FREI KRAD SD14 - Motorcycle - DIN socket, 4165, 12 V, 0.8 m
22.3 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Instead of the standard stuffing cover, this compact socket has a high-quality spring-loaded hinged cover, known from the series on-board sockets of vehicle manufacturers.
The socket in insulating plastic is equipped with high-quality cables and removable cable contacts.
The scope of delivery includes a fuse holder with fuse (7.5 A) that can be flexibly installed and a mounting bracket for attachment to the pipe linkage.
• with spring hinged lid
• compact design
• with mounting bracket
• hole diameter: 18 mm
• original equipment quality
EAN: 4014771900199
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Instead of the standard stuffing cover, this compact socket has a high-quality spring-loaded hinged cover, known from the series on-board sockets of vehicle manufacturers.
The socket in insulating plastic is equipped with high-quality cables and removable cable contacts.
The scope of delivery includes a fuse holder with fuse (7.5 A) that can be flexibly installed and a mounting bracket for attachment to the pipe linkage.
• with spring hinged lid
• compact design
• with mounting bracket
• hole diameter: 18 mm
• original equipment quality
EAN: 4014771900199
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
FREI KRAD BA13 - Motorcycle - DIN plug, 4165, 15 A
15.64 EUR
Inside you will find solid screw terminals to hold the cable.• high quality screw contacts
• only 2 parts
• compact design
FREI KRAD BA12W - Motorcycle - DIN angle plug, 4165, 8 A, splash-proof
19.56 EUR
A compact DIN angled plug suitable for BMW, Ducati, or Triumph series on-board sockets. Due to the angled cable outlet, the cable does not stand out as far as straight plugs when driving. The splash-proof housing with seal can be opened with a central screw. Inside, there is a screw contact for both poles, which can also be used for soldering. The hole of the cable grommet is conical and can be adapted to the respective cable diameter by cutting it off at different points.• compact angle design
• high quality screw solder contacts
• adjustable cable grommet
• splash water protected
FREI KRAD SD22 - Motorcycle - DIN socket, 4165 - without accessories
18.06 EUR
This is a high quality built-in socket with spring hinged cover without any other accessories.• with spring hinged cover
• smallest design
• original equipment quality
• hole diameter 18 mm
FREI KRAD BA1 - Motorcycle - Multiconnector f. Battery connector
14.55 EUR
The multiconnector cable is used for direct battery connection in the vehicle. The open system connector can then be quickly connected to chargers that have the corresponding system connector.• quick connector, ideal for various vehicles.
• with connector locking cap
• dimensions (L x W x H): 58 x 17 x 6 mm
• cable length: 250 mm
• cable lug: 6 mm
FREI KRAD BA08 - Motorcycle - battery connection cable, EC5 clutch
20.18 EUR
The battery connection cable (with the EC5 coupling) is firmly mounted on the battery with the 6 mm ring cable lugs. If the vehicle is equipped with a corresponding counterpart (EC5 connector), a tool-free and short-circuit-free battery installation/removal is possible by simply plugging it together.
• interesting for high quality batteries, which are to be used in different vehicles by plugging them together.
• easy battery removal for battery charging at home, at pitches without 220 V connection
• battery installation/removal without risk of short circuit
• some start boosters on the market can be coupled directly
FREI KRAD BLE2 - Motorcycle - Mini Flashing Buzzer
22.3 EUR
Modern piezo technology in an attractive housing for permanent reminder of switched on turn signals• mini housing (instead of the big Far East horn design)
• only 3 cables to connect
• loud piezo technology
• Made in Germany
Note for mounting
For mounting simply screw to the 2 cover holes (piezo opening tilted down) of the vehicle or connect with cable ties.
Connect the black wire with cable lug to the vehicle ground and clamp the gray turn signal wires with enclosed clamp connectors to the live turn signal wires left and right.
FREI KRAD ES03 - Motorcycle - cable distributor set
19.24 EUR
Allows the connection of max. 5 cable lugs to one battery terminal. With the collecting screw, the cable lugs of various consumers such as on-board socket, grip heater, electronic protector, retrofit warning flasher, turn signal reminder, chain oiler, etc. are combined and each led to the battery with a cable (red/black). The connecting cable is equipped with an 8 mm cable lug on one side to connect to car or motorcycle batteries. Insulated with 2 plastic housings, which can be additionally secured with a cable tie for safety. For the red cable to the positive pole is a flexible fuse with holder included.• for max. 5 cable lugs each
• 7.5 A fuse
FREI KRAD BA12 - Motorcycle - angle plug, DIN4165, 8 A
17.18 EUR
This compact DIN angled plug fits e.g. the BMW standard on-board socket. Due to the angled cable outlet, the cable does not stand out as far as conventional plugs when driving.The plastic housing can be unscrewed and you will find the possibility to screw or solder the cables + and -.
• high quality screw contacts
• only 2 parts
• compact design
FREI HS 35X15 1M U - DIN rail 35 x 15 mm, unperforated 1 m.
14.08 EUR
In accordance with EN 60715, zinc-plated, unperforated
FREI KRAD SV200 - Motorcycle - SAE extension cable, 2 m
19.24 EUR
Extension cable from the charger to the vehicle - for devices with system connector.
FREI KRAD BA09B - Motorcycle - battery connection cable, EC5 connector
22.56 EUR
The vehicle connection cable (with EC5 plug) is firmly connected to the ring terminals of the vehicle electrical system. Attention, the screwed ring cable lugs must be completely covered with insulating tape and insulated.After that, a battery with EC5 coupling can be contacted without tools.
• quick connector for batteries with battery cable EC5-coupling
• Battery installation/removal without risk of short circuit
FREI KRAD USB17 - Motorcycle - tank bag cable, USB-A / USB-C
40.86 EUR
The tank bag cable is equipped with a compact DIN angle plug on the vehicle side and a USB twin charger (USB-A and USB-C) on the tank bag side.It is ideal to plug into standard on-board sockets of BMW, Triumph and Ducati, or into a small retrofitted DIN on-board socket (SD14/22) and allows simply by inserting it into the tank bag to charge USB consumers such as cell phone, camera or other power consumers.
• compact DIN angle plug
• USB-A and USB-C socket, each 3.6 A
• no vehicle installation
• power consumption only when plugged in
• 1,5 m cable
Technical specifications
• housing dimensions (L x W): 70 x 35 mm
• total length: 1500 mm
• weight: 95 g
FREI HS 35X15 1M - DIN rail mounting 35 x 15 mm, perforated 1 m
13.98 EUR
Galvanised according to EN 50022Holes: 18x5.2 mm
Hole pitch: 25 mm
FREI KRAD USB18 - Motorcycle - USB-C socket, 3.6 A, LED, can be switched off
35.58 EUR
The USB twin on-board socket converts the input voltage of 12/24 V vehicle electrical systems to USB standard 5 V. It has 2 USB-C output sockets and offers a combined maximum charging power of 3.6 A QC Quickcharge. The output sockets can be switched off completely via the central switch so as not to drain the vehicle battery unnecessarily. Operational readiness is signaled by a green LED.
The 1.5 m connection cable allows flexible vehicle installation on the handlebar or tube linkage using the cable ties supplied.
Installation in an 18 mm hole diameter is also possible.
Specifications
• outputs: 2x USB-C with max. 3.6 A Quickcharge
• can be switched off
• with LED power indicator
• flexible installation due to 1.5 m cable length
• built-in fuse with holder
• protected design
FREI KRAD BA70 - Motorcycle - starter cable, 1.6 m
33.52 EUR
Handy motorcycle starter cable with protection circuit. With a normal car starter cable it is often very difficult to contact the small motorcycle battery terminals. This works better with this special starter cable. The pliers are of course fully insulated and can be opened wide enough to clamp on car and motorcycle batteries. This starter cable has the startsafe ® protection circuit in the middle, which reduces dangerous voltage peaks. This is especially important for vehicles with a lot of electronics such as ABS, injection, navigation, etc.. Motorcycles up to max. 1400 cc are allowed to be jump-started.
• fully insulated pliers
• total length 1,6 m
• copper cable, cross section 6 mm
• with startsafe ® protection circuit
• starting aid up to max. 1400 ccm
dimensions (L x W x H): 80 x 25 x 15 mm
Cable length: 1500 mm
FREI KRAD BS12 - Motorcycle - starter cable, 1.6 m, 6 mm²
28.45 EUR
Starter cable with plug and pliersSuitable for vehicles equipped with an on-board socket. The starter cable offers two-wheelers and quads the easy and quick way to give / take jump start.
• total length with pliers: 160 mm
• flexible copper cable with a large cross-section of 6 mm².
• fully insulated, small battery pole pliers
• up to max. 1400 ccm
FREI KRAD USB12 - Motorcycle -Mini USB on-board socket, 12 V/5 V, 2 A
30.11 EUR
The mini-USB on-board socket with 2 A converts the input voltage from 12 V to USB standard 5 V.The housing is weatherproof with IP54, the 1.2 m long cable with battery cable lugs allows flexible installation on the handlebar or pipe linkage.
The housing has a groove on both sides for optimal attachment with cable ties.
• waterproof IP54 housing
• flexible installation due to 1.2 m cable length
• fuse and holder included in delivery
• universal fastening
Technical specifications
• dimensions (L x W x H): 47 x 37 x 19 mm
• weight: 87 g
• cable: 1200 mm
• cable lug: 6 mm
• Voltage: IN 12 V / OUT 5 V
• Charging power: max. 2.1 A
FREI KRAD ZA01 - Motorcycle - ZIG socket, 1.3 m
23.34 EUR
This compact socket is designed for all devices that need to be powered on the motorcycle, scooter or quad. Primarily navigation devices, cell phones, etc.. Of course, it then also becomes interesting to use this battery interface immediately for battery conservation.
The ''inside'' consists of high-quality components, which are also used by the European automotive industry. A connector sits here best possible and tight in the housing!
• most compact design in aluminum housing
• high quality plug contacts
• long connection cable: 1.3 m / 1 mm²
• integrated mounting bracket for handlebar or linkage
• possibility for hole mounting
Note for mounting
The cigarette lighter on-board socket can be easily mounted on the linkage or handlebar with the integrated mounting bracket using cable ties. Panel mounting with trim hole (27 mm) is also possible. The long 1.3 m connection cable extends to the handlebar. The accessory fuse can be mounted freely in an ideal position in the vehicle.
FREI KRAD BA18 - Motorcycle - battery disconnector, mini, 160 A
27.83 EUR
Fully insulated battery disconnect switch in mini design for motorcycles, scooters and quads to disconnect the battery from the on-board power supply. This can prevent constant consumers such as clock, memories, immobilizer, USB sockets discharge the battery in longer standstills. However, the battery disconnection can also provide additional theft protection, as the vehicle can no longer be started.• flexible mounting between battery (-) pole and vehicle
• fully insulated
• max. 160 A - 12 V / 10 sec.
FREI KRAD BS11 - Motorcycle - system board socket
27.21 EUR
System on-board socket for fixed installation.For jump starting/giving, battery charging, as well as for powering accessories with the appropriate plug.
• splash-proof with hinged cover
• short time current 90 A
• strong copper cable: 0,65 m /6 mm²
• hole diameter: 26 mm
FREI AVK 102 - 5-pin DIN plug to 2x RCA connector
10.78 EUR
Audio/video cable• 1x 5-pin DIN plug to 2x RCA connector
• Length: 0.20 m
FREI KRAD MC925 - Motorcycle - phone holder, Qi charger, 71-90 mm
167.78 EUR
Phone holder (71 - 90 mm) / QI charging function (wireless)This is a motorcycle phone holder with wireless QI charging function (induction charging) for phones 63-72 mm wide. The high-quality aluminum holding plate with central screw ensures a secure hold of the cell phone, is vibration damped and can be rotated by 90°.
The large active charging surface with 3 integrated charging coils provides the charging power supply and a cooling function to prevent the phone from heat shutdown.
The power supply is protected against thermal overload and is provided by the device cable (0.4 m) with waterproof plug and the connection cable (1.4 m) with small DIN plug for on-board sockets. The latter can be replaced by enclosed terminal connectors to prevent battery discharge when stationary and can be clamped to a line switched via ignition.
The enclosed sturdy metal bracket with tilt joint is designed for tubular linkage or handlebars of 12 -29.5 mm diameter.
• for smart phones with width 71 - 90 mm
• large active charging surface with 3 charging coils, max. 2.5 A
• vibration damped ALU housing plate with cooling function
• incl. approx. 1.8 m cable set with DIN plug
• universal pipe holder 12 - 29,5 mm diameter, 90° rotatable
• waterproof IP68, with thermal overload and overvoltage protection
• QI registered - Made in Europe
Specifications
• Operating voltage: IN: 12-48V DC / OUT 9V DC
• charging current: max. 2 A (autom.)
• current consumption: 10 - 20 mA
• Product dimensions: 118 x 92 x 59 mm
FREI AVK 196 - Scart plug to 3 RCA socket + 4-pin mini-DIN socket
11.09 EUR
Scart plug to 3 RCA sockets and 4-pin mini-DIN socket with IN/OUT switch.
FREI AVK 198 - Scart plug to 3 RCA socket + 4-pin mini-DIN socket
12.33 EUR
Scart adapter with In/Out switchScart plug to
1x Scart socket,
2x RCA sockets (audio),
1x RCA socket (video) and
1x 4-pin mini DIN IN/OUT.
FREI AVK 192 - 5-pin DIN Plug - 5 pin DIN Plug, 5.0 m
12.12 EUR
Audio / Video Cable5-pin DIN connector
to 5 pin DIN connector.
Length: 5m
FREI AVK 123 - 5-pin DIN plug to 5-pin DIN connector
11.81 EUR
Audio/Video-Kabel5-pin DIN plug
to 5-pin
DIN connector
Length: approx. 2.0m
FREI AVK 121 - 5-pin DIN plug to 5-pin DIN plug, 2.0 m
11.66 EUR
Audio/Video-Kabel5-pin DIN plug to 5-pin DIN plug.
Length: 2.0m
FREI AVK 124 - 5-pin DIN plug to 5-pin DIN connector
12.28 EUR
Audio/Video-Kabel5-pin DIN plug
to 5-pin
DIN connector
Length: 5 m
FREI KRAD LZ40 - Motorcycle - charging / measuring clamp, 40 A, red
12.53 EUR
Red charging and measuring clamp 40 A with sheet steel frame and full insulation.It offers a flat receptacle connection with 6.3 mm or the solder connection.
• compact design
• full insulation
• wide opening range (also for car batteries)
dimensions
• length: 80 mm
• connection: 6.3 mm flat plug sleeve or solder connection
• clamping range: 25 mm
FREI AVK 120 - 5-pin DIN plug to 5-pin DIN plug, 1.5 m
11.35 EUR
Audio/Video-Kabel5-pin DIN plug
to 5-pin
DIN plug.
Length: 1.5m
FREI AVK 119Q-15 - 3.5 mm stereo plug to plug/1.5 m
10.78 EUR
Audio-video cable with 2x 3.5 mm stereo jack plugs• Round cable with improved shielding, 28 wires
• 100% copper
• Length: 1.5m
FREI AVK 114 - 2x RCA plug to 1x 5-pin DIN plug
10.97 EUR
Audio/video cable2x RCA plug
to 1x 5-pin
DIN plug.
Length: 1.5m
FREI D-SUB ST 15 - D-SUB plug, 15-pin, solder bucket
10.17 EUR
15-pin D subminiature plugIn solder-bucket design with
gold flashed contacts.
FREI AVK 112 - 5-pin DIN plug to 6.3-mm jack connector, stereo
11.5 EUR
Audio/video cable5-pin DIN plug
to 6.3-mm jack
connector, stereo
Length: 0.2m
FREI STECKBOARD JSBWS - Flexible jumpers, 15 cm, plug/socket, white
14.55 EUR
High-quality, flexible jumpersContents: 10 pcs in practical plastic bag
Design: Plug/socket
Colour: white
Length: 15 cm
The jumpers STRIPBOARD JBB - JSB and JSS are intermateable
FREI STECKBOARD JSBGR - Flexible jumpers, 15 cm, plug/socket, grey
14.91 EUR
High-quality, flexible jumpersContents: 10 pcs in practical plastic bag
Design: Plug/socket
Colour: grey
Length: 15 cm
The jumpers STRIPBOARD JBB - JSB and JSS are intermateable
FREI STECKBOARD JSBRT - Flexible jumpers, 15 cm, plug/socket, red
14.76 EUR
High-quality, flexible jumpersContents: 10 pcs in practical plastic bag
Design: Plug/socket
Colour: red
Length: 15 cm
The jumpers STRIPBOARD JBB - JSB and JSS are intermateable
FREI STECKBOARD JSBSW - Flexible jumpers, 15 cm, plug/socket, black
14.91 EUR
High-quality, flexible jumpersContents: 10 pcs in practical plastic bag
Design: Plug/socket
Colour: black
Length: 15 cm
The jumpers STRIPBOARD JBB - JSB and JSS are intermateable
FREI STECKBOARD JSBBL - Flexible jumpers, 15 cm, plug/socket, blue
14.55 EUR
High-quality, flexible jumpersContents: 10 pcs in practical plastic bag
Design: Plug/socket
Colour: blue
Length: 15 cm
The jumpers STRIPBOARD JBB - JSB and JSS are intermateable