JOY-IT DEBO EEPROM 32KB - Developer boards - 32 KB EEPROM module, I2C
13.04 EUR
Access the complete sheet with information, compare prices and discover the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the sale is managed by SELLER NAME and the production is done by MANUFACTURER NAME.
This EEPROM memory allows you to store and read data externally via the I2C interface of your microcontroller.
The last three digits of the I2C address can be set via jumpers on the board, which makes it possible to use several modules at the same time.
Via an additional jumper the write protection of the module can be activated, whereby the data can only be read.
Specifications
• Supply voltage: 1,8 ... 5,5 V
• Model AT24C256
• logic level: VCC
• Interface: I2C (@1010XXX, 0x50 - 0x57)
• Memory size: 32 KB
• clock frequency: up to 1 MHz
• write cycles: up to 1.000.000
• exchangeable memory chip
EAN: 4250236822884
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
This EEPROM memory allows you to store and read data externally via the I2C interface of your microcontroller.
The last three digits of the I2C address can be set via jumpers on the board, which makes it possible to use several modules at the same time.
Via an additional jumper the write protection of the module can be activated, whereby the data can only be read.
Specifications
• Supply voltage: 1,8 ... 5,5 V
• Model AT24C256
• logic level: VCC
• Interface: I2C (@1010XXX, 0x50 - 0x57)
• Memory size: 32 KB
• clock frequency: up to 1 MHz
• write cycles: up to 1.000.000
• exchangeable memory chip
EAN: 4250236822884
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
JOY-IT DEBO POE ADAPT 2 - Developer Boards - POE USB-C Power Adapter
23.59 EUR
With this adapter you can power your Raspberry Pi and other single board computers, which are powered by a USB-C port, via POE LAN.The adapter is connected directly to a POE-capable router/switch or POE injector with a POE LAN cable (up to 100 meters cable length).
This allows you to use the Raspberry very flexibly and no power outlet and power supply is required.
- Connections: 1x USB-C plug, 1x RJ45 jack, 1 x RJ45 plug
- Input voltage: 36 - 57 V (standard PoE voltage 48 V, 52 V)
- Output voltage: DC 5 V
- Output current: 2 A
- Transmission distance: 10 - 100 m
- PoE Protocol: IEEE802.3af
- Network bandwidth: 10/100 Mbps
- Operating temperature: -50 to +75°C
- Dimensions: 82 x 28 x 23 mm
ADAFRUIT DEBO RTC UHR2 - Developer Boards - Precision Real-Time Clock, DS3231
32.28 EUR
Precision Real-Time Clock DS3231
supply voltage: 3.3 V- Dimensions: 23 x 17.6 x 7.2 mm
FREI DEBO I2C-MULTI2 - Developer boards - Board I2C multiplexer, TCA9548A
12.84 EUR
On this small board up to 8 devices can be connected to a microcontroller via the I2C interfaces.- Selectable I2C address: 0x70 to 0x77
- Dimensions: 32 x 22 x 3 mm
WAVESHARE DEBO EPA 2.9 - Developer boards - 2.9'' E Ink display, black/white
25.97 EUR
This is an E-Ink display module with integrated controller and communication via SPI interface. Due to the advantages such as extremely low power consumption, wide viewing angle, great effect in sunlight, it is an ideal choice for many different applications.Special features
no backlight, displays the last content for a long time even after switching off
ultra-low power consumption, basically power is only required for refreshing
SPI interface, to connect to other controller boards such as Raspberry / Arduino / Nucleo etc.
comes with development resources and manual (examples for Raspberry Pi / Arduino / STM32)
Technical data
• Operating voltage: 3.3V
• Interface: 3-wire SPI, 4-wire SPI
• Outline dimensions: 89.5 × 38 mm
• Display size: 66.89 × 29.05 mm
• Dot pitch: 0.226 × 0.227
• Resolution: 296 × 128
• Display color: black, white
• Grayscale: 4
• Power reserve: 26.4 mV (typ.)
• Standby power: <0,017 mV
• Betrachtungswinkel:> 170°
Scope of delivery
• Display module
• Connection cable XH2.54 20 cm 8-pin
Documentation / Downloads
http://www.waveshare.com/wiki/2.9inch_e-Paper_Module
ADAFRUIT DEBO GPS - Developer boards - GPS breakout board, MTK3333
56.46 EUR
The Breakout is based on the MTK3333 chipset, a high-quality GPS module that can track up to 22 satellites on 66 channels, and has an excellent high-sensitivity receiver (-165 dB tracking) and a built-in antenna. It can perform up to 10 location updates per second to enable fast, high-sensitivity recording or tracking. The power consumption during navigation is very low at 20 mA, - Satellites: 22 (acquisition), 66 (search)
- Update rate: 1 to 10 Hz
- Position accuracy: 3 m
- Speed accuracy: 0.1 m
- Warm / cold start in 34 seconds
- Recording sensitivity: -145 dBm
- Detection sensitivity: -165 dBm
- Maximum speed: 515 m/s
- with jammer detection and reduction
- Dimensions: 35 x 25.5 x 6.5 mm
ADAFRUIT DEBO LED NP16 - Developer Boards - NeoPixel Ring with 16 WS2812 RGB LEDs
23.8 EUR
16 ultrabright LED Neopixels arranged in a circle.- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 44.5 mm
- inside diameter: 31.7 mm
SOLDERED DEBO INK 2 - Developer boards - Display ePaper, 2'', red/black/white
37.5 EUR
Durable ePaper screenE-paper is characterized by its high sharpness, contrast, energy efficiency and longevity, as it only consumes energy when the screen content changes.
The Inkplate 2 is an Arduino-compatible board with a 2.13-inch three-color e-paper display. It is a plug-and-play device, programmable via a USB port, and is controlled by an ESP32 microcontroller. It can also be connected to the internet via WiFi or Bluetooth. Due to its low power consumption of only 8 µA in energy-saving mode, it can run for months on a single Li-ion battery charge. It is simple enough for beginners, but also offers a variety of features and a user-friendly platform for advanced users. The Inkplate 2 has it all, packed onto a small format board.
- E-paper with support for red, black and white colors
- energy-saving screen refreshes
Technical specifications
- max. screen size: 2.13'' (5.41 cm)
- Screen resolution: 212 x 104 px
- Screen colors: red, black, white
- Pixel density: 111 dpi
- Screen refresh time: 15 s
- Microcontroller: ESP32
- Flash memory: 8 MB
- RAM: 4 MB
- easyC/Qwiic compatibility
- Power consumption (low current mode): 8 µA
- Dimensions (LxWxH): 65.3 x 35 x 9.8 mm
easyC
easyC is a robust connection system that optimizes the connection of microcontrollers, sensors and actuators using JST-SH compatible connectors (JST 4-pin). It offers solderless connections, serial connections of multiple devices (daisy-chaining), error-free design, parallel connection, universal compatibility and intermediate compatibility with Qwiic (Sparkfun connection system), simplifying prototype development. Further information on easyC can be found under ''Data sheets''.
Note
Screen flickering occurs when changing the screen content
external links
https://soldered.com/learn/add-inkplate-6-board-definition-to-arduino-ide/
https://github.com/SolderedElectronics/Inkplate-Arduino-library
https://github.com/SolderedElectronics/Soldered-Inkplate-2-hardware-design
https://github.com/SolderedElectronics/Inkplate-micropython
https://inkplate.readthedocs.io/en/latest/
https://inkplate.readthedocs.io/en/latest/get-started.html
ADAFRUIT DEBO LED PIXIE - Developer boards - Pixie, linkable Smart LED Pixel, FD-3RGB-Y2
29.38 EUR
linkable smart LEDs- small and user friendly
- Power: 3 W
- Dimensions: 24.1 x 19.7 x 8.2 mm
ADAFRUIT DEBO LED NP24 - Developer Boards - NeoPixel Ring with 24 WS2812 RGB LEDs
27.78 EUR
24 ultrabright LED Neopixels arranged in a circle.- 24 individually addressable RGBs
- with integrated drivers
- constant current: 18 mA
- voltage range: 4 - 7 V
- outside diameter: 65.6 mm
- inside diameter: 52.3 mm
ADAFRUIT DEBO I2C-MULTI - Developer boards - I2C multiplexer board, TCA9548A
20.18 EUR
Up to 8 devices can be connected to a microcontroller via the I2C interfaces on this small board.- selectable I2C address: 0x70 to 0x77
- Dimensions: 30.6 x 17.6 x 2.7 mm
SOLDERED DEBO 3.5 JACK - Developer boards - 3.5 mm jack socket, stereo
11.35 EUR
This product allows users to utilize all pins of a male 3.5 mm connector with four pins via an easily accessible header. It is optimized for use with Arduino (or a compatible board such as Dasduino).- Allows access to all four pins of the 3.5 mm connector
- Compatible with Arduino (or a compatible board such as Dasduino)
- Easy handling due to user-friendly design
- Ideal solution for audio applications
- Robust construction for long-term use
The product is an efficient solution for handling audio components in conjunction with Arduino (or a compatible board such as Dasduino). The connection is made via a header that provides direct access to all four pins of the 3.5 mm connector. This configuration is particularly advantageous for developers working in audio technology who require a precise and uncomplicated connection. The robust design ensures the longevity and reliability of the product.
Technical data
- Dimensions: 22 mm x 22 mm
- Board connection: 3.5 mm female, accepts 3.5 mm male
- Connections: Ground, right speaker, left speaker, microphone
- Mounting holes: 2
In summary, this product offers an indispensable function for anyone involved in the development of audio projects. It greatly simplifies the connection process and increases flexibility when working with audiovisual media.
External links
https://github.com/SolderedElectronics/3.5mm-Jack-breakout-hardware-design
JOY-IT DEBO SD-NAND 512 - Developer boards - 512 MB SD-NAND flash memory
23.28 EUR
This flash memory module allows you to store and read data externally via the SPI interface of your microcontroller.The module is controlled exactly like a conventional SD card and is therefore particularly simple. The module can be operated with 3.3 V as well as 5 V thanks to the integrated voltage converter.
Specifications
• Operating voltage: 3 ... 5 V
• logic level: VCC
• Interface: SPI
• memory size: 512 MB
• clock frequency: up to 50 MHz
ADAFRUIT DEBO LED NP12 - Developer Boards - NeoPixel Ring with 12 WS2812
20.13 EUR
12 ultrabright LED Neopixels arranged in a circle.- 16 individually addressable RGBs
- voltage range: 4 - 7 V
- outside diameter: 36.8 mm
- inside diameter: 23.3 mm
WAVESHARE DEBO EPA 2.7 - Developer boards - 2.7'' E Ink display, black/white
29.43 EUR
This is an E Ink display HAT for Raspberry Pi with integrated controller and communication via SPI interface. Benefits including extremely low power consumption, wide viewing angle and high effectiveness in sunlight make it an ideal choice for many different applications.Features
- No background illumination, displays last content for a long time after switch-off
- Ultra-low power consumption, power is basically only needed to refresh
- 4 buttons on board
- Compatible with Raspberry Pi 2B/3B/Zero/Zero W/WH
- SPI interface for connecting to other controller boards such as Raspberry/Arduino/Nucleo etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Technical data
- Operating voltage: 3.3 V
- Interface: 3-wire SPI, 4-wire SPI
- Dimensions: 85 mm x 56 mm
- Display size: 57.288 mm x 38.192 mm
- Dot pitch: 0.217 x 0.217
- Resolution: 264 x 176
- Display colour: black, white
- Grey level: 2 full
- Update time: 6 s
- Energy reserve: 24 mW (typical)
- Standby power: <0.017 mW
- Viewing angle: >170°
Included in delivery
- Display HAT
- 2 screws
Documentation/downloads
https://www.waveshare.com/wiki/2.7inch_e-Paper_HAT
JOY-IT DEBO PIR MOTION - Developer Boards - PIR Motion Sensor, BIS0001
16 EUR
Sensor PIR Motion SensorThe sensor on this module is a pyroelectric infrared sensor that detects movement in the detection area of the Fresnel lens and then outputs a ''HIGH'' signal at the sensor output pin ''SIG'' for 3 seconds. Afterwards the signal changes back to the ''LOW'' state. The soldered potentiometer is used for continuous range adjustment. With the help of this module and a microcontroller such as Raspberry Pi or Arduino, it can be used for safety systems or automation, for example.
• Supply voltage: 3 ... 5 V
• Module interface: 4 pins
• Module Detector Chip: BIS0001
• Detection angle: 120
• Detection range: 3 meters (max. 6 meters)
• infinitely variable detection range via potentiometer
• compatible with Raspberry Pi, Arduino, other SBC
• Dimensions (LxWxH): 21 x 40 x 19 mm
FREI DEBO 6PIN 10PIN - Developer boards - 6 pin to 10 pin adapter
11.5 EUR
10 Pin to 6 Pin Adapter AVRISP/USBASP/STK500Convert ATME ISP standard 10PIN to standard 6PIN interface.
It facilitates you to program MinSys, Arduino UNO R3, Arduino Mega2560 and so on.
WAVESHARE DEBO SOLAR 5W - Developer boards - solar panel, 5 W.
25.4 EUR
Solar panel, 6 V / 5 W, with 3.5 x 1.35 mm hollow plug• Solar cell type: 156 monocrystalline cell
• Surface: tempered glass
• Frame material: aluminium alloy with anodic oxidation
• Back panel material: 0.25 mm PET
• Power: 5.0 W ± 5%.
• Operating voltage: 6.0 V ± 5%.
• Operating current: 833 mA ± 5%.
• Open circuit voltage: 7.2 V ± 5%.
• Short circuit current: 916 mA ± 5%.
• Connection: Hollow plug 3.5 x 1.35 mm (+ inside / - outside)
• Dimensions (LxWxH): 230 x 195 x 16.5 mm
RASPBERRY PI RPI KEYBRD DE BG - Developer boards - Keyboard, DE, black/grey
26.95 EUR
Made specifically for the Raspberry Pi, this keyboard offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
• 79-key keyboard (78-key US keyboard)
• 3x USB 2.0 Type-A ports for powering other peripherals
• automatic keyboard language detection
• USB Type-A to MicroUSB Type-B cable for connection
• compatible with all Raspberry Pi products
• compatible with Windows / MacOS / Linux
• ergonomic design for comfortable use
• available in the colors red/white or black/grey
• available with the layouts DE, UK, US, FR, ES or IT
• CE and FCC compliant
RASPBERRY PI RPI KEYBRD UK RW - Developer boards - Keyboard, UK, red/white
32.59 EUR
This specially designed keyboard for the Raspberry Pi offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
- 79-key keyboard (78-key US keyboard)
- 3x USB 2.0 Type A ports for powering other peripherals
- automatic recognition of the keyboard language
- USB Type-A to MicroUSB Type-B cable for connection
- compatible with all Raspberry Pi products
- ergonomic design for comfortable use
- available in the colours red/white or black/grey
- available with the layouts DE, UK, US, FR, ES or IT
- CE and FCC compliant
RASPBERRY PI RPI MOUSE BK - Developer boards - Mouse, black/grey
17.65 EUR
This mouse, specially designed for the Raspberry Pi, offers an ergonomic design in black/grey.Specification
- optical three-button mouse
- scroll wheel
- USB Type A connector
- compatible with all Raspberry Pi products
- ergonomic design for comfortable use
- available in the colours red/white or black/grey
SOLDERED DEBO EASYC 20CM - Developer boards - EasyC cable, 20cm
11.09 EUR
The easyC system enables easy connection of microcontroller boards, sensors and actuators for fast prototyping without errors. The modules are connected via simple, prefabricated cables. easyC modules have suitable connections for these cables and are based on I2C communication.- easyC compatible cable
- easyC connections at both ends
- cable length: 20 cm
- simple and error-free connection
- suitable for Arduino (or a compatible board such as Dasduino)
The easyC compatible cable is specially designed for easy integration into the easyC system. It has easyC connectors at both ends and a cable length of 20 cm, which allows flexible handling and installation. The modules' prefabricated cables and socket connectors ensure a reliable and secure connection. The I2C-based communication allows efficient and error-free data transmission between the connected components. This cable is particularly suitable for use with Arduino (or a compatible board such as Dasduino), which extends the versatility and range of applications of the easyC system.
In summary, the easyC compatible cable provides a reliable and efficient solution for connecting microcontroller boards, sensors and actuators in the easyC system, supported by I2C communication.
SOLDERED DEBO EASYC 50CM - Developer boards - EasyC cable, 50cm
11.35 EUR
The easyC system enables easy connection of microcontroller boards, sensors and actuators for fast prototyping without errors. The modules are connected via simple, prefabricated cables. easyC modules have suitable connections for these cables and are based on I2C communication.- easyC compatible cable
- easyC connections at both ends
- Cable length: 50 cm
- simple and error-free connection
- suitable for Arduino (or a compatible board such as Dasduino)
The easyC compatible cable is specially designed for easy integration into the easyC system. It has easyC connectors at both ends and a cable length of 50 cm, which allows flexible handling and installation. The modules' prefabricated cables and socket connectors ensure a reliable and secure connection. The I2C-based communication allows efficient and error-free data transmission between the connected components. This cable is particularly suitable for use with Arduino (or a compatible board such as Dasduino), which extends the versatility and range of applications of the easyC system.
In summary, the easyC compatible cable provides a reliable and efficient solution for connecting microcontroller boards, sensors and actuators in the easyC system, supported by I2C communication.
WAVESHARE DEBO EPA 7.5 RD - Developer boards - Display ePaper, 7,5'', black/white/red
86.85 EUR
This is an E-Ink HD 7.5'' (19.05 cm) display HAT for Raspberry Pi with a resolution of 800 x 480 pixels.Due to the advantages such as extremely low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf labels, industrial instruments and so on.
Features
• no backlight, display the last content for a long time even when power off.
• very low power consumption, basically the power is only needed for updating.
• compatible with Raspberry Pi 2B/3B(+)/Zero/Zero W
• Preserved solder pads for SPI interface, to connect with other controller boards like Arduino/Nucleo, etc.
• comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Specifications
• operating voltage: 3.3 V
• Interface: SPI
• dimensions (LxW): 170.2 × 111.2 mm × 1.25 mm
• display size (LxW): 163.2 × 97.92 mm
• dot pitch: 0.205 × 0.204
• resolution: 800 x 480
• display color: black, white, red
• grayscale: 2
• full refresh time: 16 s
• refresh power: 48 mV (typ.)
• standby power: <0,017 mW
• Betrachtungswinkel: >170°.
Scope of delivery
• 7.5'' HD e-Paper
• ePaper Driver HAT
• spacer bolts, screws and nuts
Delivery without developer board
https://www.waveshare.com/7.5inch-e-paper-hat-b.htm
SOLDERED DEBO EASYC 10CM - Developer boards - EasyC cable, 10cm
10.83 EUR
The easyC system enables easy connection of microcontroller boards, sensors and actuators for fast prototyping without errors. The modules are connected via simple, prefabricated cables. easyC modules have suitable connections for these cables and are based on I2C communication.- easyC compatible cable
- easyC connections at both ends
- cable length: 10 cm
- simple and error-free connection
- suitable for Arduino (or a compatible board such as Dasduino)
The easyC compatible cable is specially designed for easy integration into the easyC system. It has easyC connectors at both ends and a cable length of 10 cm, which allows flexible handling and installation. The modules' prefabricated cables and socket connectors ensure a reliable and secure connection. The I2C-based communication allows efficient and error-free data transmission between the connected components. This cable is particularly suitable for use with Arduino (or a compatible board such as Dasduino), which extends the versatility and range of applications of the easyC system.
In summary, the easyC compatible cable provides a reliable and efficient solution for connecting microcontroller boards, sensors and actuators in the easyC system, supported by I2C communication.
WAVESHARE DEBO EPA 1.54 - Developer boards - 1.54'' E Ink display, black/white
29.38 EUR
This is an E Ink display module with integrated controller and communication via SPI interface. Benefits including extremely low power consumption, wide viewing angle and high effectiveness in sunlight make it an ideal choice for many different applications.Features
- No background illumination, displays last content for a long time after switch-off
- Ultra-low power consumption, power is basically only needed to refresh
- SPI interface for connecting to other controller boards such as Raspberry/Arduino/Nucleo etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Technical data
- Operating voltage: 3.3 V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimensions: 48 mm x 33 mm
- Display size: 27.6 mm x 27.6 mm
- Dot pitch: 0.138 x 0.138
- Resolution: 200 x 200
- Display colour: black, white
- Grey level: 2
- Partial update time: 0.3 s
- Full update time: 2 s
- Energy reserve: 26.4 mW (typical)
- Standby power: <0.017 mW
- Viewing angle: >170°
Included in delivery
- Display module
- 20-cm, 8-pin connecting cable XH2.54
Documentation/downloads
http://www.waveshare.com/wiki/1.54inch_e-Paper_Module
RASPBERRY PI RPI KEYBRD IT BG - Developer Boards - Keyboard, IT, black/grey
30.11 EUR
Made specifically for the Raspberry Pi, this keyboard offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layouts.Specification
• 79-key keyboard (78-key US keyboard)
• 3x USB 2.0 Type-A ports for powering other peripherals
• automatic keyboard language detection
• USB Type-A to MicroUSB Type-B cable for connection
• compatible with all Raspberry Pi products
• compatible with Windows / MacOS / Linux
• ergonomic design for comfortable use
• available in the colors red/white or black/grey
• available with the layouts DE, UK, US, FR, ES or IT
• CE and FCC compliant
FREI DEBO GESTURE 9X - Developer boards - gesture recognition 9-fold, PAJ7620U2
18.43 EUR
This board contains the gesture recognition sensor PAJ7620U2, which can be accessed via I2C.It can recognize 9 different gestures: Up, down, left, right, forward, backward, circle clockwise and counterclockwise, and waving. The PAJ7620U2 can also be used to detect approaching and distant objects.
Features
• Operating voltage: 1.8 ... 3,3 V
• Operating temperature: -40 ... +85 °C
• Recognition of 9 gestures
• Gesture speed Normal mode: 60°/s to 600°/s
• Gesture speed Gaming Mode: 60°/s to 1200°/s
• Immunity to ambient light: < 100k Lux
• built-in proximity detection
• flexible energy saving scheme
• I2C interface up to 400 kbit/s, pull-up voltage from 1.8V to 3.3V
• Ambient light noise reduction
• Dimensions (LxWxH): 14 x 14 x 5 mm
WAVESHARE DEBO EPA 2.1 RD - Developer boards - Display ePaper, 2,1'', black/white/red
30.21 EUR
This is an E-Ink 2.13'' (5.41 cm) display HAT for Raspberry Pi with a resolution of 212 x104 pixels.Due to the advantages such as extremely low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf labels, industrial instruments and so on.
Features
• no backlight, display the last content for a long time even when power off.
• very low power consumption, basically the power is only needed for updating.
• compatible with Raspberry Pi 2B/3B(+)/Zero/Zero W
• Preserved solder pads for SPI interface, to connect with other controller boards like Arduino/Nucleo, etc.
• comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Specifications
• operating voltage: 3.3 V
• Interface: SPI
• dimensions (LxW): 65 × 30.2 mm
• display size (LxW): 23.71 × 48.55 mm
• dot pitch: 0.194 × 0.194 × 0.194
• resolution: 212 × 104
• display color: black, white, red
• grayscale: 2
• full refresh time: 15 s
• update power: 26.4 mV (typ.)
• standby power: <0,017 mV
• Betrachtungswinkel: >170°.
Scope of delivery
• 2.13'' e-Paper HAT
• spacer bolts, screws and nuts
• 9-pin SMD header with 2.54 mm pitch
delivery without developer board
https://www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)
FREI DEBO RELAY 8WAY - Developer boards - 8-way solid state relay, 5V, 240V/2A
30.57 EUR
8-channel solid state relay with fuse and built-in damping circuitTechnical features
- Relay type: Omron 1565E G3MB-202P
- Output voltage 100 - 240 V AC
- switching thresholds: 0 - 2.5 V =OFF / 3 - 5 V = ON
- with zero crossing
- Isolation by phototriak
Connections
- DC+:Power supply ( 5 V DC)
- DC-: Ground connection
- IN1 ... IN8: Signal output, active at high level
JOY-IT DEBO FAN 303010 - Developer boards - fan, 30 x 30 x 10 mm
13.46 EUR
This 30 x 30 mm fan with Dupont socket connection can be used for single board computers such as the Raspberry Pi.Technical data
- Connection: 10 cm cable with 2x1 Dupont socket connection
- Voltage: 5 V
- Current: 7 mA
- Revolutions: 7,516 RPM
- Dimensions (LxWxH): 30 x 30 x 10 mm
JOY-IT DEBO CAN-485 - Raspberry Pi Pico - Expansion board with CAN + RS485
26.28 EUR
This expansion board allows you to add an RS485 and a CAN interface to a Raspberry Pi Pico. The board can be operated either via a standard USB-C connection with 5 V or via a screw terminal that accepts an input voltage of 6 to 12 V.
The voltage applied to the screw terminal is reduced to 5 V by an integrated voltage converter.
Specifications
• Interface CAN: SPI, CAN
• Interface RS485: Serial RS485
• Supply voltage: USB-C 5 V DC / screw terminal 6-12 V DC
• Logic level 3.3 V
• Terminating resistor CAN: 120 Ohm (can be deactivated if required)
• Terminating resistor RS485: 120 Ohm (can be deactivated if required)
Note:The USB-C connection does not transmit any data to the Raspberry Pi Pico
FREI DEBO TOUCH SENS2 - Developer boards - Board for capacitive touch sensors, MPR121
12.53 EUR
The MPR121 is a capacitive touch sensor controller that is controlled via I2C interface. Conductive surfaces can be used as capacitive touchpads and controlled via the module. The chip can control up to twelve separate electrodes, plus a simulated thirteenth electrode. The MPR121 also has 8 LED driver pins. If these pins are not configured as electrodes, they can be used to drive LEDs.Features
• Operating voltage:1.71 ... 3.6 V DC
• Operating temperature: -40 ... +85 °C
• Dimensions (LxW): 31 x 20 mm
2 matching pin headers included in the scope of delivery
FREI DEBO 2WD SPEED - Developer Boards - Speed/Distance Measurement Module
12.43 EUR
Geschwindigkeitsmessung für Zweirradantriebe aus einem Modul mit zwei Gabellichtschranken.Unterbrechungen zum Beispiel durch Spalte in den Felgen können als Unterbrechnung des Signals erkannt und ausgewertet werden. Integrierte Schmitt-Trigger sorgen für ein stabiles Signal!
Technische Daten
- Versorgung über 5 V DC
- Ausgang 5 V TTL
- Schmitt-Trigger
Anschlussbelegung
- 1 - Spannungsversorgung
- 2 - Masse
- 3 - Ausgang 1
- 4 - Ausgang 2
FREI DEBO LVL KA2284 - Developer boards - Voltage level indicator, KA2284
11.86 EUR
Batteriestandsanzeige mit fünf LED-Leuchten, die mit steigender Spannung nach und nach aufleuchten.Der AC- und DC-Eingang dieses Moduls kann durch einen Jumper ausgewählt werden und er kann Spannungen von 3,5 V bis 12 V verarbeiten.
• Chip: KA2284
• Versorgungsspannung: 3,5 V - 12 V
• Einstellbarer Leistungspegelbereich
• AC/DC - Eingang wird durch einen Jumper geregelt
• Maße PCB: 29 x21 mm
FREI DEBO RELAIS 16CH - Developer boards - relay module, 16-channel, 12 V
29.07 EUR
With this 16-channel relay module, large loads can be easily controlled/switched with 5 V from a microcontroller, e.g. Raspberry Pi, Arduino.... can be controlled / switched. All connections are accessible via screw terminals and can therefore be easily connected to a Raspberry Pi or other board using Dupont cables, for example. The definable switching level can be used to switch with either a high or a low level.Features
- 12 V interface card with 16 relays
- Driver current only 15 - 20 mA
- Switching capacity 250 V AC / 10 A or 30 V DC / 10 A
- Standard interface
- Indicator LEDs for each channel
- Dimensions: 120 x 90 x 20 mm
SOLDERED DEBO ESP CONNECT - Developer boards - ESP8266 / ESP32 Connect
14.5 EUR
The CONNECT programmer is designed to enable extremely simple programming of boards based on ESP8266 and ESP32 microcontrollers. It contains all the necessary electronics and logic so that programming can be done by connecting a USB cable to the CONNECT programmer and connecting the CONNECT programmer to the programming header. The electronics responsible for the timing and signal sequence are also located on the board so that the ESP microcontroller is put into bootloader mode.
The ESP programming header can be found on boards from Soldered that are based on ESP8266 or ESP32 microcontrollers and do not have a USB-UART converter. However, this programmer can also be used for any other ESP32/ESP8266 board.
Technical data
- IC: CH340
- Pin layout: GPIO0, RESET, RX, TX, 3V3, GND
- LEDs: RX, TX, Power
- USB: USB-C
- Dimensions: 38 x 22 mm
external links
https://github.com/SolderedElectronics/CONNECT-programmer-hardware-design
RASPBERRY PI RPI KEYBRD FR BG - Developer Boards - Keyboard, FR, black/grey
24.94 EUR
Made specifically for the Raspberry Pi, this keyboard offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
• 79-key keyboard (78-key US keyboard)
• 3x USB 2.0 Type-A ports for powering other peripherals
• automatic keyboard language detection
• USB Type-A to MicroUSB Type-B cable for connection
• compatible with all Raspberry Pi products
• compatible with Windows / MacOS / Linux
• ergonomic design for comfortable use
• available in the colors red/white or black/grey
• available with the layouts DE, UK, US, FR, ES or IT
• CE and FCC compliant
RASPBERRY PI RPI KEYBRD IT RW - Developer boards - keyboard, IT, red/white
27.94 EUR
This specially designed keyboard for the Raspberry Pi offers an ergonomic design in red/white or black/grey and is available with DE, UK, US, FR, ES or IT layout.Specification
- 79-key keyboard (78-key US keyboard)
- 3x USB 2.0 Type A ports for powering other peripherals
- automatic recognition of the keyboard language
- USB Type-A to MicroUSB Type-B cable for connection
- compatible with all Raspberry Pi products
- ergonomic design for comfortable use
- available in the colours red/white or black/grey
- available with the layouts DE, UK, US, FR, ES or IT
- CE and FCC compliant
FREI DEBO2 SEN STROM - Developer boards - current sensor up to 5 A, ACS712ELC-05B
13.26 EUR
Das Gerät besteht aus einer präzisen, linearen Hall-Sensor-Schaltung mit geringem Offset.Der durch fließende Strom erzeugt ein Magnetfeld, das vom integrierten Hall-IC C erfasst und in eine proportionale Spannung umgewandelt wird.
Die Genauigkeit des Geräts wird durch die Nähe des magnetischen Signals zum Hall-Wandler optimiert.
Technische Daten
• Versorgungsspannung: 5 V
• Chipsatz: ACS712ELC-05B
• Ausgangssignal: 185 mV/A
• mit Schraubklemme