ECOVACS GOAT MBK120001 - Replacement blades for GOAT, 12 pieces

• Saw blades - for jigsaw 9034-1 - 9034P-1 - 9034P-2
• Package contents 5 pieces
• Total length: 93 mm
• Mounting 1 x 13 mm
• 32 teeth / inch
• For stainless steel and hard metal - material thickness 1.2 mm - 3 mm
• Bi-metal

Saw Blades, compatible with jigsaws 9034-1, 9034 P-1, and 9034 P-2

• Package contents: 5 pieces
• 93 mm total length
• Shank: 1 x 13 mm
• 24 teeth
• Dimensions / Length: 93 mm

Disclaimer: Incorrect or defective replacement parts, or their improper installation, can lead to damage, malfunction, or total failure of the device.
The use of non-approved replacement parts or improper installation voids all warranty, service, compensation, and liability claims against the manufacturer or its agents, dealers, and representatives.

• For non-ferrous metal, GRP, plastic, Plexiglas and wood.
• 1.76 x 0.25 mm

• For hard materials like iron, PERTINAX.
• 130 x 0.6 x 0.3 mm

• For soft and hard wood, plastic, plexiglass and soft non-ferrous metals
• 130 x 1.20 x 0.38 mm

Increases your safety: Wiha slim blades ensure good and protected access to deep-lying screws.

Protects your health: With patented SoftFinish® handle design for hand and muscle-friendly working. Recommended by AGR doctors and therapists!

Increases your efficiency: Unique Wiha handle size concept with optimum balance between power and control.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

When screwing the tools by hand, the wrists and muscles are subjected to heavy strain in the long run. The particularly ergonomically shaped SoftFinish® screwdriver, which ensures optimum transmission of hand power, provides a remedy. With the long, slim handle sizes, small screws can be screwed in safely and quickly. For screwing in large screws, there are large handle sizes with which higher torques can be applied. In addition, the different handle sizes are adapted to the hand of professional screwdrivers, which is always the same size. The roll-off protection and the screw symbol printed on the end of the handle ensure efficient working. In the Wiha slimTECHNOLOGY, which was specially developed for electrical applications, the protective insulation has been integrated into the blade to enable blades to be up to 33% slimmer. This means that even deep-set screw and spring elements can be reached effortlessly. The insulated screwdrivers are subjected to routine testing in accordance with the international standard IEC 60900 and enable safe working in the area of live parts up to 1,000 V AC.

Application: For work in the area of live parts up to 1,000 V AC.

• 1 x screwdriver SoftFinish® electric slimFix Phillips (35393) PH1 x 80 mm
• 1 x screwdriver SoftFinish® electric slimFix Phillips (35394) PH2 x 100 mm
• 1 x screwdriver SoftFinish® electric slimFix PlusMinus/Pozidriv (36330) SL/PZ2 x 100 mm
• 1 x screwdriver SoftFinish® electric slimFix Pozidriv (35395) PZ1 x 80 mm
• 1 x screwdriver SoftFinish® electric slimFix Pozidriv (35396) PZ2 x 100 mm
• 1 x screwdriver SoftFinish® electric slimFix slot (35390) 4.0 mm x 100 mm
• 1 x screwdriver SoftFinish® electric slimFix slot (35391) 5.5 mm x 125 mm
• 1 x screwdriver SoftFinish® electric slimFix slot (35392) 6.5 mm x 150 mm
• 1 x screwdriver SoftFinish® electric slimFix slot (35446) 3.5 mm x 100 mm
• 1 x screwdriver SoftFinish® electric slimFix TORX® (36537) T15 x 100 mm
• 1 x screwdriver SoftFinish® electric slimFix TORX® (36538) T20 x 100 mm
• 1 x screwdriver SoftFinish® electric slimFix TORX® (36539) T25 x 125 mm

• high-quality rotating spare circular blade cassette for the Leitz Precision Office Rotary Trimmer
• Straight blade is ideal for use in the office or for complex craft work
• Designed for simultaneous cutting of up to 15 sheets of paper (80 g/m²)
• Rotating circular blade is securely enclosed in a plastic cassette
• Quick and easy replacement by simply inserting the cassette into the ergonomically shaped cutting head
• Manufactured from ground steel for resilience and durability
• Cutting type: Rotating blade

• For soft and hard wood, plastic, plexiglass and soft non-ferrous metals.
• 130 x 1.50 x 0.48 mm

• For thin materials, soft and hard wood and plastic.
• 1.86 x 0.24 mm

• high energy saving
• Also with special functions: dimmable
• Up to 25.000h lifetime
• Perfect replacement for conventional light bulbs, easy exchange

• The 4-way spread ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials.
• The special fixing blades ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process.
• The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster.
• The special shape of the plug makes it easy to place in the drill hole with just a few hammer blows.
• The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation.
• The user can automatically tell when the screw is properly seated thanks to the noticeable tightening torque, which prevents overtightening.

• The 4-way spread ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials.
• The special fixing blades ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process.
• The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster.
• The special shape of the plug makes it easy to place in the drill hole with just a few hammer blows.
• The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation.
• The user can automatically tell when the screw is properly seated thanks to the noticeable tightening torque, which prevents overtightening.

• 4-fold expansion for high retaining values.
• Fixing tabs for screw fixing and flexible installation.
• The dowel can be installed with little effort.
• The edge of the dowel prevents it slipping deeper into the borehole.
• The noticeable tightening torque prevents the screw from being overtightened.

• The 4-way spread ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials.
• The special fixing blades ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process.
• The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster.
• The special shape of the plug makes it easy to place in the drill hole with just a few hammer blows.
• The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation.
• The user can automatically tell when the screw is properly seated thanks to the noticeable tightening torque, which prevents overtightening.

• With impact cap
• Square drive in impact cap
• Hexagon at the blade
• Output: Phillips profile PH, slotted profile

• For hard materials like iron, PERTINAX.
• 130 x 0.75 x 0.36 mm

• For hard materials like iron, PERTINAX.
• 130 x 0.85 x 0.4 mm

• For soft and hard wood, plastic, plexiglass and soft non-ferrous metals
• 130 x 1.20 x 0.38 mm

• Material: stainless steel
• Grind: double-sided, extra sharp
• Suitable for Husqvarna, Gardena, Segway, and Flymo
• Color: silver
• Mounting hole diameter: approx. 5 mm
• Dimensions (L x W x H): approx. 35.0 x 18.0 x 0.75 mm

• 30 x replacement blades
• 30 x M4 x 12 mm screws

• Box

• Material: stainless steel
• Grind: double-sided, extra sharp
• Suitable for Husqvarna, Gardena, Segway, and Flymo
• Color: silver
• Mounting hole diameter: approx. 5 mm
• Dimensions (L x W x H): approx. 35.5 x 18.5 x 0.5 mm

• 30 x replacement blades
• 30 x M4 x 9.5 mm screws

• Box

• Material: stainless steel
• Grind: double-sided, extra sharp
• Suitable for Husqvarna, Gardena, Segway, and Flymo
• Color: silver
• Mounting hole diameter: approx. 5 mm
• Dimensions (L x W x H): approx. 35.0 x 18.0 x 0.6 mm

• 30 x replacement blades
• 30 x M4 x 12 mm screws

• Box

• For bores from 1.5 mm. Cutting on all sides, no twisting of the workpiece necessary (important for large parts). For plastic, soft and hard wood.
• 1.2 mm

• Material: stainless steel
• Grind: double-sided, extra sharp
• Suitable for Worx Landroid
• Color: silver
• Mounting hole diameter: approx. 7 mm
• Dimensions (L x W x H): approx. 36.0 x 18.0 x 1.0 mm

• 30 x replacement blades
• 30 x M4 x 10 mm screws

• Box