ELECTRO PJP CLIP 6810 - Support rail for Challenger clip
10.97 EUR
Explore the detailed sheet rich in complete information, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Support rail for Challenger clip
The use of support rails when positioning results in a firm hold and allows particularly good contact connections.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Support rail for Challenger clip
The use of support rails when positioning results in a firm hold and allows particularly good contact connections.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
The Challenger clip with its mini clamps is one of the smallest and most accurate clamp-type test probes. Its dimensions allow measurements on SMD housings with the narrowest contact spacing. Due to its special positioning, simultaneous series checks (point by point) are also possible.
- Terminal-Ø: 0,8mm
- Scope of delivery: 1 piece
- with rubber insulation
- Dia. 4 mm connection
- Colour: red
- with dia. 4 mm safety socket connection
- Safety: 1500 V CAT III/1000 V CAT IV, reinforced insulation, in accordance with EN/IEC61010-031
- Colour: green
Application:
Suitable for general electrical and electronic testing, control and measurement purposes.
The safety rating applies to DC (and AC), meaning the crocodile clips can be used on electric vehicles, hybrid vehicles and photovoltaic systems.
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: yellow
• Type: rigid
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: yellow
• Type: Flexible
• Opening: 32 mm
• Rated current: 36 A
• Rated voltage: 33 V AC / 70 V DC
• Connection: 4 mm
• Color: black
• Opening: 32 mm
• Rated current: 36 A
• Rated voltage: 33 V AC / 70 V DC
• Connection: 4 mm
• Color: red
- Colour: red
- Connection: 2-mm diameter plug connection
- Max. opening width: 9 mm
- Length: 51 mm
- Measurement category: 600 V CATII
- Current rating: 10 A
- Nickel-plated steel
- Colour: black
- Connection: 4-mm diameter plug connection
- Length: 93 mm
- Opening width: max. diameter 30 mm
- Measurement category: 1000 V CAT III / 600 V CAT IV
- Current rating: 36 A
- Nickel-plated steel
Application: for safe gripping of conductive parts. For general electrical and electronic tests, controls and measurements.
Protective finger guard.
Be sure to hold behind the finger guard to safely operate the clamp when connecting to dangerous voltages
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: blue
• Type: rigid
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: blue
• Type: Flexible
- with rubber insulation
- Dia. 4 mm connection
- Colour: black
- Colour: green
- Connection: 4-mm diameter plug connection
- Length: 93 mm
- Opening width: max. diameter 30 mm
- Measurement category: 1000 V CAT III / 600 V CAT IV
- Current rating: 36 A
- Nickel-plated steel
Application: for safe gripping of conductive parts. For general electrical and electronic tests, controls and measurements.
Protective finger guard.
Be sure to hold behind the finger guard to safely operate the clamp when connecting to dangerous voltages
- with dia. 4 mm safety socket connection
- Safety: 1500 V CAT III/1000 V CAT IV, reinforced insulation, in accordance with EN/IEC61010-031
- Colour: black
Application:
Suitable for general electrical and electronic testing, control and measurement purposes.
The safety rating applies to DC (and AC), meaning the crocodile clips can be used on electric vehicles, hybrid vehicles and photovoltaic systems.
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: yellow
• Type: Flexible
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: yellow
• Type: rigid
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: blue
• Type: Flexible
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: blue
• Type: rigid
- PVC 2.50 mm²
- Length: 25 cm
- Rated voltage: 1500 V CAT III
- Rated current: 36 A
- Colour: black
Applications:
For general electrical and electronic testing, control and measurement purposes.
The safety rating applies to DC (and AC), meaning the crocodile clips can be used on electric vehicles, hybrid vehicles and photovoltaic systems.
- with dia. 4 mm safety socket connection
- Safety: 1500 V CAT III/1000 V CAT IV, reinforced insulation, in accordance with EN/IEC61010-031
- Colour: red
Application:
Suitable for general electrical and electronic testing, control and measurement purposes.
The safety rating applies to DC (and AC), meaning the crocodile clips can be used on electric vehicles, hybrid vehicles and photovoltaic systems.
- Colour: red
- Connection: 4-mm diameter plug connection
- Length: 93 mm
- Opening width: max. diameter 30 mm
- Measurement category: 1000 V CAT III / 600 V CAT IV
- Current rating: 36 A
- Nickel-plated steel
Application: for safe gripping of conductive parts. For general electrical and electronic tests, controls and measurements.
Protective finger guard.
Be sure to hold behind the finger guard to safely operate the clamp when connecting to dangerous voltages
• Contact: Prick-Wire
• Contact resistance: 50 mOhm
• Rated current: 10 A
• Rated voltage: 1000 V CAT III
• Color: red
• Type: rigid
- Colour: black
- Connection: 2-mm diameter plug connection
- Max. opening width: 9 mm
- Length: 51 mm
- Measurement category: 600 V CATII
- Current rating: 10 A
- Nickel-plated steel
- with dia. 4 mm safety socket connection
- Safety: 1500 V CAT III/1000 V CAT IV, reinforced insulation, in accordance with EN/IEC61010-031
- Colour: yellow
Application:
Suitable for general electrical and electronic testing, control and measurement purposes.
The safety rating applies to DC (and AC), meaning the crocodile clips can be used on electric vehicles, hybrid vehicles and photovoltaic systems.
- Rated voltage: 1000 V CAT III
- Rated current: 20 A
- Contact parts: Nickel-plated steel, tin-plated steel and brass
- Colour: green
Applications: for safely gripping conductive parts. Electrical and electronic testing, control and measurement for general purposes.
- Colour: blue
- Connection: 4-mm diameter plug connection
- Length: 93 mm
- Opening width: max. diameter 30 mm
- Measurement category: 1000 V CAT III / 600 V CAT IV
- Current rating: 36 A
- Nickel-plated steel
Application: for safe gripping of conductive parts. For general electrical and electronic tests, controls and measurements.
Protective finger guard.
Be sure to hold behind the finger guard to safely operate the clamp when connecting to dangerous voltages
- with dia. 4 mm safety socket connection
- Safety: 1500 V CAT III/1000 V CAT IV, reinforced insulation, in accordance with EN/IEC61010-031
- Colour: blue
Application:
Suitable for general electrical and electronic testing, control and measurement purposes.
The safety rating applies to DC (and AC), meaning the crocodile clips can be used on electric vehicles, hybrid vehicles and photovoltaic systems.
- Colour: yellow
- Connection: 4-mm diameter plug connection
- Max. opening width: 9 mm
- Length: 51 mm
- Measurement category: 600 V CATII
- Current rating: 10 A
- Nickel-plated steel
The small size of the crocodile clip fits in tight environments. And despite its small size, the crocodile clip can be connected to standard 4-mm banana connectors, opens wide and grips the measuring range well.
Protective finger guard.
Be sure to hold behind the finger guard to safely operate the clamp when connecting to dangerous voltages
Colour: red
Connection: 4-mm diameter plug connection
Max. opening width: 9 mm
Length: 51 mm
Measurement category: 600 V CATII
Current rating: 10 A
Nickel-plated steel
The small size of the crocodile clip fits in tight environments. And despite its small size, the crocodile clip can be connected to standard 4-mm banana connectors, opens wide and grips the measuring range well.
Protective finger guard. Be sure to hold behind the finger guard
for safe operation of the clamp when connected to dangerous voltages
The Challenger clip with its mini clamps is one of the smallest and most accurate clip probe tips. Its dimensions allow measurements on SMD housings with the smallest of contact distances. Through the special positioning, range controls (point to point) are also possible.
Clamping Ø: 0.8 mm
- 2 safety measuring leads
- 2 safety probes with adapters
- 2 insulated crocodile clips
- 2 cable shoe adapters
- 2 socket adapters 4 mm
- 2 flexible safety clamp grippers
- 2 miniature spring tips
1000 V CAT III / up to 20 A
- 2 test probes with test leads
- 2 rigid IP2X crocodile clips
- 2 IP2X crocodile clips
- 1000V CATIV
- Colour: red
- Length: 137 mm
- Hook diameter: max. 9.2 mm
- Measurement category: 1000 V CATIV
- Current rating: 20 A
- Contact: nickel-plated brass
Applications: for safe gripping of conductive parts. For general electrical and electronic tests, controls and measurements.
Example: 9-mm diameter round profile and 1 mm x 16 mm rectangular profile.
Protective finger guard.
Be sure to hold behind the finger guard to safely operate the clamp when connecting to dangerous voltages
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: black
• Type: rigid
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: black
• Type: Flexible
- 1000V CATIV
- Colour: black
- Length: 137 mm
- Hook diameter: max. 9.2 mm
- Measurement category: 1000 V CATIV
- Current rating: 20 A
- Contact: nickel-plated brass
Applications: for safe gripping of conductive parts. For general electrical and electronic tests, controls and measurements.
Example: 9-mm diameter round profile and 1 mm x 16 mm rectangular profile.
Protective finger guard.
Be sure to hold behind the finger guard to safely operate the clamp when connecting to dangerous voltages
- For high-voltage measurements (5000 V CAT I - transient overvoltages 2000 V)
- Rated current: 10 A
- Contact parts: nickel-plated steel and steel
- Colour: black
• Contact: Crocodile jaws
• Contact resistance: 50 mOhm
• Rated current: 6 A
• Rated voltage: 1000 V CAT III
• Color: rot
• Type: Flexible
