GOOBAY 96329 - Cat.6a Flat 0300 Patch yellow 3m
12.43 EUR
Access the complete sheet with information, compare prices and discover the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
Cat.6a, U/UTP patchcable, (yellow)
To connect network components with 2 x RJ45 connectors.
EAN: 4040849963292
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
Cat.6a, U/UTP patchcable, (yellow)
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
EAN: 4040849963292
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
Comparison of Similar Products
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs)
- low bending radius
- OD only 1.5 x 6 mm
With the Keystone system there are no limits to the installation.
Take advantage of the modular connection system for standardised connectors and rectangular module receptacles (ports) in 14.9 × 17.0 mm pitch. The snap-in system enables a wide variety of connection techniques, e.g. with coaxial sockets for IEC or F connectors, RJ45 sockets (Cat.5, Cat.6, Cat.6A), loudspeaker connectors (cinch sockets, screw and clamp connectors) as well as USB, fibre-optic and HDMI sockets. The individual Keystone modules are universally applicable and interchangeable.
Technical data :
- LAN socket with robust plastic housing for optimum transmission of electrical or optical signals.
- CAT-6A built-in socket for network cables with an outer diameter of 5.0 - 9.0 mm
- With secure crocodile lock
- Terminal strip for tool-free LSA mounting
- No LSA installation tool is required for mounting
- Suitable for Power over Ethernet (PoE+) according to IEEE 802.3at
- RJ45 socket for installation in keystone patch panels, network sockets and housings
- Used, for example, in laboratories and workshops, in home entertainment and in network installations
- Field-terminable RJ45 jack for rigid conductors from 0.48 - 0.65 mm (AWG 22 - 26)
- RJ45 connections are TIA 568A/B colour-coded
- Patch panel (1 U) for mounting in 48.3 cm (19'') equipment cabinets
- Internal connection technology for LSA cutting terminal strips
- color marking according to TIA 568 A/B
- For cable diameters up to 0.64 mm (22-26 AWG), solid/stranded
- ''Easy Open'' housing without screws & tools
- Shielded ports
- Fastening screws included
Connectors
- Connection, shielding: yes
- Connection, type: 24x RJ45 jack (8P8C)
Device connectors
- Output, type: RJ45 jack (8P8C)
- Output, quantity: 24 x out
Cable
- Shielding class: STP
- Specification: CAT 6a
Signal transmission
max. bandwidth: 500 MHz
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs)
- low bending radius
- OD only 1.5 x 6 mm
- With latch protection (RNS®)
- Suitable for 10/100/1000/10,000 Base-T Ethernet networks (10-gigabit capable)
- 500 MHz
- Raw cable manufactured in accordance with Cat.-7 specifications
- 2x shielded RJ45 Cat.-6A plugs
- S/FTP cable (foil + braid shielding)
- PiMF (wires in pairs in metal foil)
- Inner conductor: AWG 26
- Conductor material and contacts made from 99.9% oxygen-free copper (OFC)
- Outer sheath diameter: 6.5 mm
- Flame retardant according to IEC 60332-1
- 1:1 assignment according to EIA/TIA-568B
- Halogen free according to IEC 60754-2
- Low smoke according to IEC 61034
- Gold-plated contact surfaces
- Suitable for various devices including patch fields, patch panels, switches, routers, modems with RJ45 port
- Length: 3 m
- Colour: yellow
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with gold plated contacts
- molded version with strain relief
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (600MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs)
- low bending radius
- OD only 1.5 x 6 mm
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with gold plated contacts
- molded version with strain relief
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
- Connectors: RJ45 male to RJ45 male (8P8C)
- Compatible with 10GBASE-T, 1000BASE-T and below
- Cable transmission frequency up to: 600 MHz
- Connector transmission frequency up to: 500 MHz
- Bandwidth up to: 10 GBit/s
- Pinning: EIA/TIA 568B
- Specification: raw cable CAT 7, RJ45 connector CAT 6a
- Downward compatible versions: CAT 6, CAT 5e and below
- Shielding class: U/UTP
- Construction cable: AWG 26/7
- Wire material: copper blend
- Connector: molded
- Contact surface: pins gold plated 3µ
- Plug material: plastic
- Kink protection: Yes
- Latching lug protection: Yes
- Cable type: round cable
- Cable jacket: PVC
- Diameter cable (approx.): 5.4mm
Use an RJ45 patch cable to connect your PC, smart TV, Ultrabook, game console or set-top box to a network router, network switch or to a network outlet.
- For installation in Keystone patch panels, boxes and enclosures, etc.
- Connectors are TIA 568A/B color coded
- Plastic housing
- Suitable for Power over Ethernet (PoE+) according to IEEE 802.3 at
- for rigid conductors 0.48 - 0.65mm, AWG 22 - 26
- for cable outer diameter: 5.0 - 9.0mm
Connectors
- Connection, type: RJ45 female (8P8C)
- Connection 2, type: terminal strip for LSA mounting (tool-free)
Cable
- Shielding class: UTP
- Specification: CAT 6A
Design
Construction type: alligator type
Signal transmission
Max. bandwidth: 500 MHz
Specification
- Connectors:
1 x RJ45 jack
1 x LSA (toolfree) - Cat.6A specification
- Shielded (STP)
- TIA-568A/B pinout
- For solid or stranded wire (26 - 22 AWG)
- For cable diameter: 5.0 - 8.5 mm
- For Keystone ports with 19.2 x 14.9 mm
- Material: zinc diecast
- Colour: yellow
- Dimensions (LxWxH): ca. 39.5 x 19.6 x 16.2 mm
Package content
- 10 x Keystone module
- 10 x cable manager
- 10 x cable tie
Package
- Poly bag
- Shielding class STP
- Specification CAT 6A
- max. bandwidth 500 MHz
The cable connector is designed for 8-wire connection, extension, repair or rerouting of CAT 6 data cables.
The big advantage compared to network junction boxes is the slim design.
Cable extensions can thus also be carried out without any problems where space is limited, e.g. in cable ducts.
Goobay always has the right product for your network connection. Simple. Everything. Fitting!
- Shielded cable connector (STP) for extension or connection of 2x LAN cables with RJ45 plugs
- Cable connector for outdoor and industrial applications offers protection against dirt and moisture (protection class IP68)
- With the connection module, network cables can be conveniently extended without having to re-route a complete cable segment.
- Very slim connection module with waterproof cable gland
- Max. Data transmission of 500 MHz guarantees an excellent, high-performance network connection
- Suitable for assembled patch cables with a cable diameter of 4.0 - 8.0 mm
- Supports PoE+ applications (IEEE 802.3at)
16.5 mm width, crocodile type, terminal block for LSA mounting (tool free).
- For installation in Keystone patch panels, boxes and enclosures etc.
- Connectors are TIA 568A/B color coded
- Plastic housing
- Suitable for Power over Ethernet (PoE+) according to IEEE 802.3 at
- for rigid conductors 0.48 - 0.65mm, AWG 22 - 26
- for cable outer diameter: 5.0 - 9.0mm
Connectors
- Connection, type: RJ45 female (8P8C)
- Connection 2, type: terminal strip for LSA mounting (tool-free)
Cable
- Shielding class: UTP
- Specification: CAT 6A
Design
Construction type: crocodile type
Signal transmission
Max. bandwidth: 500 MHz
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (600MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
Shielded RJ45 patch cable extension Cat.6A for transmissions according to ISO11801 for up to 10Gbit/s.
- Length tolerance: ±5
- Assignment according to TIA/EIA 568B
- Design: Shielded
- Latching lever protection
- Raw cable: Cat.6A
- Cable type: S/FTP
- Cable construction: 4x2
- AWG cross section: 26/7
- Conductor material: Copper
- Jacket material: LSZH
- Cable outer diameter: 6.2 mm
- Temperature range (operation): -15 - 60 °C
- Temperature range (storage): -20 - 75 °C
You have already installed a patch cable in your workroom/office. Previously, the cable was sufficient up to your device, but now that the office has been remodeled, it is no longer sufficient.
Instead of replacing the entire patch cable, because it has been laid elaborately, simply connect the RJ45 patch cable extension in the length that suits you to your end device.
In addition, the short version of the patch cable extension can be used to protect your device connections.
Especially in the home office, with a lot of assembly and disassembly of the e.g. notebook, the socket of the notebook is heavily stressed.
This can be circumvented by ''interposing'' the patch cable extension, because here you then claim the socket of the extension.
The RJ45 patch cable extension Cat.6A can be used with any conventional devices with RJ45 interface, such as, computer, notebook, DSL modem, router, switch, game console, TV and many more.
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (600MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
The GOOBAY fiber optic cable in OS2 quality for high-speed internet connects fiber optic sockets with switches, routers, network cabinets or internet boxes. The fiber optic cable is suitable for private and industrial applications, including fiber optics to the home (fiber to the home, FTTH), and is compatible with the FTTH offerings from Telekom Germany, Vodafone, German fiber optics, etc. The bend-optimized fiber optic cable (LWL) Glass fiber enables space-saving installation without increasing the attenuation and thus risking interference.
General :
- Fiber optic cable single mode designed for connection types such as FTTH, FTTB, FTTx and use at home, in the office, in data centers etc.
- As a patch cord, it forms the connection between the house transfer point (HÜP) and the fiber optic modem (ONT) indoors
- Fiber optic cable for up to 100 Gbit/s is bend-optimized and space-saving with a minimum bending radius of 30 mm (static)
- LSZH compliant: cable jacket is halogen free and flame retardant according to IEC 60754 2, IEC 60332 1 and IEC 61034
- Strain relief reinforced with aramid yarn ensures particular stability
- Equipped with dust protection caps, connector: Simplex, fiber type: OS2, SM singlemode 9/125µm according to ITU T G.657
- Individual test protocol with measurement of return loss (return loss) and insertion loss (insertion loss)
Specifications
Ports:
- Connector 1, type :SC-APC (8°) male
- Connector 2, type :SC-APC (8°) male
- Contacting : Ceramic Ferrule
Cables
- Diameter fiber optic core: 9 µ
- Diameter fiber optic jacket : 125 µ
- Wavelength : 1310nm
- Specification : Singlemode (OS2)
- Cable fiber type : Glass fiber G657.A2
- Cable Type : Simplex Cable
- Laying bending radius : 30 mm
- Cable jacket, material : LSZH
- Cable jacket diameter (approx.) : 3 mm
- Anti-kink protection : yes
- LSZH compliant : yes
General :
- Operating temperature from -40 °C
- Operating temperature up to 85 °C
Specification
- Connectors:
1 x RJ45 plug
1 x Keystone module RJ45 jack - Cat.6A specification
- Shielded (S/FTP)
- LSZH (halogen-free)
- TIA-568A/B pinout
- For Keystone ports with 19.2 x 14.9 mm
- Cable gauge: 26 AWG
- Cable length: ca. 3 m
- Colour: black / silver
System requirements
- A free RJ45 plug
Package content
- Cable
Package
- Zip poly bag
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (600MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
Connectors
- Contacting: EIA/TIA-568B
Cable
- Shielding class: U/UTP
- Specification: CAT 6A
- AWG: 26/7 (stranded)
- Diameter cable jacket (approx.): 5 mm
Signal transmission
- max. bandwidth 500 MHz
- PiMF = pairs in metal foil
- Category 7 raw cable
- RJ45 plugs cat.6
- Length imprint in moulded grommet
- Assignment according to EIA/TIA 568B
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (600MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (600MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (600MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (600MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (500MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (500MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
- assembled raw cable Cat 7, 600 MHz, S/FTP, PIMF, Halogen Free
- Cat 7 tested to 600 MHz
- Connections: Cat 6A (subscript), (500Mhz) RJ45 male - RJ45 male
- Pinning: TIA/EIA 568B
- Construction shielding: aluminum foil 0.025mm/ 80x0.12mm
- Cable construction: AWG 26/7
- Wire material: copper
- Connector material: gold plated 3µ
• Suitable for 10/100/1000 / 10000Base-T Ethernet networks (Gigabit capable)
• Cable Cat. 7 raw cable (500MHz) AWG26/7
• Cat.6A RJ45 (500 MHz) connector on both sides
• S/FTP cable (shielding foil + braid), outer jacket material Nylon braid (halogen-free)
• PIMF (cores in metal foil in pairs)
• Copper wires
• Assignment 1: 1 according to EIA / TIA-568B
• Gilded contact surfaces
• Suitable for various devices such as patch panel, patch panel, switch, router, modem with RJ45 connector
- assembled raw cable Cat 7, 600 MHz, S/FTP, PIMF, Halogen Free
- Cat 7 tested to 600 MHz
- Connections: Cat 6A (subscript), (500Mhz) RJ45 male - RJ45 male
- Pinning: TIA/EIA 568B
- Construction shielding: aluminum foil 0.025mm/ 80x0.12mm
- Cable construction: AWG 26/7
- Wire material: copper
- Connector material: gold plated 3µ
To connect network components with 2 x RJ45 connectors.
- pair-sequence acc. to EIA/TIA 568B
- with 3µ gold plated PINs
- molded version with strain relief
- OD only 1.5 x 6 mm
