FREI ZB 26 GE - Miniature coupling, 2.6mm, yellow

10.46 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Miniature coupling 2.6mm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Miniature coupling 2.6mm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

• Socket Ø 2 mm, spring-loaded
• Connection: soldered connection
• Rated voltage: 60 V DC
• Rated current: 6 A
• Resistance: 6 mOhm
• Colour: yellow


• Socket Ø 2 mm, spring-loaded
• Connection: solder
• Rated voltage: 60 V DC
• Rated current: 6 A
• Contact resistance: 6 mOhms
• Colour: yellow


Colour: yellow
Measuring category according to IEC 61010: CAT I
Standard: IEC 61010
Contact type: 4 mm socket (unsprung)
Connection type: soldering
Rated voltage: 30 V AC/60 V DC
Rated current: 16 A
Contact resistance: 3 mOhm

• Clamping width: 4 mm
• Connection type: 2 mm socket
• Rated voltage: 60 V DC
• Resistance: 5 mega-ohms
• Colour: yellow

• Clamping width: 4 mm
• Connection type: 2 mm socket
• Rated voltage: 60 V DC
• Resistance: 5 mega-ohms
• Colour: yellow

Platinum Hole / thickness: Ø3, 2 / 1, 6mm

Colour: yellow
Connection: soldered connection
Rated voltage: 30 V AC/60 V DC
Measurement category (IEC61010): 0
Current rating: 6 A
Contact: nickel-plated brass
Material: PVC-P
Temperature range (IEC61010): -15°C - +60°C

- Connection: M6 threaded bolt with lock nut
- Colour: yellow
- Rated voltage: 30 V AC/60 V DC
- Current rating: 36 A
- Contact: nickel-plated brass
- Bore: dia. 8 mm

The NA-AVP6 anti-vibration pads are compatible with the Noctua fans listed here. Please note that the NA-AVP6 pads cannot be used with other fans and are not compatible with fans from other manufacturers.
The NA-AVP6 anti-vibration pads are compatible with the following Noctua fans:
NF-A20 PWM
NF-A20 PWM chromax.black.swap
NF-A20 FLX
NF-A20 5V PWM
NF-A20 5V

Colour: yellow
Measuring category according to IEC 61010: CAT III
Standard: IEC 61010
Pen diameter: 4 mm
Contact type: 4 mm socket (unsprung)
Connection type: screws
Rated voltage: AC/DC 1000 V
Rated current: 24 A

Outside diameter: 5.95 mm


- Clamping jaws and spring made of stainless steel
- The flat part of the clamping jaws (fine wire section) enables secure clamping of the very thinnest wires
- Clamping of flat parts (solder tags) and wires possible up to a max. diameter of 4 mm
- Colour: yellow

High-quality T 250 series version

Safety built-in socket, 4 mm diameter, contact protected, with 6.3 x 0.8 tab connector to DIN 46 244, gold-plated brass. For installation in equipment chassis and control panels up to 6-mm wall thickness.
- Installation opening: 12.2-mm diameter
- Tightening torque: 50 Ncm
- Accessories: MW SEB mounting tool
Technical data
- Connection: tab connector 6.3 x 0.8 mm
- Rated voltage: AC/DC 1000 V
- Measurement category according to IEC61010: CAT III
- Rated current (note the derating curve): 32 A
- Contact socket material: brass, nickel plated
- Housing material: PA
- Temperature range according to IEC61010: -40°C to +80°C
- Flammability class according to UL 94 (applies only to housing base material): V-2

• 2.5 - 6.0 mm²
• Yellow

Primary: 230 V, 50 - 60 Hz
Secondary: 2 x 15 V, 2 x 26.6 A
* In accordance with VDE 0570
* Low leakage field
* Hum and noise almost entirely eliminated
* Open design with approx. 200-mm connectors
* Basic single hole mounting
* Protection class: IP00
* Insulation class: ta40
* Dimensions: 165 x 65 mm
* Weight: approx. 7.5 kg
Please be aware of connection assignment!

with internal reflector
Colour: yellow
Installation diam.: 6 mm
IP40, 12 volt, 42 mcd
With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful soldering.
Anode (+): brass plug contact
Cathode (-): tin-plated plug contact

Safety built-in socket, 4 mm diameter, contact protected, with 4.8 x 0.8 tab connector to DIN 46 244, gold-plated brass. For installation in equipment chassis and control panels up to 6-mm wall thickness.
- Installation opening: 12.2-mm diameter
- Tightening torque: 50 Ncm
- Accessories: MW SEB mounting tool
Technical data
- Connection: tab connector 4.8 x 0.8 mm
- Rated voltage: AC/DC 1000 V
- Measurement category according to IEC61010: CAT III
- Rated current (note the derating curve): 25 A
- Contact socket material: brass, nickel plated
- Housing material: PA
- Temperature range according to IEC61010: -40°C to +80°C
- Flammability class according to UL 94 (applies only to housing base material): V-2

with an external reflector.
Colour: yellow
Installation diam.: 6 mm
IP40, 12 volt, 41 mcd
With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful soldering.
Anode (+): brass plug contact
Cathode (-): tin-plated plug contact


with an external reflector.
Colour: yellow
Installation diam.: 6 mm
IP40, 24 volt, 24.5 mcd
With series resistor for direct connection to the supply voltage. Connection via 2.0/2.8 mm Faston contact or careful soldering.
Anode (+): brass plug contact
Cathode (-): tin-plated plug contact

type: MSEB 2610 F 2,8 Au yellow
system: 2 mm safety system
colour: yellow
measurement cat. acc. IEC61010: CAT III
type of termination: tab 2,8 x 0,8 mm
rated voltage AC/DC 1000V
rated current: 10 A
contact resistance: 5 mOhm
contact material: brass
contact surface material: Gold

A practical tool in the workplace. Simply drag and cut and the desired length.
Diameter before shrinking: 3.2 mm
Diameter after shrinking 1.6 mm
Wall thickness after shrinking: 0.51 mm
Length: 15 m
Color: yellow / green
Material: Polyolefin, Self-extinguishing
Shrink ratio: 2:1
Shrinkage at:> 90 ° C
Resistance after processing: -55 ° C to +135 ° C
Approvals: MIL, UL, CSA

• Channel Class EA up to 500 MHz (Category 6A) for wires (AWG 24/7), (AWG 26/7), (AWG 27/7)
• Core insulation approximately 0.9 - 1.0 mm
• cable diameter max. 6.6 mm
• Temperature range: -25 ° C. .. +60 ° C (operation + storage)
• Voltage: 125 V AC
• Current rating: 1 A

2X Mignon (AA)
Dimensions: 57.5 x 26 x 16.6 mm
Connection: with push-button (9V block)

- Category 6 patch cable
- Shielding: S/FTP shielded
- 4 pairs twisted
- Cable gauge: AWG27
- Jacket: LSOH
- 7 different lengths
- With slim grommet!

- Length: 2.0 metres
- Colour: yellow
- PiMF = pairs in metal foil
- Category 6
- RJ45 plug cat.6
- Length imprint in moulded grommet
- Assignment according to EIA/TIA 568B