FREI D1Z RTC - D1 Shield - Real-Time Clock, DS1307

14.34 EUR
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; falls into the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
With this RTC-Shield the D1- Mini can be extended by real time clock.
• DS1307 chipset
• optional: CR1220 backup battery
Pinout
• 5 V: 5 V power supply
• D1: SCL
• D2: SDA
• GND: Ground
Note:Delivery includes 6 pin headers (2x 8 pin male - male, male - female, male long pin - female each).
CR1220 button cell not included!
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
With this RTC-Shield the D1- Mini can be extended by real time clock.
• DS1307 chipset
• optional: CR1220 backup battery
Pinout
• 5 V: 5 V power supply
• D1: SCL
• D2: SDA
• GND: Ground
Note:Delivery includes 6 pin headers (2x 8 pin male - male, male - female, male long pin - female each).
CR1220 button cell not included!
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

supply voltage: 3.3 V- Dimensions: 23 x 17.6 x 7.2 mm

Pinout
bulletpoint# 3.3 V: 3.3 V power supply
bulletpoint# D8: SS (CS Chip Select)
• D7: MOSI
• D6: MISO
bulletpoint# D5: CLK
• GND: Ground
Note:Delivery includes 2 pin headers (2x 8 Pin Male - Male)

Enclosure: TSOC-6
Manufacturer: Dallas

• Digital
• Measuring range: -55 - +125°C
• Enclosure: SO-8
Manufacturer: Dallas

Description:
The DS1307 serial RTC is a low-power, full BCD clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. A built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.
Features
• Completely Manages All Timekeeping Functions
o Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100
o 56-Byte, Battery-Backed, General-Purpose RAM with Unlimited Writes
o Programmable Square-Wave Output Signal
• Simple Serial Port Interfaces to Most Microcontrollers
o I2C Serial Interface
• Low Power Operation Extends Battery Backup Run Time
o Consumes Less than 500nA in Battery-Backup Mode with Oscillator Running
o Automatic Power-Fail Detect and Switch Circuitry
• 8-Pin DIP and 8-Pin SO Minimizes Required Space
• Underwriters Laboratories® (UL) Recognized

Description:
The DS1307 serial RTC is a low-power, full BCD clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. A built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.
Features
• Completely Manages All Timekeeping Functions
o Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100
o 56-Byte, Battery-Backed, General-Purpose RAM with Unlimited Writes
o Programmable Square-Wave Output Signal
• Simple Serial Port Interfaces to Most Microcontrollers
o I2C Serial Interface
• Low Power Operation Extends Battery Backup Run Time
o Consumes Less than 500nA in Battery-Backup Mode with Oscillator Running
o Automatic Power-Fail Detect and Switch Circuitry
• 8-Pin DIP and 8-Pin SO Minimizes Required Space
• Underwriters Laboratories® (UL) Recognized



Die serielle Echtzeit-Weckeruhr DS1305 bietet einen vollständigen binär kodierten Dezimalkalender (BCD), auf den über eine einfache serielle Schnittstelle zugegriffen wird. Die Uhr/der Kalender zeigt Sekunden, Minuten, Stunden, Tag, Datum, Monat und Jahr an. Das Datum des Monatsendes wird automatisch für Monate mit weniger als 31 Tagen angepasst, einschließlich Korrekturen für Schaltjahre. Die Uhr arbeitet entweder im 24-Stunden- oder 12-Stunden-Format mit AM/PM-Anzeige. Zusätzlich stehen 96 Byte NV-RAM für die Datenspeicherung zur Verfügung. Das DS1305 behält die Uhrzeit und das Datum bei, sofern der Oszillator aktiviert ist, solange mindestens eine Versorgung einen gültigen Pegel aufweist.
Wesentliche Merkmale
- Echtzeituhr (RTC) zählt Sekunden, Minuten, Stunden, Datum des Monats, Monat, Wochentag und Jahr mit Schaltjahrkompensation, gültig bis 2100
- 96-Byte, batteriegepuffertes NV-RAM zur Datenspeicherung
- Zwei Tageszeitalarme, programmierbar auf Kombination von Sekunden, Minuten, Stunden und Wochentag
- Mehrere Stromversorgungspins erleichtern das Hinzufügen einer Batterie für die Datensicherung

Housing: DIP-8
Manufacturer: Dallas

- Provides year, month, day, weekday, hours, minutes and seconds based on a 32.768-kHz quartz crystal
- Register: seconds to years
- Clock operating voltage: 1.0 V to 5.5 V
- Low backup current: typically 150 nA at VDD = 3.0 V and Tamb = 25°C
- 2-line bidirectional 1-MHz Fast-mode Plus (FM+) I²C interface, read D1h, write D0h2
- Battery backup input pin and switch-over circuit
- Freely programmable timer and alarm with interrupt capability
- Selectable integrated oscillator load capacitors for CL = 7 pF or CL = 12.5 pF
- Oscillator stop detection function
- Internal Power-On Reset (POR)
- Open drain interrupt or clock output pins
- Programmable offset register for frequency adjustment


• Timepiece
Enclosure: DIP-8

• I2C interface
• I2C address definable via jumper (0x3C or 0x3D)
• Supply voltage: 3.3 V
• Display size: 0.66''
• Resolution: 64x48 pixels
Pin assignment
• 3.3 V: 3.3 V Power supply
• D1: SCL
• D2: SDA
• GND: Ground
Useful links
https://docs.wemos.cc/en/latest/d1_mini_shiled/oled_0_66.html
NoteDelivery incl. pin strips

Ceramic housing, 3.2 x 5 x 1.2 mm
Rated frequency: 32.768 kHz
Supply voltage: 1.2 ~ 5.5 V
Frequency tolerance: +-20 ppm
Operating temperature: -40 ~ +85°C
I²C bus interface (2-wire serial interface)

Ceramic housing, 3.2 x 5 x 1.2 mm
Rated frequency: 32.768 kHz
Supply voltage: 1.2 ~ 5.5 V
Frequency tolerance: +-20 ppm
Operating temperature: -40 ~ +85°C
SPI bus interface


SERIAL-INTERFACE ƒn REAL-TIME CLOCK MODULE
RTC of the serial interface system incorporates a 32.768 kHz crystal oscillator. The function incorporates calendar + clock counter (year, month, day, day of the week, hour, minute + second) + time alarm, interval timer + time update interruption, among other features, back-up battery charge control function + the interface power supply input pin, RX8130CE support various power supply circuits.
Features:
- Built in frequency adjusted 32.768 kHz crystal unit.
- Interface type: I2C-Bus interface (up to 400 kHz)
- Operating voltage range: 1.6 V to 5.5 V
- Timekeeper voltage range: 1.1 to 5.5 V
- Auto power switching function: Switchover by main power supply monitor.
- Back-up battery charge control function: For rechargeable lithium batteries.
- Low leak current: A leak current from a back-up power supply pin. 5 nA (Max.)
- Reset function: At low supply voltage, external reset signal is generated.
- Low voltage detection: supply and backup detection
- Time correction: digital offset function

Overview
This module is an I2C bus interface-compliant real-time clock which includes a 32.768 kHz DTCXO. In addition to providing a calendar (year, month, date, day, hour, minute, second) function + a clock counter function, it provides an abundance of other functions including an alarm function, Wakeup timer function, time update interrupt function + 32.768 kHz output function. Thanks to the battery backup switchover function + the interface power supply input pin, RX8900 can support various power supply circuitries. C-MOS process for low current consumption, which enables long-term battery back-up.
Features:
- Features built-in 32.768 kHz DTCXO, high levels of stability.
- Supports I2C bus's high-speed mode (up to 400 kHz)
- Alarm interrupt function for day, date, hour, + minute settings
- Wakeup timer interruption
- Time update interrupt function (sec, min)
- Temperature compensated 32.768 kHz output with OE function
- Leap year auto-correction
- Interface range: 2.5 V - 5.5 V
- Time-keeping range: 1.6 V - 5.5 V
- Low current consumption: 0.70µA/3 V (Typ.)
- Built-in backup switchover circuit (trickle charge)

Overview
This module includes a 32.768 kHz DTCXO. Providing calendar (year, month, date, day, hour, minute, second) function + clock counter, alarm, fixed-cycle timer, time update interrupt, 32.768-kHz output, time stamp with EVIN-pin trigger + programmable output to the SOUT pin of the detection flag or others. The devices are manufactured using a C-MOS process for low current consumption, which enables long-term battery back-up.
Features:
- Built-in 32.768-kHz DTCXO.
- Supports I2C-bus's high-speed mode (up to 400 kHz)
- Time stamp function with EVIN-pin trigger
- Outputs to the SOUT pin of each detection flag or others.
- Alarm interrupt function for day, date, hour and minute settings
- Fixed-cycle timer interrupt function 244.14 µs to 32 years
- Time update interrupt function (seconds, minutes)
- Temperature-compensated 32.768-kHz output with OE function
- Auto correction of leap years (from 2000 to 2099)
- Wide range of interface voltages: 1.6 V to 5.5 V
- Wide range of time-keeping voltages: 1.5 V to 5.5 V
- Low current consumption: 0.35 µA/3.0 V (typical)

Overview
This module is an I2C bus interface-compliant real-time clock which includes a 32.768 kHz DTCXO. In addition to providing a calendar (year, month, date, day, hour, minute, second) function + a clock counter function, it provides an abundance of other functions including an alarm function, Wakeup timer function, time update interrupt function + 32.768 kHz output function. Thanks to the battery backup switchover function + the interface power supply input pin, RX8900 can support various power supply circuitries. C-MOS process for low current consumption, which enables long-term battery back-up.
Features:
- Features built-in 32.768 kHz DTCXO, high levels of stability.
- Supports I2C bus's high-speed mode (up to 400 kHz)
- Alarm interrupt function for day, date, hour, + minute settings
- Wakeup timer interruption
- Time update interrupt function (sec, min)
- Temperature compensated 32.768 kHz output with OE function
- Leap year auto-correction
- Interface range: 2.5 V - 5.5 V
- Time-keeping range: 1.6 V - 5.5 V
- Low current consumption: 0.70µA/3 V (Typ.)
- Built-in backup switchover circuit (trickle charge)

Note: Supplied with 6 sockets

NoteDelivery includes pin headers

• Supply voltage: 5 V
• Frequency: 1 ... 3 kHz
• signal pin must be defined before use (D5 / D6 / D7 / D8)
Pin assignment
• 5 V: 5 V supply voltage
• D5 / D6 / D7 / D8: signal pin
• GND: Ground
Note:Delivery includes 2 pin headers


We provide a Panasonic ML-2020 lithium manganese dioxide battery with a two-pin connector for connection to the battery port on the Raspberry Pi 5 board and a double-sided adhesive pad for mounting on the inside of a case or other suitable location.
Technical data
• for Raspberry Pi 5
• high accuracy
• energy efficient

Pin assignment
• D3: signal pin
• GND: Ground
Note:Delivery incl. 2 pin headers

Simply mount this RTC Shield on the GPIO port of the ODROID-C2 to get the time while your ODROID is offline. A lithium coin battery can run the RTC chip up to 5~6 years without external power supply.
Specification
- Dimensions (LxWxHx): 20 x 20 x 20 x 13.5 mm
- Coin cell: 1 x CR2032 included, exchangeable

- Integrated real-time clock (RTC via I2C, battery included)
- Signal range up to 200 m via signal amplifier (PA)
- Compatible with Zigbee Light Link (ZLL), Zigbee Home Automation (ZHA) and Zigbee 3.0
- For Raspberry Pi Zero, 1, 2B, 3B, 3B+ and 4B
- Dimensions: 30 x 18 x 10 mm