Review Digitus digi dn 81223 kabel sfp twinax 3 m

DIGITUS "DIGI DN-19-DIN3U - 19"" DIN Rail Holder, 3U" 80.18 EUR "483 mm (19"") DIN Rail Holder, 3U

For mounting of DIN rail equipment
Incl. mounted DIN rail (HxW= 35x390 mm)
Rear side with cut-out for optimized cabling (HxW= 40x35 mm) and air ventilation slots

The 483 mm (19"") DIN Rail Holder makes the installation of suitable equipment on the already mounted 390 mm width DIN rail possible. A cut-out out of 40x35 mm on the rear side can be used for optimized cabling.

Technical details

1,5 - 2,0 mm strong steel sheet, powder coated

Package content:

Installation set (screws, cage nuts, washers)

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-96332-3 - Fiber Optic Splice Box, 1U, Equipped, 24x LC DX, OM3 175.28 EUR "Fiber Optic Splice Box, Equipped, LC, OM3
FO splice box, 1U, equipped, 24x LC DX, OM3,incl. splice cassette, colored pigtails, couplers

Technical details

Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s)
Colored pigtails
Couplers with zirconia ceramic ferrule
Couplers in polymer housing
Carrier housing made of 1.0 mm steel sheet, varnished
1 height unit (44.45 mm)
483mm width (19"")
240mm depth
M20/M25 screw, cassette, cassette cover and strain relief included
Sliding

"

SEE OFFER SEE OFFER ebay

LANCOM SYSTEMS LANCOM DAC403 - Twinax SFP+ connector > connector 3 m cable 215.64 EUR "LANCOM SFP module

The LANCOM SFP modules for the fibre-optic networking of network components at Gigabit speed are suitable for the SFP ports of all the switches, routers and unified firewalls listed below.

Cable length: 3 m
Up to 40 Gbps link speed
Full-duplex mode
Operating temperature 0°C - 70°C
Can be swapped out during system operation

Flexible connections for your switches, routers and firewalls!
LANCOM switches, routers and firewalls with integrated SFP ports are characterised by their utmost flexibility.
Whether for fast fibre-optic networking or as copper-bound Ethernet port: LANCOM SFP modules provide the specialised connections you need for your LANCOM device.
LANCOM SFP modules offer the best connections and highest reliability thanks to the tried-and-tested compatibility with LANCOM products."

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-948030-1 - FTTx installation kit, 4-core, LC/APC, pre-assembled, 30 m 36.77 EUR "Fttx installation kit, pre-assembled, 4-fiber, LC/APC connector, length 30 m

The compact FTTH kit with pre-assembled fiber optic installation cable on one side is ideal for installing high-speed fiber optic connections within the home for network level 4.

Short installation time within the residential unit
FTTH drop cables are already assembled with LC/APC connectors on one side
The open end can simply be pulled in or laid up to the house distribution board
Surface mounting of the box for optimized, secure installation of patch cables
Integrated, captive laser protection on the LC APC couplings
Sturdy pulling eye for pulling the cable into conduit systems

The growing demand to extend the fiber optic network into the home requires products that enable simple and efficient installation of this network. The Digitus FTTH installation kit is a solution that makes it easy to extend and complete the fiber optic network in the home. The simplicity of the installation results from the fact that the product is supplied with all the necessary components, thus eliminating the need to search for the components for the installation individually. The junction box can be mounted in the designated location and connection to the router is made easier as the LC/APC connectors are already included. The integrated fiber drop cable can then be pulled to make the connection to the house handover point, which is mounted in the building as the entry point for the fiber network. It provides additional connections and splicing options to meet the requirements for scaling the number of fiber connections.

Technical details

FTTH junction box :
Junction box for FTTH applications
2x LC-APC duplex fiber optic coupler with shutter
The shutter of the clutch protects against lasers and dust
Adapter type : LC/APC Duplex
Number of ports: 4
Number of equipped ports: 2
Integrated splice cassette
Dimensions (H*W*D) : 80 x 80 x 28 mm
Color : White
Weight : 60 g
Working temperature : -40 - + 65 C
Material: ABS
FTTH drop cable :
4 fibres 9/125µm G.657A2 bend-optimized
Cable diameter : 2.0mm
900µm buffer, easily removable
Aramid strain relief
LSOH outer sheath, color white
Cable structure: I-V(ZN)H
CPR Classification : Dca
Operating and storage temperature (? ) : -15 - +70
Installation Temperature range (? ) : -10 - +60

Package content:

Fttx installation kit, pre-assembled, 4-fiber, LC/APC connector, length 30m
Mounting accessories (screws and dowels)

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-948030-2 - FTTx installation kit, 4-fiber, LC/APC, pre-terminated, 30 m 46.12 EUR "DIGITUS FTTx Installation Kit, Pre-assembled, 4-fiber, LC/APC connectors, length 30 m

FTTx installation kit, SM G657A2, 30 m LSZH CPR B2ca, one end 4F LC/APC, one end unterminated

The compact FTTH kit, featuring a fiber optic installation cable pre-terminated at one end, is ideal for installing high-speed fiber optic connections within the home-specifically for what is known as Network Level 4.

Quick installation time within the living unit
FTTH drop cables come pre-terminated with LC/APC connectors on one end
The unterminated end can be easily pulled through or routed to the building distribution point
Surface-mounted outlet for an optimized, secure patch cable installation
Integrated, captive laser protection on the LC/APC adapters
Sturdy pulling eye for drawing the cable through conduit systems

The growing demand for extending fiber-optic networks into the home calls for products that facilitate simple and efficient installation. The Digitus FTTH installation kit offers a solution for easily extending and completing in-home fiber-optic networks. Installation is simplified because the product comes with all necessary components, eliminating the need to source individual parts separately.
The connection box can be mounted at the designated location, and connecting to the router is made easier by the inclusion of pre-installed LC/APC connectors.
The integrated fiber-optic drop cable can then be routed to establish a connection to the building entry point (BEP), which serves as the network's entry point into the building. This unit provides additional connection and splicing options to accommodate the need to scale the number of fiber-optic connections.

Technical details:

FTTH wall outlet suitable for wall and DIN-rail mounting
2x LC-APC duplex fiber optic adapters with shutters
Adapter shutters provide protection against laser light and dust
Adapter type: LC/APC duplex
Number of ports: 4
Number of populated ports: 2
Integrated splice tray
Smooth cable unspooling
4 fibers, 9/125µm G.657A2 (bend-optimized)
Cable diameter: 2.0 mm
900µm buffer, easy to strip
Aramid strain relief
LSOH outer jacket, white
Cable construction: I-V(ZN)H
CPR class: B2ca

Scope of delivery:

FTTx installation kit, pre-assembled, 4-fiber, LC/APC connectors, length 30 m
Mounting accessories (screws and wall plugs)

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-948070-1 - FTTx installation kit, 4-core, LC/APC, pre-assembled, 70 m 45.04 EUR "Fttx installation kit, pre-assembled, 4-fiber, LC/APC connector, length 70m

The compact FTTH kit with pre-assembled fiber optic installation cable on one side is ideal for installing high-speed fiber optic connections within the home for network level 4.

Short installation time within the residential unit
FTTH drop cables are already assembled with LC/APC connectors on one side
The open end can simply be pulled in or laid up to the house distribution board
Surface mounting of the box for optimized, secure installation of patch cables
Integrated, captive laser protection on the LC APC couplings
Sturdy pulling eye for pulling the cable into conduit systems

The growing demand for extending the fiber optic network into the home requires products that enable simple and efficient installation of this network. The Digitus FTTH installation kit is a solution that makes it easy to extend and complete the fiber optic network in the home. The simplicity of the installation results from the fact that the product is supplied with all the necessary components, thus eliminating the need to search for the components for the installation individually. The junction box can be mounted in the intended location and connection to the router is made easier as the LC/APC connectors are already included. The integrated fiber drop cable can then be pulled to make the connection to the house handover point, which is mounted in the building as the entry point for the fiber network. It provides additional connections and splicing options to meet the requirements for scaling the number of fiber connections.

Technical details

FTTH junction box :
Junction box for FTTH applications
2x LC-APC duplex fiber optic coupler with shutter
The shutter of the clutch protects against lasers and dust
Adapter type : LC/APC Duplex
Number of ports: 4
Number of equipped ports: 2
Integrated splice cassette
Dimensions (H*W*D) : 80 x 80 x 28 mm
Color : White
Weight : 60 g
Working temperature : -40 - + 65 C
Material: ABS
FTTH drop cable :
4 fibres 9/125µm G.657A2 bend-optimized
Cable diameter : 2.0mm
900µm buffer, easily removable
Aramid strain relief
LSOH outer sheath, color white
Cable structure: I-V(ZN)H
CPR Classification : Dca
Operating and storage temperature (? ) : -15 - +70
Installation Temperature range (? ) : -10 - +60

Package content:

Fttx installation kit, pre-assembled, 4-fiber, LC/APC connector, length 70m
Mounting accessories (screws and dowels)

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-93821 - Empty box with front panel for 3x Keystone modules 13.77 EUR "Wallplate for Keystone Modules, German type, middle plate 50x50 mm, frame 80x80 mm
The DIGITUS® Faceplates are suitable for the connection of all shielded DIGITUS® Keystone Modules. Included dust protection shutters provide a perfect protection. Their connection way of the module is 45° vertical (German and British Layout) or 90° horizontal (French Layout).

Technical details

Layout keystone entry: 45° outlet
Area of application: Cavity socket, trunking, surface mount box
Norms: ISO/IEC 11801 3rd Ed., EN 50173-1, EIA/TIA 568-C
General properties:
Suitable for installation in trunking, flush and surface mount
Central ground connection
Integrated dust cover
Plastic label field
Design compatible with spacer ring to current switch ranges of switch manufacturers
Technical properties:
Wall outlet material: Die-cast metal
Central plate material: ABS UL 94V-0
Frame material: ABS UL 94V-0
Surface mount box material: ABS UL 94V-0
Physical properties:
Operation temperature: -20° C to +70 °C (ISO/IEC 11801, EN 50173-1, ANSI/TIA/EIA 568 C)
Colour: White RAL9003

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81221 - Kabel SFP+ Twinax 1 m 30.57 EUR "SFP+ 10G 1m DAC cable

Extend your copper connections

SFP+ 10G 1m DAC cable
AWG 30 Twinax cable
1.0625-10.52Gbps supported data rate

The Digitus® SFP+ 10G DAC cables are the ideal connection between switches in the backbone area. The SFP+ 10G DAC cables support the following data rates and applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8. The SFP+ 10G DAC cables are compatible with all leading switch manufacturers.

Technical details

AWG 30 Twinax cable
1 m maximum distance
1.0625-10.52Gbps supported data rate
Supported applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8
Compatible with the following manuafacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
DDM / DOM support
Temperature range: 0 ~ 70 °C
Ports: SFP +
Power: + 3.3V supply voltage
Power consumption: 0.5W
Transceiver type: DAC

Package content:

SFP+ 10G 1m DAC cable
Quick start guide

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81226 - Kabel SFP+ Twinax 10 m 71.92 EUR "SFP+ 10G 10m DAC cable

Extend your copper connections

SFP+ 10G 10m DAC cable
AWG 24 Twinax cable
1.0625-10.52Gbps supported data rate

The Digitus® SFP+ 10G DAC cables are the ideal connection between switches in the backbone area. The SFP+ 10G DAC cables support the following data rates and applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8. The SFP+ 10G DAC cables are compatible with all leading switch manufacturers.

Technical details

AWG 24 Twinax cable
10 m maximum distance
1.0625-10.52Gbps supported data rate
Supported applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8
Compatible with the following manuafacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
DDM / DOM support
Temperature range: 0 ~ 70 °C
Ports: SFP +
Power: + 3.3V supply voltage
Power consumption: 0.5W
Transceiver type: DAC

Package content:

SFP+ 10G 10m DAC cable
Quick start guide

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81220 - Kabel SFP+ Twinax 0,5 m 29.54 EUR "SFP+ 10G 0.5m DAC cable

Extend your copper connections

SFP+ 10G 0.5m DAC cable
AWG 30 Twinax cable
1.0625-10.52Gbps supported data rate

The Digitus® SFP+ 10G DAC cables are the ideal connection between switches in the backbone area. The SFP+ 10G DAC cables support the following data rates and applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8. The SFP+ 10G DAC cables are compatible with all leading switch manufacturers.

Technical details

AWG 30 Twinax cable
0.5 m maximum distance
1.0625-10.52Gbps supported data rate
Supported applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8
Compatible with the following manuafacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
DDM / DOM support
Temperature range: 0 ~ 70 °C
Ports: SFP +
Power: + 3.3V supply voltage
Power consumption: 0.5W
Transceiver type: DAC

Package content:

SFP+ 10G 0.5m DAC cable
Quick installation guide

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81224 - Kabel SFP+ Twinax 5 m 48.14 EUR "SFP+ 10G 5m DAC cable

Extend your copper connections

SFP+ 10G 5m DAC cable
AWG 24 Twinax cable
1.0625-10.52Gbps supported data rate

The Digitus® SFP+ 10G DAC cables are the ideal connection between switches in the backbone area. The SFP+ 10G DAC cables support the following data rates and applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8. The SFP+ 10G DAC cables are compatible with all leading switch manufacturers.

Technical details

AWG 24 Twinax cable
5 m maximum distance
1.0625-10.52Gbps supported data rate
Supported applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8
Compatible with the following manuafacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
DDM / DOM support
Temperature range: 0 ~ 70 °C
Ports: SFP +
Power: + 3.3V supply voltage
Power consumption: 0.5W
Transceiver type: DAC

Package content:

SFP+ 10G 5m DAC cable
Quick start guide

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81225 - Kabel SFP+ Twinax 7 m 54.34 EUR "SFP+ 10G 7m DAC cable

Extend your copper connections

SFP+ 10G 7m DAC cable
AWG 24 Twinax cable
1.0625-10.52Gbps supported data rate

The Digitus® SFP+ 10G DAC cables are the ideal connection between switches in the backbone area. The SFP+ 10G DAC cables support the following data rates and applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8. The SFP+ 10G DAC cables are compatible with all leading switch manufacturers.

Technical details

AWG 24 Twinax cable
7 m maximum distance
1.0625-10.52Gbps supported data rate
Supported applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8
Compatible with the following manuafacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
DDM / DOM support
Temperature range: 0 ~ 70 °C
Ports: SFP +
Power: + 3.3V supply voltage
Power consumption: 0.5W
Transceiver type: DAC

Package content:

SFP+ 10G 7m DAC cable
Quick start guide

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81222 - Kabel SFP+ Twinax 2 m 33.67 EUR "SFP+ 10G 2m DAC cable

Extend your copper connections

SFP+ 10G 2m DAC cable
AWG 30 Twinax cable
1.0625-10.52Gbps supported data rate

The Digitus® SFP+ 10G DAC cables are the ideal connection between switches in the backbone area. The SFP+ 10G DAC cables support the following data rates and applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8. The SFP+ 10G DAC cables are compatible with all leading switch manufacturers.

Technical details

AWG 30 Twinax cable
2 m maximum distance
1.0625-10.52Gbps supported data rate
Supported applications: 10G Ethernet (10.21 Gbps), 10G fiber channel (10.52 Gbps), 8G fiber channel (8.5 Gbps), 4G fiber channel (4.25 Gbps), 2G fiber channel (2.125 Gbps), 1G fiber channel (1.0625 Gbps), Gigabit Ethernet (1.25 Gbps), CPRI option 2,3,5,6,7,8, OBSAI RP3 x 2, RP3 x 4, RP x 8
Compatible with the following manuafacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL
DDM / DOM support
Temperature range: 0 ~ 70 °C
Ports: SFP +
Power: + 3.3V supply voltage
Power consumption: 0.5W
Transceiver type: DAC

Package content:

SFP+ 10G 2m DAC cable
Quick start guide

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81243 - cable Twinax, SFP28, 3 m 61.58 EUR "SFP28 25G 3m DAC Cable

The SFP28 25G cable is suitable for connections between two SFP28 ports in 25G network components

3 m maximum distance
AWG 30 Twinax Cable
data rates of up to 25.88 Gbps supported
Hot-plug capable SFP 20 PIN connection
Temperature range: 0 to 70°C
Improved pluggable form factor (IPF)
Power: +3.3 V supply voltage
Compatible with the SFF-8432 specifications

25G SFP28 DAC Twinax cables are a powerful, energy-saving solution for 25G Ethernet applications, switches, high-performance computer, data acquisition systems and telecommunications systems. It consists of a shielded Twinax copper cable with pluggable connections on both ends. Passive DAC cables have no electrical components in the cable and are suitable for short transmission distances.

Technical details

Transmission channels: RX and TX
Connections: SFP28
data rates of up to 25.88 Gbps supported
Temperature range: 0 to 70°C
Storage temperature range: -40 to 85°C
Power: +3.3 V supply voltage
Power consumption: 0.5 W
Compatible with MSA SFP28
Electrical interface: 20-pole connector plug
Management interface: Serial, I²C
The connection is compatible with the SFF-8432 specification
Compatible with the following manufacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL

Package content:

SFP28 25G DAC Cable 3 m

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81325 - Breakout cable QSFP+ > 4x SFP+, 5 m 123.6 EUR "40G QSFP+ to 4XSFP+ Direct Attach Cable 5m

Up to 10. 3125Gbps data rate per channel, Up to 5m transmission, Operating temperature: 0?~70?, Single +3.3V power supply

Up to 10. 3125Gbps data rate per channel
Operating temperature: 0?~70?
Single +3.3V power supply
40G Ethernet
Compliant with SFF- 8436,
SFF-8431, SFF-8432,SFF-8472
Supports 40G to 4x 10G Ethernet interoperability
Cable length: 5m

The DN- 81325 Breakout DAC cables QSFP+ to 4xSFP+ is optimized to be used in Datacenter. They meet the ever increasing demand for higher channel density with high-level signal integrity in high performance computing, core switches and NAS Systems.

Technical details

Channel Data Rate 10.3125 Gbps
Operating Temperature 0 to + 70°C
Storage Temperature -40 to + 85°C
Supply Voltage 3.3 V nominal
Electrical Interface 38 pins edge connector(QSFP+)
20 pins edge connector(SFP+)
Management Interface Serial, I2C
Cable length: 5m
Compatible with the following manufacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL

Package content:

40G QSFP+ to 4XSFP+ Direct Attach Cable 5m

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81321 - Breakout cable QSFP+ > 4x SFP+, 1 m 61.58 EUR "40G QSFP+ to 4XSFP+ Direct Attach Cable 1m

Up to 10. 3125Gbps data rate per channel, Up to 5m transmission, Operating temperature: 0?~70?, Single +3.3V power supply

Up to 10. 3125Gbps data rate per channel
Operating temperature: 0?~70?
Single +3.3V power supply
40G Ethernet
Compliant with SFF- 8436
Supports 40G to 4x 10G Ethernet interoperability
Cable length: 1m
Cable length: 1m

The DN- 81321 Breakout DAC cables QSFP+ to 4xSFP+ is optimized to be used in Datacenter. They meet the ever increasing demand for higher channel density with high-level signal integrity in high performance computing, core switches and NAS Systems.

Technical details

Channel Data Rate 10.3125 Gbps
Operating Temperature 0 to + 70°C
Storage Temperature -40 to + 85°C
Supply Voltage 3.3 V nominal
Electrical Interface 38 pins edge connector(QSFP+)
20 pins edge connector(SFP+)
Management Interface Serial, I2C
Cable length: 1m
Compatible with the following manufacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL

Package content:

40G QSFP+ to 4XSFP+ Direct Attach Cable 1m

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81322 - Breakout cable QSFP+ > 4x SFP+, 2 m 82.25 EUR "40G QSFP+ to 4XSFP+ Direct Attach Cable 2m

Up to 10. 3125Gbps data rate per channel, Up to 5m transmission, Operating temperature: 0?~70?, Single +3.3V power supply

Up to 10. 3125Gbps data rate per channel
Operating temperature: 0?~70?
Single +3.3V power supply
40G Ethernet
Compliant with SFF- 8436,
SFF-8431, SFF-8432,SFF-8472
Supports 40G to 4x 10G Ethernet interoperability
Cable length: 2m

The DN- 81322 Breakout DAC cables QSFP+ to 4xSFP+ is optimized to be used in Datacenter. They meet the ever increasing demand for higher channel density with high-level signal integrity in high performance computing, core switches and NAS Systems.

Technical details

Channel data rate 10.3125 Gbps
Operating temperature 0 to + 70°C
Storage temperature -40 to + 85°C
Supply voltage 3.3 V nominal
Interface: 38-pin connector (QSFP+)
20-pin connector (SFP+)
Management interface Serial, I2C
Compatible with the following manufacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL

Package content:

40G QSFP+ to 4XSFP+ Direct Attach Cable 2m

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI 55343 - HDMI extender set, wireless, 4K 120 Hz, 30 m 101.94 EUR "HDMI extender set, USB-C to HDMI, 4K/120 Hz CAT 6, 30 m

Technical details:

Maximum transmission distance: 30 m
Supports CAT 6 network cables or higher
USB-C 3.1 - signal source connection
HDMI - output display connection
Max. resolution: 4K/120 Hz (4:4:4)
Video bandwidth: 32 Gbps
Supports High Dynamic Range (HDR)
Supports HDCP 2.3
Supports Deep Color (36-bit)
Power supply transmitter via host, receiver via USB-C cable (enclosed)
EDID and HDCP bypass
Supports compressed (e.g. DTS, Dolby Digital etc.) and uncompressed audio formats (e.g. LPCM etc.)
Digital Stream Conversation (DSC) compatible with DSC 1.2a
Transmitter connections:
1x USB-C 3.1 (cable length 20 cm) - signal source
1x RJ45 - CAT 6 or higher
Receiver connectors:
1x HDMI - output display
1x RJ45 - CAT 6 or higher
Operating temperature: 0 - 70°
Power consumption: approx. 5 W
Housing: aluminium
Dimensions (housing): transmitter L 9.3 x W 3.4 x H 1.5 cm, receiver L 7.2 x W 3.4 x H 1.5 cm
Weight: transmitter 53 g, receiver 36 g
Colour: black

"

SEE OFFER SEE OFFER ebay

TP-LINK TPLINK TLSM52203 - Kabel SFP+ Twinax 3m 48.18 EUR "3 Meter 10G SFP+ Direct Attach Cable

3 m Cable Length
10G SFP+ connector on both sides

With a passive twin-ax cable assembly of 3 meter and two SFP+ connectors on each side, TL-SM5220-1M is suitable for short distances and offers a cost-effective way to connect within racks and across adjacent racks."

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81601 - cable, QSFP28 1 m 77.08 EUR "100G QSFP28 DAC Cable 1m, AWG 30

100G QSFP28 DAC cable, 1 m AWG30

100G QSFP28 DAC cable, 1m
Maximum data transfer rate: 100 Gb/s ( 4x 25 Gb/s)
100G QSFP28 to QSFP28
AWG 30, full duplex channels
Maximum supported data rate per channel 28.3125 Gbps
The connector is compatible with the SFF-8665 specification
Power: + 3.3V supply voltage
AWG: 30
Compatible with the following manufacturers: Allnet, CISCO, 3COM, D-LINK, Dell, Edimax, Etherwan, ENTERASYS, EXTREME, FINISAR, FORCE 10, Fortinet, HUAWEI, IBM, JUNIPER, LINKSYS, NETGEAR, NORTEL, RIVERSTONE, ZTE, ZYXEL

The Digitus® QSFP28 100G DAC cables are the ideal connection between switches in the backbone area. The 100G QSFP28 to QSFP28 Direct Attach Cable copper cable assemblies(DAC) are a low cost alternative for short reach applications. It is compliant with 100G Ethernet (100GBASE-CR4) specifications. It contains four high-speed copper pairs, each operating at data rates of up to 25GbE. So the QSFP28 DAC cable assembly is suitable for power-efficient connectivity for short distance interconnects, such as Data center, enterprise storage systems and High-Performance Computing.
Package content:

QSFP28 100G DAC cable 1m

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-96320-3 - Fiber Optic Splice Box, Equipped, SC, OM3 82.25 EUR "Fiber Optic Splice Box, Equipped, SC, OM3
FO splice box, 1U, equipped, 6x SC DX, OM3,incl. splice cassette, colored pigtails, couplers

Technical details

Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s), crimp splice holders
Colored pigtails
Couplers with zirconia ceramic ferrule
Couplers in polymer housing
Carrier housing made of 1.0 mm steel sheet, varnished
1 height unit (44.45 mm)
483mm width (19"")
240mm depth
M20/M25 screw, cassette, cassette cover and strain relief included
Sliding

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-96321-3 - Fiber Optic Splice Box, Equipped, SC, OM3 123.6 EUR "Fiber Optic Splice Box, Equipped, SC, OM3
FO splice box, 1U, equipped, 12x SC DX, OM3,incl. splice cassette, colored pigtails, couplers

Technical details

Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s), crimp splice holders
Colored pigtails
Couplers with zirconia ceramic ferrule
Couplers in polymer housing
Carrier housing made of 1.0 mm steel sheet, varnished
1 height unit (44.45 mm)
483mm width (19"")
240mm depth
M20/M25 screw, cassette, cassette cover and strain relief included
Sliding

"

SEE OFFER SEE OFFER ebay

TP-LINK TPLINK TLSM52201 - Kabel SFP+ Twinax 1m 39.91 EUR "1 Meter 10G SFP+ Direct Attach Cable

1 m Cable Length
10G SFP+ connector on both sides

With a passive twin-ax cable assembly of 1 meter and two SFP+ connectors on each side, TL-SM5220-1M is suitable for short distances and offers a cost-effective way to connect within racks and across adjacent racks."

SEE OFFER SEE OFFER ebay

DIGITUS "DIGI DN-19 SET - Fixing set for 483 mm (19'') and 254 mm (10"") components, M6" 21.27 EUR "Fixing set for 483 mm (19'') and 254 mm (10"") components, M6

Set of 50 pieces of screws, cage nuts and washers in the size M6

The DIGITUS® mounting kit includes a set of 50 pieces of screws, cage nuts and washers in the size M6. Suitable for rack mountable components.

Technical details

Steel
Screws
Caged nuts
Set = 50 sets
Color black

Package content:

50 x screws, washers, cage nuts

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DK1644AP030 - Cat.6a patch cable, S/FTP, green, 3 m, PUR 18.73 EUR "CAT 6A S/FTP patch cord, PUR (TPU)

Best performance and link quality for your network. Ideal for industrial applications.

With PUR (Polyurethane) sheath for oil- and UV resistance
Molded boot with kink protection, strain relief and latch protection
Conductor: Copper (Cu)
PoE+ ready

The category 6A, S/FTP patch cords offer good reliability against oil with its PUR sheath. Therefore they are perfect for industrial applications. Further features of the PUR sheath are the UV resistance and the self-extinguishing fire behavior. DIGITUS Category 6A Class E A patch cords are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6 A specifications. They will guarantee the installed cabling system is compliantwith the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS Category 6A cabling. The performance is tested up to 500 MHz inclusive performance characteristics such as near end cross talk (""NEXT""). All patch cords are designed and produced to fulfill the highest requirements of various application areas in full volume. Each cable is fitted with a molded boot which comes with kink protection and strain relief. Furthermore the boot is equipped with a latch protection that prevents the latching lever against breaking.

Technical details

2x RJ45 (8P8C) connectors
Boots with kink protection, strain relief and latch protection
Length marking on boot
Conductor: Copper (Cu)

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI 510100025S - Audio cable, 3.5-mm stereo jack plug, 2.50 m 12.21 EUR "Audio connection cable, stereo 3.5 mm, 2.50 m, BC, 2x0.10/10, plug/plug, black

Technical details:

3.5-mm jack plug to 3.5-mm jack plug
Moulded housing
BC wire strands
Colour: black

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DK-2966-03 - Fiber optic patch cable, OS2, MPO, yellow, 3 m 71.92 EUR "Fiber Optic Patchcord, MPO, Female, OS2, Method A, 3m

High-performance solutions designed for efficient and scalable connectivity in data centers.

Enhanced data transfer rates
Ultra-Low Loss
Slim and flexible
Enables quick deployment
Robust design

The MPO patch cable allows datarates of 40Gb/s or 100Gb/s and is the answer of the needed growing bandwidths of datacenters. The standardized IEC61754-7 and TIA/EIA 604-5 MPO Plug guaranteed the best performance in the whole network and is hardly larger than an standard RJ45 plug. The excellent damping and the compact design makes this patch cable to the first choice, if we talk about bandwidth and performance.

Technical details

Connector : MPO female
Polish : APC
Type : Method A
Fibre type : SM-G652D, 9/125µ, OS2
Fiber Count : 12
Cable outer diameter : 3 mm
Sheath colour : Yellow
Cable length : 3 m
Outer sheath material : LSZH
Max. Tensile strength : 300 N
Min. bending radius : 30 mm
Temperature range : -40°C till +75°C

Package content:

1 x Fiber Optic Patchcord, MPO, Female, OS2, Method A, 3m

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DK-29333ASX - Fiber optic patch cable, simplex, LC/APC, G657.A02, SM, 3m 14.03 EUR "Fiber Optic simplex patch cable, Singlemode, LC/APC - LC/APC, 3 m

High-quality fibre simplex patch cables offer an excellent connectivity option for indoor and FTTx applications. The longetivity of cables is ensured by reliable connector performance.

High flexibility
Bend insensitive
High precision and low insertion loss
Compliant with G.657.A2

The single mode simplex fiber cable enables easier installation due to their bend insensitive characteristic. It is designed to transmit data with less attenuation when bent or twisted and as a result the cables are very efficient. Therefore, this makes the cable excellently suited for confined spaces. It is ideal for use in telecommunications, FTTx (FTTH, FTTB) applications and also gives more space for high-density cable installation requirements in enterprise networks, telecom rooms, server farms, horizontal and equipment distribution areas.

Technical details

Fiber type : Singlemode 9/125
Category : G657A2
Cable length : 3 m
Number of fibers: 1
Cable structure : Simplex
Connector 1 type : LC/APC
Connector 2 type : LC/APC
Maximum tractive force : 100 N
Cable type : I-V(ZN) H
Cable Ø : 2.0 mm
Minimum Bend Radius : 7.5 mm
Sheath color : Yellow
Jacket material : LSZH
Insertion loss 1310 nm : 0.3 dB
Working temperature : -20 - 70 °C
Storage temperature : -20 - 85 °C

Package content:

1 x Fiber Optic simplex patch cable, Singlemode, LC/APC - LC/APC, 3 m

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI 330124030S - Ultra High Speed HDMI cable, 3.0 m 19.15 EUR "HDMI Ultra High Speed connection cable, Type A plug/plug, 3.0 m, f/Ethernet, Ultra HD, 8K@60 Hz, gold, black

Technical details:

Supports up to 8K at 60 Hz
Support for 4K (3D) at 50/60 Hz
Support for 14- and 16-bit colour depth
Supports HDR (High Dynamic Range)
Supports audio return channel (ARC)
Supports Consumer Electronic Control (CEC)
Supports lip-sync (audio/video synchronisation)
Dolby TrueHD-capable
Multi-stream audio/video support
21:9 Cinemascope support
32-channel audio support
With Ethernet channel (HEC)
Supports 120 Hz at 1920 x 1080p resolution
Supports 4K 50/60 Hz
Supports 1080p 3D HFR
Supports 30-bit Deep Color
Supports DTS HD master audio bitstream
Supports Super Audio CD (DSD)
Supports DVD audio
Supports Blu-Ray disc and HD-DVD audio and video
HDMI
HDMI standard: Ultra High Speed HDMI

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DK2566034 - Fiber optic patch cable, OM4, MPO, violet, 3 m 81.73 EUR "Fiber Optic Patchcord, MPO, Female, OM4, Method A, 3m

High-performance solutions designed for efficient and scalable connectivity in data centers.

Enhanced data transfer rates
Ultra-Low Loss
Slim and flexible
Enables quick deployment
Robust design

The MPO patch cable allows datarates of 40Gb/s or 100Gb/s and is the answer of the needed growing bandwidths of datacenters. The standardized IEC61754-7 and TIA/EIA 604-5 MPO Plug guaranteed the best performance in the whole network and is hardly larger than an standard RJ45 plug. The excellent damping and the compact design makes this patch cable to the first choice, if we talk about bandwidth and performance.

Technical details

Connector: MPO female
Polish : PC
Type : Method A
Fibre type : MM 50/125 µ, OM4
Fiber Count : 12
Cable outer diameter : 3 mm
Sheath colour : Violet
Cable length : 3 m
Outer sheath material : LSZH
Max. Tensile strength : 300 N
Min. bending radius : 30 mm
Temperature range : -40°C till +75°C

Package content:

1 x Fiber Optic Patchcord, MPO, Female, OM4, Method A, 3m

"

SEE OFFER SEE OFFER ebay

DIGITUS "DIGI DN19BPN03SW - 19"" dummy panel, 3U, black" 20.23 EUR "Blank Panel for 483 mm (19"") Cabinets

Easy installation

The Blank Panels suit to all 483 mm (19"") profile rails of your network- or server cabinets. They are used to close non-used space within the 483 mm (19"") area. This has positive effects in aesthetic looks as well as optimited air ventilation performance.

Technical details

for installation on the 483 mm (19"") profile rails
sturdy steel sheet
incl. fixing material

Package content:

Installation set (screws, cage nuts, washers)

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-95452 - PDU, 24x C13, 3x C19 190.78 EUR "Basic IT PDU, 3-phase 16A, 24 x C13, 3 x C19, 3 m supply cable, IEC 60309 16 A plug

Safe and professional power distribution solution for highly demanding IT requirements in network and server racks

Optimal design for mounting in 19"" racks
Reliable power distribution
Excellent space management of the sockets
Integrated extraction protection at each output, protects C13 and C19 standard cables against unintentional unplugging
Color indication for each phase

The DIGITUS® PDU are the perfect solution for your network or server cabinet. With regard to power distribution, it fulfills the requirements of many applications in IT, network technology and laboratories. The individual C13 and C19 outlets are equipped with extract protection. It is optimally designed for vertical installation providing the advantage of saving rack spaces for more equipments. The 27 outlet PDU has excellent physical characteristics and is engineered for an output of up to 4,000 W (250 V AC / 16 A) which helps in achieving best performances with the appropriate load.

Technical details

Extraction protection at each output (for C13 and C19 standard cables)
Vertical installation
Housing: Aluminum
Plastic components made of ABS UL-94V-0
Mains plug: IEC60309 3ph/N/PE 6h, 230 V / 16 A plug
Cable: 3 m
Max. Load: 4000 W / 250 V AC / 16 A (50/60Hz)
Outlets: 24 x IEC60320 C13, 3 x IEC60320 C19
Output power: C13 (10A), C19 (16A)
Dimensions (L × W × D): 1288,5 x 45 x 60 mm
Colour: Black

Package content:

Scope of delivery: 1 socket strip, 1 safety instructions

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-95450 - PDU, 24x C13, 3x C19 159.77 EUR "Basic IT PDU, 1-phase 16A, 24 x C13, 3 x C19, 3 m supply cable, IEC 60309 16 A plug

Safe and professional power distribution solution for highly demanding IT requirements in network and server racks

Optimal design for mounting in 19"" racks
Reliable power distribution
Excellent space management of the sockets
Integrated extraction protection at each output, protects C13 and C19 standard cables against unintentional unplugging

The DIGITUS® PDU are the perfect solution for your network or server cabinet. With regard to power distribution, it fulfills the requirements of many applications in IT, network technology and laboratories. The individual C13 and C19 outlets are equipped with extract protection. It is optimally designed for vertical installation providing the advantage of saving rack spaces for more equipments. The 27 outlet PDU has excellent physical characteristics and is engineered for an output of up to 4,000 W (250 V AC / 16 A) which helps in achieving best performances with the appropriate load.

Technical details

Extraction protection at each output (for C13 and C19 standard cables)
Vertical installation
Housing: Aluminum
Plastic components made of ABS UL-94V-0
Mains plug: 2.5 mm², IEC60309 16 A plug
Cable: 3 m
Max. Load: 4000 W / 250 V AC / 16 A (50/60Hz)
Outlets: 24 x IEC60320 C13, 3 x IEC60320 C19
Output power: C13 (10A), C19 (16A)
Dimensions (L × W × D): 1140,5 x 45 x 60 mm
Colour: Black

Package content:

Scope of delivery: 1 socket strip, 1 safety instructions

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-96331-3 - Fiber Optic Splice Box, 1U, Equipped, 12x LC DX, OM3 108.09 EUR "Fiber Optic Splice Box, Equipped, LC, OM3
FO splice box, 1U, equipped, 12x LC DX, OM3,incl. splice cassette, colored pigtails, couplers

Technical details

Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s)
Colored pigtails
Couplers with zirconia ceramic ferrule
Couplers in polymer housing
Carrier housing made of 1.0 mm steel sheet, varnished
1 height unit (44.45 mm)
483mm width (19"")
240mm depth
M20/M25 screw, cassette, cassette cover and strain relief included
Sliding

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-96330-3 - Fiber Optic Splice Box, Equipped, LC, OM3 82.25 EUR "Fiber Optic Splice Box, Equipped, LC, OM3
FO splice box, 1U, equipped, 6x LC DX, OM3,incl. splice cassette, colored pigtails, couplers

Technical details

Completely prefabricated, fiber pigtails exposed and inserted into the splice cassette(s), crimp splice holders
Colored pigtails
Couplers with zirconia ceramic ferrule
Couplers in polymer housing
Carrier housing made of 1.0 mm steel sheet, varnished
1 height unit (44.45 mm)
483mm width (19"")
240mm depth
M20/M25 screw, cassette, cassette cover and strain relief included
Sliding

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DS-19232 - KVM cable set, VGA, USB, 3.0 m 20.23 EUR "KVM cable USB for KVM consoles

DIGITUS original accessory
Octopus cable set for DIGITUS consoles with integrated KVM, for USB / VGA servers

Technical details

HDDB15/M <=> HDDB15/M, 1 x USB/M
Color: Black
Suitable for DIGITUS TFT consoles with integrated KVM and KVM switches
Suitable for: DS-720xx and DS-23100-1, DS-23200-1, DS-23300-1

"

SEE OFFER SEE OFFER ebay

LANCOM SYSTEMS LANCOM DAC103 - Twinax SFP+ connector > connector 3 m cable 164.98 EUR "LANCOM SFP module

The LANCOM SFP modules for the fibre-optic networking of network components at Gigabit speed are suitable for the SFP ports of all the switches, routers and unified firewalls listed below.

Cable length: 3 m
Up to 10 Gbps link speed (1G/10G)
Full-duplex mode
Operating temperature 0°C - 70°C
Can be swapped out during system operation

Flexible connections for your switches, routers and firewalls!
LANCOM switches, routers and firewalls with integrated SFP ports are characterised by their utmost flexibility.
Whether for fast fibre-optic networking or as copper-bound Ethernet port: LANCOM SFP modules provide the specialised connections you need for your LANCOM device.
LANCOM SFP modules offer the best connections and highest reliability thanks to the tried-and-tested compatibility with LANCOM products."

SEE OFFER SEE OFFER ebay

DELOCK 84210 - cable, SFP+ Twinax, 3 m 46.07 EUR "This Twinax cable by Delock is used to connect devices to a switch with a SFP+ port or to connect two Ethernet switches.

Specification

Connectors:
2 x SFP+ male
Passive, low power consumption
Data transfer rate:
Gigabit Ethernet up to 1 Gbps
10 Gigabit Ethernet up to 10 Gbps
Compatible with SFP+ MSA, SFF-8431, SFF-8432
Operating temperature: 0 °C ~ 70 °C
Cable gauge: 28 AWG
Colour: black
Cable diameter: ca. 5.0 mm
Cable length: ca. 3 m

System requirements

A free SFP+ interface

Package content

Twinax Cable

Package

Antistatic cover

"

SEE OFFER SEE OFFER ebay

LEVELONE DAC0103 - Cable Twinax SFP+ plug > plug 3 m 66.75 EUR "10Gbps SFP+ Direct Attach Copper Cable, 3m, Twinax

The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.

Key Features

Compatible with SFP Multi-Sourcing Agreement (MSA) standards
Data rates of up to 10.5Gbps
Operating temperature: 0°C to 70°C

"

SEE OFFER SEE OFFER ebay

DIGITUS DIGI DN-81223 - Kabel SFP+ Twinax 3 m

Comparison of Similar Products