Review Bausch diamond milling cutter cylindrical

PROXXON 28710 - Precision milling cutter, Wolfram vanadium steel, 5 pieces 17.17 EUR Wolfram vanadium steel milling bits, for machining soft and hard wood, non-ferrous precious metals, as well as plastics and plaster.

SEE OFFER SEE OFFER ebay

PROXXON 24620 - Four-piece milling cutter set, shafts 6 mm or 10 mm 57.49 EUR Four-piece milling cutter set (6 - 10 mm)

Cutters of 6 mm, 7 mm, 8 mm and 10 mm. Four-flute design according to DIN 844. Shafts 6.0 or 10 mm. Made from HSS-Co5. Comes in a wooden box with sliding lid.

SEE OFFER SEE OFFER ebay

PROXXON 28720 - Precision milling cutter set, Wolfram vanadium steel, 3 pieces 19.24 EUR Selected Wolfram vanadium steel.
Functional and robust design.
Shank and milling part manufactured from a one-piece blank.
Precise indentation and optimum concentricity
with simultaneous elasticity. For
machining soft and hard wood, non-ferrous and
precious metals, as well as plastic and plaster.
Set consisting of:
1 x ball shape 5mm
1 x wheel shape 5mm
1 x cone shape 5mm

SEE OFFER SEE OFFER ebay

Bausch Professional power manicure and pedicure machine 141.12 EUR Mains operation. Power supply 220-240 volts, 120 wattsSpeed infinitely variable, up to 13500 rpm2 grinding stones4 diamond burs1 polishing felt3 grinding caps with carrierforward and reverse, ideal also for left-handersSpiral cable 2.5 m for large free spaceExcellent also for artificial nailsDelivery with clamping aid for the chuckDevice warranty 2 years

SEE OFFER SEE OFFER ebay

Bausch Diamond cutter flame 12.16 EUR Attachment for all Bausch manicure and pedicure sets. For the treatment of ingrown nails. Eliminates the small unsightly cuticles on the sides of the nails.

SEE OFFER SEE OFFER ebay

Bausch Diamond cutter cone hollow 20.3 EUR Attachment for all Bausch manicure and pedicure sets. For removing harder calluses.

SEE OFFER SEE OFFER ebay

KAISER 1090-22 - Setting tool, milling cutter, Styro55 14.91 EUR Setting tool, milling cutter for insulation boards for quick and secure fastening of the ECON® Iso + appliance junction box (art. no.
1159-55) and ECON® Styro55 (art. no. 1555-51).

The subsequent installation of electrical connections on an already completed, insulated façade is a challenge. With the SPECIAL cutters, installation openings can be created without weakening the thermal insulation system, as insulation is only removed at certain points.

SEE OFFER SEE OFFER ebay

PROXXON 27110 - MICRO milling machine Micromot MF 70. 100 W 339.72 EUR The precise vertical milling machine for the finest work. Spindle speeds 5000 - 20,000 rpm. For working with extremely small cutters.

Stable machine base made of cast iron, vertical guide and cross table. With play-free, readjustable dovetail guide in all axes. Diecast aluminium boom housing, with 24-pole special motor (balanced). For vibration-free working at high speeds.

Tools held by MICROMOT system collets (steel, hardened, three slot), with one each of 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm. Table with three continuous T-slots (MICROMOT standard 12 x 6 x 5 mm). A sliding ruler facilitates the positioning of the cross carriage.

Technical data:
230 V. 100 W. 50/60 Hz. 5000 - 20,000 rpm. Table 200 x 70 mm. Travel: X (transverse) 134 mm, Y (longitudinal) 46 mm, Z (vertical) 80 mm. Machine base (installation area) 130 x 225 mm. Overall height 370 mm. Weight: approx. 7 kg. The clamping claws shown are included in the scope of delivery, but not the workpiece!

SEE OFFER SEE OFFER ebay

PROXXON 24350 - Milling machine FF 500/BL 2448.78 EUR With stepless speed preselection for 200 - 4000 rpm with high precision (accuracy 0.05 mm). With digital speed display.

Sophisticated control via rotor-position and speed sensors guarantees high torque when using large cutters, even in the lower speed range. Solid column with dovetail guide. Cutting head can be swivelled 90° to the right and left (indicated on a scale). The sleeve can be clamped and is prepared for the attachment of the fine feed adapter NO 24 254. Tool chuck with multi-range collet chucks type ER 20: One piece each 6 - 8 - 10 and 12 mm are included. Height adjustment of the cutting head by means of a hand wheel. Solid, face-milled cross table made of steel with three continuous T-slots according to MICROMOT standard (12 x 6 x 5 mm). All three handwheels with scale ring (1 turn = 2 mm).

Technical data:
230 V. 400 W. 50/60 Hz. Spindle speeds 200 - 4000 rpm. Throat 125 mm. Stroke: 30 mm. Column 120 x 100 x 430 mm. Table: 400 x 125 mm. Travel: vertical (Z axis) 220 mm, transverse (X axis) 310 mm, depth (Y axis) 100 mm. Dimensions: H = 750 mm, W = 550 mm, D = 550 mm. Weight: approx. 47 kg.

Note:
Clamping claws, cutters and workpiece are not included in the scope of delivery.

New technology with brushless direct drive: quiet and vibration-free. Made in Germany.

SEE OFFER SEE OFFER ebay

KS TOOLS GMBH KS 136.1105 - Tap milling set 1/4 inch - 1 inch, 6 pieces 40.95 EUR "Product description

For precise remilling of valve seats on leaking taps
Adjustable milling pressure via spring and regulating screw
Suitable for all common fittings thanks to a cylindrical stepped threaded socket
Milling tool can be replaced
Supplied with sturdy plastic case

"

SEE OFFER SEE OFFER ebay

Bausch Grinding stone, cylindrical 10.22 EUR Attachment for all Bausch manicure and pedicure sets. For grinding and shortening toenails. Also suitable for artificial nails.

SEE OFFER SEE OFFER ebay

KS TOOLS GMBH "KS 116.2037 - 1/2"" valve extension cutter, 1/4"" hexagonal mount" 59.55 EUR "1/2"" valve extension cutter, 1/4"" hexagonal mount

Description

With 1/4"" hexagonal mount
With swarf catcher
For wall-mounted milling of valve extensions
Equipped with a special carbide insert
Optimal centring by cylindrical attachment in front of the cutter
Special tool steel

Features

Holder: 1/4"" hexagonal mount
Package content: 1
Diameter: 36
Total length: 91.5 mm
Weight [g]: 170
Material 1: special tool steel
Packaging height: 40 mm
Packaging width: 45 mm
Packaging length: 82 mm

"

SEE OFFER SEE OFFER ebay

PROXXON 24610 - Shaft cutter set, 4-piece, Ø 6 mm shaft 49.22 EUR Shaft cutter set (2 - 5 mm), 4-piece

All cutters with 6 mm cylindrical shaft: 1 each for 2 - 3 - 4 and 5 mm. Double-edged, according to DIN 327. Made of HSS-Co5. In wooden box with sliding lid.

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000884 - Carbide cutter, 4 flutes, dia. 5 mm, TiAlSiN shank HA RF 62.65 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: TiAlSiN
Cutting material: HP40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 5 mm
Shank dia. DCON: 6 mm
Maximum cutting depth APMX: 13 mm
Total length LF: 57 mm
Chamfer width CHW: 0.1 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000883 - Carbide cutter, 4 flutes, dia. 4 mm, TiAlSiN shank HA RF 62.65 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: TiAlSiN
Cutting material: HP40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 4 mm
Shank dia. DCON: 6 mm
Maximum cutting depth APMX: 9 mm
Total length LF: 57 mm
Chamfer width CHW: 0.1 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000882 - Carbide cutter, 4 flutes, dia. 3 mm, TiAlSiN shank HA RF 62.65 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: TiAlSiN
Cutting material: HP40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 3 mm
Shank dia. DCON: 6 mm
Maximum cutting depth APMX: 6 mm
Total length LF: 57 mm
Chamfer width CHW: 0.1 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

Bausch Diamond grinding wheel Unit 17.21 EUR To remove the cornea.

SEE OFFER SEE OFFER ebay

HAZET HZ 1967 - Weld point cutter 36.2 EUR

Application:
Exact milling of welding points in sheet metal processing

Suitable for every drilling machine
Hexagon shank (7 mm)
No twisting in drill chuck
Replaceable milling head (right-hand thread) made of quick steel (oiled)
Crown to be used on both sides
Cut depth adjustment (*) by adjusting screw
MADE IN GERMANY
Dimensions / Length: 70 mm
Diameter: 11 mm
Net weight (kg): 0.02 kg
No warping or tearing of the sheet during spot welding

SEE OFFER SEE OFFER ebay

PROXXON 20000 - Bracket for power drills, drill stands 229.07 EUR "For standard drilling machines with 43 mm spindle neck.

Boom head can be swivelled up to 90°. This makes for a versatile range of applications: angle drilling, versatile milling without special cutters, milling of oblique slotted holes. Can be changed to fine feed for making adjustments when head trimming. With depth stop and depth scale. Large gear reduction on rack feed allows drilling without much effort. 45 mm thick drilling column, 500 mm long. Approx. 140 mm radius (column outside to centre of tool). 65 mm stroke. Face-milled, solid base plate with 200 x 200 mm usable table surface and two continuous T-grooves according to MICROMOT standard (12 x 6 x 5 mm). Easy clamping of all commercially available drilling machines with 43 mm spindle neck. Weight: approx. 6.5 kg.

Adjustable, milled dovetail guide.
Clearly readable depth scale.
Drilling column dia. 45 mm, 500 mm long.
Adjustable 0-position for fine feed.
Can be changed to fine feed with spindle.
Stable, face-milled work table with 2 T-grooves according to MICROMOT standard (12 x 6 x 5 mm).

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000890 - Carbide end mill, 4 flutes, dia. 20 mm, AlTiN/TiSiXN shank HA RF 494.7 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: AlTiN/TiSiXN
Cutting material: TI40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 20 mm
Shank dia. DCON: 20 mm
Maximum cutting depth APMX: 38 mm
Total length LF: 104 mm
Length, usable LU: 52 mm
Neck dia. DN: 19.6 mm
Chamfer width CHW: 0.3 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000886 - Carbide end mill, 4 flutes, dia. 8 mm, AlTiN/TiSiXN shank HA RF 85.39 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: AlTiN/TiSiXN
Cutting material: TI40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 8 mm
Shank dia. DCON: 8 mm
Maximum cutting depth APMX: 19 mm
Total length LF: 63 mm
Length, usable LU: 25 mm
Neck dia. DN: 7.7 mm
Chamfer width CHW: 0.2 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000885 - Carbide end mill, 4 flutes, dia. 6 mm, AlTiN/TiSiXN shank HA RF 62.65 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: AlTiN/TiSiXN
Cutting material: TI40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 6 mm
Shank dia. DCON: 6 mm
Maximum cutting depth APMX: 13 mm
Total length LF: 57 mm
Length, usable LU: 20 mm
Neck dia. DN: 5.7 mm
Chamfer width CHW: 0.15 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000887 - Carbide end mill, 4 flutes, dia. 10 mm, AlTiN/TiSiXN shank HA RF 114.33 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: AlTiN/TiSiXN
Cutting material: TI40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 10 mm
Shank dia. DCON: 10 mm
Maximum cutting depth APMX: 22 mm
Total length LF: 72 mm
Length, usable LU: 30 mm
Neck dia. DN: 9.7 mm
Chamfer width CHW: 0.2 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000888 - Carbide end mill, 4 flutes, dia. 12 mm, AlTiN/TiSiXN shank HA RF 179.45 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: AlTiN/TiSiXN
Cutting material: TI40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 12 mm
Shank dia. DCON: 12 mm
Maximum cutting depth APMX: 26 mm
Total length LF: 83 mm
Length, usable LU: 36 mm
Neck dia. DN: 11.6 mm
Chamfer width CHW: 0.25 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000891 - Carbide end mill, 4 flutes, dia. 25 mm, AlTiN/TiSiXN shank HA RF 734.5 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: AlTiN/TiSiXN
Cutting material: TI40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 25 mm
Shank dia. DCON: 25 mm
Maximum cutting depth APMX: 45 mm
Total length LF: 125 mm
Length, usable LU: 65 mm
Neck dia. DN: 24.5 mm
Chamfer width CHW: 0.3 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000418 - Carbide end mill, 3 flutes, 2xDC chamfer 0.35 mm 45°, dia. 20 mm 409.95 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 20 mm
Shank dia. DCON: 20 mm
Maximum cutting depth APMX: 38 mm
Total length LF: 104 mm
Length, usable LU: 52 mm
Neck dia. DN: 19.6 mm
Chamfer width CHW: 0.35 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000889 - Carbide end mill, 4 flutes, dia. 16 mm, AlTiN/TiSiXN shank HA RF 312.79 EUR "Thanks to their combination of material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid carbide end mills are optimally adapted to the machining of stainless steel and titanium alloys. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 38°/40°
Coating: AlTiN/TiSiXN
Cutting material: TI40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 16 mm
Shank dia. DCON: 16 mm
Maximum cutting depth APMX: 32 mm
Total length LF: 92 mm
Length, usable LU: 42 mm
Neck dia. DN: 15.6 mm
Chamfer width CHW: 0.3 mm
Number of teeth ZEFP: 4x
Standard: factory standard

Advantages:

Full-track milling up to 1xD.
Version with free-cut neck.
Material-specific geometry and coating for use in stainless materials.
Optimised helix angle for improved chip removal.
Optimum temperature control when machining difficult-to-machine materials.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000414 - Carbide end mill, 3 flutes, 2xDC chamfer 0.15 mm 45°, dia. 8 mm, 71.96 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 8 mm
Shank dia. DCON: 8 mm
Maximum cutting depth APMX: 19 mm
Total length LF: 63 mm
Length, usable LU: 25 mm
Neck dia. DN: 7.7 mm
Chamfer width CHW: 0.15 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000411 - Carbide end mill, 3 flutes, 2xDC chamfer 0.05 mm 45°, dia. 4 mm, 53.35 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 4 mm
Shank dia. DCON: 6 mm
Maximum cutting depth APMX: 11 mm
Total length LF: 57 mm
Chamfer width CHW: 0.05 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000410 - Carbide end mill, 3 flutes, 2xDC chamfer 0.05 mm 45°, dia. 3 mm, 53.35 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 3 mm
Shank dia. DCON: 6 mm
Maximum cutting depth APMX: 8 mm
Total length LF: 57 mm
Chamfer width CHW: 0.05 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000416 - Carbide end mill, 3 flutes, 2xDC chamfer 0.25 mm 45°, dia. 12 mm 150.51 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 653.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 12 mm
Shank dia. DCON: 12 mm
Maximum cutting depth APMX: 26 mm
Total length LF: 83 mm
Length, usable LU: 36 mm
Neck dia. DN: 11.7 mm
Chamfer width CHW: 0.25 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000412 - Carbide end mill, 3 flutes, 2xDC chamfer 0.1 mm 45°, dia. 5 mm, 53.35 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 5 mm
Shank dia. DCON: 6 mm
Maximum cutting depth APMX: 13 mm
Total length LF: 57 mm
Chamfer width CHW: 0.1 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000413 - Carbide end mill, 3 flutes, 2xDC chamfer 0.1 mm 45°, dia. 6 mm, 53.35 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 6 mm
Shank dia. DCON: 6 mm
Maximum cutting depth APMX: 13 mm
Total length LF: 57 mm
Length, usable LU: 20 mm
Neck dia. DN: 5.7 mm
Chamfer width CHW: 0.1 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000415 - Carbide end mill, 3 flutes, 2xDC chamfer 0.2 mm 45°, dia. 10 mm, 96.76 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 10 mm
Shank dia. DCON: 10 mm
Maximum cutting depth APMX: 22 mm
Total length LF: 72 mm
Length, usable LU: 30 mm
Neck dia. DN: 9.7 mm
Chamfer width CHW: 0.2 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

PFERD TOOLS PFERD 23000417 - Carbide end mill, 3 flutes, 2xDC chamfer 0.3 mm 45°, dia. 16 mm, 260.07 EUR "Due to their material-specific tool geometry, the Performance Aluminium solid carbide end mills are optimally adapted to the machining of aluminium alloys, non-ferrous metals and plastics. Cutters for versatile use from roughing to finishing. Smooth cylindrical shank HA in accordance with DIN 6535.

Technical data:

Shank shape: HA (DIN6535)
Version: 90° with chamfer
Corner design: corner design chamfer
Spiral angle: 42°
Coating: uncoated
Cutting material: UC40
Internal coolant supply: no
Feed direction: x,y,z
Cutting dia. DC: 16 mm
Shank dia. DCON: 16 mm
Maximum cutting depth APMX: 32 mm
Total length LF: 92 mm
Length, usable LU: 42 mm
Neck dia. DN: 15.6 mm
Chamfer width CHW: 0.3 mm
Number of teeth ZEFP: 3x
Standard: factory standard

Advantages:

Unequal pitch for low-vibration machining with high smoothness.
Large polished chip spaces for optimal chip control.
Increased process reliability at high cutting speeds.

Application recommendations:

Observe the cutting data recommendations.
Ensure that the workpiece and tool clamp are stable in order to achieve the best performance.

Machinable materials:

Aluminium
Brass
Bronze
Copper
Thermosets
Hard aluminium alloys
Hard non-ferrous metal
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Thermoplastics
Tough aluminium alloys

Processing tasks:

Milling

Drive types:

Machining centres

"

SEE OFFER SEE OFFER ebay

promed Modeling Set Basic 60.63 EUR The perfect basic equipment for a complete artificial nail modeling. The set contains: 1 x Tungsten carbide bur, cone1 x carbide bur, rounded cylinder1 x diamond cutter, small cone1 x carbide bur, cylinder

SEE OFFER SEE OFFER ebay

Bausch Diamond milling cutter, cylindrical

Comparison of Similar Products