HUM - Developer Boards - Temperature and Humidity Sensor, SHT31-D
28.04 EUR
"Breakoutboard with Temperature and Humidity Sensor Sensiron SHT31-D- Uses I2C address 0x44 or 0x45
- mitt relative humidity up to ±2%
- Accuracy: ±0.3°C
- 12.7 x 18 x 2.6 mm
SOLDERED DEBO BREAD PWD - Developer boards - Power supply for plug-in boards
17.29 EUR
"A stable power supply unit for breadboard projects offers the option of supplying it with power either via a DC socket or a USB-C connection. The board supplies the breadboard's power supply lines directly with 3.3 V, 5 V or 12 V. The output voltages can be set separately via on-board switches. It also has an LED to indicate operational readiness, an on/off switch and automatic voltage selection if both inputs are used.- Power supply via DC socket or USB-C connection
- Adjustable output voltages: 3.3 V, 5 V, 12 V
- Separate setting of the voltages via switch
- Integrated operational readiness LED and on/off switch
- Automatic voltage selection when using both power sources
The board can be used with Arduino (or a compatible board such as Dasduino), which increases flexibility in various project applications. The use of dual power supply options allows for versatile use in different environments and conditions, whether in the lab or in a mobile setup. The individually adjustable voltages are particularly useful for powering different types of components on a breadboard without the need for additional voltage regulators. User-friendliness is further enhanced by the clear labeling of the switches and the robust design of the board.
Technical data
- USB-C or DC socket
- Voltage at DC socket: 12 V DC
- Output current: 3V3 @ 500 mA, 5V @ 1 A
- Dimensions: 54 x 30 mm
In conclusion, this power supply is a reliable and customizable solution for electronics projects that require a precise power supply. By combining ease of use and technical flexibility, it offers significant added value for developers working with Arduino (or a compatible board such as Dasduino).
External links
https://github.com/SolderedElectronics/Breadboard-power-supply-board-hardware-design"
JOY-IT DEBO USB-PD 3 - Developer boards - USB-PD trigger module, USB-C to solder pads
21.53 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: solder pads (for USB-A or screw terminal)
• dimensions (LxWxH): 31.5 x 15 x 14 mm
Note• USB-C power supply not included in delivery
JOY-IT DEBO USB-PD 4 - Developer boards - USB-PD trigger module, solder pads
16.14 EUR
With this small module, you can trigger USB PowerDelivery protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module as well as via the trigger input. The currently selected voltage can be read from the color of the RGB LED integrated on the module. The module is flexible to use and easy to integrate due to its interfaces and design.Specifications• Output voltage: 5 ... 20 V
• supply voltage: up to 20 V / 100 W
• output current: max. 5 A
• output power: max. 100 W
• input interface: solder pads
• output interface: solder pads
NotePower supply not included
JOY-IT DEBO MOUNT-SET 2 - Developer boards - Breadboard toolkit incl. power module
31.97 EUR
"Breadboard toolkit incl. power module - perfect basis for your electronics projectsThe breadboard toolkit is the ideal solution for beginners and professionals to carry out test setups and electronic experiments with microcontrollers such as Arduino, Raspberry Pi, BBC micro:bit and many more.
This comprehensive set offers everything you need for a successful start in electronics - safely assembled and efficiently operated.
Features at a glance
• Flexible breadboard - With 830 pins, 200 of which are specifically for the power supply, the breadboard offers enough space for your circuits
• Adjustable power module - Supplies your circuits with 3.3 V and 5 V, individually adjustable for each side. In addition, 3.3 V, 5 V and ground are available on separate pins
• High current output - Maximum output power of 700 mA for reliable operation
• Versatile power supply - Can be connected via micro USB, standard USB or DC-IN. The USB ports can also be used to draw power when using DC-IN
• Practical mounting bracket - With various holes to securely attach microcontrollers. Mounting screws are already included in the set
• Complete accessories - Various jumper cables (including adapter for configuration as ""male"") and a high-quality mounting plate round off the set
Simple operation
The power module is simply plugged onto the breadboard and supplies it reliably with power. A switch allows you to conveniently choose between USB and DC-IN power sources, ensuring maximum flexibility.
Scope of delivery
• robust carrying case
• breadboard with 830 pins
• adjustable power module
• jumper cable
• mounting plate
• mounting screws"
JOY-IT DEBO RELAY2 5V - Developer boards - Relay module, 5 V, SRD-05VDC-SL-C
14.6 EUR
"Product description: 5V relay module (COM-RM01)The COM-RM01 5V relay module is a reliable and powerful solution for switching high loads in various applications. It is ideal for industrial control, home automation and DIY projects. With a switching capacity of up to 6 A at 230 V AC or 30 V DC, it can be used for a wide range of applications. With additional cooling, it can even switch 10 A. Thanks to its compact design and simple control via 5 V logic signals, the relay can be easily integrated into existing systems.
Technical data
- Model: COM-RM01
- Function: Relay for switching higher voltages with 5V logic control
- Operating voltage: 5 V DC
- Control connections: VCC, GND, signal
- Load connections: COM, NO, NC
- Maximum load: 6 A / 230 V AC, 6 A / 30 V DC
- Maximum load with cooling: 10 A / 230 V AC, 10 A / 30 V DC
- Dimensions: 27 x 45 x 19 mm
The COM-RM01 is a compact and reliable solution for a wide range of switching applications - ideal for home automation, industrial control systems and DIY projects."
JOY-IT DEBO GAS2 MQ2 - Developer Boards - Gas Sensor, Gas & Smoke, MQ-2
15.11 EUR
This analog gas sensor has a small heating element with an electronic-chemical sensor. It is suitable for use in buildings and can only provide accurate readings once the warm-up phase is complete.Features- compatible with Arduino
- compatible with Raspberry Pi only in combination with art. no. RPI ADC (see accessories)
- 100 - 10000 ppm Measuring range
- high sensitivity (adjustable via potentiometer)
- fast reaction time
- Evaluation of the measured values from the microcontroller (analog)
- Threshold value setting possible (digital)
measurable substances
- liquefied petroleum gas (LPG)
- i-Butane (C4H10)
- propane (C3H8)
- Methane (CH4)
- hydrogen (H2)
- Alcohol
- Smoke
Connections
- VCC: Power supply 5V
- GND: Ground connection
- AOUT: Analog output
- DOUT: Digital output
Dimensions
- L x W x H: 32 x 20 x 22 mm
NoteAttention: The sensor gets warm during operation!
SOLDERED DEBO EASYC 50CM - Developer boards - EasyC cable, 50cm
11.35 EUR
"The easyC system enables easy connection of microcontroller boards, sensors and actuators for fast prototyping without errors. The modules are connected via simple, prefabricated cables. easyC modules have suitable connections for these cables and are based on I2C communication.- easyC compatible cable
- easyC connections at both ends
- Cable length: 50 cm
- simple and error-free connection
- suitable for Arduino (or a compatible board such as Dasduino)
The easyC compatible cable is specially designed for easy integration into the easyC system. It has easyC connectors at both ends and a cable length of 50 cm, which allows flexible handling and installation. The modules' prefabricated cables and socket connectors ensure a reliable and secure connection. The I2C-based communication allows efficient and error-free data transmission between the connected components. This cable is particularly suitable for use with Arduino (or a compatible board such as Dasduino), which extends the versatility and range of applications of the easyC system.
In summary, the easyC compatible cable provides a reliable and efficient solution for connecting microcontroller boards, sensors and actuators in the easyC system, supported by I2C communication."
SOLDERED DEBO LIN 7329SLV - Developer board - LIN Transceiver SLAVE, NCV7329
21.84 EUR
"LIN (Local Interconnect Network) is a serial network protocol used for communication between components in vehicles. It serves as an alternative to the CAN bus and is characterized by a lower speed and the support of a smaller number of simultaneous devices, but also has significantly lower costs. LIN is used for communication between microcontrollers. The operating voltage is 18V.
This breakout has a SLAVE role. Master/slave is a communication model in which one device (master) controls one or more other devices (slave) and the slave then responds to the commands it receives from the master. A master in the LIN protocol can control up to 16 devices.
Technical data
- max. data rate: 20 kbit/s
- max. number of devices: 16
- max. bus length: 40 m
- Voltage: 18 V
- Dimensions: 21.3 x 22.6 x 12.3 mm
external links
https://github.com/SolderedElectronics/LIN-Transceiver-NCV7329-SLAVE-breakout-hardware-design"
IDUINO DEBO DCDC UP 1 - Developer Boards - Voltage Converter, DC/DC, LM2577
14.39 EUR
DC/DC Wandler - LM2577- Step-Up Booster mit Anzeige• Eingangsspannung: 3,5 - 35 V
• Ausgangsspannung: 5,0 - 56 V (Ausgangsspannung > Eingangsspannung!)
• Eingangsstrom: max. 3 A
• Maße: 43 x 30 x 12 mm
JOY-IT DEBO RB-BB 3B - Developer boards - Laboratory card, 84 x 54 mm, black
12.48 EUR
Lab card from Joy-it for the developer board areaWelcome to the world of electronic prototypes, where innovation and reliability meet! Our high-quality breadboard is the ideal tool for all your electronics projects.
Whether you are an experienced electronics expert or a beginner, our breadboard is designed to optimize your prototyping experience.
With precise plug-in holes and universal compatibility, it allows you to connect electronic components securely and effortlessly. This allows you to implement your ideas quickly and reliably.
Specifications
• 1 contact terminal with 300 contacts
• 2 distribution terminals with 100 contacts
• Material: plastic
• Color: black
• Adhesive surface on the underside
• Dimensions (LxWxH): 84 x 54 x10 mm
JOY-IT DEBO DCDC DOWN 6 - Developer boards - voltage regulators, DC/DC converters
18.21 EUR
This voltage converter module can convert input voltages of 9 - 35 V (DC) down to an output voltage of 5 V (DC).Technical features• Step-Down converter with 5 V output
• Input voltage: 9 ... 35 V (DC)
• input current: max. 3.5 A
• output voltage: 5 V (DC)
• output current: max. 5 A
• output power: max. 25 W
• connection: 3 pin screw terminal
• dimensions (LxWxH): 31 x 46 x 19 mm
SOLDERED DEBO ESP CONNECT - Developer boards - ESP8266 / ESP32 Connect
14.5 EUR
"The CONNECT programmer is designed to enable extremely simple programming of boards based on ESP8266 and ESP32 microcontrollers. It contains all the necessary electronics and logic so that programming can be done by connecting a USB cable to the CONNECT programmer and connecting the CONNECT programmer to the programming header. The electronics responsible for the timing and signal sequence are also located on the board so that the ESP microcontroller is put into bootloader mode.
The ESP programming header can be found on boards from Soldered that are based on ESP8266 or ESP32 microcontrollers and do not have a USB-UART converter. However, this programmer can also be used for any other ESP32/ESP8266 board.
Technical data
- IC: CH340
- Pin layout: GPIO0, RESET, RX, TX, 3V3, GND
- LEDs: RX, TX, Power
- USB: USB-C
- Dimensions: 38 x 22 mm
external links
https://github.com/SolderedElectronics/CONNECT-programmer-hardware-design"
ADAFRUIT DEBO USB SERIAL - Developer Boards - USB to Serial Adapter, FT232H
24.21 EUR
"This board is similar to other USB to serial adapters, but additionally includes many common protocols like SPI, I2C, serial UART, JTAG! - FT232H chip and one EEPROM for onboard configuration
- 20x GPIO
- Dimensions: 38 x 23 x 4 mm