EXSYS EX-6030 - Ethernet LAN adapter to RS-232
92.59 EUR
Consult the informative sheet with in-depth details, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; falls into the CATEGORY NAME; the product is marketed by SELLER NAME and produced by MANUFACTURER NAME.
Ethernet to 1 x serial RS-232, metal housing
• Interface RS-232 V.24
• Data bits: 7, 8
• Parity: none, even, odd
• RS-232 signals: TxD, RxD, GND (looped RTS, CTS, DTR, DSR, DCD)
• Ethernet protocol: IP, TCP, DHCP
The EX-6030 in the metal housing makes it possible to easily connect your serial devices over the
network (Ethernet). You are therefore no longer
limited to a specified distance but can control every RS-232 peripheral
over the network. You can easily integrate the EX-6030 into the network
with an IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping).
The supplied and other virtual COM port software can also be used for control
purposes. The COM ports are then entered in the Device Manager. The
EX-6030 can be screwed directly onto the wall or installed in
a 48 cm (19'') rack with the DIN rail kit.
• Chip set: Samsung S3C4510B
• Data transfer rate: serial: 50 baud to 115.2 kbaud/Ethernet: 10/100 Mbps
• Connections:
- 1 x 9-pin D-SUB serial connector
- 1 x RJ-45 Ethernet
- 1 x DC power supply connection
• Hardware systems:
- Ethernet 10/100 Mbps
• Drivers:
-Win NT 4.0/2000/XP(32&64-bit)/Vista(32&64-bit)/Server 2003(32&64-bit)/Server 2008(32&64-bit)
Win7(32&64-bit) via virtual COM port software
• Operating systems:
- All via IP and port number (direct access socket port)
• Operating temperature: 0° to 55° Celsius
• Storage temperature: -40° to 75° Celsius
• Relative humidity: 5% to 95%
• Power supply: 5 volts/2.0 amps via the supplied DC power supply unit
• Dimensions: 60 x 40 x 20 mm
• Weight: 400 g
• Included with delivery:
- EX-6030, power supply unit, DIN rail kit, driver CD, manual
EAN: 4718359060304
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Ethernet to 1 x serial RS-232, metal housing
• Interface RS-232 V.24
• Data bits: 7, 8
• Parity: none, even, odd
• RS-232 signals: TxD, RxD, GND (looped RTS, CTS, DTR, DSR, DCD)
• Ethernet protocol: IP, TCP, DHCP
The EX-6030 in the metal housing makes it possible to easily connect your serial devices over the
network (Ethernet). You are therefore no longer
limited to a specified distance but can control every RS-232 peripheral
over the network. You can easily integrate the EX-6030 into the network
with an IP address (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP ping).
The supplied and other virtual COM port software can also be used for control
purposes. The COM ports are then entered in the Device Manager. The
EX-6030 can be screwed directly onto the wall or installed in
a 48 cm (19'') rack with the DIN rail kit.
• Chip set: Samsung S3C4510B
• Data transfer rate: serial: 50 baud to 115.2 kbaud/Ethernet: 10/100 Mbps
• Connections:
- 1 x 9-pin D-SUB serial connector
- 1 x RJ-45 Ethernet
- 1 x DC power supply connection
• Hardware systems:
- Ethernet 10/100 Mbps
• Drivers:
-Win NT 4.0/2000/XP(32&64-bit)/Vista(32&64-bit)/Server 2003(32&64-bit)/Server 2008(32&64-bit)
Win7(32&64-bit) via virtual COM port software
• Operating systems:
- All via IP and port number (direct access socket port)
• Operating temperature: 0° to 55° Celsius
• Storage temperature: -40° to 75° Celsius
• Relative humidity: 5% to 95%
• Power supply: 5 volts/2.0 amps via the supplied DC power supply unit
• Dimensions: 60 x 40 x 20 mm
• Weight: 400 g
• Included with delivery:
- EX-6030, power supply unit, DIN rail kit, driver CD, manual
EAN: 4718359060304
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
EXSYS EX-45362 - EXSYS PCIe card 2S serial RS-232/422/485
99.82 EUR
2S PCIe Serial RS-232/422/485 Board incl. LP bracket and Octopus cableThe EX-45362 PCIe I/O-adapter provides two high performance 16C550-type UART compatible RS-232, 422 and 485 serial ports. Each port you can select independent RS-232, 422 or 485. It is designed for PC, thin client or server to provide instant COM port expansion via the PCIe Bus. The card is fully PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. The EX-45362 support RS-485 Auto Transmitter turn around by unique feature ATTATM hardware. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System). With the board it’s included a Low Profile bracket for small com-puter case.
- Interface: 2 x RS-232 V.24, RS-422/485 - independent mode selection
- ±15kV IEC1000-4-2 ESD Schutz for RS232 I/O's
- FIFO Buffer: 16C550 with 128Byte
- Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signal: RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Signal: RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
- Support ATTATM Auto Transmitter
- Termination RS-422/485: 120 ohm, can enable or disable
- Support PCIe slot version 1.0 to 3.0
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
EXSYS EX-41384 - EXSYS PCI Card 4S Serial RS-232 + Cable, bracket
133.93 EUR
PCI 4S Serial RS232 Card incl. LP bracket (SystemBase Chip set)The EX-41384 PCI I/O card provides four serial RS232 High Performance UART 16C1050 outputs. It has been developed to expand four additional serial ports for PC, small workstation or server via the PCI or PCI-X bus. The board is fully plug-and-play compatible and supports Linux and SCO-Unix. The EX-41384 can also be installed in a low profile computer case with a maximum height of 8cm. In addition, +5V or +12V can be configured on pin 9 of the serial connector for a POS system (Power over System).
- Interface: RS232 V.24
- FIFO Buffer: 16C1050 with 256Byte
- ±15kV IEC1000-4-2 ESD protection for RS232 I/OS
- I/O addresses and interrupt are assigned by the system BIOS, IRQ Sharing
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Flow Control RTS/CTS, XON/XOFF
- Supports 5V and 3.3V boards
- +5V or +12V can be set to pin 9 of all four connectors
Drivers: See Operating Systems
Operating system: Win 2000/XP/Vista/7/8.x/10 (32&64) Server 200x, SCO-Unix, Linux 2.4 or higher
Scope of delivery: EX-41384, Octopus cable, LP bracket, CD, manual
EXSYS EX-42378 - PCI card for 8x serial RS-232/422/485
226.96 EUR
- Interface: 8 x RS-232 V.24, RS-422/485
- FIFO buffer: 16C1050 with 128 bytes
- I/O addresses and interrupt: assigned by the system BIOS, IRQ sharing
- Data bits: 5, 6, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Signals RS-422 - 4 wire (TXD+/-, RXD+/-) (full duplex)
- RS-485 - 4 wire (TXD+/-, RXD+/-) (full duplex)
- RS-485: two-wire - Data+, Data- and GND
- Supports ATTATM Auto Transmitter
- Terminal: 120 ohms, can be switched on or off
- Supports 5V and 3.3 V main boards
- Chip set: Asmedia SB16C1054PCI
The EX-42378 PCI I/O card provides four serial RS-232 high-performance UART 16C1050 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI Express bus. The card is fully PCI or PCI-X Plug-and-Play compatible and has no problems with IRQ and I/O address conflicts. It supports the ATATM Auto RS-485 Transmitter features. In addition, +5 V or +12 V can be configured on pin 9 of the connector for a POS system (power over system).
EXSYS EX-13101 - USB 2.0 converter board, USB-A to RS-232
29.49 EUR
The EX-13101 USB to RS232 UART converter board consists of a board with a fixed USB connector and an FT232RL FTDI chip that processes all USB signals and protocols. It is ideal for testing purposes or for creating USB to serial cables according to your own criteria.- Interface RS-232 V.24
- FIFO buffer with 265 bytes (receive) and 128 bytes (transmit)
- Data bits: 7 and 8
- Stop bits: 1 and 2
- Parity: none, even, odd, space and mark
- RS-232 signals: TxD, RxD, RTS, CTS, DCD, GND
- Power supply from the USB bus (bus power)
- Extended temperature range: -40°C to 85°C
- Chip set: FTDI
EXSYS EX-44064 - EXSYS PCIe Card 4S Serial RS-232, Chip set
113.26 EUR
4S PCIe Serial RS-232 Card (SystemBase Chip set)The EX-44064 PCI-Express I/O card provides four RS-232 High Performance Serial UART 16C1050 outputs. It has been developed to expand four additional serial ports for PC, small workstation or server via the PCI Express bus. The card is fully PCI-Express plug-and-play compatible and has no problems with IRQ and I/O address conflicts. In addition, +5V or +12V can be configured on pin 9 of the serial connector for a POS system (Power over System).
- Interface: RS-232 V.24 with FIFO Buffer 16C1050 with 256Byte
- ±15kV IEC1000-4-2 ESD protection for RS232 I/OS
- I/O addresses and interrupt are assigned by the operating system, IRQ sharing
- PCIe interface compatible with 1.0a to 3.0 specifications
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Supports +5V or+12V on pin 9 of the serial connectors
- Chip set: SystemBase SB16C1054PCI
Drivers: Win 2000/XP/Vista/7/8.x/10 (32&64) Sever 200x & 20xx, SCO-Unix, Linux 2.4 or higher
Operating System: According To Driver
Scope of delivery: EX-44064, 1 x slot adapter with 2 x 9 pin serial, driver CD, manual
EXSYS EX-44083 - PCI Express card for 1x 9-pin, 1x 25-pin RS-232
64.68 EUR
- RS-232, V.24 interface
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- FIFO buffer: 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- PCIe interface compatible with 1.0a to 3.0 specifications
- 5, 6, 7, and 8 data bits
- 1, 1.5, and 2 stop bits
- Parity: none, even, odd, space and mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Supports +5V or +12V on pin 9 of all serial plugs
- Chip set: ASIX AZ99100
The EX-44083 PCI Express I/O card provides two serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI Express bus.
The card is fully plug-and-play compatible. In addition, +5 V or +12 V can be configured on pin 9 of the serial connector for a POS system (power over system). With the EX-44082, two low profile brackets are supplied for installation in narrow computer housings up to 8 cm height.
EXSYS EX-41388 - 8 port RS 232, serial, PCI card 16C1050
164.94 EUR
The EX-41388 PCI I/O card provides eight serial RS232 High Performance UART 16C1050 outputs. It has been developed to expand four additional serial ports for PCs, small workstations or servers via the PCI or PCI-X bus. The board is fully plug-and-play compatible and supports Linux and SCO-Unix. The EX-41388 can also be installed in a low profile computer case with a maximum height of 8cm.- Interface: 8 x RS232 V.24
- FIFO Buffer: 16C1050 with 256Byte
- ±15kV IEC1000-4-2 ESD protection for RS232 I/OS
- I/O addresses and interrupt are assigned by the system BIOS
- Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Flow Control RTS/CTS, XON/XOFF
- Supports 5V and 3.3V mainboards
Specifications:
- Chip set: SystemBase 16C1054PCI
- Data transfer rate: 300Baude to 921.6KB
- Connections: 8x 9 pin serial plug (Octopus cable), 1 x 4 pin floppy plug
- Hardware systems: PCI and PCI-X slot 32-bit
- Operating systems: Win9.x/me/2000/XP/Vista/7/8/32 (64&200x), Server 2012 R2 &, SCO-Unix, Linux
- Operating temperature: 0 °C to 55 °C.
- Storage temperature: -40 °C to 75 °C.
- Relative humidity: 5% to 95%
- Dimensions: 120 x 61 mm
- Weight: 800g
- Scope of delivery: EX-41388, Octopus cable, LP Bugel, CD, manual
EXSYS EX-44388 - EXSYS PCIe Card 8S Serial RS-232 + Cable, bracket
235.23 EUR
8S PCIe serial RS-232 card incl. LP bracket (SystemBase Chip set)The EX-44388 PCI-Express I/O card provides eight serial RS-232 High Performance UART 16C1050 outputs. It has been developed to expand eight additional serial ports for PC, small workstation or server via the PCI Express bus. The card is fully PCI-Express plug-and-play compatible and has no problems with IRQ and I/O address conflicts. In addition, +5V or +12V can be configured on pin 9 of the serial connector for a POS system (Power over System). With the EX-44388 a low profile bracket is supplied so that the card can also be installed in a narrow PC housing.
- Interface: RS-232 V.24 with FIFO Buffer 16C1050 with 256Byte
- ±15kV IEC1000-4-2 ESD protection for RS232 I/OS
- I/O addresses and interrupt are assigned by the operating system, IRQ sharing
- PCIe interface compatible with 1.0a to 3.0 specifications
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Supports +5V or+12V on pin 9 of the serial connectors
- Chip set: SystemBase SB16C1058PCI
Drivers: See Operating Systems
Operating system: Win98, me, 2000/XP/Vista/7/8.x/10 (32&64) Sever 200x & 2012R2, SCO-Unix, Linux 2.4 or higher
Scope of delivery: EX-44388, Octopus cable, LP bracket, driver CD, manual
EXSYS EX-46014 - PCI Express card for 4x RS-232
48.09 EUR
- RS-232 V.24 interface
- FIFO buffer: 16C550 with 256 bytes
- I/O addresses and interrupt are assigned by the operating system
- PCIe interface compatible with 2.0 Gen 1 specifications
- Data bits: 5, 6, 7 and 8
- Stop bits: 1, 1.5 and 2
- Parity: none, even, odd, space and mark
- RS-232 signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Chip set: ASIX AX99100
- Includes: EX-46014, 4x low profile brackets, manual
The EX-46014 PCIe I/O card provides four serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial ports for a PC, small workstation or server via the PCIe bus. The four 9-pin connectors are mounted on two slot plates. Four low profile plates are supplied for narrow calculators.
- Category: serial cards
- Interface: RS-232
- Ports: 9-pin connector
- Number of ports: 4
- Bus system: PCIe
- Design: standard + low profile
EXSYS EX-46028 - PCI Express card for 8x RS-232, cable
144.27 EUR
- RS-232 V.24 interface
- FIFO buffer: 16C550 with 256 bytes
- I/O addresses and interrupt are assigned by the operating system
- PCIe interface compatible with 2.0 Gen 1 specifications
- Data bits: 5, 6, 7 and 8
- Stop bits: 1, 1.5 and 2
- Parity: none, even, odd, space and mark
- RS-232 signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Chip set: Exar/MaxLinear 17V358
- Includes: EX-46028, octopus cable, low profile bracket, manual
The EX-46028 PCIe I/O card provides eight serial RS-232 high-performance UART 16C550 outputs. It was developed to add eight additional serial ports for a PC, small workstation or server via the PCIe bus. The eight 9-pin connectors are connected via an octopus cable. This requires only the space of a slot plate. The EX-46028 comes with a low profile bracket for slim computer enclosures up to 8 cm in height.
- Category: serial cards
- Interface: RS-232
- Ports: 9-pin connector
- Number of ports: 8
- Bus system: PCIe
- Design: standard + low profile
EXSYS EX-45034IS - PCI Express card for 4x serial RS-232/422/485, opt. iso.
287.94 EUR
- Interface: RS-232 V.24/RS-422/RS-485
- 15-kV ESD over-voltage protection and 2.5-kV optical isolation
- ±15-kV IEC1000-4-2 ESD protection for RS232 I/Os
- FIFO buffer 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- Data bits: 7 and 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space and mark
- Supports ATTATM Auto Transmitter
- RS-422/485 termination - 120 ohms can be switched on or off
- Chip set: FTDI
Signals:
- RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 2 wire (Data+/-, Data+/-) half duplex
The EX-45034IS PCIe I/O card provides 4 serial RS-232, 422 and 485 high-performance UART 16C550 outputs with 15-KV ESD overvoltage protection and 2.5-kV optical isolation.
The card is fully plug-and-play compatible. It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port.
EXSYS EX-44062 - PCI Express card for 2x RS-232
69.85 EUR
- Interface: RS-232 V.24 with FIFO buffer 16C1050 with 256 bytes
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- I/O addresses and interrupt is assigned by the operating system, IRQ sharing
- PCIe interface compatible with 1.0a to 3.0 specifications
- Data bits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Supports +5V or +12V on pin 9 of the serial connector
- Chip set: Asmedia SB16C1053APCI
The EX-44062 PCI Express I/O card provides two serial RS-232 high-performance UART 16C1050 outputs. It was developed to add two additional serial outputs for a PC, small workstation or server via the PCI Express bus.
The card is fully PCI-Express Plug-and-Play compatible and has no problems with IRQ and I/O address conflicts. In addition, +5 V or +12 V can be configured on pin 9 of the serial connector for a POS system (power over system). With the EX-44062, two low profile brackets are supplied.
EXSYS EX-41054 - EXSYS PCIe card 4S serial RS-232 + cable
91.55 EUR
PCI 4S Serial RS-232 card with Octopus cable (MosChip chip-set)The EX-41054 PCI I/O adapter provides four high performance 16C550-type UART RS-232 serial ports. It is designed for PC, thin client or server to provide instant COM port expansion via the PCI- or PCI-X Bus. The card is fully Plug-and-Play compatible.
- Interface: RS-232 V.24
- FIFO Buffer: 16C550 with 16Byte
- ±15KV IEC1000-4-2 ESD Protection for RS232 I/O’s
- I/O addresses and Interrupt: Setting from the System BIOS with IRQ Sharing
- Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2 / Parity: none, even, odd, space, mark
- Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Support Mother-Board with 5V and 3.3V
- Windows WHQL certified
- Chip-Set: MosChip MCS9845CV
EXSYS EX-46024 - PCI Express card for 4x RS-232, cable
68.81 EUR
- RS-232 V.24 interface
- FIFO buffer: 16C550 with 256 bytes
- I/O addresses and interrupt are assigned by the operating system
- PCIe interface compatible with 2.0 Gen 1 specifications
- Data bits: 5, 6, 7 and 8
- Stop bits: 1, 1.5 and 2
- Parity: none, even, odd, space and mark
- RS-232 signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Chip set: ASIX AX99100
- Includes: EX-46024, octopus cable, low profile bracket, manual
The EX-46024 PCIe I/O card provides four serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial ports for a PC, small workstation or server via the PCIe bus. The four 9-pin connectors are connected via an octopus cable. This requires only the space of a slot plate. The EX-46024 comes with a low profile bracket for slim computer enclosures up to 8 cm in height.
- Category: serial cards
- Interface: RS-232
- Ports: 9-pin connector
- Number of ports: 4
- Bus system: PCIe
- Design: standard + low profile
EXSYS EX-45032IS - PCI Express card for 2x serial RS-232/422/485, opt. iso.
185.61 EUR
- Interface: RS-232 V.24/RS-422/RS-485
- 15-kV ESD over-voltage protection and 2.5-kV optical isolation
- ±15-kV IEC1000-4-2 ESD protection for RS232 I/Os
- FIFO buffer 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- Data bits: 7 and 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space and mark
- Supports ATTATM Auto Transmitter
- RS-422/485 termination - 120 ohms can be switched on or off
- Chip set: FTDI
Signals:
- RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 2 wire (Data+/-, Data+/-) half duplex
The EX-45032IS PCIe I/O card provides 2 serial RS-232, 422 and 485 high-performance UART 16C550 outputs with 15-kV ESD overvoltage protection and 2.5-kV optical isolation. It was developed to add 2o additional serial ports for PCs, small workstations or servers via the PCIe bus.
It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port. POS is not adjustable.
EXSYS EX-44384 - EXSYS PCIe Card 4S Serial RS-232 + Cable, bracket
142.2 EUR
4S PCIe serial RS-232 card incl. LP bracket (SystemBase Chip set)The EX-44384 PCI-Express I/O card provides four RS-232 High Performance Serial UART 16C1050 outputs. It has been developed to expand four additional serial ports for PC, small workstation or server via the PCI Express bus. The card is fully PCI-Express plug-and-play compatible and has no problems with IRQ and I/O address conflicts. In addition, +5V or +12V can be configured on pin 9 of the serial connector for a POS system (Power over System). With the EX-44384 a low profile bracket is supplied so that the card can also be installed in a narrow PC housing.
- Interface: RS-232 V.24 / FIFO Buffer: 16C1050 with 256Byte
- ±15kV IEC1000-4-2 ESD protection for RS232 I/OS
- I/O addresses and interrupt are assigned by the operating system, IRQ sharing
- PCIe interface compatible with 1.0a to 3.0 specifications
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports hardware and software flow control
- Supports +5V or+12V on pin 9 of the serial connectors
- Chip set: SystemBase SB16C1054PCI
EXSYS EX-45368 - PCI Express card for 8x RS-232/422/485
319.52 EUR
- Interface: 8x RS-232 V.24, RS-422/485 - independent mode selection
- FIFO buffer: 16C1050 with 256 bytes
- ±15-kV IEC1000-4-2 ESD protection for RS232 I/Os
- I/O addresses and interrupt: assigned by the system BIOS, IRQ sharing
- Data bits: 5, 6, 7, 8/stop bits: 1, 1.5, 2/parity: none, even, odd, space, mark
- Supports ATTA TM Auto Transmitter
- Supports PCIe slot versions 1.0 to 3.0
- RS-422/485 termination - 120 ohms can be switched on or off
- Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422/485 signals:
- - RS-422 - 4 wire (TXD+/-, RXD+/-) (full duplex)
- - RS-485 - 4 wire (TXD+/-, RXD+/-) (full duplex)
- - RS-485 - 2 wire (Data+/-, Data+/-) half duplex)
- Chip set: SystemBase SB16C1058PCI
The EX-45368 PCI I/O card provides 8 serial RS-232, 422 and 485 high-performance UART 16C1050 outputs. Each port can be set independently of the interface type. It was developed to add eight additional serial combo ports for PCs, small workstations or servers via the PCIe bus.
EXSYS EX-42032 - PCI card for 2x serial RS-232/422/485
86.39 EUR
- INTERFACE: RS-232 V.24 / RS-422 / RS-485
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- FIFO buffer: 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- Data bits: 5, 7, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space and mark
- Supports ATTATM Auto Transmitter
- Terminal: 120 ohms, can be switched on or off
- Signals:
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485: two-wire - Data+, Data- and GND
- Chip set: FTDI
The EX-42032 PCI Express I/O card provides two serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI or PCI-X bus. Can be configured +5 V and +12 V on pin 9 of the serial connector for a POS system (power over system). It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port.
EXSYS EX-44044-2 - PCI Express card to 4x RS-232
101.89 EUR
- Interface: RS-232 V.24
- FIFO buffer: 16C550 with 16 bytes
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- I/O addresses and interrupt is assigned by the operating system, IRQ sharing
- Data bits: 5, 6, 7, 8/stop bits: 1, 1.5, 2/parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- PCI Express interface compatible with 1.0a specification
- Chip set: Asmedia MCS9904CV
The EX-44044-2 PCI Express I/O card provides four serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI Express bus.
The card is fully PCI-Express Plug-and-Play compatible and has no problems with IRQ and I/O address conflicts. In addition, +5 V or +12 V can be configured on pin 9 of the serial connector for a POS system (power over system). With the EX-44044-2 a low profile bracket is supplied, for narrow computer housings up to 8 cm height.
EXSYS EX-45034 - PCI Express card to 4x serial RS-232/422/485
150.47 EUR
- Interface: RS-232 V.24/RS-422/RS-485
- ±15-kV IEC1000-4-2 ESD protection for RS232 I/Os
- FIFO buffer 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- Data bits: 7 and 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space and mark
- Supports ATTATM Auto Transmitter
- RS-422/485 termination - 120 ohms can be switched on or off
- Chip set: FTDI
Signals:
- RS-232 - TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 2 wire (Data+/-, Data+/-) half duplex
The EX-45034 PCI I/O card provides 4 serial RS-232, 422 and 485 high-performance UART 16C550 outputs. It was developed to add four additional serial ports for a PCs, small workstations or servers via the PCI or PCI-X bus. +5 V and +12 V can be configured on pin 9 of the serial connector for a POS system.
The card is fully plug-and-play compatible. It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port.
EXSYS EX-42034IS - PCI card to 4x serial RS-232/422/485, opt. ISO.
61.58 EUR
- INTERFACE: RS-232 V.24 / RS-422 / RS-485
- 15 kV ESD over-voltage protection and 4.0 kV optical isolation
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- FIFO buffer: 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- Data bits: 5, 7, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space and mark
- Supports ATTATM Auto Transmitter
- Terminal: 120 ohms, can be switched on or off
- Signals:
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485: two-wire - Data+, Data- and GND
- Chip set: FTDI
The EX-42034IS PCI I/O card provides four serial RS-232, 422 and 485 High Performance UART 16C550 outputs with 15KV ESD overvoltage protection and 2.5KV optical isolation. It was developed to add eight additional serial outputs for a PC, workstation or server via the PCI or PCI-X bus.
It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port. POS is not adjustable.
EXSYS EX-44081 - PCI Express card for 1x RS-232
57.49 EUR
- RS-232, V.24 interface
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- FIFO buffer: 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- PCIe interface compatible with 1.0a to 3.0 specifications
- 5, 6, 7, and 8 data bits
- 1, 1.5, and 2 stop bits
- Parity: none, even, odd, space and mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Supports +5V or +12V on pin 9 of all serial plugs
- Chip set: ASIX AZ99100
The PCI I/O card provides a serial RS-232 high-performance UART 16C550 output. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI Express bus. The card is fully plug-and-play compatible. In addition, +5 V or +12 V can be configured on pin 9 of the serial connector for a POS system (power over system). With the EX-44081 a low profile bracket is supplied for installation in narrow computer housings up to 8 cm height.
EXSYS EX-45364 - PCI Express card for 4x RS-232/422/485
205.3 EUR
- Interface: 4x RS-232 V.24, RS-422/485 - independent mode selection
- FIFO buffer: 16C1050 with 256 bytes
- I/O addresses and interrupt: assigned by the system BIOS, IRQ sharing
- Data bits: 5, 6, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422/485 signals
- - RS-422 - 4 wire (TXD+/-, RXD+/-) (full duplex)
- - RS-485 - 4 wire (TXD+/-, RXD+/-) (full duplex)
- - RS-485 - 2 wire (Data+/-, Data+/-) half duplex)
- Supports ATTATM Auto Transmitter
- RS-422/485 termination - 120 ohms can be switched on or off
- Chip set: SystemBase SB16C1054PCI
The EX-45364 PCI I/O card provides 4 serial RS-232, 422 and 485 high-performance UART 16C1050 outputs. Each port can be set independently of the interface type. It was developed to add four additional serial combo ports for PCs, small workstations or servers via the PCIe bus.
The card is fully PCIe plug and play compatible and has no problems with IRQ and I/O address conflicts. It supports the ATATM Auto RS-485 Transmitter features.
EXSYS EX-42034 - PCI card to 4x serial RS-232/422/485
154.6 EUR
- INTERFACE: RS-232 V.24 / RS-422 / RS-485
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- FIFO buffer: 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- Data bits: 5, 7, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space and mark
- Supports ATTA Auto Transmitter
- Terminal: 120 ohms, can be switched on or off
- Signals:
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485: two-wire - Data+, Data- and GND
- Chip set: FTDI
The EX-42034 PCI I/O card provides four serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI or PCI-X bus. Can be configured +5 V and +12 V on pin 9 of the serial connector for a POS system (power over system).
The card is fully plug-and-play compatible. It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port.
EXSYS EX-42374 - PCI card to 4x serial RS-232/422/485
175.28 EUR
- Interface: 4 x RS-232 V.24, RS-422/485
- FIFO buffer: 16C1050 with 256 bytes
- I/O addresses and interrupt: assigned by the system BIOS, IRQ sharing
- Data bits: 5, 6, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 signals - 4 wire (TXD+/-, RXD+/-) (full duplex)
- RS-485 - 4 wire (TXD+/-, RXD+/-) (full duplex)
- RS-485 - 2 wire (Data+/-, Data+/-) (half duplex)
- Supports ATTATM Auto Transmitter
- RS-422/485 termination - 120 ohms can be switched on or off
- Supports 5-V and 3.3-V motherboards
- Chip set: SystemBase SB16C1054PCI
The EX-42374 PCI I/O card provides 4 serial RS-232, 422 and 485 high-performance UART 16C1050 outputs. It was developed to add 4 additional serial combo ports for PCs, small workstations or servers via the PCI bus. The card is fully PCI or PCI-X plug and play compatible and has no problems with IRQ and I/O address conflicts. It supports ATA TM Auto RS-485 Transmitter features. In addition, +5 V or +12 V can be configured on pin 9 for a POS system (power over system).
EXSYS EX-44316-2 - PCI Express card to 16x RS-232
402.67 EUR
- Interface: RS-232 V.24 with FIFO buffer 16C1050 with 256 bytes
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- PCIe interface compatible with 1.0a to 3.0 specifications
- I/O addresses and interrupt is assigned by the operating system, IRQ sharing
- Data bits: 5, 6, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Supports +5V or +12V on pin 9 of the serial connector
- Chip set: 2 x Asmedia SB16C1054PCI
The EX-44316-2 PCI Express I/O card provides two serial RS-232 high-performance UART 16C1050 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI Express bus.
The card is fully PCI-Express Plug-and-Play compatible and has no problems with IRQ and I/O address conflicts. In addition, +5 V or +12 V can be configured on pin 9 of the serial connector for a POS system (power over system). An Octopus cable is supplied with the EX-44316-2. With the EX-44316-2 becomes a low profile.
EXSYS EX-46012 - PCI Express card for 2x RS-232
39.87 EUR
- RS-232 V.24 interface
- FIFO buffer: 16C550 with 256 bytes
- I/O addresses and interrupt are assigned by the operating system
- PCIe interface compatible with 1.1 specifications
- Data bits: 5, 6, 7 and 8
- Stop bits: 1, 1.5 and 2
- Parity: none, even, odd, space and mark
- RS-232 signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Chip set: ASIX MCS9901CV-CC
- Includes: EX-46012, 2x low profile brackets, manual
The EX-46012 PCIe I/O card provides two serial RS-232 high-performance UART 16C550 outputs. It was developed to add two additional serial ports for a PC, small workstation or server via the PCIe bus. The EX-46012 comes with two low profile brackets for slim computer enclosures up to 8 cm in height.
- Category: serial cards
- Interface: RS-232
- Ports: 9-pin connector
- Number of ports: 2
- Bus system: PCIe
- Design: standard + low profile
EXSYS EX-44082 - PCI Express card for 2x RS-232
52.28 EUR
- RS-232, V.24 interface
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- FIFO buffer: 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- PCIe interface compatible with 1.0a to 3.0 specifications
- 5, 6, 7, and 8 data bits
- 1, 1.5, and 2 stop bits
- Parity: none, even, odd, space and mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Supports RTS/CTS and XON/XOFF Flow Control
- Supports +5V or +12V on pin 9 of all serial plugs
- Chip set: ASIX AZ99100
The EX-44082 PCI Express I/O card provides two serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI Express bus. The card is fully plug-and-play compatible. In addition, +5 V or +12 V can be configured on pin 9 of the serial connector for a POS system (power over system). With the EX-44082, two low profile brackets are supplied for installation in narrow computer housings up to 8 cm height.
EXSYS EX-42032IS - PCI card for 2x serial RS-232/422/485, opt. ISO.
154.6 EUR
- INTERFACE: RS-232 V.24 / RS-422 / RS-485
- 15 kV ESD over-voltage protection and 4.0 kV optical isolation
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- FIFO buffer: 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- Data bits: 5, 7, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space and mark
- Supports ATTATM Auto Transmitter
- Terminal: 120 ohms, can be switched on or off
- Signals:
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485: two-wire - Data+, Data- and GND
- Chip set: FTDI
The EX-42032IS PCI I/O card provides two serial RS-232, 422 and 485 High Performance UART 16C550 outputs with 15KV ESD overvoltage protection and 2.5KV optical isolation. It was developed to add two additional serial outputs for a PC, workstation or server via the PCI or PCI-X bus.
It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port. POS is not adjustable.
EXSYS EX-41052-2 - PCI card for 2x serial RS-232, incl. 2x LP
44.01 EUR
- Interface: RS232 V.24
- FIFO buffer: 16C550 with 16 bytes
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- I/O addresses and interrupt: assigned by the system BIOS, IRQ sharing
- Data bits: 5, 6, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- +5V or +12V adjustable on pin 9 of both serial plugs
- Supports 5V and 3.3 V motherboards
- Chip set: Asmedia MCS9865IV-AA
The PCI I/O card provides two serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI or PCI-X bus. Can be configured +5 V and +12 V on pin 9 of the serial connector for a POS system (power over system). With the EX-41052-2, two low profile brackets are supplied for narrow computer housings up to 8 cm height.
EXSYS EX-1123-N - USB 3.0 hub - 3 ports + Ethernet 1x Gigabit LAN
52.28 EUR
With the EX-1123-N, you can expand the USB 3.0 output of a notebook ordesktop computer to 3 additional USB 3.0 ports as well as an Ethernet 1 Gigabit
LAN connection. It is therefore possible to connect up to three external USB 2.0 or 3.0
peripherals to a USB 2.0 or 3.0 port of a notebook or desktop
computer. With the EX-1123-N, you can integrate a notebook or desktop
computer via the USB 3.0 or 2.0 output into a 10/100 or 10/1000 Mbps
network. The EX-1123-N can be simultaneously installed with an existing
network card. A power supply unit is included with delivery.
USB 3.0
• USB 3.0 hub with 3 ports
• Connections for up to three USB peripherals
• Compliant with USB 3.0 specification 1.0
• Supports all USB 2.0 to 3.0-compatible peripherals
• LED display for operation indicator
Ethernet Gigabit:
• Supports full duplex operation with IEEE 802.3x flow control and half duplex
Operation with return load flow control
• Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Supports IEEE 802.3az (Energy Efficient Ethernet)
• Supports crossover detection and auto-correction
• Supports ''wake-on LAN''
• Power supply: 5 V/2 A power supply unit
EXSYS EX6111-2P - 1-port RS232, serial, LAN adapter, PoE, metal housing
242.46 EUR
Ethernet PoE to 1 x RS-232 port- Interface: RS-232
- Number of ports: 1
- Connectors: 9-pin plug
- Power connection: DC Jack 5V
- Data transmission: 100Base-T
- Mounting type: Desktop
- Overvoltage protection: 15KV ESD
- Temperature range: 0°C to +55°C
- Power over Ethernet: Yes (PD)
The EX-6111-2PoE is a multi-protocol RS-232 serial device server designed to connect a serial RS-232 device, including POS systems, barcode readers, sensors, meters, weighing systems, CNC controllers and PLCs, to an IP-based Ethernet network. The serial device is connected via Ethernet and is available for sharing on the subnet and Internet. Remote configuration is carried out via extensive network protocols such as TCP server, TCP client, UDP, VCOM or serial Telnet/RFC2217. To ensure backward compatibility with legacy serial devices running the existing COM port application software, the EX-6111-2PoE provides a virtual COM port (VCOM) that perfectly migrates your serial application without modifying the software. The EX-6111-2PoE supports Power over Ethernet and can be powered directly via the Ethernet cable from a PoE-compliant power supply (PSE). In addition, serial devices can communicate with each other in peer-to-peer mode without the need for a PC or conversion software.
Scope of delivery:
- EX-6111-2PoE
- Power supply unit 5V/4A
- DIN rail kit
- Wall mounting kit
- User Manual
EXSYS EX-6002POE - Ethernet PoE 1Giga LAN 4 x USB 2.0 ports
164.94 EUR
The EX-6002PoE allows you to easily connect external USB 2.0 hard drive housings, memory sticks, USB scanners or USB printers over the network(10/100/1000 Mbps Ethernet) or as a USB 2.0 hub.
You are therefore no longer dependent on a specified distance but can integrate every USB 2.0 peripheral over the network with a
freely selectable IP address. The devices are controlled via the supplied software.
The EX-6002PoE is supplied in a metal housing and the four USB 2.0 ports as well as the power supply connection are screw-mountable. It can be used in a 19'' rack with DIN rail kit.
The EX-6002PoE supports power over Ethernet and requires no additional power supply unit.
• Makes 4 USB peripherals available over your existing network
• High-performance USB enhancement, server over IP or 4-port USB 2.0 hub
• Four high-speed, high-performance USB 2.0 outputs
• Supports file server, scan server or print server
• Supports fixed IP and DHCP client
• No distance limitation for USB peripherals within the network
• Can be used for MFPs (multi-function printers), USB printers, scanners, memory sticks, USB hard drives, storage devices, etc.
• Intuitive user interface for easy configuration and firmware upgrade
• The EX-6002PoE can either be controlled via TCP/IP or USB 2.0.
EXSYS EX-1132-N - USB3.0 3Port HUB-1xGiga-LAN,C-Plug,Desct.
42.61 EUR
With the EX-1132-N you can extend a USB 3.0 with C-sockets output from notebook or desktop computer to 3 additional USB 3.0 ports as well as an Ethernet 1Gigabit LAN connection. It is thus possible to connect up to three external USB 2.0 or 3.0 peripherals to a USB 2.0 or 3.0 port of notebooks or desktop computers. With the EX-1132-N, you can connect a notebook or desktop computer to a 1000MBit or 2.0 network via the USB 3.0 or output. The EX-1132-N can be installed at the same time as an existing network card and does not require an additional power supply. The EX-1132-N is supplied in an elegant metal housing.USB 3.0
- 3.0-port USB 3 HUB
- Connections for up to three USB peripheral devices
- Compliant with USB 3.0 specification 1.0
- Supports all USB 2.0 to 3.0 compatible peripherals
- Chip set: USB: Genesys GL-3520
Ethernet Gigabit:
- Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with return load flow control
- Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Supports IEEE 802.3az (Energy efficient Ethernet)
- Supports crossover detection and auto-correction
- Supports Wake-on-LAN
- Chip set: Network: ASIX AX88179
EXSYS EX-45032 - PCI Express card > 2 x serial RS-422/485
108.09 EUR
- INTERFACE: RS-232 V.24 / RS-422 / RS-485
- ±15kV IEC1000-4-2 ESD protection for RS232 I/O.
- FIFO buffer: 16C550 with 16 bytes
- I/O addresses and interrupt are assigned by the operating system
- Data bits: 5, 7, 7, 8/stop bits: 1, 1.5, 2
- Parity: none, even, odd, space and mark
- Supports ATTATM Auto Transmitter
- Terminal: 120 ohms, can be switched on or off
Signals:
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485 - 4 wire (TxD+/-, RxD+/-) full duplex
- RS-485: two-wire - Data+, Data- and GND
The EX-45032 PCI Express I/O card provides two serial RS-232 high-performance UART 16C550 outputs. It was developed to add four additional serial outputs for a PC, small workstation or server via the PCI or PCI-X bus. Can be configured +5 V and +12 V on pin 9 of the serial connector for a POS system (power over system).
The card is fully plug-and-play compatible. It supports the ATTATM Auto RS-485 Transmitter features. The RS-232, 422 or 485 transmission type can be set individually for each port.
EXSYS EX-60102 - Network card, PCIe, Gigabit Ethernet, 2x RJ45
61.58 EUR
Dual PCIe Netzwerk-Karte 2x 1Gigabit (Realtek chipset)- Support 10/100/1000 Base-T Ethernet standards
- Support Auto-MDI/MDI-X Auto (for Crossover cable)
- Support Jumbo Frame up to 9Kbytes, Pair Swap/Polarity/Skew Correction
- Wake-on-LAN and Remote Wake-up
- Support Full Duplex Flow Control (IEEE 802.3x)
- Support IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
- Activity LED to check the data transfer
- Chip-Set: Realtek RTL8111F
The EX-60102 is a Gigabit Ethernet card for with two RJ45-Ports the PCI Express bus.
It supports Half and Full Duplex as well as NWay Auto-Negotation to automatically adapt to the speed in the network (10/100/1000 Mbit/s.).
Furthermore, the EX-60102 automatically detects crossover cables and offers extensive support for various operating systems.
A low profile bracket is supplied with the card for installation in a narrow PC case.
Package Contents:
- EX-60102
- Low Profile bracket
- manual
EXSYS EX-6071C - Network card, PCI Express, Gigabit Ethernet, 1x RJ45
66.75 EUR
1Gigabit PCIe network card (Realtek chipset)- Supports 10/100/1000 Base-T Ethernet standard
- Supports Auto-MDI/MDI-X Auto (for crossover cable)
- Supports Jumbo Frame up to 9KBytes, Pair Swap/Polarity/Skew Correction
- Wake-on-LAN and remote wake-up
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
- 48KB Buffer Transmit/Receiver Chip
- Data transmission LED indicator
- Chipset: Realtek RTL8111G
The EX-6071C is a fast Gigabit Ethernet card designed for the PCI Express bus.
The EX-6071C supports a data transfer rate of up to 1000Mbit per second.
The EX-6071C supports Half and Full Duplex as well as NWay Auto-Negotation to automatically adapt to the network speed (10/100/1000 Mbit/s.).
The card is also equipped with Auto-MDI/MDI-X.
It also offers extensive support for various operating systems.
A low-profile bracket is supplied with the card for installation in a narrow PC housing.
Scope of delivery:
- EX-6071C
- Low profile bracket
- Driver CD
- manual
EXSYS EX6072POE2 - Network card, PCI Express, Gigabit Ethernet, 2x RJ45
144.22 EUR
The EX-6072PoE-2 is a fast Dual Gigabit Ethernet card designed for the PCIe bus. - Supports 10/100/1000 Base-T Ethernet standard
- Fully compatible with IEEE 802.3af PoE (PSE) Type 1 = 15.40W and IEEE802.3af PoE+ (PSE) Type 2 = 34.20W
- Maximum power delivered (PD): Type 1 = 12.95W / Type 2 = 25.50W
- Supports Auto-MDI/MDI-X Auto (for crossover cable)
- Supports Pair Swap/Polarity/Skew Correction
- Wake-on-LAN and Remote Wake-up
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding
- Microsoft NDIS 5 checksum offload (IP, TCP, UDP), Supports PCI Message Signaled Interrupt (MSI)
- 48KB Buffer Transmit/Receiver Chip
- LED indication of data transmission
- Chipset: Realtek RTL8111G
Gigabit PoE
The EX-6072PoE-2 supports ''Power over Ethernet'' and has a data transfer rate of up to 1000 MBit/s and thus offers a high speed increase compared to standard PCI network cards.
Larger amounts of data can thus be transferred faster and more efficiently in the network.
Any end devices that support Power over Ethernet can be connected to the EX-6072PoE-2 without additional PoE switches.
Network Features
The EX-6072PoE-2 supports half and full duplex as well as NWay auto-negotiation to automatically adapt to the network speed (10/100/1000 Mbps).
Furthermore the card is equipped with Auto-MDI/MDI-X.
Compatibility
It also offers a very wide support of various operating systems.
Included Low Profile bracket
A low profile bracket is supplied with the card for installation in a narrow PC case.
Scope of delivery:
- EX-6072PoE-2
- Low Profile bracket
- Driver CD
- Manual
EXSYS EX-6072-4K - Network card, PCI Express, Gigabit Ethernet, 2x RJ45
97.76 EUR
The EX-6072-4K is a fast Dual Gigabit Ethernet card, designed for the PCIe bus, which offers faster data transfer compared to the PCI BUS. The EX-6072-4K supports a data transfer rate of up to 1000MBit per second per port.
The EX-6072-4K has an optical isolation of up to 4kV for each port. Larger amounts of data can thus be transmitted faster and more efficiently in the network.
The EX-6072-4K supports half and full duplex and NWay auto-negotiation to automatically adjust to network speed (10/100/1000 Mbps).
The card is also equipped with Auto-MDI/MDI-X. In addition, it offers a very wide-ranging support of various operating systems.
A low profile bracket is supplied with the card for installation in a narrow PC housing.
- Supports 10/100/1000Base-T Ethernet standard
- Supports 4kV optical isolation for each output
- Supports Auto-MDI/MDI-X Auto (for crossover cable)
- Supports Jumbo Frame up to 9KBytes, pair Swap/polarity/Skew Correction
- Wake-on-LAN and Remote Wake-up
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1Q VLAN tagging, IEEE 802.1p Layer 2 priority encoding
- 48KB Buffer transmit/Receiver Chip
- LED display of data transmission