HIRSCHMANN TEST & MEASUREMENT SS 260 - Tip protector
10.25 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Transparent tip protection and IC caliper. By clipping it onto test probes PRUEF 2, PRUEF 2S and PRUEF 2600 the needle-like tip is covered, providing protection against injury. ICs can be contacted without the risk of short circuit and slipping is prevented.
EAN: 4250260215317
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Transparent tip protection and IC caliper. By clipping it onto test probes PRUEF 2, PRUEF 2S and PRUEF 2600 the needle-like tip is covered, providing protection against injury. ICs can be contacted without the risk of short circuit and slipping is prevented.
EAN: 4250260215317
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
HIRSCHMANN TEST & MEASUREMENT KLEPS FP2B GG - Mini clip probe tip QFPIC-Clip yellow-green
52.02 EUR
Allows the contacting of QFPICs from 0.5 to 0.8 mm lead pitch. Supplied in pairs (yellow/green). The slim housing profile facilitates measurement on QFPICs with many clips side-by-side. Pluggable with MKL and MAL measuring leads• Clamping range: 0.5 - 0.8 mm
• Connection type: non-suspended pin
• Rated voltage: 60 V DC
• Colour: yellow/green
HIRSCHMANN TEST & MEASUREMENT KLEPS 2700 SW - Safety clip probe tip 4.0 mm, up to 1.5 mm
20.8 EUR
Safety clip probe tip with split test terminal. The suspended stainless steel tip can contact insulated lines from 0.25 mm² to 1.5 mm² (3.5 mm diameter) without stripping.• Clamping width: 1.5 mm
• Connection type: 4 mm socket
• Rated voltage: 1000 V AC/DC
• Rated current: 10 A
• Resistance: 100 mOhm
• Measurement category: CAT III (IEC 61010)
• Colour: black
HIRSCHMANN TEST & MEASUREMENT KLEPS 2900 RT - Safety clip probe tip 4.0 mm, hooks up to 5.5 mm
18.48 EUR
Safety clip probe tip with rigid hook for secure clamping of eyelets, pins, wires and plates. Pluggable with safety measuring leads.• Clamping width: 5.5 mm
• Connection type: 4 mm socket
• Rated voltage: 1000 V AC/DC
• Rated current: 20 A
• Resistance: 50 mOhm
• Measurement category: CAT III (IEC 61010)
• Colour: red
HIRSCHMANN TEST & MEASUREMENT KLEPS 250 SW - 4 mm clip probe tip, safe from being touched, black
20.49 EUR
Contact-protected clip probe tip with rotating gripping pliers and flexible shaft. Pins and wires can be connected up to max. diameter of 4 mm. Pluggable with sliding sleeve measuring leads• Clamping width: 4 mm
• Connection type: 4 mm socket
• Rated voltage: 300 V AC/DC
• Resistance: 100 mOhm
• Colour: black
HIRSCHMANN TEST & MEASUREMENT KLEPS 250 RT - 4 mm clip probe tip, safe from being touched, red
20.49 EUR
Contact-protected clip probe tip with rotating gripping pliers and flexible shaft. Pins and wires can be connected up to max. diameter of 4 mm. Pluggable with sliding sleeve measuring leads• Clamping width: 4 mm
• Connection type: 4 mm socket
• Rated voltage: 300 V AC/DC
• Resistance: 100 mOhm
• Colour: red
HIRSCHMANN TEST & MEASUREMENT MA 260-SH RT - 4.0 mm crocodile clip, shock-protected
12.22 EUR
Shock-protected miniature alligator clip. Clamping range up to 6 mm bolt diameter. The flat part of the clamping jaws allow a contact-safe clamping of thin wires. • Clamping width: 6 mm
• Connection type: 4 mm socket
• Rated voltage: 300 V AC.
• Rated current: 15 A
• Resistance: 5 mega-ohms
• Measurement category: CAT II (IEC 61010)
• Colour: red
HIRSCHMANN TEST & MEASUREMENT KLEPS 2BU SW - Clip probe tip, dia. = 2 mm, black
14.6 EUR
Clip probe tip from the Hirschmann miniature laboratory range.
HIRSCHMANN TEST & MEASUREMENT KLEPS 60 SW - 4.0 mm clip probe tip, up to 4 mm, black
17.18 EUR
Clip probe tip with gripping pliers and flexible shaft. Pins and wires can be connected up to max. diameter of 4 mm.• Clamping width: 4 mm
• Connection type: 4 mm socket, screw fixed
• Rated voltage: 60 V DC
• Resistance: 10 mOhm
• Colour: black
HIRSCHMANN TEST & MEASUREMENT KLEPS 2 SW - Clip probe tip, solder connection, contact hooks, black
12.28 EUR
Miniature clip probe tip with solder connection. Gold-plated phosphorus bronze contact hooks for wires up to 2 mm in diameter. When soldering, remove control button, engage after connecting the cable by pushing until the stop.Colour: black
Clamping range: max. diameter 2 mm
Measuring category according to IEC 61010: CAT I
Standard: IEC 61010
Connection type: soldering
Rated voltage: 30 V AC/60 V DC
Rated current: 6 A
Resistance: 15 mOhm
HIRSCHMANN TEST & MEASUREMENT KLEPS 2 RT - Clip probe tip, solder connection, contact hooks, red
12.28 EUR
Miniature clip probe tip with solder connection. Gold-plated phosphorus bronze contact hooks for wires up to 2 mm in diameter. When soldering, remove control button, engage after connecting the cable by pushing until the stop.Colour: red
Clamping range: max. diameter 2 mm
Measuring category according to IEC 61010: CAT I
Standard: IEC 61010
Connection type: soldering
Rated voltage: 30 V AC/60 V DC
Rated current: 6 A
Resistance: 15 mOhm
HIRSCHMANN TEST & MEASUREMENT MA 260-SH SW - 4.0 mm crocodile clip, shock-protected
12.22 EUR
Shock-protected miniature alligator clip. Clamping range up to 6 mm bolt diameter. The flat part of the clamping jaws allow a contact-safe clamping of thin wires. • Clamping width: 6 mm
• Connection type: 4 mm socket
• Rated voltage: 300 V AC.
• Rated current: 15 A
• Resistance: 5 mega-ohms
• Measurement category: CAT II (IEC 61010)
• Colour: black
HIRSCHMANN TEST & MEASUREMENT KLEPS 064 PCH GN - 0.64 mm mini clip probe tip 1.5 green
22.3 EUR
The compact design allows the use of very small components (pins and wires up to a diameter of 1 mm). Pluggable with MKL(m) and MAL(m) measuring leads.• Clamping width: 1.5 mm
• Connection type: non spring-mounted pin, diameter 0.64 mm
• Rated voltage: 60 V DC
• Colour: green
HIRSCHMANN TEST & MEASUREMENT KLEPS 30 SW - Hirschmann clip probe tip, black
15.79 EUR
Hirschmann clip probe tip
HIRSCHMANN TEST & MEASUREMENT KLEPS 2700 RT - Safety clip probe tip 4.0 mm, up to 1.5 mm
20.8 EUR
Safety clip probe tip with split test terminal. The suspended stainless steel tip can contact insulated lines from 0.25 mm² to 1.5 mm² (3.5 mm diameter) without stripping.• Clamping width: 1.5 mm
• Connection type: 4 mm socket
• Rated voltage: 1000 V AC/DC
• Rated current: 10 A
• Resistance: 100 mOhm
• Measurement category: CAT III (IEC 61010)
• Colour: red
HIRSCHMANN TEST & MEASUREMENT KLEPS 2BU RT - Clip probe tip, dia. = 2 mm, red
14.6 EUR
Clip probe tip from the Hirschmann miniature laboratory range.
HIRSCHMANN TEST & MEASUREMENT KLEPS 064 PCH GE - 0.64 mm mini clip probe tip 1.5 yellow
20.8 EUR
The compact design allows the use of very small components (pins and wires up to a diameter of 1 mm). Pluggable with MKL(m) and MAL(m) measuring leads.• Clamping width: 1.5 mm
• Connection type: non spring-mounted pin, diameter 0.64 mm
• Rated voltage: 60 V DC
• Colour: yellow
HIRSCHMANN TEST & MEASUREMENT KLEPS 2800 SW - Safety clip probe tip 4.0 mm, claws up to 10 mm
22.97 EUR
Safety clip probe tip with wide-opening gripping claws for contacting large measurement points and lines with large cross-sections. Pluggable with safety measuring leads.• Clamping width: 10 mm
• Connection type: 4 mm socket
• Rated voltage: 1000 V AC/DC
• Rated current: 20 A
• Resistance: 100 mOhm
• Measurement category: CAT III (IEC 61010)
• Colour: black
HIRSCHMANN TEST & MEASUREMENT KLEPS 30 RT - Hirschmann clip probe tip, red
15.79 EUR
Hirschmann clip probe tip
HIRSCHMANN TEST & MEASUREMENT PRUEF 1 RT - Miniature test probe, tip 1mm
12.53 EUR
Miniature test probe for sampling the smallest measuring points. The stainless steel tip easily pierces layers of insulation and oxide. • Tip diameter: 1 mm
• Connection type: soldered connection up to 0.5 mm²
• Rated voltage: 60 V DC
• Resistance: 50 mOhm
• Colour: red
HIRSCHMANN TEST & MEASUREMENT KLEPS 60 RT - 4.0 mm clip probe tip, up to 4 mm, red
17.18 EUR
Clip probe tip with gripping pliers and flexible shaft. Pins and wires can be connected up to max. diameter of 4 mm.• Clamping width: 4 mm
• Connection type: 4 mm socket, screw fixed
• Rated voltage: 60 V DC
• Resistance: 10 mOhm
• Colour: red
HIRSCHMANN TEST & MEASUREMENT KLEPS 3ST RT - 0.64 mm mini clip probe tip 3.5 red
14.19 EUR
Miniature clip probe tip with rotating gripping pliers. Suitable for very thin wires and closely adjacent contact points. Pluggable with MKL... and MAL...• Clamping width: 3.5 mm
• Connection type: 1x 0.64 mm pin
• Rated voltage: 60 V DC
• Rated current: 2 A
• Resistance: 10 mOhm
• Colour: red
HIRSCHMANN TEST & MEASUREMENT PRUEF 2610-FT SW - 4.0 mm test probe
15.84 EUR
Test probe with elastic, non-slip insulating sleeve and slim, spring-loaded stainless steel tip. Thus constant contact pressure without slipping, even in the smallest measuring points...• tip diameter: 0.75 mm
• connection type: 4 mm socket, spring-loaded
• Rated voltage: 1000 V AC/DC
• contact resistance: 50 mO
• Measurement category: CAT III (IEC 61010)
• color: black
HIRSCHMANN TEST & MEASUREMENT PL 2600 SILS RT - safety silicone test lead, test probe/straight plug, 1m
19.05 EUR
Safety silicone measuring lead with dual function safety test probe. Tip for penetration of insulation and oxide layers and 4 mm diameter pin for insertion into sockets. 4 mm diameter safety connector with straight outlet. Incl. tip protection.type: PL 2600 SIL S red
system: 4 mm safety system
colour: red
cable length: 100 cm
cable material: silicone
conductor size: 1 mm²
measurement cat. acc. IEC 61010: CAT II
rated voltage AC/DC 1000V
rated current: 16 A
HIRSCHMANN TEST & MEASUREMENT PL 2700 S RT - Hirschmann test lead, 4 mm, red, 1 m
19.98 EUR
Touch-proof test lead with test probe, tip for piercing oxide layers. 4 mm diameter safety plug with straight outlet. Highly flexible, double insulated stranded wire with integrated colour indicator to detect damage to the insulation.- Rated voltage: AC/DC 1000V
- Measurement category according to IEC61010: CAT II
- Material Test Probe: Brass, Nickel Plated
- Housing material: PA, PP
- cable length: 100 cm
- Cable cross section: 1 mm²
- Rated current: 16 A
Translated with www.DeepL.com/Translator
HIRSCHMANN TEST & MEASUREMENT PL 2600 SW SW - PL 2600 S test lead
19.98 EUR
Shock-proof test lead with dual-function safety test probe. Tip for piercing insulating and oxide layers and 4-mm diameter pin for insertion into sockets. 4-mm diameter safety plug with straight outlet. Incl. spike protection.• Plug Ø: 4 mm, sprung
• Socket Ø: 4 mm
• Lead: PVC 1.0 m
• Cable cross-section: 1 mm² (259 x 0.07)
• Rated voltage: 1000 V AC/DC
• Current rating: 16 A
• Resistance: 20 mOhm
• Measurement Category: CAT III (IEC 61010)
• Colour: black
HIRSCHMANN TEST & MEASUREMENT KLEPS 064 PCH BL - 0.64 mm mini clip probe tip 1.5 blue
21.01 EUR
The compact design allows the use of very small components (pins and wires up to a diameter of 1 mm). Pluggable with MKL(m) and MAL(m) measuring leads.• Clamping width: 1.5 mm
• Connection type: non spring-mounted pin, diameter 0.64 mm
• Rated voltage: 60 V DC
• Colour: blue
HIRSCHMANN TEST & MEASUREMENT PL 2700 SW SW - Hirschmann test lead, 4 mm, black, 1 m
19.98 EUR
Touch-proof test lead with test probe, tip for piercing oxide layers. 4 mm diameter safety plug with angled outlet. Highly flexible, double insulated stranded wire with integrated colour indicator to detect damage to the insulation.- Rated voltage: AC/DC 1000V
- Measurement category according to IEC61010: CAT II
- Material Test Probe: Brass, Nickel Plated
- Housing material: PA, PP
- cable length: 100 cm
- Cable cross section: 1 mm²
- Rated current: 16 A
HIRSCHMANN TEST & MEASUREMENT PRUEF 1 SW - Miniature test probe, tip 1mm
12.53 EUR
Miniature test probe for sampling the smallest measuring points. The stainless steel tip easily pierces layers of insulation and oxide. • Tip diameter: 1 mm
• Connection type: soldered connection up to 0.5 mm²
• Rated voltage: 60 V DC
• Resistance: 50 mOhm
• Colour: black
HIRSCHMANN TEST & MEASUREMENT PRUEF PL 3 SW - Measuring lead with probe, 1 mm², 1 m, black
21.27 EUR
Test lead with dual-function probe. - Probe tip for piercing layers of insulation/oxide and 4-mm diameter pin for insertion into sockets
- 4-mm diameter plug with cage spring, straight outlet
- Highly flexible, double-insulated stranded cable with integrated colour indicator for detecting damage to the insulation
- Incl. tip protection.
- Colour: black
HIRSCHMANN TEST & MEASUREMENT PL 2700 S SW - Hirschmann test lead, 4 mm, black, 1 m
19.77 EUR
Touch-proof test lead with test probe, tip for piercing oxide layers. 4 mm diameter safety plug with straight outlet. Highly flexible, double insulated stranded wire with integrated colour indicator to detect damage to the insulation.- Rated voltage: AC/DC 1000V
- Measurement category according to IEC61010: CAT II
- Material Test Probe: Brass, Nickel Plated
- Housing material: PA, PP
- cable length: 100 cm
- Cable cross section: 1 mm²
- Rated current: 16 A
HIRSCHMANN TEST & MEASUREMENT KLEPS 064 PCH RT - 0.64 mm mini clip probe tip 1.5 red
22.56 EUR
The compact design allows the use of very small components (pins and wires up to a diameter of 1 mm). Pluggable with MKL(m) and MAL(m) measuring leads.• Clamping width: 1.5 mm
• Connection type: non spring-mounted pin, diameter 0.64 mm
• Rated voltage: 60 V DC
• Colour: red
HIRSCHMANN TEST & MEASUREMENT PRUEF 2-S SW - 4.0 mm safety test probe
12.69 EUR
Contact-protected test probe with elastic, shatter-proof insulating sleeve and slender stainless steel tip for piercing layers of insulation and oxide. Connected via sliding sleeve test leads. • Tip diameter: 2 mm
• Connection type: 4 mm socket, unsprung
• Rated voltage: 600 V AC/DC
• Resistance: 50 mOhm
• Colour: black
HIRSCHMANN TEST & MEASUREMENT PRUEF 2600 C2 SW - Test probe, 4 mm, 1000 V CAT II 1 A, black, secured
13.04 EUR
Test probe with shatter-proof insulating sleeve and slender stainless steel tip. Tip for piercing layers of insulation and oxide. 4mm diameter brass socket connection. Connected via safety test leads. Accessories: tip protector and IC tap SS 260Colour: black
Measuring category according to IEC 61010: CAT II
Standard: IEC 61010
Pin diameter: 2 mm
Contact type: unsprung test probe
Connection type: 4 mm socket (unsprung)
Rated voltage: AC/DC 1000 V
Resistance: 50 mOhm
HIRSCHMANN TEST & MEASUREMENT PL 2600 SILSW RT - safety silicone test lead, test probe/angled plug, 1m
19.24 EUR
Safety silicone test lead with dual function safety test probe. Tip for penetration of insulation and oxide layers and 4 mm diameter pin for insertion into sockets. 4 mm diameter safety connector with right-angled outlet. Incl. tip protection.type: PL 2600 SIL S WS red
system: 4 mm safety system
colour: red
cable length: 100 cm
cable material: silicone
conductor size: 1 mm²
measurement cat. acc. IEC 61010: CAT II
rated voltage AC/DC 1000V
rated current: 16 A
HIRSCHMANN TEST & MEASUREMENT PL 2600 SW RT - PL 2600 S test lead
19.77 EUR
Shock-proof test lead with dual-function safety test probe. Tip for piercing insulating and oxide layers and 4-mm diameter pin for insertion into sockets. 4-mm diameter safety plug with straight outlet. Incl. spike protection.• Plug Ø: 4 mm, sprung
• Socket Ø: 4 mm
• Lead: PVC 1.0 m
• Cable cross-section: 1 mm² (259 x 0.07)
• Rated voltage: 1000 V AC/DC
• Current rating: 16 A
• Resistance: 20 mOhm
• Measurement Category: CAT III (IEC 61010)
• Colour: red
HIRSCHMANN TEST & MEASUREMENT PRUEF 2600 SW - 4.0 mm safety test probe
13.04 EUR
Test probe with elastic, shatter-proof insulating sleeve and slender stainless steel tip. Tip for piercing layers of insulation/oxide. Connected via safety test leads. • Tip diameter: 2 mm
• Connection type: 4 mm socket, unsprung
• Rated voltage: 600 V AC/DC
• Rated current:
• Resistance: 50 mOhm
• Colour: black
HIRSCHMANN TEST & MEASUREMENT TW 120 BAN - TW 120 BAN SMD measuring tweezers
64.01 EUR
SMD measuring tweezers for 2 conductor measurements with multimeters. 2 gold-plated 4 mm banana plugs on gold-plated tweezer tips. The contact gold plating guarantees the lowest transmission resistances.• Cable length: 1.2 m
• Cable type: RG 174
• Rated voltage: 60 V DC/30 V AC
