BROADCOM HFBR2412TZ - Fiber optic receive module, 820nm, 5 MBd, ST thread, miniature l
28.35 EUR
Examine the detailed sheet with complete information, compare prices and find the features of PRODUCTNAME, on sale at the price of PRICE CURRENCY; it falls into the CATEGORY NAME; the production is done by MANUFACTURER NAME and the sale is managed by SELLER NAME.
HFBR-14xxZ and HFBR-24xxZ Series
Low-Cost, 820 nm Miniature Link Fiber Optic Components with ST, SMA, SC, and FC Ports
Description
The HFBR-24x2Z fiber optic receiver is designed to operate with the Broadcom Ltd. HFBR-14xxZ fiber optic transmitter and 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) fiber optic cable. Consistent coupling into the receiver is assured by the lensed optical system. Response does not vary with fiber size = 0.100 µm. The HFBR-24x2Z receiver incorporates an integrated photo IC containing a photodetector and dc amplifier driving an opencollector Schottky output transistor. The HFBR-24x2Z is designed for direct interfacing to popular logic families. The absence of an internal pull-up resistor allows the open-collector output to be used with logic families such as CMOS requiring voltage excursions much higher than VCC. Both the open-collector Data output Pin 6 and VCC Pin 2 are referenced to Com Pins 3 and 7. The Data output allows busing, strobing and wired OR circuit configurations. The transmitter is designed to operate from a single +5V supply. It is essential that a bypass capacitor (100 nF ceramic) be connected from Pin 2 (VCC) to Pin 3 (circuit common) of the receiver.
Features
• RoHS compliant
• Low-cost transmitters and receivers
• Choice of ST, SMA, SC, or FC ports
• 820 nm wavelength technology
• Signal rates up to 160 MBaud
• Link distances up to several kilometers
• Compatible with 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) Fiber
• Repeatable ST connections within 0.2 dB typical
• Unique optical port design for efficient coupling
• Pick and place, and wave solderable
• No board-mounting hardware required
• Wide operating temperature range –40°C to +85°C
Applications
• 100BASE-SX Fast Ethernet on 850 nm
• Media/fiber conversion, switches, routers, hubs, and NICs on 100BASE-SX
• Local area networks
• Computer-to-peripheral links and computer monitor links
• Digital cross connect links
• Central office switch/PBX links
• Video links
• Modems and multiplexers
• Suitable for Tempest systems
• Industrial control links
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
HFBR-14xxZ and HFBR-24xxZ Series
Low-Cost, 820 nm Miniature Link Fiber Optic Components with ST, SMA, SC, and FC Ports
Description
The HFBR-24x2Z fiber optic receiver is designed to operate with the Broadcom Ltd. HFBR-14xxZ fiber optic transmitter and 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) fiber optic cable. Consistent coupling into the receiver is assured by the lensed optical system. Response does not vary with fiber size = 0.100 µm. The HFBR-24x2Z receiver incorporates an integrated photo IC containing a photodetector and dc amplifier driving an opencollector Schottky output transistor. The HFBR-24x2Z is designed for direct interfacing to popular logic families. The absence of an internal pull-up resistor allows the open-collector output to be used with logic families such as CMOS requiring voltage excursions much higher than VCC. Both the open-collector Data output Pin 6 and VCC Pin 2 are referenced to Com Pins 3 and 7. The Data output allows busing, strobing and wired OR circuit configurations. The transmitter is designed to operate from a single +5V supply. It is essential that a bypass capacitor (100 nF ceramic) be connected from Pin 2 (VCC) to Pin 3 (circuit common) of the receiver.
Features
• RoHS compliant
• Low-cost transmitters and receivers
• Choice of ST, SMA, SC, or FC ports
• 820 nm wavelength technology
• Signal rates up to 160 MBaud
• Link distances up to several kilometers
• Compatible with 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) Fiber
• Repeatable ST connections within 0.2 dB typical
• Unique optical port design for efficient coupling
• Pick and place, and wave solderable
• No board-mounting hardware required
• Wide operating temperature range –40°C to +85°C
Applications
• 100BASE-SX Fast Ethernet on 850 nm
• Media/fiber conversion, switches, routers, hubs, and NICs on 100BASE-SX
• Local area networks
• Computer-to-peripheral links and computer monitor links
• Digital cross connect links
• Central office switch/PBX links
• Video links
• Modems and multiplexers
• Suitable for Tempest systems
• Industrial control links
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
BROADCOM HFBR1531Z - Fiber optic transmitter module, 600nm, 5 MBd, vertical, HiPer-Ve
21.63 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
BROADCOM HFBR2416Z - Fiber optic receive module, 820nm, 160 MBd, ST connector, miniat
39.87 EUR
HFBR-24x6Z Low-Cost 125 MHz ReceiverLow-Cost, 820 nm Miniature Link Fiber Optic Components with FC Ports
Description
The HFBR-24x6Z fiber optic receiver is designed to operate with the Broadcom Ltd. HFBR-14xxZ fiber optic transmitters and 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) fiber optic cable. Consistent coupling into the receiver is assured by the lensed optical system. Response does not vary with fiber size for core diameters of 100 µm or less. The receiver output is an analog signal which allows follow-on circuitry to be optimized for a variety of distance/data rate requirements. Low-cost external components can be used to convert the analog output to logic compatible signal levels for various data formats and data rates up to 175 MBaud. This distance/data rate trade-off results in increased optical power budget at lower data rates which can be used for additional distance or splices. The HFBR-24x6Z receiver contains a PIN photodiode and low noise transimpedance preamplifier integrated circuit. The HFBR- 24x6Z receives an optical signal and converts it to an analog voltage. The output is a buffered emitter follower. Because the signal amplitude from the HFBR-24x6Z receiver is much larger than from a simple PIN photodiode, it is less susceptible to EMI, especially at high signaling rates. For very noisy environments, the conductive or metal port option is recommended. A receiver dynamic range of 23 dB over temperature is achievable, assuming a Bit Error Rate (BER) of 10-9. The frequency response is typically DC to 125 MHz. Although the HFBR-24x6Z is an analog receiver, it is compatible with digital systems. A 10O resistor must be connected between pin 6 and the power supply, and a 100 nF ceramic bypass capacitor must be connected between the power supply and ground. In addition, pin 6 should be filtered to protect the receiver from noisy host systems. Refer to AN 1065 for details.
Features
• RoHS compliant
• Low-cost transmitters and receivers
• Choice of ST, SMA, SC, or FC ports
• 820 nm wavelength technology
• Signal rates up to 160 MBaud
• Link distances up to several kilometers
• Compatible with 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) Fiber
• Repeatable ST connections within 0.2 dB typical
• Unique optical port design for efficient coupling
• Pick and place, and wave solderable
• No board-mounting hardware required
• Wide operating temperature range –40°C to +85°C
Applications
• 100BASE-SX Fast Ethernet on 850 nm
• Media/fiber conversion, switches, routers, hubs, and NICs on 100BASE-SX
• Local area networks
• Computer-to-peripheral links and computer monitor links
• Digital cross connect links
• Central office switch/PBX links
• Video links
• Modems and multiplexers
• Suitable for Tempest systems
•...
BROADCOM HFBR2416TZ - Fibre optic receiver module, 820nm, 160 MBd, FC-with thread, min
33.67 EUR
HFBR-24x6Z Low-Cost 125 MHz ReceiverLow-Cost, 820 nm Miniature Link Fiber Optic Components with FC Ports
Description
The HFBR-24x6Z fiber optic receiver is designed to operate with the Broadcom Ltd. HFBR-14xxZ fiber optic transmitters and 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) fiber optic cable. Consistent coupling into the receiver is assured by the lensed optical system. Response does not vary with fiber size for core diameters of 100 µm or less. The receiver output is an analog signal which allows follow-on circuitry to be optimized for a variety of distance/data rate requirements. Low-cost external components can be used to convert the analog output to logic compatible signal levels for various data formats and data rates up to 175 MBaud. This distance/data rate trade-off results in increased optical power budget at lower data rates which can be used for additional distance or splices. The HFBR-24x6Z receiver contains a PIN photodiode and low noise transimpedance preamplifier integrated circuit. The HFBR- 24x6Z receives an optical signal and converts it to an analog voltage. The output is a buffered emitter follower. Because the signal amplitude from the HFBR-24x6Z receiver is much larger than from a simple PIN photodiode, it is less susceptible to EMI, especially at high signaling rates. For very noisy environments, the conductive or metal port option is recommended. A receiver dynamic range of 23 dB over temperature is achievable, assuming a Bit Error Rate (BER) of 10-9. The frequency response is typically DC to 125 MHz. Although the HFBR-24x6Z is an analog receiver, it is compatible with digital systems. A 10O resistor must be connected between pin 6 and the power supply, and a 100 nF ceramic bypass capacitor must be connected between the power supply and ground. In addition, pin 6 should be filtered to protect the receiver from noisy host systems. Refer to AN 1065 for details.
Features
• RoHS compliant
• Low-cost transmitters and receivers
• Choice of ST, SMA, SC, or FC ports
• 820 nm wavelength technology
• Signal rates up to 160 MBaud
• Link distances up to several kilometers
• Compatible with 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) Fiber
• Repeatable ST connections within 0.2 dB typical
• Unique optical port design for efficient coupling
• Pick and place, and wave solderable
• No board-mounting hardware required
• Wide operating temperature range –40°C to +85°C
Applications
• 100BASE-SX Fast Ethernet on 850 nm
• Media/fiber conversion, switches, routers, hubs, and NICs on 100BASE-SX
• Local area networks
• Computer-to-peripheral links and computer monitor links
• Digital cross connect links
• Central office switch/PBX links
• Video links
• Modems and multiplexers
• Suitable for Tempest systems
•...
BROADCOM HFBR2412Z - Fiber optic receive module, 820nm, 5 MBd, ST connector, miniatur
36 EUR
HFBR-14xxZ and HFBR-24xxZ SeriesLow-Cost, 820 nm Miniature Link Fiber Optic Components with ST, SMA, SC, and FC Ports
Description
The HFBR-24x2Z fiber optic receiver is designed to operate with the Broadcom Ltd. HFBR-14xxZ fiber optic transmitter and 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) fiber optic cable. Consistent coupling into the receiver is assured by the lensed optical system. Response does not vary with fiber size = 0.100 µm. The HFBR-24x2Z receiver incorporates an integrated photo IC containing a photodetector and dc amplifier driving an opencollector Schottky output transistor. The HFBR-24x2Z is designed for direct interfacing to popular logic families. The absence of an internal pull-up resistor allows the open-collector output to be used with logic families such as CMOS requiring voltage excursions much higher than VCC. Both the open-collector Data output Pin 6 and VCC Pin 2 are referenced to Com Pins 3 and 7. The Data output allows busing, strobing and wired OR circuit configurations. The transmitter is designed to operate from a single +5V supply. It is essential that a bypass capacitor (100 nF ceramic) be connected from Pin 2 (VCC) to Pin 3 (circuit common) of the receiver.
Features
• RoHS compliant
• Low-cost transmitters and receivers
• Choice of ST, SMA, SC, or FC ports
• 820 nm wavelength technology
• Signal rates up to 160 MBaud
• Link distances up to several kilometers
• Compatible with 50/125 µm, 62.5/125 µm, 100/140 µm, and 200 µm Plastic-Clad Silica (PCS) Fiber
• Repeatable ST connections within 0.2 dB typical
• Unique optical port design for efficient coupling
• Pick and place, and wave solderable
• No board-mounting hardware required
• Wide operating temperature range –40°C to +85°C
Applications
• 100BASE-SX Fast Ethernet on 850 nm
• Media/fiber conversion, switches, routers, hubs, and NICs on 100BASE-SX
• Local area networks
• Computer-to-peripheral links and computer monitor links
• Digital cross connect links
• Central office switch/PBX links
• Video links
• Modems and multiplexers
• Suitable for Tempest systems
• Industrial control links
BROADCOM HFBR1532Z - Fiber optic transmitter module, 600nm, 1 MBd, vertical, HiPer-Ve
25.4 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
BROADCOM HFBR2521Z - Fibre optic receiver module, 600nm, 5 MBd, horizontal, HiPer-Ver
20.91 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
BROADCOM HFBR2522Z - Fibre optic receiver module, 600nm, 1 MBd, horizontal, HiPer-Ver
28.24 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
BROADCOM HFBR2524Z - Fibre optic receiver module, 600nm, 1 MBd, horizontal, standard
25.35 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
BROADCOM HFBR1521Z - Fibre optic transmitter module, 600nm, 5 MBd, horizontal, HiPer-
21.94 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
FIRECOMMS FR05DHCR - Fiber Optic Receiving Module, 650nm, 5 MBd, horizontal
22.97 EUR
"The Firecomms DC to 5 MBd RedLink® dual-supply receiver is based on a fully integrated photodiode with TIA, limiting amplifier and an open collector output. The receiver is installed in a non-conductive plastic RedLink® connector housing. The housing is compatible with the Versatile Linkstyle fiber connector and is primarily designed for use with Plastic Optical Fiber (POF).The receiver works equally with the standard supply voltages 3.3 V and 5 V DC. It operates over the industrial temperature range of --40°C to +85°C and supports many industrial applications where an adhesive command and control response is required in electrically harsh environments.
- Designed for use with Plastic Optical Fiber (POF)
- Optimized for data rates from DC to 5 MBd
- Open collector output
- Industrial temperature range -40 °C to +85 °C.
- Operation with two power supplies (5 V and 3.3 V)
- RoHS compliant and flame retardant (UL 94 V-0) housing
- Horizontal, vertical and 30° inclined design
- Low pulse width distortion
- Compatible with Versatile Link cables and plugs
FIRECOMMS FR05DHDR - Fiber Optic Receiving Module, 5 MBd, horizontal
20.49 EUR
"The Firecomms RedLink® FR05DxDR receiver is based on a fully integrated photodiode with TIA, limiting amplifier and MOSFET open drain output that allows switching voltages in the range of 3 to 20 V (e.g. 3.3, 5, 12, 15 V). The component also includes an optional 1 Ko pull-up resistor RL.The RedLink® receiver plug is installed in a non-conductive plastic housing. The housings are compatible with the Versatile-Link fiber connector and are optimized for use with plastic fiber optic cables (POF).
- MOSFET output stage typically used for switching 12V and 15V thyristor gate devices
- Optimized for data rates from DC to 5 MBd
- Industrial temperature range -40 °C to +85 °C.
- Flame retardant (UL 94 V-0) plug housings
- Fully integrated photodiode, TIA and limiting amplifier in a single IC
- Built-in 1O k pull-up resistance to VCC (RL)
- Low pulse width distortion
- Horizontal, vertical and 30° tilted version
- Compatible with Versatile Link cables and plugs
FIRECOMMS FR05DHIR - Fiber Optic Receiving Module, 650nm, 5 MBd, horizontal
22.97 EUR
"The Firecomms DC up to 5 MBd RedLink® dual-supply receiver is based on a fully integrated photodiode with TIA and limit amplifier. The receiver is installed in a non-conductive plastic RedLink® connector housing. The housing is compatible with the Versatile Link Style Fiber connector and is primarily designed for use with Plastic Optical Fiber (POF). The receiver operates equally with the standard supply voltages 3.3 V and 5 V DC. It operates over the industrial temperature range of --40°C to +85°C and supports many industrial applications that require reliable command and control response in electrically harsh environments.
- Designed for use with Plastic Optical Fiber (POF)
- Optimized for data rates from DC to 5 MBd
- Industrial temperature range -40 °C to +85 °C.
- Operation with two power supplies (5 V and 3.3 V)
- RoHS compliant and flame retardant (UL 94 V-0) housing
- Horizontal, vertical and 30° tilted version
- Push-pull TTL compatible CMOS output
- Low pulse width distortion
- Compatible with Versatile Link cables and plugs
BROADCOM HFBR1522Z - Fibre optic transmitter module, 600nm, 1 MBd, horizontal, HiPer-
25.87 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
RAK WIRELESS RAK W118 - Fiber optic antenna 5.8 dBi LoRaWAN
71.92 EUR
"The RAK Wireless ipex Fiberglass Antenna 5.8 dBiThe second generation RAK LoRa antennas is a high performance omnidirectional monopole.
All LoRa bands are supported.
To select the appropriate antenna in relation to your region's LoRa frequency, please refer to the TTN guide and/or regional parameters documentation provided by the LoRa Alliance.
- Frequency range: 860 - 930 MHz
- Gain: 5.1 - 5.8 dBi
- VSWR: 2.0
- Impedance: 50 Ohm
- Polarization: Vertical
- Type: Dipole
- Housing: Fiberglass
- Connector: N-Type Male
- Length: 800 mm
Scope of delivery:
- 1x antenna
- 1x pigtail interface converter
- 2x mounting brackets
BROADCOM HFBR1528Z - Fibre optic transmission module, 600nm, 10 MBd, horizontal, HiPe
31.24 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
BROADCOM HFBR2531Z - Fibre optic receiver module, 600nm, 5 MBd, vertical, HiPer-Versa
23.8 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
BROADCOM HFBR2532Z - Fibre optic receiver module, 600nm, 1 MBd, vertical, HiPer-Versa
27.47 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
FIRECOMMS FR01DHDR - Fiber Optic Receiving Module, 1 MBd, horizontal
22.97 EUR
"The Firecomms FR01DxDR RedLink® receiver is based on a fully integrated photodiode with TIA, limiting amplifier and MOSFET open drain output that allows switching voltages in the range of 3 to 20 V (e.g. 3.3, 5, 12, 15 V). The component also includes an optional 1 Ko pull-up resistor RL. The RedLink® receiver plug is installed in a non-conductive plastic housing. The housings are compatible with the Versatile-Link fiber connector and are optimized for use with plastic fiber optic cables (POF).- MOSFET output stage normally used for direct switching of 12 V and 15 V thyristor gate devices
- Optimized for data rates from DC to 1 MBd
- Industrial temperature range -40 °C to +85 °C.
- Flame retardant (UL 94 V-0) plug housings
- Fully integrated photodiode, TIA and limiting amplifier in a single IC
- 5V TTL/CMOS compatible I/O for simplified design
- integrated 1 k? Pull-up resistance to VCC (RL)
- Low pulse width distortion
- Horizontal, vertical and 30° tilted options
- Compatible with Versatile Link cables and plugs
FIRECOMMS FT05MHNR - Fiber optic transmitter module, 650nm, 5 MBd, horizontal
21.53 EUR
"The Firecomms DC to 5 MBd RedLink® transmitter is based on the highly reliable Resonant Cavity Light Emitting Diode (RCLED) technology developed by Firecomms.It is installed in a non-conductive RedLink® plastic connector. The housings are compatible with the Versatile-Link fiber connector and optimized for use with Plastic Optical Fiber (POF) and Plastic Clad Silica (PCS) fibers. The transmitter can be controlled by TTL logic drivers. It operates over the industrial temperature range of --40°C to +85°C and supports many industrial applications that require reliable command and control response in electrically harsh environments.
- Ideal for use with POF
- Optimized for data rates from DC to 5 MBd
- Industrial temperature range -40 °C to +85 °C.
- RoHS and UL compliant
- Flame retardant (UL 94 V-0) plug housings
- Horizontal, vertical and 30° tilted version
- RCLED transmitter with visible red light (650 nm wavelength)
- Low pulse width distortion
- Compatible with Versatile Link cables and plugs
FIRECOMMS FR50MHIR - Fiber Optic Receiving Module, 650nm, 50 MBd, horizontal
27.62 EUR
"The Firecomms DC-50 MBd RedLink® receiver is a fully integrated photodiode and receiver IC. The receiver is installed in a miniature housing and can be connected to plug-in lengths of Plastic Optical Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fibers. In conjunction with the appropriate transmitter, the receiver can transmit digital signals at 50 Mbps over fiber and operate in the temperature range from -40 °C to +85 °C.- For use with POF or PCS fibers
- Optimized for data rates from DC to 50 MBd
- Industrial temperature range -40 °C to +85 °C.
- Dual 5V and 3.3V power supplies with 10% rail tolerance
- RoHS compliant and flame retardant (UL 94 V-0)
- Inverting and non-inverting versions
- Horizontal, vertical and 30° tilted aluminum guide
- Push-pull TTL compatible CMOS output
- Ultra-low pulse width distortion to limit pulse distortion of burst mode data
- Compatible with Versatile Link cables and plugs
FIRECOMMS FR50MHNR - Fiber Optic Receiving Module, 650nm, 50 MBd, horizontal
27.62 EUR
"The Firecomms DC-50 MBd RedLink® receiver is a fully integrated photodiode and receiver IC. The receiver is installed in a miniature housing that can be connected with pluggable lengths of optical plastic fibers (POF) or 200 µm plastic clad silica (PCS) fibers. In conjunction with the appropriate transmitter, the receiver can transmit digital signals at 50 Mbps over fiber and operate in the temperature range from -40 °C to +85 °C.- Ideal for use with POF or PCS fibers
- Optimized for data rates from DC to 50 MBd
- Industrial temperature range -40 °C to +85 °C.
- Dual 5V and 3.3V power supplies with 10% rail tolerance
- RoHS compliant and flame retardant (UL 94 V-0)
- Inverting and non-inverting versions
- Horizontal, vertical and 30° tilted version
- Push-pull TTL compatible CMOS output
- Ultra-low pulse width distortion to limit pulse distortion of burst mode data
- Compatible with Versatile Link cables and plugs
FIRECOMMS FT01MVNR - Fiber Optic Transmit Module, 1 MBd, vertical
22.97 EUR
"The Firecomms DC to 1 MBd RedLink® transmitter is based on the highly reliable Resonant Cavity Light Emitting Diode (RCLED) technology developed by Firecomms. It is installed in a non-conductive RedLink® plastic connector. The housings are compatible with the Versatile-Link fiber connector and optimized for use with Plastic Optical Fiber (POF) and Plastic Clad Silica (PCS) fibers. The transmitter can be controlled by TTL logic drivers. It operates over the industrial temperature range of --40°C to +85°C and supports many industrial applications that require reliable command and control response in electrically harsh environments.- Ideal for use with POF
- Optimized for data rates from DC to 1 MBd
- Industrial temperature range -40 °C to +85 °C.
- RoHS and UL compliant
- Flame retardant (UL 94 V-0) plug housings
- Horizontal, vertical and 30° tilted version
- RCLED transmitter with visible red light (650 nm wavelength)
- Low pulse width distortion
- Compatible with Versatile Link cables and plugs
FIRECOMMS FR10DHNR - Fiber Optic Receiving Module, 650nm, 10 MBd, horizontal
26.9 EUR
"The Firecomms DC-10 MBd RedLink® receiver is a fully integrated photodiode and receiver IC. The receiver is installed in a miniature housing and can be connected to pluggable lengths of Plastic Optical Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fibers. In conjunction with the appropriate transmitter, the receiver can transmit 10 MBd digital signals over the fiber and operate in the temperature range from -40 °C to +85 °C. The device can be operated with 5 V or 3.3 V DC and can withstand ± 10% supply fluctuations. - Ideal for use with POF or PCS fibers
- Optimized for data rates from DC to 10 MBd
- Industrial temperature range -40 °C to +85 °C.
- Dual 5V and 3.3V power supplies with 10% rail tolerance
- RoHS compliant and flame retardant (UL 94 V-0) housing
- Inverting and non-inverting versions
- Horizontal, vertical and 30° tilted version
- Push-pull TTL compatible CMOS output
- Ultra-low pulse width distortion to limit pulse distortion of burst mode data
- Compatible with Versatile Link cables and plugs
FIRECOMMS FR10DHIR - Fiber Optic Receiving Module, 650nm, 10 MBd, horizontal
26.9 EUR
"The Firecomms DC-10 MBd RedLink® receiver is a fully integrated photodiode and receiver IC. The receiver is installed in a miniature housing and can be connected to pluggable lengths of Plastic Optical Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fibers. In conjunction with the appropriate transmitter, the receiver can transmit 10 MBd digital signals over the fiber and operate in the temperature range from -40 °C to +85 °C. The device can be operated with 5 V or 3.3 V DC and can withstand ± 10% supply fluctuations. - Ideal for use with POF or PCS fibers
- Optimized for data rates from DC to 10 MBd
- Industrial temperature range -40 °C to +85 °C.
- Dual 5V and 3.3V power supplies with 10% rail tolerance
- RoHS compliant and flame retardant (UL 94 V-0) housing
- Inverting and non-inverting versions
- Horizontal, vertical and 30° inclined design
- Push-pull TTL compatible CMOS output
- Ultra-low pulse width distortion to limit pulse distortion of burst mode data
- Compatible with Versatile Link cables and connectors
FIRECOMMS FR01DVDR - Fiber Optic Receiving Module, 1 MBd, vertical
21.73 EUR
"The Firecomms FR01DxDR RedLink® receiver is based on a fully integrated photodiode with TIA, limiting amplifier and MOSFET open drain output that allows switching voltages in the range of 3 to 20 V (e.g. 3.3, 5, 12, 15 V). The component also includes an optional 1 Ko pull-up resistor RL.The RedLink® receiver plug is installed in a non-conductive plastic housing. The housings are compatible with the Versatile-Link fiber connector and are optimized for use with plastic fiber optic cables (POF).
- MOSFET output stage, which typically switch to direct 12 V and 15 V thyristor gate devices.
- Optimized for data rates from DC to 1 MBd
- Industrial temperature range -40 °C to +85 °C.
- Flame retardant (UL 94 V-0) plug housings
- Fully integrated photodiode, TIA, and limiter amplifiers in a single IC 5V TTL/CMOS compatible I/O for simple design
- Built-in 1 Ko pull-up resistance to VCC (RL)
- Low pulse width distortion
- Horizontal, vertical and 30° tilted version
- Compatible with Versatile Link cables and plugs
FIRECOMMS FT50MHIR - Fiber optic transmitter module, 650nm, 50 MBd, horizontal
27.62 EUR
"The Firecomms DC-50 MBd RedLink® transmitter consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with an integrated driver IC as a visible optical transmitter. The device is installed in a miniature housing that can be connected to plug-in lengths of Plastic Optical Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fibers. It can transmit 50 MBd digital signals over fiber and operates in the temperature range of -40 °C to +85 °C. The device can be operated with 5 V or 3.3 V DC and can withstand ± 10% supply fluctuations.- Visible RCLED at red wavelength (650 nm)
- Optimized for data rates from DC to 50 MBd
- Industrial temperature range -40 °C to +85 °C.
- Dual 5V and 3.3V power supplies with 10% rail tolerance
- RoHS compliant and flame retardant (UL 94 V-0)
- Inverting and non-inverting versions
- Horizontal, vertical and 30° tilted version
- Push-pull TTL compatible CMOS output
- Ultra-low pulse width distortion to limit pulse distortion of burst mode data
- Compatible with Versatile Link cables and plugs
FIRECOMMS FT50MHNR - Fiber optic transmitter module, 650nm, 50 MBd, horizontal
27.62 EUR
"The Firecomms DC-50 MBd RedLink® transmitter consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with an integrated driver IC as a visible optical transmitter. The device is installed in a miniature housing that can be connected to plug-in lengths of Plastic Optical Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fibers. The device can transmit 50 MBd digital signals over the fiber and operate in the temperature range from -40 °C to +85 °C. The device can be operated with 5 V or 3.3 V DC and can withstand supply fluctuations of ± 10%.- Visible RCLED at red wavelength (650 nm)
- Optimized for data rates from DC to 50 MBd
- Industrial temperature range -40 °C to +85 °C.
- Dual 5V and 3.3V power supplies with 10% rail tolerance
- RoHS compliant and flame retardant (UL 94 V-0)
- Inverting and non-inverting versions
- Horizontal, vertical and 30° tilted version
- Push-pull TTL compatible CMOS output
- Ultra-low pulse width distortion to limit pulse distortion of burst mode data
- Compatible with Versatile Link cables and plugs
BROADCOM HFBR1524Z - Fiber optic transmitter module, 600nm, 1 MBd, horizontal, standa
24.94 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
FIRECOMMS FT10DHNR - Fiber optic transmitter module, 650nm, 10 MBd, horizontal
26.9 EUR
"The Firecomms DC-10 MBd RedLink® transmitter consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with an integrated driver IC as a visible optical transmitter. The device is installed in a miniature housing and can be connected to plug-in lengths of Plastic Optical Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fibers. It can transmit 10 MBd digital signals over optical fibers and operate in the temperature range from -40 °C to +85 °C. The device can be operated with a 5 V or 3.3 V DC busbar and can withstand supply fluctuations of ± 10%.- Fully integrated driver IC with visible RCLED at red wavelength (650 nm)
- Optimized for data rates from DC to 10 MBd
- Industrial temperature range -40 °C to +85 °C.
- Operates with two power supplies (5 V, 3.3 V) with 10% rail tolerance
- RoHS compliant and flame retardant (UL 94 V-0)
- Inverting and non-inverting versions
- Horizontal, vertical and 30° tilted version
- Compatible with Versatile Link cables and plugs
FIRECOMMS FT10DHIR - Fiber optic transmitter module, 650nm, 10 MBd, horizontal
23.34 EUR
"The Firecomms DC-10 MBd RedLink® transmitter consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with an integrated driver IC as a visible optical transmitter. The device is installed in a miniature housing and can be connected to plug-in lengths of Plastic Optical Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fibers. The device can transmit 10 MBd digital signals over optical fibers and operates in the temperature range from -40 °C to +85 °C. The device can be operated on a 5 V or 3.3 V DC busbar and can tolerate ± 10% supply fluctuations. - Fully integrated driver IC with visible RCLED at red wavelength (650 nm)
- Optimized for data rates from DC to 10 MBd
- Industrial temperature range -40 °C to +85 °C.
- Operates with two power supplies (5 V, 3.3 V) with 10% rail tolerance
- RoHS compliant and flame retardant (UL 94 V-0)
- Inverting and non-inverting versions
- Horizontal, vertical and 30° tilted version
- Compatible with Versatile Link cables and plugs
FIRECOMMS FT10MHLR - Fiber optic transmitter module, 650nm, 10 MBd, horizontal
20.23 EUR
"Firecomms' RedLink® transmitter (DC up to 10 MBd) with low power consumption is a highly reliable Resonant Cavity Light Emitting Diode (RCLED), which generates red 650 nm light as a visible optical source at data rates from DC in burst mode up to a maximum of 10 MBd of continuous digital data. The RCLED is encapsulated in a lens-mounted, clear plastic housing to ensure optimal coupling with Plastic Optical Fiber (POF). It operates in the industrial temperature range from -40 °C to +85 °C.- Visible RCLED at red wavelength (650 nm)
- Optimized for data rates from DC to 10 MBd with low power consumption
- Ideal for use with Step Index (SI) Plastic Optical Fiber (POF)
- Industrial temperature range -40 °C to +85 °C.
- RoHS compliant
- Flame retardant (UL 94 V-0) plug housings
- Low pulse width distortion
- Horizontal, vertical and 30° tilted version
- Compatible with Versatile Link cables and plugs
BROADCOM HFBR2523Z - Fibre optic receiver module, 600nm, 40 kBd, hor., ExtDistance-Ve
27 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
BROADCOM HFBR1523Z - Fibre optic transmitter module, 600nm, 40 kBd, horizontal, ExtDi
27.62 EUR
HFBR-x5xxZ Series, The Versatile Fiber Optic ConnectionDescription
The Versatile Link series is a complete family of fiber optic link components for applications requiring a low cost solution. The HFBR-0500Z series includes transmitters, receivers, connectors and cable specified for easy design. This series of components is ideal for solving problems with voltage isolation/insulation, EMI/ RFI immunity or data security. The optical link design is simplified by the logic compatible receivers and complete specifications for each component. The key optical and electrical parameters of links configured with the HFBR-0500Z family are fully guaranteed from 0° to 70°C. A wide variety of package configurations and connectors provide the designer with numerous mechanical solutions to meet application requirements. The transmitter and receiver components have been designed for use in high volume/low cost assembly processes such as auto insertion and wave soldering. Transmitters incorporate a 660 nm LED. Receivers include a monolithic dc coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor is available for use in the HFBR-25X1Z/ 2Z/4Z receivers. A shield has been integrated into the receiver IC to provide additional, localized noise immunity. Internal optics have been optimized for use with 1 mm diameter plastic optical fiber. Versatile Link specifications incorporate all connector interface losses. Therefore, optical calculations for common link applications are simplified.
Features
• RoHS-compliant
• Low cost fiber optic components
• Enhanced digital links: dc-5 MBd
• Extended distance links up to 120 m at 40 kBd
• Low current link: 6 mA peak supply current
• Horizontal and vertical mounting
• Interlocking feature
• High noise immunity
• Easy connectoring: simplex, duplex, and latching connectors
• Flame retardant
• Transmitters incorporate a 660 nm red LED for easy visibility
• Compatible with standard TTL circuitry
Applications
• Reduction of lightning/voltage transient susceptibility
• Motor controller triggering
• Data communications and local area networks
• Electromagnetic Compatibility (EMC) for regulated systems: FCC, VDE, CSA, etc.
• Tempest-secure data processing equipment
• Isolation in test and measurement instruments
• Error free signalling for industrial and manufacturing equipment
• Automotive communications and control networks
• Noise immune communication in audio and video equipment
TRENDNET TRN TC-K05LC - Keystone Module, LC-Duplex, 5 pack
35.74 EUR
"LC Duplex Fiber Optic Keystone Coupling Sockets - Pack of 5- Pack of 5 tool-less LC fiber keystone jacks
- Compatible with singlemode and multimode fiber optics
- Duplex LC sockets with protective caps
- LC fiber jack to jack coupling
- Supports OM1, OM2, OM3, OM4 and OS2 fiber optic cables
- For use with TC-KP24SA shielded empty keystone patch panel (sold separately)
TRENDnet's LC duplex fiber optic keystone coupling jacks (5-pack), model TC-K05LC, contain five LC duplex fiber optic keystone coupling jacks for use with TRENDnet's TC-KP24SA shielded keystone patch panel.
These fiber optic keystone jacks are designed for Gigabit and 10G fiber optic network applications.
Each keystone jack is designed for use with single-mode or multimode fiber optic cables.
The LC fiber jack design makes it easy to connect two fiber patch cables together.
These LC duplex fiber optic coupling jacks feature a convenient tool-less snap-in design for easy installation."
MOBOTIX MX O-M7SA-8L280 - Sensor module, tele, 15° LPF
537.04 EUR
"15° 4K LPF sensor module TELEM73 / S74 sensor module with premium telephoto lens
- LPF special optics e.g. for license plate recognition (with infrared light)
- Aperture: f/1.8
- Max. angle of view (HxV): 15°x8.5°
- Max. resolution: 4K UHD (3840x2160)
- IP66
- white
Compatibility
- M73 cameras
- S74 cameras
Technical data
- Horizontal angle of view: 15°
- Vertical angle of view: 8.5°
- Focal length: 28 mm
- Aperture: 1.8
- Max. Image size: 4K UHD (3840x2160)
SHIVERPEAKS SHVP BS08-10212 - Keystone module, SC simplex, OM3, aqua
12.53 EUR
"shiverpeaks®-BASIC-S--LWL-Keystone connector, SC-SC, Simplex, aquaFiber optic keystone connector suitable for distributors, patch panels, junction boxes or other applications.
With the fiber optic keystone connector, you can easily connect two fiber optic patch cables.
The dimensions of the keystone modules all follow a standard, which means they can be easily mounted in the brackets provided.
- Connections: SC simplex socket to SC simplex socket
- for polishing type: Ultra Physical Contact (UPC) or Physical Contact (PC)
- Alignment sleeve material: Ceramic
- for fiber mode: Multimode
- for category: OM3
- Mounting type: without flange, with metal clip, keystone design
- Connection style: Simplex
- Operating temperature: -40 to +85 °C
- Storage temperature: -40 to +70 °C
- Color: aqua
- Housing material: PC, ABS
- with dust protection caps
LOGILINK FS4LC01 - Fiber optic patch cable, LC duplex, 5/125 µm, OM4, 1 m
16.1 EUR
"LogiLink's ultra-thin patch cables require significantly less space than conventional patch cables. This is especially advantageous when space is at a premium. Their thin and flexible structure makes them easier to bend. This makes them ideal for high-density environments.- Super slim 1.2 mm fiber optic patch cable
- Duplex Jumper 50/125µ Multimode
- Connector: 2 x LC/UPC -> 2x LC/UPC
- Jacket: LSZH, erika violet, only 1.2 mm Ø
- Application: up to 40 Gbit/s / 125 m
- Standard: ISO/IEC 11801, IEC60793-2-10, IEC-61753-222-2
- Quality: Each cable comes with a test report
TELEGÄRTNER TG 100012360 - Fiber Optic Adapter Cable, E9/125, OS2, SC / LC, yellow, 5 m
30.2 EUR
"Fiber-Optic Patch CablesTelegärtner's LC-Duplex fiber optic patch cables can be used within a structured cabling system (ISO/IEC 11801) in locations such as data centers, office buildings, telecommunications rooms, and anywhere else where fiber optic patch cables are needed.
Of all the components in a transmission path, patch cables are subjected to the highest stresses and the greatest wear and tear.
That is why many users rely on Telegärtner patch cables: optimally matched components, the highest quality standards, a fully controlled manufacturing process, and 100% attenuation testing guarantee secure, reliable network operation.
- LC-Duplex fiber optic patch cables for structured cabling according to ISO/IEC 11801
- Ideal for data centers, offices, and telecommunications rooms
- High load capacity and wear resistance
- 100% attenuation testing for verified quality
- Controlled manufacturing process
- Optimally matched components
- Secure and reliable network operation
- Bend-optimized fibers (OM3-OM5 and OS2)
- Optimal signal transmission even with tight bend radii
The patch cords in the OM3-OM5 (IEC 60793-2-10 Type A1a.2-4, ITU G.651.1) and OS2 (IEC 60793-2-50 Type B1.3, ITU G.657.A1) also feature bend-optimized fibers to ensure optimal transmission even in confined spaces."
LOGILINK FS4LC07 - Fiber optic patch cable, LC duplex, 50/125 µm, OM4, 7.5 m
25.4 EUR
"LogiLink's ultra-thin patch cables require significantly less space than conventional patch cables. This is especially advantageous when space is at a premium. Their thin and flexible structure makes them easier to bend. This makes them ideal for high-density environments.- Super slim 1.2 mm fiber optic patch cable
- Duplex Jumper 50/125µ Multimode
- Connector: 2 x LC/UPC -> 2x LC/UPC
- Jacket: LSZH, erika violet, only 1.2 mm Ø
- Application: up to 40 Gbit/s / 125 m
- Standard: ISO/IEC 11801, IEC60793-2-10, IEC-61753-222-2
- Quality: Each cable comes with a test report