Review Benning cflex 2 cflex 2 with truerms digital display

BENNING CM 2-1 - Clamp meter CM2-1, digital, AC/DC, up to 400 A 280.14 EUR "Digital current clamp multimeter BENNING CM 2-1: Multifunctional and powerful thanks to TRUE RMS measuring method for industrial applications.

Precise current measurement up to 400 A AC / DC
Measure high currents safely and without contact
Measurement of small currents (motor vehicles, photovoltaics, industry)
Voltage measurement up to 600 V AC / DC
Resistance measurements up to 40 MO
Frequency and capacitance measurement
Acoustic and optical continuity test
Diode test
AutoV function with low input impedance (LoZ) to suppress ""reactive voltages""
Low pass filter (HFR high frequency suppression, 800 Hz) for measurements on clocked motor drives
Volt sensor for contactless phase and cable break testing (LCD / buzzer)
Protective bag, test leads and batteries included

"

SEE OFFER SEE OFFER ebay

BENNING CM 1-4 - Current/voltage clamp, digital, up to 200 A AC, 1000 V AC/DC 315.28 EUR "BENNING CM 1-4 - Open TRUE RMS current clamp meter with LC display and LED level indicator.

Product advantages:

Current measurement up to 200 A AC via open current clamp
Voltage measurement up to 1000 V AC/DC (with/without signal tone), above 50 V no batteries required
LED level indicator: 12, 50, 120, 230, 400, 690, 1000 V
Precise due to true rms measuring method TRUE RMS
Rotating field direction check via green LEDs (right/left)
Single-pole phase testing via red LED
Continuity check via buzzer and red LED
Polarity check via +/- LED
One-hand operation for voltage measurement at sockets (19 mm)
LED measuring point lighting
Measured value memory (HOLD)
Measurement category CAT IV 600 V, CAT III 1000 V
Incl. belt holster, measuring lead set, tip protection, contact tip enlarger, batteries

Industrial environments demand TRUE RMS - measuring instruments!

Non-linear loads caused, for example, by motor drives with adjustable speed, frequency converters or power supplies for office equipment and LED lights, generate reactive power in the mains. As a result, multimeters and current clamps with the averaging measurement method (RMS) display the measured values less accurately.

In many cases and especially in industrial environments the use of modern true RMS measuring instruments is necessary. The TRUE RMS measuring method correctly displays the actual, effective value of an alternating current - regardless of whether the signal form of the current is sinusoidal or distorted."

SEE OFFER SEE OFFER ebay

BENNING TRITEST PRO - Continuity tester, circuit tester and phase display 92.95 EUR "TRITEST® pro – Professional rotating field direction indicator for testing the rotating field direction in three-phase supply systems

Features:
• Display of ""right"" and ""left rotating field"" via green/red LED
• Display of the phase voltages L1, L2 and L3 via red LED
• Voltage range: 400 V - 500 V AC (50 Hz - 60 Hz)
• Bright, pinpoint, high-performance LED torch
• Required batteries: 3 x 1.5 V Mignon/AA
• Integrated magnetic holder and belt clip on the rear of enclosure
• Includes 4 mm test probe kit and alligator clip
• Measurement category: CAT lll 300 V
• Shock-resistant and impact-resistant enclosure
• including measuring lead/test probe kit, alligator clip

Technical data:
LED display: 3 x yellow, 2 x red
Rotating field indicator (green/red LED): right/left rotating field
Voltage range: 400 - 500 V AC (50 Hz - 60 Hz)
Bright LED torch: Yes, adjustable in 1 stages
Magnetic holder and belt clip: Yes
Safety: DIN EN 61010-1, DIN EN 61557-7
Measurement category: CAT III 300 V
Batteries required: 3 x 1.5 V Mignon batteries (AA)"

SEE OFFER SEE OFFER ebay

VAL MS0115 - VA-LABs TrueRMS Digital Multimeter, 6000 Counts, 600 V, 10 A, NC 37.85 EUR "The MS0115 TRMS digital multimeter with automatic range selection and a display range of 6,000 counts is the ideal all-rounder among multimeters and equips the user perfectly for all standard measurement tasks. The meter has all the relevant basic measurement functions, such as AC/DC voltage and current measurement up to 600 V / 10 A, resistance, capacitance and frequency measurement. In addition, the CAT III multimeter offers a TrueRMS (true RMS) measurement function as well as important special functions such as a non-contact voltage detection (NCV), continuity and diode test function as well as live test function. The MS0115 also has a robust and handy housing with an integrated LED work light, which can be switched on if required and ensures reliable measurement even in poorly lit environments.

Features:

Display range: 6,000 counts display, illuminated
TrueRMS (true rms measurement)
Measuring range selection: automatic
Voltage measurement up to 600 V AC/DC
Current measurement up to 10 A AC/DC
Resistance measurement up to 60 MOhm
Capacitance measurement up to 60 mF
Frequency measurement up to 10 MHz
Duty cycle: 1 - 99
TRMS multimeter with integrated LED work light for poorly lit measuring environments
non-contact voltage testing (NCV) with acoustic and LED alarm
Live test function
continuity test and diode test
measurement value hold function (data hold)
automatic shutdown (can be deactivated) and low battery indicator
Safety: CAT III 600 V, EN61010-1

Scope of delivery:
MS0115 digital multimeter, test leads, manual, batteries."

SEE OFFER SEE OFFER ebay

KERN-SOHN HCD 300K-2D - Crane scale, digital, up to 150/ 300 kg 226.96 EUR "High-resolution crane scale for high loads.

Fully-fledged crane scales for lower to medium load ranges. The massive design provides for an increase in safety (TUV tested). Thanks to the large LCD display and the remote control supplied as standard, it can also be read and operated safely from a greater distance
The scales comply with the requirements of standard EN 13155 (loose load sensor) and EN 61010-1 (electrical safety) with the TUV test mark
High mobility: Thanks to battery operation and compact, lightweight design suitable for use in several locations (production, storage, shipping)
Hold function: When weighing is in progress, the weight display is automatically frozen until the hold button is pressed
Taring: Resets the display to ""0"" when the scale is loaded. Now, loads that have been removed or added are displayed directly
Battery level indicator, optical by LED
Large, high-contrast display, facilitates reading
Stand-by function: Automatic switch-off of the display after 5 minutes without changing the load. Automatic activation at any key press
Hook with safety lock, rotatable
Infrared remote control as standard. Wireless range up to 20 m. All functions can be selected. Batteries included

Weighing range: Max. 150/ 300 kg
Readability: 50/ 100 g
Calibration: Possible on request"

SEE OFFER SEE OFFER ebay

PEAKTECH 5140 - PeakTech 5140 digital thermometer 2-channel 79.62 EUR Digital thermometer, 2-channel

A new, innovative digital thermometer in a modern and practical design with 3½-digit, triple display, max. 1999, function symbols and backlight for fast response time and laboratory-standard precision. Practical push buttons for convenient and ergonomic one-hand operation. This thermometer uses K-type thermocouples, provides a resolution of 0.1° and is extremely versatile in various sectors including refrigeration, food production and storage, agriculture, chemicals and industry

• K-type thermometer with dual input
• Temperature range: -200 - +1372°C
• For direct measurements or differential measurements (T1-T2)
• Option for measuring temperature difference to absolute zero point in Kelvin
• Relative temperature rise and fall time measurement
• Electronic offset function allows compensation of thermocouple errors to maximise accuracy
• Reading in° C, °F or Kelvin (K)
• Automatic switch-off
• Supplied accessories: case, thermocouple probe P TF-50, universal temperature sensor P TF-55, batteries and user manual.

Technical data:
• Measurement functions: Celsius (C), Fahrenheit (F), Kelvin (K)
• Temp. ranges: -200 - +1372°C ± 0.5% + 2°C/-328 - +2501°F ± 0.5% + 4°F/73 - 1645 K ± 0.5% + 2 K
• Input: dual
• Operating voltage: 3 x 1.5 V AAA batteries
• Dimensions (W x H x D): 60 x 160 x 30 mm
• Weight: 180 g

SEE OFFER SEE OFFER ebay

BENNING MM 6-2 - TRMS digital multimeter, MM 6-2 244.89 EUR "Suitable for industry (TRUE RMS, CAT IV 600 V), electrical engineering and service.

4-digit, backlit LCD display (6000 points)
Basic accuracy: 0.5%
DC/AC voltage (0.1 mV - 1000 V), DC/AC current (1 mA - 10 A)
Resistance (0.1 Ohm - 40 mOhm), frequency (0.01 Hz - 100 kHz), capacity (1 nF - 10 mF)
Continuity test (20 Ohm) (red LED/buzzer)/diode test (1.5 V)
Precision thanks to TRUE RMS
The AutoV function allows automatic AC/DC voltage detection and low input impedance (LoZ) for suppressing capacitively/inductively interspersed voltages
Integrated volt sensor for non-contact signalling of phase voltages and cable breaks in wires (visually/acoustically), single-pole phase test
Automatic/manual range selection, automatic shut-off, battery undervoltage display
Storage for measured values (HOLD) and peak values (PEAK), relative measurement (REL)
Measurement category: CAT IV 600 V, CAT III 1000 V
Includes rubber holster with magnetic hanger, carry case, battery (1x 9 V block/LR61), measuring leads

"

SEE OFFER SEE OFFER ebay

UNI-TREND UT 320D - Digital thermometer, -40 to +260°C, 2 channel 30.61 EUR "UT320D Mini Contact Type Thermometer

The UT320D is a dual channel contact thermometer. This high accuracy thermometer has a wide temperature range. It can be used with both K and J temperature probes.
Furthermore, this device has the ability to display both temperatures simultaneously and determines a difference.

4 times /s sampling rate
maximum / minimum / average
Backlight
K / J thermocouple probe selection
Differential measurement: T1 ~ T2
Automatic power off
Low battery indicator

Measuring range of the instrument:
Type K: -50 - 1300 °C ±(0.5%+1)
Type J: -50 - 1200 °C ±(0.5%+1)
Measuring range of the sensors: -40 ... +260 °C
dimensions: 120 x 53 x 28 mm
Weight: 60 g
Required batteries: 3x Micro (AAA)

Scope of delivery:
1x UT 320D device
3x battery, Micro (AAA)
2x temperature sensor type-K (approx. 90 cm cable length)"

SEE OFFER SEE OFFER ebay

BENNING MM 5-2 - Digital handheld multimeter, MM 5-2 222.25 EUR "True RMS digital multimeter in measuring category CAT III 600 V, CAT IV 300 V

The True RMS measurement procedure can be used in demanding measuring tasks and for precise troubleshooting in electrical equipment. The measurement functions are designed to meet the varied requirements of electricians in trade, industry and service as well as the requirements of heating and air-conditioning technicians.

Range of up to 6000 digits, 16 mm digit height
Basic accuracy: 0.5%
True RMS AC and DC voltage measurement up to 600 V
Resistance (40 MOhm), frequency (50 kHz) and capacitance measurement (1 mF)
Continuity test via buzzer and red LED for noisy environments
Diode testing to 1.5 V forward voltage
Volt sensor for contact-free testing of phase voltage and locating of cable breaks in wires
True RMS AC and DC current measurement up to 10 A
Temperature measurement and micro amp current range (DC) for performing maintenance and troubleshooting on heating, ventilation and air-conditioning systems
Compact, practical housing design
Rubber protective holster for use in harsh industrial environments
Can be hung up using integrated magnets in the rubber holster
Large LCD display with backlighting
Measurement value (HOLD) and peak value (PMAX, PMIN) storage
Relative value (REL) function for null balance and differential measurement
Automatic power-off after 20 minutes (can be deactivated)
Overload protection in all measuring ranges
Including high-quality protective case, 4-mm measuring lead set, batteries, protective rubber holster with magnet hanger and temperature sensor

"

SEE OFFER SEE OFFER ebay

TFA DOSTMANN TFA 60501504 - Alarm clock digital, projection 46.07 EUR "Projection alarm clock radio with USB charging function

Display with LED digits
3 brightness levels and automatic dimmer function with light sensor
Projection of the time onto a wall or ceiling with 2 brightness levels
Wake up to the song of a radio or alarm
2 alarm times
Snooze function with adjustable interval
Radio with 15 memories of FM stations
Volume control and sleep function
USB charging function for mobile devices

For many people, waking up to their favourite radio station is the best way to start the day in a good mood.
And this modern alarm clock radio with its unusual shape has even more to offer.
You can easily read the time at night without having to turn your head to the alarm clock, because the time is projected onto your bedroom wall or ceiling in digital luminous digits (adjustable in 2 brightness levels).
The time also appears very large and frameless on the curved display.
The display can be regulated in three brightness levels, automatically dimmed at night using a light sensor or be completely switched off.

You can use the integrated FM radio for your entertainment at any time.
You have the option to adjust the volume and tuning in to up to 15 favourite radio stations at the push of a button.
Let the day end comfortably with the sleep timer: after the time has elapsed, the radio automatically switches off and you will find it easier to sleep.
Two different alarm times can be set independently of each other. Of course you can also be woken up with an alarm tone.
And if you don't want to get up straight away, the snooze function gives you a few extra minutes in bed.
The duration of the alarm interruption can be set individually.
The USB charging function is particularly convenient.
So you can charge your smartphone overnight and have it at hand."

SEE OFFER SEE OFFER ebay

TFA DOSTMANN WS 5032 - Mould radar digital thermo-hygrometer 35.74 EUR 24-hour radar detects the danger of mould, innovative graphic shows humidity as on a radar screen.

• Display of temperature, maximum and minimum values, dew point, alarm functions

T: -10 - +60°C (+14 °F - 140 °F), H: 10 - 99%
Free-standing and hanging, 98 x 23 (50) x 98 (111) mm, 87 g
2 x 1.5 V AAA batteries included, EK-EL

SEE OFFER SEE OFFER ebay

TFA DOSTMANN TFA 38203905 - Digital Die Timer, 5 Min 25.4 EUR "

Easy-to-use die timer
4 preset countdown times: 1, 2, 3 and 5 min.
Set the desired time at the top to set the timer running
Display with the time turns with the countdown
Adjustable optical and acoustic countdown signal

Four countdown times (1, 2, 3, 5 minutes) are pre-programmed and printed on the top of the die. Simply turn the desired time to the top of the die and the timer will start running. The small display rotates and displays the countdown time. The red LED light pulsates. Once the selected time is reached, the LED light flashes and a beep sounds. To stop the alarm, rotate the timer to the neutral side.

The die timer offers many settings to suit the application and your personal preferences: The alarm sound can be loud or quiet, adjusted or turned fully off. The LED light can be switched off as well. If desired, a pre-alarm can sound 10 seconds before the countdown time elapses.

Note: 2x 1.5 V AAA batteries not included in the scope of delivery"

SEE OFFER SEE OFFER ebay

MEBUS 42435 - Digital quartz alarm clock, light sensor, temperature 20.23 EUR "Product features: Quartz alarm clock, digital

Extra-large LCD display
High-quality quartz movement
Temperature displayed in °C/°F
12/24-hour display
2 alarm times with snooze function
Time zone adjustment
Built-in light sensor
White backlight
Calendar (date, month)
Colour: black
Dimensions: 7.7 x 13.5 x 4.6 cm
Includes batteries

"

SEE OFFER SEE OFFER ebay

GOSSEN METRAWATT METRACLIP 61 - METRACLIP 61 - Digital leakage current clamp meter 618.54 EUR Leakage current clamp meter with DATA HOLD and maximum/minimum display

• Measurement of leakage currents and charging currents
• Digital and bar graph display
• 2 measurement ranges of 30/300 mA and 30/300 A
• Unaffected by external magnetic fields
• Jaw size 40 mm
• Compact, practical and easy

SEE OFFER SEE OFFER ebay

TFA DOSTMANN TFA 60255001 - Digital radio alarm clock, temperature 39.87 EUR "Digital radio alarm clock with temperature BINGO 2.0

Large, high-contrast display
Very easy to use
Two separate alarms with different alarm sounds
Rising or constantly loud alarm tone can be adjusted
Snooze Function
Display of indoor temperature, day of week and date
Automatic backlight with light sensor

At this alarm clock you will say bingo!
A radio alarm clock with extensive functions, but without superfluous gimicks.
The radio alarm clock BINGO 2.0, like the little brother BINGO, is intuitive and easy to use.

Display
The large, high-contrast display is even clearer and can be read well even in the dark.
If you press the large red button on the top of the alarm, it will be brightly lit for a short time.
If you want to recognize the time all night, you can also choose a discreet and economical night light, which automatically switches on and off via the integrated light sensor.

Alarm Function
Two alarm times with different alarm sounds can be activated independently of each other.
Simply push the respective slide switch on the side upwards.
A color marker clearly indicates whether the alarm clock is on.
Wake up gently with a rising alarm tone or immediately at full volume.
If you do not want to get up immediately, use the Snooze function.
IN addition, THE BINGO 2.0 informs about the day of the week and the date and also measures the room temperature."

SEE OFFER SEE OFFER ebay

KERN-SOHN KS FK 500 - Digital force gauge FK, 500 N 314.38 EUR "Robust Push/Pull force gauge for simple measurement

range (max.): 500 N
Readout: 0.2 N
internal measurement frequency: 1000 Hz
protection: 200%
Dimensions housing: 195 x 82 x 35 mm

Turnable display: automatic direction identification
Secure operability due to ergonomic design
Real time or Peak Hold Mode to observe transcients or capture peaks
Selectable measuring units: N, lb, kg, oz

"

SEE OFFER SEE OFFER ebay

JUMO JU 701052-230 - Digital thermostat, 230 V, Pt100, Pt1000, KTY 197.03 EUR The electronic thermostat for DIN rail mounting (35 mm) 90 mm x 22.5 mm in size is used for simple temperature control (heating or cooling). A Pt100zl, Pt1000zl or KTY2X-6 can be used as input. The actual and setpoint values are displayed on the backlit dot matrix display (64 x 80 pixels) with special characters for °C and °F. The timer function can be used to start the thermostat function (heating or cooling) or to limit the time. The switching status of the relay output and the actual and setpoint values are displayed simultaneously on the display. The display can be switched between four national languages (German, English, French and Spanish). The device is operated via four buttons on the front panel. Electrical connection via PCB terminal blocks with push-in technology. The power supply is 230 V AC, +10/-15%, 48 to 63 Hz.

SEE OFFER SEE OFFER ebay

ZHONGDI STATION ZD-939L - Digital Hot Air SMD Rework Station, 320W, ESD 77.19 EUR "Version L with 2nd switch and cool down function

SMD rework station for easy insertion and soldering of SMD components on the hot air method.

• Soldering / desoldering (hot air): 150 to 500 ° C.
• High air delivery, adjustable flow rate
• LCD display for set and actual temperature
• Precise temperature setting in 1 ° C increments
• actual temperature sensor in the soldering
• Anti-static design

The wide adjustment range for temperature and ""Air - Flow"" also supports automatic cooling for the work of SMD components.

Blue backlit screen that displays:
• Temperature setpoint
• Actual temperature
• heating

Specifications:
• Power supply: 230 V/50 Hz
• Power consumption: 320 W
• Air pump: Diaphragm Pump
• air-handling capacity: max. 22 liters / minute
• Löt-/Entlöt-Temperatur: 150 to 500 ° C.
• Display: 2-line LCD display

including 4 interchangeable hot air nozzles (the nozzle port diameter 21.5 mm)

Attention: Remove the transport lock before use."

SEE OFFER SEE OFFER ebay

DISPLAY VISIONS EA PLUGL128-6GTZ - USB graphic OLED, 128x64, 2.9 inch, yellow, touch, terminals, ID 187.42 EUR "USB graphic OLED in yellow with 128x64 pixels.
With capacitive touch panel and therefore ideal as operating unit. Various other interfaces such as RS-232, SPI and I²C bus. Digital and analog I/O's. Wide temperature range from -40 up to +80°C and fast display (typ. 10µs also at -40°C).
The display offers an extremely wide viewing angle of about 170°. Simple installation: glue horizontally or vertically into the front panel opening from the front. With 12 screw terminals and 20-pin pin header (IDC plug)

TECHNICAL DATA

WITH CAPACITIVE TOUCH
4 SERIAL INTERFACES USB, RS232, SPI, I²C
8 DIGITAL, FREE DEFINABLE I/Os INSTALLED
2 ANALOG INPUTS / 1 ANALOG OUTPUT
8 BUILT-IN FONTS
PIXEL-PRECISE POSITIONING FOR ALL FUNCTIONS
SCREENSAVER MODES
UP TO 256 IMAGES CAN BE STORED INTERNALLY
UP TO 256 MACROS PROGRAMMABLE
MIX TEXT AND GRAPHICS, BLINK ATTRIBUTES: ON/OFF/INVERSE
VARIABLE DISPLAY BRIGHTNESS (SOFTWARE)

"

SEE OFFER SEE OFFER ebay

DYMO M2 - Digital Postal Scale 58.54 EUR "Save time and money - Weigh any envelope or package for precise postage, every time.

Up to 2 kg capacity
Displays weight in 1 g increments
Powered by 3 AAA batteries (not included)

With DYMO Postal Scales you can weigh envelopes and packages up to 10 kg – without a trip to the Post Office or mailroom.
Compact size fits on any desk and stores in most desk drawers. Powered by three AAA batteries (not included) or USB cable when connected to a PC or Mac (M5 and M10 only)."

SEE OFFER SEE OFFER ebay

DISPLAY VISIONS EA PLUGL128-6GTC - USB graphic OLED, 128x64, 2.9 inch, yellow, incl. touch panel 167.47 EUR "USB graphic OLED in yellow with 128x64 pixels.
With capacitive touch panel and therefore ideal as operating unit. Various other interfaces such as RS-232, SPI and I²C bus. Digital and analog I/O's. Wide temperature range from -40 up to +80°C and fast display (typ. 10µs also at -40°C).
The display offers an extremely wide viewing angle of about 170°. Simple installation: glue horizontally or vertically into the front panel opening from the front.

TECHNICAL DATA

WITH CAPACITIVE TOUCH
4 SERIAL INTERFACES USB, RS232, SPI, I²C
8 DIGITAL, FREE DEFINABLE I/Os INSTALLED
2 ANALOG INPUTS / 1 ANALOG OUTPUT
8 BUILT-IN FONTS
PIXEL-PRECISE POSITIONING FOR ALL FUNCTIONS
SCREENSAVER MODES
UP TO 256 IMAGES CAN BE STORED INTERNALLY
UP TO 256 MACROS PROGRAMMABLE
MIX TEXT AND GRAPHICS, BLINK ATTRIBUTES: ON/OFF/INVERSE
VARIABLE DISPLAY BRIGHTNESS (SOFTWARE)

"

SEE OFFER SEE OFFER ebay

METRIX CHAU DOX2070B - Digital storage oscilloscope, 70 MHz, 2 CH, USB, LAN 929.32 EUR "The METRIX DOX 2000B series oscilloscopes are easy to use, compact and their space-saving, shallow depth housing is ideally suited for laboratory applications.

The instruments feature a large screen with 16 horizontal divisions in full screen display. Image display can be customized: normal or afterglow mode, YT or XY display, adjustment of colors, screen grid, brightness, contrast, etc. All knobs and illuminated keys for operation are located on the front panel.

Its handle makes the DOX 2070B oscilloscope easy to carry, and the anti-slip feet provide stability.

Excellent leads and many acquisition and analysis functions:

Signal acquisition as well as signal analysis is performed at three levels: real-time or time equivalent mode (ETM). The memory depth is 32 kPoints and a USB stick can be used to increase the memory capacity to extend analyses. Vertical sensitivity is divided into 12 ranges from 2 mV/div to 10 V/div, and the time base ranges from 5 ns/div to 50 s/div. Advanced functions are available, such as simple MATH functions +/-/x/÷ and a real-time FFT function with simultaneous display of signal waveforms.
The PASS/FAIL function with respect to a given envelope is also practical.

With the accompanying software EASYSCOPE one can operate the instrument, perform tests, initiate screen copies and download signal files.

Technical data:

2 channels, 70 MHz - time base from 2.5 ns/div to 50 s/div + adjustable digital filters
Sampling: Singleshot: 500 MS/s (2 channels)/ 1 Gs/s (1 channel) / Repeat mode: 50 GS/s
LCD color screen, 7 inch WVGA, resolution 800x480
Operator menus in 5 languages + on-screen context help in FR/EN
Measurement acquisition in 2 channels + 1 external trigger channel and complex trigger functions
Vertical resolution: 8 bit
32 automatic measurements
Measurement cursors: manual, tracking and automatic
Networking as USB device and via ETHERNET RJ45 for connection to a PC
IEC 61010-1 / 300 V CAT II

"

SEE OFFER SEE OFFER ebay

2N 91378501WH - Indoor unit for video door phone 475.02 EUR "2N® Indoor Compact - Digital Intercom Answering Panel, PoE, white

The 91378501 Indoor Compact Touchscreen Digital Intercom is the latest compact version of 2N's highly popular Indoor Touch.
Featuring a 4.3 inch display screen and with a reduced feature set, the 2N Indoor Compact makes for an economical installation model.

The 91378501 is ideal for use as part of an IP connected intercom or door entry system, particularly in residential applications such as apartments or MDU's, the 2N Indoor Compact easily connects to the network for communication with 2N's full range of IP Intercom devices such as the Verso, Force and IP Base.

4.3 inches display for video communication with visitors
Capacitive buttons located next to the display
Unique flush mount box used for the installation of 2N answering units
Remote management and configuration via the My2N portal
Home screen displays the time and date
Missed calls logs supplemented by a sequence of images from the IP intercom
Switching between video from IP intercom and an external IP camera
Parental lock activated and deactivated using a code
Induction loop output for the hearing impaired

The Indoor Compact is controlled using clear, icon-based touch buttons to answer and end calls from a door intercom on the network alongside a series of navigation buttons to the left and right of screen.

The device features scratch-resistant, toughened glass and is flush mountable using the same universal back box as the 2N Indoor Talk and the same back box to be used in all future intercom answering devices.

The 2N Indoor Compact features an input for door bell connection and output for integration of an induction loop system to assist users with a hearing aid.
The Indoor Compact can be powered via PoE or 12v DC power supply."

SEE OFFER SEE OFFER ebay

STARTECH.COM ST DVI2VGAE - Active adapter DVI-D male > VGA female, USB micro-B. 47.11 EUR Connect a DVI-D-enabled laptop or desktop computer to your VGA display or projector.
With the active DVI-D to VGA adapter DVI2VGAE, you can connect a digital DVI output from a desktop computer or laptop to a VGA monitor or VGA projector, saving on the cost of upgrading to a DVI-D compatible display.
The DVI-D to VGA converter provides an easy way to output user-generated content such as presentations and work documents, and, by extending the computer's desktop to a secondary monitor, increases productivity and thus doubles the available workplace.
This mobile adapter is used to convert a standard operated DVI bus to VGA without external power supply. For low-power DVI ports, a USB cable is included that can be used to operate the device via a USB power supply.

Connector
Connector a:
1 - DVI-D (25-pin) connector input
1 - USB Micro-B (5-pin) socket
Connector B: 1 - VGA (15-pin, High density D-Sub) socket Output
Connector type(s): USB Micro-B (5-pin) socket

SEE OFFER SEE OFFER ebay

2N 9157101 - Video door phone with access control 3420.82 EUR "2N® IP Style - Digital Touchscreen Door Intercom with Bluetooth and RFID

The 2N IP Style combines the best of IP intercoms and IP cameras.
The 9157101 IP door intercom features a stylish design and 10'' display that perfectly complements the entrances to premium projects.
Featuring a stylish and intuitive user interface including digital phonebook, the 2N IP style is ideal for apartment buildings, MDUs, co-working office spaces and gated communities.
The latest generation door intercom features multiple access authentication methods including digital keypad, RFID and 2N's brand new WaveKey Bluetooth contactless verification for ultra fast, ultra secure access via smartphone.
The IP Style runs on the latest generation Axis Artpec processor.
This is one of the reasons why the door station camera can compete with most outdoor IP cameras from leading manufacturers.

10.1"" Colour Touch Screen with high brightness
IP65 and IK08 rated for indoor and outdoor installation
Bluetooth 5.0 LE compliant
Camera features latest-generation Axis Artpect technology for wide dynamic range, high performance image quality in low light and night time
Multiple access / authentication methods: Digital Keypad & phonebook, WaveKey Bluetooth and RFID
User interface offers options for office and residential applications
Supports SIP to provide reliable two way voice & one way video communication
Complies with ONVIF standard for easy integration with any network surveillance system
Flush or Surface mountable (back boxes sold seperately)
Finish - Black stainless steel
Supports Carson Living Remote Concierge service

Camera of the future
Enhance your projects with an intercom that can:

Handle multiple simultaneous full HD streams
Has a 5 MPx chip
Supports Wide Dynamic Range
Uses high quality colour image even in low light conditions

Fastest mobile Access Control
The IP Style supports the latest 2N WaveKey technology for high speed, secure mobile access credentials.

Premium Display
The IP Style display is extremely bright which guarantees excellent visibility, even in direct sunlight.

IP65 and IK08 Certified Durability
The 2N IP Style is IP65 and IK08 certified meaning it can resist heavy rain, a dusty environment, and attacks by vandals - ideal for indoor, outdoor and public access locations.

Easy to install
2N IP style has a patented tilt-out system, so both hands are free to work with the cables.

Customise UI for your project
You can select from 2 different options of displaying the intercom's user interface. You'll satisfy the specifics of apartment or office buildings and tweak the user experience to perfection.

SEE OFFER SEE OFFER ebay

METRIX CHAU DOX2025B - Digital storage oscilloscope, 25 MHz, 2 CH, USB, LAN 754.1 EUR "The METRIX DOX 2000B series oscilloscopes are very easy to use and are housed in a space-saving, shallow-depth enclosure designed especially for laboratory workstations.

The large screen includes 16 divisions in the X-axis in full screen display and is individually configurable: normal or luminescent display, YT or XY display, adjustment of colors, screen grid, brightness, contrast, etc. Rotary knobs and illuminated direct function keys on the front panel facilitate operation.

The handle makes the oscilloscope easy to transport and the non-slip feet ensure stable placement on the workbench.

High performance and a wide range of acquisition and analysis functions:

Signal acquisition and analysis is performed at 3 levels, in real time or time equivalent. The acquisition memory has a depth of 32K points and additional memory can be added via a USB pen for optimal analysis. Sensitivity ranges vertically in 12 measurement ranges from 2 mV/div to 10 V/div and horizontally from 5 ns/div to 50 s/div. Advanced functions are available: simple MATH functions + / - / x / ÷ and an FFT function ""in real time"" with simultaneous display of the curves.
Practical PASS/FAIL function: OK/NOK test based on a limiting envelope.

The supplied EASYSCOPE software allows the operation of the instrument, tests and the transfer of curve files and screen copies.

Technical data:

7 inch LCD color screen 7, WGA resolution 800x480
Operator dialog selectable in 5 languages + context help in FR/EN
Data acquisition: 2 channels + Ext Trig and complex trigger functions
Vertical resolution: 8 bit (0.4 %)
32 automatic measurements
Cursor for manual measurements, manual, automatic and tracking mode
Data transfer via USB and ETHERNET and RJ45 for data transfer to PC
IEC 61010-1 / 300 V CAT II
2 channels with 25 MHz + 1 channel for external trigger
Time base 25 ns/div to 50 s/div
sampling rate: single shot = 250 MS/s (2 channels), 500 MS/s (1 channel) / repetition = 10 GS/s
max. memory depth: 32K points

"

SEE OFFER SEE OFFER ebay

VELLEMAN VE EMDIN03 - Energy meter, triple-phase, LCD display 98.79 EUR This triple-phase energy meter for rail mounting is part of a new generation of triple-phase electronic power meters. The device uses micro-electronic technology, LSI circuits and advanced digital and surface-mounting technologies. The device meets the technical requirements of Class 1, Class 2, IEC62052-11 and IEC62053-21.

Characteristics

• LCD display (with blue backlight)
• Pulse output
• LED display

Technical data
Power supply: 230 V
Power: 10 (100) A
Accuracy class: 1.0
Frequency: 50 / 60 Hz
Display mode: LCD 5+2 digits = 99999.99 kWh
Power consumption: <=2 W (10 VA)
Temperature range: -20°C to 65°C
LED: 1 flashing/pulsating
Pulse output: 800 imp/kWh
Voltage: 12 to 27 V
Power: 27 mA
Pulse value: 90 ms

SEE OFFER SEE OFFER ebay

PEAKTECH 1270 - 300 MHz, 2-channel digital storage oscilloscope 1490.7 EUR "This latest-generation digital storage oscilloscope has a high-resolution colour display, a high bandwidth of 300 MHz and a high sampling rate, VGA output, large internal data storage, USB connection and LAN interface for integration into networks. Impressive value for money and modern technology allows a wide range of applications in education, service and quality assurance fields.

• 300 MHz bandwidth
• Sampling rate of 2.5 GSa/s
• Save measured values and graphics directly onto USB stick
• Internal memory of 10 million points per channel or 15 waveforms
• 20 automatic measurement modes and FFT function
• High-resolution TFT colour display with 800 x 600 pixels and 65,536 colours
• PASS/FAIL function
• LAN connection for remote access via network
• Autoset and autoscale functions for user-friendly operation
• USB connection for real-time data transfer or for reading the internal memory
• VGA output for connecting an external monitor
• Accessories: 2 BNC cables, USB cable, software CD for Windows systems, mains cable, 2 probes, case, user manual

Bandwidth: 300 MHz
Display: 20 cm (8"") TFT with 65,536 colours
Measuring mode: normal/peak value detection/average value
Sampling rate per channel: 1.25 GSa/s
Sampling rate (single channel mode): 2.5 GSa/s
Input coupling: AC, DC, GND
Input impedance: 1´ MW +/- 2% in parallel with 10 pF +/- 5 pF
Max. input voltage: 400 V (DC + AC PK-PK)
Vertical sensitivity: 2 mV - 10 V/division
Rise time: < 1.17 ns
DC accuracy: +/- 3%
Vertical resolution: 8 bits (2 channels simultaneously)
Horizontal scale: 1 ns - 100 s/scale factor/DIV
Measurement range 0.5 Sa/s ~ 2.5 GSa/s
Trigger type: alternate/edge/video/pulse/slope
Trigger mode: single, normal, auto
Trigger coupling: AC, DC, RF, LF
20 automatic measurements: Vpp, Vrms, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, freq., period, rise time, fall time, delay A- >B (rising), delay (A- >B (falling), +width, -width, +duty, -duty
Phase difference: +/- 3°
Mathematical measurement functions: +, -, *, /
Storage length: 10,000,000 points/channel
Interfaces: USB device 2.0, USB host 2.0, pass/fail, VGA, LAN
Operating voltage: 100 ~ 240 V AC RMS, 50/60 Hz
Dimensions (W x H x D): 340 x 155 x 70 mm
Weight: 1.85 kg"

SEE OFFER SEE OFFER ebay

VELLEMAN VE EMDIN02 - Energy meter, single-phase, LCD display 45.09 EUR This single-phase energy meter for rail mounting is part of a new generation of single-phase electronic power meters. The device uses micro-electronic technology, LSI circuits and advanced digital and surface-mounting technologies. The device meets the technical requirements of Class 1, Class 2, IEC62052-11 and IEC62053-21. It provides precise and direct measurements of the energy consumption (50/60 Hz) of single-phase AC mains supplies.

Characteristics

• LCD display (with blue backlight)
• Pulse output
• LED display

Power supply: 230 V
Power: 5 (80) A
Accuracy class: 1.0
Frequency: 50 / 60 Hz
Display mode: LCD 5+1 digits = 99999.9 kWh
Power consumption: <=0.4 W (8 VA)
Temperature range: -20°C to 65°C
LED: 1 flashing/pulsating
Pulse output: 1000 imp/kWh
Voltage: 12 to 27 V
Power: 27 mA
Pulse value: 90 ms

Values are retained in the event of power failure

SEE OFFER SEE OFFER ebay

VELLEMAN VE EMDIN01 - Energy meter, single-phase, LCD display 46.44 EUR This single-phase energy meter for rail mounting is part of a new generation of single-phase electronic power meters. The device uses micro-electronic technology, LSI circuits and advanced digital and surface-mounting technologies. The device meets the technical requirements of Class 1, Class 2, IEC62052-11 and IEC62053-21. It provides precise and direct measurements of the energy consumption (50/60 Hz) of single-phase AC mains supplies.

Characteristics

• LCD display (with blue backlight)
• Pulse output
• LED display

Technical data
Power supply: 230 V
Power: 5 (40) A
Accuracy class: 1.0
Frequency: 50 / 60 Hz
Display mode: LCD 5+2 digits = 99999.99 kWh
Power consumption: <=0.4 W (8 VA)
Temperature range: -20°C to 65°C
LED: 1 flashing/pulsating
Pulse output: 1000 imp/kWh
Voltage: 12 to 27 V
Power: 27 mA
Pulse value: 90 ms

Values are retained in the event of power failure

SEE OFFER SEE OFFER ebay

SEEED GRV 4NUM DISPLAY - Arduino - Display Grove 4 digits, TM1637 17.75 EUR Description
4 digit display module is usually a 12 pin module. In this Grove gadget, we utilize a TM1637 to scale down the controlling pins into 2 Grove pins. It only takes 2 digital pins of Arduino or Seeeduino to control the content, even the luminance of this display. For projects that require of alpha-numeric display, this can be a nice choice.

Features
• 4 digit red alpha-numeric display
• Grove compatible
• 8 adjustable luminance levels
• Application Ideas
• Time display
• Stopwatch
• Sensors input display

For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.

SEE OFFER SEE OFFER ebay

CHAUVIN ARNOUX CHAU P01196775 - Multimeter C.A 5275, digital, 6000 counts, TRMS, AC/DC, IP54 429.55 EUR "The C.A 5275 multimeter has a double illuminated display with 6,000 dots and a bar graph with 61 + 2 segments and afterglow effect.

It is suitable for 600 V CAT IV installations and the protection class is IP54. The wide measuring ranges allow measurements up to 1000 V, 10 A, 60 MOhm and 60 mF with respective resolutions of 10 µV, 1 µA, 100 mOhm and 1 pF.

Technical features:

True RMS (TRMS) measurement for AC and DC voltages and currents
12-bit converter
5 measurements/second
CAT IV 600 V / CAT III 1000 V
IP54 protected
double backlit display with 6.000 dots + bargraph with 61+2 segments
automatic or manual selection of measuring ranges
V-position with low impedanceLowZ with low pass filter
measuring range 1000 V/10 A
resolution: 10 µV
currents from µA range
Measurement of ionization currents
Measurement of min/max
Resistance measurement
acoustic continuity test
capacitance measurement

"

SEE OFFER SEE OFFER ebay

CHAUVIN ARNOUX CHAU P01196733 - Multimeter C.A 5233, digital, 6000 counts, TRMS, AC/DC, NCV 270.21 EUR "This compact digital multimeter has all the functions needed by electricians to maintain low or medium power residential and commercial appliances and installations.

Ergonomic and easy to use, it features an illuminated 6,000-dot display with bar graph for easy readability, 2 OFF positions for faster work, and a compact case with a non-slip, shock-protective cover that fits snugly in your hand.

Technical features:

CAT IV 600 V
measurement of true RMS value (TRMS)
large illuminated display with 6,000 dots (digit height 8 mm)
bargraph with 61 segments
two OFF positions
non-contact voltage detection (NCV)
measurement of voltages at low impedance (VLow Z) to avoid interference voltages.
MIN, MAX, REL function
measurements up to 600 V
measurement of AC or DC currents up to 10 A
Measurement of frequencies
Measurement of temperatures
Measurement of capacities
measuring range: 60 mV
compact instrument case according to IP54 with shock protection cover
can be used with multifunction mounting accessories (sold separately)

"

SEE OFFER SEE OFFER ebay

CHAUVIN ARNOUX CHAU P01196773 - Multimeter C.A 5273, digital, 6000 counts, TRMS 372.02 EUR "The C.A 5273 multimeter is a advanced device for electrical maintenance of systems and small AC and DC machines.

It has a double illuminated display with 6,000 points and a bar graph with 61 + 2 segments and afterglow effect. It is suitable for installations with 600 V CAT IV and the degree of protection is IP54. The multimeter was developed and manufactured by CHAUVIN ARNOUX in France.

Specifications:

CAT IV 600 V / CAT III 1000 V
True RMS Measurement
Large illuminated 6,000 point display with 61 + 2 segment bargraphs with two modes (full scale / central zero)
Auto AC/DC Detection
Automatic or manual selection of the measuring ranges
V low impedance position, LowZ with low pass filter
Voltage measurement up to 1000 V AC/DC
Current measurement up to 10 A AC/DC
Resistance / Acoustic continuity check
Temperature measurement
Capacitance measurement
Storage Max / Min

"

SEE OFFER SEE OFFER ebay

MURATA POWER SOLUTIONS DMS01VM1RS12C - LCD panel meter, voltmeter, red, -2 … +2 V DC 119.08 EUR "Large format digital DC voltmeter with red LED display.

Product series: DMS01-VM1
Measuring range: -2 VDC to 2 VDC
Display type: LED
Colour: Red
Number of digits: 4,5
Digit height: 25 mm
Power supply: 12 VDC
DC power supply current: Max 100 mA
Operating temperature: 0 °C to 50 °C
Humidity: 0% to 85%
Mounting type: Panel mount
Accuracy: 0.002%
Case material: Polycarbonate
Configurable DPM: Yes
Daylight Readable: No
Update rate: 2,5 samples/s

"

SEE OFFER SEE OFFER ebay

NITECORE NC LG-UNK2 - Charger for Nikon camera batteries 45.4 EUR "The Nitecore UNK2 is a compact digital USB charger for Nikon camera batteries. The USN2 can be charged via a USB port, so it's perfect for using on the go.

The UNK2 has two charging bays - one on the front, one on the back.
The LCD display provides all the information you need about the charging process, including the battery voltage, charging current, temperature, charging step and battery status.
The UNK2 automatically selects the appropriate charging process.

Suitable for batteries from the following Nikon cameras: Nikon D500, Nikon D600, Nikon D610, Nikon D750, Nikon D800, Nikon D800E, Nikon D810, Nikon D810A, Nikon D850, Nikon D7000, Nikon D7100, Nikon D7200, Nikon D7500, Nikon 1V1, Nikon V1

Design for the following battery types: EN-EL15

Technical data:
Rechargeable batteries: Lithium batteries
Power supply: USB 5 V DC
Model: desktop charger
Colour: black
Dimensions: 85 x 50 x 25.5 mm
Weight: 66 g"

SEE OFFER SEE OFFER ebay

NITECORE NC LGUSN4PRO - Charger for Sony camera batteries, 2 bays 45.4 EUR The Nitecore USN4 PRO is a compact digital USB charger for Sony camera batteries. The USN4 PRO charger can be charged via a USB port, so it is perfect for using on the go. The USN4 PRO has two charging bays and can charge Sony NP-FZ100 camera batteries. The LCD display provides all the information you need about the charging process, including the battery voltage, charging current, temperature, charging progress and battery status. In Quick Charge mode, the USN4 PRO can charge with a maximum of 1.2 A in one charging bay and 2 x 0.8 A in two charging bays. The standard charging current is 1 A. The USN4 PRO automatically selects the appropriate charging method.

Can be used with NP-FZ100 batteries of the following Sony cameras: a7 III, a7R III, a9 (ILCE-9)

Designed for the following battery types: NP-FZ100

Technical data:
Chargeable systems: li-ion
Charging current: max. 1200 mA
Power supply: USB 5 V DC
Model: desktop charger
Colour: black
Dimensions: 125 x 70 x 29 mm
Weight: 95 g

SEE OFFER SEE OFFER ebay

STARTECH.COM ST DVIDDMF2M - Cable extension DVI-D Dual Link 2 m 24.11 EUR "

supports a maximum resolution of 2560x1600
high-speed digital transmission rate of up to 9.9 Gbits/sec
Ferrite core eliminates EMI interference
Aluminum-Mylar Foil with Braided Shielding
supports hot-plugging of DVI display devices

Extend the connection distance between your DVI-D digital devices by 2 meters
The DVIDDMF2M 2m DVI-D Dual Link Extension Cable allows you to extend the connection between your desktop workstation and DVI monitor, or your laptop and projector by up to 2-meters.

The dual link cable supports resolutions of up to 2560x1600 and transmission rates of up to 9.9 Gbits/sec, and is fully compliant with DVI DDWG standards.

This durable DVI male to female cable is designed to provide a high quality digital video experience."

SEE OFFER SEE OFFER ebay

PURELINK PURE PT-C-HDADE - Audio Extractor HDMI 4K 60 Hz 132.85 EUR "The PT-C-HDADE is an HDMI 2.0a audio extractor with a variety of audio outputs that support the full HDMI bandwidth and are therefore ideal for home theater and high-end professional installations. Full 18Gbps video support and digital and analogue audio extraction. The PT-C-HDADE can read in the EDID of the display to enable the extraction of DTS and direct transmission to an AV receiver, for example, for devices that do not support Dolby Digital Audio. This smart feature ensures compatibility with any 4K TV or monitor.

CINEMA SOUND EXTRACTION

Extracts PCM, Dolby Digital, DTS and DTS-HD, regardless of the audio format supported by the display. Audio is output via balanced Phoenix, Stereo RCA or Digital Coax, ideal for professional home cinema.

CEC AND EDID MANAGEMENT

Designed for trouble-free operation and ease of use. CEC pass-through through through simplified control and EDID management including fixed EDID storage for AVR compatibility ensure perfect communication between devices.

FULL 18GBPS AND HDR

Compatible with the latest Ultra High Definition sources and displays. Signal display with resolutions up to 4K@60 4:4:4 (18 Gbit/s) for best, crystal clear playback of HDR media.

ULTRA SLIM DESIGN

The entire technology is integrated into the ultra-slim housing, ideal for installation in furniture or just behind the TV.

"

SEE OFFER SEE OFFER ebay

BENNING CFLEX 2 - CFlex 2 with TrueRMS digital display

Comparison of Similar Products