DIGILENT DIGIL 240-113 - Plexiglas covers: Recommended addition for PYNQ-Z1 Board
20.08 EUR
Browse the detailed sheet with complete information, compare prices and identify the features of PRODUCTNAME, proposed at the cost of PRICE CURRENCY; belongs to the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.
Plexiglass Covers: Recommended Addition for the PYNQ-Z1
Description
Clear, sleek covers made out of plexiglass specifically designed to protect your PYNQ-Z1. The covers are easily attached to the PYNQ-Z1 using the four included stand-offs along with eight screws, protecting the top and bottom of the board. The completed cover provides openings for all of the connectors, buttons, and switches to make the system easy to access while being protected.
What's Included:
• Two acrylic plates ( 129 x 94 mm)
• Four stand-offs to connect acrylic plates to the PYNQ-Z1 board
• Eight screws to connect stand-offs to acrylic plates
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Plexiglass Covers: Recommended Addition for the PYNQ-Z1
Description
Clear, sleek covers made out of plexiglass specifically designed to protect your PYNQ-Z1. The covers are easily attached to the PYNQ-Z1 using the four included stand-offs along with eight screws, protecting the top and bottom of the board. The completed cover provides openings for all of the connectors, buttons, and switches to make the system easy to access while being protected.
What's Included:
• Two acrylic plates ( 129 x 94 mm)
• Four stand-offs to connect acrylic plates to the PYNQ-Z1 board
• Eight screws to connect stand-offs to acrylic plates
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
DIGILENT DIGIL 240-140 - Analog Discovery Studio - MTE Cable
35.95 EUR
The Analogue Discovery Studio MTE (Measurement and Test equipment) cables are a convenient connection method for any of the 12 instruments in the Analogue Discovery Studio. This set of six cables has connectors that are perfect for connecting signals to circuits on the breadboard canvas.2x1-channel single-oscilloscope MTE cable (orange, orange/white)
2x1-channel two-oscilloscope MTE cable (blue, blue/white)
2x1-channel single-waveform-generator MTE cable (yellow, black)
2x1-channel two-waveform-generator MTE cable (yellow/white, black)
2x3 MTE power supply cables (red, white, black)
2x10 digital I/O MTE cables (grey, grey/white, pink, green, purple, brown, pink/white, green/white, purple/white, brown/white etc. repeated)
DIGILENT DIGIL 410-292 - Nexys A7-100T: FPGA Trainer Board, recommended for ECE Curriculu
496.06 EUR
Nexys A7: FPGA Trainer Board Recommended for ECE CurriculumDescription:
The Nexys A7 (previously known as the Nexys 4 DDR) is an incredibly accessible, yet powerful, FPGA development board. Designed around the Xilinx Artix®-7 FPGA family, the Nexys A7 is a ready-to-use digital circuit development platform that brings industry applications into the classroom environment. Students can start learning right away with the Nexys A7 thanks to its versatile selection of interfaces, such as 10/100 Ethernet, USB, UART, JTAG, and VGA. With a built-in temperature sensor, microphone, and accelerometer, students can work on a variety of projects without needing any additional hardware. Of course, 5 Pmod ports are available for additional customizability and applications.
The Nexys A7-100T features the XC7A100T-1CSG324C and is is supported by Xilinx's Vivado Design Suite.
Features:
• FPGA part: XC7A100T-1CSG324C
• Logic Slices: 15,850
• Block RAM (Kbits): 4,860
• DDR2 Memory (MiB): 128
• Clock Tiles (with PLL): 6
• DSP Slices: 240
• FPGA Features
- Internal clock speeds exceeding 450MHz
- On-chip analog-to-digital converter (XADC)
- Programmable over JTAG and Flash
• System Features
- USB-JTAG programming circuitry
- Powered from USB or any 7V-15V source
- microSD card connector
• System Connectivity
- 10/100 Mbps Ethernet
- USB-UART Bridge
• Interaction and Sensory Devices
- 3-axis accelerometer
- PDM microphone
- PWM audio output
- Temperature Sensor
- 2 four-digit seven-segment displays
- USB HID for mice, keyboards, and memory sticks
- 16 Switches
- 16 LEDs
- 2 tri-color LEDs
- 12-bit VGA output
• Expansion Connectors
- 4 Pmod connectors
- Pmod for XADC signals
• Product Compliance:
- HTC: 8471500150
- ECCN: 5A992.c
What's included
• Nexys A7 development board
• Digilent custom packaging with protective foam
• Micro USB cable