FLUKE 1507 - Fluke insulation tester 1507
806.35 EUR
Access the complete sheet with information, compare prices and identify the features of PRODUCTNAME, available at the price of PRICE CURRENCY; it inserts into the CATEGORY NAME; the product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
The Fluke 1507 and 1503 insulation testers are handy, robust, reliable and easy to use. Since they have multiple test voltages, they are ideal for troubleshooting, set-up and preventative maintenance.
• Insulation testing range: 0.01 Mohm to 10 Gohm
• Insulation testing voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
• Automatic calculation of the polarisation index and dielectric absorption level
• With the Compare function (good/bad) repetitive tests can be performed quickly and easily
• A probe with release button makes repetitive tests or tests on hard-to-reach objects easier
• Detection of live circuits prevents insulation tests at voltages over 30 V and thus increases the protection of the user
• Automatic discharge of capacitive voltages for higher protection for the user
• AC/DC voltage: 0.1 V to 600 V
• 200 mA continuity
• Resistance: 0.01 ohm - 20.00 kohm
• Automatic shut-off to save battery power
• Large backlit display for easy reading of measurements
• Overvoltage category CAT IV 600 V for increased protection of the user
• Probe with release button, test leads, test probes and crocodile clips included
• Mounting options for the optional magnet holder Fluke TPAK for hands-free operation
• Four alkaline batteries type AA (NEDA 15 A or IEC LR6) for more than 1000 insulation tests
Included with delivery
TP165x slim probe with release button
TL224 SureGrip silicon test lead set
TP74 probes with pointed 4 mm banana plugs
Crocodile clips
User manual
4 AA batteries
AC and DC voltage measurement
Inaccuracy
Range: 600.0 V
Resolution: 0.1 V
50 Hz to 400 Hz ± (% of MW + digits) ±(2% + 3)
Input impedance: 3 Mohm (nominal), < 100 pF
Common-mode rejection ratio (1 kohm unbalanced): > 60 dB at DC, 50 Hz or 60 Hz
Overload protection: 600 V effective or DC
Protective conductor resistance measurement
Range/resolution: 20.00 ohm 0.01 ohm
200.0 ohm 0.1 ohm
2000 ohm 1.0 ohm
20.00 kohm 0.01 kohm
Inaccuracy: ±(1.5% + 3)
Overload protection: 2 V effective or DC
Idle test voltage: > 4.0 V, < 8 V
Short-circuit current: > 200.0 mA
Measuring and test functions
Measuring range: 0.01 Mohm to 10 Gohm
Test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
Inaccuracy of the test voltage: + 20%, - 0%
Short-circuit current: 1 mA nominal
Automatic discharge: discharge time < 0.5 seconds at C = 1 µF or less
Display for power circuit: prevents the test if external voltage before the beginning of the tests > 30 V
Maximum capacitive load: can be operated with up to 1 µF load
Inaccuracy when measuring:
50 V: ±(3% + 5)
100 V: ±(3% + 5)
250 V: ±(1.5% + 5)
500 V: ±(1.5% + 5)
1000 V: ±(1.5% + 5) up to 2000 Mohm, ±(10% + 3) over 2000 Mohm
EAN: 0095969288675
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
The Fluke 1507 and 1503 insulation testers are handy, robust, reliable and easy to use. Since they have multiple test voltages, they are ideal for troubleshooting, set-up and preventative maintenance.
• Insulation testing range: 0.01 Mohm to 10 Gohm
• Insulation testing voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
• Automatic calculation of the polarisation index and dielectric absorption level
• With the Compare function (good/bad) repetitive tests can be performed quickly and easily
• A probe with release button makes repetitive tests or tests on hard-to-reach objects easier
• Detection of live circuits prevents insulation tests at voltages over 30 V and thus increases the protection of the user
• Automatic discharge of capacitive voltages for higher protection for the user
• AC/DC voltage: 0.1 V to 600 V
• 200 mA continuity
• Resistance: 0.01 ohm - 20.00 kohm
• Automatic shut-off to save battery power
• Large backlit display for easy reading of measurements
• Overvoltage category CAT IV 600 V for increased protection of the user
• Probe with release button, test leads, test probes and crocodile clips included
• Mounting options for the optional magnet holder Fluke TPAK for hands-free operation
• Four alkaline batteries type AA (NEDA 15 A or IEC LR6) for more than 1000 insulation tests
Included with delivery
TP165x slim probe with release button
TL224 SureGrip silicon test lead set
TP74 probes with pointed 4 mm banana plugs
Crocodile clips
User manual
4 AA batteries
AC and DC voltage measurement
Inaccuracy
Range: 600.0 V
Resolution: 0.1 V
50 Hz to 400 Hz ± (% of MW + digits) ±(2% + 3)
Input impedance: 3 Mohm (nominal), < 100 pF
Common-mode rejection ratio (1 kohm unbalanced): > 60 dB at DC, 50 Hz or 60 Hz
Overload protection: 600 V effective or DC
Protective conductor resistance measurement
Range/resolution: 20.00 ohm 0.01 ohm
200.0 ohm 0.1 ohm
2000 ohm 1.0 ohm
20.00 kohm 0.01 kohm
Inaccuracy: ±(1.5% + 3)
Overload protection: 2 V effective or DC
Idle test voltage: > 4.0 V, < 8 V
Short-circuit current: > 200.0 mA
Measuring and test functions
Measuring range: 0.01 Mohm to 10 Gohm
Test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
Inaccuracy of the test voltage: + 20%, - 0%
Short-circuit current: 1 mA nominal
Automatic discharge: discharge time < 0.5 seconds at C = 1 µF or less
Display for power circuit: prevents the test if external voltage before the beginning of the tests > 30 V
Maximum capacitive load: can be operated with up to 1 µF load
Inaccuracy when measuring:
50 V: ±(3% + 5)
100 V: ±(3% + 5)
250 V: ±(1.5% + 5)
500 V: ±(1.5% + 5)
1000 V: ±(1.5% + 5) up to 2000 Mohm, ±(10% + 3) over 2000 Mohm
EAN: 0095969288675
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
FLUKE 9062 - Rotation direction tester for three-phase power supply/motors
320.55 EUR
Unique rotation direction tester for three-phase power supply systems and motorsThe unique tester Fluke 9062 provides a rotating field and motor rotation indicator display combined with the advantages of non-contact measurement. Fluke 9062 is designed for commercial and industrial applications and provides a quick view of the three-phase rotation direction when using the supplied test leads. You can also use the device to determine the rotation direction of synchronous and asynchronous three-phase motors. The non-contact measurement is ideal for motors in which the shaft is not visible. The supplied test probes have a variable clamping range, providing a secure contact for industrial power sockets.
• 3-phase display
• Display of phase rotation direction
• Display of motor rotation direction
• Non-contact measurement of the rotation direction of the running motors
Technical data:
Voltage range: up to 400 V
Phase display: 120 - 400 V AC
Frequency range: 2 - 400 Hz
Battery life: continuous
Dust/waterproof: IP 40
Safety: EN 61010, EN 61557-7
Over-voltage category: CAT III 300 V
Dimensions: 124 x 61 x 27 mm
Weight: 0.15 kg
Batteries: 1 x 9 V
Included with delivery:
Rotation direction tester for three-phase supply systems and motors
3 test leads
3 test probes
3 crocodile clips
9-V battery
User manual
FLUKE T150 VDE - Voltage and continuity tester T150 VDE
235.23 EUR
The new Fluke voltage and continuity testers with the latest measurement and safety/security technology are now even more stable and user-friendly than ever before. They simplify your work and offer the best combination of security, ease of use and direct notifications in all work situations.• Safety specification: CAT III 690 V, CAT IV 600 V, HSE GS 38 (probes), IEC EN 61243-3: 2010
• LCD and LED display
• A continuity test with audible signal and vibration emitter for tactile feedback
• Backlit reading display
• Tactile feedback from vibration emitter
• Battery voltage display
• Voltage detection even when batteries are discharged
• Improved accommodation of the test probes for secure storage
• Rotating field indicator for three-phase systems
• Function to check RCDs. Connection of a load using two-button operation offers the possibility to draw a higher current from the circuit to be measured and to trigger residual current devices (RCDs).
• Keep the reading on the display
• Built-in electric flashlight
• Rapid determination of live conductors using a single-pole phase test
• Slide-on probes, guard for test probes and accessories for storage
• Guard for test probes and accessories for storage. With the guard you always have one hand free when opening the safety sockets.
• Resistance measurement up to 1999 ohm
• Detection of damaged test leads with WearGuard™ insulation
Technical data:
DC and AC voltage: 6 V - 690 V
Continuity test: 0 - 400 kO
Frequency measurement: 0 / 40 - 400 Hz
Phase rotation direction: 100 V - 690 V
Resistance measurement: up to 1999 ohm
Response time (LEDs): < 0.5 s
200 k ohm input impedance: power consumption 3.5 mA at 690 V / current consumption 1.15 mA at 230 V
7 k ohm input impedance (engaged load): power consumption 30 mA at 230 V
Safety specification: CAT III 690 V, CAT IV 600 V
IP specification: IP64
Power supply: 2 AA batteries
Net weight: 280 g
Dimensions (L x W x H): 26 x 7 x 3.8 cm
FLUKE T110 VDE - Voltage and continuity tester T110 VDE
139.88 EUR
The new Fluke voltage and continuity testers with the latest measurement and safety/security technology are now even more stable and user-friendly than ever before. They simplify your work and offer the best combination of security, ease of use and direct notifications in all work situations.• Safety specification: CAT III 690 V, CAT IV 600 V, HSE GS 38 (probes), IEC EN 61243-3: 2010
• LED display
• A continuity test with audible signal and vibration emitter for tactile feedback
• Measured value display with backlight
• Tactile feedback from vibration emitter
• Battery voltage display
• Voltage detection even when batteries are discharged
• Improved accommodation of the test probes for secure storage
• Rotating field indicator for three-phase systems
• Function to check RCDs. Connection of a load using two-button operation offers the possibility to draw a higher current from the circuit to be measured and to trigger residual current devices (RCDs).
• Built-in electric flashlight
• Rapid determination of live conductors using a single-pole phase test
• Slide-on probes, guard for test probes and accessories for storage
• Guard for test probes and accessories for storage. With the guard you always have one hand free when opening the safety sockets.
• Detection of damaged test leads with WearGuard™ insulation
Technical data:
AC and DC voltage: 12 V - 690 V
Continuity test: 0 - 400 kO
Frequency measurement: 0 / 40 - 400 Hz
Phase rotation direction: 100 V - 690 V
Response time (LEDs): < 0.5 s
200 k ohm input impedance: power consumption 3.5 mA at 690 V / Current consumption 1.15 mA at 230 V
7 K ohm input impedance (engaged load): Power consumption 30 mA at 230 V
Safety specification: CAT III 690 V, CAT IV 600 V
IP specification: IP64
Power supply: 2 AA batteries
Net weight: 280 g
Dimensions (L x W x H): 26 x 7 x 3.8 cm
PEAKTECH 2695-2 - Digital insulation tester, 3 ½ digits
192.85 EUR
Poorly insulated equipment or systems can lead to the formation of dangerous leakage currents. This device measures insulation, AC and DC voltage and continuity of circuits, automatic circuit breakers, fuses etc. in line with VDE-0413 part 1. Automatic discharge of capacitors and automatic detection of 30 V circuits.• LCD dual display: 3.5 digits, illuminated, with bar graph
• Insulation resistance: 4/40/400/4000 MOhm (1 KOhm), ±2%
• Test voltage: 125/250/500/1000 V, +10%
• Short-circuit current: < 1 mA
• Test current: 1 mA with 125/250/500 kW load
• Voltage: 750 V AC (1 V), ±1.2%/1000 V DC (1 V), ±0.8%
• Resistance: 40/400 Ohm (10 MOhm), ±1.2%
• Dimensions: 92 x 200 x 50 mm, 700 g
• Safety: EN-61010-1, CAT III 1000 V
• Other features: min./max./measured value hold function, battery status indicator, automatic shut-off
• Includes: case, 6x AA batteries, test leads and user manual
FLUKE T130 VDE - Voltage and continuity tester T130 VDE
205.92 EUR
The new Fluke voltage and continuity testers with the latest measurement and safety/security technology are now even more stable and user-friendly than ever before. They simplify your work and offer the best combination of security, ease of use and direct notifications in all work situations.• Safety specification: CAT III 690 V, CAT IV 600 V, HSE GS 38 (probes), IEC EN 61243-3: 2010
• LCD and LED display
• A continuity test with audible signal and vibration emitter for tactile feedback
• Backlit reading display
• Tactile feedback from vibration emitter
• Battery voltage display
• Voltage detection even when batteries are discharged
• Improved accommodation of the test probes for secure storage
• Rotating field indicator for three-phase systems
• Function to check RCDs. Connection of a load using two-button operation offers the possibility to draw a higher current from the circuit to be measured and to trigger residual current devices (RCDs).
• Keep the reading on the display
• Built-in electric flashlight
• Rapid determination of live conductors using a single-pole phase test
• Slide-on probes, guard for test probes and accessories for storage
• Guard for test probes and accessories for storage. With the guard you always have one hand free when opening the safety sockets.
• Detection of damaged test leads with WearGuard™ insulation
Technical data:
DC and AC voltage: 6 V - 690 V
Continuity test: 0 - 400 kO
Frequency measurement: 0 / 40 - 400 Hz
Phase rotation direction: 100 V - 690 V
Response time (LEDs): < 0.5 s
200 k Input impedance: power consumption 3.5 mA at 690 V/ current consumption 1.15 mA at 230 V
7 K? Input impedance (engaged load): power consumption 30 mA at 230 V
Safety specification: CAT III 690 V, CAT IV 600 V
IP specification: IP64
Power supply: 2 AA batteries
Net weight: 280 g
Dimensions (L x W x H): 26 x 7 x 3.8 cm
FLUKE 1503 - Fluke insulation tester 1503
619.16 EUR
The Fluke 1507 and 1503 insulation testers are handy, robust, reliable and easy to use. Since they have multiple test voltages, they are ideal for troubleshooting, set-up and preventative maintenance.• Insulation testing range: 0.1 Mohm to 2000 Mohm
• Insulation testing voltages: 500 V, 1000 V
• A probe with release button makes repetitive tests or tests on hard-to-reach objects easier
• Detection of live circuits prevents insulation tests at voltages over 30 V and thus increases the protection of the user
• Automatic discharge of capacitive voltages for higher protection for the user
• AC/DC voltage: 0.1 V to 600 V
• 200 mA continuity
• Resistance: 0.01 ohm - 20.00 kohm
• Automatic shut-off to save battery power
• Large backlit display for easy reading of measurements
• Overvoltage category CAT IV 600 V for increased protection of the user
• Probe with release button, test leads, test probes and crocodile clips included
• Mounting options for the optional magnet holder Fluke TPAK for hands-free operation
• Four alkaline batteries type AA (NEDA 15 A or IEC LR6) for more than 1000 insulation tests
AC and DC voltage measurement
Inaccuracy
Range: 600.0 V
Resolution: 0.1 V
50 Hz to 400 Hz ± (% of MW + digits) ±(2% + 3)
Input impedance: 3 Mohm (nominal), < 100 pF
Common-mode rejection ratio (1 kohm unbalanced): > 60 dB at DC, 50 Hz or 60 Hz
Overload protection: 600 V effective or DC
Protective conductor resistance measurement
Range/resolution: 20.00 ohm 0.01 ohm
200.0 ohm 0.1 ohm
2000 ohm 1.0 ohm
20.00 kohm 0.01 k ohm
Inaccuracy: ±(1.5% + 3)
Overload protection: 2 V effective or DC
Idle test voltage: > 4.0 V, < 8 V
Short-circuit current: > 200.0 mA
Measuring and test functions
Measuring range: 0.01 Mohm up to 2000 Mohm
Test voltages: 500 V, 1000 V
Inaccuracy of the test voltage: + 20%, - 0%
Short-circuit current: 1 mA nominal
Automatic discharge: discharge time < 0.5 seconds at C = 1 µF or less
Display for power circuit: prevents the test if external voltage before the beginning of the tests > 30 V
Maximum capacitive load: can be operated with up to 1 µF load
Inaccuracy when measuring:
50 V: ±(3% + 5)
100 V: ±(3% + 5)
250 V: ±(1.5% + 5)
500 V: ±(1.5% + 5)
1000 V: ±(1.5% + 5) up to 2000 Mohm, ±(10% + 3) over 2000 Mohm
Included with delivery
TP165x slim probe with release button
TL224 SureGrip silicon test lead set
TP74 probes with pointed 4 mm banana plugs
Crocodile clips
User manual
4 AA batteries
FLUKE T90 - Voltage and continuity tester T90
102.15 EUR
The new Fluke voltage and continuity testers with the latest measurement and safety/security technology are now even more stable and user-friendly than ever before. They simplify your work and offer the best combination of security, ease of use and direct notifications in all work situations.• Safety specification: CAT II 690 V, CAT III 600 V, HSE GS 38 (probes), IEC EN 61243-3: 2010
• LED display
• Continuity test with audible signal
• Backlit reading display
• Battery voltage display
• Voltage detection even when batteries are discharged
• Improved accommodation of the test probes for secure storage
• Rapid determination of live conductors using a single-pole phase test
• Slide-on probes, guard for test probes and accessories for storage
• Guard for test probes and accessories for storage. With the guard you always have one hand free when opening the safety sockets.
• Detection of damaged test leads with WearGuard™ insulation
Technical data:
DC and AC voltage: 12 V - 690 V
Continuity test: 0 - 400 kO
Frequency measurement: 0 / 40 - 400 Hz
Response time (LEDs): < 0.5 s
200 k ohm input impedance: power consumption 3.5 mA at 690 V / current consumption 1.15 mA at 230 V
Safety specification: CAT II 690 V, CAT III 600 V
IP specification: IP54
Power supply: 2 AA batteries
Net weight: 180 g
Dimensions (L x W x H): 23 x 6.5 x 3.8 cm
MEGGER 1004-735 - MIT410/2 insulation resistance tester
951.56 EUR
MIT410/2 CAT IV insulation resistance tester- Ideal for energy providers
- Insulation measurement up to 1 kV/200 GO
- Stabilised insulation test voltage
- Faster single-range continuity testing 0.01 O to 1 MO
- Test voltage continuously adjustable from 10 V to 1000 V *
- 600 V TRMS AC and DC voltage measurement
- Test result memory and Bluetooth® *
- Detects and protects against live circuit
- Charging options at the mains and in the car *
- CAT IV 600 V measurement category and IP54 protection rating
- Compatible with CertSuite Asset
The MIT400/2 series of insulation resistance testers offer the user a wide range of applications. They are particularly suitable for energy providers who need to find faults in particularly difficult-to-access locations such as cable ducts, wind turbines or control cabinets. However, they are also ideal for use in engine testing, the automotive industry and in aerospace.
MEGGER 1004-739 - MIT420/2 insulation resistance tester
1062.16 EUR
MIT420/2 CAT IV insulation resistance tester- Ideal for energy providers
- Insulation measurement up to 1 kV/200 GO
- Stabilised insulation test voltage
- Faster single-range continuity testing 0.01 O to 1 MO
- Test voltage continuously adjustable from 10 V to 1000 V *
- 600 V TRMS AC and DC voltage measurement
- Test result memory and Bluetooth® *
- Detects and protects against live circuit
- Charging options at the mains and in the car *
- CAT IV 600 V measurement category and IP54 protection rating
- Compatible with CertSuite Asset
The MIT400/2 series of insulation resistance testers offer the user a wide range of applications. They are particularly suitable for energy providers who need to find faults in particularly difficult-to-access locations such as cable ducts, wind turbines or control cabinets. However, they are also ideal for use in engine testing, the automotive industry and in aerospace.
PCE INSTRUMENTS PCE IT 200 - PCE-IT 200 insulation tester
201.12 EUR
PCE Instruments PCE-IT 200 insulation tester- Measurement functions: HOLD, PI (polarisation index), DAR (absorption ratio)
- Automatic detection of AC and DC
- Automatic discharge
- High voltage indicator
- Alarm when limit is exceeded
- Overload: AC 720 V/10 seconds
- Powered by 6 x 1.5 V AA batteries
- External 9V DC power supply possible
Product benefits:
Our compact insulation tester is perfect for measuring the insulation resistance of electrical devices and household appliances. With its ability to measure insulation resistance, AC voltage, low resistance, PI (polarisation index) and DAR (dielectric absorption), it is a versatile and reliable tool for many application scenarios. With test voltages of 100 V, 250 V, 500 V and 1000 V, insulation resistances of up to 5.5 GOhm can be measured, allowing for accurate analysis and evaluation of insulation quality. The insulation tester not only provides the ability to measure DC voltage (DC) in the measuring range from 30 V to 600 V and AC voltage (AC), but also detects resistance in the range from 0 ohms to 999 ohms with high accuracy to ensure a good diagnosis of electrical systems.
FLUKE T5-600 - Electrical tester with fixed prong 600V
274.04 EUR
Tester for voltage, continuity and power. The fixed prong allows the power test, without interrupting the circuit.The test leads can be stored practically behind the device.
• Automatic measurement of AC and DC voltages
• Display resistances of up to 1000 ohm
• AC and DC voltage measurement up to 600 V
• AC measurement up to 100A
• Audible continuity test
• Automatic shut-off
• VDE-tested
• Measurement category: 600V CAT III
• Includes test leads, batteries, user manual
FLUKE T5-1000 - Electrical tester with fixed prong 1000V
298.12 EUR
Tester for voltage, continuity and power. The fixed prong allows the power test, without interrupting the circuit.The test leads can be stored practically behind the device.
• Automatic measurement of AC and DC voltages
• Display resistances of up to 1000 ohm
• AC and DC voltage measurement up to 1000 V
• AC measurement up to 100A
• Audible continuity test
• Automatic shut-off
• VDE-tested
• Measurement category: 1000V CAT III, 600V CAT IV
• Includes test leads, batteries, user manual
FLUKE 1AC E1 II - Fluke 1AC-II VoltAlert
58.12 EUR
The pocket-sized voltage testerThe next generation of the non-contact voltage tester, Fluke VoltAlert™ AC, is easy to use - you simply touch a terminal strip, a socket or a power cord with the measuring tip. If the tip is red and the unit beeps, there is voltage present. Electricians, maintenance and security personnel, but also homeowners can quickly check whether a circuit has voltage at work or at home.
• VoltBeat™ technology and the continuous self-test function mean you can rest assured that the device is functioning
• If a voltage is detected, the measuring tip lights up red and the device beeps.
• CAT IV 1000 V for additional protection
• Extended measuring range: 200 V to 1000 V AC voltage
BENNING IT 100 - IT 100 isolation tester
442.98 EUR
BENNING IT 100 multifunctional isolation testerFor precise and safe measurements in trade, industrial and service applications. The BENNING IT 100 insulation resistance and low-resistance meter is ideal for detecting isolation faults or earthing breaks.
Measuring functions
- Low-impedance resistance of protective earth and equipotential bonding conductor connections (test current: 200 mA)
- Isolation resistance with test voltages of 50 V, 100 V, 250 V, 500 V and 1000 V
- Resistance measurement with 200-mA test current for testing protective conductor connections with test lead zero calibration
- Continuity test has a beep sound
- Voltage measurement
- Determining the polarisation index (PI) and the degree of absorption (DAR)
Features
- A host of measurement functions combined in one device
- Test and external voltage displayed via red LED
- Test function for testing the internal fuse
- Independent prevention of the test in event of countervoltage
- Compact, practical housing design
- Rubber protective frame for rough, industrial use
- Large LC backlit display
Technical data
- Display: 9999 digits (illuminated)
- Insulation resistance: 300 kOhm - 20 GOhm
- Low-impedance resistance: 0.01 Ohm - 60 Ohm
- Resistance: 0.1 Ohm - 40 kOhm
- Voltage: 0.1 V - 600 VAC/DC
- Continuity test: acoustic/optical 600 ohms
- Additional function: polarisation index (PI), absorption level (DAR), automatic discharge function, zero configuration of test leads, integrated fuse test, test interlock in event of countervoltage
- Measurement method: RMS
- Measurement category: CAT IV 600 V
FLUKE 1664 FC - Fluke 1664 FC Multifunction Installation Tester
2267.36 EUR
The 1664 FC puts more power in your hands by quickly and efficiently testing to all local regulations, protecting appliances that may be inadvertently connected to the system under test, and making it easy to share test results over your smartphone.- Autotest to test line/loop impedance, RCD trip current / trip time, insulation tests with a single connection and the press of a single button
- Additional high current loop mode. Faster measurements compared to loop tests with non-trip mode for RCDs
- Z-max memory for loop tests – easy evaluation of the highest loop test value
- Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation
- Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections
- measure RCD trip current & trip time in parallel (RCD type AC and A)
- Two measurements at once and a dual display. PEFC or PSC and loop impedance are measured and displayed in parallel, saving you time
- Ring testing – select the required input sockets with soft keys – no need to exchange test leads
- Automatic test start for Loop & RCD tests – as soon as mains voltage is stable it starts testing
- Earth Volt Touchpad detects raised earth voltages >50 V, indicating potential dangerous situations
- supplied with the safety designed SureGrip™ test leads and clips which gives the user a comfortable, reliable grip and consistent results
- rotary dial knob indicates clearly which function is selected, all in one spot with no complex multi-level menus
- large display with backlight, clear symbols and with exceptionally wide viewing angle for easy and safe readings
- PASS/FAIL indication for RCD test results
- variable RCD current mode for customized settings
- Loop & line resistance with mOhm resolution
- test smooth dc sensitive RCDs (Type B)
- extended memory with 3 layers
- use continuity test currents to measure motor windings
- Withstands a drop of 1 meter
- Compact, lightweight (less than 1.3 kg) and padded neck-strap to free your hands for all day testing
Delivery Content:
Fluke 1664 FC Multifunction Installation Tester, 6x AA (IEC LR6) cell batteries, C1600 hard carrying case, Zero adapter, Heavy duty mains cord, STD standard test lead set, Padded carrying and waist strap, Quick reference guide, TP165X remote control probe and lead, User's manual on CD-ROM
FLUKE 1587 FC - Fluke 1587 FC insulation multimeter
1197.06 EUR
The Fluke 1587 insulation multimeter combines a digital insulation measuring instrument with a fully equipped, true-RMS digital multimeter in a single, portable device, which provides maximum versatility for both troubleshooting and preventative maintenance.The Fluke Connect® app provides the Fluke 1587 FC insulation multimeter with four powerful new diagnostic functions:
- PI/DAR timed ratio tests with TrendIt™ graphs identify moisture and contaminated insulation problems faster
- Fluke Connect memory storage means there is no need to write down results, thereby reducing errors and allowing you to track data over time
- Temperature compensation via the app contributes to establishing accurate output values and allows you to compare previous data
- Fault detection and real-time decisions in the field with Fluke Connect® Assets (available separately) thanks to comparisons of previous data and trend display
Functions and features:
- PI/DAR measurements plus TrendIt™ graphs
- Storage via the Fluke Connect app
- Temperature compensation via the Fluke Connect app
- Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V
- Insulation test: 0.01 MO to 2.0 GO
- Automatic discharge of capacitive voltages
- Signal smoothing for insulation tests
- Detection of live circuits prevents insulation tests at voltages over 30 V and thus increases the protection of the user
- VFD low-pass filter for accurate motor drive measurements
- Automatic discharge of capacitive voltages for higher protection for the user
- AC/DC voltage, mV DC voltage, mA DC/AC, resistance (O), continuity
- Capacity, diode test, temperature, min./max., frequency (Hz)
- Automatic shut-off to save battery power
- Overvoltage category CAT III, 1000 V, CAT IV, 600 V
- Large display with backlighting
- Robust hard carrying case for transporting any tools and aids you need
- Accessories included: probe with release button, test leads and test probes, crocodile clips, type K thermocouple
- TPAK Magnetic Meter Hanger for convenient hands-free operation
HIOKI IR4057-50 - Insulation tester IR4057-50, up to 1000 V, 4000 MOhm
595.18 EUR
Insulation tester IR4057-50Quick-response comparator with stable readings in high-speed digital format
Hioki insulation testers or megohmmeters feature all-in-one designs with rugged, integrated housings and measuring lead storage compartments. The IR4057-50 is a digital insulation resistance meter with 5 measuring ranges from 50 V to 1000 V and bar graph. It provides efficient functions and features to help shorten work time associated with field insulation testing.
Key features
- Easily transfer measurement data to your smartphone or tablet using our free GENNECT CROSS app or to an Excel® file. (Wireless adapter Z3210 required)
- 5-range test voltage from 50 V/100 MO to 1000 V/4000 MO
- Digital bar graph
- Stable and high-speed digital readings, 0.3 seconds response time for PASS/FAIL decisions
- Drop-proof onto concrete from 1 m (3.28 feet)
- Bright LED, illuminated LCD display, measuring lead with bright LED lamp for illumination near the hand (option L9788-11 or L9788-10)
- Continuity test via 200 mA test
- Built-in AC/DC voltage meter, useful for testing solar power systems and electric vehicles
FLUKE 1577 - Fluke 1577 Insulation Multimeter
1019.27 EUR
The Fluke 1577 Insulation Multimeter combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.Whether you work on motors, generators, cables, or switch gear, the Fluke 1577 Insulation Multimeter is ideally suited to help you with your tasks and at a cost that is far less than buying the two products.
- Insulation test voltages 500 V, 1000 V
- Insulation test: 0.1 MOhm to 600 MOhm
- Auto discharge of capacitive voltage
- AC/DC Voltage
- DC millivolts
- AC/DC milliamps
- Resistance (0.1 O to 50 MOhm)
- Continuity
- Three-year warranty
- Remote probe, test leads, alligator clips
- Rugged, utility hard case
- Auto power off to save battery power
- True RMS
- Large display with backlight
- Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
- CAT III 1000V, CAT IV 600V measurement category
- Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work
HIOKI IR4056-20 - Insulation tester with comparator, up to 1000 V
314.99 EUR
Hioki insulation testers or megohmmeters feature all-in-one designs including built-in rugged cases and test lead storage compartments.The IR4056 is a 5-range, 50 V to 1000 V digital insulation resistance tester with efficient functions and features to help shorten work time associated with field insulation testing.
Key Features:
- 5-range testing voltage of 50 V/100 MOhm to 1000 V/4000 MOhm
- Stable & medium-speed digital readings, 0.8 second response time of PASS/ FAIL decisions
- Drop proof onto concrete from 1m (3.28 feet)
- Bright LED, luminous LCD, test lead with bright LED lamp to illuminate near hand (Also available in the IR4056-21)
- Continuity check via 200 mA testing
- Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles
- CAT III 600 V
FLUKE 9040 - Rotation indicator for three-phase supply
347.12 EUR
Phase rotation indicator with high dielectric strength for industrial applications.This new Fluke tester is ideal for determining phase rotation direction in all areas, in which three-phase power supplies are used to supply motors, drives and electrical systems. The device displays on an LCD display the three phases and the phase rotation direction in order to determine whether the connections are correct. It allows you to quickly determine the rotary field direction and has a voltage (up to 700 V) and frequency range, which is suitable for both commercial and industrial applications. The supplied test probes have a variable clamping range, providing a secure contact for industrial power sockets.
• 3-phase display
• Display of phase rotary direction
• Clear LCD display
• No batteries required
Technical data:
Voltage range: 40 - 700 V
Frequency range: 15 - 400 Hz
Dust- and waterproof: IP 40
Electrical safety: EN 61010, EN 61557-7
Over-voltage category: CAT III 600 V, CAT IV 300 V
Dimensions: 124 x 61 x 27 mm
Weight: 200 g
Power supply: tested unit
Included with delivery:
Rotation direction tester for three-phase supply
3 self-retaining test probes (black)
Crocodile clip
User manual
HIOKI IR4053-10 - Insulation tester IR4053-10, with PV function, up to 1 kV
595.18 EUR
Insulation tester IR4053- Measure PV insulation resistance safely, accurately and quickly
The Hioki IR4053 is a digital insulation resistance meter for photovoltaic generation systems. Measure the insulation resistance accurately and safely without being affected by the generated solar energy and determine the value in just 4 seconds.
Main features
- Safe and accurate measurement of PV insulation resistance even when generating solar power
- Built-in PV-specific function, display measurements in 4 seconds
- Five integrated measuring ranges (50/125/250/500/1000 V) for normal insulation resistance measurements
- Built-in 1000 VDC voltage measurement for open-circuit voltage testing of PV systems that support 1000 V
- Built-in comparator function
- Drop-proof design withstands drops onto concrete from a height of 1 m
Measurement is not affected by PV generation
The IR4053, designed for PV, can accurately measure the insulation resistance without being affected by the generated PV.
CHAUVIN ARNOUX CHAU P01140838 - C.A 6528 insulation measuring instrument, 250/500/1000 V, up to
538.08 EUR
The CA 6528 insulation tester is suitable for maintenance and repair work on electrical equipment such as motors, cables etc. With the ''hands-free'' transport bag, the CA 6528 enables unrestricted on-site working. The shock-absorbing cover with stand ensures stability when the tester is set up.The large LCD display simultaneously displays the insulation value and the actual test voltage, thanks to its dual display. The illuminated display ensures perfect readability in all situations.
The CA 6528 megohmmeter performs resistance, insulation and continuity measurements in accordance with the applicable international standards: IEC 60364, NF C 15-100, VDE 100 etc. The continuity test is performed with test lead compensation. Insulation measurements are possible in manual, locked and timer mode. An indicator indicates the battery charge level when measuring the voltage.
Technical data
- Voltage: 0 to 700 VAC/DC
- Insulation test: up to 11 GOhm
- Continuity test: 0.02 ohms to 40 ohm
- Resistance: 1 Ohm to 420 kOhm
- Automatically detects when a voltage is present
- Complies with IEC 61557-1-2-4-10
- Electrical safety: IEC 61010-1, 61010-2-030, 61010-2-034 - 600V CAT IV
- IP 40
CHAUVIN ARNOUX CHAU P01140824 - Isolation tester C.A 6524, up to 200 GOhm, up to 1 kV
793.74 EUR
Thanks to its compact and lightweight design, the C.A 6524 insulation tester is easy to use and offers users great ease of use.Ergonomics:
The housing corresponds to the measurement category 600 V CAT IV and has the protection class IP54 / IK04. It fits well in the hand, provides optimum safety and the TEST button is easy to use, even with insulated gloves. With the magnetic folding support, the device can be easily mounted on steel surfaces, so the user has both hands free for the measurement and can easily read the result. The large illuminated double digital display and the logarithmic bar graph show the user not only the measured value, but also the actual test voltage, the test current and the timer for the test duration on a secondary display. The remote control probe has a light to illuminate the point of measurement, allowing it to work in dark environments.
insulation test:
The new series offers a wide range of test voltages for insulation testing from 10 V to 1 kV. The measurement range for insulation resistors extends up to 200 GOhm and thus exceeds the IEC standard 61557, which requires only 2 GOhms. In addition to the manual test, other test methods are provided, such as the locked test (Lock) or with a specified test duration (timer), as well as the determination of the PI and DAR values ??for the evaluation of the insulation quality.
continuity test:
The continuity test is carried out in accordance with IEC 61557 standard with a test current of 200 mA, but can be made with only 20 mA in some models, whereby the batteries last longer if used frequently. The continuity test has an active protection circuit that detects existing voltages and shuts down the function, eliminating the need for fuses. The device also works as a digital multimeter with the measurement of voltages up to 700 V, frequencies up to 800 Hz, resistors up to 999 kOhm and capacities up to 10 µF.
Specifications:
- Isolation: Test Voltage 50-100-250-500-1000 V
- Measuring range: 200 GW
- Inspection types: manual, locked and with timer, PI, DAR determination
- Continuity check: test currents 200 mA / 20 mA
- Voltage measurement: up to 700 V
- Frequency measurement: 15.3 - 800 Hz
- Resistance measurement: 0 - 1000 kW
- Double display + logarithmic bargraph
- Storage: 300 readings
- Magnetic mount
- Alerts
- Powered by 6 batteries LR6 / AA
- Dimensions: 211 x 108 x 60 mm
- Weight: 850 g
- IP54 protected
- Measurement category: 600 V CAT IV
FLUKE 6500-2 - Test device for appliances and equipment
2331.96 EUR
Appliance tester for DIN VDE 0701-0702 and ÖVE/ÖNORM E8701 / HG701 The Fluke-6500-2 appliance tester ensures the electrical safety and functionality of portable appliances in accordance with relevant directives and regulations. Thanks to powerful self-test functions and simple control, more tests can be carried out per day without compromising the results.
• German on-screen text
• Compact and lightweight - for efficient work and easy carrying
• One-button operation - preset and user-definable test routines can be called up with a single keystroke, allowing you to perform tests faster in the field, saving you time
• Work more efficiently - quick data entry via a QWERTY keyboard (or optional Fluke barcode scanner) and fast data transfer via USB flash drive
• NEW Color dot matrix display: better visibility and viewing angle
• NEW 250V insulation test: possibility to perform 250V insulation tests
• NEW 110V test function: Optional 110V test function for testing devices on construction sites
• NEW RCD test: Possibility to test devices that are protected with RCDs
Measurement functions and features:
• LN Mains voltage
• Display for limit value exceedance
• Compensation of the test lead for protective conductor resistance measurement
• PE protective conductor resistance (200 mA)
• PE protective conductor resistance 10 A (DE)
• Insulation 500 V dc
• Insulation 250 V dc
• Protective conductor current
• Touch current
• RCD test
• Equivalent leakage current
• Device power kVA
• Appliance load current
• Color dot matrix display
• Backlight
• USB connection, printer connection
• USB flash drive connection / download
• External printer output
• QWERTY keyboard
• Testing of cold device and extension cables
• Self-test
• Programmable values for good/bad test
• Data memory
• Polarity control
• Graphical help menu online
• Program mode
• Real time clock
• Result management
• 230 V test connection/230 V mains input plug
• 110 V appliance test compatible with adapter
Scope of delivery:
Fluke 6500-2 portable appliance tester, user manual on CD, quick start guide, hard plastic carrying case, test lead, test probe, alligator clip, power cord, USB flash drive, USB cable
FLUKE 6200-2 - Test device for appliances and equipment
1428.02 EUR
The Fluke 6200-2 appliance tester is characterised by its light weight, small size, single button operation and improved automatic test. It allows you to increase the number of tests per day carried out on portable equipment. With the 6200-2 appliance tester measurements can be taken more quickly, without posing a risk to your security or that of your customers.• Single button operation: Each test function is started by pressing a particular button
• Preset values for good/bad help save time
• Large backlit display for easy viewing
• Single network outlet for device connection
• Separate IEC outlet for easy checking of power cords
• Removable measuring leads for quick on-site replacement
• Built-in carrying handle
• USB port for data transfer
Technical data:
Power-on testing: 90 V to 264 V/± 2% + 3 digits
Earth testing (R pe): 0 to 19.99 Ohms/0.01 Ohms
Insulation test (R iso): 0 to 299 MOhm/±5% + 2 digits
Measurement of touch current (IB): 0 to 1.99 mA AC/± 4% + 2 digits
Measurement of substitute leakage current (IEA): 0 to 19.99 mA AC/±2.5% + 3 digits
Load/differential current measurement: Load current: 0 A to 16 A/± 4% + 2 digits
Load/differential current measurement: Power: 0.0 VA to 3.7 kVA/ ±5% + 3 digits
Load/differential current measurement: Protective conductor current: 0 to 19.99 mA/± 4% + 4 digits
PELV test: ± 2% + 3 digits
Security specifications: Complies with EN61010-1 third edition, CAT II, 300 V, pollution degree 2, DIN VDE0404-1 and DIN VDE0404-2, DIN VDE 0413/EN 61557 parts 1, 2, 4, 6, 10
Dimensions: 200 mm (L) x 275 mm (W) x 114 mm (H)
Weight: 3.13 kg
Power supply: 230 V +10% -15%, 50 Hz ±2
Included with delivery:
Fluke 6200-2 portable appliance tester, user guide on CD, quick start guide, hard plastic carrying case, measuring lead, test probe, crocodile clip, mains cable
FLUKE 1662 - Fluke 1662 Multifunction Installation Tester
1057.41 EUR
The Fluke 1662 gives you Fluke reliability, simple operation and all the testing power you need for day-in, day-out installation testing.Measurement functions
Measurement function
Voltage & frequency
Wiring polarity checker, detects broken N wires
Insulation resistance
Continuity & resistance
Measure motor windings with continuity test
Loop & line resistance
Prospective earth fault current (PEFC/IK)
Prospective short-circuit current (PSC/IK)
RCD switching time
RCD tripping level (ramp test)
Measures trip time & current for RCD type A & AC in one test
RCD variable current
Automatic RCD test sequence
Phase sequence indicator
On/Off switchable auto-start for RCD & Looptest
Self-test
Illuminated display
Time and date (when used with optional FlukeView software)
Included accessories
Installation Tester, Heavy duty, single input line cord, Hard case, Remote control probe, Zero adapter
GOOBAY GB 77113 - 8-piece screwdriver set, insulated with magnetic tips
24.41 EUR
Insulated screwdriver set 8-piece with phase tester - VDE up to 1000 V, magnetic The 8-piece insulated screwdriver set offers you everything you need for safe electrical installations. With VDE-tested protective insulation and durable tool steel, this electrician's tool set is ideal for everyday use - both in the professional sector and in the home.
All the details at a glance:
- \t8-piece insulated screwdriver set including phase tester
- \tSuitable for work up to 1000 V AC (VDE protective insulation)
- \tScrewdriver with ergonomic handle for maximum power transmission
- \tHexagonal handle prevents rolling on work surfaces
- \tMagnetic tips for easy picking up and fixing of screws
- \tMade from hardened tool steel for high durability and impact resistance
- \tProtective insulation over handle and blade for safe working on electrical components
- \tIdeal for electrical installation, assembly work and repairs
- \tIncludes phase tester (100 - 250 V) for voltage testing
Contents of the set:
- \t3x Phillips screwdrivers (PH0 x 75 mm, PH1 x 100 mm, PH2 x 100 mm)
- \t4x slotted screwdrivers (3 x 75 mm, 4 x 100 mm, 5.5 x 125 mm, 6.5 x 150 mm)
- \t1x phase tester (140 mm, 100 - 250 V)
MEGGER 1010-013 - Magnetic strap for MIT400 series
39.91 EUR
Megger 1010-013 magnetic strap for the MIT400 seriesThe Megger 1010-013 magnetic strap is intended for use with the MIT400/2 series of CAT IV insulation testers. The strap is attached to the tester's body to enable hands-free operation.
HIOKI L9788-10 - Measuring lead with trigger button, 120 cm
91.5 EUR
Measuring lead with trigger button, 120 cm length, for HIOKI insulation tester IR405x
HIOKI L9788-11 - Measuring lead set, Hioki L9788-11
103.49 EUR
Measuring lead set with trigger button, 120 cm length, earth lead cable interchangeable with crocodile clip, for HIOKI insulation tester IR405x