JOY-IT DEBO EEPROM 32KB - Developer boards - 32 KB EEPROM module, I2C
13.04 EUR
Access the complete sheet with information, compare prices and discover the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
This EEPROM memory allows you to store and read data externally via the I2C interface of your microcontroller.
The last three digits of the I2C address can be set via jumpers on the board, which makes it possible to use several modules at the same time.
Via an additional jumper the write protection of the module can be activated, whereby the data can only be read.
Specifications
• Supply voltage: 1,8 ... 5,5 V
• Model AT24C256
• logic level: VCC
• Interface: I2C (@1010XXX, 0x50 - 0x57)
• Memory size: 32 KB
• clock frequency: up to 1 MHz
• write cycles: up to 1.000.000
• exchangeable memory chip
EAN: 4250236822884
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
This EEPROM memory allows you to store and read data externally via the I2C interface of your microcontroller.
The last three digits of the I2C address can be set via jumpers on the board, which makes it possible to use several modules at the same time.
Via an additional jumper the write protection of the module can be activated, whereby the data can only be read.
Specifications
• Supply voltage: 1,8 ... 5,5 V
• Model AT24C256
• logic level: VCC
• Interface: I2C (@1010XXX, 0x50 - 0x57)
• Memory size: 32 KB
• clock frequency: up to 1 MHz
• write cycles: up to 1.000.000
• exchangeable memory chip
EAN: 4250236822884
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
JOY-IT DEBO POE ADAPT 2 - Developer Boards - POE USB-C Power Adapter
19.36 EUR
With this adapter you can power your Raspberry Pi and other single board computers, which are powered by a USB-C port, via POE LAN.The adapter is connected directly to a POE-capable router/switch or POE injector with a POE LAN cable (up to 100 meters cable length).
This allows you to use the Raspberry very flexibly and no power outlet and power supply is required.
- Connections: 1x USB-C plug, 1x RJ45 jack, 1 x RJ45 plug
- Input voltage: 36 - 57 V (standard PoE voltage 48 V, 52 V)
- Output voltage: DC 5 V
- Output current: 2 A
- Transmission distance: 10 - 100 m
- PoE Protocol: IEEE802.3af
- Network bandwidth: 10/100 Mbps
- Operating temperature: -50 to +75°C
- Dimensions: 82 x 28 x 23 mm
JOY-IT DEBO PIR MOTION - Developer Boards - PIR Motion Sensor, BIS0001
14.07 EUR
Sensor PIR Motion SensorThe sensor on this module is a pyroelectric infrared sensor that detects movement in the detection area of the Fresnel lens and then outputs a ''HIGH'' signal at the sensor output pin ''SIG'' for 3 seconds. Afterwards the signal changes back to the ''LOW'' state. The soldered potentiometer is used for continuous range adjustment. With the help of this module and a microcontroller such as Raspberry Pi or Arduino, it can be used for safety systems or automation, for example.
• Supply voltage: 3 ... 5 V
• Module interface: 4 pins
• Module Detector Chip: BIS0001
• Detection angle: 120
• Detection range: 3 meters (max. 6 meters)
• infinitely variable detection range via potentiometer
• compatible with Raspberry Pi, Arduino, other SBC
• Dimensions (LxWxH): 21 x 40 x 19 mm
JOY-IT DEBO TTL-RS485 - Developer Board - UART-TTL to RS485 Converter
13.77 EUR
DescriptionThis UART TTL to RS485 converter allows you to add an RS485 interface to your single board computer.
The module is easy to use and is controlled via the UART interface. With up to 1 km transmission range, data transfers with widely spaced devices are no problem.
Its design and size make the module highly integrable. Due to its high immunity to interference, it is particularly often used in industrial areas.
Specifications
• Chip: 74HC04D / Max 485
• operating voltage: 3.3 V / 5 V
• logic level: 3.3 V / 5V
• transmission range: up to 1 km
• temperature range: -40°C ... +85 °C
• dimensions (LxWxH): 43 x 15 x 3 mm
IDUINO DEBO LED FLASH - Developer boards - LED flash module, 7 colours
10.97 EUR
Dieses Modul schafft atemberaubende Farben. Es kann die sieben Farben eines Regenbogens erzeugen und außerdem blinken.Merkmale
• 5 mm LED-Durchmesser
• Linse: weiß diffus
• Spannung: 3,0 - 4,5 V DC
WAVESHARE DEBO PWR SOLAR2 - Developer boards - solar charger for 6- to 24-V panels
20.49 EUR
This solar power management module is designed for 6 to 24V solar panels. It can charge the 3.7V LiPo battery via a solar panel or USB connection and provides a regulated 5V / 1A output.The module has a maximum power point tracking (MPPT) function and multi-protection circuits, so it can still operate highly efficient, stable and safe. It is suitable for solar powered, low power IoT and other environmental protection projects.
• supports MPPT
• supports solar panel / USB port battery charging.
• integrated MPPT SET switch
• two 5 V output interfaces: Pin header and USB connector
• 14500 battery holder and PH2.0 battery connector
• multiple LED indicators to monitor status of solar panel and battery
Technical data
• input voltage of the solar module (SOLAR IN): 6 ... 24 V
bulletpoint# microUSB input voltage (USB IN): 5 V
• pin header / USB output (USB OUT): 5 V / 1 A
• charging end voltage: 4.2 V ±1%
• deep discharge protection voltage: 2.9 V ±1%
• solar module charging efficiency:: approx. 78%
• USB charging efficiency: approx. 82%
• 3.7 V battery boost power efficiency: approx. 86%
• max. quiescent current: < 2 mA
• operating temperature: -40 ... +85°C
• dimensions: 65.2 × 56.2 × 22.9 mm
Documentation and downloads can be found here:
www.waveshare.com/wiki/Solar_Power_Manager
JOY-IT DEBO FAN 303010 - Developer boards - fan, 30 x 30 x 10 mm
13.46 EUR
This 30 x 30 mm fan with Dupont socket connection can be used for single board computers such as the Raspberry Pi.Technical data
- Connection: 10 cm cable with 2x1 Dupont socket connection
- Voltage: 5 V
- Current: 7 mA
- Revolutions: 7,516 RPM
- Dimensions (LxWxH): 30 x 30 x 10 mm
JOY-IT DEBO JT ESP32 - Development boards - ESP32 Wi-Fi and Bluetooth module
17.5 EUR
In addition to Wi-Fi, the NodeMCU ESP32 also features a Bluetooth interface. The integrated CP2102 allows you to easily program the board via micro-USB.Specifications
- Processor: Tensilica LX6 dual-core
- Clock speed: 240 MHz
- SRAM: 512 kB
- Memory: 4 MB
- Wireless standard: 802.11 b/g/n
- Frequency: 2.4 GHz
- Bluetooth: Classic / LE
- Data interfaces: UART / I2C / SPI / DAC / ADC
- Operating voltage: 3.3 V (can be operated via 5-V micro-USB)
- Operating temperature: -40 to 125°C
- Dimensions: 48 x 26 x 11.5 mm
JOY-IT DEBO MOUNT-SET 2 - Developer boards - Breadboard toolkit incl. power module
31.97 EUR
Breadboard toolkit incl. power module - perfect basis for your electronics projectsThe breadboard toolkit is the ideal solution for beginners and professionals to carry out test setups and electronic experiments with microcontrollers such as Arduino, Raspberry Pi, BBC micro:bit and many more.
This comprehensive set offers everything you need for a successful start in electronics - safely assembled and efficiently operated.
Features at a glance
• Flexible breadboard - With 830 pins, 200 of which are specifically for the power supply, the breadboard offers enough space for your circuits
• Adjustable power module - Supplies your circuits with 3.3 V and 5 V, individually adjustable for each side. In addition, 3.3 V, 5 V and ground are available on separate pins
• High current output - Maximum output power of 700 mA for reliable operation
• Versatile power supply - Can be connected via micro USB, standard USB or DC-IN. The USB ports can also be used to draw power when using DC-IN
• Practical mounting bracket - With various holes to securely attach microcontrollers. Mounting screws are already included in the set
• Complete accessories - Various jumper cables (including adapter for configuration as ''male'') and a high-quality mounting plate round off the set
Simple operation
The power module is simply plugged onto the breadboard and supplies it reliably with power. A switch allows you to conveniently choose between USB and DC-IN power sources, ensuring maximum flexibility.
Scope of delivery
• robust carrying case
• breadboard with 830 pins
• adjustable power module
• jumper cable
• mounting plate
• mounting screws
JOY-IT DEBO USB-PD 4 - Developer boards - USB-PD trigger module, solder pads
16.14 EUR
With this small module, you can trigger USB PowerDelivery protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module as well as via the trigger input. The currently selected voltage can be read from the color of the RGB LED integrated on the module. The module is flexible to use and easy to integrate due to its interfaces and design.Specifications
• Output voltage: 5 ... 20 V
• supply voltage: up to 20 V / 100 W
• output current: max. 5 A
• output power: max. 100 W
• input interface: solder pads
• output interface: solder pads
Note
Power supply not included
JOY-IT DEBO USB-PD 3 - Developer boards - USB-PD trigger module, USB-C to solder pads
21.53 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details
• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: solder pads (for USB-A or screw terminal)
• dimensions (LxWxH): 31.5 x 15 x 14 mm
Note
• USB-C power supply not included in delivery
JOY-IT DEBO RELAY2 5V - Developer boards - Relay module, 5 V, SRD-05VDC-SL-C
14.6 EUR
Product description: 5V relay module (COM-RM01)The COM-RM01 5V relay module is a reliable and powerful solution for switching high loads in various applications. It is ideal for industrial control, home automation and DIY projects. With a switching capacity of up to 6 A at 230 V AC or 30 V DC, it can be used for a wide range of applications. With additional cooling, it can even switch 10 A. Thanks to its compact design and simple control via 5 V logic signals, the relay can be easily integrated into existing systems.
Technical data
- Model: COM-RM01
- Function: Relay for switching higher voltages with 5V logic control
- Operating voltage: 5 V DC
- Control connections: VCC, GND, signal
- Load connections: COM, NO, NC
- Maximum load: 6 A / 230 V AC, 6 A / 30 V DC
- Maximum load with cooling: 10 A / 230 V AC, 10 A / 30 V DC
- Dimensions: 27 x 45 x 19 mm
The COM-RM01 is a compact and reliable solution for a wide range of switching applications - ideal for home automation, industrial control systems and DIY projects.
JOY-IT DEBO JT ESP8266 - Developer boards - NodeMCU ESP8266 Wi-Fi module
20.08 EUR
This Wi-Fi module, which is based on the ESP8266, is compatible with every open source platform, such as Raspberry, Arduino, Banana Pi and CubieBoard, and is equipped with a range of useful functions.Specifications
- Processor: Tensilica LX106
- Clock speed: 80 - 160 MHz
- Internal memory: 64 KB
- Data memory: 96 KB
- Wireless standard: 802.11 b/g/n
- Frequency: 2.4 GHz
- Data interfaces: UART/I2C/PWM/GPIO
- Operating voltage: 3.0 - 3.6 V (can be operated via 5-V microUSB)
- Working current: 80 mA
- Operating temperature: -40 to 125°C
- Dimensions: 49,3 x 26,3 x 13 mm
MICROCHIP AT25256B-SSHL - EEPROM, serial, 256Kb (32kx8), SPI, 1.8 - 5.5 V, SO-8
11.19 EUR
256 Kb SPI Serial EEPROMDescription:
The Microchip AT25256B is a 256 Kb Serial EEPROM utilizing the industry standard Serial Peripheral Interface (SPI) compatible serial bus. The device is organized as one block of 32768 x 8-bit and is optimized for use in consumer electronics, industrial, medical, and automotive applications where reliable and dependable nonvolatile memory storage is essential. Software write protection allows the user to protect ¼, ½, or the entire memory array. A hardware write protect pin is also provided, which additionally protects against inadvertent writes to the status register. The EEPROM is available in a variety of space-saving packaging options.
Features:
Density : 256 Kbit
Op. Volt Range (V) : 1.8 to 5.5
Max. Clock Freq.: 20 MHz
Page Size (bytes): 64
Write Protect: Quarter, Half, Whole Array
Temp Range (°C): -40°C to +85°C
Endurance: 1,000,000
Bus Modes: SPI
• Serial Peripheral Interface (SPI) Compatible
- Supports SPI modes 0 and 3
- Up to 20 MHz clock frequency
• Self-Timed Erase and Write Cycles (5 ms max.)
• Low Power Consumption
- Read current: 7mA (Max) at 5 MHz
- Write current: 7 mA (Max) at 5 MHz
- Standby current: 3 µA (Max) at 1.8V, 5 µA (Max) at 5 V
• Block Write Protection: Protect 1/4, 1/2 or Entire Array
• More than 1 million erase/write cycles
• Data retention 100 years
MICROCHIP AT25320B-SSHL - EEPROM, serial, 32Kb (4kx8), SPI, 1.8 - 5.5 V, SO-8
10.57 EUR
32 Kb SPI Serial EEPROMDescription:
The Microchip AT25320B is a 32 Kb Serial EEPROM utilizing the industry standard Serial Peripheral Interface (SPI) compatible serial bus. The device is organized as one block of 4096 x 8-bit and is optimized for use in consumer electronics, industrial, medical, and automotive applications where reliable and dependable nonvolatile memory storage is essential. Software write protection allows the user to protect ¼, ½, or the entire memory array. A hardware write protect pin is also provided, which additionally protects against inadvertent writes to the status register. The EEPROM is available in a variety of space-saving packaging options.
Features:
Density : 32 Kbit
Op. Volt Range (V) : 1.8 to 5.5
Max. Clock Freq.: 20 MHz
Page Size (bytes): 32
Write Protect: Quarter, Half, Whole Array
Temp Range (°C): -40°C to +85°C
Endurance: 1,000,000
Bus Modes: SPI
• Serial Peripheral Interface (SPI) Compatible
- Supports SPI modes 0 and 3
- Up to 20 MHz clock frequency
• Self-Timed Erase and Write Cycles (5 ms max.)
• Low Power Consumption
- Read current: 6mA (Max) at 5 MHz
- Write current: 6 mA (Max) at 5 MHz
- Standby current: 6 µA (Max) at 1.8V, 10 µA (Max) at 5 V
• Block Write Protection: Protect 1/4, 1/2 or Entire Array
• More than 1 million erase/write cycles
• Data retention 100 years
• Automotive AECQ-100 Qualified1
WAVESHARE DEBO FPR CAP - Developer boards - capacitive fingerprint reader, STM32F205
64.42 EUR
Designed for secondary development, high-speed identification and high stability, this fingerprint module is an intelligent module that provides features such as fingerprint recording, image processing, feature extraction, template generation, template storage, fingerprint matching and search, and more.- integrated high-speed processor STM32F205
- commercial fingerprint algorithm, faster identification
- high-precision optical sensor, standard 16-pin interface
- split structure: fingerprint sensor + processing circuit + algorithm platform
- easy to develop, controlled via UART
- open protocol, it is available to freely input and output fingerprint images, fingerprint feature files and other fingerprint actions.
uses
- fingerprint lock
- Fingerprint proof locker
- access control system
- personal identification
- authorization management
Technical data
- Processor (CPU): STM32F205
- Sensor: HD optical
- integrated memory (expandable)
- Wear protection: 1 million times
- Antistatic: 150 KV
- Fingerprint capacity: 1000
- Current: < 50 mA
- Input time: < 0.5 s
- Adjustment time: < 0.5 s
- Voltage level: 3.3 ... 7,5V
- Operating temperature -20 ... +60°C
- Relative humidity 40 to 85 % RH
Documentation and downloads can be found here:
https://www.waveshare.com/wiki/Capacitive_Fingerprint_Reader
WAVESHARE DEBO BARC SCAN - Developer boards - barcode scanner module for 1D/2D codes
53.88 EUR
This is a small 1D / 2D code reader that uses an intelligent image recognition algorithm to quickly and accurately decode the barcode or 2D code on paper or screen. It can be connected directly to a computer via the integrated USB and UART interface or easily integrated into various devices due to its small form factor.• easy to use, requires no knowledge of image recognition
• decodes various common 1D/2D codes like barcode, QR code etc
• integrated micro USB and UART serial port, allows connection to computers or embedded devices
• configurable by scanning the ''configuration code
• onBoard light source, works in the dark
Technical data
• Operating voltage: 5 V
• Operating current: 13 5mA (scan), 58 mA (standby), 2 mA (sleep)
• Operating temperature: 0 ... 60°C
• Operating humidity: 5% ~ 95% (non-condensing)
• Communication interface: UART, USB
• decodes 1D codes: Codebar, Code 11, Code 39/Code 93, UPC/EAN, Code 128/EAN128, Interleaved 2 of 5, Matrix 2 of 5, MSI Code, Industrial 2 of 5, GS1 Databar(RSS)
• decodes 2D codes: QR Code, Datamatrix, PDF417
• Light source: white
• Scan angle: 360° rotation, ±65° tilt, ±60° tilt.
• Field of view: 28° (horizontal), 21.5° (vertical)
• Dimensions: 53.3 x 21.4 mm
Scope of delivery:
1x Barcode Scanner Module
1x cable USB-A plug to microUSB plug
1x PH2.0, 4-pin
Documentation and downloads can be found here:
www.waveshare.com/wiki/Barcode_Scanner_Module
MICROCHIP 24LC256-I/P - EEPROM, 256 Kb (32 K x 8), I²C , 400 KHz, 2.5 ... 5.5 V, DIP-8
11.09 EUR
256Kb I2C compatible 2-wire Serial EEPROMDescription:
The Microchip Technology Inc. 24XX256(1) is a 32K x 8 (256 Kbit) Serial Electrically Erasable PROM (EEPROM), capable of operation across a broad voltage range (1.7V to 5.5V). It has been developed for advanced, low-power applications such as personal communications or data acquisition. This device also has a page write capability of up to 64 bytes of data. This device is capable of both random and sequential reads up to the 256K boundary. Functional address lines allow up to eight devices on the same bus, for up to 1 Mbit address space.
Features:
• Single Supply with Operation down to 2.5V for 24LC256 Devices
• Low-Power CMOS Technology:
- Write current 3 mA, maximum
- Standby current 1 µA, maximum (I-temp.)
• Two-Wire Serial Interface, I2C Compatible
• Cascadable up to Eight Devices
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz, 400 kHz and 1 MHz Compatibility
• Page Write Time: 5 ms, Maximum
• Self-Timed Erase/Write Cycle
• 64-Byte Page Write Buffer
• Hardware Write-Protect
• ESD Protection > 4,000V
• More than 1 Million Erase/Write Cycles
• Data Retention > 200 years
• Factory Programming Available
• RoHS Compliant
• Temperature Ranges: - Industrial (I): -40°C to +85°C
MICROCHIP 24LC256-I/SN - EEPROM, 256 Kb (32 K x 8), I²C , 400 KHz, 2.5 ... 5.5 V, SO-8
10.67 EUR
256Kb I2C compatible 2-wire Serial EEPROMDescription:
The Microchip Technology Inc. 24XX256(1) is a 32K x 8 (256 Kbit) Serial Electrically Erasable PROM (EEPROM), capable of operation across a broad voltage range (1.7V to 5.5V). It has been developed for advanced, low-power applications such as personal communications or data acquisition. This device also has a page write capability of up to 64 bytes of data. This device is capable of both random and sequential reads up to the 256K boundary. Functional address lines allow up to eight devices on the same bus, for up to 1 Mbit address space.
Features:
• Single Supply with Operation down to 2.5V for 24LC256 Devices
• Low-Power CMOS Technology:
- Write current 3 mA, maximum
- Standby current 1 µA, maximum (I-temp.)
• Two-Wire Serial Interface, I2C Compatible
• Cascadable up to Eight Devices
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz, 400 kHz and 1 MHz Compatibility
• Page Write Time: 5 ms, Maximum
• Self-Timed Erase/Write Cycle
• 64-Byte Page Write Buffer
• Hardware Write-Protect
• ESD Protection > 4,000V
• More than 1 Million Erase/Write Cycles
• Data Retention > 200 years
• Factory Programming Available
• RoHS Compliant
• Temperature Ranges: - Industrial (I): -40°C to +85°C
MICROCHIP 25LC256-I/P - EEPROM, 256 Kb (32 K x 8), SPI, 10 MHz, 2.5 ... 5.5 V, DIP-8
11.09 EUR
256Kb 2.5V SPI Serial EEPROMDescription:
The Microchip 25LC256 is a 256 Kb Serial EEPROM utilizing the industry standard Serial Peripheral Interface (SPI) compatible serial bus. The device is organized as one block of 32,768 x 8-bit and is optimized for use in consumer electronics, industrial, medical, and automotive applications where reliable and dependable nonvolatile memory storage is essential. Software write protection allows the user to protect ¼, ½, or the entire memory array. A hardware write protect pin is also provided, which additionally protects against inadvertent writes to the status register. The EEPROM is available in a variety of space-saving packaging options
Features:
• Serial Peripheral Interface (SPI) Compatible
- Supports SPI modes 0 and 3
- Up to 10 MHz clock frequency
• Self-Timed Erase and Write Cycles (5 ms max.)
• Low Power Consumption
- Read current: 6 mA (Max) at 10 MHz
- Write current: 5 mA (Max) at 5.5 V
- Standby current: 5 µA (Max) at 5.5 V
• Block Write Protection: Protect 1/4, 1/2 or Entire Array
• More than 1 million erase/write cycles
• Data retention > 200 years
• Automotive AECQ-100 Qualified1
• Available in standard packages including 8-lead PDIP, SOIC, SOIJ, and TSSOP, as well as 5x6mm DFN
Parametrics:
• Density: 256 Kbit
• Op. Volt Range (V): 2.5 to 5.5
• Max. Clock Freq.: 10 MHz
• Page Size (bytes): 64
• Write Protect: Quarter, Half, Whole Array
• Temp Range (°C): -40°C to +85°C
• Bus Modes: SPI
MICROCHIP 25LC320A-I/SN - EEPROM, 32 Kb (4 K x 8), SPI, 10 MHz, 2.5 ... 5.5 V, SO-8
10.88 EUR
32Kb 2.5V SPI Serial EEPROMDESCRIPTION
The Microchip Technology Inc. 25AA320A/25LC320A (25XX320A*) are 32 kbit Serial Electrically Erasable PROMs. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input. Communication to the device can be paused via the hold pin (HOLD). While the device is paused, transitions on its inputs will be ignored, with the exception of Chip Select, allowing the host to service higher priority interrupts. The 25XX320A is available in standard packages including 8-lead PDIP and SOIC, and advanced packaging including 8-lead MSOP, TSSOP and 2x3 TDFN.
Features:
• Max. Clock 10 MHz
• Low-Power CMOS Technology:
- Max. Write Current: 5 mA at 5.5V, 10 MHz
- Read Current: 5 mA at 5.5V, 10 MHz
- Standby Current: 5 µA at 5.5V
• 4096 x 8-bit Organization
• 32-Byte Page
• Self-Timed Erase and Write Cycles (5 ms max.)
• Block Write Protection : - Protect none, 1/4, 1/2 or all of array
• Built-in Write Protection:
- Power-on/off data protection circuitry
- Write enable latch
- Write-protect pin
• High Reliability:
- Endurance: 1,000,000 Erase/Write cycles
- Data retention: >200 years
- ESD protection: >4000V
• Temperature Ranges Supported:
- Industrial (I): -40°C to +85°C
- Automotive (E): -40°C to +125°C
• Pb-Free and RoHS Compliant
• Automotive AECQ-100 Qualified
MICROCHIP 25LC320A-I/P - EEPROM, 32 Kb (4 K x 8), SPI, 10 MHz, 2.5 ... 5.5 V, DIP-8
11.19 EUR
32Kb 2.5V SPI Serial EEPROMDESCRIPTION
The Microchip Technology Inc. 25AA320A/25LC320A (25XX320A*) are 32 kbit Serial Electrically Erasable PROMs. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input. Communication to the device can be paused via the hold pin (HOLD). While the device is paused, transitions on its inputs will be ignored, with the exception of Chip Select, allowing the host to service higher priority interrupts. The 25XX320A is available in standard packages including 8-lead PDIP and SOIC, and advanced packaging including 8-lead MSOP, TSSOP and 2x3 TDFN.
Features:
• Max. Clock 10 MHz
• Low-Power CMOS Technology:
- Max. Write Current: 5 mA at 5.5V, 10 MHz
- Read Current: 5 mA at 5.5V, 10 MHz
- Standby Current: 5 µA at 5.5V
• 4096 x 8-bit Organization
• 32-Byte Page
• Self-Timed Erase and Write Cycles (5 ms max.)
• Block Write Protection : - Protect none, 1/4, 1/2 or all of array
• Built-in Write Protection:
- Power-on/off data protection circuitry
- Write enable latch
- Write-protect pin
• High Reliability:
- Endurance: 1,000,000 Erase/Write cycles
- Data retention: >200 years
- ESD protection: >4000V
• Temperature Ranges Supported:
- Industrial (I): -40°C to +85°C
- Automotive (E): -40°C to +125°C
• Pb-Free and RoHS Compliant
• Automotive AECQ-100 Qualified
MICROCHIP 25LC256-I/SN - EEPROM, 256 Kb (32 K x 8), SPI, 10 MHz, 2.5 ... 5.5 V, SO-8
11.86 EUR
256Kb 2.5V SPI Serial EEPROMDescription:
The Microchip 25LC256 is a 256 Kb Serial EEPROM utilizing the industry standard Serial Peripheral Interface (SPI) compatible serial bus. The device is organized as one block of 32,768 x 8-bit and is optimized for use in consumer electronics, industrial, medical, and automotive applications where reliable and dependable nonvolatile memory storage is essential. Software write protection allows the user to protect ¼, ½, or the entire memory array. A hardware write protect pin is also provided, which additionally protects against inadvertent writes to the status register. The EEPROM is available in a variety of space-saving packaging options
Features:
• Serial Peripheral Interface (SPI) Compatible
- Supports SPI modes 0 and 3
- Up to 10 MHz clock frequency
• Self-Timed Erase and Write Cycles (5 ms max.)
• Low Power Consumption
- Read current: 6 mA (Max) at 10 MHz
- Write current: 5 mA (Max) at 5.5 V
- Standby current: 5 µA (Max) at 5.5 V
• Block Write Protection: Protect 1/4, 1/2 or Entire Array
• More than 1 million erase/write cycles
• Data retention > 200 years
• Automotive AECQ-100 Qualified1
• Available in standard packages including 8-lead PDIP, SOIC, SOIJ, and TSSOP, as well as 5x6mm DFN
Parametrics:
• Density: 256 Kbit
• Op. Volt Range (V): 2.5 to 5.5
• Max. Clock Freq.: 10 MHz
• Page Size (bytes): 64
• Write Protect: Quarter, Half, Whole Array
• Temp Range (°C): -40°C to +85°C
• Bus Modes: SPI
MICROCHIP 24LC32A-I/SN - EEPROM, 32 Kb (4 K x 8), 2.5 ... 5.5 V, SO-8
10.35 EUR
EEPROM, serial, 32kb, SO-8
JOY-IT DEBO RB-BB 3B - Developer boards - Laboratory card, 84 x 54 mm, black
12.48 EUR
Lab card from Joy-it for the developer board areaWelcome to the world of electronic prototypes, where innovation and reliability meet! Our high-quality breadboard is the ideal tool for all your electronics projects.
Whether you are an experienced electronics expert or a beginner, our breadboard is designed to optimize your prototyping experience.
With precise plug-in holes and universal compatibility, it allows you to connect electronic components securely and effortlessly. This allows you to implement your ideas quickly and reliably.
Specifications
• 1 contact terminal with 300 contacts
• 2 distribution terminals with 100 contacts
• Material: plastic
• Color: black
• Adhesive surface on the underside
• Dimensions (LxWxH): 84 x 54 x10 mm
JOY-IT DEBO TFT 1.8 TD - Developer boards - Display, 1.8'', Touch, ST7735R
19.2 EUR
This mini LCD touch display is perfect for your Raspberry/Arduino project. The 1.8'' TFT display with SPI interface is universally applicable for your projects. It can display 262,000 colors and offers a maximum resolution of 128x160 pixels.
Specifications
• Display 4,57 cm (1,8'')
• resolution: 128 x 160 pixels
• contrast: 1:400
• 262,000 colors
• touch function
• LED backlight
• dimensions (WxHxD): 57 x 35 x 5 mm
• Panel: JD-T18003-T01
• IC driver: ST7735R
• SPI interface
• compatible with Raspberry Pi and Arduino
Note: Please note that programming knowledge is required to use this item.
Delivery without Raspberry Pi
JOY-IT DEBO RB-BB 2B - Developer boards - Laboratory card, 165 x 54 mm, black
12.64 EUR
Lab card from Joy-it for the developer board areaWelcome to the world of electronic prototypes, where innovation and reliability meet! Our high-quality breadboard is the ideal tool for all your electronics projects.
Whether you are an experienced electronics expert or a beginner, our breadboard is designed to optimize your prototyping experience.
With precise plug-in holes and universal compatibility, it allows you to connect electronic components securely and effortlessly. This allows you to implement your ideas quickly and reliably.
Specifications
• 1 contact terminal with 630 contacts
• 2 distribution terminals with 200 contacts
• Material: plastic
• Color: black
• Adhesive surface on the underside
• Dimensions (LxWxH): 165 x 54 x10 mm
MICROCHIP 24LC32A-I/P - EEPROM, 32 Kb (4 K x 8), 2.5 ... 5.5 V, DIP-8
10.57 EUR
Microchip EEPROM, serial, 2.5 VI²C-Bus
Housing: DIP-8
32K
FREI DEBO KABELSET23 - Developer boards - jumper cable, 40cm, 3x 40 cables
17.34 EUR
With this jumper cable set a Raspberry Pi, Arduino or other developer boards can be quickly and easily connected to a breadboard or to modules/sensors. The set contains 3 different cables (Female-Female, Male-Male, Female-Male). Each cable consists of 40 single wires, which can also be separated.Details
• each cable consists of 40 cores
• cores can also be separated
• 2,54mm pin spacing (pitch)
• inner conductor: AWG 28 copper
• length: 40cm
Scope of delivery
• 3x jumper cable á 40 wires (1x Female - Female (female - female) / 1x Male - Male (male - male) / 1x Female - Male (female - male))
MICROCHIP 28C64-150 PLCC - EEPROM, 64 Kb (8 K x 8), 5 V, 150 ns, PLCC-32
17.29 EUR
5V 64Kbit (8Kbit x 8) Parallel EEPROM with Software Data ProtectionDescription:
The AT28C64B is a high-performance electrically-erasable and programmable readonly memory (EEPROM). Its 64K of memory is organized as 8,192 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 150 ns with power dissipation of just 220 mW. When the device is deselected, the CMOS standby current is less than 100 µA. The AT28C64B is accessed like a Static RAM for the read or write cycle without the need for external components. The device contains a 64-byte page register to allow writing of up to 64 bytes simultaneously. During a write cycle, the addresses and 1 to 64 bytes of data are internally latched, freeing the address and data bus for other operations. Following the initiation of a write cycle, the device will automatically write the latched data using an internal control timer. The end of a write cycle can be detected by DATA POLLING of I/O7. Once the end of a write cycle has been detected, a new access for a read or write can begin. Atmel’s AT28C64B has additional features to ensure high quality and manufacturability. The device utilizes internal error correction for extended endurance and improved data retention characteristics. An optional software data protection mechanism is available to guard against inadvertent writes. The device also includes an extra 64 bytes of EEPROM for device identification or tracking.
Features
• Fast Read Access Time – 150 ns
• Automatic Page Write Operation – Internal Address and Data Latches for 64 Bytes
• Fast Write Cycle Times
– Page Write Cycle Time: 10 ms Maximum (Standard)
– 1 to 64-byte Page Write Operation
• Low Power Dissipation
– 40 mA Active Current
– 100 µA CMOS Standby Current
• Hardware and Software Data Protection
• DATA Polling and Toggle Bit for End of Write Detection
• High Reliability CMOS Technology
– Endurance: 100,000 Cycles
– Data Retention: 10 Years
• Single 5V ±10% Supply
• CMOS and TTL Compatible Inputs and Outputs
• JEDEC Approved Byte-wide Pinout
• Industrial Temperature Ranges
• Green (Pb/Halide-free) Packaging Option Only
JOY-IT DEBO USB-PD 1 - Developer Boards - USB-PD Trigger Module, USB-C to Terminal Bloc
20.8 EUR
With this small module you can trigger USB-PD protocols and thus charge your laptop via a PD-capable USB-C power supply, for example. The output voltage is adjustable in 5 steps (5 V, 9 V, 12 V, 15 V and 20 V) via the button integrated on the module. The currently selected voltage can be read from the color of the RGB LED integrated on the module (red = 5 V / yellow = 9 V / green = 12 V / light blue = 15 V / dark blue = 20 V / purple = highest possible voltage). Due to its output interfaces, the module can be used flexibly and is easy to integrate.Technical details
• input voltage up to 20 V / 100 W (via a PD-capable USB-C power supply unit)
• input interface: USB-C
• Output voltage: 5/9/12/15/20 V (adjustable via knob)
• Output current: max. 5 A
• output power: max. 100 W
• Output interface: screw terminal block
• dimensions (LxWxH): 31.5 x 15 x 14 mm
Note
• USB-C power supply not included in delivery
MICROCHIP 24AA32A-I/SN - EEPROM, 32 Kb (4 K x 8), 1.7 ... 5.5 V, SO-8
10.35 EUR
EEPROM serial 32kb SO-8
JOY-IT DEBO LCD1.44 IPS - Developer Boards - Display LCD,1.44'',IPS
20.28 EUR
DescriptionThis compact IPS TFT display is controlled via SPI and is well suited for use as an output device on microcontrollers (e.g. NodeMCU) and single board computers (e.g. Raspberry Pi).
By using a high resolution IPS panel with a high pixel density of 125 dpi, content can be displayed in high resolution on the compact display.
Specifications
• Display: TFT (IPS) LCD
• 262,144 colours
• Resolution: 128 x 128 Pixel / 125 dpi
• Chip: ILI9163
• Interface: SPI
• Supply voltage: 3.3 V
• Power consumption: 8 - 10 mA
• LL voltage: 3.3 V
• Response time: 25 ms
• Brightness: 178 cd/m²
• Viewing Angle: 180
• Temperature range: -40 °C ... +85°C
• Dimensions (LxWxH): 30 x 43 x 10 mm
JOY-IT DEBO MOTODRIVER2 - Developer boards - MotoDriver2, L298N
17.18 EUR
The MotoDriver2 is an extension board which can be easily and quickly connected to your Arduino and allows you to control and to supply up to two DC-motors. Additional power supplys for your motors, or large amounts of cables, are no longer needed. The board allows to control with a constant voltage between 5V and 35V.Specifications
• Driver: L298N
• Logical voltage: 5V
• Drive Voltage: 5V— 35V
• Drive Current: 2A
• Power: Max. 25W
Dimensions (L x B x H): 43 x 43 x 27 mm
JOY-IT DEBO SENS BME680 - Developer boards - Sensor Bosch BME680
28.35 EUR
The BME680 from Bosch Sensortec is the new, compact ambient sensor with integrated sensors for humidity, pressure, temperature and air quality. The I2C and SPI digital interfaces also enable simple and fast readout of theMeasured values.
Technical data
- digital interfaces: I2C, SPI
- Operating voltage: 3 ... 5 V
- compatible with Arduino, Raspberry Pi, etc.
- Dimensions: 30 x 14 x 10 mm
humidity sensor
- Reaction time: 8 s
- Tolerance: ± 3%.
- Hysteresis: 1.5%.
pressure sensor
- Pressure range: 300 ... 1100 hPa
- relative accuracy: ± 0.12 hPa
- absolute accuracy: ± 1 hPa
temperature sensor
- Working range: -40 ... +85 °C
- complete accuracy: 0 ... 65 °C
air quality sensor
- Reaction speed: 1 s
JOY-IT DEBO LEV SHIFTER - Developer Boards - Voltage Converter / Level Shifter, TXB0104
13.88 EUR
Voltage translator/level shifter for various developer boardsThis board converts digital signals up or down from one voltage to another.
The module can be firmly soldered or used on a breadboard.
- Available channels: 4
- Voltage range (VCCa): 1.2 to 3.6 V
- Voltage range (VCCb): 1.7 to 5.5 V
- Dimensions: 27 x 17 x 11 mm
FREI DEBO 2WD SPEED - Developer Boards - Speed/Distance Measurement Module
12.43 EUR
Geschwindigkeitsmessung für Zweirradantriebe aus einem Modul mit zwei Gabellichtschranken.Unterbrechungen zum Beispiel durch Spalte in den Felgen können als Unterbrechnung des Signals erkannt und ausgewertet werden. Integrierte Schmitt-Trigger sorgen für ein stabiles Signal!
Technische Daten
- Versorgung über 5 V DC
- Ausgang 5 V TTL
- Schmitt-Trigger
Anschlussbelegung
- 1 - Spannungsversorgung
- 2 - Masse
- 3 - Ausgang 1
- 4 - Ausgang 2
IDUINO DEBO MOS MODULE - Developer boards - MOS driver module, 3.3 / 5 V, 0...24 V, IRF52
11.86 EUR
Steuern Sie größere Lasten wie Lampen, Pumpen oder andere Gleichstromgeräte mit diesem Modul. Im Gegensatz zur Steuerung mit Relais ist diese Variante dank Halbleitertechnik verschleißfreier. Sie können Geräte mit bis zu 24 V bei 5 A steuern.Außerdem ist das Dimmen von Lampen oder die Geschwindigkeitssteuerung der Motoren durch Pulsweitenmodulation (PWM) in der Ansteuerung möglich. Ein Codebeispiel finden Sie im hinterlegten Datenblatt.
Verwendung
Sie schließen die Stromversorgung des Geräts, das Sie steuern wollen, an Vin und GND an. Sie schließen Ihr Gerät an die Schraubklemmen V+ und V- an. Wenn die SIG-Leitung HIGH ist, leuchtet eine kleine LED auf, und GND ist mit V- ''verbunden''. Wenn die SIG-Leitung LOW ist, erlischt die LED, und der GND wird von V- ''getrennt''. V+ und Vin sind ständig miteinander verbunden.
Merkmale
• MOSFET: IRF520
• Betriebsspannung: 3,3 / 5 V
• Ausgangsspannung: 0 - 24 V
• Ausgangsstrom: 1 A ( bis zu 5 A mit Kühlkörper)
• kompatibel zu Arduino, Raspberry Pi, ARM, etc
Hinweis
Für Ströme größer als 1 A muss der MOSFET mit einem Kühlkörper ausgestattet werden
IDUINO DEBO BALL SWITCH - Developer boards - Ball switch sensor module
11.81 EUR
When this ball switch module is flipped, it will output a high or low signal to your controller. This module has an indicator light that lights up when the voltage signal of this module is changed. It also has an integrated 3-pin terminal that can easily be used to connect an Arduino sensor expansion board, for example.
Specifications
• operating voltage: 5 V
• 3-pin jumper
• dimensions (L x W): 25 x 15 mm
JOY-IT DEBO RELAY 4WAY - Developer boards - 4-way solid state relay, 5V, 240V/2A
20.18 EUR
This 4-channel solid state relay is suitable for switching AC voltage. It has a galvanic separation by integrated optocouplers and the switching of the load is done with transistors, which is why it has a much higher life span than mechanical relays.- Relay type Omron SSR
- compatible with Raspberry Pi, Arduino, etc.
- galvanic isolation, transistor switched, with fuse resistor (240 V, 2A)
- 5 V DC Supply voltage
- 240 V AC maximum load voltage
- 2 A maximum load current
- 0 - 2.5 V: relay off
- 3.3 - 5 V: Relay On
- 0 mA Quiescent current
- 12,5 mA Operating current
- 2 mA Tripping current
- Dimensions (LxVxH): 57 x 55 x 23 mm