EATON EL800USBDI - UPS, 800 VA / 500 W, USB PORT

194.66 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
The Eaton Ellipse ECO is a slim-line power supply protection with built-in high-performance surge protection. With its efficient electrical design and EcoControl function, the Eaton Ellipse ECO helps you save up to 25% energy compared to previous-generation UPSs.
General Data:
Ideal for protecting:
Standards:
With their efficient electrical design and the EcoControl
Function (USB models), which peripherals automatically
Together with the master device, the will help you
Eaton Ellipse ECO, compared to previous-generation UPSs, up to
To save 25% energy.
In addition to a battery-backed power backup,
To keep your equipment in operation even in the event of a power failure,
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-performance surge protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines.
Through the HID-compatible interface is compatibility with all
Common operating systems also without additional drivers
guaranteed.
Further technical details can be found in the data sheet.
EAN: 3553340620829
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
The Eaton Ellipse ECO is a slim-line power supply protection with built-in high-performance surge protection. With its efficient electrical design and EcoControl function, the Eaton Ellipse ECO helps you save up to 25% energy compared to previous-generation UPSs.
General Data:
- 800 VA / 500 W.
- 184 - 264 V.
- 6 min battery life at 70% load
- USB port
- Eaton Intelligent Power Software
- LED display and acoustic signal for battery replacement
- Replaceable, sealed batteries
- 3 outlets with surge protection and backup
- 1 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Ideal for protecting:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE mark
With their efficient electrical design and the EcoControl
Function (USB models), which peripherals automatically
Together with the master device, the will help you
Eaton Ellipse ECO, compared to previous-generation UPSs, up to
To save 25% energy.
In addition to a battery-backed power backup,
To keep your equipment in operation even in the event of a power failure,
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-performance surge protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines.
Through the HID-compatible interface is compatibility with all
Common operating systems also without additional drivers
guaranteed.
Further technical details can be found in the data sheet.
EAN: 3553340620829
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products

General Data:
- 500 VA / 350 W.
- 184 - 276 V.
- 9 min battery life at 70% load
- 1 USB and 1 serial port
- Line-Interactive Technology
- 4 Cold Appliance Sockets
- Automatic Battery Test
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040 -3
- CB Report
- CE mark
The LCD display shows the most important UPS parameters such as input and output voltage, load and battery life. The configuration options for the output voltage, the audible alarm and the sensitivity are also shown.
The Eaton 5SC offers a USB and a RS232 interface. The USB interface is HID-compatible, providing automatic integration with Windows, Mac OS and Linux.
Longer battery life: Eaton's ABM® technology uses an innovative three-stage charging system for battery management, which extends battery life by up to 50%.
Easy battery replacement via front cover for longer UPS life.
Further technical details can be found in the data sheet.

General Data:
- 1200 VA / 750 W.
- 165 - 285 V.
- 5 min battery life at 70% load
- USB port
- Eaton UPS companion software on CD ROM
- Line-Interactive Technology
- Replaceable, sealed batteries
- 4 outlets with surge protection and backup
- 4 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Advanced protection for:
- Workstations
- Network Devices
- Peripherals
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040-2
- CB Report
- CE mark
On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.
The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 20% can be achieved.
By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.
The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.
Further technical details can be found in the data sheet.

General Data:
- 1200 VA / 750 W.
- 184 - 264 V.
- 6 min battery life at 70% load
- USB port
- Eaton Intelligent Power Software
- LED display and acoustic signal for battery replacement
- Replaceable, sealed batteries
- 4 outlets with surge protection and backup
- 4 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Ideal for protecting:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE mark
With their efficient electrical design and the EcoControl
Function (USB models), which peripherals automatically
Together with the master device, the will help you
Eaton Ellipse ECO, compared to previous-generation UPSs, up to
To save 25% energy.
In addition to a battery-backed power backup,
To keep your equipment in operation even in the event of a power failure,
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-performance surge protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines.
Through the HID-compatible interface is compatibility with all
Common operating systems also without additional drivers
guaranteed.
Further technical details can be found in the data sheet.

General Data:
- 1600 VA / 1000 W.
- 184 - 264 V.
- 6 min battery life at 70% load
- USB port
- Eaton Intelligent Power Software
- LED display and acoustic signal for battery replacement
- Replaceable, sealed batteries
- 4 outlets with surge protection and backup
- 4 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Ideal for protecting:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE mark
With their efficient electrical design and the EcoControl
Function (USB models), which peripherals automatically
Together with the master device, the will help you
Eaton Ellipse ECO, compared to previous-generation UPSs, up to
To save 25% energy.
In addition to a battery-backed power backup,
To keep your equipment in operation even in the event of a power failure,
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-performance surge protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines.
Through the HID-compatible interface is compatibility with all
Common operating systems also without additional drivers
guaranteed.
Further technical details can be found in the data sheet.

General Data:
- 1000 VA / 600 W.
- 175 - 275 V.
- 8 min battery life at 70% load
- HID-compatible USB port
- Line-Interactive Technology
- Replaceable Batteries
- 4 cold appliance sockets with surge protection and backup
- 4 cold appliance sockets with surge protection only
- Automatic Battery Test
Ideal for protecting:
- Workstations
- Business Telephony
- Network Devices
- Point-of-sale equipment
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040 -3
- CB Report
- CE mark
The Eaton 5S UPS provides effective power protection, even in high-noise electrical environments. Voltage fluctuations are automatically compensated by a voltage regulator (AVR, booster/fader) without using the batteries.
The 5S is not only a battery backup that keeps your equipment up and running even in the event of power outages, but also provides effective protection against harmful surges.
The 5S also protects your network equipment against voltage spikes coming through the back door via Ethernet, Internet or telephone lines.
Your regular battery self-test warns early if a battery replacement is necessary.
The easy-to-replace batteries help to prolong UPS life.
The 5S can be installed vertically above, on or under a table, or horizontally under a screen. Its compact, thin form factor allows it to easily integrate into space-constrained environments.
Further technical details can be found in the data sheet.

General Data:
- 650 VA / 400 W.
- 165 - 285 V.
- 5 min battery life at 70% load
- USB port
- Eaton UPS companion software on CD ROM
- Line-Interactive Technology
- Replaceable, sealed batteries
- 3 cold appliance sockets with surge protection and backup
- 1 cold appliance sockets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Advanced protection for:
- Workstations
- Network Devices
- Peripherals
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040-2
- CB Report
- CE mark
On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.
The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 15% can be achieved.
By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.
The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.
Further technical details can be found in the data sheet.

General Data:
- 1600 VA / 1000 W.
- 165 - 285 V.
- 5 min battery life at 70% load
- USB port
- Eaton UPS companion software on CD ROM
- Line-Interactive Technology
- Replaceable, sealed batteries
- 4 outlets with surge protection and backup
- 4 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Advanced protection for:
- Workstations
- Network Devices
- Peripherals
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040-2
- CB Report
- CE mark
On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.
The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 20% can be achieved.
By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.
The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.
Further technical details can be found in the data sheet.

General Data:
- 700 VA / 420 W.
- 175 - 275 V.
- 5 min battery life at 70% load
- HID-compatible USB port
- Line-Interactive Technology
- Replaceable Batteries
- 3 cold appliance sockets with surge protection and backup
- 3 IEC outlets with surge protection only
- Automatic Battery Test
Ideal for protecting:
- Workstations
- Business Telephony
- Network Devices
- Point-of-sale equipment
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040 -3
- CB Report
- CE mark
The Eaton 5S UPS provides effective power protection, even in high-noise electrical environments. Voltage fluctuations are automatically compensated by a voltage regulator (AVR, booster/fader) without using the batteries.
The 5S is not only a battery backup that keeps your equipment up and running even in the event of power outages, but also provides effective protection against harmful surges.
The 5S also protects your network equipment against voltage spikes coming through the back door via Ethernet, Internet or telephone lines.
Your regular battery self-test warns early if a battery replacement is necessary.
The easy-to-replace batteries help to prolong UPS life.
The 5S can be installed vertically above, on or under a table, or horizontally under a screen. Its compact, thin form factor allows it to easily integrate into space-constrained environments.
Further technical details can be found in the data sheet.

General Data:
- 650 VA / 400 W.
- 165 - 285 V.
- 5 min battery life at 70% load
- USB port
- Eaton UPS companion software on CD ROM
- Line-Interactive Technology
- Replaceable, sealed batteries
- 3 outlets with surge protection and backup
- 1 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Advanced protection for:
- Workstations
- Network Devices
- Peripherals
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040-2
- CB Report
- CE mark
On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.
The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 15% can be achieved.
By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.
The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.
Further technical details can be found in the data sheet.

General Data:
- 850 VA / 510 W.
- 165 - 285 V.
- 5 min battery life at 70% load
- USB port
- Eaton UPS companion software on CD ROM
- Line-Interactive Technology
- Replaceable, sealed batteries
- 3 outlets with surge protection and backup
- 1 outlets with surge protection only
- Automatic Battery Test
- Resettable Fuse
Advanced protection for:
- Workstations
- Network Devices
- Peripherals
Standards:
- IEC 61643-1
- IEC/EN 62040-1
- IEC/EN 62040-2
- CB Report
- CE mark
On the LCD screen of the Eaton Ellipse PRO are not
Only system status and measured values clearly displayed, also
The configuration of the desired UPS settings is performed
relieved by him.
The EcoControl function automatically deactivates the peripheral devices,
When the master device is turned off, do so
Energy savings of up to 15% can be achieved.
By Automatic voltage Regulation (AVR) voltage control
If voltage fluctuations are corrected immediately,
Therefore, the work can be continued without battery operation,
When voltage drops or overvoltages occur.
The Ellipse PRO has a high-performance overvoltage protection
According to IEC 61643-1. It also protects data transmissions
Via Ethernet, Internet and telephone connections.
Further technical details can be found in the data sheet.

Complete protection
- During a power outage, the Eaton 3S provides emergency power via the battery and advanced overvoltage protection to prevent damage from lightning strikes or mains surges.
- In the event of a power failure that lasts longer than expected, Eaton software will safely shut down your computer without losing data.
Modern application and easy integration
- The compact and attractive design with a high-gloss surface fits perfectly into any modern living or office environment.
- IEC outputs are available for professional use.
- To facilitate installation, a wall mounting system is implemented in all models.
Don't worry
- The surge protection complies with the international standard IEC 61643-11.
- The 10 A circuit breaker protects your equipment against overload.
Comprehensive protection for:
- Computers, peripherals and multimedia
- TV, video and hi-fi equipment: Home cinema equipment, NAS, digital decoders, etc
- Router
- Game consoles
- Broadband modems (Internet and TV) and IP telephones
- Housewares, etc.

Complete protection
- During a power outage, the Eaton 3S provides emergency power via the battery and advanced overvoltage protection to prevent damage from lightning strikes or mains surges.
- In the event of a power failure that lasts longer than expected, Eaton software will safely shut down your computer without losing data.
- To protect routers from interference over the data line, the Eaton 3S also includes RJ11/xDSL data line protection.
Modern application and easy integration
- The compact and attractive design with a high-gloss surface fits perfectly into any modern living or office environment.
- IEC outputs are available for professional use.
- To facilitate installation, a wall mounting system is implemented in all models.
Don't worry
- The surge protection complies with the international standard IEC 61643-11.
- The 10 A circuit breaker protects your equipment against overload.
Comprehensive protection for:
- Computers, peripherals and multimedia
- TV, video and hi-fi equipment: Home theater equipment, NAS, digital decoders, etc.
- Router
- Game consoles
- Broadband modems (Internet and TV) and IP telephones
- Housewares, etc.

General data:
- 650 VA / 400 W
- 184 - 264 V
- 6 min battery life at 70% load
- USB-Port
- LED indicator and battery replacement alarm
- Replaceable, sealed batteries
- 3 sockets with surge protection and backup
- 1 sockets with overvoltage protection only
- Automatic battery test
- Resettable fuse
Ideal for the protection of:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP-Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE-Zeichen
In addition to a battery-backed power backup,
which keeps your equipment running even in the event of a power failure
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-power overvoltage protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines protects.
Further technical details can be found in the attached data sheet.

Complete protection
- During a power outage, the Eaton 3S provides emergency power via the battery and advanced overvoltage protection to prevent damage from lightning strikes or mains surges.
- In the event of a power failure that lasts longer than expected, Eaton software will safely shut down your computer without losing data.
- To protect routers from interference over the data line, the Eaton 3S also includes RJ11/xDSL data line protection.
Modern application and easy integration
- The compact and attractive design with a high-gloss surface fits perfectly into any modern living or office environment.
- The Eaton 3S 700VA and 850VA models offer two 2A USB ports for charging any mobile device (mobile phone, tablet, etc...).
- To facilitate installation, a wall mounting system is implemented on all models.
Do not worry
- The surge protection complies with the international standard IEC 61643-11.
- The 10 A circuit breaker protects your equipment against overload.
Comprehensive protection for:
- Computers, peripherals and multimedia
- TV, video and hi-fi equipment: Home theater equipment, NAS, digital decoders, etc.
- Router
- Game consoles
- Broadband modems (Internet and TV) and IP telephones
- Housewares, etc.

Complete protection
- During a power outage, the Eaton 3S provides emergency power via the battery and advanced overvoltage protection to prevent damage from lightning strikes or mains surges.
- In the event of a power failure that lasts longer than expected, Eaton software will safely shut down your computer without losing data.
Modern application and easy integration
- The compact and attractive design with a high-gloss surface fits perfectly into any modern living or office environment.
- To facilitate installation, a wall mounting system is implemented in all models.
Don't worry
- The surge protection complies with the international standard IEC 61643-11.
- The 10 A circuit breaker protects your equipment against overload.
Comprehensive protection for:
- Computers, peripherals and multimedia
- TV, video and hi-fi equipment: Home theater equipment, NAS, digital decoders, etc.
- Router
- Game consoles
- Broadband modems (Internet and TV) and IP telephones
- Household goods, etc.

Complete protection
- During a power outage, the Eaton 3S provides emergency power via the battery and advanced overvoltage protection to prevent damage from lightning strikes or mains surges.
- In the event of a power failure that lasts longer than expected, Eaton software will safely shut down your computer without losing data.
- To protect routers from interference over the data line, the Eaton 3S also includes RJ11/xDSL data line protection.
Modern application and easy integration
- The compact and attractive design with a high-gloss surface fits perfectly into any modern living or office environment.
- The Eaton 3S 700VA and 850VA models offer two 2A USB ports for charging any mobile device (mobile phone, tablet, etc...).
- To facilitate installation, a wall mounting system is implemented on all models.
Do not worry
- The surge protection complies with the international standard IEC 61643-11.
- The 10 A circuit breaker protects your equipment against overload.
Comprehensive protection for:
- Computers, peripherals and multimedia
- TV, video and hi-fi equipment: Home theater equipment, NAS, digital decoders, etc.
- Router
- Game consoles
- Broadband modems (Internet and TV) and IP telephones
- Housewares, etc.

- 1600 VA / 1000 Watt
- 8x IEC outputs: 4x overvoltage protection + battery backup, 4x overvoltage protection only
- Protection of the telephone/fax/modem line (RJ45)
- Display, USB interface, incl. USB cable
- Fan permanently active
- 36 months warranty incl. batteries*
The Eaton Ellipse PRO 650-1600VA is a line-interactive UPS, specially developed for the protection of workstations with demanding applications.
The Ellipse PRO is equipped with an LCD display for real-time status display and measured values.
It also has EcoControl sockets, which enable energy savings of up to 20 percent, as well as Advanced Surge Reduction (ASR) surge protection in accordance with the requirements of the IEC 616431-1 standard.
*Only valid in EU countries!
Energy-saving power supply protection for workstations
The LCD screen of the Eaton Ellipse PRO not only clearly displays the system status and measured values, it also makes it easier to configure the desired UPS settings.
The EcoControl function automatically deactivates the peripheral devices when the master device is switched off, thereby achieving energy savings of up to 20%.
The Automatic Voltage Regulation (AVR) function corrects voltage fluctuations immediately, so work can continue without battery operation if voltage drops or overvoltages occur.
The Ellipse PRO has high-performance overvoltage protection in accordance with IEC 61643-1.
It also protects data transmissions via Ethernet, Internet and telephone connections.
Simple integration and installation
The Ellipse PRO is optionally equipped with four (for 650/850 VA) or eight (for 1200/1600 VA) protective contact (DIN) or IEC sockets.
This makes it easy to connect standard computer configurations with peripheral devices.
Thanks to its extra-flat design, the Ellipse PRO can be easily installed in any office environment.
Possible applications include vertical installation (e.g. under the desk), horizontal installation (e.g. under the monitor), 19-inch rack mounting (optional 2U mounting kit) and wall mounting (optional mounting kit).
The Ellipse PRO is equipped with a USB port and comes complete with USB cable and the Eaton UPS Companion software, which ensures safe shutdown of the system, recording of energy consumption and easy configuration of UPS settings.
Comprehensive safety
- Three-year warranty, including on the batteries
- Unlimited warranty for the connected computer equipment (only in EU countries and Norway)
- The batteries are subjected to automatic self-tests at regular intervals, ensuring timely detection of batteries requiring replacement
- Easy-to-replace batteries help extend the life of the UPS

- 1200 VA / 750 Watt
- 8x IEC outputs: 4x overvoltage protection + battery backup, 4x overvoltage protection only
- Protection of the telephone/fax/modem line (RJ45)
- Display, USB interface, incl. USB cable
- Fan permanently active
- 36 months warranty incl. batteries*
The Eaton Ellipse PRO 650-1600VA is a line-interactive UPS, specially developed for the protection of workstations with demanding applications.
The Ellipse PRO is equipped with an LCD display for real-time status display and measured values.
It also has EcoControl sockets, which enable energy savings of up to 20 percent, as well as Advanced Surge Reduction (ASR) surge protection in accordance with the requirements of the IEC 616431-1 standard.
*Only valid within the EU!
Energy-saving power supply protection for workstations
The LCD screen of the Eaton Ellipse PRO not only clearly displays the system status and measured values, it also makes it easier to configure the desired UPS settings.
The EcoControl function automatically deactivates the peripheral devices when the master device is switched off, thereby achieving energy savings of up to 20%.
The Automatic Voltage Regulation (AVR) function corrects voltage fluctuations immediately, so work can continue without battery operation if voltage drops or overvoltages occur.
The Ellipse PRO has high-performance overvoltage protection in accordance with IEC 61643-1.
It also protects data transmissions via Ethernet, Internet and telephone connections.
Simple integration and installation
The Ellipse PRO is optionally equipped with four (for 650/850 VA) or eight (for 1200/1600 VA) protective contact (DIN) or IEC sockets.
This makes it easy to connect standard computer configurations with peripheral devices.
Thanks to its extra-flat design, the Ellipse PRO can be easily installed in any office environment.
Possible applications include vertical installation (e.g. under a desk), horizontal installation (e.g. under a monitor), 19-inch rack mounting (optional 2U mounting kit) and wall mounting (optional mounting kit).
The Ellipse PRO is equipped with a USB port and comes complete with USB cable and the Eaton UPS Companion software, which ensures safe shutdown of the system, recording of energy consumption and easy configuration of UPS settings.
Comprehensive safety
- Three-year warranty, including on the batteries
- Unlimited warranty for the connected computer equipment (only in EU countries and Norway)
- The batteries are subjected to automatic self-tests at regular intervals, ensuring timely detection of batteries requiring replacement
- Easy-to-replace batteries help extend the life of the UPS

General data:
- 500 VA / 300 W
- 184 - 264 V
- 5 min battery life at 70% load
- LED indicator and battery replacement alarm
- Replaceable, sealed batteries
- 3 sockets with surge protection and backup
- 1 sockets with overvoltage protection only
- Automatic battery test
- Resettable fuse
Ideal for the protection of:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP-Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE mark
In addition to a battery-backed power backup,
which keeps your equipment running even in the event of a power failure
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-power overvoltage protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines protects.
You can download a current version for safely controlling and shutting down the system here

Switchable output sockets enable the targeted switching off of individual loads and increase the bridging time.
RS232 and USB interface
Emergency stop interface
Slot for optional interface adapter (SNMP adapter or AS400/relay card)
Contains the UPS management software ''DataWatch'' for automatic shutdown, power management and monitoring. Suitable for all major operating systems (WIN, LINUX, UNIX, MAC, VMware, Citrix etc.)

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 450Watts / 800VA
- Max Configurable Power (Watts): 450Watts / 800VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 450Watts / 800VA
- Max Configurable Power (Watts): 450Watts / 800VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical / 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for...

General data:
- 650 VA / 400 W
- 184 - 264 V
- 6 min battery life at 70% load
- LED indicator and battery replacement alarm
- Replaceable, sealed batteries
- 3 sockets with surge protection and backup
- 1 sockets with overvoltage protection only
- Automatic battery test
- Resettable fuse
Ideal for the protection of:
- Computers and peripherals
- DSL modems (Internet and TV)
- IP-Telephony equipment
- POS equipment
Standards:
- IEC 61643-1
- IEC 62040-1
- IEC 60950-1
- IEC 62040-2
- CB Report
- CE-Zeichen
In addition to a battery-backed power backup,
which keeps your equipment running even in the event of a power failure
The Ellipse ECO also offers effective protection against overvoltage damage.
It contains a high-power overvoltage protection according to
IEC 61643-1, which also includes data connections such as Ethernet,
Internet and telephone lines protects.
You can download a current version for safely controlling and shutting down the system here

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Cold-start capable
Provides temporary battery power when the utility power is out.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Serial connectivity
Provides management of the UPS via a serial port.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Network manageable
Provides remote power management of the UPS over the network.

- Technology: Line - interactive
- Design: tower
Input
- Nominal voltage: 230 V
- Voltage tolerance: 162 - 290 V
- Stabilizer: AVR (Buck & Boost)
- Nominal frequency: 50 / 60 Hz (automatic detection)
- Automatic Detection Frequency: Yes
- Protection: Resettable thermal switch
Output
- 2x safety contact
- 2x USB
- Nominal voltage: 230 V
- Precision voltage (battery mode): ±10%
- Power (VA/W): 500 / 300
- Power (VA): 500
- Waveform (battery mode): pseudosinusoidal
- Frequency: 50 / 60 Hz (automatic detection)
- Precision frequency (battery mode): ±1Hz
- Compatible with APFC loads: yes
Optimal electrical protection for office environments and office systems
Salicru's SPS SOHO+ series of uninterruptible power supplies (UPS/UPS) offer Line-Interactive technology, compatibility with Active Power Factor Correction (APFC) loads, and a dual front-panel USB charger as their most notable benefits
The Line-Interactive technology is based on an automatic AVR voltage regulator (buck/boost).
This reduces any fluctuations in the input voltage and at the same time causes less use of the batteries, thus extending their life.
Therefore, the UPS has maximum autonomy in case of need.
In addition, this series counts on a USB interface with HID protocol for control, configuration of parameters and for controlled shutdown/standby of the computer.
Also available is a software package for monitoring and managing the assigned environments, including for virtual systems.
Batteries
- Protection: against deep discharge, against short circuit by fuse
- Battery type: Pb-Ca sealed, AGM, maintenance free
- Charge time: 2 - 4 hours to 90%
Communication
- Ports: USB (HID protocol)
- Monitoring software: For Windows, Linux and Mac
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, after the backup time of the battery is over
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-62040-2
- Operation: EN-62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

- Technology: Line-interactive
- Design: tower
Input
- Nominal voltage: 220 V / 230 V / 240 V AC
- Voltage tolerance: up to 162 V - 290 V
- Stabilizer: AVR Buck / Boost
- Nominal frequency: 50 / 60 Hz
- Automatic detection frequency: Yes
- Protection: circuit breaker
Output
- 2x protective contact
- Nominal voltage: 220 V / 230 V / 240 V AC
- Precision voltage (battery mode): ±10%
- Power (VA): 500
- Waveform (battery mode): modified sine wave
- Frequency: 50 / 60 Hz ± 1 Hz (1)
- Transmission time: 2 / 6 ms
The best electrical protection for domestic and professional office equipment
Salicru's SPS ONE series, an uninterruptible power supply system (UPS/UPS) in mini-tower format of line-interactive type, enables battery backup (with pseudo-sinusoidal inverter output) and protection against overloads.
During the voltage interruptions, the SPS ONE units provide a battery backup to perform a proper shutdown of the IT system and protect it against the loss of data and damage to the electronics.
Operation via automatic voltage regulation (AVR) to correct small voltage fluctuations without having to use the battery, thus extending its useful life.
The AVR function is essential in areas where voltage fluctuations occur frequently.
Integrates a UPS/PC communication interface of the USB type with HID protocol, allowing configuration of parameters, control of the UPS and shutdown and standby of the computer through the USB port.
Compatible with operating systems-Windows, Linux and Mac.
The software for monitoring and managing the UPS and closing files and applications for Windows, Linux and Mac operating systems is available for free download from www.salicru.com.
Batteries
- Battery type: lead/calcium, maintenance-free, sealed, design life 3-5 years
- Charge time: 4-6 hours to 90% of capacity
- Battery can be replaced by user: Yes
- Runtime: Up to 20 minutes
- Battery replacement and privacy: Yes
- Communication
- Ports: USB HID
- Monitoring software: For Windows, Mac, Linux and UNIX
Other features
- Cold startup (boot up using batteries): yes
- Automatic restart: Yes, when mains power is applied
Standards
- Safety: EN-IEC 62040-1
- Electromagnetic compatibility (EMC): EN-IEC 62040-12
- Operation: EN 62040-3
- Quality management and environmental protection: ISO 9001 & ISO 14001

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (4) Schutzkontakt CEE 7 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: Schutzkontakt CEE 7/7P
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet...

Best Value UPS with Battery Backup & Surge Protection for Electronics and Computers
Output
- Output power capacity: 300Watts / 500VA
- Max Configurable Power (Watts): 300Watts / 500VA
- Nominal Output Voltage: 230V
- Output Frequency (not synced): 50/60 Hz +/-1 Hz
- Topology: Line Interactive
- Waveform type: Stepped approximation to a sinewave
- Output Connections: (6) IEC 320 C13 (Battery Backup)
- Transfer Time: 6ms typical : 10ms maximum
Input
- Nominal Input Voltage: 230V
- Input frequency: 50/60 Hz +/- 5 Hz (auto sensing)
- Input Connections: IEC-320 C14
- Cord Length: 5ft (1.52meters)
- Number of Power Cords: 1
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power...

Complete protection
- During a power outage, the Eaton 3S provides emergency power via the battery and extended overvoltage protection to prevent damage from lightning strikes or mains surges.
Modern application and easy integration
- The compact and attractive design with a high-gloss surface fits perfectly into any modern living or office environment.
- To facilitate installation, a wall mounting system is implemented in all models.
Don't worry
- The surge protection complies with the international standard IEC 61643-11.
- The 10 A circuit breaker protects your equipment against overload.
Comprehensive protection for:
- Computers, peripherals and multimedia
- TV, video and hi-fi equipment: Home theater equipment, NAS, digital decoders, etc.
- Router
- Game consoles
- Broadband modems (Internet and TV) and IP telephones
- Household goods, etc.

ZINTO UPSs can help prevent critical data loss and costly downtime. The Buck & Boost function compensates for voltage fluctuations and protects the connected devices from damage. Programmable outputs enable the selective switching off of individual loads and thus increase the bridging time.
Comprehensive features of the Datawatch software (free download) enable in-depth analysis of the power supply as well as the shutdown of connected computers. The expansion up to a multiserver shutdown or shutdown is possible in a freely definable sequence via the appropriate adapter and software.
The ZINTO UPSs convince by their diverse applications. In addition to its field of application for securing servers, backup systems, routers/firewalls, telecommunications systems as well as UCC/video conference systems and private/public cloud equipment, ZINTO also convinces with its security in the medical field, such as in the case of blood sample analyzers. In this area, a UPS must be particularly reliable. If the power supply was interrupted during the analysis process, all samples would be unusable.
- 800VA, typ. 14 Minutes Of Bridging Time
- Classification Security level VI.
- DYNAMIC power TECHNOLOGY for optimal efficiency
- Buck & Boost function for effective voltage regulation
- Silent Normal Operation
- Rack-Tower Combo Model
- Hot-swap battery replacement during operation
- Surge protection for data & telephone lines
- RS232 and USB interface
- Emergency Stop Interface
- Slot for optional SNMP adapter or AS400/relay card
- Switchable Output Sockets

SMX Series Smart-UPS Rack/Tower 48.3cm (19''), 800W / 1000 VA
Inputs
- 1x IEC 320 C14
Outputs
- 8x IEC 320 C13
- 2x IEC jumpers
This product is part of the Smart-UPS series, an intelligent and efficient line power protection offering from entry-level to scalable runtime.
This high quality and reliable 1000 VA / 800 W line-interactive UPS offers pure sine wave and scalable runtimes for critical applications.
The convertible (rack/tower) 2U SMX UPS has the ability to integrate a network management card for network-based monitoring and PowerChute Business Edition for unattended shutdown...
Advanced power protection for servers and network equipment
- Intuitive LCD user interface
- Display of battery replacement date
- Pure sinusoidal output signal in battery mode
- Battery failure notification
- Hot-swappable batteries
- Intelligent battery management
Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.
Supports cold start
- Allows temporary battery operation when the mains supply fails
- Energy consumption meter
- Indication of usage in kilowatt hours for energy-conscious users.
- EPO (Energy Power-Off)
The instrument can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.
Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.
High frequency design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.
High online efficiency
- Reduces power costs, generates less waste heat
- Intuitive LCD user interface
Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.
Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.
External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.
Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.
Pure...

The FP Line-Interactive UPS series offers stable and reliable protection with scalable run-time.
An ideal solution for PC users, small businesses and small telecom applications.
The integrated microprocessor controller guarantees high reliability.
With simulated sine wave and cold start function the FP series is an excellent choice.
Output:
- Voltage: 220V nominal
- Frequency: 50 Hz / 60 Hz ±1 Hz
- Transfer time: typically 2-6 ms
- Curve progression (Batt. mode): Simulated sine wave
- Battery type & quantity: 12V / 9 Ah x 1
- Slots: 2x protective contact socket
Input:
- Voltage range: 81-145 / 162-290 VAC
- Frequency: 60 / 50 Hz (auto sensing)
Characteristics:
- Excellent microprocessor control guarantees high reliability
- Boost-Buck voltage converter for stable voltage
- Automatic restart during AC recovery
- Compact size
- Simulated sine wave
- Off-mode loading
- Cold start function

A compact size with stand and mounting flexibility Off line UPS to provide the expected backup power for home, gaming or personal appliances.
- 800VA standby UPS
- Compact size for standalone and mounting flexibility
- Excellent microprocessor control ensures high reliability
- Automatic restart during AC recovery
- Simulated sine wave output
- Cold start function
Input
- 220 / 230 / 240 V AC
Output
- 220 / 230 / 240 V AC
- 6x protective contact
- 2x USB-A (5 V / 1 A)
- 1x RJ-11 (data line protection)
- 1x RJ-45 (data line protection)
- 1x USB (data line protection)

The Nano UPS provides comprehensive protection in a compressed and efficient form.
The Nano UPS is compact and offers comprehensive protection against power failure or power peaks.
With Nano the power supply can be continued reliably, a safe shutdown of your pc during a power failure is possible.
The integrated microprocessor control guarantees high reliability.
Output:
- Slots: 2 x protective contact
- Voltage: 220 V nominal
- Frequency: 50 / 60 Hz
- Transfer time: typically 2-6 ms
- Curve progression (Batt. mode): Simulated sine wave
- Battery: 12 V / 9 AH x 1
Input:
- Slots: 1x IEC C14
- Input voltage: 180 ~ 270 V AC
- Frequency: 50 / 60 Hz
Characteristics:
- Compact size with stand and mounting flexibility
- Excellent microprocessor control guarantees high reliability
- Automatic restart during AC recovery
- Simulated sinusoidal curve
- cold start function
- Complete protection: discharge, overcharge, short circuit and thermal protection

This mini-UPS is a powerful power bank for you as a home office employee, freelancer, self-employed and as a private person.
UPS systems prevent current-related data loss and ensure an uninterruptible power supply (UPS).
Annoying disconnections of important telephone calls and video conferences are a thing of the past.
The YUNTO Smile UPS reliably protects your networked devices in the home office and electronic devices in the private environment against mains disturbances and failure of the 230V power supply.
With an emergency power supply with overvoltage protection, the mini UPS offers you failure protection and reliably secures your remote workstations and devices.
Protected:
- Computer/PC and notebooks
- Router of telecommunication systems (TK) and modem
- docking station
- External storage systems for data backup
- NAS systems
- Access points and DECT telephones
- Electronic Systems
- Game consoles
In the event of a faulty or completely interrupted mains connection, YUNTO Smile UPSs continue to supply all connected devices reliably with power.
For protection, the mini UPS is simply plugged in between the socket and the device.
Via a UPS charging connection, the YUNTO Smile UPS can be used as a power bank.
In the LCD - display important information such as input and output voltage or the battery condition can be called up fast and comfortably over the status display.
Thanks to the easy handling and integrated protective contact sockets, the mini UPS YUNTO Smile is ideal for use in your home office and at home in a private environment.
- Nominal power: 800 VA / 480 W
- Bridging time at 50 % load: 2,5 min

- Compact size
- Excellent microprocessor control ensures high reliability
- Boost and buck AVR for voltage stabilization
- Automatic restart on AC recovery
- Simulated sine wave output
- Off-mode charging
- Cold start function
Input
- 220 / 230 / 240 V AC
Output
- 220 / 230 / 240 V AC
- 3x protective contact

- Compact size
- Excellent microprocessor control ensures high reliability
- Boost and buck AVR for voltage stabilization
- Automatic restart upon AC recovery
- Provides simulated sine wave backup power to protect electrical equipment
- Off-mode charging
- Cold start function
- Generator compatible
Input
- 220 / 230 / 240 V AC
Output
- 220 / 230 / 240 V AC
- 2x protective contact
- 1x USB
- 2x RJ45

Smart and efficient solution for uninterruptible power supply of network systems, selection from entry-level to models with scalable autonomy time.
Ideal UPS for servers, POS systems, routers, switches, hubs and other devices.
Input Connections
- 1x IEC 320 C14
Output connection type
- 8x IEC 320 C13
- 2x IEC jumpers
Advanced power protection for servers and network equipment
- Intuitive LCD user interface
- Display of battery replacement date
- Pure sinusoidal output signal in battery mode
- Battery failure notification
- Hot-swappable batteries
- Intelligent battery management
Automatic detection of external batteries
UPS system detects the connection of external battery modules and automatically updates the autonomy time.
Supports cold start
Allows temporary battery operation when the mains supply fails.
Energy consumption meter
Indication of usage in kilowatt hours for energy-conscious users.
EPO (Energy Power-Off)
The device can be connected to an EPO (Emergency Power Off) system so that it is automatically switched off in an emergency situation.
Green operating mode
Patent-pending operating mode that shuts down unused electrical components when power conditions are good, allowing very high operating efficiency without sacrificing safety.
High Frequency Design
Reduces or eliminates the need for bulky transformers, making equipment lighter and easier to handle.
High on-line efficiency
Reduces power costs, generates less waste heat.
Intuitive LCD user interface
Easy-to-read interface with accurate information in multiple languages and support for on-site UPS configuration with user-friendly navigation buttons.
Group switchable outputs
Multiple output groups for separate control via the UPS system for targeted restart of unresponsive systems, sequential startup or shutdown of systems, or shutdown of non-critical loads.
External plug-and-play batteries
Ensures uninterrupted supply of clean power to connected equipment during installation of runtime extension modules.
Battery replacement date display
Dynamic display of recommended battery replacement date in month and year facilitates long-term maintenance planning.
Pure sinusoidal output signal in battery mode
Simulates mains power supply for the highest possible compatibility with servers and sensitive electronic systems with active power factor correction.
Combination Rack/Tower
Protects existing UPS investments when moving from a tower to a...

The UPS has a USB interface, which guarantees together with the standard shutdown, monitoring and management software DataWatch proper and safe shutdown.
New to YUNTO is the increased performance with up to 1500VA. In addition, now all YUNTO models offer the practical, integrated in the housing wall bracket.
ONLINE UPS systems warrants all YUNTO models 2 years warranty incl. Battery and a 24-hour advance replacement.
- Line interactive technology with simulated sinusoidal output voltage
- noiseless
- Compact design, only 80 x 178 x 232mm
- Intelligent battery management, self-testing and quick-charging function
- Surge protection for data and phone lines
- alarm function
- USB interface
- Includes shutdown, management and monitoring software Data Watch for all operating systems (WIN, LINUX, UNIX, MAC, etc.)
- Integrated, practical wall mount