GO-E CH-30-01 - go-e Controller
215.64 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
go-e Controller
By using a go-e Controller, you can charge your electric car or plug-in hybrid even more cost-effectively, safely and sustainably:
1. Maximise the self-consumption of your PV system.
2. Rely on dynamic load management to avoid overloading the power connection when charging electric vehicles.
3. Use energy monitoring to monitor the energy flows in your building.
The go-e Controller ensures that surplus electricity from a PV system is used to charge electric vehicles. In this way, you get the most out of your investment in a PV system because you increase your own consumption. Using dynamic load balancing, the go-e Controller prevents an overload of the house power supply by automatically reducing the charging power for electric cars and plug-in hybrids connected to go-e Chargers during detected load peaks and increasing it again later.
EAN: 9120087411832
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
go-e Controller
By using a go-e Controller, you can charge your electric car or plug-in hybrid even more cost-effectively, safely and sustainably:
1. Maximise the self-consumption of your PV system.
2. Rely on dynamic load management to avoid overloading the power connection when charging electric vehicles.
3. Use energy monitoring to monitor the energy flows in your building.
The go-e Controller ensures that surplus electricity from a PV system is used to charge electric vehicles. In this way, you get the most out of your investment in a PV system because you increase your own consumption. Using dynamic load balancing, the go-e Controller prevents an overload of the house power supply by automatically reducing the charging power for electric cars and plug-in hybrids connected to go-e Chargers during detected load peaks and increasing it again later.
- Energy monitoring
- Consumption optimisation: Use excess PV electricity efficiently
- Automatic phase switching
- Dynamic load management to prevent blackouts and peak shaving
- Convenient control
EAN: 9120087411832
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 6-8 business days
Condition: new
Comparison of Similar Products
GO-E CH-04-11-51 - go-e Charger Gemini 11 kW
586.71 EUR
Der go-e Charger Gemini 11 kW ist eine smarte Ladestation im zeitlosen Design zur Installation an einem festen Standort im Innen- und Außenbereich. Der Charger lädt Elektroautos und Plug-in-Hybride einfach, schnell und sicher.Über die App lassen sich bei Bedarf zahlreiche zusätzliche Komfortfunktionen verwenden. Die äußerst kompakte Wallbox eignet sich für die Verwendung durch Privathaushalte und kleine Firmen (sofern keine Verrechnung von Strom vorgesehen ist). Abgesehen von der Mobilität, bietet der go-e Charger Gemini den gleichen Funktionsumfang wie der go-e Charger Gemini flex (mit Stecker).Ein großer Vorteil bei der Installation im Vergleich zur klassischen Wandladestation - der go-e Charger Gemini kann von einem Elektriker schnell an jede bestehende Abzweigdose angeschlossen werden. Das spart Zeit und Kosten.
Der go-e Charger Gemini 11 kW ist das Nachfolgemodell des go-eCharger HOMEfix 11 kW.
Die Ladestation verfügt über ein 1,8 Meter langes Anschlusskabel zur festen Verbindung mit einer Stromverteilerdose. Somit hat der Charger im Gegensatz zum go-e Charger Gemini flex keinen Stecker und ist damit auch nicht mobil verwendbar. Die clevere Lösung für alle, die eine smarte Heimladestation zur reinen Wandinstallation benötigen.
Neben umfangreichen Sicherheitsfunktionen wie z. B. Gleichstromfehlerschutz (FI-Schutzmodul), Phasenerkennung und Erdungsmessung ist die Ladestation u. a. mit RFID für die Zugangskontrolle (Aktivierung über App bei Bedarf) sowie Hotspot/WLAN ausgestattet. PV-Anbindung über die API-Schnittstelle, Lastmanagement und Verwendung flexibler Stromtarife gehören ebenfalls zum Funktionsumfang. Mit der kostenlosen go-e Charger App lassen sich Komfort- und Grundeinstellungen ändern, wodurch sich das Gerät an das persönliche Ladeverhalten anpassen lässt und zu nachhaltigerem Laden einlädt.
Produktspezifikationen:
Abmessungen: ca. 15,5 x 26 x 11 cm
Gewicht: ca. 1,85 kg
Anschlusskabel: 1,8 m, 5 x 2,5 mm² (Typ H07BQ-F)
Anschluss: Ein- oder Dreiphasig
Nennspannung: 230/240 V (einphasig) / 400/415 V (dreiphasig)
Nennfrequenz: 50 Hz
Netzformen: TT/TN/IT
Standby-Leistung: 3,1 W (LEDs dunkel) bis 5,2 W (LEDs hell)
RFID: 13,56 MHz
WLAN: 802.11b/g/n 2,4GHz / Frequenzband 2412-2472Mhz
Ladeleistung:
Maximale Ladeleistung: 11 kW (16 A 3-phasig)
Ampere- und Statusanzeige: Über LED-Ring und App ablesbar
Einstellen der Ladeleistung: Per Druckknopf und App
Ladeleistung je nach Anzahl der Phasen des Onboard-Laders des Autos zwischen 1,4 kW und 11 kW verstellbar (über den Ladestrom in 1 Amperestufen zwischen 6 A und 16 A):
Einphasig ladendes Auto: 1,4 kW bis 3,7 kW (Länderspezifische Begrenzungen sind zu beachten)
Zweiphasig ladendes Auto: 2,8 kW bis 7,4 kW (Zweiphasiges Anschließen des Chargers ist nicht möglich)
Dreiphasig ladendes Auto: 4,2 kW bis 11 kW (go-e Charger schaltet die Leistung durch, welche am Anschluss...
GO-E CH-04-08 - go-eCharger Gemini wall mounting plate (replacement)
30.52 EUR
The additional wall bracket for the go-eCharger Gemini flex gives you the option to mount your mobile wallbox on the wall at a different location, such as a second home.Set includes:
- Wall mounting plate for go-eCharger Gemini flex
- Four dowels and four screws for mounting the wall bracket
- U-piece for optional cable locking (anti-theft - secured by padlock, not included)
- One screw and one dowel to secure the U-piece
GO-E CH-04-22-51 - go-e Charger Gemini 22 kW
591.87 EUR
Der go-e Charger Gemini 22 kW ist eine smarte Ladestation im zeitlosen Design zur Installation an einem festen Standort im Innen- und Außenbereich. Der Charger lädt Elektroautos und Plug-in-Hybride einfach, schnell und sicher.Über die App lassen sich bei Bedarf zahlreiche zusätzliche Komfortfunktionen verwenden. Die äußerst kompakte Wallbox eignet sich für die Verwendung durch Privathaushalte und kleine Firmen (sofern keine Verrechnung von Strom vorgesehen ist). Abgesehen von der Mobilität, bietet der go-e Charger Gemini den gleichen Funktionsumfang wie der go-e Charger Gemini flex (mit Stecker).Ein großer Vorteil bei der Installation im Vergleich zur klassischen Wandladestation - der go-e Charger Gemini kann von einem Elektriker schnell an jede bestehende Abzweigdose angeschlossen werden. Das spart Zeit und Kosten.
Der go-e Charger Gemini 22 kW ist das Nachfolgemodell des go-eCharger HOMEfix 22 kW.
Die Ladestation verfügt über ein 1,8 Meter langes Anschlusskabel zur festen Verbindung mit einer Stromverteilerdose. Somit hat der Charger im Gegensatz zum go-e Charger Gemini flex keinen Stecker und ist damit auch nicht mobil verwendbar. Die clevere Lösung für alle, die eine smarte Heimladestation zur reinen Wandinstallation benötigen.
Neben umfangreichen Sicherheitsfunktionen wie z. B. Gleichstromfehlerschutz (FI-Schutzmodul), Phasenerkennung und Erdungsmessung ist die Ladestation u. a. mit RFID für die Zugangskontrolle (Aktivierung über App bei Bedarf) sowie Hotspot/WLAN ausgestattet. PV-Anbindung über die API-Schnittstelle, Lastmanagement und Verwendung flexibler Stromtarife gehören ebenfalls zum Funktionsumfang. Mit der kostenlosen go-e Charger App lassen sich Komfort- und Grundeinstellungen ändern, wodurch sich das Gerät an das persönliche Ladeverhalten anpassen lässt und zu nachhaltigerem Laden einlädt.
Produktspezifikationen:
Abmessungen: ca. 15,5 x 26 x 11 cm
Gewicht: ca. 2,34 kg
Anschlusskabel: 1,8 m, 5 x 6 mm² (Typ H07BQ-F)
Anschluss: Ein- oder Dreiphasig
Nennspannung: 230/240 V (einphasig) / 400/415 V (dreiphasig)
Nennfrequenz: 50 Hz
Netzformen: TT/TN/IT
Standby-Leistung: 3,1 W (LEDs dunkel) bis 5,2 W (LEDs hell)
RFID: 13,56 MHz
WLAN: 802.11b/g/n 2,4GHz / Frequenzband 2412-2472Mhz
Ladeleistung:
Maximale Ladeleistung 22 kW (32 A 3-phasig)
Ampere- und Statusanzeige: Über LED-Ring und App ablesbar
Einstellen der Ladeleistung: Per Druckknopf und App
Ladeleistung je nach Anzahl der Phasen des Onboard-Laders des Autos zwischen 1,4 kW und 22 kW verstellbar (über den Ladestrom in 1 Amperestufen zwischen 6 A und 32 A):
Einphasig ladendes Auto: 1,4 kW bis 7,4 kW (Länderspezifische Begrenzungen sind zu beachten)
Zweiphasig ladendes Auto: 2,8 kW bis 14,8 kW (Zweiphasiges Anschließen des Chargers ist nicht möglich)
Dreiphasig ladendes Auto: 4,2 kW bis 22 kW (go-e Charger schaltet die Leistung durch, welche am Anschluss...
GO-E CH-10-12 - go-eCharger, RFID tags, 10x
27.42 EUR
RFID tags in the form of a key ring.Using these RFID tags, you can authorise and customise charging to your go-eCharger. For example, you can allocate an account each day and view the kWh charged via the account.
Please note that the go-eCharger must first be set up via the app before these features can be used.
Included in delivery:
10 x 13.56-MHz RFID tags for go-eCharger
AQARA RSDM01 - Aqara smart roller shade driver E1, HomeKit
69.85 EUR
The Aqara roller shade driver E1 is a retrofittable roller shade controller that requires no complicated installation and can work with your existing roller shade by operating the bead cord. It does not require dedicated cabling and can be connected to a power supply both wirelessly, using the built-in battery or via the supplied USB-C cable.
GO-E CH-05-11-01 - go-e Charger Gemini flex 2.0 11 kW
680.77 EUR
go-e Charger Gemini flex 2.0The go-e Charger Gemini flex 2.0 with integrated SIM card has arrived. The mobile wallbox delivers up to 11 kW charging power for 1 and 3-phase charging from 1.4 kW. The smart wallbox with even more connectivity can be used both in the wall bracket as a stationary unit or as a mobile unit.
Convenient charging at all times
The mobile wallbox with integrated SIM card enables you to charge your EV anywhere, even without WIFI. Simply plug the go-e Charger into a red CEE socket or use an adapter to a earthed contact socket or blue camping socket and the charging process will start straight away. Control and monitor the charge easily using the app if necessary.
Remote diagnostics and technical support are now even easier and more convenient thanks to the mobile phone connection. Troubleshooting and maintenance using firmware updates without the need for a ''workshop visit''.
Smart, secure charging. Even when you are on the go.
AQARA CH-C01E - Aqara Camera E1, surveillance camera, HomeKit
77.08 EUR
Aqara camera E1 - Smarter vision for a safer homeSuperior image quality and PT tracking
The E1 has a 2K sensor and a wide-angle lens with f/2.0 for excellent image quality and offers a 360° view and people tracking through pan/tilt motors.
Wide compatibility
The E1 is compatible with major platforms including Apple Home (with HomeKit Secure Video support), Alexa and Google Home.
In addition, functions such as pan/tilt can be controlled via third-party platforms*.
Cloud and local storage **
In addition to encrypted cloud storage in Aqara Home or Apple Home, the E1 supports local storage with a microSD card of up to 512 GB and can be backed up to SMB3-compatible NAS storage
Advanced Wi-Fi 6 connectivity
The E1 supports stable and secure Wi-Fi 6 connectivity.
This ensures optimal performance even in congested network environments while implementing the WPA3 standard for maximum security.
On-device detection for local automation
The integrated NPU enables advanced functions such as people detection and noise detection ***.
You can filter and automatically record motion events or trigger automation when a person is detected.
Data protection
When you activate privacy mode in Aqara Home, the E1 turns to your preferred angle (e.g. towards a wall) and turns off.
In addition, the microphone mute option improves privacy by disabling audio recording and transmission.
* By controlling these functions, scenes must be displayed via Aqara Home
** The E1 offers 24-hour storage of critical events in the Aqara Cloud without a subscription. HSV requires an iCloud subscription and offers 10-day storage. The microSD card is not included. A microSD card must be inserted for NAS storage.
*** Noise detection is not available at the time of launch and is expected to be added via a future OTA update. Person detection and sound detection are only available in Aqara Home.
PWRA XBGP0238-01 - PowerA controller, Xbox Series X S, wired, Midas
51.28 EUR
Take your game to the next level with the PowerA Advantage wired controller for Xbox Series X S- Advanced gaming buttons: Get an edge over the competition with two mappable buttons that you can program on the go, mid-game.
- 3-way trigger locks: Set the travel distance of the triggers with three different positions to pull off quicker actions in your favourite FPS games or go full throttle in a high-end race car.
- Dual rumble motors: Take your gaming experience to the next level, providing tactile feedback and sensations that bring your virtual worlds to life.
- Immersive impulse triggers: Provides reactive rumble sensations using built-in motors so you can feel the action of the game.
- Extra-long USB-C cable: Provides 3 m of distance for more comfort and flexibility than shorter cables.
- Headset compatible: Plug in your favourite 3.5-mm headset through the stereo headset jack.
- Officially licensed for Xbox Series X S and compatible with Xbox One and Windows 10/11.
INFINEON IRF 7413Z - MOSFET, N-Ch 30V 13A 0.01R 2.5W, SO-8
10.37 EUR
MOSFET transistorN-channel
30 V
13 A
SO-8
GO-E CH-05-11-51 - go-e Charger Gemini 2.0 11 kW
691.1 EUR
go-e Charger Gemini 2.0The go-e Charger Gemini 2.0 with integrated SIM card has arrived. The stationary wallbox delivers up to 11 kW charging power for 1 and 3-phase charging from 1.4 kW. The smart wallbox has even more connectivity for home or corporate car parks.
Convenient charging at all times
Wherever you use the new go-e Charger Gemini 2.0, the integral SIM card ensures you have access to your wallbox from anywhere, even without WIFI, so that you can benefit from its smart functions. Only the MQTT and Modubus TCP protocols still require WIFI due to the large amount of data and technical requirements.
Weak WIFI?
You don't have to worry that a poor WIFI connection could affect your smart charging experience. The factory-fitted SIM card in the go-e Charger Gemini 2.0 provides you with a free mobile phone connection for at least 5 years. It can also be extended beyond this. If you have a go-e controller, the two devices will work together seamlessly.
AQARA CH-C01 - Aqara Camera G2H Pro, surveillance camera, HomeKit
88.49 EUR
Aqara G2H Pro camera (HomeKit)Built-in Zigbee 3.0 hub
You can connect up to 128 Aqara sensors and controllers and enjoy home automation, remote control and third-party ecosystem support.
All-round compatibility
The G2H Pro now supports Apple Homekit, Amazon Alexa, Google Home and IFTTT and connects compatible children's devices to Home Kit, Alexa, Google Assistant and more.
HomeKit-enabled 2-way audio
You can make voice calls while watching video in real time and communicate with your family remotely.
A microphone is equipped for noise reduction and the recording distance is up to 5 meters.
Full HomeKit support
Apart from HomeKit Secure Video, it now supports all 4 modes of the HomeKit security system, which is also automatically synchronized with the Aqara Home Alert System.
IR night vision with invisible LEDs
Thanks to 940nm infrared night vision LEDs, the G2H Pro Camera Hub won't have that annoying glow that could disturb your sleep during the night.
NAS and microSD support with larger capacity
In addition to the microSD card, which now has an increased maximum capacity of up to 512 GB, the G2H Pro also supports local NAS storage using the Samba protocol.
Quick view with time lapse and event timeline
The G2H pro now supports the generation of time-lapse clips to summarize the day in a short video.
In addition, the event timeline makes each of the events on the video timeline visible.
Activity and privacy masking zones
Apart from the configurable activity zones, the G2H Pro has local privacy masking that can prevent certain parts of the image from being recorded or sent to third-party servers.
ECOVACS DEEBOT D-SO01-19 - Cleaning solution for Deebot, 1000 ml
51.24 EUR
Cleaning solution (1L)For X5 / T30S / N20 / T30 OMNI / X2 OMNI / T20 OMNI / T20e OMNI / X1 OMNI / T10 TURBO series
- Mild and low-foaming, no damage to the floor
- Professional cleaning, efficient decontamination
- Wild Bluebell fragrance, natural and fresh
Note:
Recommended single use: Two bottle caps (approx. 20 ml).
Scope of delivery:
- 1x cleaning solution (1L)
GW-INSTEK GPS-4303 - Linear DC Power Supply, 4 Ch, 3 A, 30 V
452.29 EUR
The GPS-Series are 2-4 channel, 180 to 200W output, linear DC power supplies. Overload and reverse polarity protection, and an output on/off switch keep the GPS-Series and their load safe from unexpected conditions. A High regulation (0.01%+3mV) and low ripple/noise (< 1mVrms, 5Hz~1MHz) are maintained for channel 1 and 2 in constant voltage mode. Automated cooling fan speed control minimizes fan noise according to load conditions, ensuring quiet operation. The GPS-Series are an ideal solution for lightweight, inexpensive bench-top or portable applications requiring high regulation and multiple outputs.Features
- 4 seperated output
- Four ''3 Digits'' LED displays
- 0,01% Load and input voltage change
- Output voltage: 0 - 30 V DC (CH1, CH2), 2,2 - 5,2 V DC (CH3), 8 - 15 V DC (CH4)
- Output current: 0 - 3 A
- low ripple and noise
- Tracking mode and Auto series / parallel operation
- output EIN / AUS-switch
- Fan speed control circuit to minimize fan noise
- Overload and reverse polarity protection
delivery content
power supply, manual, power cord, measurment cables
CESYS GMBH FPGA EFM-01 - Spartan3E FPGA Module, USB2.0
434.04 EUR
The EFM-01 embedded FPGA module is based on the Xilinx Spartan-3E® FPGA. This logic-optimized FPGA family is ideal for applications where logic densities are more important than I/O count. Combined with the powerful Cypress FX2LP ™ USB 2.0 controller, this FPGA is ideal for embedded control applications, logic integration and DSP co-processing.USB 2.0 High Speed Performance
With the UDK3 API and high-speed USB 2.0 connections, a real-time measurement rate of more than 40 MB/s can be achieved.
Multiple configuration options
You can configure the FPGA via the Xilinx Platform Cable (JTAG) using your own UDK-based software with the UDK3 Board Manager or from on-board flash memory. All these options are available at any time - no need to choose between switch and jumper.
Essential features
- Xilinx Spartan-3E® FPGA XC3S500E-4CPG132C
- Cypress FX2LB ™ USB2.0 high speed controller
- 4Mbit SPI flash
- 50 I/O signals, LVTTL 3.3V
- Reference design included
- Space saving
- Cost saving
Typical applications
- PC peripherals
- Video capture and processing
- Dongles
- Card readers
- Memory devices
- Customized test equipment
GO-E CH-02-20 - go-eCharger, micro-fuses
23.75 EUR
These fuses are specially designed for use with the go-eCharger. To prevent damage to the go-eCharger, only use fuses of this type!
Included in delivery:
10 x micro-fuse
STMICROELECTRONICS VIPER53SP-E - AC/DC offline switch, 300 KHz, 50W, PowerSO-10
14.07 EUR
OFF-line primary switchDescription
The VIPer53-E combines an enhanced current mode PWM controller with a high voltage MDMesh Power Mosfet in the same package. Typical applications cover offline power supplies with a secondary power capability ranging up to 30W in wide range input voltage, or 50W in single European voltage range and DIP-8 package, with the following benefits:
¦ Overload and short circuit controlled by feedback monitoring and delayed device reset.
¦ Efficient standby mode by enhanced pulse skipping.
¦ Primary regulation or secondary loop failure protection through high gain error amplifier.
Features
• Switching frequency up to 300kHz
• Current limitation
• Current mode control with adjustable limitation
• Soft start and shut-down control
• Automatic burst mode in standby condition (“Blue Angel“ compliant )
• Undervoltage lockout with Hysteresis
• HIgh voltage star-tup current source
• Overtemperature protection
• Overload and short-circuit control
STMICROELECTRONICS VIPER53DIP-E - AC/DC offline switch, 300 KHz, 50W, DIL-8
14.96 EUR
OFF-line primary switchDescription
The VIPer53-E combines an enhanced current mode PWM controller with a high voltage MDMesh Power Mosfet in the same package. Typical applications cover offline power supplies with a secondary power capability ranging up to 30W in wide range input voltage, or 50W in single European voltage range and DIP-8 package, with the following benefits:
¦ Overload and short circuit controlled by feedback monitoring and delayed device reset.
¦ Efficient standby mode by enhanced pulse skipping.
¦ Primary regulation or secondary loop failure protection through high gain error amplifier.
Features
• Switching frequency up to 300kHz
• Current limitation
• Current mode control with adjustable limitation
• Soft start and shut-down control
• Automatic burst mode in standby condition (“Blue Angel“ compliant )
• Undervoltage lockout with Hysteresis
• HIgh voltage star-tup current source
• Overtemperature protection
• Overload and short-circuit control
STMICROELECTRONICS VIPER53EDIP-E - AC/DC offline switch, 300 KHz, 50W, DIL-8
12.74 EUR
OFF-line primary switchDescription
The VIPer53E combines an enhanced current mode PWM controller with a high voltage MDMesh Power MOSFET in the same package. Typical applications cover offline power supplies with a secondary power capability ranging up to 30W in wide range input voltage, or 50W in single European voltage range and DIP-8 package and 40W in wide range input voltage, or 65W in single European voltage range and PowerSO-10 package, with the following benefits:
• Overload and short-circuit events controlled by feedback monitoring and delayed device reset
• Efficient standby mode by enhanced pulse skipping.
• Integrated start-up current source is disabled during normal operation to reduce the input power.
Features
• Switching frequency up to 300kHz
• Current mode control with adjustable limitation
• Soft start and shut-down control
• Automatic burst mode in standby condition (“Blue Angel“ compliant )
• Undervoltage lockout with Hysteresis
• Integrated start-up current source
• Overtemperature protection
• Overload and short-circuit control
• Overvoltage protection
• In compliance with the 2002/95/EC European Directive
GO-E CH-05-22-01 - go-e Charger Gemini flex 2.0 22 kW
676.63 EUR
go-e Charger Gemini flex 2.0The go-e Charger Gemini flex 2.0 with integrated SIM card has arrived. The mobile wallbox delivers up to 22 kW charging power for 1 and 3-phase charging from 1.4 kW. The smart wallbox with even more connectivity can be used both in the wall bracket as a stationary unit or as a mobile unit.
Convenient charging at all times
The mobile wallbox with integrated SIM card enables you to charge your EV anywhere, even without WIFI. Simply plug the go-e Charger into a red CEE socket or use an adapter to a earthed contact socket or blue camping socket and the charging process will start straight away. Control and monitor the charge easily using the app if necessary.
Remote diagnostics and technical support are now even easier and more convenient thanks to the mobile phone connection. Troubleshooting and maintenance using firmware updates without the need for a ''workshop visit''.
Smart, secure charging. Even when you are on the go.
GO-E CH-05-22-51 - go-e Charger Gemini 2.0 22 kW
866.82 EUR
go-e Charger Gemini 2.0The go-e Charger Gemini 2.0 with integrated SIM card has arrived. The stationary wallbox delivers up to 22 kW charging power for 1 and 3-phase charging from 1.4 kW. The smart wallbox has even more connectivity for home or corporate car parks.
Convenient charging at all times
Wherever you use the new go-e Charger Gemini 2.0, the integral SIM card ensures you have access to your wallbox from anywhere, even without WIFI, so that you can benefit from its smart functions. Only the MQTT and Modubus TCP protocols still require WIFI due to the large amount of data and technical requirements.
Weak WIFI?
You don't have to worry that a poor WIFI connection could affect your smart charging experience. The factory-fitted SIM card in the go-e Charger Gemini 2.0 provides you with a free mobile phone connection for at least 5 years. It can also be extended beyond this. If you have a go-e controller, the two devices will work together seamlessly.
DELOCK 84247 - Cable SATA 30cm red str/str
11.5 EUR
This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or Flash memories.Specification
- SATA II specification
- Data transfer rateSATA up to 3Gbps
- Length: 30cm
- Connector: straight / straight
Package
Poly Bag
DELOCK 85345 - SATA 6 Gb/s Cable straight to downwards angled 30 cm transparent
11.7 EUR
This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or Flash memories. It complies with the latest standard and provides a data transfer rate of up to 6 Gb/s. It is downwards compatible to the previous SATA versions, but can then only reach the respective transfer speed. When connecting this cable to a HDD the cable will be lead downwards. The metal clips on the connectors ensure that the cable reliably clicks into place.Specification
• Connectors:
1 x SATA 6 Gb/s 7 pin receptacle straight >
1 x SATA 6 Gb/s 7 pin receptacle downwards angled
• With metal clips
• Data transfer rate up to 6 Gb/s
• Downwards compatible to SATA 1.5 Gb/s and 3 Gb/s
• Cable gauge: 26 AWG
• Cable diameter: ca. 4.4 mm
• Colour: transparent
• Length without connectors: ca. 30 cm
System requirements
• A free SATA port
Package content
• SATA cable
Package
• Poly bag
DELOCK 82473 - Cable SATA 30cm yellow str/str Metall
11.5 EUR
This SATA cable by Delock enables you to connect different SATA devices, e.g. SATA-HDD, SATA controller, etc. Additional snap in will be provided by metal clips on the SATA connectors. Specification
- SATA II specification
- Data transfer rate: SATA up to 3Gbps
- Length: 30cm
- Metall Clips
- Connector: straight / straight
Package
Poly Bag
DELOCK 82523 - Cable SATA 30cm yellow re/ob Metall
11.5 EUR
This SATA cable by Delock enables you to connect different SATA devices, e.g. SATA-HDD, SATA controller as well as SATA Flash memory. Additional snap in will be provided by metal clips on the SATA connectors. Specification
- SATA II specification
- Data transfer rate: SATA up to 3Gbps
- Length: 30cm
- Metal Clips
- Connector: rechts/up
Package
Poly Bag
GW-INSTEK GPS-3303 - Linear DC Power Supply, 3 Ch, 3 A, 30 V
418.95 EUR
The GPS-Series are 2-4 channel, 180 to 200W output, linear DC power supplies. Overload and reverse polarity protection, and an output on/off switch keep the GPS-Series and their load safe from unexpected conditions. A High regulation (0.01%+3mV) and low ripple/noise (< 1mVrms, 5Hz~1MHz) are maintained for channel 1 and 2 in constant voltage mode. Automated cooling fan speed control minimizes fan noise according to load conditions, ensuring quiet operation. The GPS-Series are an ideal solution for lightweight, inexpensive bench-top or portable applications requiring high regulation and multiple outputs.Features
- 3 seperated output
- Four ''3 Digits'' LED displays
- 0,01% Load and input voltage change
- Output voltage: 0 - 30 V DC (CH1, CH2), 5 V DC (CH3)
- Output current: 0 - 3 A
- low ripple and noise
- Tracking mode and Auto series / parallel operation
- output EIN / AUS-switch
- Fan speed control circuit to minimize fan noise
- Overload and reverse polarity protection
delivery content
power supply, manual, power cord, measurment cables
GW-INSTEK GPS-2303 - Linear DC Power Supply, 2 Ch, 3 A, 30 V
371.61 EUR
The GPS-Series are 2-4 channel, 180 to 200W output, linear DC power supplies. Overload and reverse polarity protection, and an output on/off switch keep the GPS-Series and their load safe from unexpected conditions. A High regulation (0.01%+3mV) and low ripple/noise (< 1mVrms, 5Hz~1MHz) are maintained for channel 1 and 2 in constant voltage mode. Automated cooling fan speed control minimizes fan noise according to load conditions, ensuring quiet operation. The GPS-Series are an ideal solution for lightweight, inexpensive bench-top or portable applications requiring high regulation and multiple outputs.Features
- 2 seperated output
- Four ''3 Digits'' LED displays
- 0,01% Load and input voltage change
- Output voltage: 0 - 30 V DC
- Output current: 0 - 3 A
- low ripple and noise
- Tracking mode and Auto series / parallel operation
- output EIN / AUS-switch
- Fan speed control circuit to minimize fan noise
- Overload and reverse polarity protection
delivery content
power supply, manual, power cord, measurment cables
DELOCK 82472 - Cable SATA 30cm yellow ob/ge Metall
11.19 EUR
This SATA cable by Delock enables you to connect different SATA devices, e.g. SATA-HDD, SATA controller as well as SATA Flash memory. When connecting this cable to a HDD the cable will be lead to upwards. Additional snap in will be provided by metal clips on the SATA connectors. Specification
- SATA II specification
- Data transfer rate: SATA up to 3Gbps
- Length: 30cm
- Metal Clips
- Connector: up / straight
PackagePoly Bag
DELOCK 85341 - SATA 6 Gb/s Cable 30 cm transparent
12.73 EUR
This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or Flash memories. It complies with the latest standard and provides a data transfer rate of up to 6 Gb/s. It is downwards compatible to the previous SATA versions, but can then only reach the respective transfer speed. The metal clips on the connectors ensure that the cable reliably clicks into place.Specification
• Connectors:
1 x SATA 6 Gb/s 7 pin receptacle straight >
1 x SATA 6 Gb/s 7 pin receptacle straight
• With metal clips
• Data transfer rate up to 6 Gb/s
• Downwards compatible to SATA 1.5 Gb/s and 3 Gb/s
• Cable gauge: 26 AWG
• Cable diameter: ca. 4.4 mm
• Colour: transparent
• Length without connectors: ca. 30 cm
System requirements
• A free SATA port
Package content
• SATA cable
Package
• Poly bag
DELOCK 82606 - Cable SATA 30cm red re/ge Metall
11.4 EUR
This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or Flash memories. The metal clips on the connectors ensure that the cable reliably clicks into place.Specification
- SATA II specification
- Data transfer rateSATA up to 3Gbps
- Length: 30cm
- with metal clips
- Connector: rechts/straight
Package
Poly Bag
DELOCK 82492 - Cable SATA 30cm yellow li/ge Metall
11.6 EUR
This SATA cable by Delock enables you to connect different SATA devices, e.g. SATA-HDD, SATA controller as well as SATA Flash memory. When connecting this cable to a HDD the cable will be lead to the left. Additional snap in will be provided by metal clips on the SATA connectors. Specification
- SATA II specification
- Data transfer rate: SATA up to 3Gbps
- Length: 30cm
- Metal Clips
- Connector: links / straight
PackagePoly Bag
GO-E CH-11-03 - Type 2 to type 1 cable for electric vehicles, 7.4 kW, 5 m
215.64 EUR
go-e type 2 to type 1 cable, black, 7.4 kW 5 mWith the type 2 to type 1 adapter cable, all fully electric vehicles and plug-in hybrids, which have a connection for a type 1 connector on the vehicle, can be charged on a go-e charger (11 kW/22 kW) or any other charging stations with a type 2 socket.
- For single-phase charging
- Charging power: 1.4 kW - 7.4 kW
- Suitable for all vehicle makes
Adapter cable suitable for all electric vehicles with a connection for type 1 plugs and for all charging stations with a type 2 socket.
- Length: 5 m
- Weight: 2.30 kg
- Max. charging power: 32 A, single-phase
- Cable cross-section: 3 x 6 mm²
- Contacts: silver-plated
- Material: TPU
- Directives & Standards: 2014/35/EU (Low Voltage Directive) 2011/65/EU (RoHS) EN 50620:2017 EN 62196-1:2014 EN 62196-2:2017 CE certification
DELOCK 82474 - Cable SATA 30cm yellow un/ge Metall
11.5 EUR
This SATA cable by Delock enables you to connect different SATA devices, e.g. SATA-HDD, SATA controller as well as SATA Flash memory. When connecting this cable to a HDD the cable will be lead downwards. Additional snap in will be provided by metal clips on the SATA connectors. Specification
- SATA II specification
- Data transfer rate: SATA up to 3Gbps
- Length: 30cm
- Metal Clips
- Connector: down / straight
PackagePoly Bag
GO-E CH-10-07-6 - Type 2 cable for electric vehicles, 22 kW, 2.5 m
194.97 EUR
Type 2 cable for electric vehicles (up to 22 kW) 2.5 mBlack type 2 charging cable for maximum charging power of 22 kW (length: 2.5 m), suitable for all electric vehicles with a type 2 connector and for all charging stations with type 2 socket. Practical accessories for every go-e charger (11 kW/22 kW) and other charging stations with a type 2 socket. Also a good idea if the charging cable is tethered to the go-e charger.
- For single-phase & three-phase charging (also 11 kW)
- Charging power: 1.4 kW - 22 kW
- Suitable for all vehicle makes
The black charging cable is suitable for all electric vehicles with a type 2 plug (European standard) and for all charging stations with type 2 socket.
- Length: 2.5 m
- Weight: 3.29 kg
- Max. charging power: 32 A, three-phase
- Cable cross-section: 5 x 6 mm²
- IP protection class: IP55
- Contacts: silver-plated
- Material: TPU
- Colour: black
- Directives & Standards: 2014/35/EU (Low Voltage Directive) 2011/65/EU (RoHS) EN 50620:2017 EN 62196-1:2014 EN 62196-2:2017 CE certification
DELOCK 82127 - SATA 6 Gb/s Cable UV glow effect blue 30 cm
12.83 EUR
This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or flash memories. The metal clips on the connectors ensure that the cable reliably clicks into place.UV glow effect
The cable glows under ultraviolet light, e.g. under a UV fluorescent tube, and is therefore a real eye-catcher in any modding PC case.
• Connectors:
1 x SATA 6 Gb/s 7 pin receptacle straight >
1 x SATA 6 Gb/s 7 pin receptacle straight
• With metal clips
• Data transfer rate up to 6 Gb/s
• Downwards compatible to SATA 1.5 Gb/s and 3 Gb/s
• Cable gauge: 26 AWG
• Colour: blue
• Length without connectors: ca. 30 cm
System requirements
• A free SATA port
Package content
• SATA cable
Package
• Zip poly bag
DELOCK 82064 - SATA 6 Gb/s Cable UV glow effect green 30 cm
12.63 EUR
This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or flash memories. The metal clips on the connectors ensure that the cable reliably clicks into place.UV glow effect
The cable glows under ultraviolet light, e.g. under a UV fluorescent tube, and is therefore a real eye-catcher in any modding PC case.
• Connectors:
1 x SATA 6 Gb/s 7 pin receptacle straight >
1 x SATA 6 Gb/s 7 pin receptacle straight
• With metal clips
• Data transfer rate up to 6 Gb/s
• Downwards compatible to SATA 1.5 Gb/s and 3 Gb/s
• Cable gauge: 26 AWG
• Colour: green
• Length without connectors: ca. 30 cm
System requirements
• A free SATA port
Package content
• SATA cable
Package
• Zip poly bag
DELOCK 82805 - Cable SATA 6 Gb/s str/str 30 cm yellow Metall
12.01 EUR
This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or Flash memories. It complies with the latest standard and provides a data transfer rate of up to 6 Gb/s. It is downwards compatible to the previous SATA versions, but can then only reach the respective transfer speed. The metal clips on the connectors ensure that the cable reliably clicks into place.Specification
- Connector: SATA 6 Gb/s 7 Pin male straight > SATA 6 Gb/s 7 Pin male straight
- Data transfer rate up to 6 Gb/s
- Downwards compatible to SATA 1.5 Gb/s and 3 Gb/s
- Wire gauge: 26 AWG
- Cable: yellow
- Connector: black
- length incl. Connector: ca. 30 cm
System requirements
- A free SATA port
Package content
- SATA Cable
Package
Poly Bag
GO-E CH-002-0801 - Wall bracket for type 2 charging cable, with cable holder
43.96 EUR
Type 2 cable holderPractical, stylish cable holder for all charging cables with type 2 connector for safe storage when the electric vehicle is not charging. Reduces the stumbling risk. Straightforward wall mounting - the fastening materials are included in the scope of delivery.
Particularly if the charging cable is permanently or normally tethered to the charger, the cable holder creates a tidy look. Remove the charging cable from the car, roll it up on the holder in large loops and attach the Type 2 connector to ensure that the cable is stowed away tidily when not in use.
Scope of delivery
- SOMA cable holder for wall mounting for all charging cables with type 2 connector (charging cable not included)
- Fastening material: 2 dowels, 2 screws, 2 washers
Product specifications
- Robust, glass fibre-reinforced, high quality plastic with good UV stability
- Can be used indoors and outdoors in temperatures of -30°C to +100°C
- Dimensions: approx. 12.7 x 14.0 x 7.4 cm
- Colour: black
- Made in Germany
GO-E CH-10-07-7 - Type 2 cable for electric vehicles, 22 kW, 5 m
236.31 EUR
Type 2 cable for electric vehicles (up to 22 kW) 5 mBlack type 2 charging cable for maximum charging power of 22 kW (length: 5 m), suitable for all electric vehicles with a type 2 connector and for all charging stations with type 2 socket. Practical accessories for every go-e charger (11 kW/22 kW) and other charging stations with a type 2 socket. Also a good idea if the charging cable is tethered to the go-e charger.
- For single-phase & three-phase charging (also 11 kW)
- Charging power: 1.4 kW - 22 kW
- Suitable for all vehicle makes
The black charging cable is suitable for all electric vehicles with a type 2 plug (European standard) and for all charging stations with type 2 socket.
- Length: 5 m
- Weight: 3.29 kg
- Max. charging power: 32 A, three-phase
- Cable cross-section: 5 x 6 mm²
- IP protection class: IP55
- Contacts: silver-plated
- Material: TPU
- Colour: black
- Directives & Standards: 2014/35/EU (Low Voltage Directive) 2011/65/EU (RoHS) EN 50620:2017 EN 62196-1:2014 EN 62196-2:2017 CE certification
DELOCK 84978 - SATA 6 Gb/s receptacle straight > SATA receptacle straight, 30 c
12.74 EUR
This SATA cable by Delock enables the internal connection of various SATA devices, e.g. HDDs, controller cards or Flash memories. It complies with the latest standard and provides a data transfer rate of up to 6 Gb/s. It is downwards compatible to the previous SATA versions, but can then only reach the respective transfer speed. The metal clips on the connectors ensure that the cable reliably clicks into place.Specification
- Connector: 1 x SATA 6 Gb/s 7 pin receptacle straight > 1 x SATA 6 Gb/s 7 pin receptacle straight
- Data transfer rate up to 6 Gb/s
- Downwards compatible to SATA 1.5 Gb/s and 3 Gb/s
- Cable gauge: 26 AWG
- Colour: blue
- with gold coloured metal clip
- Length without connector: ca. 30 cm
System requirements
- a free SATA port
Package content
- SATA cable
Package
- Poly bag