FLUKE 325 - Fluke 325 true RMS current clamp meter
354.25 EUR
Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; falls into the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Fluke's usual robustness. Fluke's usual reliability. Fluke's usual accuracy.
True RMS and optimised ergonomic design make the current clamp meters in the 320 series the most important measuring instruments for installation and troubleshooting in industrial and building applications. The current clamp meters Fluke 323, 324 and 325 are used to check circuits, switches, fuses and contacts for the presence of load current, AC voltage or continuity. These compact and robust current clamp meters are ideal for currents up to 400 A in restricted control cabinets. The Fluke 325 current clamp meter also allows DC and frequency measurement.
• AC current measurement up to 400 A
• AC and DC voltage measurement up to 600 V
• True RMS values of AC voltages and currents for accurate measurements with non-linear signals
• Resistance measurements of up to 40 kohm thanks to continual detection function
• Temperature and capacitance measurement.
• Frequency measurement
• Sleek, ergonomic design
• Safety specification in accordance with CAT IV 300 V and CAT III 600 V
• Hold Button
• Soft carrying case
Technical data:
• AC power: 40.00 A/400.0 A
2% ±5 digits (45 Hz to 65 Hz)
2.5% ±5 digits (65 Hz to 400 Hz)
• DC power: 40.00 A to 400.0 A, ±2% + 5 digits
• AC voltage: 600.0 V, 1.5% ±5 digits
• DC voltage: 600.0 V, 1.0% ±5 digits
• Resistance measurement: 400.0 ohm/4000 ohm/40.00 K ohm, 1.0% ±5 digits
• Continuity test: = 30 ohm
• Capacitance measurement: 100.0 µF to 1000 µF
• Frequency measurement: 5.0 Hz to 500.0 Hz
• Measurement (AC): True RMS measurement
• Backlight
• Hold function
• Contact measurement of temperature: -10.0°C to 400.0°C (-114.0 bis 752.0°F)
• Min. /Max.
• Max. cable diameter: 30 mm
• H x W x D (mm): 207 x 75 x 34
• Weight: 283 g
• Measurement category EN 61010-1: CAT III 600 V, CAT IV 300 V
EAN: 0095969623766
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Fluke's usual robustness. Fluke's usual reliability. Fluke's usual accuracy.
True RMS and optimised ergonomic design make the current clamp meters in the 320 series the most important measuring instruments for installation and troubleshooting in industrial and building applications. The current clamp meters Fluke 323, 324 and 325 are used to check circuits, switches, fuses and contacts for the presence of load current, AC voltage or continuity. These compact and robust current clamp meters are ideal for currents up to 400 A in restricted control cabinets. The Fluke 325 current clamp meter also allows DC and frequency measurement.
• AC current measurement up to 400 A
• AC and DC voltage measurement up to 600 V
• True RMS values of AC voltages and currents for accurate measurements with non-linear signals
• Resistance measurements of up to 40 kohm thanks to continual detection function
• Temperature and capacitance measurement.
• Frequency measurement
• Sleek, ergonomic design
• Safety specification in accordance with CAT IV 300 V and CAT III 600 V
• Hold Button
• Soft carrying case
Technical data:
• AC power: 40.00 A/400.0 A
2% ±5 digits (45 Hz to 65 Hz)
2.5% ±5 digits (65 Hz to 400 Hz)
• DC power: 40.00 A to 400.0 A, ±2% + 5 digits
• AC voltage: 600.0 V, 1.5% ±5 digits
• DC voltage: 600.0 V, 1.0% ±5 digits
• Resistance measurement: 400.0 ohm/4000 ohm/40.00 K ohm, 1.0% ±5 digits
• Continuity test: = 30 ohm
• Capacitance measurement: 100.0 µF to 1000 µF
• Frequency measurement: 5.0 Hz to 500.0 Hz
• Measurement (AC): True RMS measurement
• Backlight
• Hold function
• Contact measurement of temperature: -10.0°C to 400.0°C (-114.0 bis 752.0°F)
• Min. /Max.
• Max. cable diameter: 30 mm
• H x W x D (mm): 207 x 75 x 34
• Weight: 283 g
• Measurement category EN 61010-1: CAT III 600 V, CAT IV 300 V
EAN: 0095969623766
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
FLUKE 323 - Fluke 323 true RMS current clamp meter
211.2 EUR
Fluke's usual robustness. Fluke's usual reliability. Fluke's usual accuracy.True RMS and optimised ergonomic design make the current clamp meters in the 320 series the most important measuring instruments for installation and troubleshooting in industrial and building applications. The Fluke 323 is ideal for measuring currents up to 400 A in restricted control cabinets.
• AC current measurement up to 400 A
• AC and DC voltage measurement up to 600 V
• True RMS values of AC voltages and currents for accurate measurements with non-linear signals
• Resistance measurements of up to 40 kohm thanks to continual detection function
• Sleek, ergonomic design
• Safety specification in accordance with CAT IV 300 V and CAT III 600 V
• Hold Button
• Soft carrying case
Technical data:
• Alternating current: 400.0 A
2% ±5 digits (45 Hz to 65 Hz)
2.5% ±5 digits (65 Hz to 400 Hz)
• AC voltage: 600.0 V, 1.5% ±5 digits
• DC voltage: 600.0 V, 1.0% ±5 digits
• Resistance measurement: 400.0 ohm/4000 ohm, 1.0% ±5 digits
• Continuity test: = 70 ohm
• Measurement (AC): True RMS measurement
• Hold function
• Max. cable diameter: 30 mm
• H x W x D (mm): 207 x 75 x 34
• Weight: 265 g
• Measurement category EN 61010-1: CAT III 600 V, CAT IV 300 V
FLUKE 365 - Fluke 365 true RMS current clamp meter AC/DC
452.29 EUR
Quick and versatile measuring - easy to use.The Fluke 365 is a robust instrument and perfect for working in areas where it is difficult to access cables. The small, sleek jaws of the Fluke 365 are removable and have flexible test leads, which make access to cables and viewing of the display easier than ever.
Features:
• 200 A AC and DC current measurement with removable jaws
• AC and DC voltage measurement up to 600 V
• The removable jaws facilitate access to the cabling and the viewing of the display
• Built-in flashlight allows simple illumination and identification of cables
• Safety specification: CAT III, 600 V
• Due to the compact design, the current clamp meters fit comfortably in your hand and are easy to use when wearing protective equipment.
• Good shielding and state-the-art signal processing ensures readings remain stable even in environments with significant electromagnetic interference.
• Readings are easy to view on the large, backlit display. The most appropriate measurement range is automatically selected so that the switch position does not have to be changed while taking a measurement.
• 3-year warranty
• Soft carrying case
Technical data:
Current measurement AC/DC: 200A
Voltage measurement AC/DC: 600V
Continuity resistance: <30 ohm
Resistance measurement: 6000 ohm
Backlight
Measuring non-linear loads: True RMS
Diameter of the live conductor: maximum of 18 mm
Operating temperature: -10 to +50°C
Dimensions: 225 x 65 x 46 mm
Weight: 275 g
Safety: IEC/EN 61010-1:2001, CAT III 600 V
Included with delivery:
Laminated quick reference cards, safety information sheet, soft carrying case, TL75 test leads, magnetic strap, 2 alkaline batteries type AA
WIHA 45219 - Current clamp meter, digital, up to 1000 V AC
334.82 EUR
THE test multitool for the electricianWhen working on electrical systems that cannot be switched off, for example, current measurements are a major challenge. With the current measuring clamp from Wiha, measurements can be made using the clamp fork without interrupting the circuit. Handling is made much easier by the contactless one-hand test. The test probes enable further tests: Voltage measurements in the AC and DC range as well as resistance, frequency and capacitance measurements. They also enable continuity tests and diode tests. This multifunctionality significantly increases efficiency. The measurement results can be read immediately and beyond the measurement process by means of a large LCD display with backlight and data hold function.
An additional signal tone indicates the current flow during continuity testing. Furthermore, thanks to the integrated flashlight function, Wiha's current clamp offers optimum lighting conditions, even in poorly lit working environments. The LPF function, together with the True RMS function, increases the process reliability of your test by providing disturbance-free RMS values. According to the measurement category CAT IV up to 1,000 V, the current clamp offers maximum safety for work directly on sources of low-voltage installation.
Product advantages:
- simplifies your work: large LCD display with backlight for easy-to-read measurement results
- increases your safety: measurement of live wires without open contacts
- facilitates handling: Simple one-hand test without interrupting the circuit
- increases your efficiency: All tests relevant for electricians with only one measuring device
- Simplifies your work: An integrated flashlight function ensures optimum lighting conditions
- increases your process reliability: Accurate measurement results thanks to LPF and TRUE RMS measurement
Scope of delivery incl. 2x AAA batteries
FLUKE 116/323 - FLUKE combo kit: multimeter + current clamp meter
529.03 EUR
The new combo kit consisting of multimeter and clamp meter for HVAC engineers is a very attractive all-in-one solution for efficient troubleshooting and repair. It contains all the accessories that HVAC engineers need all in a compact hard case.This kit is intended to help air conditioning engineers in their troubleshooting and offers high savings in comparison to the respective individual prices.
Fluke 116 digital multimeter. Designed by electricians. Built by Fluke.
• Fluke 116 multimeter for air conditioning engineers with temperature and microampere measurement
• TL75 Hard point test lead set
• TPAK ToolPak meter attachment straps with magnet
• Thermocouple with flexible Velcro fastening for pipelines
• 80BK integrated temperature probe
• 80AK-A thermocouple adapter
• C115 soft deluxe carrying case with shoulder strap
Fluke 323 true RMS meter clamp Robust Reliable Precise
• AC current measurement up to 400 A
• AC and DC voltage measurement up to 600 V
• True RMS values for AC voltages and currents for accurate measurements with non-linear signals
• Resistance measurement to 40 kohm with continuity detection
• Sleek, ergonomic design
• Safety specification in accordance with CAT IV 300 V and CAT III 600 V
Fluke C115 soft carrying case
• Light, soft carrying case for optimum protection and with storage space for accessories
Batteries
• 2 x AA
• 9-V battery
HZ 2152-610 - HAZET current clamp meter 2152-610, digital, AC/DC, NCV
172.18 EUR
Digital current clamp meterApplication: Measuring voltage, current and resistance
- Simple operation thanks to a control panel and illuminated LCD display
- Small, handy, compact design for use in confined spaces
- Current measurement alternating current (AC)/direct current (DC) without disconnecting the line
- NCV (Non-Contact Voltage) function
- Measurement category: CAT III 300 V, CAT II 600 V
- Capacitance measurement up to 20 µF
- Pliers opening Ø 17 mm
- Multimeter: continuity test, diode test, data hold, auto power-off function (15 minutes)
- Storage bag and protective cover (protects against drop damage and dust)
- Includes CAT III test lead set
- Suitable for measuring quiescent current, as small currents from 1 mA are detected
Technical data
- Alternating current (AC) voltage:
- 2 V ±(1% +3 D): 1 mV
- 20 V ±(1% +3 D): 10 mV
- 200 V ±(1% +3 D): 100 mV
- 600 V ±(1.2% +3 D): 100 mV
- Alternating current (AC) current:
- 2 A ±(3% +10 D): 1 mA
- 20 A ±(2.5% +8 D): 10 mA
- 100 A ±(2.5% +10 D): 100 mA
- Direct current (DC) voltage:
- 200 mV ±(0.7% +5 D): 0.1 mV
- 2 V ±(0.7% +3 D): 1 mV
- 20 V ±(0.7% +3 D): 10 mV
- 200 V ±(0.7% +3 D): 100 mV
- 600 V ±(0.7% +3 D): 1 V
MEGGER 1013-357 - DCM1500S clamp meter
729.5 EUR
DCM1500S clamp meter for versatile applications, photovoltaic systems and wind turbines- DC voltage up to 2000 V
- AC voltage up to 1500 V
- AC and DC current up to 1500 A
- Smart HOLD
- MIN/MAX
- Automatic range adjustment
- Bluetooth connection to the Megger Link app
- Safety to EN 61010-1/CAT IV 600 V/CAT III 1000 V
- Test leads for photovoltaic systems
The DCM1500S clamp meter measures up to 2000 V DC and 1500 V AC (with PVHV test leads) and up to 1500 A AC or DC and is ideal for use in the installation, maintenance, monitoring and testing of photovoltaic systems as well as electrical devices that are supplied with AC or DC voltage.
The meter is supplied with both standard 4-mm test leads and the new PVHV1 (4 mm) and PVHV2 (PV) HV-DC wiring harnesses. It features a large, clear backlit display and an automatic torch in the clamp meter to facilitate use in poorly lit areas.
HIOKI CM3281 - Current clamp meter, digital, AC/DC, up to 2000 A
156.93 EUR
AC clamp meter CM3281Large clamping jaw for clamping with ease, measure thick cables directly at the clamp
Hioki's clamp meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CM3281 is an average rectified 2000 A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, a thin and compact clamp core and an optional flexible current sensor that you can attach to let you get into even the tightest spots.
Large clamping jaw for clamping with ease
The new and innovative design allows you to get between narrow cable gaps despite the large jaw, improving work efficiency at the worksite. The compact meter offers a wide measuring range from a few amperes up to 2000 A.
Main features
- AC only, measure up to 2000 A AC
- -25°C to 65°C operating temperature range
- Also measures resistance, continuity, AC and DC voltage
PCE INSTRUMENTS PCE LCT 1 - Leakage current clamp meter PCE-LCT 1
197.24 EUR
Clamp-on current meter PCE-LCT 1- Digital clamp-on current meter for checking leakage current
- RMS current measurement
- Continuity and resistance testing
- Voltage measurement up to 400 V
Product benefits:
With the PCE-LCT 1 clamp-on current meter it is possible to measure leakage currents in the range up to 100A. Leakage currents occur when a current passes through an electrical conductor that is not normally intended for conducting current. The PCE-LCT 1 clamp-on current meter detects these currents and shows them on the display.
With the help of the PCE-LCT 1 clamp-on current meter, faults in the insulation, for example, can be detected. This is particularly advantageous where machines are operated that cannot or must not be switched off and where the insulation has not yet been tested. Because the clamp-on meter can measure not only leakage currents but also the normal current flow, voltage up to 400 V, resistance and continuity, it is ideally suited to the industrial electrician who has to perform other measuring tasks in addition to testing equipment.
PCE INSTRUMENTS PCE CM 7 - PCE-CM 7 digital current clamp meter
90.47 EUR
PCE Instruments PCE-CM 7 digital current clamp meter- Display range: 6000 counts
- Measurement range selection: automatic or manual
- Min, max and hold function
- 2-inch LC display
- Built-in LED torch
- Automatic shut-off
Product benefits:
The digital current clamp meter is a multifunctional measuring instrument for the precise measurement of alternating and direct voltage as well as alternating and direct current that can be measured without direct contact to the wire. The digital current clamp meter is suitable for measuring resistances, temperature, diodes, continuity, frequencies and capacitances and is particularly useful for diagnosing electrical and electronic components.
For maximum measurement accuracy, the digital current clamp meter supports True RMS for non-sinusoidal waveforms and a Low Impedance (LoZ) function to reduce interference. Non-contact voltage testing enables reliable detection of voltages in cables and sockets.
GOSSEN METRAWATT METRACLIP 61 - METRACLIP 61 - Digital leakage current clamp meter
618.54 EUR
Leakage current clamp meter with DATA HOLD and maximum/minimum display• Measurement of leakage currents and charging currents
• Digital and bar graph display
• 2 measurement ranges of 30/300 mA and 30/300 A
• Unaffected by external magnetic fields
• Jaw size 40 mm
• Compact, practical and easy
BENNING CM 2-1 - Clamp meter CM2-1, digital, AC/DC, up to 400 A
280.14 EUR
Digital current clamp multimeter BENNING CM 2-1: Multifunctional and powerful thanks to TRUE RMS measuring method for industrial applications.- Precise current measurement up to 400 A AC / DC
- Measure high currents safely and without contact
- Measurement of small currents (motor vehicles, photovoltaics, industry)
- Voltage measurement up to 600 V AC / DC
- Resistance measurements up to 40 MO
- Frequency and capacitance measurement
- Acoustic and optical continuity test
- Diode test
- AutoV function with low input impedance (LoZ) to suppress ''reactive voltages''
- Low pass filter (HFR high frequency suppression, 800 Hz) for measurements on clocked motor drives
- Volt sensor for contactless phase and cable break testing (LCD / buzzer)
- Protective bag, test leads and batteries included
PANCONTROL PAN 3000A+ - Current clamp meter, digital, AC/DC, up to 3000 A, TRMS
144.31 EUR
PAN 3000A+ flexible current clamp meter 3000 A AC True RMS with automatic function selection- True RMS (True RMS measurement)
- Digital display 21 mm
- Backlight
- LED torch
- Data hold
- Automatic range selection
- Automatic shut-off
Included in delivery:operating instructions, test lead, bag
Technical data
- DC voltage (V =) 1 mV - 600 V
- AC voltage (V ~) 1 mV - 600 V
- AC (A ~) 10 mA - 3000 A
- Resistance (O) 1 O - 6 MO
- Acoustic continuity tester - < 50 O
- Frequency (Hz) 0.1 Hz - 10 kHz
- Accuracy (%) 1% - 3%
- Jaw size (mm) 160 mm
- Dimensions of device: 176 x 335 x 30 mm
- Weight (gross/net) 503/204 g
- Required battery(s): 3 x 1.5 V AAA
- Measurement category (CAT) CAT IV 600 V
PANCONTROL PAN 127 - Current clamp meter, digital, AC/DC, up to 400 A
129.73 EUR
PAN 127 - digital current clamp meter 400 A AC/DC- Contactless voltage tester (NCV)
- 1-pin phase tester
- Digital display 11 mm
- Backlight
- Diode test
- Data hold
- Relative value measurement
- Automatic and manual ranging
- Automatic shut-off
Included in delivery: operating instructions, test lead, type K temperature sensor, bag
Technical data
- DC voltage (V =) 0.1 mV - 600 V
- AC voltage (V ~) 0.1 mV - 600 V
- DC (A =) 0.01 A - 400 A
- AC (A ~) 0.01 A - 400 A
- Resistance (O) 0.1 O - 40 MO
- Acoustic continuity tester - < 150 O
- Frequency (Hz) 10 Hz - 10 kHz
- Duty cycle in % (PWM) 0.1 - 99.9%
- Capacity (F) 0.1 µF - 100 µF
- Temperature (°C) (K type sensor) -20°C - +760°C
- Accuracy (%) 0.8% - 3%
- Jaw size (mm) 30 mm
- Dimensions of device: 202 x 76 x 44 mm
- Weight (gross/net) 552/236 g
- Required battery(s): 2 x 1.5 V AAA
- Measurement category (CAT) CAT III 600 V
HIOKI CM4373-90 - Current clamp meter, digital, AC/DC, up to 2000 A, TRMS with Z32
691.05 EUR
AC clamp meter CM4373-90 (supplied with the Z3210 wireless adapter)- True RMS 2000 A AC/DC current clamp meter for the most challenging situations
- With DMM features that provide maximum safety
Hioki's clamp meters are first-class meters that leverage Hioki's expertise in current measurement technology. The CM4373-50 is a 2000 A True RMS clamp meter that features stronger clamping jaws and an IP54 dustproof and waterproof enclosure to allow professionals to work quickly in challenging situations, such as designing, repairing and maintaining plants and equipment such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 2000 V (*1) is ideal for clamp maintenance inspections of electrical and solar power systems.
Main features
- CAT. IV 600 V, CAT. III 1000 V
- When using the P2000: CAT. III 2000 V, CAT. IV 1000 V
- Measurement of DC voltages up to 2000 V (*1) for testing open voltages on solar modules
- Simultaneous measurement of inrush current in RMS and crest values
FLUKE 301D - 301D current clamp meter, digital, AC/DC, up to 600 A
192.07 EUR
Fluke 301D compact AC/DC clamp meterProfessional measurements in a compact pocket size
The Fluke 301D series AC/DC clamp meter has a lightweight, compact body. Designed for use on the go, it fits in any pocket. The narrow jaws fit easily even between cables that are routed close to each other. The 301D measures current, voltage, resistance, continuity, frequency (voltage and current), capacitance and diodes, making it possible to meet a wide range of testing requirements with a single tool. With AC/DC functionality, it is ideal for troubleshooting HVAC systems, residential modules, lighting systems and commercial equipment.
Features
- DC/AC measurement range of 600 A, high resolution of 0.01 A
- Narrow, thin 10-mm jaws for confined spaces
- Tests voltage, resistance and continuity
- Tests current and voltage frequency
- Tests capacitance and diodes
Complete test functions
- AC and DC voltage measurement
- AC and DC current measurement
- Resistance measurement
- Continuity measurement
- Capacitance measurement
- Diode testing
- Frequency measurement
- Hold function for measured value display
GOSSEN METRAWATT METRALINE VCSEDC - METALINE VC SENSE DC current/voltage clamp meter, AC/DC, 200 A,
441.38 EUR
Current/voltage tester for AC and DC measurementsCurrent/voltage tester enables non-contact and single-pole voltage measurement from > 90 V to 1000 V L-L.
The METRALINE VC SENSE DC is an extremely versatile test instrument with numerous measurement functions that has proven itself in various applications. Whether voltage testing, resistance measurement, continuity testing or diode testing - the vibration motor and sound generator enable the device to provide reliable feedback and precise test results. Thanks to the innovative DC measurement method, which is unique on the market, you are ideally equipped for any situation in routine daily testing.
- User-friendly operation seamlessly fits in with your daily routine
- Comfortable and safe operation guaranteed!
- Versatile thanks to the very narrow measuring fork
- Inductive current measurement
- Vibration motor and sound generator for reliable feedback
- Innovative DC measurement - unique on the market
Included in delivery
1x METRALINE VC SENSE M611U
2x 4-mm test probe adapters
2x protective caps CAT III/1000 V, GS 38
2x batteries (1.5 V, AAA, IEC LR03)
1x operating instructions
UNI-TREND UT 210B - Current clamp meter, digital, AC, up to 200 A
40.95 EUR
TrueRMS mini current clamp meter UT210B.Functions and characteristics:
- Current measurement up to 200 A AC
- TRMS true RMS measurement
- Current clamp for conductors up to 17 mm in diameter
- Non-contact voltage testing
- Data hold
- Min/max function
- Relative value measurement
- Backlight
- Automatic shut-off
- Battery warning
- Input fuse
Technical data:
Basic accuracy: 1.0%
LC display: 39 x 26 mm, illuminated
Display range: 2000 counts
Current measurement, AC: 0 - 200 A/±1.0% + 9 dgt.
Dimensions: 155 x 60 x 33 mm/160 g
Included in delivery:
Clamp meter, batteries, manual
PCE INSTRUMENTS PCE CM 6 - PCE-CM 6 digital current clamp meter
85.82 EUR
PCE Instruments PCE-DM 6 digital current clamp meter- Display range: 6000 counts
- Measurement range selection: automatic or manual
- Min, max and hold function
- 2-inch LC display
- Built-in LED torch
- Automatic shut-off
Product benefits:
The digital current clamp meter is a multifunctional measuring instrument for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the wire. The digital current clamp meter is suitable for measuring resistances, temperature, diodes, continuity, frequencies and capacitances and is particularly useful for diagnosing electrical and electronic components.
For maximum measurement accuracy, the digital current clamp meter supports True RMS for non-sinusoidal waveforms and a Low Impedance (LoZ) function to reduce interference. Non-contact voltage testing enables reliable detection of voltages in cables and sockets.
PCE INSTRUMENTS PCE DC1 - Current clamp meter PCE-DC1
90.47 EUR
PCE-DC1 ampere meter - Digital mini ammeter for AC current
- AC voltage
- DC current and frequency (3 in 1)
- Max. jaw size: 18 mm
Product benefits:
This ammeter is designed to indirectly detect AC/DC currents and frequency. A non-contact voltage tester function and a torch to illuminate the measuring point have also been integrated into this ammeter. The small size of this clamp meter allows it to be used in hard-to-reach places.
The large, illuminated display of this ammeter ensures that it is very easy to read, even in dark areas, such as in control cabinets and cable ducts. The non-contact voltage tester function not only helps you to detect dangerous potentials, but also gives you an accurate tool for identifying cable breakage positions.
FLUKE 117/323 - Fluke combo kit with multimeter for electricians
504.43 EUR
This combo kit combines the new digital multimeter Fluke 117 with the clamp meter Fluke 323 in the new soft carrying case C115, which offers excellent protection when transporting the equipment.This kit is to help electricians and A/C engineers in troubleshooting and offers high savings per unit price.
Fluke 117 digital multimeter. Designed by electricians. Built by Fluke.
• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic selection of AC/DC
• Low impedance prevents measuring faults due to stray voltages
• Large white LED-backlight for work in poorly lit areas
• True RSM measurements for accurate readings with non-linear loads
• Measures 10 A (20 A overload for 30 seconds)
• Resistance, continuity, frequency and capacity
• Min/max/average to record signal fluctuations
• Compact design for ergonomic one-hand operation
• Security specification according to CAT III 600 V
Fluke 323 true RMS meter clamp Robust Reliable Precise
• AC current measurement up to 400 A
• AC and DC voltage measurement up to 600 V
• True RMS values for AC voltages and currents for accurate measurements with non-linear signals
• Resistance measurement to 40 kohm with continuity detection
• Sleek, ergonomic design
• Safety specification in accordance with CAT IV 300 V and CAT III 600 V
Fluke C115 soft carrying case
• Light, soft carrying case for optimum protection and with storage space for accessories
Batteries
• 2 x AA
• 9-V battery
BENNING CM P2 - CM P2 current clamp meter, digital, TRMS, 0.1 - 400 A AC/DC
154.04 EUR
BENNING CM P2 TRUE RMS mini AC/DC current clamp metersApplication
Thanks to their compact design and low weight, the new mini clamp meters will fit in any pocket. They are small, handy and ready to use at any time.
- Precise measurement of load currents up to 400 A
- Inrush current measurement (INRUSH) of motors and lighting systems
- Low-pass filter (LPF, approx. 160 Hz) for suppressing high-frequency pulses on clocked motor drives
Measuring functions
- TRUE RMS AC current measurement up to 400 A
- DC current measurement up to 400 A
- Voltage sensor (NCV) for non-contact detection of phase voltage
Features
- True RMS measurement
- Maximum resolution of 10 mA in the 40.00-mA range
- LC display with backlight
- Measured value memory (HOLD) and zero calibration using ZERO key (?)
- Automatic range selection, automatic switch-off (APO after 15 min., can be deactivated) and battery undervoltage indicator
- Measurement category CAT III 600 V
Technical data
- Display scope: 4000
- Basic accuracy: 0.02
- Current AC: 10 mA - 400 A
- Current DC: 10 mA - 400 A
- Voltage sensor: yes
- Memory function: HOLD, INRUSH, LPF, ZERO
- Measurement method: TRUE RMS
- Max. jaw size: 23 mm
- Dimensions: 149 x 59 x 27 mm
- Weight: 140 g
- Measurement category: CAT III 600 V
Protective bag included
TESTO 0590 7702 - testo 770-2 current clamp meter
241.27 EUR
The testo 770-2 current clamp meter greatly simplifies work at confined measuring points such as control cabinets. The movable clamp arm of the current clamp meter can be fully retracted into the device. This allows conductors in confined spaces, such as cables, to be gripped precisely and checked for faults.- Temperature adapter for type K thermocouples
- Fully retractable clamp arm for easy work
- Auto AC/DC and large two-line display
- Measurement functions for starting current for electric motors and micro measurements
It also enables measurement of the starting current of electric motors and ionisation current testing in the µA range. Using the supplied temperature adapter for thermocouple probes, temperatures can be measured in addition to electrical parameters (suitable type K thermocouple probe can be ordered separately). The current clamp meter detects and selects AC/DC automatically, and selects other electrical parameters such as resistance, continuity, diode and capacitance. This makes using the device easier and more reliable than ever. The two-line display shows your measured values clearly and concisely.
METRIX CHAU MX0350Z - MX 350 current clamp meter, TRMS, current, voltage, resistance,
248.61 EUR
The multimeter clamp features all basic measurement functions (AC and DC voltage, AC current, resistance and continuity tests) and fits well in your hand. Technical data
- 6000-digit display
- True RMS measurement (TRMS)
- Enclosure diameter: 26 mm
- AC currents: 60.00 A/400.0 A
- AC voltages: 60.00 V/600.0 V
- DC voltages: 60.00 V/600.0 V
- Resistors: 600.0 ohm
- Acoustic continuity test, diode test
- Measurement functions: HOLD
- Electrical safety: IEC/EN 61010 CAT III 600 V
METRIX CHAU MX0355Z - MX 355 current clamp meter, TRMS, current, voltage, resistance,
354.76 EUR
The multimeter clamp features all basic measurement functions (AC and DC voltage, AC and DC current, resistance and continuity tests) and fits well in your hand. The versatile clamp meter can be used by electricians when taking measurements in domestic electrical cabinets or when testing battery power supplies.Technical data
- 6000-digit display
- True RMS measurement (TRMS)
- Enclosure diameter: 30 mm
- AC currents: 60.00 A/400.0 A
- DC currents: 60.00 A/400.0 A
- AC voltages: 60.00 V/600.0 V
- DC voltages: 60.00 V/600.0 V
- Resistors: 600.0 ohm
- Acoustic continuity test, diode test
- Measurement functions: HOLD and PEAK
- Automatic DC zeroing/relative measurements
- Electrical safety: IEC/EN 61010 CAT III 600 V
FLIR VT8-600 - FLIR VT8-600 voltage tester with current clamp meter, 600 V, 100
198.07 EUR
Voltage and current measurement, continuity testingThe FLIR VT8 series features high-quality voltage, continuity and current testers. All models feature an optimised current clamp meter that can fit into tight spaces and works with large-diameter cables. The VT8-600 has a CAT III-600 V/CAT IV-300 V safety rating and supports a 100 A/600 V measuring range. Extensive measurement features make the VT8 series particularly versatile tools. All tasks can be completed with a single tool.
Robust and secure
Manufactured with the level of quality and reliability you have come to expect from FLIR test and measurement tools
A range of functions
Equipped with all required measurement functions including TRMS, voltage and current (AC/DC), continuity testing, resistance and capacitance
Flexible, easy to use
Take measurements in tight spaces thanks to the optimised current clamp meter, and measurements on large-diameter cables thanks to the large clamp opening
Technical data
Non-contact voltage tester [NCV]: >100 Vrms, <10 mm distance (LED/buzzer alerts)
Drop test: 2 m
Warranty: Limited, 3-year
HIOKI CM4373-50 - Clamp meter, digital, AC/DC, up to 2000 A
634.79 EUR
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology.The CM4373-50 is a 2000 A True RMS clamp meter that features stronger jaws, IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 2000 V is ideal for the clamp maintenance inspections of electrical and solar power equipment.
Easy! Just connect the Z3210 Wireless Adapter (sold separately) to your Hioki compatible instrument, to make it Bluetooth® ready. Wirelessly connect Hioki-compliant instruments with a simple connection. Transfer measurements to your smartphone or tablet and quickly create reports with field photos and drawings.
Key Features:
- CAT IV 600 V, CAT III 1000 V
- When using P2000: CAT III 2000 V, CAT IV 1000 V
- Measure DC voltages of up to 2000 V for open voltage inspections of solar panels
- Simultaneously measure inrush current in RMS and crest values
- Easily transfer measurement data to your smartphone or tablet by using the free app GENNECT Cross or to an Excel® file
- Harmonic analysis from 1st to 30th order with GENNECT Cross
- Automatic AC/DC function helps boost work efficiency
MICSIG CP2100A - Current clamp meters/current probe, 800 kHz
392.28 EUR
Micsig CP Series current clamp meters/current probesThe Micsig CP series consists of current clamp meters for Micsig tabletop/portable oscilloscopes from the ATO, STO and TO series. They support bandwidths up to 2.5 MHz and a max. measurable current of 100 A peak/70.7 Aeff (DC + AC peak). The probes are powered via USB and provide both automatic and manual zero adjustment.
- Model: CP2100A
- Bandwidth: DC...800 kHz
- Rise time: < 583 ns
- Ranges: 10 A/100 A
- Output sensitivity:
- Typical DC accuracy:
- 3% ±50 mA (10 A)
- 4% ±50 mA (100 A, 500 mA...40 Apeak)
- 15% (100 A, 40...100 Apeak)
- Signal delay:
- Current measurement range:
- Max. measurable current:
- Max. working voltage: CAT III 300 V, CAT II 600 V
- Max. load voltage: CAT III 300 V, CAT II 600 V
- Max. conductor diameter: 13 mm
- Overload indicator: buzzer, button light flashes
- Power supply: DC 5 V
- Probe head (cm): 11 x 6.1 x 2.5
- Size of control box (cm): 10.8 x 5.6 x 2.6
- Dimensions: 228 cm length, 290 g
0.1 V/A (10 A)
0.01 V/A (100 A)
<150 ns (10 A)
<200 ns (100 A)
50 mA...10 Apeak (10 A)
1...100 Apeak (100 A)
100 Apeak/70.7 Aeff (DC + ACpeak)
200 A peak-to-peak, 70.7 Aeff (AC)
PANCONTROL PAN 200A+ - Current clamp meter, digital, AC, up to 200 A
74.02 EUR
PAN 200A+ digital current clamp meter 200 A AC with automatic function selection- Resolution: 1 mA
- Contactless voltage tester (NCV)
- 1-pole phase test with audible alarm
- Digital display 13 mm
- Backlight
- Automatic range selection
- Data hold
- Automatic shut-off
Included in delivery: operating instructions, test lead, bag
Technical data
- DC voltage (V =) 0.1 V - 600 V
- AC voltage (V ~) 0.1 V - 600 V
- AC (A ~) 1 mA - 200 A
- Resistance (O) 1 O - 6 kO
- Acoustic continuity tester - < 50 O
- Frequency (Hz) 40 Hz - 1000 Hz
- Accuracy (%) 0.5% - 2.5%
- Jaw size (mm) 20 mm
- Dimensions of device: 159 x 60 x 29 mm
- Weight (gross/net) 316/122 g
- Required battery(s): 2 x 1.5 V AAA
- Measurement category (CAT) CAT III 600 V
PEAKTECH 4205 - Flexible current clamp meter P 4205, AC, up to 3000 A
91.19 EUR
P 4205 Flexible current clamp meter, 3000 A AC with 4 mm connectorThis innovative current clamp meter works on the principle of being able to carry out current measurements safely and quickly in conjunction with a multimeter. Due to the flexible design of the jaw, it is possible to insert small but also large cable diameters into the opening. By means of the slide switch, it is possible to set the measuring ranges of the current clamp meter to between 30 / 300 and 3000 A AC.
Thanks to the intuitive design of the device, this current clamp meter is suitable for all sectors in which currents need to be measured, whether in the hobby sector or used professionally in industry.
Technical features:
- Maximum cable diameter of up to 160 mm
- Flexible current clamp meter closure
- Output connection: 4 mm connector
- Range selection: manual
- Touch protection: yes
- Cable length: approx. 100 cm
- A AC max.: 3000 A (current transformer)
- Battery: 1.5 V AAA
- Over-voltage category: CAT III 1000 V, CAT IV 600 V
- Safety: EN 61010-1, EN 61010-2-032, EN 61326-1
- Accessories: batteries and user manual
GOSSEN METRAWATT METRALINE PV1500 - METRALINE PV 1500 current clamp meter, digital, AC/DC, up to 100
367.17 EUR
Current clamp meter for AC and DCLarge, drop-shaped current clamp meter for measurements on busbars
The METRALINE PV 1500 is the ideal solution for effective AC/DC current measurements on busbars up to 1000 A. This large, drop-shaped current clamp meter is specially designed for measurements on busbars. Equipped with a backlit LCD display, automatic shutdown and LPF, this innovative device offers a wide range of measurement functions, from resistance measurement to non-contact voltage detection. Certified to CAT IV 1000 V - CAT III 1500 V, the METRALINE PV 1500 ensures maximum safety and is an indispensable tool for any electrical technician.
- Simple operation means it adapts perfectly to your workflow
- Precise measurement results guaranteed
- Impressive value for money
- LCD with backlight
- AC/DC current measurement up to 1000 A
- Non-contact voltage detection
Included in delivery
- Device
- Quick-start guide
TESTO 0590 7701 - testo 770-1 current clamp meter
190.42 EUR
The testo 770-1 current clamp meter is ideal for non-contact current measurement on tightly packed power cables or conductors with a small diameter. The unique gripping mechanism allows you to grip each individual cable easily and securely.- Large two-line display
- Auto AC/DC
- Fully retractable clamp arm for maximum flexibility
Using this current clamp meter, you can easily cope with even the tightest application environments. The movable clamp arm can be fully retracted into the device, so that you can grip cables in control cabinets like with a hook, for example. Measuring in confined spaces has never been so convenient.
Using the testo 770-1 current clamp meter is also easier and more reliable than ever before. It automatically detects and selects AC/DC and other electrical parameters such as resistance, continuity, diode and capacitance.
The starting current can also be measured. What's more, the two-line display shows your measured values clearly and concisely.
HIOKI CM4371-90 - Current clamp meter, digital, AC/DC, up to 600 A, TRMS with Z321
667.12 EUR
AC clamp meter CM4371-90 (supplied with the Z3210 wireless adapter)- True RMS 600 A AC/DC current clamp meter for the most challenging applications
- With DMM features that provide maximum safety
Main features
- CAT. IV 600 V, CAT. III 1000 V
- When using the P2000: CAT. III 2000 V, CAT. IV 1000 V
- Measurement of DC voltages up to 2000 V (*1) for testing open voltages on solar modules
- Simultaneous measurement of inrush current in RMS and crest values
- Easily transfer measurement data to your smartphone or tablet using our free GENNECT CROSS app or to an Excel® (*2)
- Harmonic analysis from the 1st to the 30th order with our free app GENNECT Cross (*2)
- Automatic AC/DC function to increase work efficiency
Safe inspection of solar systems with high voltage
DC high voltage test mode
- Allows high voltage measurements up to CAT III 2000 V
- Safely measure solar systems such as the Mega Solar without interrupting the grid by simply connecting the P2000 high-voltage DC probe to compatible Hioki clamp meters and digital multimeters (DMMs)
HIOKI CM4001-90 - Current clamp meter, digital, AC up to 600 A, with Z3210
643.14 EUR
AC leakage current clamp meter CM4001-90 (supplied with the Z3210 wireless adapter)- Leakage current meter with remarkable ease of use
- Double your work speed with innovative jaw design
Hioki's clamp meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. Use the CM4001 to easily clamp among crowded cables to reduce working time and improve safety. With guaranteed accuracy from 0.60 mA to 600.0 A, the CM4001 provides a one-stop solution for a variety of applications. A built-in comparator function also helps you find issues much faster.
Remarkable ease of use. Double your speed for checking leakage currents
- Slim jaws allow you to work with ease.
- Easily clamp within crowded cables to save work time and improve safety.
Key features
- Easily transfer measurement data to your smartphone or tablet using our free GENNECT CROSS app or to an Excel® file. (Wireless adapter Z3210 is required)
- Slim jaws let you work with ease
METREL MD 9226 - TRMS AC/DC current clamp meter
243.54 EUR
The MD 9226 is a professional DC and TRMS AC current clamp meter capable of measuring capacitance and frequency. It is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency. The MD 9226 has a wide range of extra features, including peak value, data and MAX hold functions, auto power off, auto-ranging and a relative zero function. It uses state-of-the-art measurement technology and is housed in a sturdy industrial-grade case.?Functions:
• DC and TRMS AC voltage up to 600 V
• DC and TRMS AC current measurement up to 600 A
• Resistance measurement
• Acoustic continuity test
• Diode test
• Frequency measurement
• Capacitance measurement
Features:
• Auto-ranging
• LCD display with backlight, 3-5/6 digit, 6000 count
• Automatic, non-contact detection of electromagnetic fields to locate and trace live conductors
• Data hold function
• MIN/MAX/AVG function
• Peak value
• Relative zero
• 35 mm jaw opening
• CAT IV / 300 V, CAT III / 600 V overvoltage categories
Delivery content:
• MD 9226 Current clamp
• Test lead, 2 pcs
• Battery, 2 pcs
• Pouch, 1 pcs
• User manual
FLUKE 773 - mA process clamp meter
1762.55 EUR
• Highest accuracy in its class: 0.2%• Resolution and sensitivity of 0.01 mA
• Measurement of 4 to 20 mA signals without interrupting the loop
• Measurement of the mA signals for analogue inputs/outputs to the PLC and control system
• Dual backlit display showing the mA reading and the percentage of the 4 to 20-mA span
• Measuring point lighting illuminates hard-to-see wires in dark cabinets
• Removable jaws with extension cable for measurements in confined spaces
• Measuring of 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatic change of the 4 to 20 mA output for tests over greater distances
• Power saving features, auto-off, time-controlled disconnection of the backlight extends the battery life
• Hold function records and displays fluctuating readings
• Measure signals between 4 and 20 mA with a measurement circuit
• Simultaneous measuring of the mA values in the circuit with 24-V-loop current to the power supply and testing of transmitters
• Entering of signals between 4 and 20 mA for the input/output and the power pressure transducers of control systems
• Linear ramp of the mA output or 25% step output signal
• Automatic change of the 4 to 20 mA output for tests over greater distances
• Measurement of DC voltage to test the 24 V power supply or input/output signals of the voltage
• Entering of DC to check of input devices, which tolerate to 5 V or 0 to 10 V input signals
• A scaled mA output provides a continuous mA signal which corresponds with the 4 to 20-mA signal measured by the mA current clamp meter
- Enables logging of the mA signal on a separate logger without interrupting the loop
- The mA output signal allows the recording of a 4 to 20 mA signal on a digital logging multimeter or another device without interrupting the loop
• mA input/output: simultaneous measurements of the mA signal with the clamp meter and source a mA signal
- Place a mA input signal on a device, and measure the 4 to 20 mA output on the devices, such as valves or mA insulators
• Linear ramp of voltage output or 25% step output signal
- Automatic change of voltage output for tests over greater distances
Included with delivery
4 AA batteries
Test leads
Crocodile clips
Carrying strap
Carrying bag
User manual
Environmental data
Diameter of measurable conductor: maximum 0.177 inch or 4.5 mm
IP specification: IP 40
Functional descriptions
mA measurement (measured by clamp meter)
Resolution and measuring range: 0 to 20.99 mA
Inaccuracy: 0.2% + 2 digits
Resolution and measuring range: 21.0 to 100.0 mA
Inaccuracy: 1% + 5 digits
mA measurement (serial measurement with measuring sockets)
Resolution and measuring range: 0 to 24.00 mA
Inaccuracy: 0.2% + 2 digits
mA source power...
FLUKE 771 - mA process clamp meter
986.09 EUR
• Highest accuracy in its class: 0.2%• Resolution and sensitivity of 0.01 mA
• Measurement of 4 to 20 mA signals without interrupting the loop
• Measurement of the mA signals for analogue inputs/outputs to the PLC and control system
• Dual backlit display showing the mA reading and the percentage of the 4 to 20-mA span
• Measuring point lighting illuminates hard-to-see wires in dark cabinets
• Removable jaws with extension cable for measurements in confined spaces
• Measuring of 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatic change of the 4 to 20 mA output for tests over greater distances
• Power saving features, auto-off, time-controlled disconnection of the backlight extends the battery life
• Hold function records and displays fluctuating readings
Environmental data
Diameter of measurable conductor: maximum 0.177 inch or 4.5 mm
IP specification: IP 40
Included with delivery
2 AA batteries
Carrying bag
User manual
Functional descriptions
mA measurement (measured by clamp meter)
Resolution and measuring range: 0 to 20.99 mA
Inaccuracy: 0.2% + 2 digits
Resolution and measuring range: 21.0 to 100.0 mA
Inaccuracy: 1% + 5 digits
HIOKI CM4002 - Leakage clamp meter, digital, AC, up to 2000 A
770.09 EUR
AC Leakage Clamp Meter, 6 mA to 200 A (6 ranges) provide a broad measurement range from leakage currents to load currents, suitable for AC frequencies between 15 Hz and 2000 Hz.A newly designed sensor allows the detection of miniscule leakage currents while offering a core diameter of 40mm. Complies with IEC/EN 61557-13, an international standard for leak clamp meters. Solve GFCI and RCD problems quickly. Easily transfer measurement data to your smartphone or tablet by using HIOKI's free app GENNECT Cross (Bluetooth adapter Z3210 required). CAT IV 300 V, CAT III 600 V
Easy! Just connect the optional Z3210 Wireless Adapter (sold separately) to your Hioki compatible instrument, to make it Bluetooth® ready. Wirelessly connect Hioki-compliant instruments with a simple connection. Transmit measured values to your tablet or smartphone.
Key Features:
- Easily transfer measurement data to your smartphone or tablet by using the free app GENNECT Cross or to an Excel® file (Wireless Adapter Z3210 is necessary)
- Detect minuscule leakage currents with a newly designed sensor (Core jaw diameter up to 40 mm)
- Broad measurement range extending from leakage currents to load currents
- Complies with the performance standard set forth in IEC/EN 61557-13, an international standard on leak clamp meters
- Solve GFCI and RCD problems quickly
- Speed up pass/fail judgments with the built-in comparator function
HIOKI CT6280 - Flexible current clamp meter, AC, 4200 A
219.15 EUR
Flexible AC current sensor CT6280For measuring large diameters and large currents in combination with an AC clamp meter
Main features
- The large diameter loop is ideal for measuring large wires and pairs of wires.
- Only small space required
- Freely bendable
Basic specifications
- Maximum input current 4200 A AC, continuous (50 Hz to 60 Hz)
- Core jaw diameter 130 mm (cross-sectional diameter of sensor cable: 5 mm, diameter of sensor cap: 7 mm (0.28 in))
- Dimensions and weight: 42 mm (1.65 in.) W x 65 mm (2.56 in.) H x 18 mm (0.71 in.) T (without flexible loop and output cable), 71 g (2.5 oz.)
- Cable length 800 mm (31.5 in.)
- Included accessories: 1 x carrying case C0205
TESTBOY TV 216 N - Current clamp meter, digital, AC, 600 A, TRMS
357.75 EUR
Thanks to its diverse measuring functions, the digital clamp ammeter Testboy TV 216N can be used universally.Useful details such as the large display, manual or automatic measuring range selection and measuring point illumination make it particularly convenient and safe to use.
Product benefits:
- Large variety of functions
- Easily readable LCD
- LED measuring point illumination
- Non-contact measurement of frequencies and sampling rate
- T-RMS measurement method for non-sinusoidal voltages
Technical features:
- Direct current up to 600 A
- AC current up to 600 A T-RMS
- Min or max value measurement
- Direct and alternating voltage up to 600 V
- Resistance up to 60 MOhm
- Frequency measurement 10 Hz to 10 kHz
- Capacitance measurement up to 60 mF
- Acoustic continuity test
- Diode test