DIGITUS 6120320E - Serial DB9/RS232 extension cable, 2 m
13.98 EUR
Explore the detailed sheet rich in complete information, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
"Data transfer extension cable, D-SUB9 plug/socket, 2.0 m, serial, encapsulated, beige
Enables a secure and stable connection
This 9-pin serial cable is ideal for extending the cable distance between serial devices or directly as a connection cable.
Technical details
EAN: 4016032301462
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
"Data transfer extension cable, D-SUB9 plug/socket, 2.0 m, serial, encapsulated, beige
- It is not possible to accidentally remove the plug
Enables a secure and stable connection
This 9-pin serial cable is ideal for extending the cable distance between serial devices or directly as a connection cable.
Technical details
- The additional screw connection at both the input and output ensures maximum safety for professional use. Simply turn the screw cap into the socket provided - you're done. Careless removal of the D-Sub connector is not possible
- Core material: copper
- Port 1: DSUB, 9-pin, plug
- Port 2: DSUB, 9-pin, socket
- AWG: 28
- Assignment: 1:1
- Connector colour: beige
- Cable colour: beige
- Housing: moulded
- Contact surface: nickel-plated
- Assortment: serial cables
- Length: 2 m
- Shielding: simple shielding
EAN: 4016032301462
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
DELOCK 95282 - 8-port RS-232, serial, M.2 card, standard and low profile
113.26 EUR
"The M.2 to serial card from Delock expands your PC by eight external RS-232 ports. Various devices such as scanners, protocol converters, IoT devices etc. can be connected to the card. Using the included slot covers and RS-232 cable, the M.2 card is suitable for installation in any computer housing.Technical data
- Connections:
1 x M.2 key B+M connector
8 x serial RS-232 DB9 connector - Chip set: MaxLinear 17V358
- Form factor: M.2 2280
- Interface: PCIe 2.0
- Compatible with 16C550 UART
- Data transfer rate up to 921.6 Kbps
- FIFO:
8 x 256 byte - RX
8 x 256 byte - TX - Data bits: 5, 6, 7, 8
- Stop bits: 1, 2
Package contents
- M.2 card
- 1 x fixing screw for M.2 module
- 8 x serial connection cable (approx. 30 cm)
- 8 x low-profile covers
- 4 x standard covers
- User manual
DELOCK 95284 - 2-port RS-232, serial, M.2 card, standard and low profile
66.75 EUR
"The M.2 to serial card from Delock expands your PC by two external RS-232 ports. Various devices such as scanners, protocol converters, IoT devices etc. can be connected to the card. Using the included slot covers and RS-232 cable, the M.2 card is suitable for installation in any computer housing.Technical data
- Connections:
1 x M.2 key B+M connector
2 x serial RS-232 DB9 connector - Chip set: MaxLinear 17V352
- Form factor: M.2 2280
- Interface: PCIe 2.0
- Compatible with 16C550 UART
- Data transfer rate up to 921.6 Kbps
- FIFO:
2 x 256 byte - RX
2 x 256 byte - TX - Data bits: 5, 6, 7, 8
- Stop bits: 1, 2
Package contents
- M.2 card
- 1 x fixing screw for M.2 module
- 2 x serial connection cable (approx. 30 cm)
- 2 x low-profile covers
- 1 x standard cover
- User manual
STARTECH.COM ST 21050-PC-2 - 2-port PCI Express serial card, RS232, low profile
77.08 EUR
"- PCIE TO SERIAL: Connect serial RS232 (DB9) devices to a computer with this low-profile serial PC card. Support for the 16C1050 UART with high performance. Activity display via LED status lights on the DB9 card
- DEVICE COMPATIBILITY: Use this serial card to connect barcode readers/scanners, receipt printers, scales, PLCs, medical devices etc. The UART PCIe card operates with a 5-V or 12-V current via pin 9. Full-profile bezel is included
- APPLICATIONS: This card is ideal for IT applications such as server rooms, industrial control/automation, logistics and laboratories. With this RS232 PCIe card you can continue to use your old devices. The DB9 connector supports screw fastening
- DUAL SERIAL CARD SPECIFICATIONS: 16C1050 UART. Max. baud rate 921.6 Kbps per port. 256-byte FIFO. COM retention. Windows and Linux. ASIX AX99100 chipset. Odd/Even/Mark/Space/None parity modes. 5/6/7/8/9 data bits. PCIe 2.0 x1. Full-profile bezel included
STARTECH.COM ST 2S232422485 - 2-port serial PCIe card, RS232/422/485
133.93 EUR
"- 2-PORT PCIE SERIAL CARD: DIP switches allow each DB9 serial port to operate independently, therefore enabling the connection of RS-232, RS-422 and RS-485 devices. LED indicators indicate the status of data transfer and reception
- ADJUSTABLE POWER SUPPLY: The dual-port PCI Express serial adapter card has an adjustable power supply of 12 V (1.5 A per port), 5 V (1.5 A per port) or 0 V (RI) using pin 9 via SATA. The power supply for each port can be individually adjusted using jumpers
- STANDARD AND LOW PROFILE BRACKETS: The TAA-compliant serial card is equipped with two standard profile brackets (pre-installed) and contains two low-profile brackets for compatibility with small form factor desktops/servers
- SPECIFICATIONS: ASIX AX99100 chipset. 16C450 & 16C550 UART compatible. 2x 9-pin D-Sub ports. Maximum baud rate 921.6 Kbps per port. 256-byte FIFO. COM retention. Windows and Linux compatible. Odd/Even/Mark/Space/None parity modes. 5/6/7/8/9 data bits. PCIe 2.0 x1
EXSYS EX-45362 - EXSYS PCIe card 2S serial RS-232/422/485
99.82 EUR
"2S PCIe Serial RS-232/422/485 Board incl. LP bracket and Octopus cableThe EX-45362 PCIe I/O-adapter provides two high performance 16C550-type UART compatible RS-232, 422 and 485 serial ports. Each port you can select independent RS-232, 422 or 485. It is designed for PC, thin client or server to provide instant COM port expansion via the PCIe Bus. The card is fully PCI Plug-and-Play compatible and there are no IRQ and I/O address configuration problems. The EX-45362 support RS-485 Auto Transmitter turn around by unique feature ATTATM hardware. It provides +5V and +12V via the pin 9 from the male connector for a POS System (Power over System). With the board it's included a Low Profile bracket for small com-puter case.
- Interface: 2 x RS-232 V.24, RS-422/485 - independent mode selection
- ±15kV IEC1000-4-2 ESD Schutz for RS232 I/O's
- FIFO Buffer: 16C550 with 128Byte
- Data Bits: 5, 6, 7, 8 / Stop Bits: 1, 1.5, 2
- Parity: none, even, odd, space, mark
- Signal: RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- Signal: RS-422 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
- Support ATTATM Auto Transmitter
- Termination RS-422/485: 120 ohm, can enable or disable
- Support PCIe slot version 1.0 to 3.0
RS-485 - 4 wire (TXD+/-, RXD+/-) (Fullduplex)
RS-485 - 2 wire (Data+/-, Data+/-) (Halfduplex)
AXAGON AXG PCEA-S2N - 2-port RS232, serial, PCIe card
26.44 EUR
"PCI Express card with two serial ports 250 kbps. ASIX AX99100. Standard and low profile.- Input: PCI-Express, 1-Lane
- Output: DB9 M, serial interface, 2-port output
- PC connection: x1 slot
- Version: standard profile, low profile
The PCI Express card AXAGON PCEA-S2N adds two serial RS-232 interfaces with DB-9 connectors to the computer.
High performance, trouble-free compatibility and extensive connection options are ensured by the proven ASIX chipset.
The supplied low profile bezel allows the controller to be installed in standard and low-profile PC housings."
DELOCK 95270 - 2 port RS232, serial, M.2 card, standard and low profile
67.01 EUR
"The M.2 to serial card by Delock expands the PC by two external RS-232 port. Different devices such as scanners, protocol converters, IoT devices etc. can be connected to the card. With the help of the included slot brackets and RS-232 cables, the M.2 card is suitable for installation into any computer case.Specification
- Connectors:
1 x 59 pin M.2 key B+M male
2 x serial RS-232 DB9 male - Interface: PCIe 2.1 (x1)
- Chipset: ASIX AX99100
- Compatible with 16C950 UART
- Data transfer rate up to 1 Mbps
- Databits: 5, 6, 7, 8, 9
- Flow control: none, Xon / Xoff, RTS / CTS
- Parity: even, odd, none, mark, space
- FIFO: 256 byte
- Supports Active State Power Management (ASPM)
- Supports Direct Memory Access (DMA)
- Supports slow IrDA mode up to 115 Kbps
- Form factor: M.2 2280
- Dimensions (LxWxH): ca. 80 x 22 x 8 mm
System requirements
- Windows 8.1/8.1-64/10/10-64/11
- Windows Server 2016/Windows Server 2019
- A free M.2 key B or key M slot
Package content
- M.2 card
- 1 x fixing screw for M.2 module
- 2 x serial connecting cable (ca. 30 cm)
- 2 x low profile bracket
- 1 x standard bracket
- Driver CD
- User manual
Package
- Box
DELOCK 95273 - 2 port RS232, serial, Mini PCIe card
37.81 EUR
"The Mini PCI Express card by Delock expands a PC by two external serial RS-232 ports. Different devices such as scanner, protocol converter, IoT devices etc. can be connected to this card.Specification
- Connectors:
external: 2 x serial RS-232 DB9 male with nuts
internal: 1 x Mini PCI Express, Rev. 1.1 - Chipset: Moschip MCS9901
- Form factor: Mini PCIe full size
- Data transfer rate up to 460.8 Kbps
- Compatible with 16C450 / 16C550 / 16C650 UART
- FIFO: 256 byte
- Cable length incl. connectors: ca. 30 cm
System requirements
- Windows 8.1/8.1-64/10/10-64/11
- Motherboard with a free Mini PCIe slot with a PCIe interface
Package content
- Mini PCIe module
- 1 x slot bracket with two serial ports
- Driver CD
- User manual
Package
- Retail Box
STARTECH.COM ST 21050-PC-1 - 2-port PCI Express serial card, RS232
75.02 EUR
"- PCIE TO SERIAL: Connect serial RS232 (DB9) devices to a computer with this serial PC card. Support for the 16C1050 UART with high performance. Monitor activity with the built-in LED status lights on the PCI Express DB9 card
- DEVICE COMPATIBILITY: Use this serial card to connect barcode readers/scanners, receipt printers, scales, PLCs, medical devices etc. The UART PCIe card operates with a 5-V or 12-V current via pin 9. Low-profile bezel is included
- APPLICATIONS: This card is ideal for IT applications such as server rooms, industrial control/automation, logistics and laboratories. With this RS232 PCIe card you can continue to use your old devices. The DB9 connector supports screw fastening
- SPECIFICATIONS: 16C1050 UART Max. baud rate 921.6 Kbps per port 256-byte FIFO COM retention Windows and Linux Asix AX99100 chipset Odd/Even/Mark/Space/None parity modes 5/6/7/8/9 data bits PCIe 2.0 x1 Low-profile bezel included
DELOCK 95269 - 4 port RS232, serial, M.2 card, standard and low profile
71.95 EUR
"The M.2 to serial card by Delock expands the PC by four external RS-232 port. Different devices such as scanners, protocol converters, IoT devices etc. can be connected to the card. With the help of the included slot brackets and RS-232 cables, the M.2 card is suitable for installation into any computer case.Specification
- Connectors:
1 x 59 pin M.2 key B+M male
4 x serial RS-232 DB9 male - Interface: PCIe 2.1 (x1)
- Chipset: ASIX AX99100
- Compatible with 16C950 UART
- Data transfer rate up to 1 Mbps
- Databits: 5, 6, 7, 8, 9
- Flow control: none, Xon / Xoff, RTS / CTS
- Parity: even, odd, none, mark, space
- FIFO: 256 byte
- Supports Active State Power Management (ASPM)
- Supports Direct Memory Access (DMA)
- Supports slow IrDA mode up to 115 Kbps
- Form factor: M.2 2280
- Dimensions (LxWxH): ca. 80 x 22 x 8 mm
System requirements
- Windows 8.1/8.1-64/10/10-64/11
- Windows Server 2016/Windows Server 2019
- A free M.2 key B or key M slot
Package content
- M.2 card
- 1 x fixing screw for M.2 module
- 4 x serial connecting cable (ca. 30 cm)
- 4 x low profile bracket
- 2 x standard bracket
- Driver CD
- User manual
Package
- Box
DIGITUS 30000-1 - PCI Express card for 2x RS-232
34.71 EUR
"Serial I/O,2-port, PCIexpress add-on card 2xDB9 M, slot sheet + LP sheet, ASIX99100 chipset - Data transfer rate up to 128,000 bps
- Complies with PCI Express Base specification 2.0
- 2x DSUB 9, serial interfaces, male, UART 16C950
This serial PCI Express add-on card can be inserted into its PCI Express slot and is provided with two RS232 (DB9) serial ports. Based on a native single-chip design, it reduces CPU load by up to 48% compared to traditional serial cards.
Technical details
- 2x DSUB 9, serial interfaces, male, UART 16C950
- Chipset: AX99100
- Data transfer rate up to 1.5 Mbps
- Complies with PCI Express Base specification 2.0
- Compatible with PCI Power Management 1.2
- Operating temperature: 0°C to 70°C
- Operating humidity: 0% - 85% RH (non condensing)
- Supports Windows 10, 8.1, 8, 7, Vista, XP, macOS and Linux
Included in delivery
- Serial interface card, PCIe
- Low-profile slot panel
- User manual
- CD driver
STARTECH.COM ST PEX2S953LP - 2-Port RS232 Serial Adapter Card, 16950 UART
67.78 EUR
"2-Port RS232 Serial Adapter Card with 16950 UARTPCI Express to Serial Adapter 921.4Kbps Windows® and Linux® Compatible
- Add RS232 DB9 capabilities without purchasing a new server or computer
- PCI Express 1.1 compliant, ensuring a reliable performance
- Maximize case form factor integration with a low-profile or full profile bracket
This RS232 Serial Adapter Card lets you add two RS232 (DB9) serial ports to your computer through a PCI Express (PCIe) slot. It enables you to interact with serial devices, such as card readers, printers, PIN pads, and modems, at speeds of up to 921.4Kbps.
Maximum Compatibility
With broad OS support, including for Windows and Linux, this PCI Express card is easy to integrate into mixed environments. The card comes pre-configured with a low-profile bracket, and includes an optional full-profile bracket, so installation is easy regardless of the case form factor.
Experience Optimal Technology
- This PCIe to serial adapter supports the following features:
- Compatible with industry standard 16950 UART
- Supports max baud rate of up-to 921.4Kbps
- Provides 5/12V power output on Pin 9 when external power is connected
- 128-byte depth FIFO per transmitter and receiver
- Supports 9, 8, 7, 6, 5 data bits
- Asix AX99100 chipset
- PCI Express 1.1 compliant
DELOCK 90413 - 2 Port RS 232, seriell, 1 Port DB25, parallel, PCIe card
27.47 EUR
The PCI Express card by Delock expands a PC by two external serial ports as well as one external parallel port. Different devices such as scanner, printer, mouse etc. can be connected to this card.Specification
• Connectors:
external:
2 x serial RS-232 DB9 male (separate rear bracket)
1 x Parallel DB25 female
internal:
1 x PCI Express x1, V1.1
• Chipset: WCH CH384L
• Operating temperature: -40 °C ~ 85 °C
• Relative humidity: 0 - 95 % (non condensing)
• Dimensions (LxWxH): ca. 79 x 59 x 11 mm
• Serial specification:
• Data transfer rate up to 460.8 Kbps
• FIFO: 256 byte
• Compatible with 16C950 UART
• Parallel specification:
• Data transfer rate up to 1.5 Mbps
• FIFO: 256 byte
• Supports SPP, Byte and ECP mode
System requirements
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC with one free PCI Express slot
Package content
• PCI Express card
• Slot bracket
• 3 x low profile bracket
• Driver CD
• User manual
Package
• Retail Box
AXAGON AXG PCEA-S4N - 4-port RS232, serial, PCIe card
32.59 EUR
"PCI Express card with four serial ports 250 kbps. ASIX AX99100. Standard and low profile.- Input: PCI-Express, 1-Lane
- Output: DB9 M, serial interface, 4-port output
- PC connection: x1 slot
- Version: standard profile, low profile
The PCI Express card AXAGON PCEA-S4N adds four serial RS-232 interfaces with DB-9 connectors to the computer.
High performance, trouble-free compatibility and extensive connection options are ensured by the proven ASIX chipset.
The supplied low-profile bezel allows the controller to be installed in standard and low-profile PC housings."
DELOCK 89347 - PCIe x1 card > 6x serial RS-232
97.76 EUR
"The Delock PCI Express card expands your PC by six external serial ports. You can connect devices like scanner, printer, mouse etc. to the card.Technical details
- Connector:
external:
2 x serial RS-232 DB9 male
2 x serial RS-232 DB9 male (separate rear bracket)
2 x serial RS-232 DB9 male (separate rear bracket)
internal:
1 x PCI Express x1, V1.1 - Chipset: Moschip
- Data transfer rate up to 230.4 Kb/s
- FIFO: 256 byte
- Compatible with 16C550 UART
System requirements
- Windows Server-2003/Server-2003-64/Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-64/10/10-64/11, Linux Kernel 2.6
- PC with one free PCI Express slot and two rear slot
Package content
- PCI Express card
- 2 x rear bracket
- 6 x low profile bracket
- Driver CD
- User manual
Package
- Blister
STARTECH.COM ST PEX16S550LP - 16 Port RS232, serial, PCI card, low profile
443.03 EUR
"- 16 DB9 RS232 ports from a single PCIe slot
- enables high-speed serial communication with data transfer rates up to 921.6 Kbps
- compatible with low- and full-profile desktop computers or servers
- fully compliant with PCI Express 1.0a/1.1 specification, compatible with 1x, 2x, 4x, 8x, and 16x PCIe bus
- +/-15kV ESD protection
Add 16 RS232 serial ports (DB9) to your low or full-profile computer, through a PCI Express slot
This PCI Express serial card adds 16 high-speed RS232 ports to your standard or low-profile desktop or server PC. This lets you maximize the number of available DB9 RS232 ports that are available for connecting your serial-based devices and equipment, while using only a single PCI Express (PCIe) slot. It's the perfect solution for adding the serial ports you need, even if your desktop PC or server only has a limited number of PCIe expansion slots.
Add 16 RS232 ports through one PCIe slot
You can install the serial card to add 16 high-performance DB9 RS232 serial ports from a single PCIe slot. With two breakout cables of 8 ports each, the PCIe serial card maximizes the density of DB9 RS232 ports on a server or desktop computer. It's ideal for system upgrades in a wide range of applications, including manufacturing equipment, POS equipment, security devices such as surveillance cameras, and environment or building control systems.
The serial card is compliant with PCI Express 1.0a specification, and it's compatible with 1x, 2x, 4x, 8x and 16x PCI Express slots.
High-speed serial communication
The PCIe serial card delivers high-performance, high-speed serial communication, with support for data transfer rates of up to 921.6 Kbps.
Easy installation
The serial card is easy to install and configure, and compatible with a broad range of Windows® and Linux® operating systems. The card features IRQ sharing and supports plug-and-play serial device connections, which makes it convenient and easy to connect serial devices. It includes a low-profile bracket making it compatible with both full profile and low profile PC chassis slots."
DELOCK 89909 - Converter PCIe x1 > DB44 + cable for 2x RS-232, 5 V/12 V
54.91 EUR
"This Delock PCI Express card expands the PC by two external serial ports.Specifications
- Connections:
- Internal:
- 1 x PCI Express x1, V2.0
- 1 x 4-pin Molex power connector
- External:
- 1 x DB44 socket
- Internal:
- Connection cable: DB44 connector > 2 x serial RS-232 DB9 connectors
- Chipset: MaxLinear 17V352
- Compatible with 16C550 UART
- Data transfer rate up to 230.4 Kbps
- Data bits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Parity bit: even, odd, none, marked, empty
- FIFO: 256 bytes
- ±15-kV ESD protection on all signal pins
- 5-V or 12-V voltage individually adjustable for each port using the jumper (pin 1/4/8/9)
- Electrical output per port: max. 7.5 watts (5 V/1.5 A)
- Electrical output per port: max. 18 watts (12 V/1.5 A)
- I/O addresses and IRQ are assigned by BIOS
- Dimensions (LxW): approx. 80 x 55 mm
System requirements
- Windows 8.1/8.1-64/10/10-64
- PC with one free PCI Express slot
- Power supply unit with one free Molex power connector
MOXA NPORT 5110 - 1 port device server, 10/100M Ethernet, RS-232, DB9
216.57 EUR
"Our NPort device servers make your serial devices network-ready in an instant. Their compact size makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN.- Small size for easy installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile operation modes
- Easy-to-use Windows utility for configuring multiple device servers
- Built-in 15 kV ESD protection for all serial signals
- SNMP MIB-II for network management
- Configure by Telnet, web browser, or Windows utility
- Adjustable pull high/low resistor for RS-485 ports
NPort® 5100 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort 5100 device servers to give your PC software direct access to serial devices from anywhere on the network.
Most Cost-effective Serial-to-Ethernet Solution
Using serial device servers to connect legacy serial devices to Ethernet is now commonplace, and users expect device servers to be cost-effective and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, the NPort® 5100 Series provides the best choice for serial-to-Ethernet converters.
Adjustable Termination and Pull High/Low Resistors
In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, the NPort® 5100 device servers come with jumpers for adjusting termination and pull high/low resistor values for each serial port.
Standard TCP/IP Interface and Broad Choice of Operation Modes
The NPort® 5100 device servers can be configured for TCP Server, TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode, ensuring compatibility with software based on a standard network API (e.g., Winsock or BSD Sockets).
Real COM/TTY Drivers for Existing Software
The Real COM/TTY drivers provided with the NPort® 5100 device servers allow you to continue using software designed for communicating through COM/TTY ports. Installation and configuration are painless, and allows your serial devices and PC to communicate seamlessly over a TCP/IP network. Using Moxa's Real COM/TTY drivers is an excellent way to preserve your software investment while still allowing you to enjoy the benefits of networking your serial devices.
Easy to Troubleshoot
NPort® 5100 device servers support SNMP, which can be...
MOXA NPORT 5110A - 1 port device server, 10/100M Ethernet, RS-232, DB9
190.82 EUR
"Our NPort device servers make your serial devices network-ready in an instant. Their compact size makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN.- Only 1 W power consumption
- Speedy 3-step web-based configuration
- Surge protection for serial, Ethernet, and power lines
- COM port grouping and UDP multicast applications
- Screw connectors for secure installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile TCP and UDP operation modes
- Connect up to 8 TCP hosts
The NPort® 5100A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5100A device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial-to-Ethernet solutions possible.
A Greener Serial-to-Ethernet Solution
The MiiNe is a small but powerful Arm-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort® 5110A Series' power consumption is less than 1 W. The NPort® 5100A Series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today's industrial environments.
Surge Protection for Serial, Ethernet, and Power
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa's leading-edge surge immunity solution, which is applied to the NPort® 5100A's serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.
3-Step Web-based Configuration
The NPort® 5100A's 3-step web-based configuration tool is straightforward and user-friendly. The NPort® 5100A's web console guides users through three simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this fast 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.
Easy to Troubleshoot
NPort® 5100A device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an email alert can be sent instead. Users can define the trigger for the alerts using Moxa's Windows utility, or the web console. For example, alerts...
MOXA NPORT 5410 - 4 port device server, 10/100M Ethernet, RS-232, DB9
733.43 EUR
"Our NPort device servers make your serial devices network-ready in an instant. Their compact size makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN.- 10/100M auto-sensing Ethernet
- 4 serial ports supporting RS-232/422/485
- Built-in 15 kV ESD surge protection for all serial signals
- Socket modes: TCP server/TCP client/UDP/Real COM
- Configure via Telnet/Web/Windows utility
- SNMP MIB-II for network management
NPort® 5400 device servers provide many useful features for serial-to-Ethernet applications, including an independent operation mode for each serial port, user-friendly LCD panel for easy installation, dual DC power inputs, and adjustable termination and pull high/low resistors.
Network Readiness for up to 4 Serial Devices
NPort® 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bidirectional. By using NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices and distribute management hosts over the network.
Independent Operation Mode for Each Serial Port
NPort® 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort® 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.
User-friendly LCD Panel for Easy Installation
An LCD panel is built into the NPort® 5400's top panel, with four buttons for data input, configuration, and operation mode selection. The LCD panel displays the server name, serial number, and IP address, and it can be used to enter or modify parameters such as IP address, netmask, and gateway. (The LCD panel is not available on wide-temperature models.)
Dual DC Power Inputs
NPort® 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power inputs gives users greater flexibility for use with different applications.
Adjustable Termination and Pull High/Low Resistors
The NPort 5400 Series provides adjustable termination and pull high/low resistors for RS-485 applications. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high/low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values is universally compatible with...
DELOCK 66736 - USB to serial adapter cable, ESD protection, APC, 2 m
35.98 EUR
"This Delock USB to serial RS-232 RJ12 adapter cable can be used to control and monitor APC rack power distribution units and rack transfer switches. Compatible models:
Rack power distribution units:
AP78xx, AP79xx, AP86xx, AP88xx, AP89xx
Rack automatic transfer switches:
AP7752, AP7730, AP7732, AP7721, AP7723
Specifications
- Connections:
- 1 x USB 2.0 Type-A connector
- 1 x serial RS-232 RJ12 connector
- Chipset: FTDI FT231X
- Plug and play
- FIFO: 512-Byte - TX
- FIFO: 512-Byte - RX
- Compatible with USB 3.0, USB 2.0 and USB 1.1 full speed 12 Mbps
- Data transfer rates of up to 230.4 Kb/s
- Signals: GND(2), RXD(3), TXD(4), GND(5)
- ESD surge suppressor IEC 61000-4-2
- HCP & VCP: ±4 kV
- Air discharge: ±8 kV
- Contact discharge: ±4 kV
- Colour: black
- Cable length (including connectors): approx. 2.0 m
- Suitable for various APC devices
System requirements
- Windows 8.1/8.1-64/10/10-64
- PC or notebook with one free USB type A port
Contents
- USB 2.0 type A to RS-232 RJ12 adapter cable
Packaging
- Resealable bag
NAVILOCK 61265 - GPS RS-232 connection cable
28.25 EUR
"Serial Navilock GNSS receivers have an MD6 universal connector plug. The pin assignment of this plug is identical for the u-blox, Sony, GLONASS and SiRF chipsets. You will need this specific connection cable to connect the GNSS receiver to a serial port. It is connected to the power supply using the PS2 socket of the notebook, tablet PC etc. The PS2 connection is purely a power connection and does not carry any data channels. The data protocol is provided via the SUB-D9 plug.Technical data
- To connect to the D-Sub 9 serial port
- Powered by PS2
- MD6 Navilock GNSS 6-pin receiver socket
- Cable length of 6-pin connection cable: 59 cm (includes connectors)
- PS/2 cable length: 39 cm (includes connectors)
Package contents
• Connection cable for GNSS receivers"
EXSYS EX-13101 - USB 2.0 converter board, USB-A to RS-232
29.49 EUR
"The EX-13101 USB to RS232 UART converter board consists of a board with a fixed USB connector and an FT232RL FTDI chip that processes all USB signals and protocols. It is ideal for testing purposes or for creating USB to serial cables according to your own criteria.- Interface RS-232 V.24
- FIFO buffer with 265 bytes (receive) and 128 bytes (transmit)
- Data bits: 7 and 8
- Stop bits: 1 and 2
- Parity: none, even, odd, space and mark
- RS-232 signals: TxD, RxD, RTS, CTS, DCD, GND
- Power supply from the USB bus (bus power)
- Extended temperature range: -40°C to 85°C
- Chip set: FTDI
GOOBAY 97118 - Jack cable extension, 3.5 mm, 3-pin, 2 m
14.03 EUR
"3.5-mm jack plug (3-pin, stereo) > 3.5-mm jack socket (3-pin stereo)- For extending audio cables with AUX 3.5-mm plugs, e.g. stereo headphones
- Flexible cable with small bending radius
- Very slim plug
- Shielded
Technical data
Connections
- Connection, type: jack 3.5-mm plug (3-pin, stereo)
- Connection 2, type: 3.5-mm jack socket (3-pin, stereo)
- Connector, contact material: gold-plated
Cable
- Cable length: 2 m
- Cable type: round cable
- Inner conductor material: CU (copper)
- AWG: 28
General
- Package type: bulk
- Unit: 1 in plastic bag
- Colour: black
- Certifications: CE, WEEE
- Diameter: 2.6 mm
GOOBAY 62362 - Jack cable extension, 3.5 mm, 4-pin, 2 m
12.42 EUR
"3.5-mm jack plug (4-pin, stereo) > 3.5-mm jack socket (4-pin stereo)- For extending audio cables with AUX 3.5-mm plugs, e.g. stereo headphones with a microphone
- Flexible cable with small bending radius
- Very slim plug
Technical data
Connections
- Connector, type: 3.5-mm jack plug (4-pin, stereo)
- Connection 2, type: 3.5-mm jack socket (4-pin, stereo)
Cable
- Cable length: 2 m
- AWG: 28
General
- Package type: bulk
- Unit: 1 in plastic bag
- Certifications: CE, WEEE
- Diameter: 2.6 mm
DIGITUS DIGI DS-19231 - KVM cable set, VGA, USB, 1.8 m
18.17 EUR
"KVM cable USB for KVM consolesDIGITUS original accessory
Octopus cable set for DIGITUS consoles with integrated KVM, for USB / VGA servers
Technical details
- HDDB15/M <=> HDDB15/M, 2 x MiniDIN6/M, 1 x USB/M
- Color: Black
- Suitable for DIGITUS TFT consoles with integrated KVM and KVM switches
- Suitable for: DS-720xx und DS-23x00-x
SCHELLENBERG AS 20028 - System M cable duct, extension
25.4 EUR
"Schellenberg cable duct system M, white, 2.1 m, extension- orderly cable routing without shortening cables
- surface mounting with adhesive pads or screws
- paintable with any wall color
- easy to cut with miter box and drilling template
- 4 possible cable outlets in the end cap
Innovative arrangement of cables by laying loops instead of shortening them
With the extension of the innovative System M cable duct, you can ensure orderly cable routing of excessively long power cables.
Compared to conventional cable ducts, this version has clips and fixing bars on the base plates.
This makes it possible to place a power cable in loops instead of shortening it.
Thus, the power cable remains in the original, and therefore the warranty of the device.
How many cables can fit in the cable channel depends on the application.
For example, you can arrange up to 3 power cables with a diameter of 9 mm each next to each other or put one power cable in loop.
To fix the surface-mounted cable channel, you can use screws or the adhesive pads included in the package contents.
If you want to cut the cable channel to shorten its length, we recommend using a fine metal saw for this purpose.
Then you can smooth the edges with the help of a file.
If you would like to adapt the white cable duct to your living environment even better, you can easily paint over it with any wall color.
This set is an extension to the System M starter set.
The package contents include two covers, two base plates and ten adhesive pads.
Technical data
- Color: white
- Fastening: Adhesive or screw fastening
- Application area: Indoor
- Width cover: 35 mm
- Length cover: 1050 mm
- Length base plate: 363 mm
- Width base plate: 30 mm
- Height: 15 mm
- Diameter cable: max. 9 mm
- Paintable: Yes
Package contents:
- 2 x cover
- 2 x base plate
- 10 x adhesive pads
- 1 x mounting instructions
M-E ME WA-SWS2 - Detector cable extension WA-6 & WA-14, Softwire
30.63 EUR
"Detector cable extension, softwire sensor for water detectors WA-6 & WA-143 meter detector cable extension, softwire sensor for water detectors WA-6 & WA-14
- Soft, flexible and easy to lay
- Perfect for hard-to-reach areas of application
- Detector cable is simply laid on the floor and detects leaks under cabinets and furniture along its entire length
- Drying time after contact with water approx. 24 hours - we therefore recommend an additional softwire cable for replacement
- Can be extended as required with additional detector cables
Most important locations:
- Basement
- kitchen
- bathroom
- boiler room
- Attic
- HW room
Scope of delivery:
- 1x 3m softwire sensor cable
- 3x cable holder
LINDY 42681 - USB 2.0 hub, 4-port, extension, Cat 5e/6, 50 m
136 EUR
"50 m extension for 4 USB devices with Cat.5e/6 cable power supply- Bridges distances of up to 50 m with a good value Cat. 5e/6 network cable (not included) for 4 devices
- ""Power over Cable"" ensures power supply with just one power supply unit on the transmitter
- Supports USB 2.0 high speed and USB 1.1 full speed/low speed
- Plug and play
This Lindy USB 2.0 Cat.6 extender bridges distances of up to 50 m between four USB devices and a computer. The extender's transmitter and receiver unit are connected using a Cat.5e/6 network cable (not included). We recommend the use of patch cables with rigid cores to achieve the best possible performance and compatibility.
Power is supplied by the RJ45 cable: in other words if you connect the supplied power supply to the transmitter, you no longer need power to the receiver and have more flexibility in its installation.
The rugged aluminium housing with mounting brackets makes this extender ideal for use in industrial applications."
LINDY 42679 - USB 2.0 hub, 4-port, extension, Cat 5e/6, 60 m
99.98 EUR
"60 m extension for up to 4 USB 2.0 devices- The transmitter and receiver are connected by a Cat.5e/6 network cable (or higher) (not included)
- Supports USB 2.0 high speed data transfer rates of up to 480 Mbit/s
- Plug and play, independent of operating system
The Lindy USB 2.0 Cat.6 extender uses a Cat.5e/6 (or higher) STP network cable to bridge distances of up to 60 m between computers and four peripherals. We recommend the use of patch cables with rigid cores to achieve the best possible performance and compatibility.
It is a hardware solution that consists of two components: a transmitter that connects to the computer and a receiver that to connect peripherals.
The extender is suitable for USB 2.0 devices such as printers, storage media, scanners, mice or keyboards. A power supply is included if you want to connect a high-power devices."
LINDY 43386 - USB 2.0 Hub, 2 port, extension, Cat.6, 50 m
134.71 EUR
"50-m extension for two USB devices with bi-directional PoC- Bridges distances of up to 50 m with a low-cost Cat.6 network cable (not included) for two devices
- Bi-directional PoC (Power over Cable) ensures power supply with only one power supply unit at either the transmitter or the receiver
- Supports USB 2.0 high speed and USB 1.1 full speed/low speed
- Plug and play
This Lindy USB 2.0 Cat.6 extender bridges distances of up to 50 m between two USB devices and the computer. The extender's transmitter and receiver are connected with an inexpensive Cat.6 network cable (not included). We recommend the use of patch cables with rigid cores to achieve the best possible performance and compatibility.
The bi-directional POC (Power over Cable) functionality offers additional flexibility. This enables power to be supplied alongside data via a Cat.6 network cable in a point-to-point connection between the transmitter and receiver, meaning that only a single power supply is required at the transmitter or receiver."
DELOCK 87414 - Delock USB 2.0 to 4-port S´serial hub
57.88 EUR
The USB 2.0 to serial adapter can be used to connect up to four serial devices via one USB port.Technical data
• MosChip chipset
• 4 X RS232 serial interfaces with DB9 connectors
• Plug with nuts
• Data transfer rates of up to 921.6 Kb/s
• LED display
• Automatic selection of IRQs and I/O addresses
• Four 16C450/16C550-compatible UARTs
• Supports FIFO 512 bytes per port (receive/transmit)
System requirements
• Windows 2000/XP/Server-2003/Vista/Vista-64/7/7-64/8/8-64
• PC or notebook with a free USB port
Package contents
• USB 2.0 to serial adapter
• USB 2.0 connection cable
• CD driver
• User manual
STARTECH.COM ST PEX2S1050 - 2 Port PCIe Serial Card - 16C1050 UART
71.92 EUR
"Add two powerful RS232 serial ports (DB 9) to your low or full profile computer through a PCI Express slot- 2-channel 16C1050 UART for full compatibility with 16C1050 devices
- Maximum data transfer rate of 460 kbit/s.
- Conforms to PCI Express 1.0a specification, 1 x, 2 x, 4 x, 8 x, And 16 x PCIe bus
- 256-byte FIFO for transmission and reception.
- In-band software flow control with programmable XON/XOFF in both directions
This PCI Express serial card adds two powerful RS232 serial ports to your desktop or server to connect your serial devices and accessories.
Convenient system expansion through PCIe
The serial PCI card can be installed in an available PCI Express slot to provide two powerful 16C1050 RS232 UART serial channels/ports. It provides a convenient solution for connecting modern or older devices to newer computer systems that do not have RS232 ports. The serial card complies with the PCI Express 1.0a specification and is compatible with 1 x, 2 x, 4 x, 8 x, and 16 x PCI Express slots.
The 2-port serial PCIe card is ideal for system expansion in a wide range of applications, including production facilities, POS devices, security devices such as Surveillance cameras, card readers or access covers, and for systems for environmental control or building control.
High-performance serial data transmission
The serial PCIe card provides high-performance serial data transmission and supports data transfer rates of up to 460 kbit/s. The serial card reduces CPU load, which helps to optimize system performance and errors, such as Avoid overflows by protecting resources. The 2-channel UART also guarantees smooth performance even when both parts are used.
Easy To Install
The serial card is easy to install and configure, and supports many Windows® operating systems. It also provides IRQ sharing and supports serial plug-and-play device ports. This ensures a comfortable, effortless installation. A built-in standard profile bracket and an optional low profile bracket are included."
AXAGON AXG PCEA-PSN - 3-port, 1x parallel, 2x serial, PCI card
28.5 EUR
"PCI Express card with one parallel port and two serial ports 250 kbps. ASIX AX99100. Standard and low profile.- Input: PCI-Express, 1-Lane
- Output: DB25, DB9 M, parallel port, serial port, 2-port output
- PC connection: x1 slot
- Version: standard profile, low profile
The AXAGON PCEA-PSN PCI Express card adds a parallel interface with a DB25 connector on the board and two standard serial RS-232 interfaces with DB-9 connectors on the bezel.
High performance, trouble-free compatibility and extensive connection options are ensured by the proven ASIX chipset.
The supplied low profile bezel allows the controller to be installed in standard and low-profile PC housings."
PAULMANN PLM 70525 - SIMPLED Outdoor extension cable, 2.5 m, IP44
18.79 EUR
"SIMPLED Outdoor extension cable IP44 2.5 m DC 24 V Black plastic
The SimpLED Outdoor extension cable is compact, powerful and versatile.
With a length of 2.50 metres, it can be connected to a SimpLED Outdoor transformer and a SimpLED Outdoor strip.
It also possible to connect two 2.50-metre cables together in order to extend the system as required.
The SimpLED Outdoor extension cable is the perfect complement to the SimpLED Outdoor System.
- IP44 splash-proof
MOBEYE AC-TS-E2 - Temperature sensor cable 10m
87.42 EUR
The Mobeye temperature sensor works only with the Mobeye CM2200, MS200E, CML2255, CML2275, CML2285 (second sensor and / or replacement product). Cable Length 1000 centimeters. Extendible with Mobeye extension.
NAVILOCK 62875 - Connection cable, M8 waterproof socket > DB9 socket
61.58 EUR
"This waterproof connection cable by Navilock forwards the serial RS-232 signals of the GNSS receiver at the M8 connection to the DB9 female. Power is supplied to the GNSS receiver via the USB Type-A male.Technical details
- Connectors:
1 x M8 female >
1 x DB9 female >
1 x USB Type-A male - Power supply via USB
- Data transfer: bidirectional
- Length incl. connectors (L): ca. 1.2 m
System requirements
- A Navilock serial M8 GNSS receiver
Package content
- Connection cable for GNSS receiver
- Navilock support CD
Package
- Zip poly bag
DIGITUS DIGI DN-948030-2 - FTTx installation kit, 4-fiber, LC/APC, pre-terminated, 30 m
46.12 EUR
"DIGITUS FTTx Installation Kit, Pre-assembled, 4-fiber, LC/APC connectors, length 30 mFTTx installation kit, SM G657A2, 30 m LSZH CPR B2ca, one end 4F LC/APC, one end unterminated
The compact FTTH kit, featuring a fiber optic installation cable pre-terminated at one end, is ideal for installing high-speed fiber optic connections within the home-specifically for what is known as Network Level 4.
- Quick installation time within the living unit
- FTTH drop cables come pre-terminated with LC/APC connectors on one end
- The unterminated end can be easily pulled through or routed to the building distribution point
- Surface-mounted outlet for an optimized, secure patch cable installation
- Integrated, captive laser protection on the LC/APC adapters
- Sturdy pulling eye for drawing the cable through conduit systems
The growing demand for extending fiber-optic networks into the home calls for products that facilitate simple and efficient installation. The Digitus FTTH installation kit offers a solution for easily extending and completing in-home fiber-optic networks. Installation is simplified because the product comes with all necessary components, eliminating the need to source individual parts separately.
The connection box can be mounted at the designated location, and connecting to the router is made easier by the inclusion of pre-installed LC/APC connectors.
The integrated fiber-optic drop cable can then be routed to establish a connection to the building entry point (BEP), which serves as the network's entry point into the building. This unit provides additional connection and splicing options to accommodate the need to scale the number of fiber-optic connections.
Technical details:
- FTTH wall outlet suitable for wall and DIN-rail mounting
- 2x LC-APC duplex fiber optic adapters with shutters
- Adapter shutters provide protection against laser light and dust
- Adapter type: LC/APC duplex
- Number of ports: 4
- Number of populated ports: 2
- Integrated splice tray
- Smooth cable unspooling
- 4 fibers, 9/125µm G.657A2 (bend-optimized)
- Cable diameter: 2.0 mm
- 900µm buffer, easy to strip
- Aramid strain relief
- LSOH outer jacket, white
- Cable construction: I-V(ZN)H
- CPR class: B2ca
Scope of delivery:
- FTTx installation kit, pre-assembled, 4-fiber, LC/APC connectors, length 30 m
- Mounting accessories (screws and wall plugs)
LOGILINK WL0101 - WiFi aerial extension cable, 5 m
22.35 EUR
LogiLink WiFi aerial extension cable. For extending a WiFi cable. Connector 1 RP-SMA (male) and connector 2 RP-SMA (female).
The cable length is 5.0 metres.
- WiFi aerial extension cable
- Connector 1: RP-SMA (male)
- Connector 2: RP-SMA (female)
- Length: 5.0 metres