Arizer Air - Pvc Travel Tube W./ Cap (90mm)

Prodotto
60.46 EUR Consult the complete sheet with in-depth details, compare prices and identify the features of PRODUCTNAME, available at the cost of PRICE CURRENCY; it classifies in the CATEGORY NAME; the seller is SELLER NAME and the manufacturer is MANUFACTURER NAME.

Travel tube for aromatic tube on Arizer Air II / Arizer Solo II / Arizer Go.  

EAN: 0628078801017
Delivery Cost: 58 EUR
Availability: in stock
Delivery Time: FedEx / UPS - Delivery to address
Condition: new

Comparison of Similar Products

Arizer Air - Pvc Travel Tube W./ Cap (110mm) Arizer Air - Pvc Travel Tube W./ Cap (110mm) 62.1 EUR Travel tube for aromatic tube on Arizer Air II / Arizer Solo II / Arizer Go.
Arizer Air - Pvc Travel Tube W./ Cap (70mm) Arizer Air - Pvc Travel Tube W./ Cap (70mm) 60.46 EUR Travel tube for aromatic tube on Arizer Air II / Arizer Solo II / Arizer Go.  
Arizer - Glass Aroma Tube (Including Tip) - 70mm Arizer - Glass Aroma Tube (Including Tip) - 70mm 70.26 EUR A replacement Glass Aroma Tube with Tip for your Arizer Air and Arizer Solo vaporizers. Compatible with the Arizer Air I / II and Arizer Solo I / II
V-TAC VT-216272 - LED tube T8, 14 W, 1400 lm, 4000 K, 900 mm V-TAC VT-216272 - LED tube T8, 14 W, 1400 lm, 4000 K, 900 mm 13.09 EUR LED tube T8 14 W 90 cm nano plastic 4000 K

Product benefits
  • Cost-effective, safe retrofitting solution for T8 tubes
  • Perfectly matches the traditional daylight tube mount
  • Easy installation
  • No lead or mercury content, therefore environmentally friendly
  • No ultraviolet or infrared radiation
  • No flickering
  • Long service life, low maintenance requirements and high energy savings
  • Available in 60 cm, 120 cm, 150 cm & 180 cm
  • No ballast or starter required - direct AC current


Applications
Residential and commercial lighting, offices, supermarkets, shops, hotels & similar environments

General information
  • LED type: SMD
  • Service life: 25,000 hours


Electrical data
  • Output: 14 W
  • Voltage: AC: 220 - 240 V
  • Frequency: 50 Hz
  • Power factor: > 0.7


Simple technical data
  • Beam angle°: 160°
  • Light efficiency (lm/W): 100 lm/W
  • Light colour: natural white
  • Colour temperature: 4000 K
  • Luminous flux (lm): 1400 lm
  • Colour rendering index CRI: > 80
BLULAXA 49430 - LED SMD lamp T30 E14 4 W 400 lm WW 30x90 mm BLULAXA 49430 - LED SMD lamp T30 E14 4 W 400 lm WW 30x90 mm 14.81 EUR This practical LED tube is only 3 cm thick, which allows it to be used in many light fixtures. It is mainly used in ceiling light fixtures with particularly narrow covers, in which an extra narrow energy-saving lamp was previously used. Since this old illuminant is no longer available on the market, these special LEDs can be used to close this gap. Our tube-shaped LEDs are many times more efficient and durable with the same light output.

Product benefits:

  • Powerful alternative to conventional extra-slim energy-saving lamps
  • Wide beam angle of 300° as a highlight
  • Long life of up to 15,000 hours
  • Number of switching cycles is 50,000 (high switching resistance)
  • Immediate full luminous flux (< 0.5 s)
  • Low heat generation
  • Equivalent to 35 watts
PHILIPS PHI 69749800 - T8 LED tube, 8 W, 1050 lm, 4000 K, 600 mm PHILIPS PHI 69749800 - T8 LED tube, 8 W, 1050 lm, 4000 K, 600 mm 23.43 EUR Master LEDtube fluorescent lamp value HO conventional and low-loss rotatable end cap

LED lamp to replace conventional fluorescent lamps for use in private and professional applications. e.g. in corridors, shelving lights, back lights, display cases, parking garages, cold stores, stairwells.

Features:
  • Same length as a 18-watt fluorescent lamp
  • Operation in luminaires for fluorescent lamps with conventional ballast (conventional and low-loss) or for connecting directly to 230 V mains.
  • Includes LED starter jumper
  • Instant start, no flickering when switching on
  • No mercury


Dimensions:
Total length: 600 mm
Arizer - Glass Aroma Tube (Including Tip) - 60mm Arizer - Glass Aroma Tube (Including Tip) - 60mm 70.26 EUR A replacement Glass Aroma Tube with Tip for your Arizer Air and Arizer Solo vaporizers. Compatible with the Arizer Air I / II and Arizer Solo I / II
ATTEN HAG ST-2308D - Hot air blower, 2100 W, 50 - 650 °C ATTEN HAG ST-2308D - Hot air blower, 2100 W, 50 - 650 °C 77.12 EUR The ATTEN AT-A2231 is a hot air gun designed for paint removal, cable shrinking, PVC forming, plastic welding and bending as well as general drying and defrosting purposes.

Functions and features:
  • Slide switch, easy operation between 2 working modes
  • large LCD screen, precise adjustment of air volume and temperature
  • adjustable temperature and air flow preselections
  • Temperature lock function.
  • Temperature range from 50 °C to 650 °C.
  • Overheating protection to prevent damage to the hot air gun and the circuit.
  • Ergonomic, rubberized handle, comfortable to hold.
  • Ideal for shrinking heat-shrink tubing, shrink film, heating PVC, servicing cell phones, etc.


Air flow adjustable from 200 - 500 L/min
SMC PNEUMATIK KQ2C08-00A - Tube cap Ø 8 mm SMC PNEUMATIK KQ2C08-00A - Tube cap Ø 8 mm 11.66 EUR Tube cap
Plug for open tube ends

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2C04-00A - Tube cap Ø 4 mm SMC PNEUMATIK KQ2C04-00A - Tube cap Ø 4 mm 11.45 EUR Tube cap
Plug for open tube ends

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T08-02AS - T-screw connection, R1/4 <> 2x Ø 8 mm SMC PNEUMATIK KQ2T08-02AS - T-screw connection, R1/4 <> 2x Ø 8 mm 14.19 EUR T-screw connection
For branching tubes 90° in both directions to an internal thread (Teflon-coated)

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T06-02AS - T-screw connection, R1/4 <> 2x Ø 6 mm SMC PNEUMATIK KQ2T06-02AS - T-screw connection, R1/4 <> 2x Ø 6 mm 18.14 EUR T-screw connection
For branching tubes 90° in both directions to an internal thread (Teflon-coated)

For nylon, soft nylon, PUR tubes
For water and compressed air
PROMA FHPCU 50X100 - Photo board, laminated paper, one-sided, 50x100mm PROMA FHPCU 50X100 - Photo board, laminated paper, one-sided, 50x100mm 11.4 EUR Photo board

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200.

Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is. With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times.
APPLE MW2K3ZM/A - USB-C power supply unit, 35 W, 2 ports APPLE MW2K3ZM/A - USB-C power supply unit, 35 W, 2 ports 77.08 EUR With the 35-W dual USB-C port power adapter, you can charge two devices simultaneously at home, in the office or on the go. Apple recommends that you use it with a MacBook Air. You can also use it with an iPhone, iPad, Apple Watch and AirPods.

Combine this power supply unit with the travel adapter kit to charge devices in other regions around the world.

Charging cable sold separately.
SMC PNEUMATIK KQ2T08-06A - T-connector, 2x Ø 8 mm <> 1x Ø 6 mm SMC PNEUMATIK KQ2T08-06A - T-connector, 2x Ø 8 mm <> 1x Ø 6 mm 14.08 EUR T-connector with reducing adapter
For branching tubes 90° in both directions with reduction in diameter

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T08-00A - T-connector, 3x Ø 8 mm SMC PNEUMATIK KQ2T08-00A - T-connector, 3x Ø 8 mm 14.4 EUR T-connector
For branching tubes 90° in both directions

For nylon, soft nylon, PUR tubes
For water and compressed air
FREI FHPCU 160X100 - Photo board, laminated paper, one-sided, 160x100mm FREI FHPCU 160X100 - Photo board, laminated paper, one-sided, 160x100mm 13.04 EUR Photo board

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200.

Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is. With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times.
SMC PNEUMATIK KQ2T10-08A - T-connector, 2x Ø 10 mm <> 1x Ø 8 mm SMC PNEUMATIK KQ2T10-08A - T-connector, 2x Ø 10 mm <> 1x Ø 8 mm 20.36 EUR T-connector with reducing adapter
For branching tubes 90° in both directions with reduction in diameter

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T06-04A - T-connector, 2x Ø 6 mm <> 1x Ø 4 mm SMC PNEUMATIK KQ2T06-04A - T-connector, 2x Ø 6 mm <> 1x Ø 4 mm 13.67 EUR T-connector with reducing adapter
For branching tubes 90° in both directions with reduction in diameter

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T04-06A - T-connector, 2x Ø 4 mm <> 1x Ø 6 mm SMC PNEUMATIK KQ2T04-06A - T-connector, 2x Ø 4 mm <> 1x Ø 6 mm 13.93 EUR T-connector with reducing adapter
For branching tubes 90° in both directions with reduction in diameter

For nylon, soft nylon, PUR tubes
For water and compressed air
FREI FHPCU 75X100 - Photo board, laminated paper, one-sided, 75x100 mm FREI FHPCU 75X100 - Photo board, laminated paper, one-sided, 75x100 mm 11.66 EUR Photo board

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200.

Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is. With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times.
SMC PNEUMATIK KQ2T06-00A - T-connector, 3x Ø 6 mm SMC PNEUMATIK KQ2T06-00A - T-connector, 3x Ø 6 mm 13.93 EUR T-connector
For branching tubes 90° in both directions

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T04-00A - T-connector, 3x Ø 4 mm SMC PNEUMATIK KQ2T04-00A - T-connector, 3x Ø 4 mm 13.72 EUR T-connector
For branching tubes 90° in both directions

For nylon, soft nylon, PUR tubes
For water and compressed air
FREI FHPCU 150X100 - Photo board, laminated paper, single-sided, 150x100 mm FREI FHPCU 150X100 - Photo board, laminated paper, single-sided, 150x100 mm 12.84 EUR Photo board

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200.

Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is. With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times.
SMC PNEUMATIK KQ2T10-00A - T-connector, 3x Ø 10 mm SMC PNEUMATIK KQ2T10-00A - T-connector, 3x Ø 10 mm 13.86 EUR T-connector
For branching tubes 90° in both directions

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T08-10A - T-connector, 2x Ø 8 mm <> 1x Ø 10 mm SMC PNEUMATIK KQ2T08-10A - T-connector, 2x Ø 8 mm <> 1x Ø 10 mm 14.71 EUR T-connector with reducing adapter
For branching tubes 90° in both directions with reduction in diameter

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK KQ2T12-10A - T-connector, 2x Ø 12 mm <> 1x Ø 10 mm SMC PNEUMATIK KQ2T12-10A - T-connector, 2x Ø 12 mm <> 1x Ø 10 mm 17.19 EUR T-connector with reducing adapter
For branching tubes 90° in both directions with reduction in diameter

For nylon, soft nylon, PUR tubes
For water and compressed air
FREI FE2CU 150X200 - Photo board, epoxyd, double-sided, 150x200 mm FREI FE2CU 150X200 - Photo board, epoxyd, double-sided, 150x200 mm 19.51 EUR Photo board, epoxyd, double-sided

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200, at 25 - 30°C in 25 - 90s depending on how fresh the bath is.

With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times
FREI FE2CU 160X100 - Photo board, epoxyd, double-sided, 160x100 mm FREI FE2CU 160X100 - Photo board, epoxyd, double-sided, 160x100 mm 14.55 EUR Photo board, epoxyd, double-sided

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15 mi
500W Nitraphot 6 - 7 mi
At a distance of approx. 30 cm and max. format 150x200, at 25 - 30°C in 25 - 90s depending on how fresh the bath is.

With a fresh ammonium persulphate batch of 40 - 50°C: 5 - 10 minutes. Please see our catalogue for more information on exposure and etching times
MEAN WELL MW RSP-200-12 - power supply, PFC, 200W, 12V/16,7A MEAN WELL MW RSP-200-12 - power supply, PFC, 200W, 12V/16,7A 50.47 EUR Features:
• Universal AC input / Full range
• Built-in active PFC function, PF>0.95
• High efficiency up to 90%
• Protections: Short circuit / Overload / Over voltage / Over temperature
• Cooling by free air convection
• 1U low profile 30mm
• Optional conformal coating models
• LED indicator for power on

Technical data:
Output voltage: 12 V DC
Output voltage-range: 10 - 13,2 V
Output current: 16,7 A
Power: 200 W
Ripple & Noise: 150 mVp-p
Input voltage: 88 - 264VAC / 124 - 370VDC
Efficiency: 89%
Inrush current, max.: 20A/115VAC / 40A/230VAC
Working temp.: -40 … +85 °C
Dimension: 215 x 115 x 30 mm
weight: 0,72 kg
RADEMACHER FEPCU 300X250 - Photo board, epoxyd, single-sided, 300x250 mm RADEMACHER FEPCU 300X250 - Photo board, epoxyd, single-sided, 300x250 mm 28.04 EUR Epoxy board 1,5mm, one-sided Cu 35µm, photo positive method

Exposure times:
30W UV tubes 60-90s
1000W halogenl. 45-70s
250W Nitraphot 12-15min
500W Nitraphot 6- 7min
with approx. 30cm distance and max. format 150x200.

Development times: at 25-30°C in 25-90s depending on the freshness of the bath.
Etching times: At freshly prepared ammonium persulfate bath of 40-50°C: 5-10min.
BUNGARD FEPCU 300X200 - Photo board, epoxyd, single-sided, 300x200 mm BUNGARD FEPCU 300X200 - Photo board, epoxyd, single-sided, 300x200 mm 19.15 EUR Epoxyd board 1.5 mm, one-sided Cu 35µm,

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15min
500W Nitraphot 6 - 7min
At a distance of approx. 30 cm and max. format 150x200.

Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is.
Etching times: with a fresh ammonium persulphate bath at 40 - 50°C: 5 - 10 minutes. Please see our main catalogue for more information on exposure and etching times
BUNGARD FEPCU 150X100 - Photo board, epoxyd, single-sided, 150x100 mm BUNGARD FEPCU 150X100 - Photo board, epoxyd, single-sided, 150x100 mm 12.84 EUR Epoxyd board 1.5 mm, one-sided Cu 35µm,

Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15min
500W Nitraphot 6 - 7min
At a distance of approx. 30 cm and max. format 150x200.

Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is.
Etching times: with a fresh ammonium persulphate bath at 40 - 50°C: 5 - 10 minutes. Please see our main catalogue for more information on exposure and etching times
SMC PNEUMATIK KQ2L08-99A - Reducing adapter, angled, Ø 8 mm <> Ø 8 mm SMC PNEUMATIK KQ2L08-99A - Reducing adapter, angled, Ø 8 mm <> Ø 8 mm 12.11 EUR Plug-in reducing adapter, angled
For reducing the diameter of plug connections
90° change in connection direction of plug connections

For nylon, soft nylon, PUR tubes
For water and compressed air
SMC PNEUMATIK SY31605LOUM5Q - Solenoid valve 5/2, 24 VDC 150 l/min, mono SMC PNEUMATIK SY31605LOUM5Q - Solenoid valve 5/2, 24 VDC 150 l/min, mono 82.2 EUR Solenoid valve 5/2, for compressed air, monostable
Tube version with individual wiring
Manual auxiliary operation cannot be locked

Power consumption: max. 0.6 W
Operating frequency: max. 10 Hz
Electrical connection: plug
SMC PNEUMATIK SY51205LOU01FQ - Solenoid valve 5/2, 24 VDC 450 l/min, mono SMC PNEUMATIK SY51205LOU01FQ - Solenoid valve 5/2, 24 VDC 450 l/min, mono 83.54 EUR Solenoid valve 5/2, for compressed air, monostable
Tube version with individual wiring
Manual auxiliary operation cannot be locked

Power consumption: max. 0.6 W
Operating frequency: max. 10 Hz
Electrical connection: plug
SMC PNEUMATIK SY31205LOUM5Q - Solenoid valve 5/2, 24 VDC 200 l/min, mono SMC PNEUMATIK SY31205LOUM5Q - Solenoid valve 5/2, 24 VDC 200 l/min, mono 74.76 EUR Solenoid valve 5/2, for compressed air, monostable
Tube version with individual wiring
Manual auxiliary operation cannot be locked

Power consumption: max. 0.6 W
Operating frequency: max. 10 Hz
Electrical connection: plug
SMC PNEUMATIK SY5120-5YO-01F-Q - Solenoid valve 5/2, 24 VDC 450 l/min, mono SMC PNEUMATIK SY5120-5YO-01F-Q - Solenoid valve 5/2, 24 VDC 450 l/min, mono 81.79 EUR Solenoid valve 5/2, for compressed air, monostable
Tube version with individual wiring
Manual auxiliary operation cannot be locked

Power consumption: max. 0.6 W
Operating frequency: max. 10 Hz
Electrical connection: DIN plug
SMC PNEUMATIK SY7120-5YO-02F-Q - Solenoid valve 5/2, 24 VDC 800 l/min, mono SMC PNEUMATIK SY7120-5YO-02F-Q - Solenoid valve 5/2, 24 VDC 800 l/min, mono 90.52 EUR Solenoid valve 5/2, for compressed air, monostable
Tube version with individual wiring
Manual auxiliary operation cannot be locked

Power consumption: max. 0.6 W
Operating frequency: max. 10 Hz
Electrical connection: DIN plug