FREI PV-B - Grooved pin shoes, 1.5 - 2.5mm², blue
10 EUR
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; falls into the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Grooved pin shoes
Up to 27 A / 600 V max.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Grooved pin shoes
Up to 27 A / 600 V max.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
Butt connectors are squashed, insulation shrunk at approx. 120°C. Interior insulation coated with adhesive for sealing the transition insulation/cable.
Butt connectors are squashed, insulation shrunk at approx. 120°C. Interior insulation coated with adhesive for sealing the transition insulation/cable.
Type FLRY
Insulation reduced
2.5 mm²
5 m coil
Red
The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Good thermal conductivity
- Lower compressibility
- Easy to use
- Electrically non-conductive
- Outstanding price-performance ratio
The thermal pads are suitable for SSDs, graphics card coolers, GPU water coolers and electronic components such as voltage converters and RAM chips.
- Good thermal conductivity
- Lower compressibility
- Easy to use
- Electrically non-conductive
- Outstanding price-performance ratio
Barrel and cap made from PP for a guaranteed long service life
• Universal pen for overhead projectors and almost all surfaces, also suitable for CDs/DVDs
• Superbly smear-proof and waterproof on almost all surfaces
• Dries in seconds, making it perfect for left-handers
• Permanent, low-odour ink
• Excellent colour brilliance
• With clip
• Airplane-safe — automatic pressure equalisation stops the pen leaking on aeroplanes
• Xylene and toluene-free ink
Barrel and cap made from PP for a guaranteed long service life
• Universal pen for overhead projectors and almost all surfaces, also suitable for CDs/DVDs
• Superbly smear-proof and waterproof on almost all surfaces
• Dries in seconds, making it perfect for left-handers
• Permanent, low-odour ink
• Excellent colour brilliance
• With clip
• Airplane-safe — automatic pressure equalisation stops the pen leaking on aeroplanes
• Xylene and toluene-free ink
Barrel and cap made from PP for a guaranteed long service life
• Universal pen for overhead projectors and almost all surfaces, also suitable for CDs/DVDs
• Superbly smear-proof and waterproof on almost all surfaces
• Dries in seconds, making it perfect for left-handers
• Permanent, low-odour ink
• Excellent colour brilliance
• With clip
• Airplane-safe — automatic pressure equalisation stops the pen leaking on aeroplanes
• Xylene and toluene-free ink
Bayonet (T) shank
Ref. no. T118B
Serrated length: 55 mm
Tooth pitch: 2 mm
Example application: sheet metals 2.5 - 6 mm
Type FLRY
Insulation reduced
2.5 mm²
10 m coil
Red
Type FLRY
Insulation reduced
2.5 mm²
50 m coil
Black
Type FLRY
Insulation reduced
2.5 mm²
50 m coil
Red
Type FLRY
Insulation reduced
2.5 mm²
100 m coil
Red
• Can be wiped, dry and free of residues, from whiteboards and surfaces such as glass and porcelain
• Quick drying, low-odour
• Blocked point
• DRY SAFE — can be left open for days without drying out (conditioned atmosphere pursuant to ISO 554)
• Barrel and cap made from PP for a guaranteed long service life
• Airplane-safe — automatic pressure equalisation stops the pen leaking on aeroplanes
• Xylene and toluene-free ink
• Refillable
Barrel and cap made from PP for a guaranteed long service life
• Universal pen for overhead projectors and almost all surfaces, also suitable for CDs/DVDs
• Superbly smear-proof and waterproof on almost all surfaces
• Dries in seconds, making it perfect for left-handers
• Permanent, low-odour ink
• Excellent colour brilliance
• With clip
• Airplane-safe — automatic pressure equalisation stops the pen leaking on aeroplanes
• Xylene and toluene-free ink
• Superbly smudge-proof and waterproof
• Dries in seconds, making it perfect for left-handers
• Colour-intensive, low-odour ink
• The colour black is light resistant and weather proof
• Blocked point
• Barrel and cap made from PP for a guaranteed long service life
• DRY SAFE — can be left open for days without drying out (conditioned atmosphere pursuant to ISO 554)
• Airplane-safe — automatic pressure equalisation stops the pen leaking on aeroplanes
• Xylene and toluene-free ink
• Refillable
- Permanent marker for marking and labelling almost all materials, e.g. paper, cardboard, metal, plastic and glass
- The bullet tip has a stroke width of 1.5 - 3 mm
- Water-resistant and abrasion-resistant on almost all surfaces
- The ink is low-odour and has no added toluene/xylene
For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine.
• Low-odour ink
• Refillable
• Stroke width: approx. 1.5 - 3.0 mm
• Colour: blue
Cap-off time: up to a few days. The cap-off time has been tested under laboratory conditions
For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine.
• Low-odour ink
• Refillable
• Stroke width: approx. 1.5 - 3.0 mm
• Colour: blue
Cap-off time: up to a few days. The cap-off time has been tested under laboratory conditions
Pencil case with 8 Textsurfer classic INK-JET SAFE neon colours and 12 Textsurfer classic COLOURS pastel & vintage
Product Information
- Highlighter with large ink reservoir for extra-long highlighting performance
- Ink-jet safe - does not blur ink-jet prints or handwritten text
- Violet and turquoise for documents which are to be copied
- For paper, fax and carbon copies
- Fast-drying
- Twist cap for easy opening
- PP barrel and cap guarantee long service life
- Aeroplane-safe - automatic pressure equalisation prevents pen from leaking on aeroplanes
- Ultra-soft chisel tip approx. 1 - 5 mm
- Refillable
Weller suction nozzles are designed to remove solder from all types of solder joints. They are heated and melt the solder. When the vacuum on the desoldering iron is switched on, the liquid solder is extracted via the tube in the nozzle into the solder collector.
- Insulated shrink connector for permanent use in the electrical field
- Crimp connectors can be installed easily and quickly using a crimping tool (crimping tool not included).
- Crimping sleeves have a high tensile strength and reliably protect the crimped cable ends.
- Supplied in a set consisting of 100 crimp connectors
- Cable connectors are approved for a current strength of up to 27 A.
Details:
- Paint marker with calligraphy tip. Ideal for writing, painting, crafting and decorating on smooth surfaces such as glass, plastic, metal
- Opaque ink for long-lasting results outdoors and indoors
- The pigment ink dries quickly: easy and clean application
- Special tip for fine and wide lines, as well as calligraphy writing
- For unlimited creativity with birthday cards and wrapping paper
- The edding 753 gloss paint marker, calligraphy, is available in black, white, gold, silver and copper
- Other line width available as edding 755
Details:
- Durable indoors and outdoors. With high-quality aluminium shaft. High-quality name-brand product.
- Paint marker. Ideal for drawing, painting, crafting and decorating on smooth surfaces such as glass, plastic, metal
- Opaque ink for long-lasting results indoors and outdoors
- The pigment ink dries quickly: easy and clean to use thanks to a valve system for steady ink flow
- For unlimited creativity with bullet journals and hand lettering
- Available in 22 colours
- Other line widths available as edding 750 and edding 780
- Replacement tips available
Set of acrylic pens with fine tips for use on various surfaces such as canvas, paper, wood, stone and terracotta.
Acrylic markers for painting on dark and light surfaces, ideal for materials such as canvas, drawing paper, wood, stone or terracotta. The round tip has a stroke width of 1 - 2 mm. The high-quality water-based pigmented acrylic paint is opaque, lightfast, low-odour and permanent when dry. The set contains the colours sun yellow, pastel green, hazelnut, rich gold and anthracite. Suitable replacement tips (edding 5300 replacement tips) are available. Weatherproof when dry.
Acrylic markers are a modern tool and the perfect complement to any artist's equipment. The acrylic paint in marker format is easier to handle than conventional acrylic inks in tubes. The valve system allows the paint to be applied directly to the surface and ensures a uniform ink flow.
Included in delivery
- 5x acrylic markers, natural colours
- Volume at 20 cm: 80 dB
- Current: 20 - 25 mA
- Power supply: 4 - 8 V
- Colour: black
- Innovative and extremely compact quadruple bit - just one bit for four different screw sizes
- Suitable for hexagon socket screws 2.5, 5.0, 6.0 and TORX® screws TX 25
- Tough, for universal use
- 1/4-inch hexagon drive (Wera Connection Series 1)
The 9507 4-in-1 bit
Using the 9507 4-in-1 bit, it is possible to actuate three sizes of hexagon socket screws (2.5, 5.0, 6.0) and one size of TORX® screws (TX 25). To use the respective larger profile, the spring force must be continuously pressed against the screw to ensure that the smaller profile is countersunk and the larger profile can be inserted.
Tough bits
Tough Wera bits reduce premature tip breakage. Z bits are generally used for universal screwdriving applications.
Included in delivery:
- 1x 9507 4-in-1 bit 2, 2.5, 5, 6 x TX 25 x 37 mm
Thanks to an offset design with round struts, the NA-FG1 guards offer excellent protection with minimal impact on the fan's acoustics and flow rate. The included tool-free push-pin mounting system not only makes installation a breeze, even if the fans are already installed in a PC system, it also introduces an additional 5-mm offset in order to achieve even lower influx turbulence, further improved running smoothness and better airflow performance.
The high-quality matte black finish and the Noctua logo at the centre make the NA-FG1 grilles a visual testament to Noctua's renowned premium quality.
¼ hexagon, suitable for holders as per DIN ISO 1173-D 6.3.
The application is very simple: Strip the cable and insert it into the plug on both sides until the stripped cable ends overlap or twist under the soldering ring. Even heating at the melting temperature on the solder until it has melted - preferably with a hot air gun or a hot air blower - finished. The maximum current is limited by the conductor cross-section of the cable used, its conductor material and the quality of the solder joint.
• Brass, galvanically tin-plated
Dimensions: 6.3 x 0.8 mm
Hole size: 5.3 mm
Angle: 2 x 45°
For screw or rivet mounting. Locks into board using plug-in legs.
- with guide pin
- curved
- fine tip serrated
- with antiallergic coating
- shape 22b
- material quality steel
- surface matt lacquered
- total length 150 mm
- weight 23 g
- bent tips
